| 3525945 | 126727 | None | code01 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (PWD SR 2023-24 Vol-II/ITEM No. 8.6.2, P.No.42) | Sqm | 480.48 | 480.48 | 50.18 | False | None | None | False | None | False | 24110.4864 | 0 |
| 3525946 | 126727 | None | code02 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.51 P.No. 50) | Sqm | 112.0 | 112.0 | 144.84 | False | None | None | False | None | False | 16222.08 | 0 |
| 3525947 | 126727 | None | code03 | Providing Ceramic tiles of approved make, shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick cement mortar 1:3 mix, flush pointing with white cement using colour pigment including cost of materials, labour, curing, complete as per specifications. Specification No. KBS (CSR 2023-24, Page No.105 & 106, Item No.14.36.4) Ceramic tiles 30cmx60cm 6mm thick | Sqm | 1348.48 | 1348.48 | 18.62 | False | None | None | False | None | False | 25108.6976 | 0 |
| 3525948 | 126727 | None | code04 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (CSR 2023-24 Vol-II/Item 9.39, P.No.65) | Sqm | 1622.88 | 1622.88 | 50.8 | False | None | None | False | None | False | 82442.304 | 0 |
| 3525949 | 126727 | None | code05 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CSR for Buildings VOL II for the year 2023-24. I. No. 8.33.3 P.No. 47) | Sqm | 155.68 | 155.68 | 1.89 | False | None | None | False | None | False | 294.2352 | 0 |
| 3525950 | 126727 | None | code06 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CSR for Buildings VOL II for the year 2023-24. I. No. 8.33.1 P.No. 46) | Sqm | 176.96 | 176.96 | 144.84 | False | None | None | False | None | False | 25630.8864 | 0 |
| 3525951 | 126727 | None | code07 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including riming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CSR for Buildings VOL II for the year 2023-24. I. No. 8.30 P.No. 46) | Sqm | 194.88 | 194.88 | 66.98 | False | None | None | False | None | False | 13053.0624 | 0 |
| 3525952 | 126727 | None | code08 | Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2.(CSR 2023-24 Vol-II/Item10.1.2 page No 69) | Sqm | 4409.44 | 4409.44 | 1.26 | False | None | None | False | None | False | 5555.8944 | 0 |
| 3525953 | 126727 | None | code09 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.(CSR 2023-24 Vol-II/Item10.4 page No69) | Each | 661.92 | 661.92 | 2.1 | False | None | None | False | None | False | 1390.032 | 0 |
| 3525954 | 126727 | None | code10 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap( CSR V2/ Item no 14.7.2 page no 132) | Each | 2868.32 | 2868.32 | 2.0 | False | None | None | False | None | False | 5736.64 | 0 |
| 3525955 | 126727 | None | code11 | Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out,construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. (Item No1.17.1, Page No.10, V1 P.W.D.C S.R. 2023-24 ) | Cum | 293.44 | 293.44 | 6.84 | False | None | None | False | None | False | 2007.1296 | 0 |
| 3525956 | 126727 | None | code12 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The gnite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) - Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (CSR 2023-24 Vol-I/P.No.15/Item No.2.1.4) | Cum | 6963.04 | 6963.04 | 0.9 | False | None | None | False | None | False | 6266.736 | 0 |
| 3525957 | 126727 | None | code13 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications ( CSR VOL 1 for the year 2023-24 ,I No. 1.10 Page No33) | Cum | 179.2 | 179.2 | 6.84 | False | None | None | False | None | False | 1225.728 | 0 |
| 3525958 | 126727 | None | code14 | Supplying PVC ring tight pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110 mm outer dia., 6 kg/sqcm & class 3 (CSR2023-24 VOL-5, INo 10.1.7 page no 113 | Mtr | 441.28 | 441.28 | 18.0 | False | None | None | False | None | False | 7943.04 | 0 |
