createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1720252456416 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1620.00 emd 64500.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 15-07-2024 16:00:00 tenderQueryClose 10-07-2024 11:00:00 technicalBidOpen 16-07-2024 16:00:01 publishedDate 06-07-2024 18:16:12 publishedByPost EWHFWD_EE_EEOFF_BNG publishedByUser KPE21346 - NAGARAJ MANGAL BORALINGAIAH bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Smt. Mary splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08182226695 mobileNumber 8618132226 tenderSupplierList None
tenderSchedule	createdTs 1720252456442 version 5 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT484 title Construction of Health wellness centre at Marikunte in Jagaluru Taluk, Davanagere District. description Construction of Health wellness centre at Marikunte in Jagaluru Taluk, Davanagere District. category WORKS categoryText Works ecv 6448733.43 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3522 locationName EWHFWD Executive Engineer Office Bengaluru provisionalAmount 6500000.0 groupOverheadTotal None fileNumber 11-MARIKUNTE
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1720252456000 0 None None Buildings Construction of Health wellness centre at Marikunte in Jagaluru Taluk, Davanagere District. Civil GF 3120263.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3466230 123634 None V3 Item No 2.5(ii)A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle A.In area of light jungle ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 463.74 463.74 1.0415 False None None False None False 482.98521 0 3466231 123634 None V1 Item No 1.13 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In Ordinary/Soft rock upto 300 mm depth ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 427.16 427.16 31.25 False None None False None False 13348.75 0 3466232 123634 None V1 Item No 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work, In ordinary/soft rock without blasting upto 1.5 m depth ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 428.34 428.34 62.88 False None None False None False 26934.0192 0 3466233 123634 None V1 Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 7067.02 7067.02 22.12 False None None False None False 156322.4824 0 3466234 123634 None V2 Item No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 139.24 139.24 104.15 False None None False None False 14501.846 0 3466235 123634 None V1 Item No 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M25 formwork charges included Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 8074.59 8074.59 13.76 False None None False None False 111106.3584 0 3466236 123634 None V1 Item No 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 7700.77 7700.77 16.75 False None None False None False 128987.8975 0 3466237 123634 None V1 Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 313.88 313.88 42.63 False None None False None False 13380.7044 0 3466238 123634 None V1 Item No 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 559.32 559.32 78.11 False None None False None False 43688.4852 0 3466239 123634 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Tonne 105559.26 105559.26 6.02 False None None False None False 635466.7452 0 3466240 123634 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 13727.05 13727.05 4.49 False None None False None False 61634.4545 0 3466241 123634 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 12919.58 12919.58 6.67 False None None False None False 86173.5986 0 3466242 123634 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 11708.37 11708.37 1.08 False None None False None False 12645.0396 0 3466243 123634 None V1 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 12112.11 12112.11 23.67 False None None False None False 286693.6437 0 3466244 123634 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 7556.72 7556.72 1.28 False None None False None False 9672.6016 0 3466245 123634 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 1545.8 1545.8 215.39 False None None False None False 332949.862 0 3466246 123634 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 1302.72 1302.72 29.31 False None None False None False 38182.7232 0 3466247 123634 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 116601.7 116601.7 0.47 False None None False None False 54802.799 0 3466248 123634 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 1198.88 1198.88 8.0 False None None False None False 9591.04 0 3466249 123634 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Kg 198.24 198.24 277.89 False None None False None False 55088.9136 0 3466250 123634 None V2 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 5284.04 5284.04 7.2 False None None False None False 38045.088 0 3466251 123634 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 5347.76 5347.76 15.12 False None None False None False 80858.1312 0 3466252 123634 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 413.0 413.0 16.0 False None None False None False 6608.0 0 3466253 123634 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 279.66 279.66 16.0 False None None False None False 4474.56 0 3466254 123634 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 1168.2 1168.2 8.0 False None None False None False 9345.6 0 3466255 123634 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 141.6 141.6 8.0 False None None False None False 1132.8 0 3466256 123634 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 70.8 70.8 32.0 False None None False None False 2265.6 0 3466257 123634 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 7946.12 7946.12 11.25 False None None False None False 89393.85 0 3466258 123634 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 6748.42 6748.42 1.08 False None None False None False 7288.2936 0 3466259 123634 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 248.98 248.98 97.14 False None None False None False 24185.9172 0 3466260 123634 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 431.88 431.88 369.84 False None None False None False 159726.4992 0 3466261 123634 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 411.82 411.82 303.52 False None None False None False 124995.6064 0 3466262 123634 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 118.0 