| 1720848843000 | 0 | None | None | Other Works | Construction of Compound wall, RCC box drain & cloth drying yard to newly constructed Girls Hostel at GKVK (SC) | 2987422.74 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3520050 | 126376 | None | GKVK01 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenances required to complete the work. In all kinds of soils Depth upto 1.5 m | Cum | 204.6 | 204.6 | 140.0 | False | None | None | False | None | False | 28644.0 | 0 | | 3520051 | 126376 | None | GKVK02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse Aggregates | Cum | 5726.6 | 5726.6 | 41.0 | False | None | None | False | None | False | 234790.6 | 0 | | 3520052 | 126376 | None | GKVK03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5887.2 | 5887.2 | 46.5 | False | None | None | False | None | False | 273754.8 | 0 | | 3520053 | 126376 | None | GKVK04 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6300.8 | 6300.8 | 44.0 | False | None | None | False | None | False | 277235.2 | 0 | | 3520054 | 126376 | None | GKVK05 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7060.28 | 7060.28 | 27.0 | False | None | None | False | None | False | 190627.56 | 0 | | 3520055 | 126376 | None | GKVK06 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc., complete as per specifications. | Sqm | 1315.6 | 1315.6 | 265.0 | False | None | None | False | None | False | 348634.0 | 0 | | 3520056 | 126376 | None | GKVK07 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 272.8 | 272.8 | 530.0 | False | None | None | False | None | False | 144584.0 | 0 | | 3520057 | 126376 | None | GKVK08 | Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with ce- ment mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications | Sqm | 2600.4 | 2600.4 | 7.2 | False | None | None | False | None | False | 18722.88 | 0 | | 3520058 | 126376 | None | GKVK09 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kg | 134.2 | 134.2 | 3880.0 | False | None | None | False | None | False | 520696.0 | 0 | | 3520059 | 126376 | None | GKVK10 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 611.6 | 611.6 | 205.0 | False | None | None | False | None | False | 125378.0 | 0 | | 3520060 | 126376 | None | GKVK11 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Kg | 121.0 | 121.0 | 2200.0 | False | None | None | False | None | False | 266200.0 | 0 | | 3520061 | 126376 | None | GKVK12 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia 4 mm) | Sqm | 743.6 | 743.6 | 180.0 | False | None | None | False | None | False | 133848.0 | 0 | | 3520062 | 126376 | None | GKVK13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 99.0 | 99.0 | 250.0 | False | None | None | False | None | False | 24750.0 | 0 | | 3520063 | 126376 | None | GKVK14 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) | Rmtr | 940.5 | 940.5 | 45.0 | False | None | None | False | None | False | 42322.5 | 0 | | 3520064 | 126376 | None | GKVK15 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/mm2 with tape (0.52 mm thick) and weight 43.478 g/m (cost of M.S. angle, C.C. blocks shall be paid separately) | Rmtr | 286.0 | 286.0 | 330.0 | False | None | None | False | None | False | 94380.0 | 0 | | 3520065 | 126376 | None | GKVK16 | RCC pipe NP3 600 mm dia & 2.5 M long | Mtr | 2304.0 | 2304.0 | 11.5 | False | None | None | False | None | False | 26496.0 | 0 | | 3520066 | 126376 | None | GKVK17 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Kg | 101.2 | 101.2 | 2000.0 | False | None | None | False | None | False | 202400.0 | 0 | | 3520067 | 126376 | None | GKVK18 | Providing Flush / Ruled/ Struck or weathered pointing Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer- in-charge. | Sqm | 149.6 | 149.6 | 227.0 | False | None | None | False | None | False | 33959.2 | 0 |
|