| 3506860 | 125505 | None | code01 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m | Cum | 254.1 | 254.1 | 1049.0 | False | None | None | False | None | False | 266550.9 | 0 |
| 3506861 | 125505 | None | code02 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. | Cum | 2686.95 | 2686.95 | 115.06 | False | None | None | False | None | False | 309160.467 | 0 |
| 3506862 | 125505 | None | code03 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formworkshall be paid separately) Mix 1:3:6( M) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6527.85 | 6527.85 | 140.03 | False | None | None | False | None | False | 914094.8355 | 0 |
| 3506863 | 125505 | None | code04 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work - Deduct 5% per m3 if rollers are not used and tamping is done manually | Cum | 497.7 | 497.7 | 1377.0 | False | None | None | False | None | False | 685332.9 | 0 |
| 3506864 | 125505 | None | code05 | Procurement of Ingradients: Procurement of farmyard manure/compost,sand & red-earth (ingradients) required for raising seedlings inclusive of transportation , breaking of clods, seiving & heaping each ingradient separately at nursery site (Ceiling rate) (a) Red earth | Cum | 460.69 | 460.69 | 54.24 | False | None | None | False | None | False | 24987.8256 | 0 |
| 3506865 | 125505 | None | code06 | Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over
30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) | Cum | 1121.4 | 1121.4 | 767.12 | False | None | None | False | None | False | 860248.368 | 0 |
| 3506866 | 125505 | None | code07 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8376.9 | 8376.9 | 62.95 | False | None | None | False | None | False | 527325.855 | 0 |
| 3506867 | 125505 | None | code08 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent | Sqm | 2589.3 | 2589.3 | 111.83 | False | None | None | False | None | False | 289561.419 | 0 |
| 3506868 | 125505 | None | code09 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 309.75 | 309.75 | 3612.95 | False | None | None | False | None | False | 1119111.2625 | 0 |
| 3506869 | 125505 | None | code10 | Supplying and fixing M15 grade precast cement concrete Kerb stones 300x250x100 for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) | m | 318.15 | 318.15 | 63.37 | False | None | None | False | None | False | 20161.1655 | 0 |
| 3506870 | 125505 | None | code11 | Bollards - Fabricating , supplying and fixing of precast concrete bollards of 750mm height above ground and 75mm dia of Grade M30.The assembly shall be treated with Rusticised solution of approved company & applied with two coats of epoxy painting over one coat of epoxy primer to resist rusting of material (the treatment shall be given as per manufacture's specifications and certificate to that effect shall be submitted along with guarantee certificate).As per the detailed drawing and specifications attached. The work shall be carried out as per the instructions of executive engineer. | No | 1155.0 | 1155.0 | 56.0 | False | None | None | False | None | False | 64680.0 | 0 |
| 3506871 | 125505 | None | code12 | Procurement of Ingredients: Procurement of farmyard manure/compost, sandandred-earth(ingredients) required for raising seedlings inclusive of transportation, breaking of clods, sieving and heaping each ingredient separately at nursery site (Ceiling rate) Farm yard manure/compost As per Forest Nursery SR 2021-22 Item No:V8 1.4.1 Page No 5 | Cum | 1664.53 | 1664.53 | 27.12 | False | None | None | False | None | False | 45142.0536 | 0 |
| 3506872 | 125505 | None | code13 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)
M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates As per PWD SR 2023-24 Item No:V1 2.2.3 Page No 15 | Cum | 6652.8 | 6652.8 | 273.47 | False | None | None | False | None | False | 1819341.216 | 0 |
| 3506873 | 125505 | None | code14 | Providing and removing centering, shuttering, strutting, ropping etc.,and removal of form work for footing RCC works including cost of all materials, labour complete as per specifications. At 8 % of item code - 2.2.2.1 As per PWD SR 2023-24 Item No:V2 1.a Page No 111 | Cum | 532.22 | 532.22 | 55.23 | False | None | None | False | None | False | 29394.5106 | 0 |
| 3506874 | 125505 | None | code15 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates As per PWD SR 2021-22 Item No:V1 2.5.2 Page No 17 | Cum | 7185.15 | 7185.15 | 15.91 | False | None | None | False | None | False | 114315.7365 | 0 |