| 3525959 | 126727 | None | code15 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). (external work). - 40mm nominal doa pipes(PWD SR for Buildings VOL II for the year 2023-24. I. No. 13.33.5 Page no 123) | Mtr | 534.24 | 534.24 | 20.0 | False | None | None | False | None | False | 10684.8 | 0 |
| 3525960 | 126727 | None | code16 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). (external work). - 32mm nominal doa pipes(CSR for Buildings VOL II for the year 2023-24 I. No. 13.33.4 Page No 122) | Mtr | 416.64 | 416.64 | 20.0 | False | None | None | False | None | False | 8332.8 | 0 |
| 3525961 | 126727 | None | code17 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). (external work). - 25mm nominal doa pipes(CSR for Buildings VOL II for the year 2023-24 I. No. 13.33.3 Page No 122) | Mtr | 331.52 | 331.52 | 12.0 | False | None | None | False | None | False | 3978.24 | 0 |
| 3525962 | 126727 | None | code18 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). (external work). - 20mm nominal doa pipes(CSR for Buildings VOL II for the year 2023-24 I. No. 13.33.2 Page No 122) | Mtr | 243.04 | 243.04 | 12.0 | False | None | None | False | None | False | 2916.48 | 0 |
| 3525963 | 126727 | None | code19 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) (CSR for Buildings VOL II for the year 2023-24. I. No.13.4.1, P.No 117) | Each | 614.88 | 614.88 | 2.0 | False | None | None | False | None | False | 1229.76 | 0 |
| 3525964 | 126727 | None | code20 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931(CSR for Buildings VOL II for the year 2023-24 I. No.13.4.2, P.No 117) | Each | 669.76 | 669.76 | 2.0 | False | None | None | False | None | False | 1339.52 | 0 |
| 3525965 | 126727 | None | code21 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931(CSR for Buildings VOL II for the year 2022-23,I. No.13.12, P.No 119) | Each | 711.2 | 711.2 | 6.0 | False | None | None | False | None | False | 4267.2 | 0 |
| 3525966 | 126727 | None | code22 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (CSR for Buildings VOL II for the year 2023-24 I. No.14.1.1 P.No 80) | Each | 5470.08 | 5470.08 | 2.0 | False | None | None | False | None | False | 10940.16 | 0 |
| 3525967 | 126727 | None | code23 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ((PWD SR for Buildings VOL II for the year 2023-24. I. No.14.3.1.page no-123 ) | Each | 5605.6 | 5605.6 | 2.0 | False | None | None | False | None | False | 11211.2 | 0 |
| 3525968 | 126727 | None | code24 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (CSR for Buildings VOL II for the year 2023-24 I. No.20.44.2 P.No 202) | Each | 3972.64 | 3972.64 | 4.0 | False | None | None | False | None | False | 15890.56 | 0 |
| 3525969 | 126727 | None | code25 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular 450mm Dia (CSR for Buildings VOL II for the year 2023-24 I. No.14.32.1 P.No 136) | Each | 1218.56 | 1218.56 | 2.0 | False | None | None | False | None | False | 2437.12 | 0 |
| 3525970 | 126727 | None | code26 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g (CSR for Buildings VOL II for the year 2023-24 I. No.14.40.2 P.No 137) | Each | 555.52 | 555.52 | 2.0 | False | None | None | False | None | False | 1111.04 | 0 |
| 3525971 | 126727 | None | code27 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet and 75 mm outlet * Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 (CSR for Buildings VOL II for the year 2022-23Corrigendum I. No13.45,page no 124) | Each | 1171.52 | 1171.52 | 4.0 | False | None | None | False | None | False | 4686.08 | 0 |
| 3525972 | 126727 | None | code28 | Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CSR for VOL 4 for the year 2023-24 I. No16.8,page no 191) | Each | 5365.92 | 5365.92 | 3.0 | False | None | None | False | None | False | 16097.76 | 0 |
| 3525973 | 126727 | None | code29 | Rectangular cover 455x610 mm with frame (low duty) (inside)(CSR for VOL 4 for the year 2023-24 I. No707 ,page no A33 | Each | 1568.0 | 1568.0 | 4.0 | False | None | None | False | None | False | 6272.0 | 0 |
