| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1719836465000 | 0 | None | None | Buildings | Construction of Proposed MRF Center (Material Recovery Facility) of PEB Structure in Pothnal Village of Pothnal Grama Panchayath at Manvi Taluka of Raichur District. | 12198319.17 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3428312 | 121491 | None | 001 | KSRB 2-2.2 : Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. | Cum | 254.1 | 254.1 | 321.5 | False | None | None | False | None | False | 81693.15 | 0 | | 3428313 | 121491 | None | 002 | KSRB 4-1.2: Providing and laying in position plain cement concrete of mix CC 1:3:6 (M10) with OPC cement @ 220 kgs with 40mm and down size graded granite metal coarse aggregates @ 0.892cum and fine aggregates @ 0.465cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. | Cum | 5947.2 | 5947.2 | 126.05 | False | None | None | False | None | False | 749644.56 | 0 | | 3428314 | 121491 | None | 003 | KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.460cum, with superplastisiser @ 3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached plasters, columns, pillars & plinths etc including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. | Cum | 7889.7 | 7889.7 | 64.85 | False | None | None | False | None | False | 511647.045 | 0 | | 3428315 | 121491 | None | 004 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification | Tonne | 93929.85 | 93929.85 | 3.3973 | False | None | None | False | None | False | 319107.879405 | 0 | | 3428316 | 121491 | None | 005 | KSRB 5.2-3 : Providing and constructing granite / trap / basalt size stone masonry in foundation with cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13 (Item No. 5.6 Page No. 25 PWD SR) | Unit | 5891.55 | 5891.55 | 38.12 | False | None | None | False | None | False | 224585.886 | 0 | | 3428317 | 121491 | None | 006 | KSRB 5.3-3 : Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13 (Item No. 5.9 Page no. 25 PWD SR) | Cum | 6708.45 | 6708.45 | 26.52 | False | None | None | False | None | False | 177908.094 | 0 | | 3428318 | 121491 | None | 007 | Providing and laying in position plain cement concrete of mix CC 1:2:4 (M15) with cement @ 240 kgs with 20mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.459cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, & cills including cost of all materials, labour, HOM of machinery, curing complete as per specifications. | Cum | 5947.2 | 5947.2 | 83.53 | False | None | None | False | None | False | 496769.616 | 0 | | 3428319 | 121491 | None | 008 | Earthwork excavation ( in deposits) and filling sides of foundation upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5 m. including cost of all labour complete as per specifications. | Cum | 279.3 | 279.3 | 650.26 | False | None | None | False | None | False | 181617.618 | 0 | | 3428320 | 121491 | None | 009 | Providing and supplying Non load bearing bricks of size 200/150/100 mm thickness for infill masonry with excellent thermal and sound insulation with density 700-800kg/m3 and compressive strength 3.5 N/mm2 & water absorption not greater than 15% & U value 1.00 W/m2K laid with Cement Mortar 1:6 conforming to Building envelope as per GRIHA certification etc complete. | Sqm | 779.1 | 779.1 | 109.15 | False | None | None | False | None | False | 85038.765 | 0 | | 3428321 | 121491 | None | 010 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1375.5 | 1375.5 | 320.57 | False | None | None | False | None | False | 440944.035 | 0 | | 3428322 | 121491 | None | 011 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 389.55 | 389.55 | 951.02 | False | None | None | False | None | False | 370469.841 | 0 | | 3428323 | 121491 | None | 012 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Kgs | 118.65 | 118.65 | 51464.83 | False | None | None | False | None | False | 6106302.0795 | 0 | | 3428324 | 121491 | None | 013 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.0.63 mm thick with zinc coating not less than 275 g/ m². | Sqm | 922.95 | 922.95 | 2031.39 | False | None | None | False | None | False | 1874871.4005 | 0 | | 3428325 | 121491 | None | 014 | Providing and fixing 1mm thick M.S. sheet garage door with frame and diagonal braces of size 40x40x6 mm angle Iron, using M.S. flats 30x6 mm for diagonal braces and central cross pieces 3.15mm thick M.S. Gusset plates at the junctions and corners, with handles, stoppers and locking arrangements etc., including applying a priming coat of red lead paint cost of materials, labour, HOM of machinery complete as per specifications. 