createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1720599938661 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1500.00 emd 59800.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 23-07-2024 16:00:00 tenderQueryClose 20-07-2024 16:00:00 technicalBidOpen 24-07-2024 16:30:00 publishedDate 15-07-2024 17:33:39 publishedByPost EWHFWD_EE_EEOFF_DWD publishedByUser KPE13493 - SURESH S N bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Arunkumar H splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08362955800 mobileNumber 9448480776 tenderSupplierList None
tenderSchedule	createdTs 1720599938688 version 10 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT426 title Construction of Health and Wellness Centre at Murakibavi in Bailhongal Taluk, Belagavi District description Construction of Health and Wellness Centre at Murakibavi in Bailhongal Taluk, Belagavi District category WORKS categoryText Works ecv 5974266.22 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3524 locationName EWHFWD Executive Engineer Office Dharwad provisionalAmount 6000000.0 groupOverheadTotal 0.0 fileNumber AEE/BGM/2024-25/15thFinance/HWC
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1720599939000 0 None None Buildings Construction of Health and Wellness Centre at Murakibavi in Bailhongal Taluk, Belagavi District (Civil GF Work) 3606159.69 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3503517 125274 None Common PWD SR 23-24 V-1 pg no 8 item no 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m Cum 120.36 120.36 144.97 False None None False None False 17448.5892 0 3503518 125274 None Common PWD SR 23-24 V-1 pg no 15 item no 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 7067.02 7067.02 18.38 False None None False None False 129891.8276 0 3503519 125274 None Common PWD SR 23-24 V-1 pg no 15 item no 2.2.1 Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Including Formwork) for FOOTINGS Cum 8012.15 8012.15 14.89 False None None False None False 119300.9135 0 3503520 125274 None Common PWD SR 23-24 V-1 pg no 15 item no 2.2.1 Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Including Formwork) for PEDESTALS Cum 8160.53 8160.53 1.79 False None None False None False 14607.3487 0 3503521 125274 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Including Formwork) for COLUMNS-GROUND FLOOR Cum 13299.78 13299.78 7.14 False None None False None False 94960.4292 0 3503522 125274 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Including Formwork) for PLINTH BEAM, SLAB & STAIRCASE-GROUND FLOOR Cum 11735.1 11735.1 30.15 False None None False None False 353813.265 0 3503523 125274 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Including Formwork) for RCC BEAMS & LINTEL-GROUND ROOF Cum 12517.44 12517.44 11.59 False None None False None False 145077.1296 0 3503524 125274 None Common PWD SR 23-24 V-1 pg no 7 item no 1.9 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 313.88 313.88 180.15 False None None False None False 56545.482 0 3503525 125274 None Common PWD SR 23-24 V-1 pg no 15 item no 2.1.4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 7336.06 7336.06 3.02 False None None False None False 22154.9012 0 3503526 125274 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Including Formwork) for Chajja Cum 11343.93 11343.93 0.39 False None None False None False 4424.1327 0 3503527 125274 None Common PWD SR 23-24 V-1 pg no 18 item no 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings Tonne 105559.26 105559.26 5.61 False None None False None False 592187.4486 0 3503528 125274 None Common PWD SR 23-24 V-2 pg no 9 item no 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6620.98 6620.98 8.06 False None None False None False 53365.0988 0 3503529 125274 None Common PWD SR 23-24 V-2 pg no 13 item no 6.3 Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 10471.32 10471.32 39.87 False None None False None False 417491.5284 0 3503530 125274 None Common PWD SR 23-24 V-2 pg no 14 item no 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1218.94 1218.94 43.65 False None None False None False 53206.731 0 3503531 125274 None Common PWD SR 23-24 V-2 pg no 100 item no 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 116601.7 116601.7 0.47 False None None False None False 54802.799 0 3503532 125274 None Common PWD SR 23-24 V-2 pg no 104 item no 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m.including cost of materials, labour charges, complete as per specifications. No 1198.88 1198.88 7.0 False None None False None False 8392.16 0 3503533 125274 None Common PWD SR 23-24 V-2 pg no A-25 item no 444 Hold fasts No 59.0 59.0 36.0 False None None False None False 2124.0 0 3503534 125274 None Common PWD SR 23-24 V-2 pg no 105 item no 12.57.5 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick one side teak and one side commercial Sqm 4598.46 4598.46 17.01 False None None False None False 78219.8046 0 3503535 125274 None Common PWD SR 23-24 V-2 pg no 110 item no 12.9 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7946.12 7946.12 12.65 False None None False None False 100518.418 0 3503536 125274 None Common PWD SR 23-24 V-2 pg no 109 item no 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead freewith gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness.Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6748.42 6748.42 1.32 False None None False None False 8907.9144 0 3503537 125274 None Common PWD SR 23-24 V-2 pg no 86 item no 11.34A 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 198.24 198.24 293.27 False None None False None False 58137.8448 0 3503538 125274 None Common PWD SR 23-24 V-2 pg no 104 item no 12.54 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. m 375.24 375.24 19.8 False None None False None False 7429.752 0 3503539 125274 None Common PWD SR 23-24 V-2 pg no 104 item no 12.55.2 Solid panel prelam pvc door shutter. Providing and fixing 30mm thick factory made rigid foam Prelam panelled Door Shutters made from M.S. Tube of 19x19mm, 19 guage for styles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form styles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the styles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm. Aluminium hinges. with one side prelam Sqm 2407.2 2407.2 6.3 False None None False None False 15165.36 0 3503540 125274 None Common PWD SR 23-24 V-2 pg no 41 item no 8.4.1 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. for ceiling Sqm 323.32 323.32 85.98 False None None False None False 27799.0536 0 3503541 125274 None Common PWD SR 23-24 V-2 pg no 42 item no 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 411.82 411.82 440.24 False None None False None False 181299.6368 0 3503542 125274 None Common PWD SR 23-24 V-2 pg no 50 item no 8.51 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 118.0 118.0 526.22 False None None False None False 62093.96 0 3503543 125274 None Common PWD SR 23-24 V-2 pg no 42 item no 8.8 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing caffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Out side) Sqm 437.78 437.78 297.7 False None None False None False 130327.106 0 3503544 125274 None Common PWD SR 23-24 V-2 pg no 41 item no 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 348.1 348.1 38.41 False None None False None False 13370.521 0 3503545 125274 None Common PWD SR 23-24 V-2 pg no 149 item no 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 964.06 964.06 37.58 False None None False None False 36229.3748 0 3503546 125274 None Common PWD SR 23-24 V-2 pg no 60 item no 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm Sqm 1351.1 1351.1 87.58 False None None False None False 118329.338 0 3503547 125274 None Common PWD SR 23-24 V-2 pg no 63 item no 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 2909.88 2909.88 23.96 False None None False None False 69720.7248 0 3503548 125274 None Common PWD SR 23-24 V-2 pg no 60 item no 9.11 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1049.02 1049.02 13.06 False None None False None False 13700.2012 0 3503549 125274 None Common PWD SR 23-24 V-2 pg no 65 item no 9.38 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1642.56 1642.56 38.41 False None None False None False 63090.7296 0 3503550 125274 None Common PWD SR 23-24 V-2 pg no 64 item no 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1947.0 1947.0 5.65 False None None False None False 11000.55 0 3503551 125274 None Common PWD SR 23-24 V-2 pg no 63 item no 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 5081.08 5081.08 9.16 False None None False None False 46542.6928 0 3503552 125274 None Common PWD SR 23-24 V-2 pg no 83 item no 11.28 11.28 Providing and fixing 304 - grade stainless steel hand rails of 14-gauge pipes for Ramps or Staircase are made out of stainless steel hallow pipes, using 50mm dia for verticals @1.60 mtr c/c are fixed to the ramps or steps by drilling with bolts and 100mm dia MS base plates 10mm gauge for fixing of Vertical pipes 4 - Nos anchor bolts & 40mm dia pipes are fixed horizontally for 2-rows top, one pipes are fixed with vertical pipes another one are fixed with elbows and 25mm dia pipes are fixed horizontally for 2-rows below top measure @ equal intervals including cutting, welding, bending wherever necessary with suitable caps @ tops, bottoms & corners finishing with mat / shining etc., complete including cost and conveyance of all materials, labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work. Ramps or Staircase for physically challenged. Kg 666.7 666.7 160.0 False None None False None False 106672.0 0 3503553 125274 None Common PWD SR 23-24 V-2 pg no 48 item no 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 149.86 149.86 440.24 False None None False None False 65974.3664 0 3503554 125274 None Common PWD SR 23-24 V-2 pg no 46 item no 8.3 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in- charge. Sqm 205.32 205.32 267.93 False None None False None False 55011.3876 0 3503555 125274 None Common PWD SR 23-24 V-2 pg no 47 item no 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 59.0 59.0 13.97 False None None False None False 824.23 0 3503556 125274 None Common PWD SR 23-24 V-2 pg no 48 item no 8.4 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 135.7 135.7 13.97 False None None False None False 1895.729 0 3503557 125274 None Common PWD SR 23-24 V-2 pg no 47 item no 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 62.54 62.54 77.18 False None None False None False 4826.8372 0 3503558 125274 None Common PWD SR 23-24 V-2 pg no 105 