createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1720680484457 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1250.00 emd 50000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 23-07-2024 16:00:00 tenderQueryClose 20-07-2024 16:00:00 technicalBidOpen 24-07-2024 16:30:00 publishedDate 15-07-2024 17:32:54 publishedByPost EWHFWD_EE_EEOFF_DWD publishedByUser KPE13493 - SURESH S N bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Arunkumar H splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08362955800 mobileNumber 9448480776 tenderSupplierList None
tenderSchedule	createdTs 1720680484487 version 4 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT445 title Construction of Block level Public Health Unit at TLH Gokak in Belagavi District. description Construction of Block level Public Health Unit at TLH Gokak in Belagavi District. category WORKS categoryText Works ecv 4998547.77 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3524 locationName EWHFWD Executive Engineer Office Dharwad provisionalAmount 5000000.0 groupOverheadTotal 0.0 fileNumber AEE/BGM/2024-25/15thfin/BPHU/GOKAK
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1720680484000 0 None None Buildings Construction of Block level Public Health Unit at TLH Gokak in Belagavi District.(CIVIL GF) 2693615.3 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3506273 125457 None Common PWD SR 23-24 V-3 pg no 7 item no 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle 100 Sqm 463.74 463.74 1.75 False None None False None False 811.545 0 3506274 125457 None Common PWD SR 23-24 V-1 pg no 8 item no 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 112.1 112.1 34.99 False None None False None False 3922.379 0 3506275 125457 None Common PWD SR 23-24 V-1 pg no 8 item no 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 120.36 120.36 67.88 False None None False None False 8170.0368 0 3506276 125457 None Common PWD SR 23-24 V-1 pg no 8 item no 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth Cum 428.34 428.34 14.0 False None None False None False 5996.76 0 3506277 125457 None Common PWD SR 23-24 V-3 pg no 5 item no 1.1 A Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) Cum 159.3 159.3 114.0 False None None False None False 18160.2 0 3506278 125457 None Common PWD SR 23-24 V-2 pg no 5 item no 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications Sqm 139.24 139.24 102.18 False None None False None False 14227.5432 0 3506279 125457 None Common PWD SR 23-24 V-1 pg no 7 item no 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 313.88 313.88 37.49 False None None False None False 11767.3612 0 3506280 125457 None Common PWD SR 23-24 V-1 pg no 7 item no 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 559.32 559.32 17.21 False None None False None False 9625.8972 0 3506281 125457 None Common PWD SR 23-24 V-1 pg no 15 item no 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 7067.02 7067.02 29.44 False None None False None False 208053.0688 0 3506282 125457 None Common PWD SR 23-24 V-1 pg no 15 item no 2.2.1 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Including formwork) for FOOTINGS Cum 8012.15 8012.15 6.91 False None None False None False 55363.9565 0 3506283 125457 None Common PWD SR 23-24 V-1 pg no 15 item no 2.2.1 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Including formwork) for PEDESTALS Cum 8160.53 8160.53 1.2 False None None False None False 9792.636 0 3506284 125457 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Including formwork) for COLUMNS-GROUND FLOOR Cum 13299.78 13299.78 4.42 False None None False None False 58785.0276 0 3506285 125457 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Including formwork) for PLINTH BEAM, SLAB & STAIRCASE Cum 11735.1 11735.1 20.73 False None None False None False 243268.623 0 3506286 125457 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Including formwork) for LINTELS & BEAM-GROUND FLOOR Cum 12517.44 12517.44 11.21 False None None False None False 140320.5024 0 3506287 125457 None Common PWD SR 23-24 V-3 pg no 135 item no 15.4 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy No 240.72 240.72 8.0 False None None False None False 1925.76 0 3506288 125457 None Common PWD SR 23-24 V-1 pg no 18 item no 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 105559.26 105559.26 3.73 False None None False None False 393736.0398 0 3506289 125457 None Common PWD SR 23-24 18-19 SR pg no 15 item no 4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS m 38.94 38.94 30.6 False None None False None False 1191.564 0 3506290 125457 None Common PWD SR 23-24 pg no Data Rate item no Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. m 86.14 86.14 50.1 False None None False None False 4315.614 0 3506291 125457 None Common PWD SR 23-24 V-2 pg no 13 item no 6.3 Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 10471.32 10471.32 25.59 False None None False None False 267961.0788 0 3506292 125457 None Common PWD SR 23-24 V-2 pg no 14 item no 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1218.94 1218.94 42.65 False None None False None False 51987.791 0 3506293 125457 None Common PWD SR 23-24 V-2 pg no 100 item no 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 117781.7 117781.7 0.84 False None None False