| 1720589427000 | 1 | None | None | Buildings | Construction of one room school building in Thallikatte government primary school in Bhadravathi | 1279546.98 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3500932 | 125115 | None | volume-2,chapter-19,pageno-187,itemno-19.7.3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge In cement mortar ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 1080.45 | 1080.45 | 20.74 | False | None | None | False | None | False | 22408.533 | 0 | | 3500933 | 125115 | None | volume-2,chapter-19,pageno-187,itemno-19.9.2 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin-charge.In cement mortar ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 1768.2 | 1768.2 | 7.33 | False | None | None | False | None | False | 12960.906 | 0 | | 3500934 | 125115 | None | volume-1,chapter-1,pageno-8,itemno-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work B. Mechanical Means (i) Depth upto 3 m ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 107.1 | 107.1 | 49.07 | False | None | None | False | None | False | 5255.397 | 0 | | 3500935 | 125115 | None | volume-1,chapter-2,pageno-15,itemno-2.1.3 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 6288.45 | 6288.45 | 11.04 | False | None | None | False | None | False | 69424.488 | 0 | | 3500936 | 125115 | None | volume-1,chapter-2,pageno-16,itemno-2.4.2 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (including centering & the cost of steel reinforcement paidseparately ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 7170.28 | 7170.28 | 9.23 | False | None | None | False | None | False | 66181.6844 | 0 | | 3500937 | 125115 | None | volume-1,chapter-2,pageno-16,itemno-2.4.2 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (including centering & the cost of steel reinforcement paidseparately ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 7303.07 | 7303.07 | 13.14 | False | None | None | False | None | False | 95962.3398 | 0 | | 3500938 | 125115 | None | volume-1,chapter-2,pageno-16,itemno-2.4.2 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (including centering & the cost of steel reinforcement paidseparately ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 9626.77 | 9626.77 | 0.94 | False | None | None | False | None | False | 9049.1638 | 0 | | 3500939 | 125115 | None | volume-1,chapter-2,pageno-16,itemno-2.4.2 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (including centering & the cost of steel reinforcement paidseparately ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 7966.98 | 7966.98 | 15.95 | False | None | None | False | None | False | 127073.331 | 0 | | 3500940 | 125115 | None | volume-,chapter-2,pageno-18,itemno-2.11-h | Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification h.All other type of structures ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Tonne | 93929.85 | 93929.85 | 2.14 | False | None | None | False | None | False | 201009.879 | 0 | | 3500941 | 125115 | None | volume-1,chapter-1,pageno-7,itemno-1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 279.3 | 279.3 | 45.08 | False | None | None | False | None | False | 12590.844 | 0 | | 3500942 | 125115 | None | volume-2,chapter-6,pageno-14,itemno-6.8 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 8367.45 | 8367.45 | 29.69 | False | None | None | False | None | False | 248429.5905 | 0 | | 3500943 | 125115 | None | volume-2,chapter-11,pageno-77,itemno-11.5.2 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 4454.1 | 4454.1 | 5.52 | False | None | None | False | None | False | 24586.632 | 0 | | 3500944 | 125115 | None | volume-2,chapter-11,pageno-77,itemno-11.4 | Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 5482.05 | 5482.05 | 4.59 | False | None | None | False | None | False | 25162.6095 | 0 | | 3500945 | 125115 | None | volume-2,chapter-8,pageno-48,itemno-8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sq | 120.75 | 120.75 | 22.14 | False | None | None | False | None | False | 2673.405 | 0 | | 3500946 | 125115 | None | volume-2,chapter-8,pageno-41,itemno-8.1.2 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 253.05 | 253.05 | 152.25 | False | None | None | False | None | False | 38526.8625 | 0 | | 3500947 | 125115 | None | volume-2,chapter-8,pageno-41,itemno-8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 292.95 | 292.95 | 146.51 | False | None | None | False | None | False | 42920.1045 | 0 | | 3500948 | 125115 | None | volume-2,chapter-8,pageno-46,itemno-8.33.1 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 165.9 | 165.9 | 152.25 | False | None | None | False | None | False | 25258.275 | 0 | | 3500949 | 125115 | None | volume-2,chapter-8,pageno-46,itemno-8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 182.7 | 182.7 | 146.51 | False | None | None | False | None | False | 26767.377 | 0 | | 3500950 | 125115 | None | volume-2,chapter-9,pageno-60,itemno-9.12.2 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 1202.25 | 1202.25 | 58.75 | False | None | None | False | None | False | 70632.1875 | 0 | | 3500951 | 125115 | None | volume-2,chapter-9,pageno-60,itemno-9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 915.67 | 915.67 | 4.32 | False | None | None | False | None | False | 3955.6944 | 0 | | 3500952 | 125115 | None | volume-2,chapter-10,pageno-71,itemno-10.14 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle green, black of any size as
