| 3537338 | 127509 | None | GP1 | Providing and laying in position cement concrete for levellingcourse for all works in foundation.Thegranite/trap/basaltcrushedgraded coarse aggregatesand fine aggregatesas per relevant IS Codes machine mixed, laid in layers not exceeding 150mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of 1 machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formworkshallbepaidseparately) Mix1:4:8 (M5) Using 40mm nominal size graded crushed coarse aggregates [P.No-15,1.No-2.1.3] (PWD SR 2023-24) Volume-1 | Cum | 6288.45 | 6288.45 | 8.4 | False | None | None | False | None | False | 52822.98 | 0 |
| 3537339 | 127509 | None | GP2 | Providing 12 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. [P.No-41,I.No-8.1 | Sqm | 267.75 | 267.75 | 36.19 | False | None | None | False | None | False | 9689.8725 | 0 |
| 3537340 | 127509 | None | GP3 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.[P.No-41,I.No-8.2.2) (PWD SR 2023-SQM | Sqm | 292.95 | 292.95 | 70.39 | False | None | None | False | None | False | 20620.7505 | 0 |
| 3537341 | 127509 | None | GP4 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as per direction of Engineer in charge. ( | Sqm | 1233.75 | 1233.75 | 48.6 | False | None | None | False | None | False | 59960.25 | 0 |
| 3537342 | 127509 | None | GP5 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. [P.No-45,I.No-8.25] (PWD SR 2023-24) Volume-2 | Sqm | 143.85 | 143.85 | 110.39 | False | None | None | False | None | False | 15879.6015 | 0 |
| 3537343 | 127509 | None | GP6 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions
of required shade (Company Depot Tinted) with silicon additives, New work | Sqm | 163.8 | 163.8 | 93.79 | False | None | None | False | None | False | 15362.802 | 0 |
| 3537344 | 127509 | None | GP7 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
P.No-48,I.No-8.40] (PWD SR 2023-24) Volume-2
| Sqm | 120.75 | 120.75 | 17.11 | False | None | None | False | None | False | 2066.0325 | 0 |
| 3537345 | 127509 | None | GP8 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 1mm gap for 8 thermal expansion PVC pipe - OD 75mm diameter [P.No- 125, SI.No-13.48] (PWD SR 2023-24) | Mtr | 305.55 | 305.55 | 17.2 | False | None | None | False | None | False | 5255.46 | 0 |
| 3537346 | 127509 | None | GP9 | Supplying heavy gauge PVC Conduit piipe. dia.mm thick with suitable size bends, metal
junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (P-1, INo.- 1.3.2) (ELE SR 2023-24)
| Rmtr | 71.0 | 71.0 | 47.2 | False | None | None | False | None | False | 3351.2 | 0 |
| 3537347 | 127509 | None | GP10 | Groove cutting Extra for Groove cutting in brick wall/CC floor to the suitable depth for
concealing of conduit/GI pipe and plastering, finishing upto wall surface complete.
| Rmtr | 29.0 | 29.0 | 20.0 | False | None | None | False | None | False | 580.0 | 0 |
| 3537348 | 127509 | None | GP11 | Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. | Each | 348.0 | 348.0 | 1.8 | False | None | None | False | None | False | 626.4 | 0 |
| 3537349 | 127509 | None | gp12 | Supplying and fixing PVC/metal conduit Deep junction box (P-1, INo. 1.5) (ELE SR 2023-24)
19/20mm deep junction
| Each | 56.0 | 56.0 | 2.5 | False | None | None | False | None | False | 140.0 | 0 |
| 3537350 | 127509 | None | gp13 | Supplying and fixing "S' Hook made out of 14mm dia MS Rod (P-2, INo- 1.11) (ELE SR
2023-
| Rmtr | 52.0 | 52.0 | 8.0 | False | None | None | False | None | False | 416.0 | 0 |
| 3537351 | 127509 | None | gp14 | Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC conduit/casing capping using 2x1.5sqmm (Phase and neutral) and 1x1.00sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic 14 sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet (P-2, INo.- 2.1.1) (ELE SR 2023-24) | Point | 285.0 | 285.0 | 7.0 | False | None | None | False | None | False | 1995.0 | 0 |
| 3537352 | 127509 | None | GP15 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box (P-5, INo.-3.5.1) (ELE SR 2022-23) | Each | 234.0 | 234.0 | 5.0 | False | None | None | False | None | False | 1170.0 | 0 |
