createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1720523218681 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 673000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 09-08-2024 16:00:00 tenderQueryClose 29-07-2024 16:00:00 technicalBidOpen 12-08-2024 16:01:00 publishedDate 09-07-2024 17:47:32 publishedByPost EWHFWD_CE_CEOFF_BNG publishedByUser KPE16838 - BALEKATTE KUMARASWAMY PAVITHRA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 31-07-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Gnanesh Kumar V P splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08029557023 mobileNumber 9686183379 tenderSupplierList None
tenderSchedule	createdTs 1720523218716 version 4 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT364 title CONSTRUCTION OF BSC NURSING GIRLS HOSTEL IN THE PREMISES OF BIDAR INSTITUTE OF MEDICAL SCIENCES(BRIMS) AT BIDAR DISTRICT description CONSTRUCTION OF BSC NURSING GIRLS HOSTEL IN THE PREMISES OF BIDAR INSTITUTE OF MEDICAL SCIENCES(BRIMS) AT BIDAR DISTRICT category WORKS categoryText Works ecv 44802273.01 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3521 locationName EWHFWD Chief Engineer Office Bengaluru provisionalAmount 45000000.0 groupOverheadTotal 0.0 fileNumber HFW/AEE/BRIMS/HOSTEL
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1720523219000 0 None None Buildings GROUND FLOOR(CIVIL WORKS) 20764505.08 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3497218 124918 None V-3 P.No 7 It.No 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer In area of light jungle Sqm 486.93 486.93 6.94 False None None False None False 3379.2942 0 3497219 124918 None V-1 P.No 8 It.No 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 117.71 117.71 208.08 False None None False None False 24493.0968 0 3497220 124918 None V-1 P.No 8 It.No 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 126.38 126.38 444.12 False None None False None False 56127.8856 0 3497221 124918 None V-1 P.No 8 It.No 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Cum 449.76 449.76 291.04 False None None False None False 130898.1504 0 3497222 124918 None V-3 P.No 3 It.No 1.1A Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum Cum 167.27 167.27 385.73 False None None False None False 64521.0571 0 3497223 124918 None V-2 P.No 5 It.No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 146.2 146.2 624.4 False None None False None False 91287.28 0 3497224 124918 None V-1 P.No 7 It.No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 329.57 329.57 468.69 False None None False None False 154466.1633 0 3497225 124918 None V-1 P.No 7 It.No 1.8 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 587.29 587.29 407.88 False None None False None False 239543.8452 0 3497226 124918 None V-1 P.No 15 It.No 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Including FormWork Cum 7420.37 7420.37 132.31 False None None False None False 981789.1547 0 3497227 124918 None V-1 P.No 15 It.No 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including FormWorkFOOTINGS Cum 8478.33 8478.33 147.29 False None None False None False 1248773.2257 0 3497228 124918 None V-1 P.No 16 It.No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork COLUMNS Cum 14413.41 14413.41 36.96 False None None False None False 532719.6336 0 3497229 124918 None V-1 P.No 16 It.No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork PLINTH BEAM Cum 12717.72 12717.72 52.34 False None None False None False 665645.4648 0 3497230 124918 None V-1 P.No 16 It.No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC BEAMS Cum 12717.72 12717.72 29.99 False None None False None False 381404.4228 0 3497231 124918 None V-1 P.No 16 It.No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC SLAB Cum 12717.72 12717.72 91.58 False None None False None False 1164688.7976 0 3497232 124918 None V-1 P.No 16 It.No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC STAIRCASE Cum 12293.79 12293.79 6.1 False None None False None False 74992.119 0 3497233 124918 None V-1 P.No 16 It.No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork LINTELS Cum 13565.56 13565.56 10.7 False None None False None False 145151.492 0 3497234 124918 None V-1 P.No 16 It.No 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork Cum 9036.03 9036.03 7.83 False None None False None False 70752.1149 0 3497235 124918 None V-2P43I8.16 a Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. Sqm 1533.88 1533.88 5.58 False None None False None False 8559.0504 0 3497236 124918 None V-1 P.No 18 It.No 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 110837.22 110837.22 46.51 False None None False None False 5155039.1022 0 3497237 124918 None 18-19 SR P.No 15 It.No 4.21 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Rmtr 38.94 38.94 95.9 False None None False None False 3734.346 0 3497238 124918 None Data Rate Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. Rmtr 90.45 90.45 96.9 False None None False None False 8764.605 0 3497239 124918 None V-2 P.No 9 It.No 5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7915.97 7915.97 14.35 False None None False None False 113594.1695 0 3497240 124918 None V-2 P.No 14 It.No 6.80 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes andsizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost ofall materials, labour, scaffolding and usage charges of machinery & otherincidental charges complete as per the direction of engineer incharge ofwork. Cum 9873.59 9873.59 171.01 False None None False None False 1688482.6259 0 3497241 124918 None V-2 P.No 14 It.No 6.12 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes andsizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost ofall materials, labour, scaffolding and usage charges of machinery & otherincidental charges complete as per the direction of engineer incharge ofwork. Sqm 1242.72 1242.72 143.9 False None None False None False 178827.408 0 3497242 124918 None V-2 P.No 105 It.No 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial Sqm 4115.96 4115.96 34.23 False None None False None False 140889.3108 0 3497243 124918 None V-2 P.No 100 It.No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 122431.79 122431.79 0.79 False None None False None False 96721.1141 0 3497244 124918 None V-2 P.No 105 It.No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1258.82 1258.82 15.0 False None None False None False 18882.3 0 3497245 124918 None V-2 P.No 219 It.No 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm No 464.63 464.63 15.0 False None None False None False 6969.45 0 3497246 124918 None V-2 P.No 219 It.No 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm No 185.85 185.85 30.0 False None None False None False 5575.5 0 3497247 124918 None V-2 P.No 219 It.No 22.15.9 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm No 86.73 86.73 60.0 False None None False None False 5203.8 0 3497248 124918 None V-2 P.No 219 It.No 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm No 123.9 123.9 15.0 False None None False None False 1858.5 0 3497249 124918 None V-2 P.No 105 It.No 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1303.43 1303.43 15.0 False None None False None False 19551.45 0 3497250 124918 None V-2 P.No 69 It.No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm No 74.34 74.34 90.0 False None None False None False 6690.6 0 3497251 124918 None DATA RATE Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications. Rmtr 15.0 15.0 95.6 False None None False None False 1434.0 0 3497252 124918 None V-2 P.No 110 It.No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 8343.43 8343.43 53.4 False None None False None False 445539.162 0 3497253 124918 None V-2 P.No 109 It.No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7085.84 7085.84 4.86 False None None False None False 34437.1824 0 3497254 124918 None V-2 P.No 86 It.No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 208.15 208.15 1268.82 False None None False None False 264104.883 0 3497255 124918 None V-2 P.No 111 It.No 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm Rmtr 869.78 869.78 70.0 False None None False None False 60884.6 0 3497256 124918 None V-2 P.No 112 It.No 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness Sqm 4317.92 4317.92 23.52 False None None False None False 101557.4784 0 3497257 124918 None V-2 P.No 107 It.No 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. No 1380.25 1380.25 15.0 False None None False None False 20703.75 0 3497258 124918 None V-2 P.No 109 It.No 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 168.5 168.5 86.4 False None None False None False 14558.4 0 3497259 124918 None V-2 P.No 41 It.No 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside) Sqm 386.57 386.57 1559.25 False None None False None False 602759.2725 0 3497260 124918 None V-2 P.No 43 It.No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 261.43 261.43 1071.99 False None None False None False 280250.3457 0 3497261 124918 None V-2 P.No 50 It.No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 123.9 123.9 2628.76 False None None False None False 325703.364 0 3497262 124918 None V-2 P.No 42 It.No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside) Sqm 432.41 432.41 458.28 False None None False None False 198164.8548 0 3497263 124918 None V-2 P.No 41 It.No 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. Sqm 438.61 438.61 49.86 False None None False None False 21869.0946 0 3497264 124918 None V-2 P.No 43 It.No 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide Rmtr 47.08 47.08 841.9 False None None False None False 39636.652 0 3497265 124918 None 18-19 SR P.No 69 It.No 10.5.2 Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. Sqm 283.2 