118.0 466.98 False None None False None False 55103.64 0 3466263 123634 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 61.36 61.36 86.13 False None None False None False 5284.9368 0 3466264 123634 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 1460.84 1460.84 122.18 False None None False None False 178485.4312 0 3466265 123634 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 1049.02 1049.02 7.2 False None None False None False 7552.944 0 3466266 123634 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 416.54 416.54 129.38 False None None False None False 53891.9452 0 3466267 123634 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 944.0 944.0 36.0 False None None False None False 33984.0 0 3466268 123634 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 149.86 149.86 466.98 False None None False None False 69981.6228 0 3466269 123634 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 184.08 184.08 226.01 False None None False None False 41603.9208 0 3466270 123634 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 59.0 59.0 18.81 False None None False None False 1109.79 0 3466271 123634 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 110.92 110.92 18.81 False None None False None False 2086.4052 0 3466272 123634 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Kgs 666.7 666.7 27.05 False None None False None False 18034.235 0 3466273 123634 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 135.7 135.7 20.07 False None None False None False 2723.499 0 3466274 123634 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 120.36 120.36 24.0 False None None False None False 2888.64 0 3466275 123634 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 506.22 506.22 12.45 False None None False None False 6302.439 0 3466276 123634 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 62.54 62.54 20.07 False None None False None False 1255.1778 0 1720252456000 0 None None Buildings Construction of Health wellness centre at Marikunte in Jagaluru Taluk, Davanagere District. Civil GF 1852293.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3466277 123635 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Tonne 106614.9 106614.9 2.76 False None None False None False 294257.124 0 3466278 123635 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 13864.33 13864.33 3.08 False None None False None False 42702.1364 0 3466279 123635 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 13048.78 13048.78 7.61 False None None False None False 99301.2158 0 3466280 123635 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 11825.45 11825.45 0.7 False None None False None False 8277.815 0 3466281 123635 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 12233.24 12233.24 18.2 False None None False None False 222644.968 0 3466282 123635 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 7632.28 7632.28 1.91 False None None False None False 14577.6548 0 3466283 123635 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 1561.25 1561.25 188.57 False None None False None False 294404.9125 0 3466284 123635 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 1315.74 1315.74 35.97 False None None False None False 47327.1678 0 3466285 123635 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 117767.7 117767.7 0.38 False None None False None False 44751.726 0 3466286 123635 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 1210.85 1210.85 6.0 False None None False None False 7265.1 0 3466287 123635 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Kg 200.22 200.22 266.54 False None None False None False 53366.6388 0 3466288 123635 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 5401.23 5401.23 11.97 False None None False None False 64652.7231 0 3466289 123635 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 417.13 417.13 12.0 False None None False None False 5005.56 0 3466290 123635 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 282.45 282.45 12.0 False None None False None False 3389.4 0 3466291 123635 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 1179.88 1179.88 6.0 False None None False None False 7079.28 0 3466292 123635 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 143.01 143.01 4.0 False None None False None False 572.04 0 3466293 123635 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Nos 71.5 71.5 24.0 False None None False None False 1716.0 0 3466294 123635 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 8025.58 8025.58 9.0 False None None False None False 72230.22 0 3466295 123635 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 6748.42 6748.42 0.72 False None None False None False 4858.8624 0 3466296 123635 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 251.46 251.46 55.47 False None None False None False 13948.4862 0 3466297 123635 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 436.19 436.19 292.14 False None None False None False 127428.5466 0 3466298 123635 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 415.93 415.93 185.92 False None None False None False 77329.7056 0 3466299 123635 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 119.18 119.18 354.03 False None None False None False 42193.2954 0 3466300 123635 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 61.97 61.97 181.32 False None None False None False 11236.4004 0 3466301 123635 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 1475.44 1475.44 74.95 False None None False None False 110584.228 0 3466302 123635 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 1059.51 1059.51 5.95 False None None False None False 6304.0845 0 3466303 123635 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 420.7 420.7 68.28 False None None False None False 28725.396 0 3466304 123635 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 953.44 953.44 17.36 False None None False None False 16551.7184 0 3466305 123635 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 151.35 151.35 354.03 False None None False None False 53582.4405 0 3466306 123635 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 185.92 185.92 141.49 False None None False None False 26305.8208 0 3466307 123635 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 59.0 59.0 9.72 False None None False None False 573.48 0 3466308 123635 