| 1720265761000 | 0 | None | None | Other Works | Construction of 3 TPD MRF Centre (Material Recovery Facility) of PEB Structure (PRIMARY & Secondary Shed) at SWM Site Belagali. | 3382384.43 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3471120 | 123824 | None | code01 | KSRB 1-1.14.1: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. (Item No. 1.14.1 Page No. 8 Vol.1 PWD SR) | Cum | 105.06 | 105.06 | 36.64 | False | None | None | False | None | False | 3849.3984 | 0 | | 3471121 | 123824 | None | code02 | KSRB 2-2.1.2: Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork shall be paid separately. Specification No. KBS 2.1, (Item No. 2.1.2 Page No. 15 Vol.1 PWD SR) | Cum | 5833.92 | 5833.92 | 39.71 | False | None | None | False | None | False | 231664.9632 | 0 | | 3471122 | 123824 | None | code03 | KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Specification No. KBS 2.3., 2.3 (Item No. 2.3.2 Page No. 16 Vol.1 PWD SR & Appendix I page No.115) | Cum | 7192.8 | 7192.8 | 9.04 | False | None | None | False | None | False | 65022.912 | 0 | | 3471123 | 123824 | None | code04 | 8 Percent (centering Charges) | Cum | 11016.0 | 11016.0 | 2.26 | False | None | None | False | None | False | 24896.16 | 0 | | 3471124 | 123824 | None | code05 | 70 Percent (centering Charges) | Cum | 7192.8 | 7192.8 | 40.7 | False | None | None | False | None | False | 292746.96 | 0 | | 3471125 | 123824 | None | code06 | KSRB 2-2.2.3.1 :Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Item No. 2.2.3 Page No. 15 Vol.1 PWD SR & Appendix I page No.115) | Cum | 9694.08 | 9694.08 | 5.98 | False | None | None | False | None | False | 57970.5984 | 0 | | 3471126 | 123824 | None | code07 | KSRB 2.11 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and
technical specification. (Item No. 2.11 Page No. 18 Vol.1 PWD SR) | Kg | 92140.71 | 92140.71 | 4.98 | False | None | None | False | None | False | 458860.7358 | 0 | | 3471127 | 123824 | None | code08 | KSRB 5-5.4: Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR) | Cum | 6580.67 | 6580.67 | 17.43 | False | None | None | False | None | False | 114701.0781 | 0 | | 3471128 | 123824 | None | code09 | KSRB 1-1.8: Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work (Item No. 1.8 Page No. 7 Vol.1 PWD SR) | Cum | 474.0 | 474.0 | 183.14 | False | None | None | False | None | False | 86808.36 | 0 | | 3471129 | 123824 | None | code10 | KSRB 6-6.33: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (Item No. 6.33 Page No. 17 Vol.2 PWD SR) | Sqm | 1267.93 | 1267.93 | 106.06 | False | None | None | False | None | False | 134476.6558 | 0 | | 3471130 | 123824 | None | code11 | KSRB 8-8.3.1: Providing 15mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Item No. 8.2.1, Page No. 41, Vol.2) | Sqm | 303.85 | 303.85 | 225.61 | False | None | None | False | None | False | 68551.5985 | 0 | | 3471131 | 123824 | None | code12 | Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer inCharge. (Item No. 11.2, Page No. 77, Vol.2) | Kg | 116.39 | 116.39 | 8380.0 | False | None | None | False | None | False | 975348.2 | 0 | | 3471132 | 123824 | None | code13 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Item No. 7.38, Page No. 26, Vol.2) | Sqm | 585.04 | 585.04 | 590.76 | False | None | None | False | None | False | 345618.2304 | 0 | | 3471133 | 123824 | None | code14 | KSRB 8-8.51 : Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(Item No. 8.51, Page No. 50, Vol.2) | Sqm | 103.0 | 103.0 | 225.61 | False | None | None | False | None | False | 23237.83 | 0 | | 3471134 | 123824 | None | code15 | KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge.(Item No. 8.54.1, Page No. 50, Vol.2) | No | 75.19 | 75.19 | 106.06 | False | None | None | False | None | False | 7974.6514 | 0 | | 3471135 | 123824 | None | code16 | KSRB 8-8.75.2 : Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (one coats applied @ 0.83 l/10 m²) including preparing the surface after thoroughly cleaning the surface to remove all dirt,dust and foreign matter , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Item No. 8.75.2, Page No. 53, Vol.2) | No | 75.19 | 75.19 | 106.06 | False | None | None | False | None | False | 7974.6514 | 0 | | 3471136 | 123824 | None | code17 | KSRB 11-11.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Item No. 11.6.1, Page No. 76, Vol.2) | Sqm | 2711.99 | 2711.99 | 22.5 | False | None | None | False | None | False | 61019.775 | 0 | | 3471137 | 123824 | None | code18 | KSRB 11-11.8.4:Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Item No. 11.8.4, Page No. 77, Vol.2) | No | 25425.58 | 25425.58 | 2.0 | False | None | None | False | None | False | 50851.16 | 0 | | 3471138 | 123824 | None | code19 | KSRB 11-11.35.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications..(Item No. 11.35.1.1, Page No. 87, | Kg | 465.56 | 465.56 | 240.0 | False | None | None | False | None | False | 111734.4 | 0 | | 3471139 | 123824 | None | code20 | LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system.Completely made by CRCA fabricated, powder coated paint finished front openable compartment for all feeders requirement with IP-54. Main Panel Incomer : MCCB TPN 63A with CBCT ELR & Ph indicators, meter section with all parameters as required Market price 100A 4 Wire 25kA 415V Aluminium busbars compartment. Outgoings: 63A MCCB feeder- 01No. Outgoings: 16A MPCB feeder - 01Nos Outgoings: 16A MPCB feeder - 03Nos Outgoings: 63/40A MCB feeder- 08Nos | No | 75000.0 | 75000.0 | 1.0 | False | None | None | False | None | False | 75000.0 | 0 | | 3471140 | 123824 | None | code21 | Sub panel-1 Incomer : MCB TPN 63A with CBCT ELR & Ph indicators, section with all parameters as required Market price 63A 4 Wire 16kA 415V Aluminium busbars compartment. Outgoings: 40/63A 4P MCB feeder- 10No. Outgoings: 32A Industrial socket-02Nos. Outgoings: 16A Industrial socket-02Nos. | No | 35000.0 | 35000.0 | 1.0 | False | None | None | False | None | False | 35000.0 | 0 | | 3471141 | 123824 | None | code22 | LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included. 3.5Cx50 Sqmm Al Ar cable | Mtr | 300.0 | 300.0 | 30.0 | False | None | None | False | None | False | 9000.0 | 0 | | 3471142 | 123824 | None | code23 | 4Cx25 Sqmm Al Ar cable | Mtr | 180.0 | 180.0 | 20.0 | False | None | None | False | None | False | 3600.0 | 0 | | 3471143 | 123824 | None | code24 | 4Cx16 Sqmm Al Ar cable | Mtr | 120.0 | 120.0 | 20.0 | False | None | None | False | None | False | 2400.0 | 0 | | 3471144 | 123824 | None | code25 | 4Cx10 Sqmm Cu Ar cable | Mtr | 332.0 | 332.0 | 1.0 | False | None | None | False | None | False | 332.0 | 0 | | 3471145 | 123824 | None | code26 | 4Cx6.0 Sqmm Cu Ar cable | Mtr | 256.0 | 256.0 | 1.0 | False | None | None | False | None | False | 256.0 | 0 | | 3471146 | 123824 | None | code27 | 3Cx6.0 Sqmm Cu Un Ar cable | Mtr | 316.0 | 316.0 | 1.0 | False | None | None | False | None | False | 316.0 | 0 | | 3471147 | 123824 | None | code28 | 3Cx4.0 Sqmm Cu Un Ar cable | Mtr | 300.0 | 300.0 | 1.0 | False | None | None | False | None | False | 300.0 | 0 | | 3471148 | 123824 | None | code29 | Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class. 