item no 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No 279.66 279.66 26.0 False None None False None False 7271.16 0 3503559 125274 None Common PWD SR 23-24 V-2 pg no 105 item no 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete No 141.6 141.6 13.0 False None None False None False 1840.8 0 3503560 125274 None Common PWD SR 23-24 V-2 pg no 105 item no 12.6 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1241.36 1241.36 26.0 False None None False None False 32275.36 0 3503561 125274 None Common PWD SR 23-24 V-2 pg no 105 item no 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 153.4 153.4 26.0 False None None False None False 3988.4 0 3503562 125274 None Common PWD SR 23-24 V-1 pg no 9 item no 1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting Depth exceeding 1.5 m, but not exceeding 3 m Cum 501.5 501.5 8.06 False None None False None False 4042.09 0 3503563 125274 None Common PWD SR 23-24 V-1 pg no 17 item no 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 20% for Centering and Shuttering. (Including Formwork) Cum 9388.08 9388.08 6.05 False None None False None False 56797.884 0 3503564 125274 None Common PWD SR 23-24 vol-2 pg no 41 item no 8.1.2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in- charge. Sqm 284.38 284.38 6.0 False None None False None False 1706.28 0 3503565 125274 None Common PWD SR 23-24 vol-2 pg no 41 item no 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 300.9 300.9 30.0 False None None False None False 9027.0 0 3503566 125274 None Common PWD SR 23-24 vol-2 pg no 136 item no 15.6 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4- 6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 598.26 598.26 30.0 False None None False None False 17947.8 0 3503567 125274 None Common PWD SR 23-24 vol-5 pg no 221 item no 18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. No 2315.16 2315.16 2.0 False None None False None False 4630.32 0 3503568 125274 None Common PWD SR 23-24 V-2 pg no 188 item no 19.10.2 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.In cement mortar Cum 1181.18 1181.18 42.12 False None None False None False 49751.3016 0 1720599939000 0 None None Buildings Construction of Health and Wellness Centre at Murakibavi in Bailhongal Taluk, Belagavi District (Civil FF) 1768323.41 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3503569 125275 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Including Formwork) for COLUMNS-FIRST FLOOR Cum 13432.78 13432.78 4.22 False None None False None False 56686.3316 0 3503570 125275 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Including Formwork) for RCC BEAMS & LINTEL-FIRST FLOOR Cum 12642.61 12642.61 8.11 False None None False None False 102531.5671 0 3503571 125275 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Including Formwork) for RCC SLAB-FIRST FLOOR Cum 11852.45 11852.45 6.82 False None None False None False 80833.709 0 3503572 125275 None Common PWD SR 23-24 V-1 pg no 15 item no 2.1.4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 using 20 mm nominal size graded crushed coarse aggregates. Cum 7409.42 7409.42 1.03 False None None False None False 7631.7026 0 3503573 125275 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Including Formwork) for Chajja Cum 11457.37 11457.37 0.46 False None None False None False 5270.3902 0 3503574 125275 None Common PWD SR 23-24 V-1 pg no 18 item no 2.11 (a) Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings Tonne 106614.85 106614.85 1.63 False None None False None False 173782.2055 0 3503575 125275 None Common PWD SR 23-24 V-2 pg no 13 item no 6.3 Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 12356.16 12356.16 35.16 False None None False None False 434442.5856 0 3503576 125275 None Common PWD SR 23-24 V-2 pg no 14 item no 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1438.35 1438.35 42.38 False None None False None False 60957.273 0 3503577 125275 None Common PWD SR 23-24 V-2 pg no 100 item no 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 117767.72 117767.72 0.21 False None None False None False 24731.2212 0 3503578 125275 None Common PWD SR 23-24 V-2 pg no 104 item no 12.51 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1210.87 1210.87 4.0 False None None False None False 4843.48 0 3503579 125275 None Common PWD SR 23-24 V-2 pg no A-25 item no 444 Hold fasts No 59.6 59.6 24.0 False None None False None False 1430.4 0 3503580 125275 None Common PWD SR 23-24 V-2 pg no 105 item no 12.57.5 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick one side teak and one side commercial Sqm 4644.44 4644.44 9.12 False None None False None False 42357.2928 0 3503581 125275 None Common PWD SR 23-24 V-2 pg no 110 item no 12.9 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 8025.58 8025.58 10.55 False None None False None False 84669.869 0 3503582 125275 None Common PWD SR 23-24 V-2 pg no 110 item no 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6815.9 6815.9 0.72 False None None False None False 4907.448 0 3503583 125275 None Common PWD SR 23-24 V-2 pg no 86 item no 11.34A 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Kg 200.22 200.22 236.57 False None None False None False 47366.0454 0 3503584 125275 None Common PWD SR 23-24 V-2 pg no 104 item no 12.54 