| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1721382486000 | 0 | None | None | Buildings | Construction of Health and Wellness Centre at Mallenahalli in Tarikere Taluk, Chikkamagaluru District. (Water Supply & Sanitary Works) | 315678.32 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3552848 | 128516 | None | P.No.122 I.No.13.32.3 V-2 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per directions of Engineer in charge.Concealed work,including cutting chases and making good the walls etc 25 mm Dia | m | 562.86 | 562.86 | 40.0 | False | None | None | False | None | False | 22514.4 | 0 | | 3552849 | 128516 | None | P.No.122 I.No.13.32.4 V-2 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per directions of Engineer in charge.Concealed work,including cutting chases and making good the walls etc 32 mm Dia | m | 657.26 | 657.26 | 40.0 | False | None | None | False | None | False | 26290.4 | 0 | | 3552850 | 128516 | None | P.No.117 I.No.13.2.2 of Vol.2 | Providing and fixing brass bib cock of approved quality :20 mm nominal bore | Nos | 359.9 | 359.9 | 8.0 | False | None | None | False | None | False | 2879.2 | 0 | | 3552851 | 128516 | None | P.No.117 I.No.13.4.1 V-2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore | Nos | 647.82 | 647.82 | 4.0 | False | None | None | False | None | False | 2591.28 | 0 | | 3552852 | 128516 | None | P.No.117 I.No.13.4.2 V-2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore | Nos | 705.64 | 705.64 | 4.0 | False | None | None | False | None | False | 2822.56 | 0 | | 3552853 | 128516 | None | P.No.132 I.No.14.7.2 V-2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever eequire:White Vitreous China Wash basin size 630x450 mm with a single 15
mm C.P. brass pillar tap | Each | 3021.98 | 3021.98 | 8.0 | False | None | None | False | None | False | 24175.84 | 0 | | 3552854 | 128516 | None | P.No.132 I.No.14.5.1 V-2 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Each | 10197.56 | 10197.56 | 1.0 | False | None | None | False | None | False | 10197.56 | 0 | | 3552855 | 128516 | None | P.No.132 I.No.14.7.3 V-2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | Each | 3381.88 | 3381.88 | 5.0 | False | None | None | False | None | False | 16909.4 | 0 | | 3552856 | 128516 | None | P.No.134 I.No.14.10.2.2 V-2 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x460 mm bowl depth 200 mm | Each | 3351.2 | 3351.2 | 1.0 | False | None | None | False | None | False | 3351.2 | 0 | | 3552857 | 128516 | None | P.No.136 I.No.14.27.2 V-2 | Providing and fixing white vitreous china laboratory sink including making all connections including cost of fittings Size 600x450x200 mm | Each | 3921.14 | 3921.14 | 1.0 | False | None | None | False | None | False | 3921.14 | 0 | | 3552858 | 128516 | None | P.No.136 I.No.14.28.1.2 V-2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:Semi rigid pipe:40mm dia | Each | 103.84 | 103.84 | 5.0 | False | None | None | False | None | False | 519.2 | 0 | | 3552859 | 128516 | None | P.No.137 I.No.14.40.2 V-1 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g | Each | 585.28 | 585.28 | 5.0 | False | None | None | False | None | False | 2926.4 | 0 | | 3552860 | 128516 | None | P.No.136 I.No.14.32.2 V-2 | Providing and fixing 453x357mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing . | Each | 1201.24 | 1201.24 | 5.0 | False | None | None | False | None | False | 6006.2 | 0 | | 3552861 | 128516 | None | P.No.131 I.No.14.1.1 V-2 | Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 5763.12 | 5763.12 | 4.0 | False | None | None | False | None | False | 23052.48 | 0 | | 3552862 | 128516 | None | P.No.131 I.No.14.3.1 V-2 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid | Each | 7052.86 | 7052.86 | 1.0 | False | None | None | False | None | False | 7052.86 | 0 | | 3552863 | 128516 | None | P.No.124 I.No.13.43 V-2 | Providing and fixing trap of self ceansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors:*100mm inlet and 100mm outlet.* Sand cast iron S&S as per IS:1729. | Each | 787.06 | 787.06 | 2.0 | False | None | None | False | None | False | 1574.12 | 0 | | 3552864 | 128516 | None | P.No.125 I.No.13.48 V-2 | Providing and fixingon wall face unplasticised Rigid PVC rain water pipes confirming to IS:13592 Type A,including jointing with seal ring confirming to IS:5382,leaving 10mm gap for the thermal expansion,(i) Single socketed pipes 100mm diameter | Rmtr | 343.38 | 343.38 | 100.0 | False | None | None | False | None | False | 34338.0 | 0 | | 3552865 | 128516 | None | P.No.6 I.No.1.6.1 V-1 | Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m | Cum | 571.12 | 571.12 | 15.0 | False | None | None | False | None | False | 8566.8 | 0 | | 3552866 | 128516 | None | P.No.191 I.No.16.9 V-5 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. | Each | 6435.72 | 6435.72 | 3.0 | False | None | None | False | None | False | 19307.16 | 0 | | 3552867 | 128516 | None | P-7 I-1.10 V-1 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications | Cum | 188.8 | 188.8 | 8.0 | False | None | None | False | None | False | 1510.4 | 0 | | 3552868 | 128516 | None | P-120 I-13.22.2 V-2 | Providing and fixing PTMT grating of approved quality and colour, Rectangular type with openable circular lid | Each | 238.36 | 238.36 | 5.0 | False | None | None | False | None | False | 1191.8 | 0 | | 3552869 | 128516 | None | P-120 I-13.23.1 V-2 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball 15 mm nominal bore, 105 mm long, weighing not less than 138 g | Nos | 241.9 | 241.9 | 1.0 | False | None | None | False | None | False | 241.9 | 0 | | 3552870 | 128516 | None | P-119 I-13.15 V-2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 | Nos | 855.5 | 855.5 | 1.0 | False | None | None | False | None | False | 855.5 | 0 | | 3552871 | 128516 | None | P-119 I-13.16 V-2 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 | Nos | 731.6 | 731.6 | 4.0 | False | None | None | False | None | False | 2926.4 | 0 | | 3552872 | 128516 | None | P-123 I-13.34 V-2 | Providing and placing on terrace(at all floor levels), polyethylene water storage tank,IS:120701 marked,with cover and suitable locking arrangements, and making necessary holes for inlet, outlet and over flow pipes, but without fittings and the base support for tank | l | 10.62 | 10.62 | 4000.0 | False | None | None | False | None | False | 42480.0 | 0 | | 3552873 | 128516 | None | P-247 I-21.1.1 V-5 | Water purification plants: Providing, Installation and Commissioning of