3.5Cx50 Sqmm Al Ar cable | Set | 200.0 | 200.0 | 2.0 | False | None | None | False | None | False | 400.0 | 0 | | 3471149 | 123824 | None | code30 | 4Cx25 Sqmm Al Ar cable | Set | 67.2 | 67.2 | 2.0 | False | None | None | False | None | False | 134.4 | 0 | | 3471150 | 123824 | None | code31 | 4Cx16 Sqmm Al Ar cable | Set | 67.2 | 67.2 | 2.0 | False | None | None | False | None | False | 134.4 | 0 | | 3471151 | 123824 | None | code32 | 4Cx10 Sqmm Cu Ar cable | Set | 54.4 | 54.4 | 2.0 | False | None | None | False | None | False | 108.8 | 0 | | 3471152 | 123824 | None | code33 | 4Cx6.0 Sqmm Cu Ar cable | Set | 54.4 | 54.4 | 2.0 | False | None | None | False | None | False | 108.8 | 0 | | 3471153 | 123824 | None | code34 | 3Cx6.0 Sqmm Cu Un Ar cable | Set | 54.4 | 54.4 | 2.0 | False | None | None | False | None | False | 108.8 | 0 | | 3471154 | 123824 | None | code35 | 3Cx4.0 Sqmm Cu Un Ar cable | Set | 54.4 | 54.4 | 2.0 | False | None | None | False | None | False | 108.8 | 0 | | 3471155 | 123824 | None | code36 | Supply & installation of Tinned Copper lugs crimping & wiring to terminal point. 70 Sqmm Al Ar cable (tinned copper lug) | Set | 250.0 | 250.0 | 2.0 | False | None | None | False | None | False | 500.0 | 0 | | 3471156 | 123824 | None | code37 | 25 Sqmm Al Ar cable (tinned copper lug) | Set | 16.0 | 16.0 | 2.0 | False | None | None | False | None | False | 32.0 | 0 | | 3471157 | 123824 | None | code38 | 16 Sqmm Al Ar cable (tinned copper lug) | Set | 9.95 | 9.95 | 2.0 | False | None | None | False | None | False | 19.9 | 0 | | 3471158 | 123824 | None | code39 | 10 Sqmm Cu Ar cable (tinned copper lug) | Set | 6.4 | 6.4 | 1.0 | False | None | None | False | None | False | 6.4 | 0 | | 3471159 | 123824 | None | code40 | 6.0 Sqmm Cu Ar cable (tinned copper lug) | Set | 5.6 | 5.6 | 1.0 | False | None | None | False | None | False | 5.6 | 0 | | 3471160 | 123824 | None | code41 | 6.0 Sqmm Cu Un Ar cable (tinned copper lug) | Set | 5.6 | 5.6 | 1.0 | False | None | None | False | None | False | 5.6 | 0 | | 3471161 | 123824 | None | code42 | 4.0 Sqmm Cu Un Ar cable (tinned copper lug) | Set | 5.6 | 5.6 | 1.0 | False | None | None | False | None | False | 5.6 | 0 | | 3471162 | 123824 | None | code43 | PVC conduits & Accessories Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall/RCC slab or exposed on fixing invrted wood plugs in case of RCC ceiling and RCC wall/stone structure or rawl plugs in case of brick wall & cement plastering the damaged portion using heavy gauage saddles at interval of 700mm using NF screws. 19/20mm dia PVC 2mm thick conduit CSR Electrical SR-2022-23, ITEM NO:1.1.1 ,CH-1, PAGE NO-1 | Mtr | 68.0 | 68.0 | 10.0 | False | None | None | False | None | False | 680.0 | 0 | | 3471163 | 123824 | None | code44 | 25mm dia PVC 2mm thick conduit CSR Electrical SR-2022-23, ITEM NO:1.1.2 ,CH-1, PAGE NO-1 | Mtr | 80.0 | 80.0 | 10.0 | False | None | None | False | None | False | 800.0 | 0 | | 3471164 | 123824 | None | code45 | Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for point wiring laid in existing conduit. 1 Light point upto 3Mtr from switch board CSR Electrical SR-2022-23, ITEM NO:2.1.1 ,CH-1, PAGE NO-2 | Nos | 276.0 | 276.0 | 1.0 | False | None | None | False | None | False | 276.0 | 0 | | 3471165 | 123824 | None | code46 | 1 Light point above 3M upto 6Mtr from switch board CSR Electrical SR-2022-23, ITEM NO:2.1.2 ,CH-1, PAGE NO-3 | Nos | 386.0 | 386.0 | 1.0 | False | None | None | False | None | False | 386.0 | 0 | | 3471166 | 123824 | None | code47 | 1 Light point above 6M upto 10Mtr from switch board CSR Electrical SR-2022-23, ITEM NO:2.1.3 ,CH-1, PAGE NO-3 | Nos | 567.0 | 567.0 | 1.0 | False | None | None | False | None | False | 567.0 | 0 | | 3471167 | 123824 | None | code48 | 2 Light point above 3Mtr upto 6Mtr from switch board CSR Electrical SR-2022-23, ITEM NO:2.1.4 ,CH-1, PAGE NO-3 | Nos | 721.0 | 721.0 | 1.0 | False | None | None | False | None | False | 721.0 | 0 | | 3471168 | 123824 | None | code49 | 2 Light point above 6Mtr upto 10Mtr from switch board CSR Electrical SR-2022-23, ITEM NO:2.1.4 ,CH-1, PAGE NO-3 | Nos | 721.0 | 721.0 | 1.0 | False | None | None | False | None | False | 721.0 | 0 | | 3471169 | 123824 | None | code50 | 3 Light point above 6Mtr upto 10Mtr from switch board CSR Electrical SR-2022-23, ITEM NO:2.1.5 ,CH-1, PAGE NO-3 | No | 1054.0 | 1054.0 | 3.0 | False | None | None | False | None | False | 3162.0 | 0 | | 3471170 | 123824 | None | code51 | Circuit main wiring Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit. 1.0 Sqmm Cu FRLS wire CSR Electrical SR-2022-23, ITEM NO:2.3.1 ,CH-1, PAGE NO-3 | Mtr | 18.0 | 18.0 | 300.0 | False | None | None | False | None | False | 5400.0 | 0 | | 3471171 | 123824 | None | code52 | 1.5 Sqmm Cu FRLS wire CSR Electrical SR-2022-23, ITEM NO:2.3.2 ,CH-1, PAGE NO-3 | Mtr | 26.0 | 26.0 | 300.0 | False | None | None | False | None | False | 7800.0 | 0 | | 3471172 | 123824 | None | code53 | 2.5 Sqmm Cu FRLS wire CSR Electrical SR-2022-23, ITEM NO:2.3.3 ,CH-1, PAGE NO-3 | Mtr | 40.0 | 40.0 | 300.0 | False | None | None | False | None | False | 12000.0 | 0 | | 3471173 | 123824 | None | code54 | 4.0 Sqmm Cu FRLS wire CSR Electrical SR-2022-23, ITEM NO:2.3.4 ,CH-1, PAGE NO-3 | Mtr | 59.0 | 59.0 | 50.0 | False | None | None | False | None | False | 2950.0 | 0 | | 3471174 | 123824 | None | code55 | 6.0 Sqmm Cu FRLS wire CSR Electrical SR-2022-23, ITEM NO:2.3.4 ,CH-1, PAGE NO-3 | Mtr | 115.0 | 115.0 | 50.0 | False | None | None | False | None | False | 5750.0 | 0 | | 3471175 | 123824 | None | code56 | Switches & sockets outlets in Existing modular box 6A one way switch CSR Electrical SR-2022-23, ITEM NO:3.6.1 ,CH-3, PAGE NO-5 | Nos | 88.0 | 88.0 | 4.0 | False | None | None | False | None | False | 352.0 | 0 | | 3471176 | 123824 | None | code57 | 6A 5Pin socket CSR Electrical SR-2022-23, ITEM NO:3.6.3 ,CH-3, PAGE NO-5 | Nos | 162.0 | 162.0 | 2.0 | False | None | None | False | None | False | 324.0 | 0 | | 3471177 | 123824 | None | code58 | Stepped fan regulator CSR Electrical SR-2022-23, ITEM NO:3.6.4 ,CH-3, PAGE NO-5 | Nos | 313.0 | 313.0 | 2.0 | False | None | None | False | None | False | 626.0 | 0 | | 3471178 | 123824 | None | code59 | 6/16A Universal socket CSR Electrical SR-2022-23, ITEM NO:3.6.11 ,CH-3, PAGE NO-5 | Nos | 249.0 | 249.0 | 2.0 | False | None | None | False | None | False | 498.0 | 0 | | 3471179 | 123824 | None | code60 | Light fixture Supply & fixing of 50W LED light fixture IP 65, included screws accessoris Etc..Considered outdoor type light fitting for equivalent. CSR Electrical SR-2022-23, ITEM NO:11.9.1, PAGE NO-37 | Nos | 7390.0 | 7390.0 | 10.0 | False | None | None | False | None | False | 73900.0 | 0 | | 3471180 | 123824 | None | code61 | Earthing 25x6mm GI Earth Strip | Mtr | 92.0 | 92.0 | 60.0 | False | None | None | False | None | False | 5520.0 | 0 | | 3471181 | 123824 | None | code62 | 8.0 SWG GI bare wire | Mtr | 15.2 | 15.2 | 50.0 | False | None | None | False | None | False | 760.0 | 0 | | 3471182 | 123824 | None | code63 | Supply & installation of Cable Trays fixed with MS angles, hitech & anchor fastner supports at interval 0.9M interval shall be included complete run below ceiling/wall. Supply & installation of GI Ladder type cable tray 300x50mm | Mtr | 400.0 | 400.0 | 20.0 | False | None | None | False | None | False | 8000.0 | 0 |
|