283.2 25.0 False None None False None False 7080.0 0 3497266 124918 None V-2 P.No 54 It.No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 64.43 64.43 540.08 False None None False None False 34797.3544 0 3497267 124918 None V-2 P.No 61 It.No 9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Sqm 1455.83 1455.83 682.55 False None None False None False 993676.7665 0 3497268 124918 None V-2 P.No 59 It.No 9.1 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. Sqm 558.79 558.79 28.28 False None None False None False 15802.5812 0 3497269 124918 None V-2 P.No 62 It.No 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm Sqm 1642.91 1642.91 455.1 False None None False None False 747688.341 0 3497270 124918 None V-2 P.No 63 It.No 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 3533.63 3533.63 83.32 False None None False None False 294422.0516 0 3497271 124918 None V-2 P.No 64 It.No 9.32 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sqm 3199.1 3199.1 34.56 False None None False None False 110560.896 0 3497272 124918 None V-2 P.No 41 It.No 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 365.51 365.51 592.5 False None None False None False 216564.675 0 3497273 124918 None V-2 P.No 150 It.No 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) Sqm 761.99 761.99 48.36 False None None False None False 36849.8364 0 3497274 124918 None V-2 P.No 60 It.No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1101.47 1101.47 27.51 False None None False None False 30301.4397 0 3497275 124918 None V-2 P.No 65 It.No 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1795.31 1795.31 137.4 False None None False None False 246675.594 0 3497276 124918 None V-2 P.No 85 It.No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 700.04 700.04 360.9 False None None False None False 252644.436 0 3497277 124918 None V-2 P.No 48 It.No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 157.35 157.35 2628.76 False None None False None False 413635.386 0 3497278 124918 None V-2 P.No 46 It.No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 193.28 193.28 458.28 False None None False None False 88576.3584 0 3497279 124918 None V-2 P.No 47 It.No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 61.95 61.95 57.36 False None None False None False 3553.452 0 3497280 124918 None V-2 P.No 48 It.No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 142.49 142.49 57.36 False None None False None False 8173.2264 0 3497281 124918 None V-2 P.No 47 It.No 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 65.67 65.67 139.97 False None None False None False 9191.8299 0 3497282 124918 None V-2 P.No 54 It.No 8.82 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)" Sqm 838.8 838.8 139.97 False None None False None False 117406.836 0 3497283 124918 None V-2 P.No 181 It.no 18.1 Providing and supplying aluminium extruded tubular and other alu- minium sections as per the architectural drawings and approved draw- ings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment. Kg 504.27 504.27 304.2 False None None False None False 153398.934 0 3497284 124918 None V-2 P.No 183 It.No 18.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Sqm 3770.28 3770.28 40.2 False None None False None False 151565.256 0 3497285 124918 None V-2P181I18.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum- smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality t design, within and all around the perimeter for holding glass.(d)Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete.This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-33010 testing method for a range upto 50 mm,.5. Seismic Movement Test (upto 30 mm) as per AAMA 501.409 testing method for Qualitative test, Tests to be conducted on site.6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml Sqm 3326.72 3326.72 40.2 False None None False None False 133734.144 0 3497286 124918 None V-2 P.No 24 It.No 7.31 Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. Sqm 1578.49 1578.49 104.1 False None None False None False 164320.809 0 3497287 124918 None V-2 P.No 28 It.No 7.41 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Sqm 2097.63 2097.63 156.11 False None None False None False 327461.0193 0 3497288 124918 None V-2 P.No 63 It.No 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 5335.13 5335.13 4.776 False None None False None False 25480.58088 0 3497289 124918 None Data rate Providing and fixing aluminium coated and polyester based netted curtains complete. The work includes cost of all materials, labour charges, lead and lift, etc., complete. Rmtr 2596.0 2596.0 20.0 False None None False None False 51920.0 0 3497290 124918 None V-1 (CPWD) P.No 205 It.No 9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to bepaid for separately). Rmtr 1541.11 1541.11 30.0 False None None False None False 46233.3 0 3497291 124918 None V-1 (CPWD) P.No 205 It.No 9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Sqm 6790.22 6790.22 13.0 False None None False None False 88272.86 0 3497292 124918 None V-2P72I10.19 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification. Sqm 4469.07 4469.07 12.0 False None None False None False 53628.84 0 3497293 124918 None V-2 P.No 87 It.No 11.35.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. Kg 560.03 560.03 57.6 False None None False None False 32257.728 0 3497294 124918 None V-2 P.No 89 It.No 11.37.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 1224.13 1224.13 5.76 False None None False None False 7050.9888 0 1720523219000 0 None None Buildings FIRST FLOOR(CIVIL WORKS) 16859692.42 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3497295 124919 None V-1 P.No 16 It.No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork COLUMNS Cum 14557.55 14557.55 24.19 False None None False None False 352147.1345 0 3497296 124919 None V-1 P.No 16 It.No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC BEAMS Cum 13701.22 13701.22 28.98 False None None False None False 397061.3556 0 3497297 124919 None V-1 P.No 16 It.No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC SLAB Cum 12844.89 12844.89 92.58 False None None False None False 1189179.9162 0 3497298 124919 None V-1 P.No 16 It.No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC STAIRCASE Cum 12416.73 12416.73 5.84 False None None False None False 72513.7032 0 3497299 124919 None V-1 P.No 16 It.No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork LINTELS Cum 13701.22 13701.22 13.27 False None None False None False 181815.1894 0 3497300 124919 None V-1 P.No 16 It.No 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork Cum 9126.39 9126.39 9.37 False None None False None False 85514.2743 0 3497301 124919 None V-1 P.No 18 It.No 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 111945.6 111945.6 25.51 False None None False None False 2855732.256 0 3497302 124919 None 18-19 SR P.No 15 It.No 4.21 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS Rmtr 38.94 38.94 108.6 False None None False None False 4228.884 0 3497303 124919 None Data Rate Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. Rmtr 86.14 86.14 108.6 False None None False None False 9354.804 0 3497304 124919 None V-2 P.No 17 It.No 6.32 roviding Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes andsizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost ofall materials, labour, scaffolding and usage charges of machinery & otherincidental charges complete as per the direction of engineer incharge ofwork. Cum 9972.33 9972.33 225.93 False None None False None False 2253048.5169 0 3497305 124919 None V-2 P.No 17 It.No 6.12 Providing Half brick masonry with common burnt clay Non Modular bricksof class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1cement : 3 coarse sand) including cost of all materials, labour, scaffoldingand usage charges of machinery & other incidental charges complete asper the direction of engineer incharge of work. Sqm 1255.14 1255.14 354.24 False None None False None False 444620.7936 0 3497306 124919 None V-2 P.No 105 It.No 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial Sqm 4157.12 4157.12 39.9 False None None False None False 165869.088 0 3497307 124919 None V-2 P.No 100 It.No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 123656.1 123656.1 0.97 False None None False None False 119946.417 0 3497308 124919 None V-2 P.No 105 It.No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1271.41 1271.41 19.0 False None None False None False 24156.79 0 3497309 124919 None V-2 P.No 218 It.No 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm No 688.26 688.26 19.0 False None None False None False 13076.94 0 3497310 124919 None V-2 P.No 219 It.No 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm No 469.27 469.27 19.0 False None None False None False 8916.13 0 3497311 124919 None V-2 P.No 219 It.No 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm No 187.71 187.71 38.0 False None None False None False 7132.98 0 3497312 124919 None V-2 P.No 219 It.No 22.15.9 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm No 87.6 87.6 76.0 False None None False None False 6657.6 0 3497313 124919 None V-2 P.No 219 It.No 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm No 125.14 125.14 19.0 False None None False None False 2377.66 0 3497314 124919 None V-2 P.No 105 It.No 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1316.46 1316.46 19.0 False None None False None False 25012.74 0 3497315 124919 None V-2 P.No 69 It.No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm No 75.08 75.08 114.0 False None None False None False 8559.12 0 3497316 124919 None DATA RATE Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications. Rmtr 15.0 15.0 117.8 False None