| 1721497698000 | 0 | None | None | Buildings | Construction of the Banashankari temple samudaya bhavana At Wrad No 19 | 740105.18 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3570453 | 129631 | None | 001 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead SR 2021-22 Item No 2.7 B V-3 | Cum | 752.93 | 752.93 | 7.67 | False | None | None | False | None | False | 5774.9731 | 0 | | 3570454 | 129631 | None | 002 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork
shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates SR 2021-22 Pg No 15 Item No 2.1.2 V-1 | Cum | 5524.92 | 5524.92 | 0.74 | False | None | None | False | None | False | 4088.4408 | 0 | | 3570455 | 129631 | None | 003 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR 2021-22 Pg No 15 Item No 2.2.2.1 V-1 | Cum | 6473.55 | 6473.55 | 2.75 | False | None | None | False | None | False | 17802.2625 | 0 | | 3570456 | 129631 | None | 004 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) SR 2021-22 Pg No 84 Item No 11.32 V-1I | Kgs | 92.4 | 92.4 | 151.24 | False | None | None | False | None | False | 13974.576 | 0 | | 3570457 | 129631 | None | 005 | Additional For Formwork Foundation, Sub structure of Cross drainages SR 2021-22 Pg No 115 Item No 1 B V-1 | Sqm | 323.68 | 323.68 | 0.77 | False | None | None | False | None | False | 249.2336 | 0 | | 3570458 | 129631 | None | 006 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. SR 2021-22 Item no 6.2 V-2 | Cum | 6956.62 | 6956.62 | 31.03 | False | None | None | False | None | False | 215863.9186 | 0 | | 3570459 | 129631 | None | 007 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR 2021-22 Item No 8.2.2 V-2 | Sqm | 241.02 | 241.02 | 278.85 | False | None | None | False | None | False | 67208.427 | 0 | | 3570460 | 129631 | None | 009 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse Sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. SR 2021-22 Item No 9.12.1 V-2 | Sqm | 1053.69 | 1053.69 | 125.62 | False | None | None | False | None | False | 132364.5378 | 0 | | 3570461 | 129631 | None | 010 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR 2021-22 Item No 8.39 V-2 | Sqm | 97.85 | 97.85 | 266.24 | False | None | None | False | None | False | 26051.584 | 0 | | 3570462 | 129631 | None | 011 | Providing Sal wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications. SR 2021-22 Item No 12.4 V-2 | Cum | 62363.41 | 62363.41 | 0.06 | False | None | None | False | None | False | 3741.8046 | 0 | | 3570463 | 129631 | None | 012 | Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) SR 2021-22 Item no 12.15 V-2 | Sqm | 4692.68 | 4692.68 | 1.89 | False | None | None | False | None | False | 8869.1652 | 0 | | 3570464 | 129631 | None | 013 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding SR 2021-22 Item No 11.34A V-2 | Kg | 134.93 | 134.93 | 219.24 | False | None | None | False | None | False | 29582.0532 | 0 | | 3570465 | 129631 | None | 014 | Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR 2021-22 Item No 8.41 V-2 | Sqm | 133.9 | 133.9 | 10.44 | False | None | None | False | None | False | 1397.916 | 0 | | 3570466 | 129631 | None | 015 | Providing & fixing of 2-track 2-panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame sash shall be of 2 mm.Maximum possible size 1219mm 1219mm The cost is inclusive of all fixtures and separate charges for minor T Ps shall not be made | Sqm | 4237.42 | 4237.42 | 10.44 | False | None | None | False | None | False | 44238.6648 | 0 | | 3570467 | 129631 | None | 016 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. SR 2021-22 Item No 11.16.2 V-2 | Kg | 140.08 | 140.08 | 628.75 | False | None | None | False | None | False | 88075.3 | 0 | | 3570468 | 129631 | None | 017 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. SR 2021-22 Pg No 26 Sl No 7.38 V-1I | Sqm | 572.68 | 572.68 | 141.13 | False | None | None | False | None | False | 80822.3284 | 0 |
|