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 112.02 112.02 9.72 False None None False None False 1088.8344 0 3466309 123635 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Kgs 673.36 673.36 18.51 False None None False None False 12463.8936 0 3466310 123635 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 137.05 137.05 15.3 False None None False None False 2096.865 0 3466311 123635 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 120.36 120.36 18.0 False None None False None False 2166.48 0 3466312 123635 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 511.28 511.28 12.45 False None None False None False 6365.436 0 3466313 123635 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 63.16 63.16 15.3 False None None False None False 966.348 0 3466314 123635 None PWD SR 2023-24, Vol-2, Page No-149, Item No- 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 973.7 973.7 24.65 False None None False None False 24001.705 0 1720252456000 0 None None Buildings Construction of Health wellness centre at Marikunte in Jagaluru Taluk, Davanagere District. Civil TF 554197.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3466315 123636 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Columns ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 14001.59 14001.59 3.08 False None None False None False 43124.8972 0 3466316 123636 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel Beam and roof beam ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 13177.98 13177.98 1.16 False None None False None False 15286.4568 0 3466317 123636 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 11942.54 11942.54 0.12 False None None False None False 1433.1048 0 3466318 123636 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Slab and Staircase ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 12354.35 12354.35 6.89 False None None False None False 85121.4715 0 3466319 123636 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Tonne 107670.44 107670.44 1.28 False None None False None False 137818.1632 0 3466320 123636 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 7707.85 7707.85 1.07 False None None False None False 8247.3995 0 3466321 123636 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 1561.25 1561.25 7.73 False None None False None False 12068.4625 0 3466322 123636 None Item Code 8.10 Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface/ ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 253.95 253.95 17.29 False None None False None False 4390.7955 0 3466323 123636 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 440.51 440.51 61.39 False None None False None False 27042.9089 0 3466324 123636 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 516.34 516.34 12.45 False None None False None False 6428.433 0 3466325 123636 None Item Code 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 120.36 120.36 78.68 False None None False None False 9469.9248 0 3466326 123636 None Item Code 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 415.93 415.93 95.5 False None None False None False 39721.315 0 3466327 123636 None Item Code 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 62.58 62.58 30.45 False None None False None False 1905.561 0 3466328 123636 None Item Code 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 187.76 187.76 80.2 False None None False None False 15058.352 0 3466329 123636 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 63.79 63.79 1.89 False None None False None False 120.5631 0 3466330 123636 None Item Code 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 138.41 138.41 1.89 False None None False None False 261.5949 0 3466331 123636 None Item Code 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Kg 680.03 680.03 6.05 False None None False None False 4114.1815 0 3466332 123636 None Item Code 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 983.34 983.34 132.77 False None None False None False 130558.0518 0 3466333 123636 None Item Code 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 152.85 152.85 78.68 False None None False None False 12026.238 0 1720252456000 0 None None Buildings Construction of Health wellness centre at Marikunte in Jagaluru Taluk, Davanagere District. WS GF 195086.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3466334 123637 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 108.56 108.56 10.0 False None None False None False 1085.6 0 3466335 123637 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 164.02 164.02 5.0 False None None False None False 820.1 0 3466336 123637 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 145.14 145.14 30.0 False None None False None False 4354.2 0 3466337 123637 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 300.9 300.9 28.0 False None None False None False 8425.2 0 3466338 123637 None Item Code 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 232.46 232.46 20.0 False None None False None False 4649.2 0 3466339 123637 None Item Code 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 343.38 343.38 20.0 False None None False None False 6867.6 0 3466340 123637 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 371.7 371.7 6.0 False None None False None False 2230.2 0 3466341 123637 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 6645.76 6645.76 2.0 False None None False None False 13291.52 0 3466342 123637 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 1201.24 1201.24 1.0 False None None False None False 1201.24 0 3466343 123637 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 329.22 329.22 1.0 False None None False None False 329.22 0 3466344 123637 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 6563.16 6563.16 1.0 False None None False None False 6563.16 0 3466345 123637 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 585.28 585.28 1.0 False None None False None False 585.28 0 3466346 123637 None Item Code 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 13244.32 13244.32 1.0 False None None False None False 13244.32 0 3466347 123637 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 7052.86 7052.86 1.0 False None None False None False 7052.86 0 3466348 123637 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 2183.0 2183.0 1.0 False None None False None False 2183.0 0 3466349 123637 None Item Code20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 4185.46 4185.46 2.0 False None None False None False 8370.92 0 3466350 123637 None Item Code14.4.