None False None False 1767.0 0 3497317 124919 None V-2 P.No 110 It.No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 8426.86 8426.86 56.7 False None None False None False 477802.962 0 3497318 124919 None V-2 P.No 109 It.No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7156.7 7156.7 10.8 False None None False None False 77292.36 0 3497319 124919 None V-2 P.No 86 It.No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 210.23 210.23 1417.5 False None None False None False 298001.025 0 3497320 124919 None V-2 P.No 111 It.No 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm Rmtr 878.48 878.48 118.8 False None None False None False 104363.424 0 3497321 124919 None V-2 P.No 112 It.No 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness Sqm 4361.09 4361.09 37.8 False None None False None False 164849.202 0 3497322 124919 None V-2 P.No 107 It.No 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. No 1394.05 1394.05 19.0 False None None False None False 26486.95 0 3497323 124919 None V-2 P.No 41 It.No 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside) Sqm 390.43 390.43 1715.31 False None None False None False 669708.4833 0 3497324 124919 None V-2 P.No 43 It.No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 264.04 264.04 893.0 False None None False None False 235787.72 0 3497325 124919 None V-2 P.No 50 It.No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 103.87 103.87 2608.0 False None None False None False 270892.96 0 3497326 124919 None V-2 P.No 42 It.No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside) Sqm 436.74 436.74 634.14 False None None False None False 276954.3036 0 3497327 124919 None V-2 P.No 41 It.No 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. Sqm 442.99 442.99 12.26 False None None False None False 5431.0574 0 3497328 124919 None V-2 P.No 43 It.No 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide Rmtr 47.55 47.55 841.9 False None None False None False 40032.345 0 3497329 124919 None 18-19 SR P.No 69 It.No 10.5.2 Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. Sqm 283.2 283.2 25.0 False None None False None False 7080.0 0 3497330 124919 None V-2 P.No 54 It.no 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 65.07 65.07 529.2 False None None False None False 34435.044 0 3497331 124919 None V-2 P.No 61 It.No 9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Sqm 1470.38 1470.38 340.0 False None None False None False 499929.2 0 3497332 124919 None V-2 P.No 62 It.No 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 3085.93 3085.93 310.59 False None None False None False 958458.9987 0 3497333 124919 None V-2 P.No 64 It.No 9.30 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 5388.49 5388.49 3.36 False None None False None False 18105.3264 0 3497334 124919 None V-2 P.No 41 It.No 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 369.16 369.16 412.92 False None None False None False 152433.5472 0 3497335 124919 None V-2 P.No 23 It.No 7.18 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Cum 2524.05 2524.05 24.7 False None None False None False 62344.035 0 3497336 124919 None V-2 P.No 150 It.No 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) Sqm 769.6 769.6 138.66 False None None False None False 106712.736 0 3497337 124919 None V-2 P.No 60 It.No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1112.49 1112.49 82.32 False None None False None False 91580.1768 0 3497338 124919 None V-2 P.No 65 It.No 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1813.26 1813.26 412.92 False None None False None False 748731.3192 0 3497339 124919 None V-2 P.No 85 It.No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 707.04 707.04 270.77 False None None False None False 191445.2208 0 3497340 124919 None V-2 P.No 48 It.No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 158.93 158.93 2608.0 False None None False None False 414489.44 0 3497341 124919 None V-2 P.No 46 It.No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 195.22 195.22 634.14 False None None False None False 123796.8108 0 3497342 124919 None V-2 P.No 47 It.No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 62.57 62.57 67.5 False None None False None False 4223.475 0 3497343 124919 None V-2 P.No 48 It.No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.91 143.91 67.5 False None None False None False 9713.925 0 3497344 124919 None V-2 P.No 47 It.No 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 66.32 66.32 95.76 False None None False None False 6350.8032 0 3497345 124919 None V-2 P.No 181 It.No 18.1 Providing and supplying aluminium extruded tubular and other alu- minium sections as per the architectural drawings and approved draw- ings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment. Kg 508.06 508.06 2340.0 False None None False None False 1188860.4 0 3497346 124919 None V-2 P.No 183 It.No 18.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Sqm 3807.98 3807.98 72.0 False None None False None False 274174.56 0 3497347 124919 None V-2P181ITEM18.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum- smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect Sqm 3359.98 3359.98 72.0 False None None False None False 241918.56 0 3497348 124919 None V-2P159ITM18.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge. Sqm 5203.28 5203.28 72.0 False None None False None False 374636.16 0 3497349 124919 None V-2P159ITM18.50 Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 g/m2,made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete Sqm 2426.45 2426.45 72.0 False None None False None False 174704.4 0 3497350 124919 None V-2P84ITM11.25.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 170.19 170.19 761.4 False None None False None False 129582.666 0 3497351 124919 None W.S & UGD SRP35ITM1201 PVC pipes of 6 Kg/cm2 for 110mm(1.894) Rmtr 319.1 319.1 54.0 False None None False None False 17231.4 0 3497352 124919 None V-2P61ITM9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Sqm 441.74 441.74 345.14 False None None False None False 152462.1436 0 1720523219000 0 None None Buildings WATER SUPPLY AND SANITARY WORKS 1308144.11 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3497353 124920 None V-2P28ITM14.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines m 270.1 270.1 45.0 False None None False None False 12154.5 0 3497354 124920 None V-5P190ITM16.7.4 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:" 50mm nominal bore pipes, From Sink & Urinal lines m 172.22 172.22 35.0 False None None False None False 6027.7 0 3497355 124920 None V-5P113ITM10.1.5 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter m 272.58 272.58 250.0 False None None False None False 68145.0 0 3497356 124920 None V-5P125ITM13.48 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines m 509.23 509.23 175.0 False None None False None False 89115.25 0 3497357 124920 None V-5ITM10.14.8 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.110mm(weight of pipe -1.894 kg) m 360.55 360.55 100.0 False None None False None False 36055.0 0 3497358 124920 None V-2P136ITM14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Nos 1511.58 1511.58 22.0 False None None False None False 33254.76 0 3497359 124920 None V-2P118ITM13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter Nos 345.68 345.68 18.0 False None None False None False 6222.24 0 3497360 124920 None V-2P127ITM14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. Nos 6891.32 6891.32 18.0 False None None False None False 124043.76 0 3497361 124920 None V-2P130ITM14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Nos 614.54 614.54 18.0 False None None False None False 11061.72 0 3497362 124920 None CPWD SR, V-2,P370ITM17.78 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Nos 16152.29 16152.29 20.0 False None None False None False 323045.8 0 3497363 124920 None V-2PA16I166 C.P. Brass stop cock (concealed) 15 mm Nos 650.48 650.48 61.0 False None None False None False 39679.28 0 3497364 124920 None V-2P132ITM14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Nos 3818.6 3818.6 22.0 False None None False None False 84009.2 0 3497365 124920 None V-2P133ITM14.10.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm Nos 5358.7 5358.7 1.0 False None None False None False 5358.7 0 3497366 124920 None V-2P122ITM13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." GROUND FLOOR 15 mm nominal dia Pipes m 382.85 382.85 50.0 False None None False None False 19142.5 0 3497367 124920 None V-2P122ITM13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 15 mm nominal dia Pipes m 382.85 382.85 50.0 False None None False None False 19142.5 0 3497368 124920 None V-2P122ITM13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 20 mm nominal dia Pipes m 469.58 469.58 360.0 False None None False None False 169048.8 0 3497369 124920 None V-2P122ITM13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 25 mm nominal dia Pipes m 591.0 591.0 50.0 False None None False None False 29550.0 0 3497370 124920 None V-2P122ITM13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work)" External & Shafts & Terrace 25 mm nominal dia Pipes m 366.74 366.74 100.0 False None None False None False 36674.0 0 3497371 124920 None CPWD SR, V-2,P377ITM1927 Brass full way valve with C.I. wheel (screwed end) 25 mm dia Each 442.5 442.5 8.0 False None None False None False 3540.0 0 3497372 124920 None V2P123ITM13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. Ltr 11.15 11.15 3500.0 False None None False None False 39025.0 0 3497373 124920 None MARKET RATE Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards Ground Toilet 10Cms X 7.5Cms Nos 371.7 371.7 52.0 False None None False None False 19328.4 0 3497374 124920 None MARKET RATE Supplying, installing, testing and commissioning approved make Submersible Pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller with cabling between hePumps, control panel, UGR & OHT etc.,. complete.approx. Length of cable = 80. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter,.(1 no. working and 1no. Standby ) Sump To OHT (DOMESTIC)2.00 HP Each 41300.0 41300.0 2.0 False None None False None False 82600.0 0 3497375 124920 None MARKET RATE Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). Nos 2183.0 2183.0 20.0 False None None False None False 43660.0 0 3497376 124920 None MARKET RATE Supplying, installing, testing and commissioning approved make water level controller (RMG or equivalent )for the Underground Sump and overhead tank. The quoted rate shall include for necessary wiring in PVC conduit between the control panel, underground sump and overhead tank. (length of cable approx. 150 mts.) Each 8260.0 8260.0 1.0 False None None False None False 8260.0 0 1720523219000 0 None None Buildings EXTERNAL WS AND SANITARY WORKS 243908.92 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3497377 124921 None V-1P8ITM1.5.1 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work." In ordinary/soft rock without blasting upto 1.5 m depth For Sewer allround Cum 449.76 449.76 68.0 False None None False None False 30583.68 0 3497378 124921 None V-1P7ITM1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 329.57 329.57 68.0 False None None False None False 22410.76 0 3497379 124921 None V-5P113ITM10.2.4 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:( For external Sanitary Work ).Pipes of SN4, 160mm dia. m 713.66 713.66 150.0 False None None False None False 107049.0 0 3497380 124921 None V-5P189ITM16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) Nos 6757.51 6757.51 12.0 False None None False None False 81090.12 0 3497381 124921 None SR 2018-19ITM12.112.2 Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead).15cms x 10cms Nos 346.92 346.92 8.0 False None None False None False 2775.36 0 1720523219000 0 None None Buildings INTERNAL ELECTRICAL WORKS 2730510.39 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3497382 124922 None V-6 PWD SR P.No 5 It.No 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch Point 333.29 333.29 68.0 False None None False None False 22663.72 0 3497383 124922 None V-6 PWD SR P.No 5 It.No 2.2.2 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch Point 469.58 469.58 100.0 False None None False None False 46958.0 0 3497384 124922 None V-6 PWD SR P.No 5 It.No 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch Point 687.65 687.65 130.0 False None None False None False 89394.5 0 3497385 124922 None V-6 PWD SR P.No 5 It.No 2.2.4 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches Point 838.8 838.8 25.0 False None None False None False 20970.0 0 3497386 124922 None V-6 PWD SR P.No 8 It.No 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way Each 170.98 170.98 100.0 False None None False None False 17098.0 0 3497387 124922 None V-6 PWD SR P.No 8 It.No 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way Each 219.3 219.3 15.0 False None None False None False 3289.5 0 3497388 124922 None V-6 PWD SR P.No 8 It.No 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way Each 272.58 272.58 60.0 False None None False None False 16354.8 0 3497389 124922 None V-6 PWD SR P.No 8 It.No 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way Each 323.38 323.38 20.0 False None None False None False 6467.6 0 3497390 124922 None V-6 PWD SR P.No 8 It.No 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way Each 395.24 395.24 70.0 False None None False None False 27666.8 0 3497391 124922 None V-6 PWD SR P.No 8 It.No 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module Each 199.48 199.48 100.0 False None None False None False 19948.0 0 3497392 124922 None V-6 PWD SR P.No 8 It.No 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 216.83 216.83 15.0 False None None False None False 3252.45 0 3497393 124922 None V-6 PWD SR P.No 8 It.No 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 289.93 289.93 60.0 False None None False None False 17395.8 0 3497394 124922 None V-6 PWD SR P.No 8 It.No 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 351.88 351.88 20.0 False None None False None False 7037.6 0 3497395 124922 None V-6 PWD SR P.No 8 It.No 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module Each 426.22 426.22 70.0 False None None False None False 29835.4 0 3497396 124922 None V-6 PWD SR P.No 9 It.No 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch Each 126.38 126.38 265.0 False None None False None False 33490.7 0 3497397 124922 None V-6 PWD SR P.No 9 It.No 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket Each 211.87 211.87 210.0 False None None False None False 44492.7 0 3497398 124922 None V-6 PWD SR P.No 9 It.No 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. Each 442.32 442.32 62.0 False None None False None False 27423.84 0 3497399 124922 None V-6 PWD SR P.No 9 It.No 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each 403.91 403.91 20.0 False None None False None False 8078.2 0 3497400 124922 None V-6 PWD SR P.No 9 It.No 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Each 292.4 292.4 25.0 False None None False None False 7310.0 0 3497401 124922 None V-6 PWD SR P.No 9 It.No 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch Each 223.02 223.02 5.0 False None None False None False 1115.1 0 3497402 124922 None V-6 PWD SR P.No 4 It.No 1.13 Supplyin and Fixing Metal Fan Box with Round Hook. No 201.96 201.96 62.0 False None None False None False 12521.52 0 3497403 124922 None V-6 PWD SR P.No 2 It.No 1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick Rmtr 81.77 81.77 2600.0 False None None False None False 212602.0 0 3497404 124922 None V-6 PWD SR P.No 2 It.No 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick Rmtr 96.64 96.64 2500.0 False None None False None False 241600.0 0 3497405 124922 None V-6 PWD SR P.No 2 It.No 1.2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 32mm dia 2.5mm thick Rmtr 127.62 127.62 300.0 False None None False None False 38286.0 0 3497406 124922 None V-6 PWD SR P.No 2 It.No 1.3.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick Rmtr 84.25 84.25 1300.0 False None None False None False 109525.0 0 3497407 124922 None V-6 PWD SR P.No 2 It.No 1.3.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick Rmtr 97.88 97.88 1200.0 False None None False None False 117456.0 0 3497408 124922 None V-6 PWD SR P.No 2 It.No 1.3.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick Rmtr 122.66 122.66 150.0 False None None False None False 18399.0 0 3497409 124922 None V-6 PWD SR P.No 5 It.No 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm Rmtr 32.21 32.21 1400.0 False None None False None False 45094.0 0 3497410 124922 None V-6 PWD SR P.No 5 It.No 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm Rmtr 52.04 52.04 2800.0 False None None False None False 145712.0 0 3497411 124922 None V-6 PWD SR P.No 5 It.No 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm Rmtr 78.06 78.06 1000.0 False None None False None False 78060.0 0 3497412 124922 None V-6 PWD SR P.No 5 It.No 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm Rmtr 113.99 113.99 450.0 False None None False None False 51295.5 0 3497413 124922 None V-6 PWD SR P.No 18 It.No 5.19.11 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4 Way TP & N Each 5003.08 5003.08 4.0 False None None False None False 20012.32 0 3497414 124922 None V-6 PWD SR P.No 18 It.No 5.19.12 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N Each 6120.66 6120.66 3.0 False None None False None False 18361.98 0 3497415 124922 None V-6 PWD SR P.No 18 It.No 5.18.8 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure Each 2297.11 2297.11 1.0 False None None False None False 2297.11 0 3497416 124922 None V-6 PWD SR P.No 17 It.No 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP Each 514.19 514.19 108.0 False None None False None False 55532.52 0 3497417 124922 None V-6 PWD SR P.No 17 It.No 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 Each 2127.36 2127.36 7.0 False None None False None False 14891.52 0 3497418 124922 None V-6 PWD SR P.No 18 It.No 5.20.8 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole Each 6377.13 6377.13 7.0 False None None False None False 44639.91 0 3497419 124922 None V-6 PWD SR P.No 18 It.No 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole Each 5299.2 5299.2 1.0 False None None False None False 5299.2 0 3497420 124922 None V-6 BSR P.No 13 It.No 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 16 sqmm Km 192613.7 192613.7 0.06 False None None False None False 11556.822 0 3497421 124922 None V-6 BSR P.No 13 It.No 32.03 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 10sqmm Km 156042.14 156042.14 0.1 False None None False None False 15604.214 0 3497422 124922 None V-6 BSR P.No 13 It.No 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 35 sqmm Km 219103.52 219103.52 0.08 False None None False None False 17528.2816 0 3497423 124922 None V-6 BSR P.No 13 It.No 32.14 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 95 sqmm Km 539741.85 539741.85 0.1 False None None False None False 53974.185 0 3497424 124922 None PWD SR 19-20 ITM 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia Each 151.16 151.16 4.0 False None None False None False 604.64 0 3497425 124922 None PWD SR 19-20 ITM 6.11.4 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 45mm dia Each 240.37 240.37 6.0 False None None False None False 1442.22 0 3497426 124922 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff" 