| 1720684146000 | 0 | None | None | Other Works | Repair of Dry waste Center and Construction of Platform for Vehicle Cleaning and Construction of Drain near ward no 7 Dry Waste Center In the Limit of Kotekar TP | 706379.59 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3507499 | 125543 | None | 001 | Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m.(PWD SR 2023-24 Vol 1 P.No 5.No 1.4.1) | Cum | 271.04 | 271.04 | 92.81 | False | None | None | False | None | False | 25155.2224 | 0 | | 3507500 | 125543 | None | 002 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24 Vol 1 P.No 15 I.No 2.1.3) | Cum | 6707.68 | 6707.68 | 11.51 | False | None | None | False | None | False | 77205.3968 | 0 | | 3507501 | 125543 | None | 003 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24 Vol 1 P.No 16 I.No 2.4.2) | Cum | 9560.37 | 9560.37 | 40.145 | False | None | None | False | None | False | 383801.05365 | 0 | | 3507502 | 125543 | None | 004 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures (As per SR 2023-24 Vol 1 Page no.18 slno.2.11.h ) | Tonne | 88492.32 | 88492.32 | 1.21 | False | None | None | False | None | False | 107075.7072 | 0 | | 3507503 | 125543 | None | 005 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(PWD SR 2023-24 P,No 7 INo 1.9) | Cum | 297.92 | 297.92 | 77.44 | False | None | None | False | None | False | 23070.9248 | 0 | | 3507504 | 125543 | None | 006 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD SR 2023-24 Vol 2 I.No11.16.3 Page no.83 ) | Kg | 136.64 | 136.64 | 220.16 | False | None | None | False | None | False | 30082.6624 | 0 | | 3507505 | 125543 | None | 007 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(PWD SR 2023-24 Vol 2 I.No7.39.6 Page no.26 and I,No 642 Page No A-31 ) Labour rate only | Sqm | 224.0 | 224.0 | 91.0 | False | None | None | False | None | False | 20384.0 | 0 | | 3507506 | 125543 | None | 008 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD SR 2023-24 Vol 2 I.No11.16.3 Page no.83 . I,No 532 Page No A-28 ) Labour rate only ) | Kg | 68.32 | 68.32 | 292.48 | False | None | None | False | None | False | 19982.2336 | 0 | | 3507507 | 125543 | None | 009 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make
his own arrangements for procuring water for testing) etc. complete For:140mm dia 6kg/sqcm (PWD SR 2023-24 Vol 5 I.No 10.1.8 Page no.113 ) | Mtr | 654.08 | 654.08 | 30.0 | False | None | None | False | None | False | 19622.4 | 0 |
|