| 3506875 | 125505 | None | code16 | Providing and removing centering, shuttering, strutting, ropping etc.,and removal of form work for Columns RCC works including cost of all materials, labour complete as per specifications. At 70% of item code - 2.2.1 for columns | Cum | 5029.61 | 5029.61 | 4.2 | False | None | None | False | None | False | 21124.362 | 0 |
| 3506876 | 125505 | None | code17 | Providing and removing centering, shuttering, strutting, ropping etc.,and removal of form work for Beams , Lintels RCC works including cost of all materials, labour complete as per specifications. At 60% of item code - 2.2.1 for Beams and Lintels | Cum | 4311.09 | 4311.09 | 8.53 | False | None | None | False | None | False | 36773.5977 | 0 |
| 3506877 | 125505 | None | code18 | Providing and removing centering, shuttering, strutting, ropping etc.,and removal of form work for Slabs RCC works including cost of all materials, labour complete as per specifications. At 50% of itemcode 2.2.1 for Slabs | Cum | 3592.58 | 3592.58 | 3.18 | False | None | None | False | None | False | 11424.4044 | 0 |
| 3506878 | 125505 | None | code19 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately | t | 93929.85 | 93929.85 | 24.51 | False | None | None | False | None | False | 2302220.6235 | 0 |
| 3506879 | 125505 | None | code20 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5891.55 | 5891.55 | 38.39 | False | None | None | False | None | False | 226176.6045 | 0 |
| 3506880 | 125505 | None | code21 | Providing & fixing approved pattern terracota jaali blocks of size 200 mm x 200 mm , fixed over 30x10 mm size M.S.flat frame work in both direction covering each block , using tile adhesive of approved brand and make joonts finished with pigment to match the shade of the terracota block , including cost of materials,
labour, curing, complete as per specifications. | Sqm | 1000.0 | 1000.0 | 38.4 | False | None | None | False | None | False | 38400.0 | 0 |
| 3506881 | 125505 | None | code22 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | Sqm | 1202.25 | 1202.25 | 176.92 | False | None | None | False | None | False | 212702.07 | 0 |
| 3506882 | 125505 | None | code23 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 105.0 | 105.0 | 3612.95 | False | None | None | False | None | False | 379359.75 | 0 |
| 3506883 | 125505 | None | code24 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 55.65 | 55.65 | 3612.95 | False | None | None | False | None | False | 201060.6675 | 0 |
| 3506884 | 125505 | None | code25 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 186.9 | 186.9 | 3612.95 | False | None | None | False | None | False | 675260.355 | 0 |
| 3506885 | 125505 | None | code26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
-on new wood surface and / or wood based surface with enamel paint- | Sqm | 120.75 | 120.75 | 301.39 | False | None | None | False | None | False | 36392.8425 | 0 |
| 3506886 | 125505 | None | code27 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
14.10.1 Kitchen sink with drain board 510x1040 mm bowl depth 250 mm | No | 5898.9 | 5898.9 | 16.0 | False | None | None | False | None | False | 94382.4 | 0 |
| 3506887 | 125505 | None | code28 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. | No | 888.3 | 888.3 | 16.0 | False | None | None | False | None | False | 14212.8 | 0 |
| 3506888 | 125505 | None | code29 | Providing and fixing Chorinated Poly Venyle Chloride ( CPVC) pipes conforming to IS 15778, having thermal stability of hoot and cold water supply including all CPVC fittings of plain and brass threaded including fixing the pipe with 1mtr spacing. This including jointing of pipes and fittings with one step CPVC solvent cement & the coast of cutting chases & making good the same including testing of joints complete. ( Concealed work including cutting charges and good the walls etc.) 15mm dia | m | 324.45 | 324.45 | 50.0 | False | None | None | False | None | False | 16222.5 | 0 |
| 3506889 | 125505 | None | code30 | 20mm dia | m | 397.95 | 397.95 | 50.0 | False | None | None | False | None | False | 19897.5 | 0 |
| 3506890 | 125505 | None | code31 | 25mm dia | m | 500.85 | 500.85 | 50.0 | False | None | None | False | None | False | 25042.5 | 0 |
| 3506891 | 125505 | None | code32 | 30mm dia | m | 584.85 | 584.85 | 50.0 | False | None | None | False | None | False | 29242.5 | 0 |
