| 3471432 | 123851 | None | Item No. 1.14.1 Page No. 8 Vol.1 PWD SR | KSRB 1-1.14.1: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. | Cum | 107.1 | 107.1 | 253.9 | False | None | None | False | None | False | 27192.69 | 0 |
| 3471433 | 123851 | None | Item No. 2.1.2 Page No. 15 Vol.1 PWD SR | KSRB 2-2.1.2: Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork shall be paid separately. Specification No. KBS 2.1, | Cum | 5947.2 | 5947.2 | 200.33 | False | None | None | False | None | False | 1191402.576 | 0 |
| 3471434 | 123851 | None | Item No. 2.3.2 Page No. 16 Vol.1 PWD SR | KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Specification No. KBS 2.3., 2.3 Footing | Cum | 7322.4 | 7322.4 | 63.55 | False | None | None | False | None | False | 465338.52 | 0 |
| 3471435 | 123851 | None | Item No. 2.3.2 Page No. 16 Vol.1 PWD SR | KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Specification No. KBS 2.3., 2.3 Column Base | Cum | 11340.0 | 11340.0 | 31.72 | False | None | None | False | None | False | 359704.8 | 0 |
| 3471436 | 123851 | None | Item No. 2.3.2 Page No. 16 Vol.1 PWD SR | KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Specification No. KBS 2.3., 2.3 Hall Grade slab | Cum | 7322.4 | 7322.4 | 244.34 | False | None | None | False | None | False | 1789155.216 | 0 |
| 3471437 | 123851 | None | Item No. 2.2.3 Page No. 15 Vol.1 PWD SR | KSRB 2-2.2.3.1 :Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9820.8 | 9820.8 | 20.13 | False | None | None | False | None | False | 197692.704 | 0 |
| 3471438 | 123851 | None | Item No. 2.11 Page No. 18 Vol.1 PWD SR | KSRB 2.11 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and
technical specification. | Tonne | 93929.85 | 93929.85 | 21.7629 | False | None | None | False | None | False | 2044185.932565 | 0 |
| 3471439 | 123851 | None | Item No. 5.4 Page No. 9 Vol.2 PWD SR | KSRB 5-5.4: Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . | Cum | 6708.45 | 6708.45 | 91.28 | False | None | None | False | None | False | 612347.316 | 0 |
| 3471440 | 123851 | None | Item No. 1.8 Page No. 7 Vol.1 PWD SR | KSRB 1-1.8: Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work | Cum | 497.7 | 497.7 | 728.66 | False | None | None | False | None | False | 362654.082 | 0 |
| 3471441 | 123851 | None | Item No. 6.33 Page No. 17 Vol.2 PWD SR | KSRB 6-6.33: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1292.55 | 1292.55 | 428.76 | False | None | None | False | None | False | 554193.738 | 0 |
| 3471442 | 123851 | None | Item No. 8.3.1, Page No. 41, Vol.2 | KSRB 8-8.3.1: Providing 15mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 309.75 | 309.75 | 892.27 | False | None | None | False | None | False | 276380.6325 | 0 |
| 3471443 | 123851 | None | Item No. 11.2, Page No. 77, Vol.2 | Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge. mAIN rOOFING | Kgs | 118.65 | 118.65 | 78600.0 | False | None | None | False | None | False | 9325890.0 | 0 |
| 3471444 | 123851 | None | Item No. 7.69.3, Page No. 38, Vol.2 | Providing and fixing Aluminium Turbo ventilator complete as per technical
specifications Non Power Driven with 1.3mm thickness and 38 No.s of Vanes & turbine doom thickness 1mm and total weight not less than 6kg for Industrial use for area upto 100m2 for Industrial use | No | 5880.0 | 5880.0 | 10.0 | False | None | None | False | None | False | 58800.0 | 0 |
| 3471445 | 123851 | None | Item No. 7.38, Page No. 26, Vol.2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 596.4 | 596.4 | 3159.55 | False | None | None | False | None | False | 1884355.62 | 0 |