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. m 378.99 378.99 9.9 False None None False None False 3752.001 0 3503585 125275 None Common PWD SR 23-24 V-2 pg no 104 item no 12.55.2 Solid panel prelam pvc door shutter. Providing and fixing 30mm thick factory made rigid foam Prelam panelled Door Shutters made from M.S. Tube of 19x19mm, 19 guage for styles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form styles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the styles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm. Aluminium hinges. with one side prelam Sqm 2436.04 2436.04 3.15 False None None False None False 7673.526 0 3503586 125275 None Common PWD SR 23-24 V-2 pg no 41 item no 8.4.1 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 384.95 384.95 68.7 False None None False None False 26446.065 0 3503587 125275 None Common PWD SR 23-24 V-2 pg no 42 item no 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 415.94 415.94 240.55 False None None False None False 100054.367 0 3503588 125275 None Common PWD SR 23-24 V-2 pg no 50 item no 8.51 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 119.18 119.18 309.26 False None None False None False 36857.6068 0 3503589 125275 None Common PWD SR 23-24 V-2 pg no 42 item no 8.8 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing caffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Out side) Sqm 442.16 442.16 204.47 False None None False None False 90408.4552 0 3503590 125275 None Common PWD SR 23-24 V-2 pg no 41 item no 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 351.58 351.58 27.87 False None None False None False 9798.5346 0 3503591 125275 None Common PWD SR 23-24 V-2 pg no 149 item no 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 973.7 973.7 76.26 False None None False None False 74254.362 0 3503592 125275 None Common PWD SR 23-24 V-2 pg no 60 item no 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm Sqm 1364.61 1364.61 55.67 False None None False None False 75967.8387 0 3503593 125275 None Common PWD SR 23-24 V-2 pg no 60 item no 9.11 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1059.51 1059.51 5.98 False None None False None False 6335.8698 0 3503594 125275 None Common PWD SR 23-24 V-2 pg no 65 item no 9.38 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1658.99 1658.99 27.87 False None None False None False 46236.0513 0 3503595 125275 None Common PWD SR 23-24 V-2 pg no 65 item no 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1966.47 1966.47 5.65 False None None False None False 11110.5555 0 3503596 125275 None Common PWD SR 23-24 V-2 pg no 64 item no 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specification. Sqm 5131.9 5131.9 9.8 False None None False None False 50292.62 0 3503597 125275 None Common PWD SR 23-24 V-2 pg no 48 item no 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 151.36 151.36 240.55 False None None False None False 36409.648 0 3503598 125275 None Common PWD SR 23-24 V-2 pg no 46 item no 8.3 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in- charge. Sqm 207.37 207.37 184.02 False None None False None False 38160.2274 0 3503599 125275 None Common PWD SR 23-24 V-2 pg no 45 item no 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 337.28 337.28 21.25 False None None False None False 7167.2 0 3503600 125275 None Common PWD SR 23-24 V-2 pg no 47 item no 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 59.59 59.59 11.27 False None None False None False 671.5793 0 3503601 125275 None Common PWD SR 23-24 V-2 pg no 48 item no 8.4 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 137.06 137.06 11.27 False None None False None False 1544.6662 0 3503602 125275 None Common PWD SR 23-24 V-2 pg no 47 item no 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 63.17 63.17 21.89 False None None False None False 1382.7913 0 3503603 125275 None Common PWD SR 23-24 V-2 pg no 105 item no 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No 282.46 282.46 10.0 False None None False None False 2824.6 0 3503604 125275 None Common PWD SR 23-24 V-2 pg no 105 item no 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete No 143.02 143.02 5.0 False None None False None False 715.1 0 3503605 125275 None Common PWD SR 23-24 V-2 pg no 105 item no 12.6 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1253.78 1253.78 5.0 False None None False None False 6268.9 0 3503606 125275 None Common PWD SR 23-24 V-2 pg no 105 item no 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 154.93 154.93 10.0 False None None False None False 1549.3 0 1720599939000 0 None None Buildings Construction of Health and Wellness Centre at Murakibavi in Bailhongal Taluk, Belagavi District (Water supply work) 233651.8 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3503607 125276 None Common PWD SR 23-24 V-2 pg no 131 item no 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 7052.86 7052.86 2.0 False None None False None False 14105.72 0 3503608 125276 None Common PWD SR 23-24 V-2 pg no 131 item no 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5763.12 5763.12 2.0 False None None False None False 11526.24 0 3503609 125276 None Common PWD SR 23-24 V-2 pg no 133 item no 14.7.8 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers Each 4853.34 4853.34 2.0 False None None False None False 9706.68 0 3503610 125276 None Common PWD SR 23-24 V-2 pg no 135 item no 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Each 955.8 955.8 2.0 False None None False None False 1911.6 0 3503611 125276 None Common PWD SR 23-24 V-2 pg no 135 item no 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. Each 6563.16 6563.16 2.0 False None None False None False 13126.32 0 3503612 125276 None CommonPWD SR 23-24 V-2 pg no 133 item no 14.10.1.