createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1720229908259 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 1389250.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 23-07-2024 17:30:00 tenderQueryClose 20-07-2024 16:00:00 technicalBidOpen 25-07-2024 11:30:00 publishedDate 16-07-2024 17:27:13 publishedByPost PWD_EE_DIV_CMJ publishedByUser KPE13484 - S P MAHESH bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 13-07-2024 16:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson TECHNICAL ASSISTANT splitEmdRequiredYn True emdBankGuarantee 1289250.00 emdCash 100000.00 bgValidityPeriod 90 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08226222027 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1720229908296 version 4 createdDate None modifiedDate None tenderNumber PWD/2024-25/BD/WORK_INDENT11183 title Construction of 30 Persons Dormitory (Each Unit) at M.M. Hills in Hanur taluk of Chamarajanagar District - (Phase-III) description Construction of 30 Persons Dormitory (Each Unit) at M.M. Hills in Hanur taluk category WORKS categoryText Works ecv 92615409.37 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1678 locationName PWD Division Office Chamarajanagara provisionalAmount 100000000.0 groupOverheadTotal None fileNumber PWD/MMH/BD/DM3/2024-2025
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1720229908000 0 None None Buildings BASEMENT FLOOR 28123000.83 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3461884 123426 None 1.12,vol-1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-8, SL NO-1.12 Cum 125.55 125.55 450.0 False None None False None False 56497.5 0 3461885 123426 None 1.14.1,vol-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-8, SL NO-1.14.1 Cum 134.8 134.8 3066.88 False None None False None False 413415.424 0 3461886 123426 None 1.15.1,vol-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. IN ORDINARY/SOFT ROCK WITHOUT BLASTING UP TO 1.5M DEPTH. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-8, SL NO-1.15.1 Cum 479.74 479.74 657.19 False None None False None False 315280.3306 0 3461887 123426 None 1.15.2,vol-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. IN ORDINARY/SOFT ROCK WITHOUT BLASTING UP Depth exceeding 1.5 m, but not exceeding 3 m. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-9, SL NO-1.15.2 Cum 561.68 561.68 657.19 False None None False None False 369130.4792 0 3461888 123426 None 1.14.2,vol-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work, Depth 3 m to 6 m. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-8, SL NO-1.14.2 Cum 154.63 154.63 1587.11 False None None False None False 245414.8193 0 3461889 123426 None 1.15.3,vol-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. IN ORDINARY/SOFT ROCK WITHOUT BLASTING UP TO 1.5M DEPTH.Depth exceeding 3m, but not exceeding 4.5m. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-8, SL NO-1.15.3 Cum 611.9 611.9 680.19 False None None False None False 416208.261 0 3461890 123426 None 4.1,vol-2 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. . (RATE INCLUDING GST 18 PERCENT) Sqm 155.95 155.95 1284.32 False None None False None False 200289.704 0 3461891 123426 None 2.1.3,vol-1 Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-15, SL NO-2.1.3 Cum 7915.06 7915.06 176.15 False None None False None False 1394237.819 0 3461892 123426 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 633.2 633.2 50.87 False None None False None False 32210.884 0 3461893 123426 None 5.4,vol-2 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-9, SL NO-5.4 Cum 8443.7 8443.7 154.2 False None None False None False 1302018.54 0 3461894 123426 None 2.2.3,vol-1 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. . (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-15, SL NO-2.2.3 Cum 8373.66 8373.66 635.07 False None None False None False 5317860.2562 0 3461895 123426 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 791.51 791.51 387.6 False None None False None False 306789.276 0 3461896 123426 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work . (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 633.2 633.2 247.46 False None None False None False 156691.672 0 3461897 123426 None 2.4.3,vol-1 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates . (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-16, SL.NO:2.4.3 Cum 8373.66 8373.66 66.98 False None None False None False 560867.7468 0 3461898 123426 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 5861.56 5861.56 35.84 False None None False None False 210078.3104 0 3461899 123426 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 4186.83 4186.83 31.15 False None None False None False 130419.7545 0 3461900 123426 None 1.9,vol-1 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-7, SL NO-1.9 Cum 351.55 351.55 1682.95 False None None False None False 591641.0725 0 3461901 123426 None 2.5.2,vol-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-15, SL NO-2.5.2 Cum 9043.71 9043.71 191.07 False None None False None False 1727981.6697 0 3461902 123426 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 5426.23 5426.23 66.0 False None None False None False 358131.18 0 3461903 123426 None pg-111, vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 4521.85 4521.85 125.44 False None None False None False 567220.864 0 3461904 123426 None 2.11a,vol-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-18, SL NO-2.11a t 118226.37 118226.37 82.59 False None None False None False 9764315.8983 0 3461905 123426 None 6.33,vol-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-17, SL NO-6.33 Sqm 1626.89 1626.89 543.24 False None None False None False 883791.7236 0 3461906 123426 None 8.16,vol-2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-43, SL NO-8.16 m 44.93 44.93 700.0 False None None False None False 31451.0 0 3461907 123426 None 11.34a,vol-2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-86, SL NO-11.34A Kg 222.03 222.03 467.78 False None None False None False 103861.1934 0 3461908 123426 None 11.6.1,vol-2 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-78, SL NO-11.6.1 Sqm 3479.77 3479.77 22.5 False None None False None False 78294.825 0 3461909 123426 None 8.1.2,vol-2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.1.2 Sqm 318.51 318.51 791.31 False None None False None False 252040.1481 0 3461910 123426 None 8.2.1,vol-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.2.1 Sqm 389.87 389.87 554.04 False None None False None False 216003.5748 0 3461911 123426 None 11.11.1,vol-2 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded ston aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-78, SL NO-11.11.1 Kg 195.6 195.6 266.56 False None None False None False 52139.136 0 3461912 123426 None 8.10,vol-2 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-43, SL NO-8.10 Sqm 278.86 278.86 1169.54 False None None False None False 326137.9244 0 3461913 123426 None 8.51,vol-2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-50, SL NO-8.51 Sqm 132.16 132.16 1953.62 False None None False None False 258190.4192 0 3461914 123426 None 9.32,vol-2 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-64, SL NO-9.32 Sqm 3412.37 3412.37 33.19 False None None False None False 113256.5603 0 3461915 123426 None 10.2,vol-2 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.(HALF NOSING) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-69, SL NO-10.2 m 433.48 433.48 36.0 False None None False None False 15605.28 0 3461916 123426 None 11.28,vol-2 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-85, SL NO-11.28 Kg 746.7 746.7 108.8 False None None False None False 81240.96 0 3461917 123426 None 9.2,vol-2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-59, SL NO-9.2 Sqm 1057.28 1057.28 785.3 False None None False None False 830281.984 0 3461918 123426 None 8.41,vol-2 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-48, SL NO-8.41 Sqm 220.71 220.71 55.0 False None None False None False 12139.05 0 3461919 123426 None 8.54.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-50, SL NO-8.54.2 Sqm 145.38 145.38 1953.62 False None None False None False 284017.2756 0 3461920 123426 None 8.31,vol-2 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-46, SL NO-8.31 Sqm 235.24 235.24 628.5 False None None False None False 147848.34 0 1720229908000 0 None None Buildings GROUND FLOOR 17234893.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3461921 123427 None sl 1.14.1,vol-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-8, SL NO-1.14.1 Cum 134.8 134.8 24.57 False None None False None False 3312.036 0 3461922 123427 None sl 1.15.1,vol-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. IN ORDINARY / SOFT ROCK WITHOUT BLASTING UP TO 1.5M DEPTH (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-8, SL NO-1.15.1 Cum 479.74 479.74 14.04 False None None False None False 6735.5496 0 3461923 123427 None sl 4.1,vol-2 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-5, SL NO-4.1 Sqm 155.95 155.95 139.68 False None None False None False 21783.096 0 3461924 123427 None sl 2.1.3,vol-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates.(RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-15, SL NO-2.1.3 Cum 7915.06 7915.06 18.13 False None None False None False 143500.0378 0 3461925 123427 None sl 5.4,vol-2 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-9, SL NO-5.4 Cum 8443.7 8443.7 54.36 False None None False None False 458999.532 0 3461926 123427 None sl 2.5.2,vol-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-17, SL NO-2.5.2 Cum 9043.71 9043.71 231.6 False None None False None False 2094523.236 0 3461927 123427 None pg 111, vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 4521.85 4521.85 125.55 False None None False None False 567718.2675 0 3461928 123427 None pg 111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 5426.23 5426.23 64.75 False None None False None False 351348.3925 0 3461929 123427 None pg 111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 6330.6 6330.6 35.48 False None None False None False 224609.688 0 3461930 123427 None pg 111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 4069.67 4069.67 5.66 False None None False None False 23034.3322 0 3461931 123427 None sl 1.9,vol-1 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-7, SL NO-1.9 Cum 351.55 351.55 109.35 False None None False None False 38441.9925 0 3461932 123427 None sl 2.11a,vol-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-18, SL NO-2.11a Tonne 118226.37 118226.37 28.76 False None None False None False 3400190.4012 0 3461933 123427 None sl 8.16,vol-2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-43, SL NO-8.16 m 44.93 44.93 700.0 False None None False None False 31451.0 0 3461934 123427 None sl 6.33,vol-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-17, SL NO-6.33 Sqm 1626.89 1626.89 1000.43 False None None False None False 1627589.5627 0 3461935 123427 None sl 6.34,vol-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-17, SL NO-6.34 Sqm 1459.05 1459.05 228.69 False None None False None False 333670.1445 0 3461936 123427 None sl 12.13.1,vol-2 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-100, SL NO-12.13.1 Cum 130593.9 130593.9 0.79 False None None False None False 103169.181 0 3461937 123427 None sl 12.93.2,vol-2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 125mm. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-111, SL NO-12.93.2 m 1009.7 1009.7 114.0 False None None False None False 115105.8 0 3461938 123427 None sl 12.94.1,vol-2 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-112, SL NO-12.94.1 Sqm 4605.78 4605.78 35.91 False None None False None False 165393.5598 0 3461939 123427 None sl 11.35.1.2,vol-2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-87, SL NO-11.35.1.2 Kg 646.26 646.26 33.66 False None None False None False 21753.1116 0 3461940 123427 None sl 11.35.2.2,vol-2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-88, SL NO-11.35.2.2 Kg 754.63 754.63 68.75 False None None False None False 51880.8125 0 3461941 123427 None sl 11.37.2,vol-2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.5 kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-89, SL NO-11.37.2 Kg 1547.59 1547.59 34.21 False None None False None False 52943.0539 0 3461942 123427 None sl 12.90,vol-2 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). (RATE INCLUDING GST 18 PERCENT)ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-110, SL NO-12.90 Sqm 8899.65 8899.65 63.0 False None None False None False 560677.95 0 3461943 123427 None sl 11.1.1,vol-2 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded ston aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-78, SL NO-11.11.1 Kg 195.6 195.6 81.42 False None None False None False 15925.752 0 3461944 123427 None sl 12.57.2,vol-2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick one side teak and one side commercial. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-105, SL NO-12.57.2 Sqm 4616.35 4616.35 28.88 False None None False None False 133320.188 0 3461945 123427 None sl 11.34a,vol-2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-86, SL NO-11.34A Kg 222.03 222.03 1816.5 False None None False None False 403317.495 0 3461946 123427 None sl 8.1.2,vol-2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.1.2 Sqm 318.51 318.51 1318.55 False None None False None False 419971.3605 0 3461947 123427 None sl 8.2.1,vol-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.2.1 Sqm 389.87 389.87 850.51 False None None False None False 331588.3337 0 3461948 123427 None sl 8.1.2,vol-2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.1.2 Sqm 318.51 318.51 553.55 False None None False None False 176311.2105 0 3461949 123427 None sl 8.10,vol-2 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-43, SL NO-8.10 Sqm 278.86 278.86 1169.54 False None None False None False 326137.9244 0 3461950 123427 None sl 8.51,vol-2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-50, SL NO-8.51 Sqm 132.16 132.16 3214.14 False None None False None False 424780.7424 0 3461951 123427 None sl 8.54.2,vol-2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-50, SL NO-8.54.2 Sqm 145.38 145.38 3214.14 False None None False None False 467271.6732 0 3461952 123427 None 8.31,vol-2 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-46, SL NO-8.31 Sqm 235.24 235.24 850.51 False None None False None False 200073.9724 0 3461953 123427 None 9.32,vol-2 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-64, SL NO-9.32 Sqm 3412.37 3412.37 54.69 False None None False None False 186622.5153 0 3461954 123427 None 10.2,vol-2 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.(HALF NOSING). (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-69, SL NO-10.2 m 433.48 433.48 36.0 False None None False None False 15605.28 0 3461955 123427 None 11.28,vol-2 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-85, SL NO-11.28 Kg 746.71 746.71 91.52 False None None False None False 68338.8992 0 3461956 123427 None 9.39,vol-2 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-65, SL NO-9.39 Sqm 1915.0 1915.0 336.75 False None None False None False 644876.25 0 3461957 123427 None 9.9,vol-2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-60, SL NO-9.9 Sqm 1422.04 1422.04 88.37 False None None False None False 125665.6748 0 3461958 123427 None 9.24,vol-2 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-63, SL NO-9.24 Sqm 3769.2 3769.2 700.57 False None None False None False 2640588.444 0 3461959 123427 None 15.1,vol-2 Providing and laying water proofing treatment with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-149, SL NO-15.1 Sqm 1079.75 1079.75 116.02 False None None False None False 125272.595 0 3461960 123427 None 7.18,vol-2 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-23, SL NO-7.18 Cum 2665.67 2665.67 23.77 False None None False None False 63362.9759 0 3461961 123427 None 2.1.4,vol-1 Providing and laying in position cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-15, SL NO-2.1.4 Cum 8216.39 8216.39 8.28 False None None False None False 68031.7092 0 1720229908000 0 None None Buildings FIRST FLOOR 16970005.84 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3461962 123428 None 2.5.2,vol1 Providing and laying in position plain cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-17, SL NO-2.5.2 Cum 9124.46 9124.46 259.59 False None None False None False 2368618.5714 0 3461963 123428 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 4521.85 4521.85 133.82 False None None False None False 605113.967 0 3461964 123428 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 5426.23 5426.23 84.3 False None None False None False 457431.189 0 3461965 123428 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 6330.6 6330.6 35.48 False None None False None False 224609.688 0 3461966 123428 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 4069.67 4069.67 6.79 False None None False None False 27633.0593 0 3461967 123428 None 2.11a,vol-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-18, SL NO-2.11a t 118226.37 118226.37 31.6 False None None False None False 3735953.292 0 3461968 123428 None 8.16,vol-2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-43, SL NO-8.16 m 44.93 44.93 700.0 False None None False None False 31451.0 0 3461969 123428 None 6.33,vol-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-17, SL NO-6.33 Sqm 1626.89 1626.89 1000.43 False None None False None False 1627589.5627 0 3461970 123428 None 6.34,vol-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-17, SL NO-6.34 Sqm 1459.05 1459.05 228.69 False None None False None False 333670.1445 0 3461971 123428 None 12.13.1,vol-1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-100, SL NO-12.13.1 Cum 130593.9 130593.9 0.71 False None None False None False 92721.669 0 3461972 123428 None 12.93.