| 3471446 | 123851 | None | Item No. 8.51, Page No. 50, Vol.2 | KSRB 8-8.51 : Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. | Sqm | 105.0 | 105.0 | 892.27 | False | None | None | False | None | False | 93688.35 | 0 |
| 3471447 | 123851 | None | Item No. 8.54.1, Page No. 50, Vol.2 | KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge. | Sqm | 76.65 | 76.65 | 432.91 | False | None | None | False | None | False | 33182.5515 | 0 |
| 3471448 | 123851 | None | Item No. 8.54.1, Page No. 50, Vol.2 | KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge. | Sqm | 76.65 | 76.65 | 395.87 | False | None | None | False | None | False | 30343.4355 | 0 |
| 3471449 | 123851 | None | Item No. 11.6.1, Page No. 76, Vol.2 | KSRB 11-11.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 2764.65 | 2764.65 | 57.38 | False | None | None | False | None | False | 158635.617 | 0 |
| 3471450 | 123851 | None | Item No. 11.8.4, Page No. 77, Vol.2 | KSRB 11-11.8.4:Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Each | 25920.3 | 25920.3 | 3.0 | False | None | None | False | None | False | 77760.9 | 0 |
| 3471451 | 123851 | None | Item No. 11.35.1.1, Page No. 87, Vol.2 | KSRB 11-11.35.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. | Kg | 474.6 | 474.6 | 690.0 | False | None | None | False | None | False | 327474.0 | 0 |
| 3471452 | 123851 | None | 001 | 02 00 105-RCC Pole 9.0M Long 145 kg WL Digging of Pits 1.8 mtr depth for errection of 9 to 10 mtr Long Steel RCC PSC supports as per approved Drawing - Ordinary Soil Erection of RCC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth. - Ordinary Soil | Nos | 8598.45 | 8598.45 | 1.0 | False | None | None | False | None | False | 8598.45 | 0 |
| 3471453 | 123851 | None | 002 | 02 00 103-RCC Pole-8.0M Long 115 kg WL Digging of Pits 1.5 mtr depth for errection of 7.5/8 mtr Long Steel/RCC/PSC/PCC supports as per approved Drawing - Ordinary Soil Erection of RCC poles of 7.5 to 8 mtr long in pit of 1.5 mtr depth - Ordinary Soil | Nos | 6881.7 | 6881.7 | 1.0 | False | None | None | False | None | False | 6881.7 | 0 |
| 3471454 | 123851 | None | 003 | 11kV Horizontal CrossArm with single top support, clamp, Bolt & Nuts with washers for RCC Poles- MS Fixing of V-Shape /Horizontal cross arm including single top support Braces and Insulatorsfixing.-OrdinarySoil | Set | 948.15 | 948.15 | 2.0 | False | None | None | False | None | False | 1896.3 | 0 |
| 3471455 | 123851 | None | 004 | Double Pole Structure Complete including 5KG 8-SWGG.I .wire for Structure Grounding For 9Mtr RCC Poles145kg WL (with pole) Digging of Pits 1.8mtr depth for errection of 9 to 10mtr Long Steel /RCC /PSC support sas perapproved Drawing OrdinarySoil Erection of 2pole structure formed out of SMrails or I Beam of sizes 200x100175x90 mm, 225x100mm of using RCC poles 9mtr to 10mtr long inpits of 1.8mtr depth for line deviation with necessary foundation, inclusive of fixing of cross Arms Braces, Strain Insulators OrdinarySoil | Set | 27636.0 | 27636.0 | 1.0 | False | None | None | False | None | False | 27636.0 | 0 |
| 3471456 | 123851 | None | 005 | 0281683 Spiral Earth Electrode Providing spiral earth electrode type earthing along with pole (withoutcharcoal saltetc.,) OrdinarySoil | Nos | 348.6 | 348.6 | 3.0 | False | None | None | False | None | False | 1045.8 | 0 |
| 3471457 | 123851 | None | 006 | Guy set with 2Nos. 15 strain insulator & Concreting materials as per Drwg No.BESCOM/GM/CP/7/Dt; 24.10.07 Digging of Pit for GUY SET - Ordinary Soil Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) but using 2 strain insulators (No.15) for - Anticlimbing D - Ordinary Soil | Set | 1958.25 | 1958.25 | 2.0 | False | None | None | False | None | False | 3916.5 | 0 |