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 225 mm Each 6363.74 6363.74 1.0 False None None False None False 6363.74 0 3503613 125276 None Common PWD SR 23-24 V-2 pg no 136 item no 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 55.46 55.46 7.0 False None None False None False 388.22 0 3503614 125276 None Common PWD SR 23-24 V-2 pg no 127 item no 13.59 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Each 259.6 259.6 5.0 False None None False None False 1298.0 0 3503615 125276 None Common PWD SR 23-24 V-2 pg no 137 item no 14.36.2 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g Each 109.74 109.74 5.0 False None None False None False 548.7 0 3503616 125276 None Common PWD SR 23-24 V-2 pg no 137 item no 14.40.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour:450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. Each 564.04 564.04 2.0 False None None False None False 1128.08 0 3503617 125276 None Common PWD SR 23-24 V-2 pg no 121 item no 13.25 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms No 172.28 172.28 2.0 False None None False None False 344.56 0 3503618 125276 None Common PWD SR 23-24 V-5 pg no 113 item no 10.1.5 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: 75 mm dia, 6 kg/sqcm & class 3 m 259.6 259.6 15.0 False None None False None False 3894.0 0 3503619 125276 None Common PWD SR 23-24 V-5 pg no 113 item no 10.1.6 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: 90 mm dia,6 kg/sqcm & class 3 m 346.92 346.92 10.0 False None None False None False 3469.2 0 3503620 125276 None Common PWD SR 23-24 V-5 pg no 113 item no 10.1.7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: 110mm dia,6 kg/sqcm & class 3 m 484.98 484.98 8.0 False None None False None False 3879.84 0 3503621 125276 None Common PWD SR 23-24 V-5 pg no 113 item no 10.1.8 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: 140mm dia,6 kg/sqcm & class 3 m 689.12 689.12 18.0 False None None False None False 12404.16 0 3503622 125276 None Common PWD SR 23-24 V-2 pg no 122 item no 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm dia m 364.62 364.62 20.0 False None None False None False 7292.4 0 3503623 125276 None Common PWD SR 23-24 V-2 pg no 122 item no 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20mm dia m 447.22 447.22 15.0 False None None False None False 6708.3 0 3503624 125276 None Common PWD SR 23-24 V-2 pg no 122 item no 13.33.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 15 mm dia m 195.88 195.88 35.0 False None None False None False 6855.8 0 3503625 125276 None Common PWD SR 23-24 V-2 pg no 122 item no 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 25 mm dia m 349.28 349.28 30.0 False None None False None False 10478.4 0 3503626 125276 None Common PWD SR 23-24 V-2 pg no 123 item no 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work.40 mm dia m 562.86 562.86 20.0 False None None False None False 11257.2 0 3503627 125276 None Common PWD SR 23-24 V-2 pg no 125 item no 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter m 343.38 343.38 40.0 False None None False None False 13735.2 0 3503628 125276 None Common PWD SR 23-24 V-2 pg no 120 item no 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. l 10.62 10.62 4500.0 False None None False None False 47790.0 0 3503629 125276 None Common PWD SR 23-24 V-5 pg no 191 item no 16.9 Constructing brick masonry chamber of internal dimension 600x600mmand depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. Each 6435.72 6435.72 3.0 False None None False None False 19307.16 0 3503630 125276 None Common PWD SR 23-24 V-2 pg no A-16 item no 166 C.P. Brass stop cock (concealed) 15 mm No 619.5 619.5 12.0 False None None False None False 7434.0 0 3503631 125276 None Common PWD SR 23-24 V-2 pg no A-15 item no 109 Brass full way valve with C.I. wheel (screwed end) 25 mm dia No 442.5 442.5 2.0 False None None False None False 885.0 0 3503632 125276 None Common PWD SR 23-24 V-2 pg no 116 item no 13.2.1 Brass bib-cock 15 mm dia Each 337.48 337.48 3.0 False None None False None False 1012.44 0 3503633 125276 None CommonPWD SR 23-24 V-2 pg no 136 item no 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines 40mm dia pipes, From wash basin waste lines m 108.56 108.56 15.0 False None None False None False 1628.4 0 3503634 125276 None Common PWD SR 23-24 V-2 pg no 121 item no 13.23.5 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 g No 1585.92 1585.92 2.0 False None None False None False 3171.84 0 3503635 125276 None Common PWD SR 23-24 V-5 pg no 149 item no 13.4.1 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc complete,. 