None False 98936.628 0 3506294 125457 None Common PWD SR 23-24 V-2 pg no 104 item no 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1198.88 1198.88 11.0 False None None False None False 13187.68 0 3506295 125457 None Common PWD SR 23-24 V-2 pg no 105 item no 12.6 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1241.36 1241.36 11.0 False None None False None False 13654.96 0 3506296 125457 None Common PWD SR 23-24 V-2 pg no 105 item no 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. No 1168.2 1168.2 11.0 False None None False None False 12850.2 0 3506297 125457 None Common PWD SR 23-24 V-2 pg no 105 item no 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 153.4 153.4 2.0 False None None False None False 306.8 0 3506298 125457 None Common PWD SR 23-24 V-2 pg no 105 item no 12.64 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms No 64.9 64.9 11.0 False None None False None False 713.9 0 3506299 125457 None Common PWD SR 23-24 V-2 pg no 107 item no 12.75.1 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) No 324.5 324.5 36.0 False None None False None False 11682.0 0 3506300 125457 None Common PWD SR 23-24 V-2 pg no 105 item no 12.57.3 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial Sqm 3545.9 3545.9 21.84 False None None False None False 77442.456 0 3506301 125457 None Common PWD SR 23-24 V-2 pg no 108 item no 12.84 PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 5927.14 5927.14 11.52 False None None False None False 68280.6528 0 3506302 125457 None Common PWD SR 23-24 V-2 pg no 109 item no 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6748.42 6748.42 1.62 False None None False None False 10932.4404 0 3506303 125457 None Common PWD SR 23-24 V-2 pg no 86 item no 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kg 215.94 215.94 411.62 False None None False None False 88885.2228 0 3506304 125457 None Common PWD SR 23-24 V-2 pg no 112 item no 12.96 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame m 758.74 758.74 9.9 False None None False None False 7511.526 0 3506305 125457 None Common PWD SR 23-24 V-2 pg no 112 item no 12.97.1 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. 30 mm thickness Sqm 3780.72 3780.72 3.15 False None None False None False 11909.268 0 3506306 125457 None Common PWD SR 23-24 V-2 pg no 105 item no 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. No 1314.52 1314.52 9.0 False None None False None False 11830.68 0 3506307 125457 None Common PWD SR 23-24 V-2 pg no 43 item no 8.1 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( Inside) Sqm 248.98 248.98 102.18 False None None False None False 25440.7764 0 3506308 125457 None Common PWD SR 23-24 V-2 pg no 42 item no 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 431.88 431.88 243.76 False None None False None False 105275.0688 0 3506309 125457 None Common PWD SR 23-24 V-2 pg no 50 item no 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 118.0 118.0 351.64 False None None False None False 41493.52 0 3506310 125457 None Common PWD SR 23-24 V-2 pg no 42 item no 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( Outside) Sqm 437.78 437.78 119.67 False None None False None False 52389.1326 0 3506311 125457 None Common PWD SR 23-24 V-2 pg no 43 item no 8.16.2 Providing and fixing suitable plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster mesh 150mm wide m 44.84 44.84 255.6 False None None False None False 11461.104 0 3506312 125457 None Common PWD SR 23-24 V-2 pg no 54 item no 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 61.36 61.36 290.0 False None None False None False 17794.4 0 3506313 125457 None Common PWD SR 23-24 V-2 pg no 61 item no 9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm Sqm 1386.5 1386.5 72.62 False None None False None False 100687.63 0 3506314 125457 None Common PWD SR 23-24 V-2 pg no 41 item no 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 348.1 348.1 133.03 False None None False None False 46307.743 0 3506315 125457 None Common PWD SR 23-24 V-2 pg no 63 item no 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 2909.88 2909.88 44.27 False None None False None False 128820.3876 0 3506316 125457 None Common PWD SR 23-24 V-2 pg no 64 item no 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications Sqm 1947.0 1947.0 21.92 False None None False None False 42678.24 0 3506317 125457 None Common PWD SR 23-24 V-2 pg no 150 item no 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) Sqm 725.7 725.7 3.12 False None None False None False 2264.184 0 3506318 125457 None Common PWD SR 23-24 V-2 pg no 60 item no 9.11 roviding and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1049.02 1049.02 3.12 False None None False None False 3272.9424 0 3506319 125457 None Common PWD SR 23-24 V-2 pg no 65 item no 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1709.82 1709.82 36.29 False None None False None False 62049.3678 0 3506320 125457 None Common PWD SR 23-24 V-2 pg no 84 item no 11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 162.84 162.84 170.4 False None None False None False 27747.936 0 3506321 125457 None Common PWD SR 23-24 V-2 pg no 48 item no 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 149.86 149.86 351.64 False None None False None False 52696.7704 0 3506322 125457 None Common