1 double leaf door of size 2.4x2.4m | Sqm | 4701.9 | 4701.9 | 38.17 | False | None | None | False | None | False | 179471.523 | 0 | | 3428326 | 121491 | None | 015 | SOLID PVC DOOR FRAME Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge | Sqm | 333.9 | 333.9 | 20.59 | False | None | None | False | None | False | 6875.001 | 0 | | 3428327 | 121491 | None | 016 | SOLID PANEL PVC DOOR SHUTTER Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm fro styles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form styles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the styles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 m.m Aluminium hinges. (Item No. 9.83 Page No. 60 PWD SR) | Sqm | 1667.4 | 1667.4 | 20.59 | False | None | None | False | None | False | 34331.766 | 0 | | 3428328 | 121491 | None | 017 | Providing & fixing Vitrified glazed tiles of approved quality & colour of size 600x600x10mm thick fixed on a bed of 12mm thick cement mortar 1:3 mix, flush pointing with white cemnt using colour pigment, including cost of materials, labour, curing complete as per specification | Sqm | 1392.3 | 1392.3 | 82.4 | False | None | None | False | None | False | 114725.52 | 0 | | 3428329 | 121491 | None | 018 | Providing skirting, dado, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( excluding cost of rough plastered surface which should be measured and paid separately ) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Specification No.KBS 14.16, 14.17 Colour glazed tiles 30x45 cms 6mm thick with border of size 30x10 | Sqm | 1461.6 | 1461.6 | 127.68 | False | None | None | False | None | False | 186617.088 | 0 | | 3428330 | 121491 | None | 019 | Providing and fixing white vitreous china clay, water closet Indian type ( Squatting pan ) of size 580mm with footrests, 100mm S or P trap, (approved make) cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. | Nos | 6549.9 | 6549.9 | 7.0 | False | None | None | False | None | False | 45849.3 | 0 | | 3428331 | 121491 | None | 020 | KSRB 11-11.3 : Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 (Item No. 12.25 Page No. 83 PWD SR) | No | 2462.25 | 2462.25 | 4.0 | False | None | None | False | None | False | 9849.0 | 0 |
| | 1719836465000 | 0 | None | None | Buildings | For Water Supply and Sanitation Work | 57506.4 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3428332 | 121492 | None | 001 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complet ) (WS & UGD works CSR 2021-22 Vol-V Pg.No.151 SOR. Code.O010) 0.00mtrs. to 50.00 mtrs depth | Rmtr | 364.35 | 364.35 | 50.0 | False | None | None | False | None | False | 18217.5 | 0 | | 3428333 | 121492 | None | 002 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work | Rmtr | 464.1 | 464.1 | 50.0 | False | None | None | False | None | False | 23205.0 | 0 | | 3428334 | 121492 | None | 003 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore | Rmtr | 893.55 | 893.55 | 18.0 | False | None | None | False | None | False | 16083.9 | 0 |
| | 1719836465000 | 0 | None | None | Buildings | For Pumping Machinery at Proposed Borewell | 163012.5 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3428335 | 121493 | None | 001 | Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP (WS & UGD works CSR 2021-22 Vol-V Pg.No.160 SOR. Code.P150E)
5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00”
Designed 4.00 HP Head 90 m Discharge 1.339LPS | No | 37747.5 | 37747.5 | 1.0 | False | None | None | False | None | False | 37747.5 | 0 | | 3428336 | 121493 | None | 002 | Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.(WS & UGD works CSR 2021-22 Vol-V Pg.No.161 SOR. Code.P230E) | Rmtr | 304.5 | 304.5 | 95.0 | False | None | None | False | None | False | 28927.5 | 0 | | 3428337 | 121493 | None | 003 | Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments (WS & UGD works CSR 2021-22 Vol-V Pg.No.162 SOR. Code.P240B) | Nos | 472.5 | 472.5 | 1.0 | False | None | None | False | None | False | 472.5 | 0 | | 3428338 | 121493 | None | 004 | Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments(WS & UGD works CSR 2021-22 Vol-V Pg.No.162 SOR. Code.P250A) | Nos | 1312.5 | 1312.5 | 1.0 | False | None | None | False | None | False | 1312.5 | 0 | | 3428339 | 121493 | None | 005 | Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (WS & UGD works CSR 2021-22 Vol-V Pg.No.162 