| 3506892 | 125505 | None | code33 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia | m | 92.4 | 92.4 | 40.0 | False | None | None | False | None | False | 3696.0 | 0 |
| 3506893 | 125505 | None | code34 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | No | 1019.55 | 1019.55 | 4.0 | False | None | None | False | None | False | 4078.2 | 0 |
| 3506894 | 125505 | None | code35 | Providing and fixing to wall and floor unplasticised PVC pipes 6.00 kg / sq.cm working pressure chemp plast / wavin or eqvivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of materials, labour charges, HOM of equipments and testing complete as per speicifications. 40mm dia | m | 276.15 | 276.15 | 20.0 | False | None | None | False | None | False | 5523.0 | 0 |
| 3506895 | 125505 | None | code36 | 75mm dia | m | 421.05 | 421.05 | 250.0 | False | None | None | False | None | False | 105262.5 | 0 |
| 3506896 | 125505 | None | code37 | 110mm dia | m | 497.7 | 497.7 | 250.0 | False | None | None | False | None | False | 124425.0 | 0 |
| 3506897 | 125505 | None | code38 | Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). 10*7.5cms | No | 262.5 | 262.5 | 10.0 | False | None | None | False | None | False | 2625.0 | 0 |
| 3506898 | 125505 | None | code39 | Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). 12*7.5cms | No | 294.0 | 294.0 | 10.0 | False | None | None | False | None | False | 2940.0 | 0 |
| 3506899 | 125505 | None | code40 | Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. | No | 4592.7 | 4592.7 | 20.0 | False | None | None | False | None | False | 91854.0 | 0 |
| 3506900 | 125505 | None | code41 | Conveying the new CI or RCC machinehole frame and cover of 2 CMTS from divisional stores to the workspot and fixing the same in cement concrete and removing the old frame and cover and conveying back the old ones to stores | No | 353.85 | 353.85 | 20.0 | False | None | None | False | None | False | 7077.0 | 0 |
| 3506901 | 125505 | None | code42 | Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete | Sqm | 593.25 | 593.25 | 271.4 | False | None | None | False | None | False | 161008.05 | 0 |
| 3506902 | 125505 | None | code43 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness
for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 2764.65 | 2764.65 | 102.9 | False | None | None | False | None | False | 284482.485 | 0 |
| 3506903 | 125505 | None | code44 | Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. | Kg | 118.65 | 118.65 | 17326.59 | False | None | None | False | None | False | 2055799.9035 | 0 |
| 3506904 | 125505 | None | code45 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1375.5 | 1375.5 | 455.4 | False | None | None | False | None | False | 626402.7 | 0 |
| 3506905 | 125505 | None | code46 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1292.55 | 1292.55 | 201.6 | False | None | None | False | None | False | 260578.08 | 0 |
| 3506906 | 125505 | None | code47 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 14.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm
C.P. brass pillar taps | No | 3236.1 | 3236.1 | 20.0 | False | None | None | False | None | False | 64722.0 | 0 |
| 3506907 | 125505 | None | code48 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. | Sqm | 1732.5 | 1732.5 | 4.8 | False | None | None | False | None | False | 8316.0 | 0 |
| 3506908 | 125505 | None | code49 | Providing and removing centering, shuttering, strutting, ropping etc.,and removal of form work for footing RCC works including cost of all materials, labour complete as per specifications. At 5 % of item code - 2.2.2.1 | Cum | 332.64 | 332.64 | 92.85 | False | None | None | False | None | False | 30885.624 | 0 |
| 3506909 | 125505 | None | code50 | Providing and removing centering, shuttering, strutting, ropping etc.,and removal of form work for Cement Concrete Drain Walls/slab RCC works including cost of all materials, labour complete as per specifications. At 35% of itemcode 2.2.1 for Slabs | Cum | 2328.48 | 2328.48 | 167.65 | False | None | None | False | None | False | 390369.672 | 0 |