0.50 HP/0.37kW - 5 STG stage Each 12000.6 12000.6 1.0 False None None False None False 12000.6 0 1720599939000 0 None None Buildings Construction of Health and Wellness Centre at Murakibavi in Bailhongal Taluk, Belagavi District (Electrical work) 366131.32 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3503636 125277 None Common PWD SR 23-24 V-6 pg no 5 item no 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch Point 317.42 317.42 18.0 False None None False None False 5713.56 0 3503637 125277 None Common PWD SR 23-24 V-6 pg no 5 item no 2.2.2 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch Point 447.22 447.22 30.0 False None None False None False 13416.6 0 3503638 125277 None Common PWD SR 23-24 V-6 pg no 5 item no 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch Point 654.9 654.9 15.0 False None None False None False 9823.5 0 3503639 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-2Way Each 162.84 162.84 6.0 False None None False None False 977.04 0 3503640 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 3 way Each 187.62 187.62 2.0 False None None False None False 375.24 0 3503641 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5Way Each 208.86 208.86 2.0 False None None False None False 417.72 0 3503642 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6Way Each 259.6 259.6 10.0 False None None False None False 2596.0 0 3503643 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 Way Each 307.98 307.98 6.0 False None None False None False 1847.88 0 3503644 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12Way Each 376.42 376.42 2.0 False None None False None False 752.84 0 3503645 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1-2 Module Each 161.66 161.66 6.0 False None None False None False 969.96 0 3503646 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.3 Module Each 189.98 189.98 2.0 False None None False None False 379.96 0 3503647 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4Module Each 206.5 206.5 2.0 False None None False None False 413.0 0 3503648 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6Module Each 276.12 276.12 10.0 False None None False None False 2761.2 0 3503649 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 335.12 335.12 6.0 False None None False None False 2010.72 0 3503650 125277 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.10-12Module Each 405.92 405.92 2.0 False None None False None False 811.84 0 3503651 125277 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch Each 120.36 120.36 50.0 False None None False None False 6018.0 0 3503652 125277 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps Two way Switch Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3503653 125277 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps 3way socket Each 201.78 201.78 10.0 False None None False None False 2017.8 0 3503654 125277 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push Each 208.86 208.86 2.0 False None None False None False 417.72 0 3503655 125277 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3503656 125277 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each 384.68 384.68 6.0 False None None False None False 2308.08 0 3503657 125277 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Each 278.48 278.48 6.0 False None None False None False 1670.88 0 3503658 125277 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TV/Telephone socket Each 184.08 184.08 2.0 False None None False None False 368.16 0 3503659 125277 None Common PWD SR 23-24 V-6 pg no 48 item no 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell Each 290.28 290.28 1.0 False None None False None False 290.28 0 3503660 125277 None Common PWD SR 23-24 V-6 pg no 4 item no 1.13 Supplying and Fixing Metal Fan Box with Round Hook. Each 138.06 138.06 12.0 False None None False None False 1656.72 0 3503661 125277 None Common PWD SR 23-24 V-6 pg no 2 item no 1.2.1 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2). 19/20mm dia 2mm thick m 77.88 77.88 165.0 False None None False None False 12850.2 0 3503662 125277 None Common PWD SR 23-24 V-6 pg no 2 item no 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2).25mm dia 2mm thick m 92.04 92.04 120.0 False None None False None False 11044.8 0 3503663 125277 None Common PWD SR 23-24 V-6 pg no 2 item no 1.3.1 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.19/20mm dia 2mm thick m 80.24 80.24 165.0 False None None False None False 13239.6 0 3503664 125277 None Common PWD SR 23-24 V-6 pg no 2 item no 1.3.2 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.25mm dia 2mm thick m 93.22 93.22 120.0 False None None False None False 11186.4 0 3503665 125277 None Common PWD SR 23-24 V-6 pg no 5 item no 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latestamendments.1.5 sqmm m 30.68 30.68 350.0 False None None False None False 10738.0 0 3503666 125277 None Common PWD SR 23-24 V-6 pg no 5 item no 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latestamendments. 2.5 sqmm m 49.56 49.56 450.0 False None None False None False 22302.0 0 3503667 125277 None Common PWD SR 23-24 V-6 pg no 5 item no 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latestamendments. 