| 3471458 | 123851 | None | 007 | 2 Pin Cross Arm with pole clamp, bolts & nuts & washers for RCC Pole - MS Fixing of 2 Pin cross arm with insulator and Braces fixing - Ordinary Soil | Set | 447.3 | 447.3 | 2.0 | False | None | None | False | None | False | 894.6 | 0 |
| 3471459 | 123851 | None | 008 | 02 83 320-Silcon rubber composite disk insulator/11kV 45 kN Polymeric insulator | Nos | 195.3 | 195.3 | 6.0 | False | None | None | False | None | False | 1171.8 | 0 |
| 3471460 | 123851 | None | 009 | 02 83 007-11kV Pin Insulator (Both Shell and G.I. Pin) - Polymeric | Nos | 215.25 | 215.25 | 6.0 | False | None | None | False | None | False | 1291.5 | 0 |
| 3471461 | 123851 | None | 011 | HT Single Top Support Set with Bolts Nut and Washers Fixing of HT/LT single top support . - Ordinary Soil | Set | 264.6 | 264.6 | 3.0 | False | None | None | False | None | False | 793.8 | 0 |
| 3471462 | 123851 | None | 011 | 02 81 010-10 SWG G.I.Wire | Kg | 83.12 | 83.12 | 10.0 | False | None | None | False | None | False | 831.2 | 0 |
| 3471463 | 123851 | None | 012 | 02 79 150-H Frame for GOS 400 Amps Erection of H Frame. - Ordinary Soil | Set | 6713.7 | 6713.7 | 1.0 | False | None | None | False | None | False | 6713.7 | 0 |
| 3471464 | 123851 | None | 013 | 03 04 212-11kV 200Amps
Single Break GOS Fixing of GOS including wiring g (11kV SB 200A) - Ordinary Soil | Set | 11081.7 | 11081.7 | 1.0 | False | None | None | False | None | False | 11081.7 | 0 |
| 3471465 | 123851 | None | 014 | 08 21 900-Transparent Alkathine tube 19mm dia 2mm thick in coils of 30 mtrs | Coil | 542.85 | 542.85 | 2.0 | False | None | None | False | None | False | 1085.7 | 0 |
| 3471466 | 123851 | None | 015 | 03 03 201-10KV 5kA LA Polymeric type with GROUND DISCONNECTOR Fixing of lightning arrestors including wiring. - Ordinary Soil | Set | 5114.56 | 5114.56 | 1.0 | False | None | None | False | None | False | 5114.56 | 0 |
| 3471467 | 123851 | None | 016 | 03 58 351-11kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3CT & 3PTs, With Transparent Cover TTB, Modem and 2 Nos of Meters for 3Ph 4 Wire Metering without Load Break Switch Erection of HT metering Cubicle on Platform. - Ordinary Soil | Nos | 257581.8 | 257581.8 | 1.0 | False | None | None | False | None | False | 257581.8 | 0 |
| 3471468 | 123851 | None | 017 | 05 06 492-Load Break Switches with pannel10.541Transmissionplant Transformershavingratingof100KVAandabove | Nos | 76900.95 | 76900.95 | 1.0 | False | None | None | False | None | False | 76900.95 | 0 |
| 3471469 | 123851 | None | 018 | Earthing Material Set Digging of pit. For providing GI Pipe type Earthing - Ordinary Soil Providing GI Pipe Earthing for lightning arresters Transformer Neutral and Transformer Metal parts (Excluding digging of pits) - Ordinary Soil | Set | 2811.9 | 2811.9 | 4.0 | False | None | None | False | None | False | 11247.6 | 0 |
| 3471470 | 123851 | None | 019 | 03 21 473-250 kVA,
Aluminium Wdg, Star 2 (5 Star) Cable Entry Type Distribution Transformer - 3 Phase, 11kV/433V - Stacked Core with Oil. | Nos | 569830.8 | 569830.8 | 1.0 | False | None | None | False | None | False | 569830.8 | 0 |
| 3471471 | 123851 | None | 020 | Providing chain link fencing 50mm size of 8 guage properly stretched between rectangular poles andfixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and bottomas required including cost of all materials, la | Sqm | 1026.9 | 1026.9 | 30.0 | False | None | None | False | None | False | 30807.0 | 0 |