PWD SR 23-24 V-2 pg no 46 item no 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 Sqm. Over and including priming coat of exterior primer applied @ 0.90 L/10 Sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 184.08 184.08 119.67 False None None False None False 22028.8536 0 3506323 125457 None Common PWD SR 23-24 V-2 pg no 47 item no 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 59.0 59.0 13.14 False None None False None False 775.26 0 3506324 125457 None Common PWD SR 23-24 V-2 pg no 48 item no 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 135.7 135.7 13.14 False None None False None False 1783.098 0 3506325 125457 None Common PWD SR 23-24 V-2 pg no 47 item no 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 62.54 62.54 56.2 False None None False None False 3514.748 0 3506326 125457 None Common PWD SR 23-24 V-2 pg no 48 item no 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 135.7 135.7 56.2 False None None False None False 7626.34 0 1720680485000 0 None None Buildings Construction of Block level Public Health Unit at TLH Gokak in Belagavi District.(CIVIL FF) 1445518.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3506327 125458 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Including formwork) for COLUMNS-FIRST FLOOR Cum 13432.78 13432.78 3.78 False None None False None False 50775.9084 0 3506328 125458 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Including formwork) for Lintel beam & RCC BEAM FF Cum 12642.61 12642.61 8.36 False None None False None False 105692.2196 0 3506329 125458 None Common PWD SR 23-24 V-1 pg no 16 item no 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Including formwork) for RCC SLAB FF Cum 11852.45 11852.45 8.13 False None None False None False 96360.4185 0 3506330 125458 None Common PWD SR 23-24 V-1 pg no 15 item no 2.1.4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 7409.42 7409.42 1.72 False None None False None False 12744.2024 0 3506331 125458 None Common PWD SR 23-24 V-3 pg no 135 item no 15.4 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy No 243.13 243.13 5.0 False None None False None False 1215.65 0 3506332 125458 None Common PWD SR 23-24 V-1 pg no 18 item no 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 106614.85 106614.85 1.66 False None None False None False 176980.651 0 3506333 125458 None 15 pg no 18-19 SR item no 4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS m 38.94 38.94 25.52 False None None False None False 993.7488 0 3506334 125458 None Data Rate Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. m 86.14 86.14 39.64 False None None False None False 3414.5896 0 3506335 125458 None Common PWD SR 23-24 V-2 pg no 13 item no 6.3 Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 10576.03 10576.03 25.32 False None None False None False 267785.0796 0 3506336 125458 None Common PWD SR 23-24 V-2 pg no 14 item no 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1231.13 1231.13 20.18 False None None False None False 24844.2034 0 3506337 125458 None Common PWD SR 23-24 V-2 pg no 100 item no 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 118959.52 118959.52 0.024 False None None False None False 2855.02848 0 3506338 125458 None Common PWD SR 23-24 V-2 pg no 104 item no 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1210.87 1210.87 2.0 False None None False None False 2421.74 0 3506339 125458 None Common PWD SR 23-24 V-2 pg no 105 item no 12.6 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1253.77 1253.77 2.0 False None None False None False 2507.54 0 3506340 125458 None Common PWD SR 23-24 V-2 pg no 105 item no 12.64 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms No 65.55 65.55 2.0 False None None False None False 131.1 0 3506341 125458 None Common PWD SR 23-24 V-2 pg no 107 item no 12.75.1 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) No 327.75 327.75 4.0 False None None False None False 1311.0 0 3506342 125458 None Common PWD SR 23-24 V-2 pg no 105 item no 12.57.3 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial Sqm 3581.36 3581.36 5.04 False None None False None False 18050.0544 0 3506343 125458 None Common PWD SR 23-24 V-2 pg no 108 item no 12.84 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 5986.41 5986.41 11.52 False None None False None False 68963.4432 0 3506344 125458 None Common PWD SR 23-24 V-2 pg no 109 item no 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6815.9 6815.9 1.08 False None None False None False 7361.172 0 3506345 125458 None Common PWD SR 23-24 V-2 pg no 86 item no 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kg 218.1 218.1 265.2 False None None False None False 57840.12 0 3506346 125458 None Common PWD SR 23-24 V-2 pg no 112 item no 12.96 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame. m 766.33 766.33 9.9 False None None False None False 7586.667 0 3506347 125458 None Common PWD SR 23-24 V-2 pg no 112 item no 12.97.1 Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames Sqm 3818.53 3818.53 3.15 False None None False None False 12028.3695 0 3506348 125458 None Common PWD SR 23-24 V-2 pg no 105 item no 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. No 1327.67 1327.67 2.0 False None None False None False 2655.34 0 3506349 125458 None Common PWD SR 23-24 V-2 pg