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 15422.6 15422.6 1.0 False None None False None False 15422.6 0 3466351 123637 None Item Code14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 5996.76 5996.76 1.0 False None None False None False 5996.76 0 3466352 123637 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 1146.96 1146.96 1.0 False None None False None False 1146.96 0 3466353 123637 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 1025.91 1025.91 2.0 False None None False None False 2051.82 0 3466354 123637 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 3636.76 3636.76 1.0 False None None False None False 3636.76 0 3466355 123637 None Rate approved Wellness center at Haronagalli in Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. (Market Rate) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 767.0 767.0 15.0 False None None False None False 11505.0 0 3466356 123637 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 364.62 364.62 10.0 False None None False None False 3646.2 0 3466357 123637 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 447.22 447.22 50.0 False None None False None False 22361.0 0 3466358 123637 None Item Code 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 256.06 256.06 20.0 False None None False None False 5121.2 0 3466359 123637 None Item Code 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 562.86 562.86 20.0 False None None False None False 11257.2 0 3466360 123637 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. a) 20mm dia (Market Rate) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 649.0 649.0 4.0 False None None False None False 2596.0 0 3466361 123637 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.b) 25mm dia (Market Rate) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 944.0 944.0 2.0 False None None False None False 1888.0 0 3466362 123637 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 188.8 188.8 2.0 False None None False None False 377.6 0 3466363 123637 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 1545.8 1545.8 2.25 False None None False None False 3478.05 0 3466364 123637 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 431.88 431.88 4.88 False None None False None False 2107.5744 0 3466365 123637 None Item Code 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work l 10.62 10.62 2000.0 False None None False None False 21240.0 0 1720252456000 0 None None Buildings Construction of Health wellness centre at Marikunte in Jagaluru Taluk, Davanagere District. water supply FF 91340.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3466366 123638 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 108.56 108.56 10.0 False None None False None False 1085.6 0 3466367 123638 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 165.66 165.66 10.0 False None None False None False 1656.6 0 3466368 123638 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 146.59 146.59 10.0 False None None False None False 1465.9 0 3466369 123638 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 303.91 303.91 15.0 False None None False None False 4558.65 0 3466370 123638 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 375.42 375.42 5.0 False None None False None False 1877.1 0 3466371 123638 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 6712.22 6712.22 2.0 False None None False None False 13424.44 0 3466372 123638 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 1213.25 1213.25 2.0 False None None False None False 2426.5 0 3466373 123638 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 332.51 332.51 2.0 False None None False None False 665.02 0 3466374 123638 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 6628.79 6628.79 2.0 False None None False None False 13257.58 0 3466375 123638 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 591.13 591.13 1.0 False None None False None False 591.13 0 3466376 123638 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 7123.39 7123.39 1.0 False None None False None False 7123.39 0 3466377 123638 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 2204.83 2204.83 2.0 False None None False None False 4409.66 0 3466378 123638 None Item Code 14.40.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 5758.78 5758.78 1.0 False None None False None False 5758.78 0 3466379 123638 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 1158.43 1158.43 1.0 False None None False None False 1158.43 0 3466380 123638 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 1035.17 1035.17 2.0 False None None False None False 2070.34 0 3466381 123638 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 3673.13 3673.13 1.0 False None None False None False 3673.13 0 3466382 123638 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 368.27 368.27 10.0 False None None False None False 3682.7 0 3466383 123638 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 451.69 451.69 30.0 False None None False None False 13550.7 0 3466384 123638 None Item Code 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 568.49 568.49 15.0 False None None False None False 8527.35 0 3466385 123638 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 188.8 188.8 2.0 False None None False None False 377.6 0 1720252457000 0 None None Buildings Construction of Health wellness centre at Marikunte in Jagaluru Taluk, Davanagere District. Electrical 434109.