| 1720696625000 | 0 | None | None | Buildings | Construction of R O Plant (1000 LPH) Sump at Karanji nature Park | 760046.8 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3510251 | 125716 | None | 01 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. 1.5.1 In ordinary/soft rock without blasting upto 1.5 m depth (PWD, CSR, 2023-24, Page No. 6, Item No. 1.5.1) | Cum | 313.95 | 313.95 | 70.06 | False | None | None | False | None | False | 21995.337 | 0 | | 3510252 | 125716 | None | 02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. 2.1.2 Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (PWD, CSR, 2023-24, Page No. 15, Item No. 2.1.2) | Cum | 5947.2 | 5947.2 | 10.46 | False | None | None | False | None | False | 62207.712 | 0 | | 3510253 | 125716 | None | 03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(PWD, CSR, 2023-24,Page No.9, Item No. 5.4) | Cum | 6708.45 | 6708.45 | 7.36 | False | None | None | False | None | False | 49374.192 | 0 | | 3510254 | 125716 | None | 04 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. 2.3.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD, CSR, 2023-24, Page No. 16, Item No. 2.3.1)
"
| Cum | 7242.74 | 7242.74 | 1.31 | False | None | None | False | None | False | 9487.9894 | 0 | | 3510255 | 125716 | None | 05 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (PWD, CSR, 2023-24, ,Page No. 15, Item No. 2.1.4)
| Cum | 6527.85 | 6527.85 | 2.4 | False | None | None | False | None | False | 15666.84 | 0 | | 3510256 | 125716 | None | 06 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(PWD, CSR, 2023-24, Page No. 14, Item No. 6.8)
| Cum | 8367.45 | 8367.45 | 21.24 | False | None | None | False | None | False | 177724.638 | 0 | | 3510257 | 125716 | None | 07 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD, CSR, 2023-24,Page No.16, Item No. 2.5.1) | Cum | 7594.38 | 7594.38 | 0.76 | False | None | None | False | None | False | 5771.7288 | 0 | | 3510258 | 125716 | None | 08 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD, CSR, 2023-24,Page No. 16, Item No. 2.5.1) | Cum | 10442.25 | 10442.25 | 2.31 | False | None | None | False | None | False | 24121.5975 | 0 | | 3510259 | 125716 | None | 09 | Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings (PWD, CSR, 20232-24, Page No. 18, Item No.2.11 a)
| t | 93929.85 | 93929.85 | 0.4 | False | None | None | False | None | False | 37571.94 | 0 | | 3510260 | 125716 | None | 10 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD, CSR, 2023-24, Page No. 83, Item No. 11.25.1) | Kg | 118.65 | 118.65 | 200.0 | False | None | None | False | None | False | 23730.0 | 0 | | 3510261 | 125716 | None | 11 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD, CSR, 2023-24,Page No. 82, Item No. 11.16.1) | Kg | 142.8 | 142.8 | 380.0 | False | None | None | False | None | False | 54264.0 | 0 | | 3510262 | 125716 | None | 12 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever Required.(PWD, CSR, 2023-24, Page No. 26, Item No. 7.38)
| Sqm | 596.4 | 596.4 | 37.5 | False | None | None | False | None | False | 22365.0 | 0 | | 3510263 | 125716 | None | 13 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD, CSR, 2023-24, Page No. 41, Item No. 8.2.2) | Sqm | 292.95 | 292.95 | 246.32 | False | None | None | False | None | False | 72159.444 | 0 | | 3510264 | 125716 | None | 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. 9.12.2 Size of Tile 600x600 mm (PWD, CSR, 2023-24,Page No. 60, Item No. 9.12.2) | Sqm | 1202.25 | 1202.25 | 39.16 | False | None | None | False | None | False | 47080.11 | 0 | | 3510265 | 125716 | None | 15 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. (PWD, CSR, 2023-24,Page No. 71, Item No. 10.14) | Sqm | 1161.3 | 1161.3 | 38.03 | False | None | None | False | None | False | 44164.239 | 0 | | 3510266 | 125716 | None | 16 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD, CSR, 2023-24,Page No. 48, Item No. 8.39) | Sqm | 133.35 | 133.35 | 29.61 | False | None | None | False | None | False | 3948.4935 | 0 | | 3510267 | 125716 | None | 17 | Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD, CSR, 2023-24, Page No. 48, Item No. 8.36.2) | Sqm | 180.6 | 180.6 | 53.33 | False | None | None | False | None | False | 9631.398 | 0 | | 3510268 | 125716 | None | 18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD, CSR, 2023-24, Page No. 48, Item No. 8.40) | Sqm | 120.75 | 120.75 | 34.91 | False | None | None | False | None | False | 4215.3825 | 0 | | 3510269 | 125716 | None | 19 | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. (PWD, CSR, 2023-24, Page No. 191, Item No.16.10 , Vol-5) | Each | 4447.8 | 4447.8 | 2.0 | False | None | None | False | None | False | 8895.6 | 0 | | 3510270 | 125716 | None | 20 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary
hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: 10.1.7 PVC pipes 110mm dia., 6 kg/sqcm & class 3 (PWD, CSR, 2023-24, Page No. 113, Item No. 10.1.8, Vol-5)"
| m | 431.55 | 431.55 | 32.0 | False | None | None | False | None | False | 13809.6 | 0 | | 3510271 | 125716 | None | 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
13.33.3 25 mm nominal dia Pipes (PWD, CSR, 2023-24, Page No.122, Item No. 13.33.3) | m | 310.8 | 310.8 | 30.0 | False | None | None | False | None | False | 9324.0 | 0 | | 3510272 | 125716 | None | 22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (PWD, CSR, 2023-24,Page No. 123, Item No. 13.34) | l | 9.45 | 9.45 | 2000.0 | False | None | None | False | None | False | 18900.0 | 0 | | 3510273 | 125716 | None | 23 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(PWD, CSR, 2023-24, Page No. 7, Item No. 1.9) | Cum | 279.3 | 279.3 | 70.06 | False | None | None | False | None | False | 19567.758 | 0 | | 3510274 | 125716 | None | 24 | Supplying heavy gauge PVC Conduit Pipe.dia.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing UorJ hooks and cement plastering upto the wall surface and run with18SWG GIfishwire run throughout the conduit wherever necessary.1.3.2 25 mm dia 2 mm thick (PWD, CSR-Electrical, 2023-24,Page No. 2, Item No.1.3.2)
| Mtr | 82.95 | 82.95 | 40.0 | False | None | None | False | None | False | 3318.0 | 0 | | 3510275 | 125716 | None | 25 | Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 1.4.5 200 x 90 x 65 mm (PWD, CSR-Electrical, 2023-24, Page No. 2, Item No.1.4.5) | Nos | 187.95 | 187.95 | 4.0 | False | None | None | False | None | False | 751.8 | 0 |
|