no 43 item no 8.1 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( Inside) Sqm 251.47 251.47 66.29 False None None False None False 16669.9463 0 3506350 125458 None Common PWD SR 23-24 V-2 pg no 42 item no 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 436.2 436.2 151.2 False None None False None False 65953.44 0 3506351 125458 None Common PWD SR 23-24 V-2 pg no 50 item no 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 119.18 119.18 234.94 False None None False None False 28000.1492 0 3506352 125458 None Common PWD SR 23-24 V-2 pg no 42 item no 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( Outside) Sqm 442.16 442.16 162.34 False None None False None False 71780.2544 0 3506353 125458 None Common PWD SR 23-24 V-2 pg no 43 item no 8.16.2 Providing and fixing suitable plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster mesh 150mm wide m 45.29 45.29 196.0 False None None False None False 8876.84 0 3506354 125458 None Common PWD SR 23-24 V-2 pg no 54 item no 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 61.97 61.97 279.48 False None None False None False 17319.3756 0 3506355 125458 None Common PWD SR 23-24 V-2 pg no 61 item no 9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm Sqm 1400.37 1400.37 53.4 False None None False None False 74779.758 0 3506356 125458 None Common PWD SR 23-24 V-2 pg no 41 item no 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 351.58 351.58 151.2 False None None False None False 53158.896 0 3506357 125458 None Common PWD SR 23-24 V-2 pg no 150 item no 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) Sqm 732.96 732.96 3.12 False None None False None False 2286.8352 0 3506358 125458 None Common PWD SR 23-24 V-2 pg no 60 item no 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. Sqm 1059.51 1059.51 8.15 False None None False None False 8635.0065 0 3506359 125458 None Common PWD SR 23-24 V-2 pg no 65 item no 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1726.92 1726.92 11.45 False None None False None False 19773.234 0 3506360 125458 None Common PWD SR 23-24 V-2 pg no 48 item no 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 151.36 151.36 234.94 False None None False None False 35560.5184 0 3506361 125458 None Common PWD SR 23-24 V-2 pg no 46 item no 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 Sqm. Over and including priming coat of exterior primer applied @ 0.90 L/10 Sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 185.92 185.92 162.34 False None None False None False 30182.2528 0 3506362 125458 None Common PWD SR 23-24 V-2 pg no 47 item no 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 59.59 59.59 12.6 False None None False None False 750.834 0 3506363 125458 None Common PWD SR 23-24 V-2 pg no 48 item no 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 137.06 137.06 12.6 False None None False None False 1726.956 0 3506364 125458 None Common PWD SR 23-24 V-2 pg no 47 item no 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 63.17 63.17 5.04 False None None False None False 318.3768 0 3506365 125458 None Common PWD SR 23-24 V-2 pg no 48 item no 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work afterthoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 137.06 137.06 5.04 False None None False None False 690.7824 0 3506366 125458 None Common PWD SR 23-24 V-2 pg no 148 item no 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 973.7 973.7 86.82 False None None False None False 84536.634 0 1720680485000 0 None None Buildings Construction of Block level Public Health Unit at TLH Gokak in Belagavi District.(Water Supply) 300312.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3506367 125459 None CommonPWD SR 23-24 V-2 pg no 136 item no 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines Each 108.56 108.56 4.0 False None None False None False 434.24 0 3506368 125459 None Common PWD SR 23-24 V-5 pg no 191 item no 16.7.4 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with: 50mm nominal bore pipes, From Sink & Urinal lines m 164.02 164.02 10.0 False None None False None False 1640.2 0 3506369 125459 None Common PWD SR 23-24 V-5 pg no A-44 item no 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines m 145.14 145.14 40.0 False None None False None False 5805.6 0 3506370 125459 None Common PWD SR 23-24 V-5 pg no A-44 item no 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines m 300.9 300.9 35.0 False None None False None False 10531.5 0 3506371 125459 None Common PWD SR 23-24 V-2 pg no 125 item no 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter m 232.46 232.46 20.0 False None None False None False 4649.2 0 3506372 125459 None 2018-19 pg no 268 item no 37.28.1 Drilling holes of 2.50 cms dia (roof/chajja/stone).in slabs upto 7.50 cms thick No 154.58 154.58 5.0 False None None False None False 772.9 0 3506373 125459 None 2018-19 pg no 268 item no 37.28.2 Drilling holes of 2.50 cms dia (roof/chajja/stone). in slabs upto 10 cms thick No 185.26 185.26 5.0 False None None False None False 926.3 0 3506374 125459 None Common PWD SR 23-24 V-2 pg no 136 item no 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. No 1439.6 1439.6 2.0 False None None False None False 2879.2 0 3506375 125459 None Common PWD SR 23-24 V-2 pg no 138 item no 