| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1719904841000 | 0 | None | None | Buildings | CONSTRUCTION OF BLOCK PUBLIC HEALTH UNIT (BPHU) AT NANJANGUD TLH, NANJANGUD TALUK, MYSORE DISTRICT. (Civil Works) | 3673472.73 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3433685 | 121688 | None | I-19.7.3 P-187 V-2 | Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. In cement mortar. | Cum | 1250.65 | 1250.65 | 11.04 | False | None | None | False | None | False | 13807.176 | 0 | | 3433686 | 121688 | None | I-1.1B P- V-3 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 10 m3 ) | Cum | 144.63 | 144.63 | 61.04 | False | None | None | False | None | False | 8828.2152 | 0 | | 3433687 | 121688 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Centering & formwork are included) COLUMNS FF | Cum | 14222.04 | 14222.04 | 9.0 | False | None | None | False | None | False | 127998.36 | 0 | | 3433688 | 121688 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Centering & formwork are included) RCC BEAMS FF | Cum | 13390.34 | 13390.34 | 13.17 | False | None | None | False | None | False | 176350.7778 | 0 | | 3433689 | 121688 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Centering & formwork are included)RCC SLAB FF | Cum | 12558.64 | 12558.64 | 19.51 | False | None | None | False | None | False | 245019.0664 | 0 | | 3433690 | 121688 | None | I-2.1.4 P-14 V-1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates . (Centering & formwork are included) FF | Cum | 11409.77 | 11409.77 | 3.35 | False | None | None | False | None | False | 38222.7295 | 0 | | 3433691 | 121688 | None | I-15.4 P-117 V-3 | Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy. FF | No. | 250.42 | 250.42 | 10.0 | False | None | None | False | None | False | 2504.2 | 0 | | 3433692 | 121688 | None | I-8.16 a P-43 V-2 | KSRB 4-5 :Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20 cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. FF | Sqm | 1519.71 | 1519.71 | 4.5 | False | None | None | False | None | False | 6838.695 | 0 | | 3433693 | 121688 | None | I-2.11a P-91 V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing andtechnical specification FF | Tonne | 109813.3 | 109813.3 | 4.22 | False | None | None | False | None | False | 463412.126 | 0 | | 3433694 | 121688 | None | I-4.21 P-15 S.R 2018-19 | KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering ( labour charges only ) as per specifications. Specification No. KBS. (P. No. 14/ I.No. 4.21 of PWD 2018-19) FF | Rmtr | 40.51 | 40.51 | 54.0 | False | None | None | False | None | False | 2187.54 | 0 | | 3433695 | 121688 | None | A.R | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. | Rmtr | 89.61 | 89.61 | 54.0 | False | None | None | False | None | False | 4838.94 | 0 | | 3433696 | 121688 | None | I-6.32 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF | Sqm | 1608.1 | 1608.1 | 164.48 | False | None | None | False | None | False | 264500.288 | 0 | | 3433697 | 121688 | None | I-6.34 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF | Sqm | 1355.22 | 1355.22 | 67.33 | False | None | None | False | None | False | 91246.9626 | 0 | | 3433698 | 121688 | None | I-12.13.1 P-100 V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. FF | Cum | 121300.75 | 121300.75 | 0.99 | False | None | None | False | None | False | 120087.7425 | 0 | | 3433699 | 121688 | None | I-12.51 P-104 V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. FF | Nos | 1247.19 | 1247.19 | 12.0 | False | None | None | False | None | False | 14966.28 | 0 | | 3433700 | 121688 | None | I-12.60 P-105 V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete FF | Nos | 1291.39 | 1291.39 | 12.0 | False | None | None | False | None | False | 15496.68 | 0 | | 3433701 | 121688 | None | I-12.61 P-105 V-2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. FF | Nos | 1215.28 | 1215.28 | 12.0 | False | None | None | False | None | False | 14583.36 | 0 | | 3433702 | 121688 | None | I-12.62 P-105 V-2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete FF | Nos | 290.93 | 290.93 | 24.0 | False | None | None | False | None | False | 6982.32 | 0 | | 3433703 | 121688 | None | I-12.63 P-105 V-2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete FF | Nos | 159.58 | 159.58 | 24.0 | False | None | None | False | None | False | 3829.92 | 0 | | 3433704 | 121688 | None | I-12.64 P-105 V-2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms FF | Nos | 67.52 | 67.52 | 12.0 | False | None | None | False | None | False | 810.24 | 0 | | 3433705 | 121688 | None | I-12.75.1 P-107 V-2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) FF | Nos | 337.58 | 337.58 | 24.0 | False | None | None | False | None | False | 8101.92 | 0 | | 3433706 | 121688 | None | I-10.6.3 P-69 V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm. FF | Nos | 73.65 | 73.65 | 72.0 | False | None | None | False | None | False | 5302.8 | 0 | | 3433707 | 121688 | None | I-309 (0115) P-XI S.R 2018-19 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications. FF | Rmtr | 15.45 | 15.45 | 77.6 | False | None | None | False | None | False | 1198.92 | 0 | | 3433708 | 121688 | None | I-12.57.6 P-105 V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial FF | Sqm | 4077.93 | 4077.93 | 28.56 | False | None | None | False | None | False | 116465.6808 | 0 | | 3433709 | 121688 | None | I-12.90 P-112 V-2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made FF | Sqm | 8266.35 | 8266.35 | 27.0 | False | None | None | False | None | False | 223191.45 | 0 | | 3433710 | 121688 | None | I-12.85 P-109 V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). FF | Sqm | 7020.38 | 7020.38 | 1.44 | False | None | None | False | None | False | 10109.3472 | 0 | | 3433711 | 121688 | None | I-11.34A P-86 V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding FF | Kg | 206.23 | 206.23 | 597.24 | False | None | None | False | None | False | 123168.8052 | 0 | | 3433712 | 121688 | None | I-12.96 P-112 V-2 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire
resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden blockin all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. FF | m | 789.32 | 789.32 | 19.8 | False | None | None | False | None | False | 15628.536 | 0 | | 3433713 | 121688 | None | I-12.97 P-112 V-2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames FF | Sqm | 3933.08 | 3933.08 | 6.3 | False | None | None | False | None | False | 24778.404 | 0 | | 3433714 | 121688 | None | I-12.59 P-105 V-2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. FF | Nos | 1367.5 | 1367.5 | 12.0 | False | None | None | False | None | False | 16410.0 | 0 | | 3433715 | 121688 | None | I-11.25.2 P-84 V-2 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. FF | Kgs | 166.95 | 166.95 | 241.92 | False | None | None | False | None | False | 40388.544 | 0 | | 3433716 | 121688 | None | I-11.35.1.1 P-86 V-2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. FF | Kg | 554.85 | 554.85 | 72.0 | False | None | None | False | None | False | 39949.2 | 0 | | 3433717 | 121688 | None | I-11.37.1 P-89 V-2 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. FF | Sqm | 1212.82 | 1212.82 | 7.2 | False | None | None | False | None | False | 8732.304 | 0 | | 3433718 | 121688 | None | I-8.10 P-43 V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Inside) FF | Sqm | 259.01 | 259.01 | 142.71 | False | None | None | False | None | False | 36963.3171 | 0 | | 3433719 | 121688 | None | I-8.5.2 P-42 V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside) FF | Sqm | 428.42 | 428.42 | 317.43 | False | None | None | False | None | False | 135993.3606 | 0 | | 3433720 | 121688 | None | I-8.51 P-50 V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. FF | Sqm | 122.76 | 122.76 | 588.51 | False | None | None | False | None | False | 72245.4876 | 0 | | 3433721 | 121688 | None | I-8.8 P-42 