| 3471472 | 123851 | None | 021 | Construction of platform with size stone, cement concert for erection of 500 kVA Transformer/Heavy Equipment.Construction of platform (1.5x1.5x1.2) mtr in size stone, for erection of transformers/Heavy equipment including all materials, labour.Excavation of (1.5x1.5x1.2)10.612 UndergroundCables-cableductsystem | Strings | 27721.05 | 27721.05 | 1.0 | False | None | None | False | None | False | 27721.05 | 0 |
| 3471473 | 123851 | None | 022 | 02 87 400-11kV, 3 Core, XLPE HTUG Cable (ROUND Armoured) 95 Sqmm | Km | 934149.3 | 934149.3 | 0.11 | False | None | None | False | None | False | 102756.423 | 0 |
| 3471474 | 123851 | None | 023 | 02 87 214 Armoured L.T.UG Cable 1.1kV Class
185Sq.mm 3.5 core | Km | 725778.9 | 725778.9 | 0.11 | False | None | None | False | None | False | 79835.679 | 0 |
| 3471475 | 123851 | None | 024 | 02 88 302 Heat Shrinkable outdoor type cable termination kit for XLPE cable 3X95 Sq.mm(11 KV) Making and Fixing pot head for HT Cable only Heat shrinkable type - 3x300 to 3x400 Sqmm Ordinary Soil | Set | 7061.25 | 7061.25 | 2.0 | False | None | None | False | None | False | 14122.5 | 0 |
| 3471476 | 123851 | None | 025 | 02 88 332-Heat Shrinkable indoor type cable termination kit for XLPE cable 3X95 Sq.mm(11 KV) Making and Fixing pot head for HT Cable only Heat shrinkable type - 3x300 to 3x400 Sqmm - Ordinary Soil | Set | 6722.1 | 6722.1 | 6.0 | False | None | None | False | None | False | 40332.6 | 0 |
| 3471477 | 123851 | None | 026 | 07 68 052-GI Pipe 100 mm dia Laying the GI Pipe 80mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete. - Ordinary Soil | m | 1394.4 | 1394.4 | 20.0 | False | None | None | False | None | False | 27888.0 | 0 |
| 3471478 | 123851 | None | 5.42.2 | Fabricating supplying and mounting MS box made out SWG.suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.18 SWG | Sq CM | 0.4 | 0.4 | 90000.0 | False | None | None | False | None | False | 36000.0 | 0 |
| 3471479 | 123851 | None | 5.52.8 | Supply and fixing of 3-pole Capacitor switching contactor with NO/NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush current , fixed on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC 690V Rating operational voltage,.50HZ frequency and as per IS 60947-4-1. 80 KVAR | Each | 23377.2 | 23377.2 | 4.0 | False | None | None | False | None | False | 93508.8 | 0 |
| 3471480 | 123851 | None | 5.39 | Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three phase LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect/ disconnect banks, with automatic recognition or with standard.programs | Each | 22722.0 | 22722.0 | 1.0 | False | None | None | False | None | False | 22722.0 | 0 |
| 3471481 | 123851 | None | 5.37 | Supplying, fixing andwiring heavy duty lowvoltage capacitors conforming toIS2834. 3phase, 400/440Vgrade, for power factor improvement of rotating machineries like induction motor. | Kvar | 105.0 | 105.0 | 480.0 | False | None | None | False | None | False | 50400.0 | 0 |
| 3471482 | 123851 | None | 51.04 | Rod type of earthing using 40 mm Dia, 3 Mtr long MS
rod as ground rod, in earth pit of 300 mm width and
3300 mm depth and using 50x6 mm flat welded to
ground rod as terminal & connected to equipment
ground terminal using PVC Al wire as specified
281685 No 1910 2172 | Nos | 2280.6 | 2280.6 | 3.0 | False | None | None | False | None | False | 6841.8 | 0 |
| 3471483 | 123851 | None | 51.05 | Bentonite clay slurry for earthing in 50 Kg Bag
| Bag | 386.4 | 386.4 | 3.0 | False | None | None | False | None | False | 1159.2 | 0 |