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting,of flushing Capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Each 13244.32 13244.32 2.0 False None None False None False 26488.64 0 3506376 125459 None Common PWD SR 23-24 V-2 pg no 134 item no 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm Each 5996.76 5996.76 7.0 False None None False None False 41977.32 0 3506377 125459 None Common PWD SR 23-24 V-2 pg no A-16 item no 166 C.P. Brass stop cock (concealed) 15 mm Each 619.5 619.5 4.0 False None None False None False 2478.0 0 3506378 125459 None Common PWD SR 23-24 V-2 pg no 132 item no 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Each 3636.76 3636.76 4.0 False None None False None False 14547.04 0 3506379 125459 None Common PWD SR 23-24 V-2 pg no 122 item no 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes m 364.62 364.62 10.0 False None None False None False 3646.2 0 3506380 125459 None Common PWD SR 23-24 V-2 pg no 122 item no 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes m 447.22 447.22 55.0 False None None False None False 24597.1 0 3506381 125459 None Common PWD SR 23-24 pg no 122 item no 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace. 20 mm nominal dia Pipes m 256.06 256.06 22.0 False None None False None False 5633.32 0 3506382 125459 None Common PWD SR 23-24 pg no 122 item no 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace. 25 mm nominal dia Pipes m 349.28 349.28 35.0 False None None False None False 12224.8 0 3506383 125459 None Common PWD SR 23-24 V-2 pg no 117 item no 13.4.1 Brass full way valve with C.I. wheel (screwed end) 25 mm dia No 647.82 647.82 4.0 False None None False None False 2591.28 0 3506384 125459 None Common PWD SR 23-24 V-2 pg no 126 item no 13.53 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 (CATCH BASIN) No 6657.56 6657.56 8.0 False None None False None False 53260.48 0 3506385 125459 None 2018-19 pg no 90 item no 12.112.2 Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead).15cms x 10cms No 330.4 330.4 4.0 False None None False None False 1321.6 0 3506386 125459 None Common PWD SR 23-24 V-2 pg no 123 item no 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. l 10.62 10.62 2000.0 False None None False None False 21240.0 0 3506387 125459 None CommonPWD SR 23-24 V-2 pg no 136 item no 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40mm dia pipes, From wash basin waste lines Each 109.65 109.65 4.0 False None None False None False 438.6 0 3506388 125459 None Common PWD SR 23-24 V-5 pg no 191 item no 16.7.4 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines m 165.66 165.66 5.0 False None None False None False 828.3 0 3506389 125459 None Common PWD SR 23-24 V-5 pg no A-44 item no 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines m 146.59 146.59 30.0 False None None False None False 4397.7 0 3506390 125459 None Common PWD SR 23-24 V-5 pg no A-44 item no 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines m 303.91 303.91 30.0 False None None False None False 9117.3 0 3506391 125459 None Common PWD SR 23-24 V-2 pg no 136 item no 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 1454.0 1454.0 2.0 False None None False None False 2908.0 0 3506392 125459 None Common PWD SR 23-24 V-2 pg no 138 item no 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Each 13376.76 13376.76 2.0 False None None False None False 26753.52 0 3506393 125459 None Common PWD SR 23-24 V-2 pg no 132 item no 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Each 3673.13 3673.13 2.0 False None None False None False 7346.26 0 3506394 125459 None Common PWD SR 23-24 V-2 pg no 122 item no 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes m 368.72 368.72 5.0 False None None False None False 1843.6 0 3506395 125459 None Common PWD SR 23-24 V-2 pg no 122 item no 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes m 451.69 451.69 20.0 False None None False None False 9033.8 0 1720680485000 0 None None Buildings Construction of Block level Public Health Unit at TLH Gokak in Belagavi District.(Electrical) 559102.13 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3506396 125460 None Common PWD SR 23-24 V-6 pg no 5 item no 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch box Point 317.42 317.42 15.0 False None None False None False 4761.3 0 3506397 125460 None Common PWD SR 23-24 V-6 pg no 5 item no 2.2.2 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box Point 447.22 447.22 20.0 False None None False None False 8944.4 0 3506398 125460 None Common PWD SR 23-24 V-6 pg no 5 item no 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box Point 654.9 654.9 20.0 False None None False None False 13098.0 0 3506399 125460 None Common PWD SR 23-24 V-6 pg no 5 item no 2.2.4 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches Point 798.86 798.86 5.0 False None None False None False 3994.3 0 3506400 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-2Way Each 162.84 162.84 20.0 False None None False None False 3256.8 0 3506401 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 3Way Each 187.62 187.62 10.0 False None None False None False 1876.2 0 3506402 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5Way Each 208.86 208.86 4.0 False None None False None False 835.44 0 3506403 