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3466386 123639 None Item Code 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Short point up to 3M from tapping point to out let via switch ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Point 317.41 317.41 30.0 False None None False None False 9522.3 0 3466387 123639 None Item Code 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Medium point above 3M up to 6M from tapping point to out let via switch ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Point 447.21 447.21 22.0 False None None False None False 9838.62 0 3466388 123639 None Item Code 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Long point above 6M up to 10M from tapping point to out let via switch ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Point 654.9 654.9 16.0 False None None False None False 10478.4 0 3466389 123639 None Item Code 3.4.1 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall1 to 2 Way ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 162.84 162.84 21.0 False None None False None False 3419.64 0 3466390 123639 None Item Code 3.4.2 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 4 to 5Way ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 208.85 208.85 6.0 False None None False None False 1253.1 0 3466391 123639 None Item Code 3.4.3 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 6Way ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 259.59 259.59 2.0 False None None False None False 519.18 0 3466392 123639 None Item Code 3.4.4 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 8 Way ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 307.97 307.97 13.0 False None None False None False 4003.61 0 3466393 123639 None Item Code 3.4.5 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 1012Way ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 376.41 376.41 4.0 False None None False None False 1505.64 0 3466394 123639 None Item Code 3.5.1 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1 to 2 Module ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 161.66 161.66 21.0 False None None False None False 3394.86 0 3466395 123639 None Item Code 3.5.2 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 4 Module ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3466396 123639 None Item Code 3.5.3 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 6 Module ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 276.12 276.12 2.0 False None None False None False 552.24 0 3466397 123639 None Item Code 3.5.4 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 8 Module ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3466398 123639 None Item Code 3.5.5 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1012 Module ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3466399 123639 None Item Code 3.6.1 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3466400 123639 None Item Code 3.6.2 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way Switch ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3466401 123639 None Item Code 3.6.3 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 201.78 201.78 35.0 False None None False None False 7062.3 0 3466402 123639 None Item Code 3.6.4 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3466403 123639 None Item Code 3.6.8 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 208.86 208.86 2.0 False None None False None False 417.72 0 3466404 123639 None Item Code 3.6.9 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32AmpsDP switch ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 384.66 384.66 11.0 False None None False None False 4231.26 0 3466405 123639 None Item Code 3.6.10 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3466406 123639 None Item Code 3.6.11 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TVTelephone socket ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 184.08 184.08 3.0 False None None False None False 552.24 0 3466407 123639 None Item Code 12.2.1 Supplying and fixing one of 230 volts Dinf dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with remote. Ding Dong bell ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 290.28 290.28 2.0 False None None False None False 580.56 0 3466408 123639 None Item Code 12.2.1 Supplying and fixing Metal Fan Box with round hook ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 138.06 138.06 12.0 False None None False None False 1656.72 0 3466409 123639 None Item Code 1.2.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, meta lPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire whereng the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (22) 1920mm dia 2mm thick ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 77.88 77.88 350.0 False None None False None False 27258.0 0 3466410 123639 None Item Code 1.2.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(22) 25mm dia 2mm thick ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 92.04 92.04 320.0 False None None False None False 29452.8 0 3466411 123639 None Item Code 1.3.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.1920mm dia 2mm thick ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 80.24 80.24 120.0 False None None False None False 9628.8 0 3466412 123639 None Item Code 1.3.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 93.22 93.22 100.0 False None None False None False 9322.0 0 3466413 123639 None Item Code 2.3.1 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694 confirming to latest amendments 1.0sqmm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 22.42 22.42 125.0 False None None False None False 2802.5 0 3466414 123639 None Item Code 2.3.3 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 2.5 sqmm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 49.55 49.55 450.0 False None None False None False 22297.5 0 3466415 123639 None Item Code 2.3.4 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 4 sqmm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 74.33 74.33 400.0 False None None False None False 29732.0 0 3466416 123639 None Item Code 5.18.9 Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc with provision for fix ing suitable type capacity MCB s single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II Single Door 12 Way SP and N ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3466417 123639 None Item Code 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 to 32Amps SP ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3466418 123639 None Item Code 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 16 to 25 Amps 2 pole ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3466419 123639 None Item Code 2.5.23 Supplying, drawing flexible multicore cable manufactured with electrlytic grade flexible copper with low condutor confirming to IS 8130-1984 and (Virgin) PVC Insulation sheated suitable for working voltage upto 1100 v as per IS 694 2010 ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 387.04 387.04 30.0 False None None