| 3471484 | 123851 | None | 5.53 | Supply and fixing of Auxiliary contactor relay with 2 NO and 2 NC contact and operating coil voltage of 220V to 260V. fixed on existing wood/panel board using necessary bolts, nuts,.washers and wiring etc., | Each | 1396.5 | 1396.5 | 8.0 | False | None | None | False | None | False | 11172.0 | 0 |
| 3471485 | 123851 | None | 5.40.3 | Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS.specification with necessary bolts, nuts and washers etc., complete, 400 A 4 x 50 x 10 mm Aluminium Strips | m | 4667.25 | 4667.25 | 10.0 | False | None | None | False | None | False | 46672.5 | 0 |
| 3471486 | 123851 | None | 035 | Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS.specification with necessary bolts, nuts and washers etc., complete, 100 A 4 x 30 x 6 mm Aluminium Strips | m | 2588.25 | 2588.25 | 20.0 | False | None | None | False | None | False | 51765.0 | 0 |
| 3471487 | 123851 | None | 5.15.9 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 100 A 25 kA | Each | 8911.35 | 8911.35 | 8.0 | False | None | None | False | None | False | 71290.8 | 0 |
| 3471488 | 123851 | None | 5.21 | Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on.DIN rail/ flush mounting on panel board. | Each | 9717.75 | 9717.75 | 1.0 | False | None | None | False | None | False | 9717.75 | 0 |
| 3471489 | 123851 | None | 5.27 | Supplying, fixing and wiring rotary selector switch suitable for.Ammeter | Each | 210.0 | 210.0 | 3.0 | False | None | None | False | None | False | 630.0 | 0 |
| 3471490 | 123851 | None | 5.28 | Supplying, fixing and wiring rotary selector switch suitable for.Voltmeter | Each | 168.0 | 168.0 | 3.0 | False | None | None | False | None | False | 504.0 | 0 |
| 3471491 | 123851 | None | 5.34 | Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current.Transformer Class 0.5 accuracy with Tape Wound. | Each | 590.1 | 590.1 | 3.0 | False | None | None | False | None | False | 1770.3 | 0 |
| 3471492 | 123851 | None | 5.38 | Supplying and fixing of LED type panel board indicating lamp.with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. | Each | 540.75 | 540.75 | 3.0 | False | None | None | False | None | False | 1622.25 | 0 |
| 3471493 | 123851 | None | 5.15.16 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 400 A 36 kA | Each | 29626.8 | 29626.8 | 1.0 | False | None | None | False | None | False | 29626.8 | 0 |
| 3471494 | 123851 | None | 5.18.9 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC.60898.50-63 A TPN | Each | 3242.4 | 3242.4 | 5.0 | False | None | None | False | None | False | 16212.0 | 0 |
| 3471495 | 123851 | None | 5.53 | Supply and fixing of Auxiliary contactor relay with 2 NO and 2 NC contact and operating coil voltage of 220V to 260V. fixed on existing wood/panel board using necessary bolts, nuts,.washers and wiring etc., | Each | 1396.5 | 1396.5 | 3.0 | False | None | None | False | None | False | 4189.5 | 0 |
| 3471496 | 123851 | None | 5.18.4 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC.60898. 6-32 A DP | Each | 775.95 | 775.95 | 10.0 | False | None | None | False | None | False | 7759.5 | 0 |
| 3471497 | 123851 | None | 5.33 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy | Each | 9780.75 | 9780.75 | 1.0 | False | None | None | False | None | False | 9780.75 | 0 |
| 3471498 | 123851 | None | 5.41.2 | Supplying and fixing angle iron frame work fabricated out of M.S.angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm | m | 414.75 | 414.75 | 25.0 | False | None | None | False | None | False | 10368.75 | 0 |