automatic Water purification plant (RO+UF) with all accessories piping,
product water tank on single phase power supply as per the enclosed
detailed Technical Specifications including cost of material, loading
and unloading and as directed by the Engineer in charge. (Ref- detailed
specification enclosed seperatly). Note:- 1.The above rates mentioned
are only for the preparation of estimate purpose. 2. All items are to be of
BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for
procurement. 4. No direct payment should be made under any situation
or condition or on any account. 5. After commissioning of plant necessary
testing to be done for the satisfactory of Engineer Incharge. Note : Refer
the ANNEXURE : F for Detailed Specification of Each components | Each | 29500.0 | 29500.0 | 1.0 | False | None | None | False | None | False | 29500.0 | 0 | | 3552874 | 128516 | None | P-149 I-13.4.1 V-5 | Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amndments etc., complete. 0.50 HP/0.37 kw - 5 STG (Stage) | Each | 12000.6 | 12000.6 | 1.0 | False | None | None | False | None | False | 12000.6 | 0 | | 3552875 | 128516 | None | P-123 I-13.38 V-2 | Providing and fixing square mouth S.W.gully trap class SP-1 complete with C.I.grating,brick masonry camber 150X 100 mm size P type with non modular bcommon burnt clay bricks of designation 3.5 & with water tight.C.I cover with frame of 300X300 mm size (inside)the weight of the cover to be not less than 4.50kg and frame to be not less than 2.70kg as per standard design | Each | 2987.76 | 2987.76 | 2.0 | False | None | None | False | None | False | 5975.52 | 0 |
| | 1721382486000 | 0 | None | None | Buildings | Construction of Health and Wellness Centre at Mallenahalli in Tarikere Taluk, Chikkamagaluru District. (Civil Works) | 5649957.36 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3552876 | 128517 | None | V-1 P-8 I-1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth | Cum | 112.1 | 112.1 | 125.0 | False | None | None | False | None | False | 14012.5 | 0 | | 3552877 | 128517 | None | V-1 P-8 I-1.14 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 120.36 | 120.36 | 146.1 | False | None | None | False | None | False | 17584.596 | 0 | | 3552878 | 128517 | None | V-1 P-7 I-1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceed ing 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 313.88 | 313.88 | 95.16 | False | None | None | False | None | False | 29868.8208 | 0 | | 3552879 | 128517 | None | V-2 P-5 I-4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 ltr/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications | Sqm | 139.24 | 139.24 | 108.93 | False | None | None | False | None | False | 15167.4132 | 0 | | 3552880 | 128517 | None | V-1 P-15 I-2.1.3 | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in
layers not exceeding 150 mm thickness, well compacted using plate vibrators,
including all lead & lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) | Cum | 7067.02 | 7067.02 | 26.97 | False | None | None | False | None | False | 190597.5294 | 0 | | 3552881 | 128517 | None | V-1 P-15 I-2.2.1 | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Centering & formwork are included) Foundation upto Plinth | Cum | 8012.15 | 8012.15 | 32.77 | False | None | None | False | None | False | 262558.1555 | 0 | | 3552882 | 128517 | None | V-1 P-16 I-2.3.1 | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in
layers not exceeding 150 mm thickness, well compacted using plate vibrators,
including all lead & lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Plinth beam | Cum | 12305.98 | 12305.98 | 8.3 | False | None | None | False | None | False | 102139.634 | 0 | | 3552883 | 128517 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Columns above Plinth GF | Cum | 13727.06 | 13727.06 | 4.13 | False | None | None | False | None | False | 56692.7578 | 0 | | 3552884 | 128517 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Columns FF | Cum | 13864.33 | 13864.33 | 3.24 | False | None | None | False | None | False | 44920.4292 | 0 | | 3552885 | 128517 | None | V-1 P-184 I-2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. GF | Tonne | 105559.26 | 105559.26 | 6.85 | False | None | None | False | None | False | 723080.931 | 0 | | 3552886 | 128517 | None | V-1 P-184 I-2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. FF | Tonne | 106614.85 | 106614.85 | 3.23 | False | None | None | False | None | False | 344365.9655 | 0 | | 3552887 | 128517 | None | V-1 P-2.2.1 I-15 | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Columns upto Plinth | Cum | 13070.98 | 13070.98 | 1.45 | False | None | None | False | None | False | 18952.921 | 0 | | 3552888 | 128517 | None | V-1 P-16 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Chajja & Cill FF | Cum | 11825.46 | 11825.46 | 0.63 | False | None | None | False | None | False | 7450.0398 | 0 | | 3552889 | 128517 | None | V-1 P-2.2.1 P-15 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Chajja