SOR. Code.P260A) | Nos | 1338.75 | 1338.75 | 1.0 | False | None | None | False | None | False | 1338.75 | 0 | | 3428340 | 121493 | None | 006 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Outdoor type NOTE: 1) DOL Direct Online Starter 2) S-D- Star Delta Starter (WS & UGD works CSR 2021-22 Vol-V Pg.No.162 SOR. Code.P280A) | Set | 13125.0 | 13125.0 | 1.0 | False | None | None | False | None | False | 13125.0 | 0 | | 3428341 | 121493 | None | 007 | Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. (WS & UGD works CSR 2021-22 Vol-V Pg.No.162 SOR. Code.P290A) | Kvar | 577.5 | 577.5 | 4.0 | False | None | None | False | None | False | 2310.0 | 0 | | 3428342 | 121493 | None | 008 | Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box.(WS & UGD works CSR 2021-22 Vol-V Pg.No.162 SOR. Code.P300A) | 3 Poles | 1312.5 | 1312.5 | 1.0 | False | None | None | False | None | False | 1312.5 | 0 | | 3428343 | 121493 | None | 009 | Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments. (WS & UGD works CSR 2021-22 Vol-V Pg.No.163 SOR. Code.P320A) | Rmtr | 603.75 | 603.75 | 90.0 | False | None | None | False | None | False | 54337.5 | 0 | | 3428344 | 121493 | None | 010 | Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (WS & UGD works CSR 2021-22 Vol-V Pg.No.163 SOR. Code.P360A) | Job | 6457.5 | 6457.5 | 1.0 | False | None | None | False | None | False | 6457.5 | 0 | | 3428345 | 121493 | None | 011 | Labour charges for erection of Outdoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. (WS & UGD works CSR 2021-22 Vol-V Pg.No.163 SOR. Code.P370A) | Job | 1417.5 | 1417.5 | 1.0 | False | None | None | False | None | False | 1417.5 | 0 | | 3428346 | 121493 | None | 012 | Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. (WS & UGD works CSR 2021-22 Vol-V Pg.No.163 SOR. Code.P390B) | Rmtr | 204.75 | 204.75 | 25.0 | False | None | None | False | None | False | 5118.75 | 0 | | 3428347 | 121493 | None | 013 | Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. (WS & UGD works CSR 2021-22 Vol-V Pg.No.163 SOR. Code.P400A) | Rmtr | 141.75 | 141.75 | 20.0 | False | None | None | False | None | False | 2835.0 | 0 | | 3428348 | 121493 | None | 014 | Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. (WS & UGD works CSR 2021-22 Vol-V Pg.No.164 SOR. Code.P410A) | Rmtr | 84.0 | 84.0 | 20.0 | False | None | None | False | None | False | 1680.0 | 0 | | 3428349 | 121493 | None | 015 | Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work. (WS & UGD works CSR 2021-22 Vol-V Pg.No.164 SOR. Code.P420B) | Each | 682.5 | 682.5 | 1.0 | False | None | None | False | None | False | 682.5 | 0 | | 3428350 | 121493 | None | 016 | Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. (WS & UGD works CSR 2021-22 Vol-V Pg.No.164 SOR. Code.P430A) | Job | 3937.5 | 3937.5 | 1.0 | False | None | None | False | None | False | 3937.5 | 0 |
| | 1719836465000 | 0 | None | None | Buildings | For Pipe Line Work | 199439.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3428351 | 121494 | None | 001 | Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.(PWD works CSR 2021-22 Vol-I Pg.No.6 It.no 1.6.1) | Cum | 486.94 | 486.94 | 172.13 | False | None | None | False | None | False | 83816.9822 | 0 | | 3428352 | 121494 | None | 002 | Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift with Murrum | Cum | 383.25 | 383.25 | 19.13 | False | None | None | False | None | False | 7331.5725 | 0 | | 3428353 | 121494 | None | 003 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete.Upto 110mm dia Coil shall be used. (Contractor will make his own arrangements for procuring water for testing) (WS & UGD works CSR 2021-22 Vol-V Pg.No.121 SOR. Code.K010 ) | Rmtr | 177.28 | 177.28 | 425.0 | False | None | None | False | None | False | 75344.0 | 0 | | 3428354 | 121494 | None | 004 | SHDPE electro fusion specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bends, reducers. Material Rates (WS & UGD works CSR 2021-22 Vol-V Pg.No.3 MAT.Code) 63 mm dia Electro fusion Elbow | No | 211.0 | 211.0 | 2.0 | False | None | None | False | None | False | 422.0 | 0 | | 3428355 | 121494 | None | 005 | SHDPE electro fusion specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bends, reducers. Material Rates (WS & UGD works CSR 2021-22 Vol-V Pg.No.3 MAT.Code) 63 mm dia Electro fusionTee | No | 210.0 | 210.0 | 2.0 | False | None | None | False | None | False | 420.0 | 0 | | 3428356 | 121494 | None | 006 | Providing, Laying and Fixing GI pipes conforming to IS 1239:1990