| 3471499 | 123851 | None | 32.08 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm) | Km | 188836.2 | 188836.2 | 0.2 | False | None | None | False | None | False | 37767.24 | 0 |
| 3471500 | 123851 | None | 32.03 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.10 Sqmm, 4 Core, (10 GI Strips - 4 x 0.8 mm) | Km | 123904.2 | 123904.2 | 0.2 | False | None | None | False | None | False | 24780.84 | 0 |
| 3471501 | 123851 | None | 21.05 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 2.5 to 25 Sqmm | Km | 21930.3 | 21930.3 | 0.4 | False | None | None | False | None | False | 8772.12 | 0 |
| 3471502 | 123851 | None | 66.04 | HDPE/PLB Pipe 50/42 mm | Km | 89264.7 | 89264.7 | 0.1 | False | None | None | False | None | False | 8926.47 | 0 |
| 3471503 | 123851 | None | 1.92 | Supplying PVC flexible conduit pipe . mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely.25 mm . | m | 23.1 | 23.1 | 150.0 | False | None | None | False | None | False | 3465.0 | 0 |
| 3471504 | 123851 | None | 1.1.2 | Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.25 mm dia 2 mm thick . | m | 85.05 | 85.05 | 450.0 | False | None | None | False | None | False | 38272.5 | 0 |
| 3471505 | 123851 | None | 1.1.1 | Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.19/20 mm dia 2 mm thick . KPWD Comman SR 2023-24 Item No: 1.1.1 | m | 72.45 | 72.45 | 250.0 | False | None | None | False | None | False | 18112.5 | 0 |
| 3471506 | 123851 | None | 1.5.1 | Supplying and fixing PVC metal conduit Deep junction box19 20 mm deep Junction box . | Each | 51.45 | 51.45 | 30.0 | False | None | None | False | None | False | 1543.5 | 0 |
| 3471507 | 123851 | None | 1.5.2 | Supplying and fixing PVC/metal conduit Deep junction box.25 mm deep Junction box . KPWD Comman SR 2023-24 Item No: 1.5.2 | Each | 58.8 | 58.8 | 30.0 | False | None | None | False | None | False | 1764.0 | 0 |
| 3471508 | 123851 | None | 1.5.3 | Supplying and fixing PVC/metal conduit Deep junction box32 mm deep Junction box . KPWD Comman SR 2023-24 Item No: 1.5.3 | Each | 64.05 | 64.05 | 30.0 | False | None | None | False | None | False | 1921.5 | 0 |
| 3471509 | 123851 | None | 2.5.23 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for.working voltage upto 1100 Volts as per IS-694:1990. 4C x 6 mm2 . KPWD Comman SR 2023-24 Item No: 2.5.23 | m | 344.4 | 344.4 | 40.0 | False | None | None | False | None | False | 13776.0 | 0 |
| 3471510 | 123851 | None | 2.5.16 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for.working voltage upto 1100 Volts as per IS-694:1990. 4C x 4 mm2 . KPWD Comman SR 2023-24 Item No: 2.5.16 | m | 236.25 | 236.25 | 40.0 | False | None | None | False | None | False | 9450.0 | 0 |
| 3471511 | 123851 | None | 1.7.2 | Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto.wall surface complete. upto 50 mm conduit CC floor . KPWD Comman SR 2023-24 Item No: 1.7.2 | m | 72.45 | 72.45 | 150.0 | False | None | None | False | None | False | 10867.5 | 0 |
| 3471512 | 123851 | None | 1.7.1 | Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto.wall surface complete. upto 50 mm conduit in brick wall . KPWD Comman SR 2023-24 Item No: 1.7.1 | m | 30.45 | 30.45 | 150.0 | False | None | None | False | None | False | 4567.5 | 0 |
| 3471513 | 123851 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010. 1.5 mm2 | m | 27.3 | 27.3 | 1000.0 | False | None | None | False | None | False | 27300.0 | 0 |
| 3471514 | 123851 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010.2.5 mm2 | m | 44.1 | 44.1 | 750.0 | False | None | None | False | None | False | 33075.0 | 0 |