2.5 sqmm to 25 sqmm Km 20021.0 20021.0 0.16 False None None False None False 3203.36 0 3497427 124922 None 31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff" 35 sqmm to 95 sqmm Km 29298.63 29298.63 0.18 False None None False None False 5273.7534 0 3497428 124922 None V-6 PWD SR P 54 ITM 12.57 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 5273.18 5273.18 8.0 False None None False None False 42185.44 0 3497429 124922 None V-6 PWD SR P 54 Itm 12.58.2 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip Rmtr 101.6 101.6 50.0 False None None False None False 5080.0 0 3497430 124922 None V-6 PWD SR P 55 ITM 12.58.3 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip 25x6mm GI strip Rmtr 158.6 158.6 50.0 False None None False None False 7930.0 0 3497431 124922 None V-6 PWD SR P 44 Itm 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W Each 1096.52 1096.52 55.0 False None None False None False 60308.6 0 3497432 124922 None V-6 PWD SR P 43 Itm 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w Each 854.91 854.91 85.0 False None None False None False 72667.35 0 3497433 124922 None V-6 PWD SR P 47 ITM 11.11.3 Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K Each 184.61 184.61 5.0 False None None False None False 923.05 0 3497434 124922 None V-6 PWD SR P 47 ITM 11.11.5 Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K Each 333.29 333.29 40.0 False None None False None False 13331.6 0 3497435 124922 None V-6 PWD SR P 45 ITM 11.6.3 Supplying of recess mounting non integral type .LED . W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' - 34 -36watt Each 5641.17 5641.17 2.0 False None None False None False 11282.34 0 3497436 124922 None V-6 PWD SR P 46 ITM 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts No 4985.74 4985.74 4.0 False None None False None False 19942.96 0 3497437 124922 None V-6 PWD SR P 30 ITM 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 1848.59 1848.59 20.0 False None None False None False 36971.8 0 3497438 124922 None V-6 PWD SR P 30 ITM 6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) Each 3697.18 3697.18 62.0 False None None False None False 229225.16 0 3497439 124922 None V-6 PWD SR P 52 ITM 12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin Each 78.06 78.06 95.0 False None None False None False 7415.7 0 3497440 124922 None V-6 PWD SR P 56 ITM 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders Each 151.16 151.16 235.0 False None None False None False 35522.6 0 3497441 124922 None V-6 PWD SR P 57 ITM 13.11 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 390.29 390.29 62.0 False None None False None False 24197.98 0 3497442 124922 None V-6 PWD SR P 57 ITM 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 875.97 875.97 20.0 False None None False None False 17519.4 0 3497443 124922 None V-6 PWD SR P 56 ITM 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length Each 1810.18 1810.18 4.0 False None None False None False 7240.72 0 3497444 124922 None V-6 PWD SR P 56 ITM 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 200.72 200.72 4.0 False None None False None False 802.88 0 3497445 124922 None V-6 PWD SR P 20 ITM 5.42.1 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete Sq CM 0.62 0.62 140000.0 False None None False None False 86800.0 0 3497446 124922 None V-6 PWD SR P 20 ITM 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips Rmtr 4255.97 4255.97 8.0 False None None False None False 34047.76 0 3497447 124922 None V-6 PWD SR P 20 ITM 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm Rmtr 377.9 377.9 12.0 False None None False None False 4534.8 0 3497448 124922 None V-6 PWD SR P 20 ITM 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel Rmtr 936.68 936.68 12.0 False None None False None False 11240.16 0 3497449 124922 None V-6 PWD SR P 16 ITM 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 100Amps 25kA Each 10515.39 10515.39 1.0 False None None False None False 10515.39 0 3497450 124922 None V-6 PWD SR P 18 ITM 5.17.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN Each 2972.36 2972.36 6.0 False None None False None False 17834.16 0 3497451 124922 None V-6 PWD SR P 19 ITM 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C Each 638.09 638.09 12.0 False None None False None False 7657.08 0 3497452 124922 None V-6 PWD SR P 19 ITM 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound Each 696.32 696.32 3.0 False None None False None False 2088.96 0 3497453 124922 None 5.34 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery Kvar 594.72 594.72 20.0 False None None False None False 11894.4 0 3497454 124922 None 5.31 Supplying and fixing Trivector Meter suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wire Each 5439.21 5439.21 1.0 False None None False None False 5439.21 0 3497455 124922 None 5.39 Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three place LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect I disconnect banks, with automatic recognition or with standard programs. Each 26811.96 26811.96 1.0 False None None False None False 26811.96 0 3497456 124922 None 9.3.1 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, Each 18692.79 18692.79 1.0 False None None False None False 18692.79 0 3497457 124922 None 9.5.9 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150 AH capacity Each 19693.91 19693.91 1.0 False None None False None False 19693.91 0 3497458 124922 None 29.03 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 Mtr wherever necessary as directed In soil (hard) Cum 481.97 481.97 80.0 False None None False None False 38557.6 0 3497459 124922 None 13.4.1 Single bracket 1.5 Mtr. Length Each 1810.18 1810.18 4.0 False None None False None False 7240.72 0 3497460 124922 None V-6 PWD SR P 9 ITM 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch Each 205.67 205.67 8.0 False None None False None False 1645.36 0 3497461 124922 None 31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff" 35 sqmm to 95 sqmm Km 29298.63 29298.63 0.18 False None None False None False 5273.7534 0 3497462 124922 None 5.17.7 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 32Amps TPN Each 2201.7 2201.7 3.0 False None None False None False 6605.1 0 3497463 124922 None 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply No 64.43 64.43 25.0 False None None False None False 1610.75 0 3497464 124922 None 11.11.7 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffusercomprising of LED source with CCT 6500 degree K, CRI70efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should of lamp wattage.short circuit & open circuit protection to be integrated in the circuit, THD less than 20 Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABLCPRI accredited laboratory with 2 years Warranty against anymanufacturing defect working under standard electrical condition. 18 W,6500K Each 527.81 527.81 50.0 False None None False None False 26390.5 0 3497465 124922 None 49.05 Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 50mm Mtr 474.54 474.54 5.0 False None None False None False 2372.7 0 1720523219000 0 None None Buildings SUMP TANK 522012.61 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3497466 124923 None V-1P8ITM1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 126.38 126.38 55.46 False None None False None False 7009.0348 0 3497467 124923 None V-1P8ITM1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth water sump Upto 3.0 mtrs depth Consider 10% Qty as soft rock/ordinary rock Cum 449.76 449.76 4.02 False None None False None False 1808.0352 0 3497468 124923 None V-1P9ITM1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m water sump Upto 3.0 mtrs depth Consider 10% Qty as soft rock/ordinary rock Cum 526.58 526.58 2.14 False None None False None False 1126.8812 0 3497469 124923 None V-3P3ITMA Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) For 5 KM lead = 2.5 x 1.28 x 5 + loading and Unloading charges =68 = 84.00/cum Cum 167.27 167.27 50.0 False None None False None False 8363.5 0 3497470 124923 None V-1P7ITM1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Total E/W Qty. It no. 2 and 3 4 DeductFire fighting,raw water,treated water sump Rain water sump Cum 329.57 329.57 11.39 False None None False None False 3753.8023 0 3497471 124923 None V-1P15ITM2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates water sump Cum 7420.37 7420.37 2.18 False None None False None False 16176.4066 0 3497472 124923 None V-1P15ITM2.4.2 Providing and laying in position Cement Concrete for all Sub structures ofbuilding, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed with super plasticisers, laid in layers, well compactedusing needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirementsof relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications 2 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" A. Raft water sump Cum 8069.22 8069.22 4.37 False None None False None False 35262.4914 0 3497473 124923 None V-1P15ITM2.4.2 Providing and laying in position Cement Concrete for all Sub structures ofbuilding, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed with super plasticisers, laid in layers, well compactedusing needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirementsof relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications 2 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" sump tank-walls Sump tank Cum 13318.13 13318.13 8.28 False None None False None False 110274.1164 0 3497474 124923 None V-1P15ITM2.4.2 Providing and laying in position Cement Concrete for all Sub structures ofbuilding, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed with super plasticisers, laid in layers, well compactedusing needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirementsof relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications 2 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" Sump tank Cover slab Cum 11751.3 11751.3 4.37 False None None False None False 51353.181 0 3497475 124923 None V-1P18ITM2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Raft Roof slabs Sump Walls Tonne 110837.22 110837.22 2.23 False None None False None False 247167.0006 0 3497476 124923 None V-2P150ITM15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) GROUND FLOOR Sump Sump Base Cum 761.99 761.99 27.14 False None None False None False 20680.4086 0 3497477 124923 None V-2P41ITM8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. Inside Wall Sump Wall Base slab Cum 438.61 438.61 27.14 False None None False None False 11903.8754 0 3497478 124923 None V-2P41ITM8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. cover Slab Cum 386.57 386.57 5.52 False None None False None False 2133.8664 0 3497479 124923 None XXIV18-19 SR624 C. I Manhole covers with frame 610 * 455mm size (38kgs) No 2500.0 2500.0 2.0 False None None False None False 5000.0 0 1720523219000 0 None None Buildings SEPTIC Tank 831371.7 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3497480 124924 None V-3p7itm2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle Septic tank Sqm 486.93 486.93 36.06 False None None False None False 17558.6958 0 3497481 124924 None V-1p8itm1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Septic tank Soak pit Cum 117.71 117.71 18.03 False None None False None False 2122.3113 0 3497482 124924 None V-1p8itm1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m 0.00 Mtrs - 3.00 Mtrs do- Ordinary/Hard soil-Mechanical Means Septic tank Soak pit Cum 126.38 126.38 97.36 False None None False None False 12304.3568 0 3497483 124924 None V-1p8itm1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Septic tank Cum 449.76 449.76 5.41 False None None False None False 2433.2016 0 3497484 124924 None V-1p9itm1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m Septic tank Soak pit Cum 526.58 526.58 5.41 False None None False None False 2848.7978 0 3497485 124924 None V-3p3itmA Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) For 10 KM lead = 2.5 x 1.28 x 10 + loading and Unloading charges =68 = 100.00 Cum 167.27 167.27 108.18 False None None False None False 18095.2686 0 3497486 124924 None V-1P15ITM2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 7420.37 7420.37 3.08 False None None False None False 22854.7396 0 3497487 124924 None V-1P15ITM2.4.2 Providing and laying in position Cement Concrete for all Sub structures ofbuilding, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed with super plasticisers, laid in layers, well compactedusing needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirementsof relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications 2 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" BOTTOM SLAB Cum 8069.22 8069.22 4.11 False None None False None False 33164.4942 0 3497488 124924 None V-1P15ITM2.4.2 Providing and laying in position Cement Concrete for all Sub structures ofbuilding, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed with super plasticisers, laid in layers, well compactedusing needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirementsof relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications 2 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" TOP SLAB Septic tank Soak pit Cum 9401.04 9401.04 3.08 False None None False None False 28955.2032 0 3497489 124924 None V-1P15ITM2.4.2 Providing and laying in position Cement Concrete for all Sub structures ofbuilding, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed with super plasticisers, laid in layers, well compactedusing needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirementsof relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications 2 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesRC WALL Septic tank Soak pit Baffel wall Cum 8617.62 8617.62 15.35 False None None False None False 132280.467 0 3497490 124924 None V-1P18ITM2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Raft Slab RC wall Tonne 110837.22 110837.22 3.54 False None None False None False 392363.7588 0 3497491 124924 None V-2P150ITM15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) RC WALL Inside wall Septic tank Soak pit BOTTOM SLAB Septic tank Soak pit Sqm 761.99 761.99 101.56 False None None False None False 77387.7044 0 3497492 124924 None V-2P41ITM8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Top slab Septic tank Soak pit Sqm 386.57 386.57 20.56 False None None False None False 7947.8792 0 3497493 124924 None V-2P41ITM8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. Inside Wall Septic tank Soak pit outer wall Septic tank Soak pit Sqm 438.61 438.61 162.0 False None None False None False 71054.82 0 3497494 124924 None XXIV18-19 SRXXIV (624) C. I Manhole covers 24" x 24" Nos 2500.0 2500.0 4.0 False None None False None False 10000.0 0 1720523219000 0 None None Buildings EXTERNAL ELECTRICAL WORKS 1142127.78 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3497495 124925 None BSR-CDS-15 MATERIAL :RCC dp structure using 9mtr rcc pole with WL145kg Set 25215.4 25215.4 1.0 False None None False None False 25215.4 0 3497496 124925 None BSR-CDS-15 MATERIAL:11KV 45KN Polymeric insulators No 238.36 238.36 6.0 False None None False None False 1430.16 0 3497497 124925 None BSR-CDS-15 Guy Set Complete with No.15 Strain Insulator & Concreting materials No 1426.62 1426.62 2.0 False None None False None False 2853.24 0 3497498 124925 None BSR-CDS-15 Spiral earth electrodes No 292.64 292.64 2.0 False None None False None False 585.28 0 3497499 124925 None BSR-CDS-15 Caution/danger board No 172.28 172.28 1.0 False None None False None False 172.28 0 3497500 124925 None BSR-CDS-15 Anticlimbing device(12mts/1kg GI barbed wire) Kg 109.74 109.74 4.0 False None None False None False 438.96 0 3497501 124925 None BSR 11KV 400amps D/B GOS Set 24223.0 24223.0 1.0 False None None False None False 24223.0 0 3497502 124925 None BSR H frame for mounting gos Set 4878.12 4878.12 1.0 False None None False None False 4878.12 0 3497503 124925 None BSR 11 KV Lightning arrestors metal oxide 9kv 5kvA Set 1575.3 1575.3 1.0 False None None False None False 1575.3 0 3497504 124925 None BSR DOLO cutout(set/3Nos) Set 5720.64 5720.64 1.0 False None None False None False 5720.64 0 3497505 124925 None BSR LABOUR CHARGES:RCC dp structure using 9mtr rcc pole with WL145kg Set 4854.52 4854.52 1.0 False None None False None False 4854.52 0 3497506 124925 None BSR LABOUR CHARGES:Guyset complete Set 528.64 528.64 2.0 False None None False None False 1057.28 0 3497507 124925 None BSR LABOUR CHARGES:Spiral earth electrodes No 82.6 82.6 2.0 False None None False None False 165.2 0 3497508 124925 None BSR LABOUR CHARGES:Guy concreting with Boulders, Mud and Sand No 236.0 236.0 2.0 False None None False None False 472.0 0 3497509 124925 None BSR LABOUR CHARGES:Caution/danger board No 71.98 71.98 1.0 False None None False None False 71.98 0 3497510 124925 None BSR LABOUR CHARGES:Anticlimbing device(12mts/1kg GI barbed wire) Kg 37.76 37.76 4.0 False None None False None False 151.04 0 3497511 124925 None BSR LABOUR CHARGES:11KV 400amps D/B GOS Set 1054.92 1054.92 1.0 False None None False None False 1054.92 0 3497512 124925 None BSR LABOUR CHARGES:H frame for mounting gos Set 285.56 285.56 1.0 False None None False None False 285.56 0 3497513 124925 None BSR LABOUR CHARGES:11 KV Lightning arrestors metal oxide 9kv 5kvA Set 106.2 106.2 1.0 False None None False None False 106.2 0 3497514 124925 None BSR LABOUR CHARGES:DOLO cutout(set/3Nos) Set 210.04 210.04 1.0 False None None False None False 210.04 0 3497515 124925 None BSR MATERIAL PORTION:RCC pole 9mt Long with WL145kg No 8440.54 8440.54 15.0 False None None False None False 126608.1 0 3497516 124925 None BSR MATERIAL PORTION:11kv Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" Set 788.24 788.24 15.0 False None None False None False 11823.6 0 3497517 124925 None BSR MATERIAL PORTION:11KV-5KN Polyclinic pin insulator(24mm dia FRP Rod) No 260.78 260.78 45.0 False None None False None False 11735.1 0 3497518 124925 None BSR MATERIAL PORTION:11KV 45KN Polyclinic insulators No 238.36 238.36 45.0 False None None False None False 10726.2 0 3497519 124925 None BSR MATERIAL PORTION: Guy Set Complete with No. 15 Strain Insulator & Concreting materials Set 1426.62 1426.62 10.0 False None None False None False 14266.2 0 3497520 124925 None BSR MATERIAL PORTION:Rabbit ACSR conductor at 1.5% sag Km 72587.7 72587.7 1.5 False None None False None False 108881.55 0 3497521 124925 None BSR MATERIAL PORTION:PG clamps for rabbit to rabbit conductors No 136.88 136.88 30.0 False None None False None False 4106.4 0 3497522 124925 None BSR MATERIAL PORTION:Spiral earth electrodes No 292.64 292.64 15.0 False None None False None False 4389.6 0 3497523 124925 None BSR MATERIAL PORTION:GI strips with GI wire laying (set/2Nos) Set 338.66 338.66 8.0 False None None False None False 2709.28 0 3497524 124925 None BSR MATERIAL PORTION:Caution /danger board No 172.28 172.28 5.0 False None None False None False 861.4 0 3497525 124925 None BSR MATERIAL PORTION:Anti climbing device (10mts/kg GI barbed wire) Kg 109.74 109.74 15.0 False None None False None False 1646.1 0 3497526 124925 None BSR MATERIAL PORTION:Road cross Guardings with 4pin cross arms,Bolts&units Span 3531.74 3531.74 10.0 False None None False None False 35317.4 0 3497527 124925 None BSR MATERIAL PORTION:Painting of 9m RCC poles with material and