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 125mm (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-111, SL NO-12.93.2 m 1009.7 1009.7 114.0 False None None False None False 115105.8 0 3461973 123428 None 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-112, SL NO-12.94.1 Sqm 4605.78 4605.78 35.91 False None None False None False 165393.5598 0 3461974 123428 None 12.90,vol-2 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). (RATE INCLUDING GST 18 PERCENT)ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-110, SL NO-12.90 Sqm 8899.65 8899.65 63.0 False None None False None False 560677.95 0 3461975 123428 None 11.11.1,vol-2 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded ston aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-78, SL NO-11.11.1 Kg 195.6 195.6 81.42 False None None False None False 15925.752 0 3461976 123428 None 12.57.2,vol-2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick one side teak and one side commercial (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-105, SL NO-12.57.2 Sqm 4616.35 4616.35 26.25 False None None False None False 121179.1875 0 3461977 123428 None 11.34a,vol-1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-86, SL NO-11.34A Kg 222.03 222.03 1816.5 False None None False None False 403317.495 0 3461978 123428 None 8.1.2,vol-2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.1.2 Sqm 318.51 318.51 1318.55 False None None False None False 419971.3605 0 3461979 123428 None 8.2.1,vol-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.2.1 Sqm 389.87 389.87 850.51 False None None False None False 331588.3337 0 3461980 123428 None 8.10,vol,2 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-43, SL NO-8.10 Sqm 278.86 278.86 1169.54 False None None False None False 326137.9244 0 3461981 123428 None 8.51,vol-2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-50, SL NO-8.51 Sqm 132.16 132.16 2469.48 False None None False None False 326366.4768 0 3461982 123428 None 8.1.2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.1.2 Sqm 318.51 318.51 571.72 False None None False None False 182098.5372 0 3461983 123428 None 8.54.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-50, SL NO-8.54.2 Sqm 145.38 145.38 2469.48 False None None False None False 359013.0024 0 3461984 123428 None 8.31,vol-1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-46, SL NO-8.31 Sqm 235.24 235.24 850.51 False None None False None False 200073.9724 0 3461985 123428 None 9.32,vol-2 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-64, SL NO-9.32 Sqm 3412.37 3412.37 54.69 False None None False None False 186622.5153 0 3461986 123428 None 10.2,vol-2 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.(HALF NOSING) (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-69, SL NO-10.2 m 433.48 433.48 36.0 False None None False None False 15605.28 0 3461987 123428 None 11.28,vol-2 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-85, SL NO-11.28 Kg 746.71 746.71 91.52 False None None False None False 68338.8992 0 3461988 123428 None 9.39,vol-2 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-65, SL NO-9.39 Sqm 1915.0 1915.0 336.75 False None None False None False 644876.25 0 3461989 123428 None 9.9,vol-2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-60, SL NO-9.9 Sqm 1422.04 1422.04 88.37 False None None False None False 125665.6748 0 3461990 123428 None 9.24,vol-1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-63, SL NO-9.24 Sqm 3769.2 3769.2 700.57 False None None False None False 2640588.444 0 3461991 123428 None 15.1,vol-2 Providing and laying water proofing treatment with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-149, SL NO-15.1 Sqm 1079.75 1079.75 116.02 False None None False None False 125272.595 0 3461992 123428 None 7.18,vol-2 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-23, SL NO-7.18 Cum 2665.67 2665.67 23.77 False None None False None False 63362.9759 0 3461993 123428 None 2.1.4,vol-1 Providing and laying in position cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-15, SL NO-2.1.4 Cum 8216.39 8216.39 8.28 False None None False None False 68031.7092 0 1720229908000 0 None None Buildings SECOND FLOOR 16513328.78 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3461994 123429 None 2.5.2,vol-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-17, SL NO-2.5.2 Cum 9205.2 9205.2 245.3 False None None False None False 2258035.56 0 3461995 123429 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 4521.85 4521.85 127.4 False None None False None False 576083.69 0 3461996 123429 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 5426.23 5426.23 80.15 False None None False None False 434912.3345 0 3461997 123429 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 6330.6 6330.6 30.96 False None None False None False 195995.376 0 3461998 123429 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 4069.67 4069.67 6.79 False None None False None False 27633.0593 0 3461999 123429 None 2.11a,vol-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-18, SL NO-2.11a t 118226.37 118226.37 29.45 False None None False None False 3481766.5965 0 3462000 123429 None 8.16,vol-2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment). (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-43, SL NO-8.16 m 44.93 44.93 700.0 False None None False None False 31451.0 0 3462001 123429 None 6.33,vol-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-17, SL NO-6.33 Sqm 1626.89 1626.89 1000.43 False None None False None False 1627589.5627 0 3462002 123429 None 6.34,vol-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-17, SL NO-6.34 Sqm 1459.05 1459.05 228.69 False None None False None False 333670.1445 0 3462003 123429 None 12.12.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-100, SL NO-12.13.1 Sqm 130593.9 130593.9 0.71 False None None False None False 92721.669 0 3462004 123429 None 12.93.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 125mm (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-111, SL NO-12.93.2 m 1009.7 1009.7 114.0 False None None False None False 115105.8 0 3462005 123429 None 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-112, SL NO-12.94.1 Sqm 4605.78 4605.78 35.91 False None None False None False 165393.5598 0 3462006 123429 None 12.90,vol-2 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor TPs shall not be made). (RATE INCLUDING GST 18 PERCENT). ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-110, SL NO-12.90 Sqm 8899.65 8899.65 63.0 False None None False None False 560677.95 0 3462007 123429 None 11.11.1,vol-2 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded ston aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-78, SL NO-11.11.1 Kg 195.6 195.6 81.42 False None None False None False 15925.752 0 3462008 123429 None 12.57.2,vol-2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick one side teak and one side commercial. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-105, SL NO-12.57.2 Sqm 4616.35 4616.35 26.25 False None None False None False 121179.1875 0 3462009 123429 None 11.34A,vol-2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-86, SL NO-11.34A Kg 222.03 222.03 1816.5 False None None False None False 403317.495 0 3462010 123429 None 8.1.2,vol-2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.1.2 Sqm 318.51 318.51 1315.92 False None None False None False 419133.6792 0 3462011 123429 None 8.2.1,vol-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.2.1 Sqm 389.87 389.87 850.51 False None None False None False 331588.3337 0 3462012 123429 None 8.10,vol-2 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-43, SL NO-8.10 Sqm 278.86 278.86 1169.54 False None None False None False 326137.9244 0 3462013 123429 None 8.51,vol-2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-50, SL NO-8.51 Sqm 132.16 132.16 2469.48 False None None False None False 326366.4768 0 3462014 123429 None 8.1.2,vol-2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.1.2 Sqm 318.51 318.51 571.72 False None None False None False 182098.5372 0 3462015 123429 None 8.54.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-50, SL NO-8.54.2 Sqm 145.38 145.38 2469.48 False None None False None False 359013.0024 0 3462016 123429 None 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-46, SL NO-8.31 Sqm 235.24 235.24 850.51 False None None False None False 200073.9724 0 3462017 123429 None 9.32,vol-2 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-64, SL NO-9.32 Sqm 3412.37 3412.37 54.69 False None None False None False 186622.5153 0 3462018 123429 None 10.2,vol-2 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.