V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( Outside) FF | Sqm | 455.42 | 455.42 | 222.9 | False | None | None | False | None | False | 101513.118 | 0 | | 3433722 | 121688 | None | I-8.16.2 P-43 V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster mesh 150mm wide. FF | Rmtr | 46.65 | 46.65 | 807.0 | False | None | None | False | None | False | 37646.55 | 0 | | 3433723 | 121688 | None | I-10.5.2 P-69 S.R 2018-19 | Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. | Sqm | 262.53 | 262.53 | 10.0 | False | None | None | False | None | False | 2625.3 | 0 | | 3433724 | 121688 | None | I-8.79 P-54 V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. FF | Rmtr | 63.83 | 63.83 | 256.0 | False | None | None | False | None | False | 16340.48 | 0 | | 3433725 | 121688 | None | I-9.21.2 P-62 V-2 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).).Size of Tile 600x600 mm FF | Sqm | 1519.71 | 1519.71 | 158.92 | False | None | None | False | None | False | 241512.3132 | 0 | | 3433726 | 121688 | None | I-9.20.2 P-62 V-2 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge Size of Tile 600x600 mm FF | Sqm | 256.56 | 256.56 | 158.92 | False | None | None | False | None | False | 40772.5152 | 0 | | 3433727 | 121688 | None | I-8.2.1 P-41 V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 362.13 | 362.13 | 83.51 | False | None | None | False | None | False | 30241.4763 | 0 | | 3433728 | 121688 | None | I-9.23 P-63 V-2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. FF | Sqm | 3027.15 | 3027.15 | 40.67 | False | None | None | False | None | False | 123114.1905 | 0 | | 3433729 | 121688 | None | I-7.18 P-23 V-2 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. FF | Cum | 2475.98 | 2475.98 | 2.59 | False | None | None | False | None | False | 6412.7882 | 0 | | 3433730 | 121688 | None | I-15.7 P-150 V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) FF | Cum | 754.95 | 754.95 | 8.34 | False | None | None | False | None | False | 6296.283 | 0 | | 3433731 | 121688 | None | I-9.11 P-60 V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. FF | Sqm | 1091.3 | 1091.3 | 8.34 | False | None | None | False | None | False | 9101.442 | 0 | | 3433732 | 121688 | None | I-9.39 P-65 V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. FF | Sqm | 1778.73 | 1778.73 | 42.84 | False | None | None | False | None | False | 76200.7932 | 0 | | 3433733 | 121688 | None | I-9.14 P-61 V-2 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. FF | Sqm | 433.33 | 433.33 | 51.18 | False | None | None | False | None | False | 22177.8294 | 0 | | 3433734 | 121688 | None | I-8.39 P-48 V-2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 194.49 | 194.49 | 588.51 | False | None | None | False | None | False | 114459.3099 | 0 | | 3433735 | 121688 | None | I-8.31 P-46 V-2 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 272.59 | 272.59 | 222.9 | False | None | None | False | None | False | 60760.311 | 0 | | 3433736 | 121688 | None | I-8.34.3 P-47 V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 61.38 | 61.38 | 28.44 | False | None | None | False | None | False | 1745.6472 | 0 | | 3433737 | 121688 | None | I-8.40 P-48 V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 141.17 | 141.17 | 28.44 | False | None | None | False | None | False | 4014.8748 | 0 | | 3433738 | 121688 | None | I-8.34.1 P-47 V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 65.06 | 65.06 | 68.54 | False | None | None | False | None | False | 4459.2124 | 0 | | 3433739 | 121688 | None | I-8.47 P-49 V-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 165.72 | 165.72 | 68.54 | False | None | None | False | None | False | 11358.4488 | 0 | | 3433740 | 121688 | None | I-6.27 P-16 V-2 | Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor I level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. FF | Sqm | 1005.37 | 1005.37 | 76.56 | False | None | None | False | None | False | 76971.1272 | 0 | | 3433741 | 121688 | None | I-15.1 P-133 V-2 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. FF | Sqm | 1002.91 | 1002.91 | 172.0 | False | None | None | False | None | False | 172500.52 | 0 | | 3433742 | 121688 | None | I-10.1.7 P-113 V-5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3 | Rmtr | 504.52 | 504.52 | 24.0 | False | None | None | False | None | False | 12108.48 | 0 |