| 3525974 | 126727 | None | code30 | Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore (PWD SR for Buildings VOL II for the year 2023-24. I. No. 13.8.2.2 Page No. 116) | Each | 142.24 | 142.24 | 2.0 | False | None | None | False | None | False | 284.48 | 0 |
| 3525975 | 126727 | None | code31 | Providing and fixing 100 mm sand cast Iron grating for gully trap.For Bathrooms, Urinals, Toilet rooms and hand wash (PWD SR for Buildings VOL II for the year 2023-24.I. No. 14.29 Page No. 136) | Each | 52.64 | 52.64 | 2.0 | False | None | None | False | None | False | 105.28 | 0 |
| 3525976 | 126727 | None | code32 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 13.34 page no 123) | Ltr | 10.08 | 10.08 | 1000.0 | False | None | None | False | None | False | 10080.0 | 0 |
| 3525977 | 126727 | None | code33 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks Wall bores in Brick masonry (PWD SR for Buildings VOL II for the year 2023-24. I. No. 13.36 page no 123) | Each | 361.76 | 361.76 | 2.0 | False | None | None | False | None | False | 723.52 | 0 |
| 3525978 | 126727 | None | code34 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. ((PWD SR for Buildings VOL II for the year 2023-24. I. No. 13.37 page no 123) | Each | 350.56 | 350.56 | 2.0 | False | None | None | False | None | False | 701.12 | 0 |
| 3525979 | 126727 | None | code35 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern (PWD SR for Buildings VOL II for the year 2023-24. I. No. 14.4.1, P.no123) | Each | 4988.48 | 4988.48 | 1.0 | False | None | None | False | None | False | 4988.48 | 0 |
| 3525980 | 126727 | None | code36 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (CSR for Buildings VOL II for the year 2023-24. I. No.14.16A.page no-134) | Each | 304.64 | 304.64 | 2.0 | False | None | None | False | None | False | 609.28 | 0 |
| 3525981 | 126727 | None | code37 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.(CSR VOL I for the year 2023-24. I. No.1.4.page no-5) | Each | 256.48 | 256.48 | 26.95 | False | None | None | False | None | False | 6912.136 | 0 |
| 3525982 | 126727 | None | code38 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (Item No2.1.5, Page No.15, V1 P.W.D.C S.R. 2023-24 ) | Cum | 6894.72 | 6894.72 | 2.45 | False | None | None | False | None | False | 16892.064 | 0 |
| 3525983 | 126727 | None | code39 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers not exceeding 150 mm thickness, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates(CSR Vol-I, Item no 2.3.1,2023-24, P.No-16) | Mtr | 7789.94 | 7789.94 | 6.09 | False | None | None | False | None | False | 47440.7346 | 0 |
| 3525984 | 126727 | None | code40 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 17) | Cum | 11496.24 | 11496.24 | 1.62 | False | None | None | False | None | False | 18623.9088 | 0 |
| 3525985 | 126727 | None | code41 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, ping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Canal & Allied Works (Item No2.11.f, Page No.18, V1 P.W.D.C S.R. 2023-24 ) | t | 100811.2 | 100811.2 | 0.66 | False | None | None | False | None | False | 66535.392 | 0 |
| 3525986 | 126727 | None | code42 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(CSR VoII-Item no6.3,2023-24 page no-13) | No | 9938.88 | 9938.88 | 1.52 | False | None | None | False | None | False | 15107.0976 | 0 |
| 3525987 | 126727 | None | code43 | Filling of dry waste brick in soak pit (Lum sum) | Mtr | 3360.0 | 3360.0 | 1.3 | False | None | None | False | None | False | 4368.0 | 0 |
| 3525988 | 126727 | None | code44 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary ( CSR 2023-24 VOI 5/Page No. 2 Item No. 1.2.2 ) | Mtr | 87.36 | 87.36 | 25.0 | False | None | None | False | None | False | 2184.0 | 0 |