(HALF NOSING). (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-69, SL NO-10.2 m 433.48 433.48 36.0 False None None False None False 15605.28 0 3462019 123429 None 11.28,vol-2 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-85, SL NO-11.28 Kg 746.71 746.71 91.52 False None None False None False 68338.8992 0 3462020 123429 None 9.39,vol-2 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-65, SL NO-9.39 Sqm 1915.0 1915.0 336.75 False None None False None False 644876.25 0 3462021 123429 None 9.9,vol-2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-60, SL NO-9.9 Sqm 1422.04 1422.04 88.37 False None None False None False 125665.6748 0 3462022 123429 None 9.24,vol-2 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-63, SL NO-9.24 Sqm 3769.2 3769.2 700.57 False None None False None False 2640588.444 0 3462023 123429 None 15.2,vol-2 Providing and laying water proofing treatment with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-149, SL NO-15.2 Sqm 974.02 974.02 116.02 False None None False None False 113005.8004 0 3462024 123429 None 7.18,vol-2 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-23, SL NO-7.18 Cum 2665.67 2665.67 23.77 False None None False None False 63362.9759 0 3462025 123429 None 2.1.4,vol-1 Providing and laying in position cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-15, SL NO-2.1.4 Cum 8380.71 8380.71 8.28 False None None False None False 69392.2788 0 1720229908000 0 None None Buildings TERRACE 2388882.74 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3462026 123430 None 6.33,vol-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-17, SL NO-6.33 Sqm 1626.89 1626.89 245.54 False None None False None False 399466.5706 0 3462027 123430 None 2.5.2,vol-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-17, SL NO-2.5.2 Cum 9285.95 9285.95 8.92 False None None False None False 82830.674 0 3462028 123430 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 4521.85 4521.85 5.25 False None None False None False 23739.7125 0 3462029 123430 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 5426.23 5426.23 3.67 False None None False None False 19914.2641 0 3462030 123430 None 2.11a,vol-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-18, SL NO-2.11a t 118226.37 118226.37 1.07 False None None False None False 126502.2159 0 3462031 123430 None 12.13.1,vol-2 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-100, SL NO-12.13.1 Cum 130593.9 130593.9 0.11 False None None False None False 14365.329 0 3462032 123430 None 12.57.2,vol-2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick one side teak and one side commercial. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-105, SL NO-12.57.2 Sqm 4616.35 4616.35 2.2 False None None False None False 10155.97 0 3462033 123430 None 8.1.2,vol-2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.1.2 Sqm 318.51 318.51 55.5 False None None False None False 17677.305 0 3462034 123430 None 8.16,vol-2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-43, SL NO-8.16 m 44.93 44.93 96.0 False None None False None False 4313.28 0 3462035 123430 None 8.2.1,vol-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-41, SL NO-8.2.1 Sqm 389.87 389.87 435.78 False None None False None False 169897.5486 0 3462036 123430 None 8.10,vol-2 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-43, SL NO-8.10 Sqm 278.86 278.86 35.0 False None None False None False 9760.1 0 3462037 123430 None 8.51,vol-2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-50, SL NO-8.51 Sqm 132.16 132.16 92.6 False None None False None False 12238.016 0 3462038 123430 None 8.54.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-50, SL NO-8.54.2 Sqm 145.38 145.38 92.6 False None None False None False 13462.188 0 3462039 123430 None 8.31,vol-2 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-46, SL NO-8.31 Sqm 235.24 235.24 435.78 False None None False None False 102512.8872 0 3462040 123430 None 2.1.4,vol-1 Providing and laying in position cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-15, SL NO-2.1.4 Cum 8751.46 8751.46 70.7 False None None False None False 618728.222 0 3462041 123430 None 15.1,vol-2 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-149, SL NO-15.1 Sqm 1079.75 1079.75 706.94 False None None False None False 763318.465 0 1720229908000 0 None None Buildings WATER AND SANITORY 3798354.74 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3462042 123431 None 1.14.1,vol-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-8, SL NO-1.14.1 Cum 134.8 134.8 201.82 False None None False None False 27205.336 0 3462043 123431 None 2.1.3,vol-1 Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-15, SL NO-2.1.3 Cum 7915.06 7915.06 11.35 False None None False None False 89835.931 0 3462044 123431 None 2.4.3,vol-1 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-15, SL NO-2.4.3 Cum 8373.66 8373.66 45.67 False None None False None False 382425.0522 0 3462045 123431 None pg-111,vol-1 Additionalities for Formwork, centring, & Scaffolding for sub structure. ncluding cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. (RATE INCLUDING GST 18 PERCENT) ITEM SPEC NO: PWD SR, 2023-24, VOL-1, PG NO-111 Cum 4183.83 4183.83 31.27 False None None False None False 130828.3641 0 3462046 123431 None 2.11a,vol-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-1, PG NO-18, SL NO-2.11a Cum 118226.37 118226.37 4.57 False None None False None False 540294.5109 0 3462047 123431 None 15.7,vol-2 Integral Crystalline Water Proofing Admixture, Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel reinforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis). (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-150, SL NO-15.7 Cum 812.78 812.78 45.67 False None None False None False 37119.6626 0 3462048 123431 None 14.3.1,vol-2 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, includingpainting of fittings and brackets, cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-131, SL NO-14.3.1 Nos 7899.2 7899.2 14.0 False None None False None False 110588.8 0 3462049 123431 None 14.1.1,vol-2 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (RATE INCLUDING GST 18 PERCENT)" ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-131, SL NO-14.1.1 Nos 6454.69 6454.69 12.0 False None None False None False 77456.28 0 3462050 123431 None 14.23,vol-2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-135, SL NO-14.23 Nos 1525.13 1525.13 24.0 False None None False None False 36603.12 0 3462051 123431 None 14.7.2,vol-2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-132, SL NO-14.7.2 Nos 3384.62 3384.62 20.0 False None None False None False 67692.4 0 3462052 123431 None 14.16a Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-132, SL NO-14.16a Nos 359.48 359.48 26.0 False None None False None False 9346.48 0 3462053 123431 None 14.52,vol-2 Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class -Economy (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-139, SL NO-14.52 Nos 792.96 792.96 26.0 False None None False None False 20616.96 0 3462054 123431 None 13.12,vol-2 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-119, SL NO-13.12 Nos 839.22 839.22 32.0 False None None False None False 26855.04 0 3462055 123431 None 14.60,vol-2 Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class-Economy. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-140, SL NO-14.60 Nos 5266.58 5266.58 14.0 False None None False None False 73732.12 0 3462056 123431 None 13.9.1,vol-2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-118, SL NO-13.9.1 Nos 339.65 339.65 14.0 False None None False None False 4755.1 0 3462057 123431 None 13.3.1,vol-2 Providing and fixing brass stop cock of approved quality : :15mm nominal bore ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-118, SL NO-13.3.1 Nos 395.16 395.16 24.0 False None None False None False 9483.84 0 3462058 123431 None 13.6,vol-2 Providing and fixing PVC (S.W.R) P Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete - P trap (RATE INCLUDING GST 18 PERCENT)" ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-127, SL NO-13.6 Nos 408.37 408.37 44.0 False None None False None False 17968.28 0 3462059 123431 None sl-735,vol-2 S.C.I. gully or nahani grating 100 mm dia. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-A34, SL NO-735 Nos 42.29 42.29 44.0 False None None False None False 1860.76 0 3462060 123431 None 14.89a,vol-2 Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class-Economy. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-144, SL NO-14.89.A Nos 1667.86 1667.86 50.0 False None None False None False 83393.0 0 3462061 123431 None 14.32.1,vol-2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm dia. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-136, SL NO-14.32.1 Nos 1437.9 1437.9 14.0 False None None False None False 20130.6 0 3462062 123431 None 14.22a,vol-2 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.(RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-135, SL NO-14.22.A Nos 1070.5 1070.5 14.0 False None None False None False 14987.0 0 3462063 123431 None 13.34,vol-2 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-123, SL NO-13.34 Ltr 11.89 11.89 10000.0 False None None False None False 118900.0 0 3462064 123431 None 11.2,vol-2 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-77, SL NO-11.2 Kg 149.34 149.34 2043.35 False None None False None False 305153.889 0 3462065 123431 None 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia pipes. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-122, SL NO-13.32.3 m 630.4 630.4 500.0 False None None False None False 315200.0 0 3462066 123431 None 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-122, SL NO-13.32.2 m 500.89 500.89 350.0 False None None False None False 175311.5 0 3462067 123431 None 13.33.5,vol-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: PWD SR, 2023-24, VOL-2, PG NO-123, SL NO-13.33.5 m 630.4 630.4 350.0 False None None False None False 220640.0 0 3462068 123431 None 10.14.10,vol-5 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.90mm(weight of pipe -1.313 kg) (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: BWSSB SR, 2023-24, VOL-5, PG NO-120, SL NO-10.14.10 m 340.97 340.97 300.0 False None None False None False 102291.0 0 3462069 123431 None 10.14.11,vol-5 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. Complete.110mm(weight of pipe -1.8 kg) (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: BWSSB SR, 2023-24, VOL-5, PG NO-120, SL NO-10.14.11 m 473.13 473.13 500.0 False None None False None False 236565.0 0 3462070 123431 None 10.14.14,vol-5 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.200mm(weight of pipe -6.233 kg) (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: BWSSB SR, 2023-24, VOL-5, PG NO-120, SL NO-10.14.14 m 1277.99 1277.99 200.0 False None None False None False 255598.0 0 3462071 123431 None 10.14.13,vol-5 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.160mm(weight of pipe -3.923 kg) (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: BWSSB SR, 2023-24, VOL-5, PG NO-120, SL NO-10.14.13 m 853.75 853.75 200.0 False None None False None False 170750.0 0 3462072 123431 None 16.9,vol-5 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. (RATE INCLUDING GST 18 PERCENT). ITEM SPECIFICATION NO: BWSSB SR, 2023-24, VOL-5, PG NO-191, SL NO-16.9 Nos 7208.01 7208.01 14.0 False None None False None False 100912.14 0 3462073 123431 None 17.14,vol-2 Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 @ 6kg/ m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. (RATE INCLUDING GST 18 PERCENT) ITEM SPECIFICATION NO: BWSSB SR, 2023-24, VOL-2, PG NO-177, SL NO-17.14 Sqm 1546.27 1546.27 8.96 False None None False None False 13854.5792 0 1720229908000 0 None None Buildings ELECTRICAL WORK 7586942.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3462074 123432 None vol-6-1 Concealed Conduit System Supplying heavy PVC condiuit pipe ……mm dia ......mm thick confirming to IS 2509 woth suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary.(Vol-6 P.No 2 SL No 1.2.2) 25mm dia 2mm thick Mtr 103.08 103.08 4800.0 False None None False None False 494784.0 0 3462075 123432 None vol-6-2 Concealed Conduit System Supplying heavy PVC condiuit pipe ……mm dia ......mm thick confirming to IS 2509 woth suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary.(Vol-6 P.No 2 SL No 1.2.3) 32mm dia 2.5mm thick Mtr 136.12 136.12 2800.0 False None None False None False 381136.0 0 3462076 123432 None vol-6-3 Supplying heavy gauge PVC Conduit Pipe ….dia …..mm thick with suitable size bends, metal junction boxes adhesive paste etx., by groove cutting in the wall and fixing by using U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. (Vol-6 P.No 2 SL No 1.3.2) 25mm dia 2mm thick Mtr 104.41 104.41 2000.0 False None None False None False 208820.0 0 3462077 123432 None vol-6-4 Supplying heavy gauge PVC Conduit Pipe ….dia …..mm thick with suitable size bends, metal junction boxes adhesive paste etx., by groove cutting in the wall and fixing by using U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. (Vol-6 P.No 2 SL No 1.3.3) 32mm dia 2.5mm thick Mtr 130.84 130.84 400.0 False None None False None False 52336.0 0 3462078 123432 None vol-6-5 Supplyin and Fixing Metal Fan Box with Round Hook.(Vol-6 P.No 4 SL No 1.12) No 211.46 211.46 144.0 False None None False None False 30450.24 0 3462079 123432 None vol-6-6 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5 Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose lenght in a wood/PVC round block. complete for each outlet.(Vol-6 P.No 5 SL No 2.2.1) Short point up to 3Mtr from tapping point to out let via switch Point 355.51 355.51 290.0 False None None False None False 103097.9 0 3462080 123432 None vol-6-7 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5 Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose lenght in a wood/PVC round block. complete for each outlet.(Vol-6 P.No 5 SL No 2.2.2) Medium point above 3mtr up to 6Mtr from tapping point to out let via switch Point 500.89 500.89 305.0 False None None False None False 152771.45 0 3462081 123432 None vol-6-8 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5 Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose lenght in a wood/PVC round block. complete for each outlet.(Vol-6 P.No 5 SL No 2.2.3) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box Point 733.49 733.49 350.0 False None None False None False 256721.5 0 3462082 123432 None vol-6-9 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments (Vol-6 P.No5 SL No 2.3.1) 1 mm2 Mtr 25.11 25.11 6000.0 False None None False None False 150660.0 0 3462083 123432 None vol-6-10 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments (Vol-6 P.No5 SL No 2.3.2) 1.5 mm2 Mtr 34.36 34.36 6500.0 False None None False None False 223340.0 0 3462084 123432 None vol-6-11 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments (Vol-6 P.No5 SL No 2.3.3) 2.5 mm2 Mtr 55.51 55.51 13000.0 False None None False None False 721630.0 0 3462085 123432 None vol-6-12 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments . (Vol-6 P.No5 SL No2.3.4)4 mm2 Mtr 83.26 83.26 5400.0 False None None False None False 449604.0 0 3462086 123432 None vol-6-13 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments . (Vol-6 P.No5 SL No2.3.5)6 mm2 Mtr 121.59 121.59 4200.0 False None None False None False 510678.0 0 3462087 123432 None vol-6-14 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Vol-6 P.No 8 SL No 3.4.1 ) 1-2 Way Each 182.38 182.38 40.0 False None None False None False 7295.2 0 3462088 123432 None vol-6-15 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Vol-6 P.No 8 SL No 3.4.5 ) 8 Way Each 344.94 344.94 220.0 False None None False None False 75886.8 0 3462089 123432 None vol-6-16 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Vol-6 P.No 8 SL No 3.4.6)10-12Way Each 421.59 421.59 65.0 False None None False None False 27403.35 0 3462090 123432 None vol-6-17 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(Vol-6 P.No 8 SL No 3.5.3) 1 to 2 Module Each 181.06 181.06 40.0 False None None False None False 7242.4 0 3462091 123432 None vol-6-18 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(Vol-6 P.No 8 SL No 3.5.5) 8 Module Each 375.33 375.33 220.0 False None None False None False 82572.6 0 3462092 123432 None vol-6-19 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(Vol-6 P.No 8 SL No 3.5.6)10-12Moudule Each 454.63 454.63 65.0 False None None False None False 29550.95 0 3462093 123432 None vol-6-20 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293. (Vol-6 P.No 9 SL No 3.6.1) 6Amps one way. Each 134.8 134.8 1064.0 False None None False None False 143427.2 0 3462094 123432 None vol-6-21 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293. (Vol-6 P.No 9 SL No 3.6.2) 6Amps Two way Switch Each 219.39 219.39 6.0 False None None False None False 1316.34 0 3462095 123432 None vol-6-22 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293 (Vol-6 P.No 9 SL No 3.6.3)6A Three Way socket Each 225.99 225.99 320.0 False None None False None False 72316.8 0 3462096 123432 None vol-6-23 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293 (Vol-6 Vol-6 P.No 9 SL No 3.6.4) Stepped Fan Regulator Two Module Each 471.81 471.81 144.0 False None None False None False 67940.64 0 3462097 123432 None vol-6-24 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293 (Vol-6 P.No 9 SL No 3.6.9) 32A DP Switch Each 430.84 430.84 24.0 False None None False None False 10340.16 0 3462098 123432 None vol-6-25 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293 (Vol-6 P.No 9 SL No3.6.10) 6/16A Universal Socket Each 311.9 311.9 24.0 False None None False None False 7485.6 0 3462099 123432 None vol-6-26 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.(Vol-6 P.No 9 SL No3.8) 6/16A Universal Socket cm 0.54 0.54 10000.0 False None None False None False 5400.0 0 3462100 123432 None vol-6-27 Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contractors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 volts 3 phase and wired after fixing to the existing wooden board for motor. .( Vol-6 P.No14/5.2.1 ) Upto 12.5 HP Each 9852.53 9852.53 1.0 False None None False None False 9852.53 0 3462101 123432 None vol-6-28 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 125Amps ( Vol-6 P.No15/5.12.3 ) Each 16287.4 16287.4 1.0 False None None False None False 16287.4 0 3462102 123432 None vol-6-29 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- icrcuit/Over Load. ForMicroprocessor MCCBS Facility for segregating Priority andNon-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between frontcover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all thepoles simultaneously and they shall have a single mechanism. (Vol-6 P.No 17 SL No 5.15.9) FOUR POLE 100Amps 25kA Each 11216.42 11216.42 1.0 False None None False None False 11216.42 0 3462103 123432 None vol-6-30 Supplying and fixing of Shunt trip suitable for MCCB.CBCT (Vol-6 P.No 17 SL No 5.16) Each 2250.68 2250.68 1.0 False None None False None False 2250.68 0 3462104 123432 None vol-6-31 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board.