| 3506910 | 125505 | None | code51 | Supply and Installation of Multicell Standing Seam polycarbonate panels having flux 7.0 as per EN 16153 & EN ISO 10077-2. For min joints, panel shall be 1000 - 1200 mm wide with standing seam on both sides. Panels shall have minimum six-seven layers with truss bridge design for higher flexibility and strength. The system shall be secured using suitable connectors with double tooth grip lock locking mechanism and fixed on purlin(to be paid separately) having a pull out load of min 7000N tested as per ISO 6892-1998 and IS 1608-2005. Panels must satisfy impact test as per IS 4443-97 shall show no sign of breakage which have been exposed to UV for 500 Hours (min) as per ASTM G 155. Panels shall have Yellowness Index of not more than 15 units as per ASTM D 1925 when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. Panel shall be closed at the end with additional Aluminium U profile as required. All aluminium should be factory finished / mill finished. Panel
shall be fixed over MS structural steel / MS purlin (to be paid separately) conforming to the details in the specifications as per direction of Engineer in charge of work. 16mm Thick Multicell Polycarbonate Panel having U value of 2.1 W/m2 K (max) | Sqm | 3761.1 | 3761.1 | 51.0 | False | None | None | False | None | False | 191816.1 | 0 |
| 3506911 | 125505 | None | code52 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. Note 1. A sealing primer may be applied in advance on cement concrete pavement to ensure proper bonding. Any laitance and/or curing compound to be removed where paint is required to be applied on concrete surface. 2. Cost of painter is already included in usage charges of road marking machine. | Sqm | 556.5 | 556.5 | 36.53 | False | None | None | False | None | False | 20328.945 | 0 |
| 3506912 | 125505 | None | code53 | Cold Plastic Paint Providing and applying Cold plastic paint two component rolled on surfacing material solvent free, high build two pack seamless,tough,skid resistant, material with property of attaining 2mm thickness in single coat application white(or as required colour )based on glass and colour retaining acrylic cross linking resin system for coloured road surfacing including surface cleaning and cost of all material etc. complete. (All inclusive on bitumen or concrete surface) work shall carried out as per IRC 35-2015 clause 2.2) | Sqm | 1753.5 | 1753.5 | 97.992 | False | None | None | False | None | False | 171828.972 | 0 |
| 3506913 | 125505 | None | code54 | Tubular Marker / Spring post 450 mm (Flexible Bollards) Providing Tubular marker made up of Polyurethane used to divide opposing lanes of road users shall be fixible in nature. Tubular marker having height upto 450 mm shall be having 75 mm Reboundable work zone retroreflective sheeting as per ASTM 4956 S2 (Application of Tubular Marker shall be done as per IRC:SP 55:2014) | Each | 1147.65 | 1147.65 | 30.0 | False | None | None | False | None | False | 34429.5 | 0 |
| 3506914 | 125505 | None | code55 | Direction and Place Identification Signs with size more than 0.9 m2 size Board - roviding and erecting direction and place identification retro reflectorised sign as per IRC:67:2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area exceeding 0.9 m2 fixed over back support frame of min 40 x 40 x 5mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing | Sqm | 9460.5 | 9460.5 | 21.6 | False | None | None | False | None | False | 204346.8 | 0 |
| 3506915 | 125505 | None | code56 | Traffic Park Area Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2012.60 cm equilateral triangle | Each | 3754.8 | 3754.8 | 8.0 | False | None | None | False | None | False | 30038.4 | 0 |
| 3506916 | 125505 | None | code57 | 60 cm circular | Each | 4511.85 | 4511.85 | 3.0 | False | None | None | False | None | False | 13535.55 | 0 |
| 3506917 | 125505 | None | code58 | 60 cm x 45 cm rectangular | Each | 4435.2 | 4435.2 | 3.0 | False | None | None | False | None | False | 13305.6 | 0 |
| 3506918 | 125505 | None | code59 | 60 cm x 60 cm square | Each | 4971.75 | 4971.75 | 2.0 | False | None | None | False | None | False | 9943.5 | 0 |
| 3506919 | 125505 | None | code60 | 75 cm high octagon | Each | 5603.85 | 5603.85 | 2.0 | False | None | None | False | None | False | 11207.7 | 0 |
| 3506920 | 125505 | None | code61 | LED boards at entrance New metal frame 2”x11.5” rectangular M S ACP (URO decor make) for letter cutting. Milky white acrylic sheet with LED (P 107 adilite make) lighting for glowing with backup metal (tin) sheet poder coated 24G. | Sqm | 10222.0 | 10222.0 | 12.0 | False | None | None | False | None | False | 122664.0 | 0 |