GF | Cum | 11708.37 | 11708.37 | 0.79 | False | None | None | False | None | False | 9249.6123 | 0 | | 3552890 | 128517 | None | V-1 P-16 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Roof Beam FF | Cum | 13048.78 | 13048.78 | 7.73 | False | None | None | False | None | False | 100867.0694 | 0 | | 3552891 | 128517 | None | V-1 P-2.2.1 P-15 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Roof Beam and Lintels GF | Cum | 12919.58 | 12919.58 | 9.31 | False | None | None | False | None | False | 120281.2898 | 0 | | 3552892 | 128517 | None | V-1 P-16 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) RCC Slab FF | Cum | 12233.23 | 12233.23 | 14.21 | False | None | None | False | None | False | 173834.1983 | 0 | | 3552893 | 128517 | None | V-2 P-17 I-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF | Sqm | 1545.8 | 1545.8 | 176.5 | False | None | None | False | None | False | 272833.7 | 0 | | 3552894 | 128517 | None | V-2 P-17 I-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF | Sqm | 1561.26 | 1561.26 | 207.6 | False | None | None | False | None | False | 324117.576 | 0 | | 3552895 | 128517 | None | V-2 P-13 I-6.34 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF | Sqm | 1302.72 | 1302.72 | 39.9 | False | None | None | False | None | False | 51978.528 | 0 | | 3552896 | 128517 | None | V-2 P-13 I-6.34 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF | Sqm | 1315.75 | 1315.75 | 36.8 | False | None | None | False | None | False | 48419.6 | 0 | | 3552897 | 128517 | None | V-2 P-63 I-9.25 | Providing and laying 60mm thick factory made cement concrete paver
block of approved shape and colour of M -30 grade made of C&D waste
by block making machine with vibratory compaction laid in required
pattern and including over 50mm thick compacted bed of coarse sand,
filling the joints with fine sand etc. all complete as per the direction of
Engineer-in-charge GF | Sqm | 944.0 | 944.0 | 400.0 | False | None | None | False | None | False | 377600.0 | 0 | | 3552898 | 128517 | None | V-2 P-108 I-12.83.2 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos.stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge.42x50 mm PVC Extruded section GF | m | 282.02 | 282.02 | 12.0 | False | None | None | False | None | False | 3384.24 | 0 | | 3552899 | 128517 | None | V-2 P-111 I-12.92 | Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) GF | Sqm | 7369.1 | 7369.1 | 5.0 | False | None | None | False | None | False | 36845.5 | 0 | | 3552900 | 128517 | None | V-2 P-111 I-12.86 | Providing & fixing of 2 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) GF | Sqm | 6360.2 | 6360.2 | 15.39 | False | None | None | False | None | False | 97883.478 | 0 | | 3552901 | 128517 | None | V-2 P-111 I-12.86 | Providing & fixing of 2 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FF | Sqm | 6423.8 | 6423.8 | 11.21 | False | None | None | False | None | False | 72010.798 | 0 | | 3552902 | 128517 | None | V-2 P-110 I-12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) GF | Sqm | 6748.42 | 6748.42 | 0.81 | False | None | None | False | None | False | 5466.2202 | 0 | | 3552903 | 128517 | None | V-2 P-110 I-12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FF | Sqm | 6815.9 | 6815.9 | 0.81 | False | None | None | False | None | False | 5520.879 | 0 | | 3552904 | 128517 | None | V-2 P-86 I-11.34B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc GF | Kgs | 215.94 | 215.94 | 340.2 | False | None | None | False | None | False | 73462.788 | 0 | | 3552905 | 128517 | None | V-2 P-86 I-11.34B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc FF | Kgs | 218.1 | 218.1 | 252.32 | False | None | None | False | None | False | 55030.992 | 0 | | 3552906 | 128517 | None | V-2 P-84 I-11.26.3 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes in cluding cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge GF | Kgs | 215.94 | 215.94 | 279.3 | False | None | None | False | None | False | 60312.042 | 0 | | 3552907 | 128517 | None | V-2 P100 I-12.13.1 | Providing sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as specifications. GF | Cum | 116601.7 | 116601.7 | 0.25 | False | None | None | False | None | False | 29150.425 | 0 | | 3552908 | 128517 | None | V-2 P100 I-12.13.1 | Providing sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as specifications. FF | Cum | 117767.72 | 117767.72 | 0.17 | False | None | None | False | None | False | 20020.5124 | 0 | | 3552909 | 128517 | None | V-2 P-105 I-12.57.6 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick Both side commercial. GF | Sqm | 3919.96 | 3919.96 | 11.9 | False | None | None | False | None | False | 46647.524 | 0 | | 3552910 | 128517 | None | V-2 P-105 I-12.57.6 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick Both side commercial. GF | Sqm | 3959.16 | 3959.16 | 7.8 | False | None | None | False | None | False | 30881.448 | 0 | | 3552911 | 128517 | None | V-2 P-111 I-12.93.2 | Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Clerestory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension
Grade), calcium carbonate and natural fibres (wood powder/rice husk/
wheat husk) and non toxic additives (maximum toxicity index of 12 for
100 g) fabricated with miter joints after applying PVC solvent cement and
screwed with full body threaded star headed SS screws having minimum
frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) &
1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of
elasticity 900 N/mm2 and resistance to spread of flame of Class A category
with property of being termite/borer proof, water/moisture proof and fire
retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners
of required dia and length complete as per direction of Engineer-InCharge.