| 3537353 | 127509 | None | GP16 | Supplying and flush mounting powder coated/galvnized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC
16 wall (P-5, INo.- 3.4) (ELE SR 2023-24)
| Each | 220.0 | 220.0 | 3.0 | False | None | None | False | None | False | 660.0 | 0 |
| 3537354 | 127509 | None | GP17 | Supplying and fixing of modular switch and connected accessories on existing modular switch plate s per IS 3854 and IS 1293 (P-5, INo.- 3.6.1) (ELE SR 2023-24) | Each | 156.0 | 156.0 | 1.0 | False | None | None | False | None | False | 156.0 | 0 |
| 3537355 | 127509 | None | GP18 | Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 volts. 50Hz AC supply and completely wired on existing box (P-6, INo.-3.7) | Each | 646.0 | 646.0 | 1.0 | False | None | None | False | None | False | 646.0 | 0 |
| 3537356 | 127509 | None | GP19 | Supplying 4mm thick plastic sheet with necessary nitches for fixing switches. regulators etc., and fixing on existing wooden or metal box using NF screws. (P-6, INo.- 3.8) (ELE SR 2023-24) | Each | 0.41 | 0.41 | 10.0 | False | None | None | False | None | False | 4.1 | 0 |
| 3537357 | 127509 | None | GP20 | Supplying way plastic gang box and fixing using necessary wooden/rawl/phill plugs and screws (P-6, INo.-3.12) (ELE SR 2023-24) | Each | 2441.0 | 2441.0 | 1.0 | False | None | None | False | None | False | 2441.0 | 0 |
| 3537358 | 127509 | None | GP21 | Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. (P-6, INo-3.14) | Each | 55.0 | 55.0 | 4.0 | False | None | None | False | None | False | 220.0 | 0 |
| 3537359 | 127509 | None | GP22 | Fixing a Shunt capacitor of .KVAR capacity with necessary clamps, bolts and nuts on existing wooden or metal board including banking of more than one capacitor upto 5 kVAR (P-24, INo.- 5.4.1) (ELE SR 2023-24) | Each | 154.0 | 154.0 | 1.0 | False | None | None | False | None | False | 154.0 | 0 |
| 3537360 | 127509 | None | GP23 | Wiring for lighting/power circuit using one of PVC insulated 1100V Grade, muftis and copper conductor single core cable in open or concealed system of wiring. Using class A approved materialals. ISqmm (P.No. 3, 1. No.2.3.1) (ELE SR 2023-24) | Mtr | 53.0 | 53.0 | 30.0 | False | None | None | False | None | False | 1590.0 | 0 |
| 3537361 | 127509 | None | GP24 | Supplying and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. (P-10, INo.- 5.6.6) (ELE SR 2023-24) | Each | 326.13 | 326.13 | 1.0 | False | None | None | False | None | False | 326.13 | 0 |
| 3537362 | 127509 | None | GP25 | Supplying and fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts.bolts and washers (P-10, INo.- 5.7.1) (ELE SR 2023-24) | Each | 157.0 | 157.0 | 2.0 | False | None | None | False | None | False | 314.0 | 0 |
| 3537363 | 127509 | None | GP26 | Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCBs single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure (P- 13, INo.- 5.18.1) (ELE SR 2023-24) | Each | 415.0 | 415.0 | 1.0 | False | None | None | False | None | False | 415.0 | 0 |
| 3537364 | 127509 | None | GP27 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. single phase AC supply conforming to ISS-374-1979 and with double ball bearing system48" Sweep (1200 mm) Regular model (P-22, INo.-6.3.1) (ELE SR | Each | 2984.0 | 2984.0 | 4.0 | False | None | None | False | None | False | 11936.0 | 0 |
| 3537365 | 127509 | None | GP28 | Supplying of LED light fighting | Each | 551.0 | 551.0 | 10.0 | False | None | None | False | None | False | 5510.0 | 0 |
| 3537366 | 127509 | None | GP29 | Add GST | No | 45643.46 | 45643.46 | 1.0 | False | None | None | False | None | False | 45643.46 | 0 |
| 3537367 | 127509 | None | GP30 | Add Miscellaneous and Rounding off | No | 781.78 | 781.78 | 1.0 | False | None | None | False | None | False | 781.78 | 0 |
| 3537368 | 127509 | None | GP31 | Door and window fitting deductions building | Sqm | 371.7 | 371.7 | 105.45 | False | None | None | False | None | False | 39195.765 | 0 |