(Vol-6 P.No 18 SL No 5.21) Each 12231.41 12231.41 1.0 False None None False None False 12231.41 0 3462105 123432 None vol-6-32 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. (Vol-6 P.No 17 SL No 5.18.4)6-32 Amps DP Each 976.66 976.66 30.0 False None None False None False 29299.8 0 3462106 123432 None vol-6-33 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. (Vol-6 P.No 18 SL No 5.18.9)50-63 Amps TPN Each 4081.1 4081.1 8.0 False None None False None False 32648.8 0 3462107 123432 None vol-6-34 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 Amps 4 pole (Vol-6 P.No 18 SL No5.20.8) Each 6802.28 6802.28 8.0 False None None False None False 54418.24 0 3462108 123432 None vol-6-35 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter..(Vol-6 P.No 19 SL No 5.35) Each 7539.73 7539.73 2.0 False None None False None False 15079.46 0 3462109 123432 None vol-6-36 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy (Vol-6 P.No 19 SL No 5.33) Each 12310.7 12310.7 1.0 False None None False None False 12310.7 0 3462110 123432 None vol-6-37 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. (Vol-6 P.No 19SL No 5.34) Each 742.74 742.74 8.0 False None None False None False 5941.92 0 3462111 123432 None vol-6-38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (Vol-6 P.No 14 SL No 5.38) Each 680.62 680.62 3.0 False None None False None False 2041.86 0 3462112 123432 None vol-6-39 Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.250Amps 4x30x10mm Aluminium Strips (Vol-6 P.No18 SL No 5.40.2) Mtr 4539.7 4539.7 1.0 False None None False None False 4539.7 0 3462113 123432 None vol-6-40 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm(Vol-6 P.No 19 SL No 5.41.2) Mtr 522.03 522.03 5.0 False None None False None False 2610.15 0 3462114 123432 None vol-6-41 Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.18SWG(Vol-6 P.No 19 SL No 5.42.3) cm 0.5 0.5 110000.0 False None None False None False 55000.0 0 3462115 123432 None vol-6-42 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia(Vol-6 P.No 54 SL No 12.57) No 4638.82 4638.82 8.0 False None None False None False 37110.56 0 3462116 123432 None vol-6-43 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.(Vol-6 P.No 54 SL No 12.57) No 5624.73 5624.73 8.0 False None None False None False 44997.84 0 3462117 123432 None vol-6-44 GI/Copper strips for grounding connections, using necessary fixing materials as required. (Vol-6 P.No 54 SL No 12.58.2)2 x 3 mm GI Strip Mtr 169.16 169.16 160.0 False None None False None False 27065.6 0 3462118 123432 None vol-6-45 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300mm)(Vol-6 P.No 30 SL No 6.2.1) Each 3923.83 3923.83 24.0 False None None False None False 94171.92 0 3462119 123432 None vol-6-46 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.(30/6.3.2)56" Sweep (1200mm) Each 4005.77 4005.77 144.0 False None None False None False 576830.88 0 3462120 123432 None vol-6-47 Supplying of ....... feet - LED PVC Square Batten ..W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V 50Hz & Power factor 0.9 along with CE approved. 5 years Warranty against any manufacturing defect working under standard electrical condition ( Vol-6 P.No 43 SL No11.3.2)LED light fitting 1 x 4 - 20/22 W Each 911.9 911.9 380.0 False None None False None False 346522.0 0 3462121 123432 None vol-6-48 Supplying of ....... feet - LED PVC Square Batten ..W with high quality diffuser with Life of 25000 burning hours and 70 lumen maintenance with CRI 80. Power Input: 220-240V 50Hz Power factor 0.9 along with CE approved. 5 years Warranty against any manufacturing defect working under standard electrical condition (Vol6 P.No 43 SL No 11.3.1)LED light fighting 1x 2 9/10 w Each 728.2 728.2 24.0 False None None False None False 17476.8 0 3462122 123432 None vol-6-49 Supplying of recess mounting non integral type ...'LED ...... W luminaire comprising of pressure decast/extruded aluminum housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70. efficasy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Complaince to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI acredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light.LED modular down light 2'x2' 36 W(Vol-6 P.No 45 SL No 11.6.2) Nos 6017.24 6017.24 12.0 False None None False None False 72206.88 0 3462123 123432 None vol-6-50 Fixing all types and all capacities of fluorescent /False ceiling/spot light /CFL/LED fittings indoor on the wall/ ceiling/rafters/girders using 23/0.0076' twin twisted PVC insulated wires, required Nos of round blocks and clamps. (Vol-6 P.No 56 SL No 13.7.1)On wall / ceiling /Rafter / Girders Each 161.24 161.24 416.0 False None None False None False 67075.84 0 3462124 123432 None sl51 Fixing a Ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook wisth fan regulator to the existing board together wisth wupplying and fixing 5amps. Ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. (Vol-6 P.No 57 SL No 13.10) Each 225.99 225.99 144.0 False None None False None False 32542.56 0 3462125 123432 None sl52 Extra length of GI pipe of class B 19mm dia for down rod. (Vol-6 P.No 57 SL No 13.12) Mtr 260.36 260.36 144.0 False None None False None False 37491.84 0 3462126 123432 None sl53 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with ufficient length of 23 / 0.0076 inch PVC insulated twin core wire.(Vol-6 P.No 57 SL No 13.14) Each 650.23 650.23 24.0 False None None False None False 15605.52 0 3462127 123432 None sl54 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (ESCOM P.No.13/ SL No 210/ 32.14) 95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) Km 493240.94 493240.94 0.12 False None None False None False 59188.9128 0 3462128 123432 None sl55 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm (ESCOM P.No 52/SL No 175/21.06) Km 41153.3 41153.3 0.12 False None None False None False 4938.396 0 3462129 123432 None sl56 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works,as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatlydressed disposing off or leveling the excavated stuff or sorting & stacking theselected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work (Vol I P.No 79 SL No 1.5.1) In ordinary/soft rock without blasting upto 1.5 m depth (0.5*0.75*100 LT and 40 HT) cm 514.1 514.1 77.5 False None None False None False 39842.75 0 3462130 123432 None sl57 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete.(Vol -5 Water Supply P.No 128 SL No 11.3.6) Heavy Duty GI pipe of 50mm dia Mtr 897.37 897.37 20.0 False None None False None False 17947.4 0 3462131 123432 None sl58 Brass Cable Gland 45 mm (Vol 6 P.No 28 SL No 510/63.04) Each 260.36 260.36 4.0 False None None False None False 1041.44 0 3462132 123432 None sl59 Heavy Duty Copper Terminal Long Barrel 95 Sqmm Copper Terminal, Apprx Wt: 58 Gm (Vol 6 P.No 28 SL No.26/461/59.05) Each 170.49 170.49 12.0 False None None False None False 2045.88 0 3462133 123432 None sl60 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) (V-6 ESCOM P.No 15/258/36.05) Km 1175782.58 1175782.58 0.05 False None None False None False 58789.129 0 3462134 123432 None sl61 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 3x95 to 150 Sqmm (V-6 ESCOM P.No 52/21-01) Km 81043.16 81043.16 0.05 False None None False None False 4052.158 0 3462135 123432 None sl62 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x240 Sqmm (V-6 ESCOM P.No 20/346/45.04) Each 4948.07 4948.07 2.0 False None None False None False 9896.14 0 3462136 123432 None sl63 Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3x240 Sqmm (V-6 ESCOM P.No 21/355/45.13) Each 5254.68 5254.68 2.0 False None None False None False 10509.36 0 3462137 123432 None sl64 Fixing of Termination Kit (V-6 ESCOM P.No 55/246/25.05) No 502.21 502.21 4.0 False None None False None False 2008.84 0 3462138 123432 None sl65 Distribution Transformer - 3 Phase, 11kV/433V - Amorphous Core with Oil as per IS-1180 (Part-1): 2014 B. CABLE ENTRY TYPE. (V-6 ESCOM P.No 8/112/ 13.07)63 kVA, Aluminium Wdg, Star 2 (5 Star) Each 225022.22 225022.22 1.0 False None None False None False 225022.22 0 3462139 123432 None sl66 Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Poleincluding fixing of Structure Materials, Erection of Poles etc., complete for mounting of Transformer as per approved drawing (V-6 ESCOM P.No 44/338/3.01) For 100 to 250 kVA Each 7566.16 7566.16 1.0 False None None False None False 7566.16 0 3462140 123432 None sl67 Spiral Earth Electrode (V-6 ESCOM P.No 26/2.16) No 315.86 315.86 3.0 False None None False None False 947.58 0 3462141 123432 None sl68 Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr (V-6 ESCOM P.No 23/394/52.01) Each 683.27 683.27 3.0 False None None False None False 2049.81 0 3462142 123432 None sl69 LT Distribution Box for 100 kVA DTC with MCCB's (Sheet Metal)(Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018)(V-6 ESCOM P.No 9/134/ 18.01) Each 29981.82 29981.82 1.0 False None None False None False 29981.82 0 3462143 123432 None sl70 LT Protection Kit(Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018) (V-6 ESCOM P.No 9/133/17.01) No 2673.6 2673.6 1.0 False None None False None False 2673.6 0 3462144 123432 None sl71 Fixing of LT Protection Kit ((V-6 ESCOM P.No 49/115/15.03) No 470.49 470.49 1.0 False None None False None False 470.49 0 3462145 123432 None sl72 RCC Pole - 9 Mtr Long, 