False None False 11611.2 0 3466420 123639 None Item Code 12.56 Supplying, fixing wiring earth electrode for grounding conduits I.C cut out and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3466421 123639 None Item Code 11.3.2 Supplying, fix ing wiring earth electrode for grounding conduits I.C cut out and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc the pipe shall have 16 through holes of 12 mm dia ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 814.19 814.19 26.0 False None None False None False 21168.94 0 3466422 123639 None Item Code 11.4.2 Supplying of recess mounting non integrated type LED down light 12 to 10 W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power or COB with CCT 6500 degree K CRI greater then 70percent . efficacy greater then100 lumen per W 120 degree beam spread lifegreater then 25000 burning hours and Compliance to IS10322 or IEC 60598 LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED s are driven by HF electronic driver integrated in a separate control gear assembly with PF greater then 0.95 power loss should less then 5 percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit, THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 1497.42 1497.42 2.0 False None None False None False 2994.84 0 3466423 123639 None Item Code 11.11.3 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 175.82 175.82 5.0 False None None False None False 879.1 0 3466424 123639 None Item Code 11.11.7 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 502.68 502.68 12.0 False None None False None False 6032.16 0 3466425 123639 None Item Code 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 61.36 61.36 2.0 False None None False None False 122.72 0 3466426 123639 None Item Code 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance ABLCPRI and any Government certified agency and Design and Development facility certified by ISO 90012008 . Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeNichia LumiledsOsram make LED Source. LED Streetlight 40W ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3466427 123639 None Item Code 6.1 Supplying e x haust fan of 1440 RPM of 300mm (12 PERCENT) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3466428 123639 None Item Code 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball bearing system. 48 PERCENT Sweep (1200mm) Regular model ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3466429 123639 None Item Code 13.7.1 fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fix ing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3466430 123639 None Item Code 13.13 fix ing one e x haust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3466431 123639 None Item Code 13.4.1 Supplying and fix ing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts and nuts, as required, suitable for 9 to 12ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5m. Length ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3466432 123639 None Item Code 13.5 fix ing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 191.16 191.16 2.0 False None None False None False 382.32 0 3466433 123639 None Item Code 5.42.1 Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red o x ide primer paint and finally finished with approved colour etc complete 16SWG ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Sqm 0.59 0.59 30000.0 False None None False None False 17700.0 0 3466434 123639 None Item Code 5.40.1 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC insulator which are mounted on powder coated 40 x 6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete. 100Amps 4 x 30 x 6mm Aluminum Strips ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3466435 123639 None Item Code 5.41.1 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red o x ide and then two coats of approved paint 40 x 40 x 6mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 359.9 359.9 1.0 False None None False None False 359.9 0 3466436 123639 None Item Code 5.41.4 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 x 100 x 50 x 6mm C channel ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 892.07 892.07 2.0 False None None False None False 1784.14 0 3466437 123639 None Item Code 5.15.9 Supplying and fixing mouldedd case circuit breajers (MCCB) over the exisiting wood or panel board using necessary screw boilts nuts and wiring complete. Protection of overload and short circuit thermal Magnetic or Micro processor release and earth fault as per IS 13947 icu ir equal to ics ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work m 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3466438 123639 None Item Code 5.18.4 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 ot 32Amps DP ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3466439 123639 None Item Code 5.18.9 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 to 63Amps TPN ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3466440 123639 None Item Code 5.7.2 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 284.38 284.38 3.0 False None None False None False 853.14 0 3466441 123639 None Item Code 5.7.3 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63A ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 473.18 473.18 1.0 False None None False None False 473.18 0 3466442 123639 None Item Code 5.12.1 Supplying of on load change over switches 4 poles, AC of 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) upto 63 A ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3466443 123639 None Item Code 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 236.0 236.0 1.0 False None None False None False 236.0 0 3466444 123639 None Item Code 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 188.8 188.8 1.0 False None None False None False 188.8 0 3466445 123639 None Item Code 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3466446 123639 None Item Code 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC. 50 Hz 1224V D.C. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3466447 123639 None Item Code 5.34 Supplying, fixing and wiring 505 to 4005A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3466448 123639 None Item Code 5.30 Supplying, fixing and wiring Electronic Trivector Meter ETV5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1720252457000 0 None None Buildings Construction of Health wellness centre at Marikunte in Jagaluru Taluk, Davanagere District. Dismantiling 201441.