with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Heavy Duty GI pipe (WS & UGD works CSR 2021-22 Vol-V Pg.No.142 SOR. Code.N020 ) | Rmtr | 1005.46 | 1005.46 | 10.0 | False | None | None | False | None | False | 10054.6 | 0 | | 3428357 | 121494 | None | 007 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications. (PWD works CSR 2021-22 Vol-I Pg.No.7 It.no 1.10) | Cum | 128.1 | 128.1 | 172.13 | False | None | None | False | None | False | 22049.853 | 0 |
| | 1719836465000 | 0 | None | None | Buildings | FOR ELECTRICAL WORK | 414406.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3428358 | 121495 | None | 001 | Supplying Heavy Guage PVC Conduit pipe 19/20 Dia 2mm thick confirming to IS 2509 with suitable size bends metal /PVC junction boxes ,adhesive paste etc., and running before concreting the slab.The conduite should be tied to the before reinforcement rods by using binding wires & unused ways of junction boxes and pipe ends should be covered using PVC end enclousees,run with 18SWG GI fishes wire wherever necessary | Mtr | 45.15 | 45.15 | 2500.0 | False | None | None | False | None | False | 112875.0 | 0 | | 3428359 | 121495 | None | 002 | Supplying & Fixing Sheet Meatal Box made out of 18SWG sheet metal with Necssaery Holes for Cable/Conductor entry ass Reqiured with one coat of Priemer approved make etc., 180x90x65mm | Nos | 115.5 | 115.5 | 50.0 | False | None | None | False | None | False | 5775.0 | 0 | | 3428360 | 121495 | None | 003 | Wiring for lighting/Power circute using one of FRLS PVC insulated 1100V Grade Multi Starded copper with low conducter Resistence single core wire is open or concealed system of wiring with Specified IS -694:1990 and Confirming to GTP of Group A 4 sqmm | Rmtr | 44.21 | 44.21 | 2600.0 | False | None | None | False | None | False | 114946.0 | 0 | | 3428361 | 121495 | None | 004 | Supplying & adopting Loop System of in Existing PVC Conductor/Casing ,Caping Using 1100 V Grade copper conductor Flexible multi strand FRLS PVC insulated 2x1 Sqmm able with low conducter Resistence single core wire is open or concealed system of wiring Confirming to GTP without swich the ohter end of wire shall be terminted with sufficent Loose length in a wood /PVC Round Block complete for Each outlet Group A Medium Point Above 3.00mtr upto 6.00 mtr from Tapping Point to Outlet Wire Swich Box | Nos | 225.75 | 225.75 | 100.0 | False | None | None | False | None | False | 22575.0 | 0 | | 3428362 | 121495 | None | 005 | Supplying & Mounting 2.0 Nos Two way 6Amps Flush Type Switches either surface/flush Mounted on Existing Gang Box are in 4mm thich plsatic sheet & mouted on a flush mounted wooden box & wiring | Nos | 179.55 | 179.55 | 50.0 | False | None | None | False | None | False | 8977.5 | 0 | | 3428363 | 121495 | None | 006 | Supplying & Fixing Bakelight DP /Socket/ Switch with/without Neon indicator Over Existing wood Board or Flush Mounting in Plastic Plates /Nithces as per IS-1293 & IS-3854 Group A 32 Amps Flush /Projected type DP Switches | Nos | 196.35 | 196.35 | 50.0 | False | None | None | False | None | False | 9817.5 | 0 | | 3428364 | 121495 | None | 007 | Supplying & Fixing Superior Quality modular switch mounting poly corbonate plate with Necessary supporying Backplate with Required Nos of Machine Screws Bolts ,Nuts Etc., Complete on the Existing Metal /PVC Box 4 module | Nos | 128.1 | 128.1 | 150.0 | False | None | None | False | None | False | 19215.0 | 0 | | 3428365 | 121495 | None | 008 | Supplying of Horizental Type Street Light Florcent Fitting Suitable for Single /winlamp of 24 watts /25watts FTL T5 lamp Housing shall be with Pressure Dye cast Alluminum with UV Protected Clear acrylic corbonate lamp holder low loss high frequency Electronic Ballast with IP 54 Protection -do-2x4'-28watts | Nos | 1959.3 | 1959.3 | 30.0 | False | None | None | False | None | False | 58779.0 | 0 | | 3428366 | 121495 | None | 009 | Supplying& Fixing miniture circute breaker Existing MCB distribution Board using necessary fixing Material & C Type curve Indictor ON/OFF Energy cross-3 with short circute breaking capacity of 10K & complete wiring as required confirming IEC 60898 40-63Amps TPN | Nos | 2032.8 | 2032.8 | 20.0 | False | None | None | False | None | False | 40656.0 | 0 | | 3428367 | 121495 | None | 010 | Supplying & Fixing Ceiling Fan | Each | 2079.0 | 2079.0 | 10.0 | False | None | None | False | None | False | 20790.0 | 0 |
|
|
|---|