labour No 826.0 826.0 15.0 False None None False None False 12390.0 0 3497528 124925 None BSR MATERIAL PORTION:Special 3pin cross arms with clamps braces bolt nuts and washers Set 1431.34 1431.34 15.0 False None None False None False 21470.1 0 3497529 124925 None BSR LABOUR PORTION:Erection of RCC pole 9mt Long with WL145kg No 1582.38 1582.38 15.0 False None None False None False 23735.7 0 3497530 124925 None BSR LABOUR PORTION "Fixing of 11kv Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" Set 143.96 143.96 15.0 False None None False None False 2159.4 0 3497531 124925 None BSR LABOUR PORTION:Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials Set 528.64 528.64 10.0 False None None False None False 5286.4 0 3497532 124925 None BSR LABOUR PORTION;Fixing of Rabbit ACSR conductor at 1.5% sag Km 3892.82 3892.82 1.5 False None None False None False 5839.23 0 3497533 124925 None BSR LABOUR PORTION;Fixing of Spiral earth electrodes No 82.6 82.6 15.0 False None None False None False 1239.0 0 3497534 124925 None BSR LABOUR PORTION:Fixing of GI strips with GI wire laying (set/2Nos) Set 147.5 147.5 8.0 False None None False None False 1180.0 0 3497535 124925 None BSR LABOUR PORTION:Concreting materials for guysets without cement No 236.0 236.0 10.0 False None None False None False 2360.0 0 3497536 124925 None BSR LABOUR PORTION:Fixing of Caution /danger board No 71.98 71.98 5.0 False None None False None False 359.9 0 3497537 124925 None BSR LABOUR PORTION:Fixing of Anti climbing device (10mts/kg GI barbed wire) Kg 37.76 37.76 15.0 False None None False None False 566.4 0 3497538 124925 None BSR LABOUR PORTION:Fixing of Road cross Guardings with 4pin cross arms,Bolts&units Span 711.54 711.54 10.0 False None None False None False 7115.4 0 3497539 124925 None BSR LABOUR PORTION:Fixing of Special 3pin cross arms with clamps braces bolt nuts and washers Set 116.82 116.82 15.0 False None None False None False 1752.3 0 3497540 124925 None BSR Concreting for 9mt rcc pole a) base concrete 1:4:8 500x650x150mm No 322.14 322.14 15.0 False None None False None False 4832.1 0 3497541 124925 None BSR Concreting for 9mt rcc pole b) Pole concrete 1:2:4 650x500x1700mm No 3726.44 3726.44 15.0 False None None False None False 55896.6 0 3497542 124925 None BSR Concreting for 9mt rcc pole c) Coping with CC 1:2:4 No 639.56 639.56 15.0 False None None False None False 9593.4 0 3497543 124925 None BSR Erection of 3phase, 11Kv/433Volts,100KVA BEE -5star rated distribution Transformer centre using DPTS:9mts RCC DP Transformer structure using 9mtrs RCC poles No 38412.5 38412.5 1.0 False None None False None False 38412.5 0 3497544 124925 None BSR 11KV-5KN Polyclinic pin insulator(24mm dia FRP Rod) No 260.78 260.78 3.0 False None None False None False 782.34 0 3497545 124925 None BSR MATERIAL PORTION;11KV 45KN Polyclinic insulators No 238.36 238.36 3.0 False None None False None False 715.08 0 3497546 124925 None BSR MATERIAL PORTION:Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials Set 1426.62 1426.62 4.0 False None None False None False 5706.48 0 3497547 124925 None BSR MATERIAL PORTION:11KV/433V,63KVA,3 phase,50 cycles Distribution Transformer BEE-5star Rated with oil. No 207983.0 207983.0 1.0 False None None False None False 207983.0 0 3497548 124925 None BSR Earthing materials pipe type for grounding Quintal 2092.14 2092.14 3.0 False None None False None False 6276.42 0 3497549 124925 None BSR Caution /danger board No 172.28 172.28 1.0 False None None False None False 172.28 0 3497550 124925 None BSR Anti climbing device (10mts/kg GI barbed wire) Kg 109.74 109.74 2.0 False None None False None False 219.48 0 3497551 124925 None BSR Concreting materials for guysets without cement No 236.0 236.0 4.0 False None None False None False 944.0 0 3497552 124925 None BSR GI wire 8 SWG Kg 91.86 91.86 5.0 False None None False None False 459.3 0 3497553 124925 None BSR Gey wire 7/10 SWGG Kg 94.54 94.54 10.0 False None None False None False 945.4 0 3497554 124925 None BSR 11 KV Lightning arrestors metal oxide 9kv 5kvA Set 2048.48 2048.48 1.0 False None None False None False 2048.48 0 3497555 124925 None BSR LT Distribution Base for 100KVA with MCCB No 20703.1 20703.1 1.0 False None None False None False 20703.1 0 3497556 124925 None BSR LT wiring kit (from DTC to LT line through metering box and LT Distribution Board. Kit 8951.48 8951.48 1.0 False None None False None False 8951.48 0 3497557 124925 None BSR LT metering Box with CT's and necessary wiring for housing ETV meter No 6582.04 6582.04 1.0 False None None False None False 6582.04 0 3497558 124925 None BSR L.T Electronic Tri-vector meter5 , class0.5/1.0 accuracy. No 3908.16 3908.16 1.0 False None None False None False 3908.16 0 3497559 124925 None BSR 11KV solid core type H.G fuse (set/3nos) Set 1217.76 1217.76 1.0 False None None False None False 1217.76 0 3497560 124925 None BSR 11KV 200Amps Single break GOS Set 10767.5 10767.5 1.0 False None None False None False 10767.5 0 3497561 124925 None BSR MATERIAL PORTION:H frame for mounting GOS No 3519.94 3519.94 1.0 False None None False None False 3519.94 0 3497562 124925 None BSR 9mts RCC DP Transformer structure using 9mtrs RCC poles No 6141.9 6141.9 1.0 False None None False None False 6141.9 0 3497563 124925 None BSR LABOUR PORTION Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials Set 528.64 528.64 4.0 False None None False None False 2114.56 0 3497564 124925 None BSR LABOUR PORTION 11KV/433V,63KVA,3 phase,50 cycles Distribution Transformer BEE-5star Rated with oil. No 1018.34 1018.34 1.0 False None None False None False 1018.34 0 3497565 124925 None BSR LABOUR PORTION Earthing materials pipe type for grounding Set 855.5 855.5 3.0 False None None False None False 2566.5 0 3497566 124925 None BSR LABOUR PORTION Caution /danger board No 71.98 71.98 1.0 False None None False None False 71.98 0 3497567 124925 None BSR LABOUR PORTION Anti climbing device (10mts/kg GI barbed wire) Kg 37.76 37.76 2.0 False None None False None False 75.52 0 3497568 124925 None BSR LABOUR PORTION 11 KV Lightning arrestors metal oxide 9kv 5kvA Set 106.2 106.2 1.0 False None None False None False 106.2 0 3497569 124925 None BSR LABOUR PORTION LT wiring kit (from DTC to LT line through metering box and LT Distribution Board. Kit 848.42 848.42 2.0 False None None False None False 1696.84 0 3497570 124925 None BSR LABOUR PORTION LT metering Box with CT's and necessary wiring for housing ETV meter No 767.0 767.0 1.0 False None None False None False 767.0 0 3497571 124925 None BSR LABOUR PORTION L.T Electronic Tri-vector meter5 , class0.5/1.0 accuracy. No 941.64 941.64 1.0 False None None False None False 941.64 0 3497572 124925 None BSR LABOUR PORTION 11KV solid core type H.G fuse (set/3nos) Set 210.04 210.04 1.0 False None None False None False 210.04 0 3497573 124925 None BSR LABOUR PORTION 11KV 200Amps Single break GOS Set 949.9 949.9 1.0 False None None False None False 949.9 0 3497574 124925 None BSR LABOUR PORTION H frame for mounting GOS No 225.38 225.38 1.0 False None None False None False 225.38 0 3497575 124925 None BSR Concreting for 9mt rcc pole a) base concrete 1:4:8 500x650x150mm No 279.66 279.66 2.0 False None None False None False 559.32 0 3497576 124925 None BSR Concreting for 9mt rcc pole b) Pole concrete 1:2:4 650x500x1700mm No 3240.28 3240.28 2.0 False None None False None False 6480.56 0 3497577 124925 None BSR Concreting for 9mt rcc pole c) Coping with CC 1:2:4 No 555.78 555.78 2.0 False None None False None False 1111.56 0 3497578 124925 None BSR 11kv class 3cx95sqmmxLPE ug cable (2run) Km 1316426.0 1316426.0 0.02 False None None False None False 26328.52 0 3497579 124925 None BSR Cable termination kit Indoor HS type suitable for above cable Kit 4679.88 4679.88 2.0 False None None False None False 9359.76 0 3497580 124925 None BSR Cable termination kit Indoor HS type suitable for above cable Kit 4308.18 4308.18 4.0 False None None False None False 17232.72 0 3497581 124925 None BSR Cable covering tiles 250x125x40mm No 11.8 11.8 200.0 False None None False None False 2360.0 0 3497582 124925 None BSR Sand Sqm 2006.0 2006.0 5.0 False None None False None False 10030.0 0 3497583 124925 None BSR Rcc hume pipes 2000mm long 150mm dia No 354.0 354.0 4.0 False None None False None False 1416.0 0 3497584 124925 None BSR Collars for rcc hume pipes No 94.4 94.4 2.0 False None None False None False 188.8 0 3497585 124925 None BSR GI pipe 100mm dia for cable raising drain crossing Mtr 1803.04 1803.04 2.0 False None None False None False 3606.08 0 3497586 124925 None BSR Route and joint indicating stones No 153.4 153.4 2.0 False None None False None False 306.8 0 3497587 124925 None BSR LABOUR PORTION 11kv class 3cx95sqmmxLPE ug cable (2run) Mtr 53.43 53.43 20.0 False None None False None False 1068.6 0 3497588 124925 None BSR Cable termination kit outdoor HS type suitable for above cable Kit 2318.7 2318.7 6.0 False None None False None False 13912.2 0 3497589 124925 None BSR Rcc hume pipes 2000mm long 150mm dia No 60.18 60.18 4.0 False None None False None False 240.72 0 3497590 124925 None BSR GI pipe 100mm dia for cable raising drain crossing Mtr 68.44 68.44 2.0 False None None False None False 136.88 0 3497591 124925 None BSR Route and joint indicating stones No 101.48 101.48 2.0 False None None False None False 202.96 0 3497592 124925 None BSR Cable trench excavation 1000x0.6x1mt in ordinary soil Cum 266.68 266.68 10.0 False None None False None False 2666.8 0 3497593 124925 None BSR Refilling and consolidation Cum 59.0 59.0 10.0 False None None False None False 590.0 0 3497594 124925 None BSR Covering the cable with tiles Km 3378.34 3378.34 0.01 False None None False None False 33.7834 0 3497595 124925 None BSR Spreading sand and forming with sand around the cable Km 11872.0 11872.0 0.25 False None None False None False 2968.0 0 3497596 124925 None BSR PART E- Providing Chain link Fencing to HT Yard Providing chain lin fencing 50mm size of 8gauge properly stretched between rectangular pole and fixed with suitable bolts and nuts the free end shall be welded to the pole and block pipe at top and bottom as required including cost of all materilas labour lead and lifts cutting bending wherever necessary wastage and lapping et complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint Sqm 1164.66 1164.66 120.0 False None None False None False 139759.2 0 1720523219000 0 None None Buildings DESIGN CONSULTANCY CHARGES 400000.