145 Kg WL (V-6 ESCOM P.No 3/ 1/1.01) No 9351.64 9351.64 4.0 False None None False None False 37406.56 0 3462146 123432 None sl73 Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth(V-6 ESCOM P.No 44/ 30/2.02) No 1470.94 1470.94 4.0 False None None False None False 5883.76 0 3462147 123432 None sl74 Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977 (V-6 ESCOM P.No 9/144/21.05) For 100/300 kVA 4/5 Star Rated Transformer on PSCC Pole - 9 Mtr Long, 300 Kg WL - MS No 29771.68 29771.68 1.0 False None None False None False 29771.68 0 3462148 123432 None sl75 Labour For DP TC Set (V-6 ESCOM P.No 44/39/3.02) No 7880.7 7880.7 1.0 False None None False None False 7880.7 0 3462149 123432 None sl76 11 kV, Horizontal Cross Arm (V-6 ESCOM P.No 3/12.2.02) No 643.62 643.62 4.0 False None None False None False 2574.48 0 3462150 123432 None sl77 Labour for Horizontal Cross Arm (V-6 ESCOM P.No 45/52/5.04) No 211.46 211.46 4.0 False None None False None False 845.84 0 3462151 123432 None sl78 11 kV, 5 KN Composite/Polymeric Pin Insulator (24 mm Dia FRP Rod) (V-6 ESCOM P.No 5/52.6.06) No 270.93 270.93 12.0 False None None False None False 3251.16 0 3462152 123432 None sl79 11 kV, 45 kN Polymeric Insulator (V-6 ESCOM P.No 5/ 56/6.10) No 245.82 245.82 12.0 False None None False None False 2949.84 0 3462153 123432 None sl80 Guy Set Complete with No. 15 Strain Insulator ((CDS-1) Set 1546.27 1546.27 4.0 False None None False None False 6185.08 0 3462154 123432 None sl81 Labour for Guy Set (CDS-1) Set 783.71 783.71 4.0 False None None False None False 3134.84 0 3462155 123432 None sl82 GOS Set 200 Amps Single break (V-6 ESCOM P.No 11/166/24.01) Set 12489.12 12489.12 1.0 False None None False None False 12489.12 0 3462156 123432 None sl83 Labour for GOS Set(V-6 ESCOM P.No 48/97/13.02) No 1459.05 1459.05 1.0 False None None False None False 1459.05 0 3462157 123432 None sl84 H-Frame for mounting GOS (CDS-15) No 5725.17 5725.17 1.0 False None None False None False 5725.17 0 3462158 123432 None sl85 Labour for H-Frame (CDS-15) No 426.88 426.88 1.0 False None None False None False 426.88 0 3462159 123432 None sl86 DOLO Cut Out (V-6 ESCOM P.No 12/25.02) No 5604.91 5604.91 1.0 False None None False None False 5604.91 0 3462160 123432 None sl87 Labour (V-6 ESCOM P.No 48/96/13.01) No 313.22 313.22 1.0 False None None False None False 313.22 0 3462161 123432 None sl88 Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02) Km 61102.85 61102.85 0.5 False None None False None False 30551.425 0 3462162 123432 None sl89 Labour ACSR (V-6 ESCOM P.No 46, I.No 67/7.02) Km 6915.93 6915.93 0.5 False None None False None False 3457.965 0 3462163 123432 None sl90 Construction of platform with size stone, cement concert for erection of 500 kVA Transformer/Metering cubicle/Heavy Equipment.Construction of platform (1.5x1.5x1.2) Mtr in size stone, for erection of transformers/Heavy equipment including all materials, labour. Excavation of (1.5x1.5x1) Mtr pit for foundation providing and laying cement concrete 1:4:8 for foundation laid in 10 cm thick layers, well compacted curing etc., complete providing and construction of stone masonary 0.9 Mtr below ground level and 1.2 Mtr above ground level neatly hammer dressed in cement morter 1:6. Providing and Laying cement concrete slab 1.5x1.5x0.10 Mtr with cement concrete of 1:2:4 mix forming & cutting complete, providing pointing to stone masonary in cement morter 1:3 after racking joint & nisely lining curing etc., plastering the concrete surfaces in cement morter 1:4 including smooth randering curing etc., curing at every stages completely.(CESC SR 2021-22 P.N.2/ 61/ 4.06) Cum 40125.1 40125.1 2.0 False None None False None False 80250.2 0 3462164 123432 None vol-6-91 40mm downsize (V-1 P. A-38/7) (7.5x11.5x0.1) Cum 1572.7 1572.7 10.0 False None None False None False 15727.0 0 3462165 123432 None vol-6-92 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineerin- charge. (Made of G.I. wire of dia 4 mm)(Civil SR V-II 95/11.58) Sqm 1061.24 1061.24 70.0 False None None False None False 74286.8 0 3462166 123432 None vol-6-93 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitr ed, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications /and as per directions of the Engineer-in-Charge. (Civil Sr V-I 82/11.15.1) Kg 169.16 169.16 70.0 False None None False None False 11841.2 0 3462167 123432 None vol-6-94 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per pecifications,as per necessary ammendments and instructions of engineer incharge of work. 7.50 HP - 90 LPM @ 165 m = 16 STG Outlet Dia - 2.00 ( Vol -5 Water Supply SR 151/13.15.7 ) Each 53934.5 53934.5 1.0 False None None False None False 53934.5 0 3462168 123432 None vol-6-95 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100Volts with specified IS-694:1990 & confirming to the attached GTP of GROUP-A( Vol-6 P.No7/2.6.1) 3C X 2.5Sq.mm m 154.63 154.63 60.0 False None None False None False 9277.8 0 3462169 123432 None vol-6-96 Supply of LED Streetlight with pressure die cast aluminium housing body with optimal heat sink for better thermal dissipation. Diffuser with Injection moulded is made of polycarbonate material with high transmission index, delivering superior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%. CCT 5500K, IP 66 LED Light fixture with .W System Power consumption. LED Efficiency130lm/w at 1W & Fixture Efficiency 80lm/w with nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 5 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source. Suitable for B1/B2 Roads as per IS 1944 Part I & Part II. ( Vol-6 P.No 46 SL No 11.8.4) LED Streetlight 90watts Each 11709.38 11709.38 12.0 False None None False None False 140512.56 0 3462170 123432 None vol-6-97 Supplying and Fixing.mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts ,nuts and wiring using suitable capacity wires. (Vol-6 P.No 56 SL No 13.2.2)Using 32mm dia G.I.pipe Each 1711.41 1711.41 12.0 False None None False None False 20536.92 0 3462171 123432 None vol-6-97 Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom . mm , top. mm with 3 mm thick, suitable base plate and 4Nos of . long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.(Vol-6 P.No 11/4.2.4) 3 m - Top 70 mm and Bottom 130 mm dia Each 8326.08 8326.08 12.0 False None None False None False 99912.96 0 3462172 123432 None vol-6-97 Earth work in surface excavation for stripping, seating of bund, Road way bymeans for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock upto 300mm depth as per drawing and technical specifications, including setting out, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.(Vol-I P.No.5/1.2) (1.1*1.1*10) (Inclusive of GST ) Cum 759.92 759.92 36.3 False None None False None False 27585.096 0 3462173 123432 None vol-6-100 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. ( Vol-I P.No 15/2.1.2) Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (1*1*10)(Inclusive of GST ) Cum 7485.54 7485.54 30.0 False None None False None False 224566.2 0 3462174 123432 None vol-6-101 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes,labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Vol-I P.No: 15/2.2.1.) )(1*1*10)(Inclusive of GST ) Cum 8308.9 8308.9 30.0 False None None False None False 249267.0 0 3462175 123432 None vol-6-102 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Vol-I P.No.18/h)All other type of structures (Inclusive of GST ) t 104420.94 104420.94 0.3 False None None False None False 31326.282 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1720229913000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1720229913000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1720229913000 1 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1720229913000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1720229913000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1720383758000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1720383775000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1720383787000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. None 1720383798000 0 None None ELIGIBILITY The Tender processing fee shall not be refundable. None 1720383806000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders. None 1720383816000 0 None None ELIGIBILITY As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund. None 1720383822000 0 None None ELIGIBILITY All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval. None 1720383830000 0 None None ELIGIBILITY The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons. None 1720383840000 0 None None ELIGIBILITY In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work. None 1720383851000 0 None None ELIGIBILITY The successful Tenderer shall deliver to the Employer a Security deposit in the prescribed form in the favour of the Executive Engineer, PWD Division, Chamarajanagara, given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract. None 1720383859000 0 None None ELIGIBILITY Contractor should carryout additional test required to test the suitability of materials. None 1720383866000 0 None None ELIGIBILITY All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured according to ENVIRONMENTAL