| 1721387162000 | 0 | None | None | Buildings | Construction of Additional 1 Room for Government Lower Primary School in Garudacharpalya Bangalore North Taluk Bangalore Urban District. Under Viveka Yojane/2022-23 | 1388501.94 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3555021 | 128620 | None | Code01 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including etting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated arth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | CUBIC METER | 116.58 | 116.58 | 63.75 | False | None | None | False | None | False | 7431.975 | 0 | | 3555022 | 128620 | None | Code02 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 125.17 | 125.17 | 55.19 | False | None | None | False | None | False | 6908.1323 | 0 | | 3555023 | 128620 | None | Code03 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creatingcontinuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per
specifications ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 139.24 | 139.24 | 136.65 | False | None | None | False | None | False | 19027.146 | 0 | | 3555024 | 128620 | None | Code04 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Ground Floor ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 6950.86 | 6950.86 | 16.1 | False | None | None | False | None | False | 111908.846 | 0 | | 3555025 | 128620 | None | Code05 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers , well compacted using needle vibrators,providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates .Ground Floor Add 8% For Shuttering as per Appendix-1 ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 8588.44 | 8588.44 | 8.03 | False | None | None | False | None | False | 68965.1732 | 0 | | 3555026 | 128620 | None | Code06 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers , well compacted using needle vibrators,providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates .Add 70% For Shuttering as per Appendix-1 ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 13518.84 | 13518.84 | 1.09 | False | None | None | False | None | False | 14735.5356 | 0 | | 3555027 | 128620 | None | Code07 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers , well compacted using needle vibrators,providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates .Add 50% For Shuttering as per Appendix-1 ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 11928.38 | 11928.38 | 2.22 | False | None | None | False | None | False | 26481.0036 | 0 | | 3555028 | 128620 | None | Code08 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)es M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates .Ground Floor Add 70% For Shuttering as per Appendix-1 -with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. COLUMNS | Cum | 14276.14 | 14276.14 | 2.61 | False | None | None | False | None | False | 37260.7254 | 0 | | 3555029 | 128620 | None | Code09 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)es M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates .Add 60% For Shuttering as per Appendix-1 -with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. LINTELS AND ROOF BEAMS | Cum | 13436.37 | 13436.37 | 3.22 | False | None | None | False | None | False | 43265.1114 | 0 | | 3555030 | 128620 | None | Code10 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)es M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Add 50% For Shuttering as per Appendix-1 -with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. ROOF | Cum | 12596.59 | 12596.59 | 8.47 | False | None | None | False | None | False | 106693.1173 | 0 | | 3555031 | 128620 | None | Code11 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)es M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates . Add 45% For Shuttering as per Appendix-1 -with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. CHAJJA | Cum | 12176.71 | 12176.71 | 0.12 | False | None | None | False | None | False | 1461.2052 | 0 | | 3555032 | 128620 | None | Code12 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification) -with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Tonne | 109781.63 | 109781.63 | 2.08 | False | None | None | False | None | False | 228345.7904 | 0 | | 3555033 | 128620 | None | Code13 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 7840.58 | 7840.58 | 22.88 | False | None | None | False | None | False | 179392.4704 | 0 | | 3555034 | 128620 | None | Code14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 326.44 | 326.44 | 37.36 | False | None | None | False | None | False | 12195.7984 | 0 | | 3555035 | 128620 | None | Code15 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications Ground Floor ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 1510.68 | 1510.68 | 73.04 | False | None | None | False | None | False | 110340.0672 | 0 | | 3555036 | 128620 | None | Code16 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. . ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 312.94 | 312.94 | 7.02 | False | None | None | False | None | False | 2196.8388 | 0 | | 3555037 | 128620 | None | Code17 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. . Ground floor ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 312.94 | 312.94 | 49.96 | False | None | None | False | None | False | 15634.4824 | 0 | | 3555038 | 128620 | None | Code18 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off
corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per
specifications and as per directions of Engineer-in-charge. m2 234.00 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand . Ground Floor ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 342.39 | 342.39 | 83.45 | False | None | None | False | None | False | 28572.4455 | 0 | | 3555039 | 128620 | None | Code19 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand)
finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (1 cement: 4 fine sand . ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 455.29 | 455.29 | 110.06 | False | None | None | False | None | False | 50109.2174 | 0 | | 3555040 | 128620 | None | Code20 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including
applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Ground Floor ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 5495.4 | 5495.4 | 2.52 | False | None | None | False | None | False | 13848.408 | 0 | | 3555041 | 128620 | None | Code21 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment)..Ground Floor ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 181.63 | 181.63 | 108.0 | False | None | None | False | None | False | 19616.04 | 0 | | 3555042 | 128620 | None | Code22 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.. Ground Floor ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Kg | 224.58 | 224.58 | 120.96 | False | None | None | False | None | False | 27165.1968 | 0 | | 3555043 | 128620 | None | Code23 | Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Ground Floor ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 2558.71 | 2558.71 | 51.52 | False | None | None | False | None | False | 131824.7392 | 0 | | 3555044 | 128620 | None | Code24 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 122.72 | 122.72 | 125.08 | False | None | None | False | None | False | 15349.8176 | 0 | | 3555045 | 128620 | None | Code25 | Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 132.54 | 132.54 | 125.08 | False | None | None | False | None | False | 16578.1032 | 0 | | 3555046 | 128620 | None | Code26 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Ground Floor ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 65.04 | 65.04 | 150.16 | False | None | None | False | None | False | 9766.4064 | 0 | | 3555047 | 128620 | None | Code27 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 109.22 | 109.22 | 150.16 | False | None | None | False | None | False | 16400.4752 | 0 | | 3555048 | 128620 | None | Code28 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paintof approv ed brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions
of Engineer-in-charge. ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 204.94 | 204.94 | 6.84 | False | None | None | False | None | False | 1401.7896 | 0 | | 3555049 | 128620 | None | Code29 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub
ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc.HDPE Grade PE80-PN6.0,110mm dia .---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | m | 575.56 | 575.56 | 7.0 | False | None | None | False | None | False | 4028.92 | 0 | | 3555050 | 128620 | None | Code30 | Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using2x1.5Sqmm (Phase& Neut ral) & 1x1.0 sqmm (Earth wire) FRLS multistrand PVC insulat ed copper wire(confirming toIS-694:and latest amendments) with a 6Amps flush type SP control switch sClass Room be fixed on the existing plastic sheet/ gang box, the other end of the wires sClass Room be termi nated with sufficient loose length in a wood/PVC round block.complete for each outlet. a) Short point-up to 3 Mtrs from tapping point to out let via switch.---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Point | 317.42 | 317.42 | 4.0 | False | None | None | False | None | False | 1269.68 | 0 | | 3555051 | 128620 | None | Code31 | b) Medium point above 3 Mtrs up to 6 Mtrs from tapping point to out let via switch | Point | 329.22 | 329.22 | 4.0 | False | None | None | False | None | False | 1316.88 | 0 | | 3555052 | 128620 | None | Code32 | c) Long point above 6 Mtrs up to 10 Mtrs from tapping point to out let via switch | Point | 654.9 | 654.9 | 4.0 | False | None | None | False | None | False | 2619.6 | 0 | | 3555053 | 128620 | None | Code33 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary support ing back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal /PVC box. 1 to 3 Module ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 161.66 | 161.66 | 1.0 | False | None | None | False | None | False | 161.66 | 0 | | 3555054 | 128620 | None | Code34 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. A)12" x 9" x 3" (300 x 228 x 76 mm) ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 135.7 | 135.7 | 16.0 | False | None | None | False | None | False | 2171.2 | 0 | | 3555055 | 128620 | None | Code35 | b)12x 12" x 3" (300 x 300 x 76 mm) | Each | 141.6 | 141.6 | 10.0 | False | None | None | False | None | False | 1416.0 | 0 | | 3555056 | 128620 | None | Code36 | c) 10 x 7" x 3" (254 x 178 x 76 mm) | Each | 132.16 | 132.16 | 6.0 | False | None | None | False | None | False | 792.96 | 0 | | 3555057 | 128620 | None | Code37 | Supplying 6A flush/projected type socket and 6 amps flush/projected type SP switch either surface/flush moun ting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessarycapacity wires as required.6 Amps 2 Way ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 151.04 | 151.04 | 4.0 | False | None | None | False | None | False | 604.16 | 0 | | 3555058 | 128620 | None | Code38 | Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/ Stone/C.C wall 16 - 18 Way ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 417.72 | 417.72 | 1.0 | False | None | None | False | None | False | 417.72 | 0 | | 3555059 | 128620 | None | Code39 | Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws. ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sq CM | 0.48 | 0.48 | 1000.0 | False | None | None | False | None | False | 480.0 | 0 | | 3555060 | 128620 | None | Code40 | Supplying heavy gauge PVC conduit pipe 20mm dia con firming to IS 2509 with suitable size bends,junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone struct ure or rawl plugs in case of brick walls and cement plastering damage d portion using heavy gauge saddles at an interval of 700 mm using NF screws. ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Mtr | 81.42 | 81.42 | 100.0 | False | None | None | False | None | False | 8142.0 | 0 | | 3555061 | 128620 | None | Code41 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve,indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiringas required. 6-32 Amps ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 489.7 | 489.7 | 1.0 | False | None | None | False | None | False | 489.7 | 0 | | 3555062 | 128620 | None | Code42 | Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz ACsupply & completely wired on existing box. ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 762.28 | 762.28 | 1.0 | False | None | None | False | None | False | 762.28 | 0 | | 3555063 | 128620 | None | Code43 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 94:confirming to latest amendments..---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Mtr | 49.56 | 49.56 | 450.0 | False | None | None | False | None | False | 22302.0 | 0 | | 3555064 | 128620 | None | Code44 | Supplying and fixing PVC/metal conduit Deepjunction box. 32mm deep junction box ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 81.42 | 81.42 | 5.0 | False | None | None | False | None | False | 407.1 | 0 | | 3555065 | 128620 | None | Code45 | Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED light fitting 1 x 4' - 36/40 W . LED light fitting 1 x 4' - 36/40 W ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 1497.42 | 1497.42 | 3.0 | False | None | None | False | None | False | 4492.26 | 0 | | 3555066 | 128620 | None | Code46 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps On wall / ceiling / Rafter / Girders ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 143.96 | 143.96 | 3.0 | False | None | None | False | None | False | 431.88 | 0 | | 3555067 | 128620 | None | Code47 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty. Regular Model ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 4429.72 | 4429.72 | 2.0 | False | None | None | False | None | False | 8859.44 | 0 | | 3555068 | 128620 | None | Code48 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers ---with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 1486.8 | 1486.8 | 3.0 | False | None | None | False | None | False | 4460.4 | 0 |
|