| 3525989 | 126727 | None | code45 | Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (Page No.3 Item No. 1.2.1) | Each | 73.92 | 73.92 | 100.0 | False | None | None | False | None | False | 7392.0 | 0 |
| 3525990 | 126727 | None | code46 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A. (Page No. 5 Item No.2.1.1) | Point | 319.2 | 319.2 | 5.0 | False | None | None | False | None | False | 1596.0 | 0 |
| 3525991 | 126727 | None | code47 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A. (Page No. 5 Item No.2.1.2) | Point | 441.28 | 441.28 | 2.0 | False | None | None | False | None | False | 882.56 | 0 |
| 3525992 | 126727 | None | code48 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A. (Page No. 5 Item No.2.1.3) | Point | 635.04 | 635.04 | 2.0 | False | None | None | False | None | False | 1270.08 | 0 |
| 3525993 | 126727 | None | code49 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A. (Page No. 6 Item No.2.3.2) | Mtr | 29.12 | 29.12 | 180.0 | False | None | None | False | None | False | 5241.6 | 0 |
| 3525994 | 126727 | None | code50 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.(Page No.5& 6 Item No.2.3.3) | Mtr | 44.8 | 44.8 | 90.0 | False | None | None | False | None | False | 4032.0 | 0 |
| 3525995 | 126727 | None | code51 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.(Page No. 9 Item No.3.5.4) | Each | 246.4 | 246.4 | 2.0 | False | None | None | False | None | False | 492.8 | 0 |
| 3525996 | 126727 | None | code52 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(Item No.3.5.5) | Each | 338.24 | 338.24 | 2.0 | False | None | None | False | None | False | 676.48 | 0 |
| 3525997 | 126727 | None | code53 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No. 9 Item No. 3.6.1) | Each | 114.24 | 114.24 | 11.0 | False | None | None | False | None | False | 1256.64 | 0 |
| 3525998 | 126727 | None | code54 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No. 9 Item No. 3.6.3) | Each | 191.52 | 191.52 | 2.0 | False | None | None | False | None | False | 383.04 | 0 |
| 3525999 | 126727 | None | code55 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. ( Item No. 3.6.9 page no 9) | Each | 365.12 | 365.12 | 2.0 | False | None | None | False | None | False | 730.24 | 0 |
| 3526000 | 126727 | None | code56 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. (Item no 5.18.6 page no 9 ) | Each | 1234.24 | 1234.24 | 1.0 | False | None | None | False | None | False | 1234.24 | 0 |
| 3526001 | 126727 | None | code57 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.( CSR V6/ Item no 12.57 page no 54) | Each | 4766.72 | 4766.72 | 1.0 | False | None | None | False | None | False | 4766.72 | 0 |
| 3526002 | 126727 | None | code58 | Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500degree K, CRI more than 70%. efficacy more than 80 lumen per W, life more than 25000burning hours and Compliance to IS 10322/IEC 60598, LM 79& LM 80. The LED are driven by HF electronic driver ntegrated in the system, with PF more than 0.95, power loss should less than 5% of lamp Wage., short circuit & open circuit protection to be integratedin the circuit, THD less than 20%, Life as per LM 79. Theoperating input voltage should be between 130 to 275 V. BISApproved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. (CSR V-6/Item11.11.3 page no 47 | Each | 166.88 | 166.88 | 11.0 | False | None | None | False | None | False | 1835.68 | 0 |
| 3526003 | 126727 | None | code59 | Supply of round/square recess/surface mounted rollingtype LED Down light with ...... W GU 10 LED Lamp RibFabricated from diecast aluminium with white powdercoated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V@50/60Hz & Power factor more than 0.9 along with CE approved. 2years Warranty against any nufacturing defect working understandard electrical condition.(CSR V-6/Item11.11.5 page no 47 | Each | 935.2 | 935.2 | 2.0 | False | None | None | False | None | False | 1870.4 | 0 |