(Fixtures shall be paid for separately) Size 62 x 125mm GF | m | 901.52 | 901.52 | 22.8 | False | None | None | False | None | False | 20554.656 | 0 | | 3552912 | 128517 | None | V-2 P-111 I-12.93.2 | Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Clerestory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension
Grade), calcium carbonate and natural fibres (wood powder/rice husk/
wheat husk) and non toxic additives (maximum toxicity index of 12 for
100 g) fabricated with miter joints after applying PVC solvent cement and
screwed with full body threaded star headed SS screws having minimum
frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) &
1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of
elasticity 900 N/mm2 and resistance to spread of flame of Class A category
with property of being termite/borer proof, water/moisture proof and fire
retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners
of required dia and length complete as per direction of Engineer-InCharge.
(Fixtures shall be paid for separately) Size 62 x 125mm FF | m | 910.54 | 910.54 | 10.2 | False | None | None | False | None | False | 9287.508 | 0 | | 3552913 | 128517 | None | V-2 P-112 I-12.94.1 | Providing and fixing factory made Green certified, Anti Termite, UV resistant,
high water absorbant single extruded WPC (Wood PolymerComposite) solid
plain flush door shutter of required size comprising of virgin polymer of
K value 58-60 (Suspension Grade), calcium carbonate and natural fibers
(wood powder/rice husk/wheat husk) and non toxic additives (maximum
toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and
screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum
compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and
resistance to spread of flame of Class A category with property of being
termite/borer proof, water/moisture proof and fire retardant and fixing
with stainless steel butt hinges of required size with necessary full body
threaded star headed counter sunk S.S screws The cost includes cost of
materials, transportation, labour and fixing charges.(Cost of Fixtures to be
paid separately) 30 mm thickness GF | Sqm | 4112.3 | 4112.3 | 7.56 | False | None | None | False | None | False | 31088.988 | 0 | | 3552914 | 128517 | None | V-2 P-112 I-12.94.1 | Providing and fixing factory made Green certified, Anti Termite, UV resistant,
high water absorbant single extruded WPC (Wood PolymerComposite) solid
plain flush door shutter of required size comprising of virgin polymer of
K value 58-60 (Suspension Grade), calcium carbonate and natural fibers
(wood powder/rice husk/wheat husk) and non toxic additives (maximum
toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and
screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum
compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and
resistance to spread of flame of Class A category with property of being
termite/borer proof, water/moisture proof and fire retardant and fixing
with stainless steel butt hinges of required size with necessary full body
threaded star headed counter sunk S.S screws The cost includes cost of
materials, transportation, labour and fixing charges.(Cost of Fixtures to be
paid separately) 30 mm thickness FF | Sqm | 4153.42 | 4153.42 | 3.78 | False | None | None | False | None | False | 15699.9276 | 0 | | 3552915 | 128517 | None | V-2 P-104 I-12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m.including cost of materials, labour charges, complete as per specifications. GF | Nos | 1198.88 | 1198.88 | 4.0 | False | None | None | False | None | False | 4795.52 | 0 | | 3552916 | 128517 | None | V-2 P-104 I-12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m.including cost of materials, labour charges, complete as per specifications. FF | Nos | 1210.87 | 1210.87 | 4.0 | False | None | None | False | None | False | 4843.48 | 0 | | 3552917 | 128517 | None | V-2 P-69 I-10.6.3 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm GF | Each | 70.8 | 70.8 | 30.0 | False | None | None | False | None | False | 2124.0 | 0 | | 3552918 | 128517 | None | V-2 P-69 I-10.6.3 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm FF | Each | 71.51 | 71.51 | 4.0 | False | None | None | False | None | False | 286.04 | 0 | | 3552919 | 128517 | None | V-2 P-105 I-12.59 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. GF | Nos | 1314.52 | 1314.52 | 5.0 | False | None | None | False | None | False | 6572.6 | 0 | | 3552920 | 128517 | None | V-2 P-105 I-12.59 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. FF | Nos | 1327.67 | 1327.67 | 4.0 | False | None | None | False | None | False | 5310.68 | 0 | | 3552921 | 128517 | None | V-2 P-105 I-12.60 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. GF | Nos | 1241.36 | 1241.36 | 5.0 | False | None | None | False | None | False | 6206.8 | 0 | | 3552922 | 128517 | None | V-2 P-105 I-12.60 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. FF | Nos | 1253.77 | 1253.77 | 4.0 | False | None | None | False | None | False | 5015.08 | 0 | | 3552923 | 128517 | None | V-2 P-105 I-12.61 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. Complete GF | Nos | 1168.2 | 1168.2 | 5.0 | False | None | None | False | None | False | 5841.0 | 0 | | 3552924 | 128517 | None | V-2 P-105 I-12.61 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. Complete FF | Nos | 1179.88 | 1179.88 | 4.0 | False | None | None | False | None | False | 4719.52 | 0 | | 3552925 | 128517 | None | V-2 P-105 I-12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete GF | Nos | 279.66 | 279.66 | 10.0 | False | None | None | False | None | False | 2796.6 | 0 | | 3552926 | 128517 | None | V-2 P-105 I-12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete FF | Nos | 282.46 | 282.46 | 8.0 | False | None | None | False | None | False | 2259.68 | 0 | | 3552927 | 128517 | None | V-2 P-105 I-12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete GF | Nos | 153.4 | 153.4 | 10.0 | False | None | None | False | None | False | 1534.0 | 0 | | 3552928 | 128517 | None | V-2 P-105 I-12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete FF | Nos | 154.93 | 154.93 | 8.0 | False | None | None | False | None | False | 1239.44 | 0 | | 3552929 | 128517 | None | V-2 P-105 I-12.64 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms GF | Nos | 64.9 | 64.9 | 5.0 | False | None | None | False | None | False | 324.5 | 0 | | 3552930 | 128517 | None | V-2 P-105 I-12.64 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms FF | Nos | 65.55 | 65.55 | 4.0 | False | None | None | False | None | False | 262.2 | 0 | | 3552931 | 128517 | None | V-2 P-107 I-12.75 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) GF | Nos | 324.5 | 324.5 | 15.0 | False | None | None | False | None | False | 4867.5 | 0 | | 3552932 | 128517 | None | V-2 P-107 I-12.75 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) FF | Nos | 327.75 | 327.75 | 12.0 | False | None | None | False | None | False | 3933.0 | 0 | | 3552933 | 128517 | None | V-2 P-XI I-309 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications. GF | Rmtr | 15.0 | 15.0 | 29.7 | False | None | None | False | None | False | 445.5 | 0 | | 3552934 | 128517 | None | V-2 P-XI I-309 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications. FF | Rmtr | 15.15 | 15.15 | 20.55 | False | None | None | False | None | False | 311.3325 | 0 | | 3552935 | 128517 | None | V-2 P-60 I-9.12.2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm GF | Sqm | 1351.1 | 1351.1 | 174.9 | False | None | None | False | None | False | 236307.39 | 0 | | 3552936 | 128517 | None | V-2 P-60 I-9.12.2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm FF | Sqm | 1364.61 | 1364.61 | 47.9 | False | None | None | False | None | False | 65364.819 | 0 | | 3552937 | 128517 | None | V-2 P-60 I-9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete GF | Sqm | 1049.02 | 1049.02 | 5.9 | False | None | None | False | None | False | 6189.218 | 0 | | 3552938 | 128517 | None | V-2 P-60 I-9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete FF | Sqm | 1059.51 | 1059.51 | 5.9 | False | None | None | False | None | False | 6251.109 | 0 | | 3552939 | 128517 | None | V-2 P-71 I-10.14 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete GF | Sqm | 1305.08 | 1305.08 | 42.8 | False | None | None | False | None | False | 55857.424 | 0 | | 3552940 | 128517 | None | V-2 P-71 I-10.14 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete FF | Sqm | 1318.13 | 1318.13 | 36.3 | False | None | None | False | None | False | 47848.119 | 0 | | 3552941 | 128517 | None | V-2 P-63 I-9.28 | Providing and laying flooring and steps machine cut granite slabs 40mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications GF | Sqm | 5049.22 | 5049.22 | 7.0 | False | None | None | False | None | False | 35344.54 | 0 | | 3552942 | 128517 | None | V-2 P-63 I-9.28 | Providing and laying flooring and steps machine cut granite slabs 40mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications FF | Sqm | 5099.71 | 5099.71 | 2.5 | False | None | None | False | None | False | 12749.275 | 0 | | 3552943 | 128517 | None | V-2 P-43 I-8.10 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-chargeGF | Sqm | 248.98 | 248.98 | 89.7 | False | None | None | False | None | False | 22333.506 | 0 | | 3552944 | 128517 | None | V-2 P-43 I-8.10 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge FF | Sqm | 251.47 | 251.47 | 53.8 | False | None | None | False | None | False | 13529.086 | 0 | | 3552945 | 128517 | None | V-2 P-41 I-8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.) GF | Sqm | 329.22 | 329.22 | 357.2 | False | None | None | False | None | False | 117597.384 | 0 | | 3552946 | 128517 | None | V-2 P-41 I-8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.) FF | Sqm | 332.51 | 332.51 | 240.9 | False | None | None | False | None | False | 80101.659 | 0 | | 3552947 | 128517 | None | V-2 P-42 I-8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) finished rough to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( outside) GF | Sqm | 454.3 | 454.3 | 198.0 | False | None | None | False | None | False | 89951.4 | 0 | | 3552948 | 128517 | None | V-2 P-42 I-8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) finished rough to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( outside) FF | Sqm | 458.84 | 458.84 | 212.8 | False | None | None | False | None | False | 97641.152 | 0 | | 3552949 | 128517 | None | V-2 P-43 I-8.16.3 | KSRB 15.8.2 Providing and fixing plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ) GF | Rmtr | 51.92 | 51.92 | 340.78 | False | None | None | False | None | False | 17693.2976 | 0 | | 3552950 | 128517 | None | V-2 P-43 I-8.16.3 | KSRB 15.8.2 Providing and fixing plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ) FF | Rmtr | 52.44 | 52.44 | 266.16 | False | None | None | False | None | False | 13957.4304 | 0 | | 3552951 | 128517 | None | V-2 P-44 I-8.16a | Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specifications GF | Sqm | 1460.84 | 1460.84 | 5.2 | False | None | None | False | None | False | 7596.368 | 0 | | 3552952 | 128517 | None | V-2 P-45 I-8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge GF | Sqm | 62.54 | 62.54 | 28.5 | False | None | None | False | None | False | 1782.39 | 0 | | 3552953 | 128517 | None | V-2 P-45 I-8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge FF | Sqm | 63.17 | 63.17 | 12.8 | False | None | None | False | None | False | 808.576 | 0 | | 3552954 | 128517 | None | V-2 P-46 I-8.40 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge GF | Sqm | 135.7 | 135.7 | 28.5 | False | None | None | False | None | False | 3867.45 | 0 | | 3552955 | 128517 | None | V-2 P-46 I-8.40 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge FF | Sqm | 137.06 | 137.06 | 12.8 | False | None | None | False | None | False | 1754.368 | 0 | | 3552956 | 128517 | None | V-2 P-48 I-8.51 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. GF | Sqm | 118.0 | 118.0 | 446.9 | False | None | None | False | None | False | 52734.2 | 0 | | 3552957 | 128517 | None | V-2 P-48 I-8.51 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. FF | Sqm | 119.18 | 119.18 | 294.7 | False | None | None | False | None | False | 35122.346 | 0 | | 3552958 | 128517 | None | V-2 P-48 I-8.39 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF | Sqm | 149.86 | 149.86 | 446.9 | False | None | None | False | None | False | 66972.434 | 0 | | 3552959 | 128517 | None | V-2 P-48 I-8.39 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 151.36 | 151.36 | 294.7 | False | None | None | False | None | False | 44605.792 | 0 | | 3552960 | 128517 | None | V-2 P-46 I-8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF | Sqm | 205.32 | 205.32 | 198.0 | False | None | None | False | None | False | 40653.36 | 0 | | 3552961 | 128517 | None | V-2 P-46 I-8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 207.37 | 207.37 | 212.8 | False | None | None | False | None | False | 44128.336 | 0 | | 3552962 | 128517 | None | V-2 P-47 I-8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF | Sqm | 59.0 | 59.0 | 28.6 | False | None | None | False | None | False | 1687.4 | 0 | | 3552963 | 128517 | None | V-2 P-47 I-8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 59.59 | 59.59 | 11.2 | False | None | None | False | None | False | 667.408 | 0 | | 3552964 | 128517 | None | V-2 P-48 I-8.40 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF | Sqm | 135.7 | 135.7 | 28.6 | False | None | None | False | None | False | 3881.02 | 0 | | 3552965 | 128517 | None | V-2 P-48 I-8.40 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 137.06 | 137.06 | 11.2 | False | None | None | False | None | False | 1535.072 | 0 | | 3552966 | 128517 | None | A.R | Providing & Fixing Board for Disply of project details using MS angles & MS sheet as per detailed drawing GF | Nos | 10000.0 | 10000.0 | 1.0 | False | None | None | False | None | False | 10000.0 | 0 | | 3552967 | 128517 | None | V-2 P-149 I-15.1 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. | Sqm | 973.7 | 973.7 | 94.75 | False | None | None | False | None | False | 92258.075 | 0 | | 3552968 | 128517 | None | V-2 P-150 I-15.7 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel reinforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) | Sqm | 732.96 | 732.96 | 5.98 | False | None | None | False | None | False | 4383.1008 | 0 | | 3552969 | 128517 | None | V-2 P-9 I-5.4 | Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 7539.02 | 7539.02 | 1.8 | False | None | None | False | None | False | 13570.236 | 0 | | 3552970 | 128517 | None | V-2 P-13 I-6.5 | Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 12952.86 | 12952.86 | 4.6 | False | None | None | False | None | False | 59583.156 | 0 | | 3552971 | 128517 | None | V-1 P-16 I-2.3.2 | Providing and laying in Cement Concrete for all Basement & surface level
works, return walls, retaining walls, sunken floors etc. The granite/trap/
basalt crushed graded coarse aggregates and fine aggregates as per relevant
IS Codes machine mixed with super plasticisers, laid in layers, well compacted
using needle vibrators, providing weep holes wherever necessary, including all
lead & lifts, cost of all materials of quality, labour, Usage charges of machinery,
curing and all other appurtenances required to complete the work as per
technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.(The cost of steel reinforcement to be paid separately | Cum | 7646.4 | 7646.4 | 2.0 | False | None | None | False | None | False | 15292.8 | 0 | | 3552972 | 128517 | None | V-2 P-42 I-8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Inside) | Sqm | 454.3 | 454.3 | 30.72 | False | None | None | False | None | False | 13956.096 | 0 | | 3552973 | 128517 | None | A.R | Man hole cover and pipiline bore | LS | 5000.0 | 5000.0 | 1.0 | False | None | None | False | None | False | 5000.0 | 0 | | 3552974 | 128517 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Roof (Straight & Arched) GF | Cum | 12112.11 | 12112.11 | 18.65 | False | None | None | False | None | False | 225890.8515 | 0 |
| | 1721382486000 | 0 | None | None | Buildings | Construction of Health and Wellness Centre at Mallenahalli in Tarikere Taluk, Chikkamagaluru District. (Electrical Works) | 392355.32 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3552975 | 128518 | None | 2.2.1 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch | Point | 317.42 | 317.42 | 25.0 | False | None | None | False | None | False | 7935.5 | 0 | | 3552976 | 128518 | None | 2.2.2 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch | Point | 447.22 | 447.22 | 22.0 | False | None | None | False | None | False | 9838.84 | 0 | | 3552977 | 128518 | None | 2.2.3 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch | Point | 654.9 | 654.9 | 16.0 | False | None | None | False | None | False | 10478.4 | 0 | | 3552978 | 128518 | None | 3.4.1 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way | Each | 162.84 | 162.84 | 20.0 | False | None | None | False | None | False | 3256.8 | 0 | | 3552979 | 128518 | None | 3.4.3 