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6Way Each 259.6 259.6 4.0 False None None False None False 1038.4 0 3506404 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 Way Each 307.98 307.98 3.0 False None None False None False 923.94 0 3506405 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12Way Each 376.42 376.42 30.0 False None None False None False 11292.6 0 3506406 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module Each 161.66 161.66 20.0 False None None False None False 3233.2 0 3506407 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module Each 189.98 189.98 10.0 False None None False None False 1899.8 0 3506408 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 206.5 206.5 4.0 False None None False None False 826.0 0 3506409 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 276.12 276.12 4.0 False None None False None False 1104.48 0 3506410 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 335.12 335.12 3.0 False None None False None False 1005.36 0 3506411 125460 None Common PWD SR 23-24 V-6 pg no 8 item no 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module Each 405.92 405.92 30.0 False None None False None False 12177.6 0 3506412 125460 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch Each 120.36 120.36 100.0 False None None False None False 12036.0 0 3506413 125460 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch Each 195.88 195.88 4.0 False None None False None False 783.52 0 3506414 125460 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket Each 201.78 201.78 55.0 False None None False None False 11097.9 0 3506415 125460 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 421.26 421.26 10.0 False None None False None False 4212.6 0 3506416 125460 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch Each 212.4 212.4 40.0 False None None False None False 8496.0 0 3506417 125460 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each 384.68 384.68 4.0 False None None False None False 1538.72 0 3506418 125460 None Common PWD SR 23-24 V-6 pg no 9 item no 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Each 278.48 278.48 40.0 False None None False None False 11139.2 0 3506419 125460 None Common PWD SR 23-24 V-6 pg no 10 item no 3.14.6 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder No 83.78 83.78 30.0 False None None False None False 2513.4 0 3506420 125460 None Common PWD SR 23-24 V-6 pg no 4 item no 1.13 Supplyin and Fixing Metal Fan Box with Round Hook. No 138.06 138.06 10.0 False None None False None False 1380.6 0 3506421 125460 None Common PWD SR 23-24 V-6 pg no 2 item no 1.2.1 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2). 19/20mm dia 2mm thick m 77.88 77.88 300.0 False None None False None False 23364.0 0 3506422 125460 None Common PWD SR 23-24 V-6 pg no 2 item no 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2). 25mm dia 2mm thick m 92.04 92.04 400.0 False None None False None False 36816.0 0 3506423 125460 None Common PWD SR 23-24 V-6 pg no 2 item no 1.2.3 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2). 32mm dia 2.5mm thick m 121.54 121.54 50.0 False None None False None False 6077.0 0 3506424 125460 None Common PWD SR 23-24 V-6 pg no 2 item no 1.3.1 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick m 80.24 80.24 10.0 False None None False None False 802.4 0 3506425 125460 None Common PWD SR 23-24 V-6 pg no 2 item no 1.3.2 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick m 93.22 93.22 200.0 False None None False None False 18644.0 0 3506426 125460 None Common PWD SR 23-24 V-6 pg no 2 item no 1.3.3 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick m 116.82 116.82 10.0 False None None False None False 1168.2 0 3506427 125460 None Common PWD SR 23-24 V-6 pg no 5 item no 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010. 1.5 sqmm m 30.68 30.68 200.0 False None None False None False 6136.0 0 3506428 125460 None Common PWD SR 23-24 V-6 pg no 5 item no 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010. 2.5 sqmm m 49.56 49.56 500.0 False None None False None False 24780.0 0 3506429 125460 None Common PWD SR 23-24 V-6 pg no 5 item no 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010. 4 sqmm m 74.34 74.34 500.0 False None None False None False 37170.0 0 3506430 125460 None Common PWD SR 23-24 V-6 pg no 5 item no 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010. 6 sqmm m 108.56 108.56 200.0 False None None False None False 21712.0 0 3506431 125460 None Common PWD SR 23-24 V-6 pg no 6 item no 2.3.6 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010. 