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3497597 124926 None DATA RATE The Tenderer (agency) should arrange to obtain (get), detailed Architecturaldrawings and elevations, Structural designs and drawings including Soil exploration & proofchecking by IISC /IIT/NIT/any Engineering college only as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, 3D view, Internal and External Electrical services including electrical infrastructure , Lifts, CCTV/Net working system interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project (This item is included in schedule B as a item) and 6 sets of as built drawings should be submitted to the employer. The Consultancy Fees which is included as an item in schedule B shall be paid on prorate basis of the main work or by negotiation with the employer. - - - - etc., complete with all lead and lift as per detailed specification and directions of the Engineer incharge LS 400000.0 400000.0 1.0 False None None False None False 400000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1720523227000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1720523227000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1720523227000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1720523227000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1720523227000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1720523253000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1720523260000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. None 1720523266000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1720523273000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1720523278000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1720523283000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1720523290000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1720523296000 0 None None ELIGIBILITY All the formats prescribed in the bid documents shall be filled in complete manner. (section 2 & 3 of the bid document) and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose. None 1720523301000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid. None 1720523307000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1720523313000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract Help Desk for more assistance Phone: 080-25501216/ 25501227) None 1720523318000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoide damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1720523324000 0 None None ELIGIBILITY Materials like, steel(primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work. None 1720523330000 0 None None ELIGIBILITY Special Instructions to tenderers - asper bid document (F. Special Conditions of Contract Clause-6) None 1720523337000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work. None 1720523343000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24. None 1720523348000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within weeks time from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive. None 1720523353000 0 None None ELIGIBILITY Tenderer should have latest GST registration & upload latest GST/VAT clearance certificate in their name None 1720523360000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be Inclusive of GST None 1720523365000 0 None None ELIGIBILITY The contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Clause ITT 3.2aTo qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.896.50 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause ITT 3.2bTo qualify for award of this contract,each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24)The tenderer should have been Satisfactorily completed at least one Similar work of value not less than Rs.224.05 Lakhs as prime contractor. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2(c): To qualify for award of this contract,each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24).Executed in any one financial year,the following minimum quantities of work Sl.No Description of key items of works 1. Earthwork Excavation in all kinds of soil 955.00 Cum 2.PCC & RCC 588.00 Cum 3. Steel Reinforcement for RCC work (TMT Steel) 62.24 Tonnes 4.BBM/Concrete Blocks 318.00 Cum. 5. Flooring (Vitrified/Granite/Ceramic/ cladding/dadooing) 2056.00 Sqm 6. Plastering 6092.00 Sqm 7. Painting (OBD/Textured Painting/Wood and Metal Painting) 4972.00 Sqm 8. MS Grill 2149.00 Sqm Note:The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/Semi Government/Government undertaking/ autonomous bodies of Government will be considered, for the clause 3.2 (c) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2d The tenderer or his identified sub contractor should possess required valid electrical license issued by KPWD,Government electrical Inspectorate for executing building electrification works and should have executed similar Building electrical works totaling to Rs.19.37 Lakhs in any one year Note.The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government,Semi Government,Government undertaking,autonomous bodies of Government will be considered, for the clause 3.2d. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2(e):The Tenderer or his identified sub-contractor should possess valid license issued by BWSSB/KUWS&DB for executing water supply/sanitary engineering works and should have executed similar building water supply/sanitary engineering works totaling to Rs.7.76 Lakhs in any one year Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/Semi Government/Government undertaking/ autonomous bodies of Government will be considered, for the clause 3.2 (e). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Class - II & Above PWD Registered Certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Clause ITT 3.3(a) Equipment capacity: Each tenderer should further demonstrate(a) available by owning at least 50% of the required/specified key and critical equipment for this work and (b) the remaining 50%can be deployed on ease/hire basis for all works provided,the relevant documents (commitment agreements etc) for availability for this work are furnished SlNo. Description of Key items of Works. Quantity1.Excavator/JCB 1No 2.Transit Mixer/Concrete Mixer 1 No 3.Needle vibrator with size not less than 20mm 1 No 4.Tipper 1 No 5.Generator 250 KVA 1 No 6. Water Tanker 1 No Note: All Machineries purchased during last five years only should be used and will be considered for evaluation. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Tax Invoice/Agreements from the supplier None None None None Clause ITT 3.6 Tenderers who meet the above specified minimum qualifying criteria,will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity(AxNx1.5-B)where A Maximum value of civil engineering works executed in any one year during the last five years i.e (2019-20-2023-24)(updated to 2024-25 price level)taking into account the completed as well as works in progress .N Number of years prescribed for completion of the works for which tender are invited. B Value at 2024-25 price level, of existing commitments of and ongoing works to be Completed during the next 11 months.Note:(1)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent(2)Tenderer shall submit the list of Ongoing works duly certified by the Auditor/Chartered Accountant. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Certificate issued by the officer not lessthan the rank of Executive Engineer Ongoing commitments and Bids submitted for the works None None None None List of Minimum Key Personnel to be deployed by the contractor at site for Contract work 1) Site Engineer (Civil) B.E. Civil with minimum experience of 7 years in the Construction of buildings 1 (One) 2) Site Engineer (Electrical Engineer) B.E. Electrical with minimum experience of 5 years in the Construction of buildings 1 (One) Note: 1) The tenderer shall submit list and photo identity proof such as Aadhar Card/Voter ID/Employee ID/Pass port/Driving License etc., for the key personnel such as project manager/site engineer to be deployed at each of the worksite. 2) The key personnel deployed at the site for this work should be working for a minimum period of one year with the tenderers and experience certificate has to be furnished in this regard. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Educational and Experience certificates None None None None Clause ITT 3.3(b):Liquid assets and/or availability of credit facilities of not less than Rs.134.43 Lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.,) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate True Technical Bid GST Certificate True Technical Bid ESI & PF Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1720527184000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer, Health and Family Welfare Department, Engineering Wing, 3rd Floor Arogya Soudha 1st Cross Magadi Road street None city Bengaluru state Karnataka pin 560023
tenderRecallDTO	None