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way | Each | 208.86 | 208.86 | 6.0 | False | None | None | False | None | False | 1253.16 | 0 | | 3552980 | 128518 | None | 3.4.4 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way | Each | 259.6 | 259.6 | 2.0 | False | None | None | False | None | False | 519.2 | 0 | | 3552981 | 128518 | None | 3.4.5 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way | Each | 307.98 | 307.98 | 10.0 | False | None | None | False | None | False | 3079.8 | 0 | | 3552982 | 128518 | None | 3.4.6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way | Each | 376.42 | 376.42 | 4.0 | False | None | None | False | None | False | 1505.68 | 0 | | 3552983 | 128518 | None | 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1-2 Module | Each | 161.66 | 161.66 | 20.0 | False | None | None | False | None | False | 3233.2 | 0 | | 3552984 | 128518 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module | Each | 206.5 | 206.5 | 6.0 | False | None | None | False | None | False | 1239.0 | 0 | | 3552985 | 128518 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module | Each | 276.12 | 276.12 | 2.0 | False | None | None | False | None | False | 552.24 | 0 | | 3552986 | 128518 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module | Each | 335.12 | 335.12 | 10.0 | False | None | None | False | None | False | 3351.2 | 0 | | 3552987 | 128518 | None | 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module | Each | 405.92 | 405.92 | 4.0 | False | None | None | False | None | False | 1623.68 | 0 | | 3552988 | 128518 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch | Each | 120.36 | 120.36 | 85.0 | False | None | None | False | None | False | 10230.6 | 0 | | 3552989 | 128518 | None | 3.6.2 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch | Each | 195.88 | 195.88 | 6.0 | False | None | None | False | None | False | 1175.28 | 0 | | 3552990 | 128518 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket | Each | 201.78 | 201.78 | 37.0 | False | None | None | False | None | False | 7465.86 | 0 | | 3552991 | 128518 | None | 3.6.8 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push | Each | 208.86 | 208.86 | 2.0 | False | None | None | False | None | False | 417.72 | 0 | | 3552992 | 128518 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. | Each | 421.26 | 421.26 | 12.0 | False | None | None | False | None | False | 5055.12 | 0 | | 3552993 | 128518 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch | Each | 384.68 | 384.68 | 11.0 | False | None | None | False | None | False | 4231.48 | 0 | | 3552994 | 128518 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket | Each | 278.48 | 278.48 | 18.0 | False | None | None | False | None | False | 5012.64 | 0 | | 3552995 | 128518 | None | 12.2.1 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell | Each | 290.28 | 290.28 | 2.0 | False | None | None | False | None | False | 580.56 | 0 | | 3552996 | 128518 | None | I-1.13 | Supplyin and Fixing Metal Fan Box with Round Hook. | No | 138.06 | 138.06 | 16.0 | False | None | None | False | None | False | 2208.96 | 0 | | 3552997 | 128518 | None | 1.2.1 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick | m | 77.88 | 77.88 | 250.0 | False | None | None | False | None | False | 19470.0 | 0 | | 3552998 | 128518 | None | 1.2.2 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick | m | 92.04 | 92.04 | 60.0 | False | None | None | False | None | False | 5522.4 | 0 | | 3552999 | 128518 | None | 1.3.1 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick | m | 80.24 | 80.24 | 180.0 | False | None | None | False | None | False | 14443.2 | 0 | | 3553000 | 128518 | None | 1.3.2 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick | m | 93.22 | 93.22 | 140.0 | False | None | None | False | None | False | 13050.8 | 0 | | 3553001 | 128518 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm | m | 30.68 | 30.68 | 250.0 | False | None | None | False | None | False | 7670.0 | 0 | | 3553002 | 128518 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm | m | 49.56 | 49.56 | 320.0 | False | None | None | False | None | False | 15859.2 | 0 | | 3553003 | 128518 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm | m | 74.34 | 74.34 | 200.0 | False | None | None | False | None | False | 14868.0 | 0 | | 3553004 | 128518 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm | m | 108.56 | 108.56 | 70.0 | False | None | None | False | None | False | 7599.2 | 0 | | 3553005 | 128518 | None | 2.3.6 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 10 sqmm | m | 197.06 | 197.06 | 50.0 | False | None | None | False | None | False | 9853.0 | 0 | | 3553006 | 128518 | None | 5.19.9 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II- Double Door 12 Way SP & N | Each | 2748.22 | 2748.22 | 2.0 | False | None | None | False | None | False | 5496.44 | 0 | | 3553007 | 128518 | None | 5.18.1 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP | Each | 489.7 | 489.7 | 16.0 | False | None | None | False | None | False | 7835.2 | 0 | | 3553008 | 128518 | None | 5.20.1 | Supplying, fixing and wiring Residual current circuit breaker (RCCB)