10 sqmm m 197.06 197.06 50.0 False None None False None False 9853.0 0 3506432 125460 None Common PWD SR 23-24 V-6 pg no 18 item no 5.19.3 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure I- Single Door 8 Way SP & N Each 1760.56 1760.56 2.0 False None None False None False 3521.12 0 3506433 125460 None Common PWD SR 23-24 V-6 pg no 18 item no 5.19.4 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure I- Single Door 12 Way SP & N Each 2198.34 2198.34 1.0 False None None False None False 2198.34 0 3506434 125460 None Common PWD SR 23-24 V-6 pg no 18 item no 5.19.12 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N Each 5829.2 5829.2 1.0 False None None False None False 5829.2 0 3506435 125460 None Common PWD SR 23-24 V-6 pg no 17 item no 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps SP Each 489.7 489.7 32.0 False None None False None False 15670.4 0 3506436 125460 None Common PWD SR 23-24 V-6 pg no 18 item no 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63Amps TPN Each 3643.84 3643.84 2.0 False None None False None False 7287.68 0 3506437 125460 None Common PWD SR 23-24 V-6 pg no 17 item no 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps DP Each 872.02 872.02 6.0 False None None False None False 5232.12 0 3506438 125460 None Common PWD SR 23-24 V-6 pg no 18 item no 5.20.4 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 32-40 A 2 pole Each 5379.62 5379.62 1.0 False None None False None False 5379.62 0 3506439 125460 None Common PWD SR 23-24 V-6 pg no 18 item no 5.20.8 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 32-40 Amps 4 pole Each 6073.46 6073.46 1.0 False None None False None False 6073.46 0 3506440 125460 None Common PWD SR 23-24 V-6 pg no 13 item no 32.07 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 3.5 core 25 sqmm (12GI Strips - 4 x 0.8 mm) Km 164667.82 164667.82 0.1 False None None False None False 16466.782 0 3506441 125460 None Common PWD SR 23-24 V-6 pg no 52 item no 21.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 2.5 sqmm to 25 sqmm Km 24645.48 24645.48 0.1 False None None False None False 2464.548 0 3506442 125460 None SR 19-20 item no 6.11.2 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only). 25mm dia Each 99.12 99.12 6.0 False None None False None False 594.72 0 3506443 125460 None SR 21-22 V-6 pg no item no BSR 49.05 Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 50mm m 451.94 451.94 10.0 False None None False None False 4519.4 0 3506444 125460 None SR 19-20 item no 6.17.7 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.25 sqmm Long Barrel Each 9.44 9.44 6.0 False None None False None False 56.64 0 3506445 125460 None SR 21-22 V-6 pg no item no BSR-29.03 Earth work excavation for cable trench of 0.5 to 0.75M. Width and Depth upto 1M including trial pits, depositing on bank upto a lead of 50M,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100M wherever necessary as directed. In soil (hard) cm 459.02 459.02 20.0 False None None False None False 9180.4 0 3506446 125460 None Common PWD SR 23-24 V-6 pg no 54 item no 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5M long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia. No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3506447 125460 None Common PWD SR 23-24 V-6 pg no 54 item no 12.58.2 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip m 96.76 96.76 40.0 False None None False None False 3870.4 0 3506448 125460 None Common PWD SR 23-24 V-6 pg no 43 item no 11.3.2 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w Each 814.2 814.2 25.0 False None None False None False 20355.0 0 3506449 125460 None Common PWD SR 23-24 V-6 pg no 44 item no 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED square or round down light 10-12W Each 1044.3 1044.3 6.0 False None None False None False 6265.8 0 3506450 125460 None Common PWD SR 23-24 V-6 pg no 47 item no 11.11.3 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K Each 175.82 175.82 6.0 False None None False None False 1054.92 0 3506451 125460 None Common PWD SR 23-24 V-6 pg no 46 item no 40757 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than 130lm/w, nominal CRI greater than75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40W No 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3506452 125460 None Common PWD SR 23-24 V-6 pg no 30 item no 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3506453 125460 None Common PWD SR 23-24 V-6 pg no 30 item no 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model Each 3521.12 3521.12 8.0 False None None False None False 28168.96 0 3506454 125460 None Common PWD SR 23-24 V-6 pg no 56 item no 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders Each 143.96 143.96 36.0 False None None False None False 5182.56 0 3506455 125460 None Common PWD SR 23-24 V-6 pg no 57 item no 13.1 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 201.78 201.78 8.0 False None None False None False 1614.24 0 3506456 125460 None Common PWD SR 23-24 V-6 pg no 57 item no 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3506457 125460 None Common PWD SR 23-24 V-6 pg no 56 item no 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12Ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5M. Length Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3506458 125460 None Common PWD SR 23-24 V-6 pg no 56 item no 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 191.16 191.16 2.0 False None None False None False 382.32 0 3506459 125460 None Common PWD SR 23-24 V-6 pg no 20 item no 5.42.2 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16SWG Sq CM 0.5 0.5 30000.0 False None None False None False 15000.0 0 3506460 125460 None Common PWD SR 23-24 V-6 pg no 20 item no 5.40.1 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips m 2908.7 2908.7 2.0 False None None False None False 5817.4 0 3506461 125460 None Common PWD SR 23-24 V-6 pg no 20 item no 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 40x40x6mm m 359.9 359.9 6.0 False