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3466449 123640 None PWD SR-2023-24Volume-2, Page No-163, Item no-19.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(PWD SR-2023-24Volume-2, Page No-163, Item no-19.3) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 2862.68 2862.68 26.56 False None None False None False 76032.7808 0 3466450 123640 None PWD SR-2023-24, Volume-2, Page No-163, Item no-19. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 568.76 568.76 144.29 False None None False None False 82066.3804 0 3466451 123640 None PWD SR-2023-24 Volume-2, Page No-192, Item no-19.5 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) (PWD SR-2023-24 Volume-2, Page No-192, Item no-19.54.1 ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 892.08 892.08 14.15 False None None False None False 12622.932 0 3466452 123640 None PWD SR-2023-24, Volume-2, Page No-188, Item no-19. Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engineerin-charge. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 283.2 283.2 4.41 False None None False None False 1248.912 0 3466453 123640 None PWD SR-2023-24 Volume-3, Page No-3, Item no-1.1A Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum. Tipper 5.5 cum ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work Cum 159.3 159.3 185.0 False None None False None False 29470.5 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1720252462000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1720252462000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1720252462000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1720252462000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1720252462000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1720252475000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka Public Procurement Portal (KPPP) due to internet connectivity issues and technical glitches at bidders end. None 1720252481000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. None 1720252487000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1720252492000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1720252499000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1720252504000 0 None None ELIGIBILITY Materials like, steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested positive by the quality control authority before use on the work. None 1720252510000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1720252515000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1720252520000 0 None None ELIGIBILITY All the formats prescribed in the bid documents shall be filled in complete manner. (section 2 and 3 of the bid document) and shall be uploaded properly, signed by renderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose. None 1720252527000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid. None 1720252532000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1720252538000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within a week time from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as non responsive. None 1720252544000 0 None None ELIGIBILITY The contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1720252549000 0 None None ELIGIBILITY Tenderer should have latest GST Registration and latest clearance certificate in their name. None 1720252555000 0 None None ELIGIBILITY Special Instructions to tenderers - asper bid document None 1720252561000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contact Help Desk for more assistance Phone: 91-8046010000/91-8068948777) None 1720252566000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 None 1720252572000 1 None None ELIGIBILITY The Bidder belonging to the Scheduled Caste shall be Domicile of the State of Karnataka for more than 10 years. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None The Mandating satisfactorily completion of one any similar building work of value not less than Rs. 16.13 Lakhs as a prime contractor Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None At least one similar work executed in any one year, the following minimum quantities of work: 1) RCC & PCC 87.70 Cum, 2) Ceramic Tiles / Vitrified Tiles / Granite Flooring 326.35 Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works issued by KPWD/Government electrical Inspectorate and should have executed similar electrical works totaling Rs. 2.17 Lakhs in any one year in the last Five year. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The Tenderer or his identified sub contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/KUWS&DB and should have executed similar water supply/sanitary engineering works totaling Rs. 1.43 Lakhs in any one year in the last Five year. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None KPWD Class-III & Above Civil Contractor Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None GST Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None The tenderer should have been Achieved in at least One financial years a minimum financial turnover (in all classes of civil engineering construction works only) of value Rs. 64.49 lakhs. In the last five year i.e., 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and/or availability of credit facilities of no less than Rs. 19.35 Lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.,) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText KPWD Registration Certificate issued by competent authority. True Technical Bid Reserved Schedule Caste Certificate issued by competent authority. True Technical Bid Annual Turnover Certificate issued by Chartered Accountant along with balance sheet True Technical Bid Workdone Certificate issued by the officer not below the rank of Executive Engineer True Technical Bid The tenderer or his sub contractor should posses valid Electrical Registration Certificate issued by KPWD/Government Electrical Inspectorate True Technical Bid The tenderer or his sub contractor should posses valid Water supply Registration Certificate issued by BWSSB/KUWS&DB True Technical Bid Domicile Certificate issued by competent authority True Technical Bid GST Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None