createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1720439176304 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 14000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 16-07-2024 16:00:00 tenderQueryClose 12-07-2024 16:00:00 technicalBidOpen None publishedDate 08-07-2024 17:22:43 publishedByPost RDPR_EE_DIV_MYS publishedByUser KPE12940 - S VEERESH bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson jacob splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 8123267587 tenderSupplierList None
tenderSchedule	createdTs 1720439176349 version 4 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT6913 title Construction of one toilet for boys and one toilet for girls at GHPS Doddmargowdnhalli in mysore taluk (GEN) description Construction of one toilet for boys and one toilet for girls at GHPS Doddmargowdnhalli in mysore taluk (GEN) category WORKS categoryText Works ecv 545809.85 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 960 locationName RDPR Division Office Mysuru provisionalAmount 546000.0 groupOverheadTotal None fileNumber AEE/MYS/24-25/04
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1720439176000 0 None None Buildings Construction of one toilet for boys and one toilet for girls at GHPS Doddmargowdnhalli in mysore taluk (GEN) 545809.85 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3483732 124509 None code01 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 112.1 112.1 3.36 False None None False None False 376.656 0 3483733 124509 None code02 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out,m shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work Cum 285.56 285.56 16.99 False None None False None False 4851.6644 0 3483734 124509 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8 (M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 7067.01 7067.01 3.03 False None None False None False 21413.0403 0 3483735 124509 None code04 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7539.01 7539.01 2.44 False None None False None False 18395.1844 0 3483736 124509 None code05 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 Cum 7809.24 7809.24 3.74 False None None False None False 29206.5576 0 3483737 124509 None code06 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 313.88 313.88 2.04 False None None False None False 640.3152 0 3483738 124509 None code07 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin- ing, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Cum 300.9 300.9 6.32 False None None False None False 1901.688 0 3483739 124509 None code08 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separatelyM20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11191.71 11191.71 1.81 False None None False None False 20256.9951 0 3483740 124509 None code09 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications Sqm 1545.8 1545.8 50.49 False None None False None False 78047.442 0 3483741 124509 None code10 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications Sqm 1302.72 1302.72 6.48 False None None False None False 8441.6256 0 3483742 124509 None code11 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 173.45 173.45 200.63 False None None False None False 34799.2735 0 3483743 124509 None code12 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge Sqm 5284.04 5284.04 3.15 False None None False None False 16644.726 0 3483744 124509 None code13 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge MT 375.23 375.23 11.4 False None None False None False 4277.622 0 3483745 124509 None code14 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges..-do- with both side prelam MT 2791.87 2791.87 3.15 False None None False None False 8794.3905 0 3483746 124509 None code15 Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m Sqm 1037.22 1037.22 17.76 False None None False None False 18421.0272 0 3483747 124509 None code16 Providing & fixing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings 1.60 mm thick with zinc coating not less than 350 g/m² MT 2434.33 2434.33 6.5 False None None False None False 15823.145 0 3483748 124509 None code17 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc Kg 215.94 215.94 19.2 False None None False None False 4146.048 0 3483749 124509 None code18 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 329.21 329.21 77.71 False None None False None False 25582.9091 0 3483750 124509 None code19 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. Sqm 392.94 392.94 40.9 False None None False None False 16071.246 0 3483751 124509 None code20 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc Sqm 1049.02 1049.02 9.11 False None None False None False 9556.5722 0 3483752 124509 None code21 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications Sqm 1642.56 1642.56 33.72 False None None False None False 55387.1232 0 3483753 124509 None code22 Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). .Ordinary cement without any pigment Cum 1239.0 1239.0 4.05 False None None False None False 5017.95 0 3483754 124509 None code23 Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 127.44 127.44 43.99 False None None False None False 5606.0856 0 3483755 124509 None code24 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 105.02 105.02 43.99 False None None False None False 4619.8298 0 3483756 124509 None code25 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 205.32 205.32 40.9 False None None False None False 8397.588 0 3483757 124509 None code26 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 164.01 164.01 27.72 False None None False None False 4546.3572 0 3483758 124509 None code27 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications...Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cum 7366.74 7366.74 0.56 False None None False None False 4125.3744 0 3483759 124509 None code28 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS MT 105.02 105.02 30.0 False None None False None False 3150.6 0 3483760 124509 None code29 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover Each 6435.71 6435.71 2.0 False None None False None False 12871.42 0 3483761 124509 None code30 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Ltr 10.62 10.62 1000.0 False None None False None False 10620.0 0 3483762 124509 None code31 Providing and fixing C.P. brass bib cock of approved quality conforming No 749.3 749.3 6.0 False None None False None False 4495.8 0 3483763 124509 None code32 Providing and fixing white vitreous china water closet squatting pan (Indian type) :.Orissa pattern W.C. pan of size 580x440 mm Each 2750.58 2750.58 2.0 False None None False None False 5501.16 0 3483764 124509 None code33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work.20 mm nominal dia Pipes MT 256.06 256.06 30.0 False None None False None False 7681.8 0 3483765 124509 None code34 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall..25 mm nominal dia Pipes MT 375.23 375.23 25.0 False None None False None False 9380.75 0 3483766 124509 None code35 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :. One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Each 5255.71 5255.71 3.0 False None None False None False 15767.13 0 3483767 124509 None code36 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :.Single squatting plate with 5 litre P.V.C. automatic flushing cistern Each 7811.59 7811.59 2.0 False None None False None False 15623.18 0 3483768 124509 None code37 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Each 4862.78 4862.78 2.0 False None None False None False 9725.56 0 3483769 124509 None code38 Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with Each 11261.92 11261.92 2.0 False None None False None False 22523.84 0 3483770 124509 None code39 Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 @ 6kg/ m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drain- age of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete Sqm 1380.6 1380.6 2.26 False None None False None False 3120.156 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1720439179000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1720439179000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1720439179000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1720439179000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1720439179000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1720439179000 0 None None ELIGIBILITY Department Registration Details None 1720439179000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1720439179000 0 None None ELIGIBILITY List of existing commitments and ongoing work None 1720439179000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1720439179000 0 None None ELIGIBILITY Banker Details None 1720439188000 0 None None ELIGIBILITY Before tendering for the works the tenderer may inspect the site personally. None 1720439195000 0 None None ELIGIBILITY G.S.T. Registration from Competent authority is compulsory None 1720439200000 0 None None ELIGIBILITY All the items rates snow in eproc inclusive of GST 18 percent so the contractor should coat rates including GST in tenders. None 1720439210000 0 None None ELIGIBILITY Addendum/Corrigendum will be published in the website/newspaper for all modifications/ corrections, if any. None 1720439216000 0 None None ELIGIBILITY Necessary documents as per notification and bid documents None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText PWD Contractor Civil Registration Certificate Government True Technical Bid Annual Turnover Certificate Certified from Charted Accountant with UDIN Number in all classes of Civil Engineering works only for last Five Financial years ie 2019-20,2020-21,2021-22, 2022-23 and 2023-24 Certified from Charted Accountant Profit and Loss, balance sheet shall be enclosed True Technical Bid Work done Certificate For General Category Contractors KW-1 of this notification Construction Building Works of this notification value not less than 50percentage of the amount put to tender in any one of the last five financial year period 2019-20,2020-21,2021-22, 2022-23 and 2023-24 True Technical Bid As per PWD Code 251. Jurisdiction Contractors registered under class I and II may ender for works anywhere in the state. Contractors registered under class III may tender for works within the districts of the Public works Department circles where in they are registered. Contractors registered under Class IV may tender for works within the district or within the division whichever is applicable, where they are registered. These registrations are valid for all. True Technical Bid Tender Capacity as per KW1 Eligible Tenderers will be qualified only if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under for General Assessed available tender capacity equal to bid formula True Technical Bid Contact details phone number and email id True Technical Bid For Other Necessary Document as per Tender Bid Document KW1 and Notification True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None