| 3471515 | 123851 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010.4 mm2 . | m | 66.15 | 66.15 | 300.0 | False | None | None | False | None | False | 19845.0 | 0 |
| 3471516 | 123851 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 6 mm2 . | m | 96.6 | 96.6 | 300.0 | False | None | None | False | None | False | 28980.0 | 0 |
| 3471517 | 123851 | None | 3.3.6 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs,.Machine/NF screws etc., complete.10-12 Way . KPWD Comman SR 2023-24 Item No: 3.3.6 | Each | 274.05 | 274.05 | 20.0 | False | None | None | False | None | False | 5481.0 | 0 |
| 3471518 | 123851 | None | 3.3.7 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs,.Machine/NF screws etc., complete. 16 Way . KPWD Comman SR 2023-24 Item No: 3.3.7 | Each | 308.7 | 308.7 | 15.0 | False | None | None | False | None | False | 4630.5 | 0 |
| 3471519 | 123851 | None | 3.3.8 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs,.Machine/NF screws etc., complete.18 Way . KPWD Comman SR 2023-24 Item No: 3.3.8 | Each | 355.95 | 355.95 | 10.0 | False | None | None | False | None | False | 3559.5 | 0 |
| 3471520 | 123851 | None | 3.3.5 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs,.Machine/NF screws etc., complete.8 Way . KPWD Comman SR 2023-24 Item No: 3.3.5 | Each | 229.95 | 229.95 | 10.0 | False | None | None | False | None | False | 2299.5 | 0 |
| 3471521 | 123851 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing.metal/PVC box.8 Module . KPWD Comman SR 2023-24 Item No: 3.5.5 | Each | 298.2 | 298.2 | 10.0 | False | None | None | False | None | False | 2982.0 | 0 |
| 3471522 | 123851 | None | 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing.metal/PVC box.10-12 Module . KPWD Comman SR 2023-24 Item No: 3.5.6 | Each | 361.2 | 361.2 | 20.0 | False | None | None | False | None | False | 7224.0 | 0 |
| 3471523 | 123851 | None | 3.5.7 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing.metal/PVC box.16 Module . KPWD Comman SR 2023-24 Item No: 3.5.7 | Each | 416.85 | 416.85 | 15.0 | False | None | None | False | None | False | 6252.75 | 0 |
| 3471524 | 123851 | None | 3.5.8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing.metal/PVC box.18 Module . KPWD Comman SR 2023-24 Item No: 3.5.8 | Each | 479.85 | 479.85 | 10.0 | False | None | None | False | None | False | 4798.5 | 0 |
| 3471525 | 123851 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on.existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch . KPWD Comman SR 2023-24 Item No: 3.6.1 | Each | 107.1 | 107.1 | 40.0 | False | None | None | False | None | False | 4284.0 | 0 |
| 3471526 | 123851 | None | 3.6.7 | Supplying and fixing of modular switch & connected accessories on.existing modular switch plate as per IS 3854 and IS 1293.16A One Way Switch . KPWD Comman SR 2023-24 Item No: 3.6.7 | Each | 189.0 | 189.0 | 10.0 | False | None | None | False | None | False | 1890.0 | 0 |
| 3471527 | 123851 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessories on.existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket . KPWD Comman SR 2023-24 Item No: 40243 | Each | 247.8 | 247.8 | 20.0 | False | None | None | False | None | False | 4956.0 | 0 |
| 3471528 | 123851 | None | 3.13.4 | Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V PLUG.32A . KPWD Comman SR 2023-24 Item No: 3.13.4 | Each | 640.35 | 640.35 | 6.0 | False | None | None | False | None | False | 3842.1 | 0 |
| 3471529 | 123851 | None | 3.13.8 | Supplying and fixing of metal clad industrial plugs and sockets. 32A . KPWD Comman SR 2023-24 Item No: 3.13.8 | Each | 869.21 | 869.21 | 6.0 | False | None | None | False | None | False | 5215.26 | 0 |