None None False None False 2159.4 0 3506462 125460 None Common PWD SR 23-24 V-6 pg no 20 item no 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 50x100x50x6mm C channel m 892.08 892.08 4.0 False None None False None False 3568.32 0 3506463 125460 None Common PWD SR 23-24 V-6 pg no 15 item no 5.11.2 Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 100 A Each 8366.2 8366.2 1.0 False None None False None False 8366.2 0 3506464 125460 None Common PWD SR 23-24 V-6 pg no 17 item no 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE- 100Amps 25kA Each 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3506465 125460 None Common PWD SR 23-24 V-6 pg no 19 item no 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 10991.7 10991.7 1.0 False None None False None False 10991.7 0 3506466 125460 None Common PWD SR 23-24 V-6 pg no 19 item no 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C Each 607.7 607.7 6.0 False None None False None False 3646.2 0 3506467 125460 None Common PWD SR 23-24 V-6 pg no 19 item no 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound (48/6.32) Each 663.16 663.16 6.0 False None None False None False 3978.96 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1720695065000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1720695065000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1720695065000 1 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste as prescribed in the tender document. None 1720695065000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1720695065000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1720695117000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end None 1720695131000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection None 1720695142000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1720695163000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs None 1720695190000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1720695210000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1720695230000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1720695241000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1720695259000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1720695273000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1720695291000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid None 1720695374000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1720695384000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM ( Monday to Saturday) Ph No: 91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time. None 1720695397000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1720695409000 0 None None ELIGIBILITY Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work. None 1720695437000 0 None None ELIGIBILITY Tenderer should have latest GST Registration and latest clearance certificate in their name None 1720695447000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be inclusive of GST. None 1720695455000 0 None None ELIGIBILITY Special Instructions to tenderers - as per bid document. None 1720695465000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work. None 1720695476000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2019-20, 2020-21 2021-22, 2022-23 & 2023-24. None 1720695485000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive. None 1720695503000 0 None None ELIGIBILITY The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b)(c)(d)and (e). None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Clause ITT 3.2(a): To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been achieved in at least one financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs. 49.99 Lakhs. Note : a) For Clause 3.2 (a) the certificate duly certified by the charted accountant is to be submitted Past Experience None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been Satisfactorily completed at least any construction work of value not less than Rs. 12.50 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs. 2.70 Lakhs in any one year (2019-20 to 2023-24) .Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d). The letter of willingness of the sub contractor to be engaged for electrical works should be obtained and uploaded in the e-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs. 1.50 Lakhs in any one year (2019-20 to 2023-24). Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e). The letter of willingness of the sub contractor to be engaged for water Supply works should be obtained and uploaded in the e-portal Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24). Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1 PCC/RCC 77.00 Cum 2 TMT Steel 4.30 T 3 Plastering 834.00 Sqm 4 Painting 834.00 Sqm 5 Flooring 200.00 Sqm. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (c). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None KPWD Class-III & above Registration Certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- KPWD Class-III & above Registration Certificate
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid KPWD Class III & above Registration Certificate True Technical Bid SC Reserved Category Certificate True Technical Bid GST Registration True Technical Bid Work done certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None