| | 1719904841000 | 0 | None | None | Buildings | CONSTRUCTION OF BLOCK PUBLIC HEALTH UNIT (BPHU) AT NANJANGUD TLH, NANJANGUD TALUK, MYSORE DISTRICT. (Water Supply & Sanitary Works) | 204738.58 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3433743 | 121689 | None | I-14.28.2.2 P-136 V-2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40mm dia pipes | Each | 112.9 | 112.9 | 8.0 | False | None | None | False | None | False | 903.2 | 0 | | 3433744 | 121689 | None | I-16.7.4 P-191 V-5 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with: 50mm nominal bore pipes | m | 170.58 | 170.58 | 15.0 | False | None | None | False | None | False | 2558.7 | 0 | | 3433745 | 121689 | None | I-10.1.5 P-113 V-5 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 75mm dia., 6 kg/sqcm & class 3 | m | 257.71 | 257.71 | 40.0 | False | None | None | False | None | False | 10308.4 | 0 | | 3433746 | 121689 | None | I-10.1.7 P-113 V-5 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for : PVC pipes 110mm dia., 6 kg/sqcm & class 3 | m | 483.52 | 483.52 | 35.0 | False | None | None | False | None | False | 16923.2 | 0 | | 3433747 | 121689 | None | I-13.47 P-125 V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter | m | 241.76 | 241.76 | 20.0 | False | None | None | False | None | False | 4835.2 | 0 | | 3433748 | 121689 | None | I-14.31 P-136 V-2 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 1497.18 | 1497.18 | 4.0 | False | None | None | False | None | False | 5988.72 | 0 | | 3433749 | 121689 | None | I-14.44 P-138 V-2 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. | Each | 13774.09 | 13774.09 | 4.0 | False | None | None | False | None | False | 55096.36 | 0 | | 3433750 | 121689 | None | I-14.11.2 P-134 V-2 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm | Nos. | 6236.63 | 6236.63 | 2.0 | False | None | None | False | None | False | 12473.26 | 0 | | 3433751 | 121689 | None | I-166 P-A16 V-2 | C.P. Brass stop cock (concealed) 15 mm | Nos. | 644.28 | 644.28 | 4.0 | False | None | None | False | None | False | 2577.12 | 0 | | 3433752 | 121689 | None | I-14.7.1 P-124 V-2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps | Each | 3782.23 | 3782.23 | 4.0 | False | None | None | False | None | False | 15128.92 | 0 | | 3433753 | 121689 | None | I-13.32.1 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes | m | 379.79 | 379.79 | 5.0 | False | None | None | False | None | False | 1898.95 | 0 | | 3433754 | 121689 | None | I-13.32.2 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes | m | 465.11 | 465.11 | 45.0 | False | None | None | False | None | False | 20929.95 | 0 | | 3433755 | 121689 | None | I-13.33.2 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 20 mm nominal dia Pipes | m | 266.3 | 266.3 | 20.0 | False | None | None | False | None | False | 5326.0 | 0 | | 3433756 | 121689 | None | I-13.33.3 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 25 mm nominal dia Pipes | m | 363.25 | 363.25 | 30.0 | False | None | None | False | None | False | 10897.5 | 0 | | 3433757 | 121689 | None | I-109 P-A15 V-2 | Brass full way valve with C.I. wheel (screwed end) 25 mm dia | Nos. | 460.2 | 460.2 | 4.0 | False | None | None | False | None | False | 1840.8 | 0 | | 3433758 | 121689 | None | I-16.9 P-191 V-5 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. | Each | 6693.15 | 6693.15 | 2.0 | False | None | None | False | None | False | 13386.3 | 0 | | 3433759 | 121689 | None | I-12.112.2 P-90 S.R 2018-19 | Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead). - 