MANAGEMENT SYSTEM (EMS ISO 14001:2015) & QUALITY MANAGEMENT SYSTEM (QMS ISO 9001:2015) Policies, so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent None 1720383873000 0 None None ELIGIBILITY Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost. None 1720383883000 0 None None ELIGIBILITY Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should get tested by the quality control authority before use on the work at their own cost. None 1720383889000 0 None None ELIGIBILITY The contractors assessed available tender capacity will be calculated as per the clause 3.6 of STD tender document Attached. None 1720383895000 0 None None ELIGIBILITY All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer -in charge of this work. None 1720383904000 0 None None ELIGIBILITY All precautions should be taken by the contractor so that there are no damages to such public/ private properties. None 1720383910000 0 None None ELIGIBILITY Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client. None 1720383917000 0 None None ELIGIBILITY Contractor should follow strictly the prevailing rules of labour act. None 1720383925000 0 None None ELIGIBILITY Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public Works Department, Chamarajanagar Division, during office hours on all working days. None 1720383931000 0 None None ELIGIBILITY Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project. None 1720383939000 0 None None ELIGIBILITY Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost. None 1720383947000 0 None None ELIGIBILITY Rs 1,00,000 of the EMD should be paid through e-payment as specified in e-procurement portal and the remaining balance amount of EMD must be produced in the form of Bank Guarantee by uploading the scan copy of the Bank Guarantee. The original copy should be produced at the time of Technical Bid Opening. None 1720383953000 0 None None ELIGIBILITY The successful contractor should setup material testing laboratory at the work site before commencement of work. None 1720383959000 0 None None ELIGIBILITY The difference in cost deposited by the lowest successful tenderer (for unbalanced) along with the performance security will be released to the contractor 30 days after the completion of defects liability period. None 1720383965000 0 None None ELIGIBILITY All the uploaded documents in e-portal should be got verified at the Division office within 3 working days from the stipulated date of opening of Technical Bid by producing the original documents at the Division office, failing which the tender is liable for rejection. No separate communication will be made in this regard. None 1720383985000 0 None None ELIGIBILITY Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the bid document only. Otherwise tender is liable for rejection. None 1720383993000 0 None None ELIGIBILITY The contractor who participates in tenders for more than one work for which tenders are invited in this IFT, the tenderer must fulfill all the conditions and criteria cumulatively for the participated works. None 1720384000000 0 None None ELIGIBILITY The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4 None 1720384006000 0 None None ELIGIBILITY Price escalation shall not be considered in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. None 1720384025000 0 None None ELIGIBILITY Regarding Appealing aggrieved contractor may appeal to the prescribed (Appellant) Authority within 30 days as per KTTP and appeal should be trough eproc only as per Govt: Order No.pwd/572/CRN-2020 Bangalore Dt:09.10.2020. same will not be considered if appeal through Letters. None 1720384032000 0 None None ELIGIBILITY The returns submitted to the Income Tax Department, PROFIT & lOSS STATEMENT or 26AS COPY Shall be uploaded and shall be produced at the time of verification of Original documents at Division office None 1720384054000 0 None None ELIGIBILITY Contractors should be registered as KPWD/CPWD Class I Civil Contractor. None 1720384069000 0 None None ELIGIBILITY The time for completion of whole work is 11 Months (including rainy days) None 1720384105000 0 None None ELIGIBILITY Estimate rates are inclusive of GST. So, quote your rates including GST. GST will not be paid separately. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24 (c) Executed in any one year, ( for a continuous period of 12 months) the minimum quantities of work.1.Excavation/Embankment: 5892.23 Cum, 2.PCC/RCC: 1636.30 Cum. 3. SSM/BLOCK Masonry: 1185.61 Cum 4. TMT Steel: 142.38 Tonne 5. Flooring: 2859.46 Sqm (usually 80% of the peak annual rate of construction) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24 (b) Satisfactorily completed (at least 90% of the contract value) as prime contractor, at least one similar work such as Road work etc., of value not less than Rs.463.08 Lakhs. (usually not less than 50% estimated value of contract) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs. 37.94 Lakhs. (usually not less than 50% of the electrical works) in any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs. 18.99 Lakhs (usually not less than 50% of the water supply/sanitary engineering works) in any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Each Tenderer should further demonstrate a.Availability by owning required following key and critical equipment for this work b. the remaining can be deployed on lease, hire for all works provided, the relevant documents commitment agreements etc. for availability for this work are furnished a Machinery to be owned: 1.Tipper: 2 Nos 2.Self loading weigh batching concrete mixer: 1 No 3.Steel Centering Sheets/Scaffoldings: 2400 Sqm 4.Excavator 1 No. 5.Water Tanker 2 No. 6.Transit mixer :1 No. 7.Pin/Plate vibrator:4 No. (a)Machineries could be on Lease/Hire/Ownership:1.Tipper: 2 Nos 2.Self loading weigh batching concrete mixer: 1 No 3.Steel Centering Sheets,Scaffolding: 1000 Sqm 4.Excavator 1 No. 5.Water Tanker 1 No. 6.Transit mixer 1 No. 7.Pin/Plate vibrator 4 No. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Machinary capacity None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Technical staff pattern None None None None KPWD/CPWD Class I Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24 (a) achieved in at least two financial years a minimum financial turnover (in all classes of Civil Engineering construction works only) of Rs. 1852.31 Lakhs (usually not less than two times the estimated annual payments under this contract) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and /or availability of credit facilities of no less than Rs. 252.59 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.,NOTE:-LOC K form for the stipulated amount should be submitted in the prescribed format as in the bid document only. Otherwise tender is liable for rejection Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None List of existing commitments and ongoing works Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Format as in bid document None None None None List of works for which tenders already submitted Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Format as in bid document None None None None GST Registration Certificate Financial Status None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None BLANK Others NA. createdTs version createdDate modifiedDate documentName None None None None Others -- NA.
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate with UDIN for last 5 years True Technical Bid KPWD/CPWD Class I Registration Certificate True Technical Bid GST Registration Certificate True Technical Bid Work done certificate in support of similar nature of work done, Quqntities executed in any 12 months during last 5 years, 2019-20 to 2023-24 True Technical Bid Line of Credit/ Bankers certificate in prescribed format True Technical Bid Details of on going works and work on hand True Technical Bid Additional documents like EMD payments etc. True Technical Bid List of existing commitments and ongoing works to be completed during the next 3 months True Technical Bid Any documents which supports technical Qualification, Machinaries True Technical Bid ITR, Profit & Loss statement OR 26AS for last 5 years True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Chamarajanagara Hanuru Chamarajanagar HANUR MALE MAHADESHWARA BETTA, HANURU TALUK None None None None None None Buildings Chamarajanagara Hanuru Chamarajanagar HANUR MALE MAHADESHWARA BETTA None None None None None None Buildings Chamarajanagara Hanuru Chamarajanagar HANUR MALE MAHADESHWARA BETAA None None None None None None Buildings Chamarajanagara Hanuru Chamarajanagar HANUR MALE MALEMAHADESHWARA BETTA None None None None None None Buildings Chamarajanagara Hanuru Chamarajanagar HANUR MALE MAHADESHWARA BETTA None None None None None None Buildings Chamarajanagara Hanuru Chamarajanagar HANUR MALE MAHADESHWARA BETTA None None None None None None Buildings Chamarajanagara Hanuru Chamarajanagar HANUR MALE MAHADESHWARA BETTA None None None None None None
tenderAddress	createdTs 1720693256000 version 0 createdDate None modifiedDate None blockNumber O/O, EXECUTIVE ENGINEER, PWD, CHAMARAJANAGARA street None city CHAMARAJANAGARA state Karnataka pin 571313
tenderRecallDTO	None