4 sqmm m 74.34 74.34 190.0 False None None False None False 14124.6 0 3503668 125277 None Common PWD SR 23-24 V-6 pg no 18 item no 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure.II - Double Door12 Way SP & N Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3503669 125277 None Common PWD SR 23-24 V-6 pg no 17 item no 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32Amps SP Each 489.7 489.7 12.0 False None None False None False 5876.4 0 3503670 125277 None Common PWD SR 23-24 V-6 pg no 18 item no 5.20.1 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board. Board. 16-25 Amps 2 pole Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3503671 125277 None Common PWD SR 23-24 V-6 pg no 43 item no 11.3.2 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4'- 20/22 w Each 814.2 814.2 15.0 False None None False None False 12213.0 0 3503672 125277 None Common PWD SR 23-24 V-6 pg no 47 item no 11.11.3 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K Each 175.82 175.82 4.0 False None None False None False 703.28 0 3503673 125277 None Common PWD SR 23-24 V-6 pg no 47 item no 11.11.7 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.18 W, 6500K Each 502.68 502.68 6.0 False None None False None False 3016.08 0 3503674 125277 None Common PWD SR 23-24 V-6 pg no 50 item no 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply No 61.36 61.36 2.0 False None None False None False 122.72 0 3503675 125277 None Common PWD SR 23-24 V-6 pg no 30 item no 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 1760.56 1760.56 4.0 False None None False None False 7042.24 0 3503676 125277 None Common PWD SR 23-24 V-6 pg no 30 item no 6.3.1 Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3503677 125277 None Common PWD SR 23-24 V-6 pg no 52 item no 12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin Each 74.34 74.34 22.0 False None None False None False 1635.48 0 3503678 125277 None Common PWD SR 23-24 V-6 pg no 56 item no 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3503679 125277 None Common PWD SR 23-24 V-6 pg no 57 item no 13.11 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 371.7 371.7 12.0 False None None False None False 4460.4 0 3503680 125277 None Common PWD SR 23-24 V-6 pg no 57 item no 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 834.26 834.26 3.0 False None None False None False 2502.78 0 3503681 125277 None Common PWD SR 23-24 V-6 pg no 56 item no 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3503682 125277 None Common PWD SR 23-24 V-6 pg no 13 item no 32.07 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 3.5 core 25 sqmm ( 12 GI Strips -4 X 0.8 mm) Km 164667.82 164667.82 0.065 False None None False None False 10703.4083 0 3503683 125277 None Common PWD SR 23-24 V-6 pg no 52 item no 21.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff Km 24645.48 24645.48 0.065 False None None False None False 1601.9562 0 3503684 125277 None 19-20 SR item no 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 19-20 SR Each 143.96 143.96 10.0 False None None False None False 1439.6 0 3503685 125277 None 19-20 SR item no 6.17.5 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes .10 sqmm Each 9.44 9.44 8.0 False None None False None False 75.52 0 3503686 125277 None 21-22 SR BSR item no 29.03 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 Mtr wherever necessary as directed-In ordinary soil cm 306.8 306.8 30.0 False None None False None False 9204.0 0 3503687 125277 None Common PWD SR 23-24 V-6 pg no 20 item no 5.42.1 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.14SWG Sq CM 0.59 0.59 60000.0 False None None False None False 35400.0 0 3503688 125277 None Common PWD SR 23-24 V-6 pg no 20 item no 5.40.3 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolici FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.400 A 4 x 50 x 10 mm Aluminium Strips m 5245.1 5245.1 1.5 False None None False None False 7867.65 0 3503689 125277 None Common PWD SR 23-24 V-6 pg no 20 item no 5.41.3 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint.75x75x6mm m 654.9 654.9 5.0 False None None False None False 3274.5 0 3503690 125277 None Common PWD SR 23-24 V-6 pg no 56 item no 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 191.16 191.16 2.0 False None None False None False 382.32 0 3503691 125277 None Common PWD SR 23-24 V-6 pg no 20 item no 5.40.1 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips m 2908.7 2908.7 2.0 False None None False None False 5817.4 0 3503692 125277 None Common PWD SR 23-24 V-6 pg no 20 item no 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel m 892.08 892.08 2.0 False None None False None False 1784.16 0 3503693 125277 None Common PWD SR 23-24 V-6 pg no 17 item no 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3503694 125277 None Common PWD SR 23-24 V-6 pg no 18 item no 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3503695 125277 None Common PWD SR 23-24 V-6 pg no 14 item no 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32Amps Each 284.38 284.38 3.0 False None None False None False 853.14 0 3503696 125277 None Common PWD SR 23-24 V-6 pg no 14 item no 5.7.3 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 63Amps Each 473.18 473.18 1.0 False None None False None False 473.18 0 3503697 125277 None Common PWD SR 23-24 V-6 pg no 15 item no 5.12.1 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)63Amps Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3503698 125277 None Common PWD SR 23-24 V-6 pg no 19 item no 