15cms x 10cms | Each | 330.4 | 330.4 | 2.0 | False | None | None | False | None | False | 660.8 | 0 | | 3433760 | 121689 | None | I-13.34 P-123 V-2 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. | l | 11.04 | 11.04 | 1000.0 | False | None | None | False | None | False | 11040.0 | 0 | | 3433761 | 121689 | None | A.R | Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards 10Cms X 7.5Cms | Nos. | 371.7 | 371.7 | 6.0 | False | None | None | False | None | False | 2230.2 | 0 | | 3433762 | 121689 | None | A.R | Air Vent Cowel 75mm | Nos. | 413.0 | 413.0 | 1.0 | False | None | None | False | None | False | 413.0 | 0 | | 3433763 | 121689 | None | A.R | Air Vent Cowel 110mm | Nos. | 590.0 | 590.0 | 1.0 | False | None | None | False | None | False | 590.0 | 0 | | 3433764 | 121689 | None | A.R | Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). | Nos. | 2183.0 | 2183.0 | 4.0 | False | None | None | False | None | False | 8732.0 | 0 |
| | 1719904841000 | 0 | None | None | Buildings | CONSTRUCTION OF BLOCK PUBLIC HEALTH UNIT (BPHU) AT NANJANGUD TLH, NANJANGUD TALUK, MYSORE DISTRICT. (Electrical Works) | 1014436.94 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3433765 | 121690 | None | 2.2.1 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box. | Point | 326.94 | 326.94 | 12.0 | False | None | None | False | None | False | 3923.28 | 0 | | 3433766 | 121690 | None | 2.2.2 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch | Point | 460.64 | 460.64 | 15.0 | False | None | None | False | None | False | 6909.6 | 0 | | 3433767 | 121690 | None | 2.2.3 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch | Point | 674.55 | 674.55 | 22.0 | False | None | None | False | None | False | 14840.1 | 0 | | 3433768 | 121690 | None | 2.2.4 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches | Point | 822.83 | 822.83 | 5.0 | False | None | None | False | None | False | 4114.15 | 0 | | 3433769 | 121690 | None | 3.4.1 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-2 Way | Each | 167.73 | 167.73 | 10.0 | False | None | None | False | None | False | 1677.3 | 0 | | 3433770 | 121690 | None | 3.4.3 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5Way | Each | 215.13 | 215.13 | 3.0 | False | None | None | False | None | False | 645.39 | 0 | | 3433771 | 121690 | None | 3.4.4 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6Way | Each | 267.39 | 267.39 | 2.0 | False | None | None | False | None | False | 534.78 | 0 | | 3433772 | 121690 | None | 3.4.5 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 Way | Each | 317.22 | 317.22 | 3.0 | False | None | None | False | None | False | 951.66 | 0 | | 3433773 | 121690 | None | 3.4.6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12Way | Each | 387.71 | 387.71 | 18.0 | False | None | None | False | None | False | 6978.78 | 0 | | 3433774 | 121690 | None | 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module | Each | 166.51 | 166.51 | 10.0 | False | None | None | False | None | False | 1665.1 | 0 | | 3433775 | 121690 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module | Each | 212.7 | 212.7 | 3.0 | False | None | None | False | None | False | 638.1 | 0 | | 3433776 | 121690 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module | Each | 284.4 | 284.4 | 2.0 | False | None | None | False | None | False | 568.8 | 0 | | 3433777 | 121690 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module | Each | 345.17 | 345.17 | 3.0 | False | None | None | False | None | False | 1035.51 | 0 | | 3433778 | 121690 | None | 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module | Each | 418.1 | 418.1 | 18.0 | False | None | None | False | None | False | 7525.8 | 0 | | 3433779 | 121690 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch | Each | 123.97 | 123.97 | 109.0 | False | None | None | False | None | False | 13512.73 | 0 | | 3433780 | 121690 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket | Each | 207.83 | 207.83 | 55.0 | False | None | None | False | None | False | 11430.65 | 0 | | 3433781 | 121690 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module | Each | 433.9 | 433.9 | 12.0 | False | None | None | False | None | False | 5206.8 | 0 | | 3433782 | 121690 | None | 3.6.7 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch | Each | 218.77 | 218.77 | 2.0 | False | None | None | False | None | False | 437.54 | 0 | | 3433783 | 121690 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch | Each | 396.22 | 396.22 | 8.0 | False | None | None | False | None | False | 3169.76 | 0 | | 3433784 | 121690 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket | Each | 286.83 | 286.83 | 10.0 | False | None | None | False | None | False | 2868.3 | 0 | | 3433785 | 121690 | None | I-1.13 | Supplying And Fixing Metal Fan Box with Round Hook | No | 142.2 | 142.2 | 12.0 | False | None | None | False | None | False | 1706.4 | 0 | | 3433786 | 121690 | None | 1.2.1 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick | m | 80.22 | 80.22 | 370.0 | False | None | None | False | None | False | 29681.4 | 0 | | 3433787 | 121690 | None | 1.2.2 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick | m | 94.8 | 94.8 | 800.0 | False | None | None | False | None | False | 75840.0 | 0 | | 3433788 | 121690 | None | 1.2.3 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2.5mm thick | m | 125.19 | 125.19 | 100.0 | False | None | None | False | None | False | 12519.0 | 0 | | 3433789 | 121690 | None | 1.3.1 | Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick | m | 82.65 | 82.65 | 200.0 | False | None | None | False | None | False | 16530.0 | 0 | | 3433790 | 121690 | None | 1.3.2 | Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick | m | 96.02 | 96.02 | 150.0 | False | None | None | False | None | False | 14403.0 | 0 | | 3433791 | 121690 | None | 1.3.3 | Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick | m | 120.32 | 120.32 | 50.0 | False | None | None | False | None | False | 6016.0 | 0 | | 3433792 | 121690 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm | m | 31.6 | 31.6 | 225.0 | False | None | None | False | None | False | 7110.0 | 0 | | 3433793 | 121690 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm | m | 51.05 | 51.05 | 750.0 | False | None | None | False | None | False | 38287.5 | 0 | | 3433794 | 121690 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm | m | 76.57 | 76.57 | 300.0 | False | None | None | False | None | False | 22971.0 | 0 | | 3433795 | 121690 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm | m | 111.82 | 111.82 | 260.0 | False | None | None | False | None | False | 29073.2 | 0 | | 3433796 | 121690 | None | 5.19.4 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure 12 Way SP & N | Each | 2264.29 | 2264.29 | 2.0 | False | None | None | False | None | False | 4528.58 | 0 | | 3433797 | 121690 | None | 5.19.11 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4 Way TP & N | Each | 4907.79 | 4907.79 | 1.0 | False | None | None | False | None | False | 4907.79 | 0 | | 3433798 | 121690 | None | 5.18.1 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP | Each | 504.39 | 504.39 | 35.0 | False | None | None | False | None | False | 17653.65 | 0 | | 3433799 | 121690 | None | 5.18.4 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP | Each | 898.18 | 898.18 | 4.0 | False | None | None | False | None | False | 3592.72 | 0 | | 3433800 | 121690 | None | 5.18.9 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63Amps TPN | Each | 3753.16 | 3753.16 | 2.0 | False | None | None | False | None | False | 7506.32 | 0 | | 3433801 | 121690 | None | 5.20.8 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel boar 32-40 Amps 4 pole | Each | 6255.66 | 6255.66 | 1.0 | False | None | None | False | None | False | 6255.66 | 0 | | 3433802 | 121690 | None | I-32.07 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.