240/450V upto 300mA sensitivity on existing wood/ panel board.16A-25A 2 pole | Each | 5046.86 | 5046.86 | 1.0 | False | None | None | False | None | False | 5046.86 | 0 | | 3553009 | 128518 | None | I-32.03 | Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 (BESCOM SR 2022-23,Pno-9,32.03) 4 core 10 sqmm | Km | 139244.72 | 139244.72 | 0.1 | False | None | None | False | None | False | 13924.472 | 0 | | 3553010 | 128518 | None | I-21.05 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm | Km | 24645.48 | 24645.48 | 0.1 | False | None | None | False | None | False | 2464.548 | 0 | | 3553011 | 128518 | None | I-12.56 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia | No | 4141.8 | 4141.8 | 3.0 | False | None | None | False | None | False | 12425.4 | 0 | | 3553012 | 128518 | None | 12.58.2 | GI/Copper strips for grounding connections, using necessary fixing materials as required 25 x 3 mm GI strip | Mtr | 96.76 | 96.76 | 16.0 | False | None | None | False | None | False | 1548.16 | 0 | | 3553013 | 128518 | None | 11.3.2 | Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w | Each | 814.2 | 814.2 | 20.0 | False | None | None | False | None | False | 16284.0 | 0 | | 3553014 | 128518 | None | 11.5.2 | Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W | Each | 1044.3 | 1044.3 | 2.0 | False | None | None | False | None | False | 2088.6 | 0 | | 3553015 | 128518 | None | 11.11.3 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K | Each | 175.82 | 175.82 | 14.0 | False | None | None | False | None | False | 2461.48 | 0 | | 3553016 | 128518 | None | 11.8.2 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than 130lm/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts | No | 4748.32 | 4748.32 | 1.0 | False | None | None | False | None | False | 4748.32 | 0 | | 3553017 | 128518 | None | I-6.1 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. | Each | 1760.56 | 1760.56 | 3.0 | False | None | None | False | None | False | 5281.68 | 0 | | 3553018 | 128518 | None | 6.3.1 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model | Each | 3521.12 | 3521.12 | 9.0 | False | None | None | False | None | False | 31690.08 | 0 | | 3553019 | 128518 | None | I-12.46 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin | No | 74.34 | 74.34 | 19.0 | False | None | None | False | None | False | 1412.46 | 0 | | 3553020 | 128518 | None | 13.7.1 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders | Each | 143.96 | 143.96 | 32.0 | False | None | None | False | None | False | 4606.72 | 0 | | 3553021 | 128518 | None | I-13.11 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. | Each | 371.7 | 371.7 | 9.0 | False | None | None | False | None | False | 3345.3 | 0 | | 3553022 | 128518 | None | I-13.14 | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire | Each | 580.56 | 580.56 | 3.0 | False | None | None | False | None | False | 1741.68 | 0 | | 3553023 | 128518 | None | I-13.5 | Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. | Each | 191.16 | 191.16 | 1.0 | False | None | None | False | None | False | 191.16 | 0 | | 3553024 | 128518 | None | 7.1.3 | Supplying ...litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. 25Litres | Each | 12085.56 | 12085.56 | 1.0 | False | None | None | False | None | False | 12085.56 | 0 | | 3553025 | 128518 | None | 5.42.2 | Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16 SWG | Sq CM | 0.51 | 0.51 | 32000.0 | False | None | None | False | None | False | 16320.0 | 0 | | 3553026 | 128518 | None | 5.40.1 | Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips | Mtr | 2908.7 | 2908.7 | 2.5 | False | None | None | False | None | False | 7271.75 | 0 | | 3553027 | 128518 | None | 5.41.1 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm | Mtr | 359.9 | 359.9 | 1.5 | False | None | None | False | None | False | 539.85 | 0 | | 3553028 | 128518 | None | 5.41.4 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel | Mtr | 892.08 | 892.08 | 1.5 | False | None | None | False | None | False | 1338.12 | 0 | | 3553029 | 128518 | None | 5.15.9 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) FOUR POLE 100Amps 25kA | Each | 10014.66 | 10014.66 | 1.0 | False | None | None | False | None | False | 10014.66 | 0 | | 3553030 | 128518 | None | 5.18.4 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP | Each | 872.02 | 872.02 | 3.0 | False | None | None | False | None | False | 2616.06 | 0 | | 3553031 | 128518 | None | 5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN | Each | 3643.84 | 3643.84 | 1.0 | False | None | None | False | None | False | 3643.84 | 0 | | 3553032 | 128518 | None | 5.7.3 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 63Amps | Each | 473.18 | 473.18 | 3.0 | False | None | None | False | None | False | 1419.54 | 0 | | 3553033 | 128518 | None | 5.12.1 | Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 63Amps | Each | 8119.58 | 8119.58 | 1.0 | False | None | None | False | None | False | 8119.58 | 0 | | 3553034 | 128518 | None | I-5.27 | Supplying, fixing and wiring rotary selector switch suitable for Ammeter | Each | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 | | 3553035 | 128518 | None | I-5.28 | Supplying, fixing and wiring rotary selector switch suitable for Voltmeter | Each | 188.8 | 188.8 | 1.0 | False | None | None | False | None | False | 188.8 | 0 | | 3553036 | 128518 | None | I-5.29 | Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter | Each | 1681.5 | 1681.5 | 1.0 | False | None | None | False | None | False | 1681.5 | 0 | | 3553037 | 128518 | None | I-5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C | Each | 607.7 | 607.7 | 3.0 | False | None | None | False | None | False | 1823.1 | 0 | | 3553038 | 128518 | None | I-5.34 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound (48/6.32) | Each | 663.16 | 663.16 | 3.0 | False | None | None | False | None | False | 1989.48 | 0 | | 3553039 | 128518 | None | 5.43.1 | Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets.200 mm x 200 mm x 98 mm | Each | 2714.0 | 2714.0 | 1.0 | False | None | None | False | None | False | 2714.0 | 0 | | 3553040 | 128518 | None | I-5.31 | Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. | Each | 5180.2 | 5180.2 | 1.0 | False | None | None | False | None | False | 5180.2 | 0 |
|
|
|---|