| 1720762706000 | 0 | None | None | Buildings | Construction of toilet for disabled people in court premises under TMC Athani Limit | 140213.78 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3512689 | 125924 | None | 001 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m CSR 2023-24 Volume 1 (P No: 5 I.No:1.4.1) | Cum | 254.1 | 254.1 | 4.27 | False | None | None | False | None | False | 1085.007 | 0 | | 3512690 | 125924 | None | 002 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately).Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates.CSR 2023-24 Volume 1 (P No: 15 I.No:2.1.3) | Cum | 6288.45 | 6288.45 | 0.34 | False | None | None | False | None | False | 2138.073 | 0 | | 3512691 | 125924 | None | 003 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.CSR 2023-24 Volume 1 (Page No.15,I.No. 2.3.1) | Cum | 7271.45 | 7271.45 | 2.15 | False | None | None | False | None | False | 15633.6175 | 0 | | 3512692 | 125924 | None | 004 | Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. PWD Common DSR 2023-24 Volume 1 (P No: 111 Addendum 1 SL.NO 4) | Cum | 4362.87 | 4362.87 | 0.21 | False | None | None | False | None | False | 916.2027 | 0 | | 3512693 | 125924 | None | 005 | Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. PWD Common DSR 2023-24 Volume 1 (P No: 111 Addendum 1 SL.NO 4) | Cum | 3272.15 | 3272.15 | 0.04 | False | None | None | False | None | False | 130.886 | 0 | | 3512694 | 125924 | None | 006 | Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. PWD Common DSR 2023-24 Volume 1 (P No: 111 Addendum 1 SL.NO 4) | Cum | 3635.73 | 3635.73 | 0.42 | False | None | None | False | None | False | 1527.0066 | 0 | | 3512695 | 125924 | None | 007 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures .PWD Common SR 2023-24 Volume 1 (P No: 18 I.No:2.11 (h) ) | Kg | 81381.33 | 81381.33 | 0.103 | False | None | None | False | None | False | 8382.27699 | 0 | | 3512696 | 125924 | None | 008 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.CSR.P No.13/I.No.6.7 Vol-2 | Cum | 8376.9 | 8376.9 | 4.95 | False | None | None | False | None | False | 41465.655 | 0 | | 3512697 | 125924 | None | 009 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR 2023-24 Page No 41 I No 8.1.1 (Volume-III) | Sqm | 262.65 | 262.65 | 36.86 | False | None | None | False | None | False | 9681.279 | 0 | | 3512698 | 125924 | None | 010 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.CSR.2023-24 P No.60/I No. 9.11 Vol-2 | Sqm | 915.67 | 915.67 | 2.7 | False | None | None | False | None | False | 2472.309 | 0 | | 3512699 | 125924 | None | 011 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete CSR.2023-24 P No.71/I No.10.14 Vol-2 | Sqm | 1139.18 | 1139.18 | 25.65 | False | None | None | False | None | False | 29219.967 | 0 | | 3512700 | 125924 | None | 012 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. SR 2023-24 Page No 104 I No 12.54(Volume-II) | m | 327.54 | 327.54 | 5.7 | False | None | None | False | None | False | 1866.978 | 0 | | 3512701 | 125924 | None | 013 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. SR 2023-24 Page No104 I No 12.53(Volume-II) | Nos | 1635.64 | 1635.64 | 1.58 | False | None | None | False | None | False | 2584.3112 | 0 | | 3512702 | 125924 | None | 014 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc 100x58x1.9mm. CSR.2023-24 P No.106/I No.12.68.2 Vol -2
| Nos | 44.29 | 44.29 | 2.0 | False | None | None | False | None | False | 88.58 | 0 | | 3512703 | 125924 | None | 015 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 100mm. CSR.2023-24 P No.107/I No.12.73.2 Vol -2 | Nos | 38.11 | 38.11 | 2.0 | False | None | None | False | None | False | 76.22 | 0 | | 3512704 | 125924 | None | 016 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete CSR.2023-24 P No.105/I No.12.63 Vol -2
| Nos | 133.9 | 133.9 | 1.0 | False | None | None | False | None | False | 133.9 | 0 | | 3512705 | 125924 | None | 017 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including cost of materials, labour, usage charges of machinery complete as per specifications.CSRP.2023-24 No. 86 /I No.11.31 Vol-2
| Kg | 118.45 | 118.45 | 8.1 | False | None | None | False | None | False | 959.445 | 0 | | 3512706 | 125924 | None | 018 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid SR 2023-24 Page No 131 I No 14.3.1 (Volume-II)
| Each | 6275.85 | 6275.85 | 1.0 | False | None | None | False | None | False | 6275.85 | 0 | | 3512707 | 125924 | None | 019 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 SR 2023-24 Page No 119 I No 13.12 (Volume-III)
| Nos | 666.75 | 666.75 | 1.0 | False | None | None | False | None | False | 666.75 | 0 | | 3512708 | 125924 | None | 020 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore SR 2023-24 Page No 117 I No 13.4.1 Base Rate 549 Add 5% 27.45=576.45 (Volume-III)
| LS | 576.45 | 576.45 | 1.0 | False | None | None | False | None | False | 576.45 | 0 | | 3512709 | 125924 | None | 021 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. SR 2023-24 Page No123 I No 13.34 (Volume-II)
| m | 9.45 | 9.45 | 500.0 | False | None | None | False | None | False | 4725.0 | 0 | | 3512710 | 125924 | None | 022 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:. 110mm (weight of pipe -1.894 kg) CSR.2023-24 P No.113/I No.10.1.7 Vol-5
| m | 423.33 | 423.33 | 6.0 | False | None | None | False | None | False | 2539.98 | 0 | | 3512711 | 125924 | None | 023 | KSRB13-10 : Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgs/sqcm working pressure of outside diameter chemp plast I Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM and testing complete as per specifications. Specification No.KBS 13.2.154/13.9 25MM dia UPVC Pipe PWD SR 2019-20 P.No 96 I.No. 13.76
| m | 121.54 | 121.54 | 30.0 | False | None | None | False | None | False | 3646.2 | 0 | | 3512712 | 125924 | None | 024 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR 2023-24 Page No 45 I No 8.25 (Volume-III)
| Cum | 143.85 | 143.85 | 15.38 | False | None | None | False | None | False | 2212.413 | 0 | | 3512713 | 125924 | None | 025 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. CSR. 2023-24 P No.7/I No.1.8 Vol-1
| Cum | 497.7 | 497.7 | 2.43 | False | None | None | False | None | False | 1209.411 | 0 |
|