3.5 core 25 sqmm | Km | 169605.42 | 169605.42 | 0.1 | False | None | None | False | None | False | 16960.542 | 0 | | 3433803 | 121690 | None | I-21.05 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 2.5 sqmm to 25 sqmm | Km | 25384.84 | 25384.84 | 0.1 | False | None | None | False | None | False | 2538.484 | 0 | | 3433804 | 121690 | None | SR 19-20 6.11.2 | Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only). 25mm dia | Each | 99.12 | 99.12 | 8.0 | False | None | None | False | None | False | 792.96 | 0 | | 3433805 | 121690 | None | BSR 49.05 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 50mm | Mtr | 451.94 | 451.94 | 10.0 | False | None | None | False | None | False | 4519.4 | 0 | | 3433806 | 121690 | None | SR 19-20-6.17.7 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 25 sqmm Long Barrel | Each | 9.44 | 9.44 | 8.0 | False | None | None | False | None | False | 75.52 | 0 | | 3433807 | 121690 | None | I-29.03 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. In Hard Soil | Cum | 472.79 | 472.79 | 50.0 | False | None | None | False | None | False | 23639.5 | 0 | | 3433808 | 121690 | None | I-12.57 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. | No | 5172.74 | 5172.74 | 2.0 | False | None | None | False | None | False | 10345.48 | 0 | | 3433809 | 121690 | None | 12.58.2 | GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip | m | 103.31 | 103.31 | 20.0 | False | None | None | False | None | False | 2066.2 | 0 | | 3433810 | 121690 | None | 11.3.2 | Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w | Each | 838.63 | 838.63 | 27.0 | False | None | None | False | None | False | 22643.01 | 0 | | 3433811 | 121690 | None | 11.5.2 | Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @50/60Hz & Power factor greater than 0.9 along with CE
approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W | Each | 1075.63 | 1075.63 | 10.0 | False | None | None | False | None | False | 10756.3 | 0 | | 3433812 | 121690 | None | 11.11.3 | Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K | Each | 181.09 | 181.09 | 4.0 | False | None | None | False | None | False | 724.36 | 0 | | 3433813 | 121690 | None | I-12.46 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin | No | 76.57 | 76.57 | 4.0 | False | None | None | False | None | False | 306.28 | 0 | | 3433814 | 121690 | None | 11.8.2 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering
superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40W | Each | 4890.77 | 4890.77 | 1.0 | False | None | None | False | None | False | 4890.77 | 0 | | 3433815 | 121690 | None | I-6.1 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. | Each | 1813.38 | 1813.38 | 4.0 | False | None | None | False | None | False | 7253.52 | 0 | | 3433816 | 121690 | None | 6.3.1 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model | Each | 3626.75 | 3626.75 | 12.0 | False | None | None | False | None | False | 43521.0 | 0 | | 3433817 | 121690 | None | 13.7.1 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders | Each | 148.28 | 148.28 | 37.0 | False | None | None | False | None | False | 5486.36 | 0 | | 3433818 | 121690 | None | I-13.1 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. | Each | 207.83 | 207.83 | 12.0 | False | None | None | False | None | False | 2493.96 | 0 | | 3433819 | 121690 | None | I-13.13 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. | Each | 859.29 | 859.29 | 4.0 | False | None | None | False | None | False | 3437.16 | 0 | | 3433820 | 121690 | None | 13.4.1 | Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5m long M.S.Bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length | Each | 1775.7 | 1775.7 | 1.0 | False | None | None | False | None | False | 1775.7 | 0 | | 3433821 | 121690 | None | I-13.5 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. | Each | 196.89 | 196.89 | 1.0 | False | None | None | False | None | False | 196.89 | 0 | | 3433822 | 121690 | None | 6.8.5 | Supplying of .. TR Invertor type split Air conditioners suitable for
operation on A/C supply single phase 50 Hz 230 V with hermetically
sealed inverter compressor with air cooled condenser, latest R410A /
R-32 refrigerant fan motor, start & run capacitors, relay & over load
protector internal unit, with one indoor & one outdoor unit The
condenser unit will be placed outside the room avoid noise including
standard length of suitable size copper tubing covered with nitrile