| 3471530 | 123851 | None | 3.14.12 | Supplying And fixing/replacing of 6/16/32A electrical.accessories on existing switch board.16A Three Way 5 Pin Socket . | No | 120.75 | 120.75 | 8.0 | False | None | None | False | None | False | 966.0 | 0 |
| 3471531 | 123851 | None | 6.2.2 | Supplying of 1440rpm heavy duty exhaust fan with bracket blades.suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450 mm) | Each | 4668.3 | 4668.3 | 5.0 | False | None | None | False | None | False | 23341.5 | 0 |
| 3471532 | 123851 | None | 11.8.4 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection Min 5KV along with Over voltage Overload, short circuit miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50 60Hz application. Compliance to IS 10322 IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 1301m w, nominal CRI 75. Luminaire manufacturer should have in house facility accredited by NABL CPRI any Government certified agency & Design Development facility certified by ISO 9001 2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer Cree Nichia Lumileds Osram make LED Source. LED Streetlight 90w | Each | 9303.0 | 9303.0 | 4.0 | False | None | None | False | None | False | 37212.0 | 0 |
| 3471533 | 123851 | None | 11.9.2 | Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System.Power consumption. LED Efficiency 1301mw, nominal CRI 75. Luminaire manufacturer should have in house facility accredited by NABL CPRI & any Government certified agency & Design Development facility certified by ISO 9001 2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree Nichia Lumileds Osram make LED Source.LED Floodlight 100W | Each | 9960.3 | 9960.3 | 6.0 | False | None | None | False | None | False | 59761.8 | 0 |
| 3471534 | 123851 | None | 11.8.3 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency1301mw, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer Cre Nichia Lumileds Osram make LED Source.LED Streetlight 70W | Each | 6291.6 | 6291.6 | 8.0 | False | None | None | False | None | False | 50332.8 | 0 |
| 3471535 | 123851 | None | 13.2.1 | Supplying and Fixing.mm dia clampsss A GI pipe bracket upto.2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV SV MH FTL street light fitting of all capacities on rail RCC wall tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires.Using 25mm dia G.I.Pipe | Each | 1263.15 | 1263.15 | 3.0 | False | None | None | False | None | False | 3789.45 | 0 |
| 3471536 | 123851 | None | 13.5 | Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over.existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. | Each | 170.1 | 170.1 | 10.0 | False | None | None | False | None | False | 1701.0 | 0 |
| 3471537 | 123851 | None | 11.3.3 | Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70% lumen maintenance with CRI 80. Power Input: 220-240V 50 60Hz Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' 36 40 W | Each | 1332.45 | 1332.45 | 10.0 | False | None | None | False | None | False | 13324.5 | 0 |
| 3471538 | 123851 | None | 13.7.2 | Fixing all types and all capacities of fluorescent /false ceiling spot light CFL LED fittings indoor on the wall/ ceiling / rafters girders using 23 0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.Using necessary length of G.I. chain | Each | 276.15 | 276.15 | 10.0 | False | None | None | False | None | False | 2761.5 | 0 |
| 3471539 | 123851 | None | 5.22 | Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter.on existing panel/wood board. | Each | 474.6 | 474.6 | 1.0 | False | None | None | False | None | False | 474.6 | 0 |