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter Each 236.0 236.0 1.0 False None None False None False 236.0 0 3503699 125277 None Common PWD SR 23-24 V-6 pg no 19 item no 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter Each 188.8 188.8 1.0 False None None False None False 188.8 0 3503700 125277 None Common PWD SR 23-24 V-6 pg no 19 item no 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3503701 125277 None Common PWD SR 23-24 V-6 pg no 19 item no 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C Each 607.7 607.7 2.0 False None None False None False 1215.4 0 3503702 125277 None Common PWD SR 23-24 V-6 pg no 19 item no 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound (48/6.32) Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3503703 125277 None Common PWD SR 23-24 V-6 pg no 19 item no 5.3 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter Each 1628.4 1628.4 2.0 False None None False None False 3256.8 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1720599939000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1720599939000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1720599939000 1 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Tribe as prescribed in the tender document. None 1720599939000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1720599939000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1720599990000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end None 1720600001000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1720600011000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs None 1720600032000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1720600045000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1720600056000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time None 1720600065000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1720600083000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1720600095000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1720600106000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid None 1720600114000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1720600123000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM ( Monday to Saturday) Ph No: 91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time. None 1720600132000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1720600141000 0 None None ELIGIBILITY Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work. None 1720600149000 0 None None ELIGIBILITY Tenderer should have latest GST Registration and latest clearance certificate in their name None 1720600157000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be inclusive of GST None 1720600166000 0 None None ELIGIBILITY Special Instructions to tenderers - as per bid document. None 1720600178000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work. None 1720600188000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2019-20, 2020-21 2021-22, 2022-23 & 2023-24. None 1720600196000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive. None 1720600206000 0 None None ELIGIBILITY The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b)(c)(d)and (e). None 1720600215000 0 None None ELIGIBILITY As per GO No:FD-CAM/16/2022 (P-2) dated 22nd August 2022 , Banker Certificate / Line of credit shall be uploaded in the format mentioned in the SECTION -11 as per bid document None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Clause ITT 3.2(a): To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been achieved in at least one financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs. 59.74 Lakhs. Note : a) For Clause 3.2 (a) the certificate duly certified by the charted accountant is to be submitted Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been Satisfactorily completed at least any construction work of value not less than Rs. 14.95 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs. 1.80 Lakhs in any one year (2019-20 to 2023-24) .Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d). The letter of willingness of the sub contractor to be engaged for electrical works should be obtained and uploaded in the e-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs. 1.15 Lakhs in any one year (2019-20 to 2023-24). Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e). The letter of willingness of the sub contractor to be engaged for water Supply works should be obtained and uploaded in the e-portal Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24). Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1. PCC/RCC 91.00 Cum. 2. TMT Steel 5.80 T, 3. Painting 1040.00 Sqm, 4. Flooring 173.00 Sqm 5. Plastering 1040.00 Sqm .Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (c) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None KPWD Class-III Registration Certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- KPWD Class-III & above Registration certificate None None None None Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs. 18.00 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid PWD Class III and above Registration Certificate True Technical Bid ST Reserved Category Certificate True Technical Bid GST Registration True Technical Bid Work done certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None