approved by Engineer- in-Charge, in skirting, risers of steps and dados,
over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg/m2, including pointing in white
cement mixed with pigment of matching shade complete ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 1139.18 | 1139.18 | 9.45 | False | None | None | False | None | False | 10765.251 | 0 | | 3500953 | 125115 | None | volume-2,chapter-13,pageno-122,itemno-13.31.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall e - 25 mm nominal dia Pipes ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | m | 327.54 | 327.54 | 30.0 | False | None | None | False | None | False | 9826.2 | 0 | | 3500954 | 125115 | None | volume-2,chapter-13,pageno-122,itemno-13.31.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall e - 20mm nominal dia pipes ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | m | 249.26 | 249.26 | 50.0 | False | None | None | False | None | False | 12463.0 | 0 | | 3500955 | 125115 | None | volume-2,chapter-13,pageno-120,itemnono-13.18.1 | providing and fixing PTMT stop cock of approved quality and colour
13.18.1 15 mm nominal bore, 86 mm long, weighing not less than 88 g ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 134.93 | 134.93 | 2.0 | False | None | None | False | None | False | 269.86 | 0 | | 3500956 | 125115 | None | volume-2,chapter-13,pageno-121,itemno-13.24 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing
not less than 85 g ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 170.98 | 170.98 | 4.0 | False | None | None | False | None | False | 683.92 | 0 | | 3500957 | 125115 | None | volume-2,chapter-14,pageno-131,itemno-14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Pan | 5030.52 | 5030.52 | 2.0 | False | None | None | False | None | False | 10061.04 | 0 | | 3500958 | 125115 | None | volume-2,chapter-13,itemno-13.34 | Providing and placing on terrace(at all floor levels), polyethylene water storage tanks, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Ltr | 9.27 | 9.27 | 500.0 | False | None | None | False | None | False | 4635.0 | 0 | | 3500959 | 125115 | None | volume-5,pageno-149,itemno-13.4.1 | Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete 0.50 HP/0.37kw-5STG(stage) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 10475.1 | 10475.1 | 1.0 | False | None | None | False | None | False | 10475.1 | 0 | | 3500960 | 125115 | None | volume-2,chapter-15,pageno-148,itemno-15.1 | polyurethane based single Component for New surface
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas /Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 857.85 | 857.85 | 62.9 | False | None | None | False | None | False | 53958.765 | 0 | | 3500961 | 125115 | None | volume-2,chapter-8,pageno-52,itemno-8.70 | Painting (one coats) with black Japan paint of approved brand and manufacture to give an even shade. including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 71.4 | 71.4 | 9.0 | False | None | None | False | None | False | 642.6 | 0 | | 3500962 | 125115 | None | volume-5,chapter-9,pageno-95,itemno-9.1.4 | Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test
as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. HDPE Grade PE80-PN6.0,110mm dia ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Mtr | 492.45 | 492.45 | 14.0 | False | None | None | False | None | False | 6894.3 | 0 | | 3500963 | 125115 | None | volume-2,chapter-11,pageno-84,itemno-11.25.2 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Kgs | 142.8 | 142.8 | 84.0 | False | None | None | False | None | False | 11995.2 | 0 | | 3500964 | 125115 | None | volume2,chapter-8,pageno-44,itemno-8.16.a | Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia
mild steel bars at 20 cms. c to c both horizontally and vertically fixed with
chicken mesh for drop chajja,facia, backing to cup boards including cost
of all materials, labour, providing and removing form work usage charges,
curing, complete as per specifications ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 1299.9 | 1299.9 | 5.56 | False | None | None | False | None | False | 7227.444 | 0 | | 3500965 | 125115 | None | volume-2,chapter-8,pageno-49,itemno-8.49 | Lettering with black Japan paint of approved brand and manufacture to give
an even shade including preparing the surface after thoroughly cleaning the
surface to remove all dirt, dust and foreign matter, cost of materials, labour
complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Per Cmtr | 4.2 | 4.2 | 2100.0 | False | None | None | False | None | False | 8820.0 | 0 |
|