rubber insulation tube. suitable capacity 3 core sheathed/ PVC
copper cable and a battery operated wireless remote unit. 5 star-1.5 Ton capacity | Nos | 68493.87 | 68493.87 | 4.0 | False | None | None | False | None | False | 273975.48 | 0 | | 3433823 | 121690 | None | I-6.12 | Installation charges for split type air conditioner with allied works for
one indoor and one outdoor unit is to be mounted on suitable Angle
Iron support upto 3.0 Ton split/cassette type A/C. | Nos | 3858.9 | 3858.9 | 4.0 | False | None | None | False | None | False | 15435.6 | 0 | | 3433824 | 121690 | None | 6.13.1 | Supplying and installation of insulated refrigerant copper tubing of
5/8" and 3/8" with polythene foam insulation 3 core 80 stand
copper wiring between indoor and outdoor unit Leak testing oil
and gas charging for additional piping length of tube. | Mtr | 1882.65 | 1882.65 | 30.0 | False | None | None | False | None | False | 56479.5 | 0 | | 3433825 | 121690 | None | 5.42.2 | Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete 16SWG | Sq CM | 0.52 | 0.52 | 50000.0 | False | None | None | False | None | False | 26000.0 | 0 | | 3433826 | 121690 | None | 5.40.1 | Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 100Amps 4x30x6mm Aluminum Strips | m | 2995.96 | 2995.96 | 3.0 | False | None | None | False | None | False | 8987.88 | 0 | | 3433827 | 121690 | None | 5.41.1 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 40x40x6mm | m | 370.7 | 370.7 | 10.0 | False | None | None | False | None | False | 3707.0 | 0 | | 3433828 | 121690 | None | 5.41.4 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 50x100x50x6mm C channel | m | 918.84 | 918.84 | 10.0 | False | None | None | False | None | False | 9188.4 | 0 | | 3433829 | 121690 | None | 5.15.9 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 100 A 25 ka | Each | 10315.1 | 10315.1 | 1.0 | False | None | None | False | None | False | 10315.1 | 0 | | 3433830 | 121690 | None | I-5.33 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy. | Each | 11321.45 | 11321.45 | 1.0 | False | None | None | False | None | False | 11321.45 | 0 | | 3433831 | 121690 | None | I-5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C | Each | 625.93 | 625.93 | 3.0 | False | None | None | False | None | False | 1877.79 | 0 | | 3433832 | 121690 | None | I-5.34 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound (48/6.32) | Each | 683.05 | 683.05 | 3.0 | False | None | None | False | None | False | 2049.15 | 0 | | 3433833 | 121690 | None | 3.6.12 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6 | Each | 409.59 | 409.59 | 9.0 | False | None | None | False | None | False | 3686.31 | 0 | | 3433834 | 121690 | None | 3.6.11 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket | Each | 189.6 | 189.6 | 4.0 | False | None | None | False | None | False | 758.4 | 0 | | 3433835 | 121690 | None | I-8.1 | Supplying and drawing UTP-CAT 6E LAN cable. | m | 46.19 | 46.19 | 225.0 | False | None | None | False | None | False | 10392.75 | 0 | | 3433836 | 121690 | None | 8.10.1 | Supplying & fixing of I/O socket with back box. Single I/O | Each | 595.55 | 595.55 | 9.0 | False | None | None | False | None | False | 5359.95 | 0 | | 3433837 | 121690 | None | 8.4.1 | Supplying & Fixing of switch mounting rack with power manager & Cable manager (85/11.4) 4U with 450mm depth | Each | 5945.74 | 5945.74 | 1.0 | False | None | None | False | None | False | 5945.74 | 0 | | 3433838 | 121690 | None | 8.9.11 | Supplying fixing of Network Switches. 16 port 10/100/1000 Switch | Each | 7827.18 | 7827.18 | 1.0 | False | None | None | False | None | False | 7827.18 | 0 | | 3433839 | 121690 | None | 8.11.2 | Supplying & fixing of ..mtrs. Cat 6Patch Cable. 2Mtr | Each | 312.36 | 312.36 | 9.0 | False | None | None | False | None | False | 2811.24 | 0 | | 3433840 | 121690 | None | 8.12.3 | Supplying & Fixing of Patch panel for Lan Cabling. 16 Port 10/100 patch panel | Each | 3706.97 | 3706.97 | 1.0 | False | None | None | False | None | False | 3706.97 | 0 | | 3433841 | 121690 | None | 8.13.1 | Supplying and fixing of MDF krone junction box with KRONE
Module / Telephone cable termination. 10 Pair | Rmtr | 419.31 | 419.31 | 1.0 | False | None | None | False | None | False | 419.31 | 0 | | 3433842 | 121690 | None | 8.2.2 | Supplying and drawing PVC flexible 2 pair telepone unarmoured tinned copper cable. | m | 25.52 | 25.52 | 100.0 | False | None | None | False | None | False | 2552.0 | 0 |
|
|
|---|