createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1720004692347 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1230.00 emd 49000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 01-08-2024 16:00:00 tenderQueryClose 26-07-2024 16:00:00 technicalBidOpen 02-08-2024 16:10:00 publishedDate 20-07-2024 17:27:44 publishedByPost EWHFWD_EE_EEOFF_MYS publishedByUser KPE12441 - H SRINIVASAGOWDA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Manasa splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9449843319 tenderSupplierList None
tenderSchedule	createdTs 1720004692372 version 5 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT406 title CONSTRUCTION OF BLOCK LEVEL PUBLIC HEALTH UNIT AT GH BANTWAL IN DAKSHINA KANNADA DISTRICT.(SECOND FLOOR) description CONSTRUCTION OF BLOCK LEVEL PUBLIC HEALTH UNIT AT GH BANTWAL IN DAKSHINA KANNADA DISTRICT. category WORKS categoryText Works ecv 4917641.11 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3523 locationName EWHFWD Executive Engineer Office Mysore provisionalAmount 5000000.0 groupOverheadTotal 0.0 fileNumber KHSDRP/AEEMNG/BPHU/15TH-FC/DKBANTWAL
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1720004692000 1 None None Buildings CONSTRUCTION OF BLOCK LEVEL PUBLIC HEALTH UNIT AT GH BANTWAL IN DAKSHINA KANNADA DISTRICT.(CIVIL WORKS) (SECOND FLOOR) 4308044.94 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3443911 122292 None V1P18S2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification) t 120590.9 120590.9 5.87 False None None False None False 707868.583 0 3443912 122292 None V1P16S2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Columns including Centring and form works . . Cum 15193.67 15193.67 6.19 False None None False None False 94048.8173 0 3443913 122292 None V1P16S2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Chejjas including Centring and form works . Cum 12959.31 12959.31 2.59 False None None False None False 33564.6129 0 3443914 122292 None V1P16S2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Lintles and Beams including Centring and form works . Cum 14299.92 14299.92 14.31 False None None False None False 204631.8552 0 3443915 122292 None V1P16S2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Roof slab including Centring and form works . Cum 13406.18 13406.18 33.01 False None None False None False 442538.0018 0 3443916 122292 None V2P9S5.7 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification. I.S. 3620/1979 having compressive strength not less then 3.5 N/mm2 for saturated dry samples For super structure in CM 1:6. Cum 9105.96 9105.96 51.6 False None None False None False 469867.536 0 3443917 122292 None V2P17S6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1488.23 1488.23 221.1 False None None False None False 329047.653 0 3443918 122292 None V2P109S12.86 Providing and fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8 2.0mm Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T and Ps shall not be made) Sqm 7265.89 7265.89 36.45 False None None False None False 264841.6905 0 3443919 122292 None V2P109S12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7709.4 7709.4 1.62 False None None False None False 12489.228 0 3443920 122292 None V2P86S11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc Kgs 246.69 246.69 685.26 False None None False None False 169046.7894 0 3443921 122292 None V2P100S12.13.1 Providing sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as specifications. Cum 133205.78 133205.78 0.55 False None None False None False 73263.179 0 3443922 122292 None V2P105S12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick Both side commercial. Sqm 4478.16 4478.16 30.7 False None None False None False 137479.512 0 3443923 122292 None V2P111 S12.93.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately).Size 62 x 125mm m 1029.9 1029.9 20.4 False None None False None False 21009.96 0 3443924 122292 None V2P112S12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness Sqm 4697.89 4697.89 7.5 False None None False None False 35234.175 0 3443925 122292 None V2P105S12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1369.6 1369.6 11.0 False None None False None False 15065.6 0 3443926 122292 None V2P69S10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Nos 80.88 80.88 11.0 False None None False None False 889.68 0 3443927 122292 None V2P105S12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Nos 1501.71 1501.71 11.0 False None None False None False 16518.81 0 3443928 122292 None V2P105S12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Nos 1418.13 1418.13 11.0 False None None False None False 15599.43 0 3443929 122292 None V2P105S12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. Complete Nos 1334.55 1334.55 11.0 False None None False None False 14680.05 0 3443930 122292 None V2P105S12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete Nos 319.48 319.48 22.0 False None None False None False 7028.56 0 3443931 122292 None V2P105S12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete Nos 175.24 175.24 22.0 False None None False None False 3855.28 0 3443932 122292 None V2P105S12.64 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms Nos 74.14 74.14 11.0 False None None False None False 815.54 0 3443933 122292 None V2P107S12.75.1 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) Nos 370.71 370.71 33.0 False None None False None False 12233.43 0 3443934 122292 None V2PA-25S447 Providing & Fixing of honnewood beeding 100mm wide. Rmtr 33.7 33.7 65.6 False None None False None False 2210.72 0 3443935 122292 None V2P150S15.7 Water proofing works.Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydrostatic pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel reinforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) Sqm 829.04 829.04 9.72 False None None False None False 8058.2688 0 3443936 122292 None V2P60S9.12.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1543.5 1543.5 192.88 False None None False None False 297710.28 0 3443937 122292 None V2P60S9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 1198.4 1198.4 9.7 False None None False None False 11624.48 0 3443938 122292 None V2P71S10.14 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete Sqm 1490.92 1490.92 52.9 False None None False None False 78869.668 0 3443939 122292 None V2P63S9.28 Providing and laying flooring and steps machine cut granite slabs 40mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications Sqm 5768.23 5768.23 15.9 False None None False None False 91714.857 0 3443940 122292 None V2P43S8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge Sqm 284.43 284.43 190.5 False None None False None False 54183.915 0 3443941 122292 None V2P41S8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding ,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ( Inside) Sqm 376.1 376.1 596.2 False None None False None False 224230.82 0 3443942 122292 None V2P42S8.9 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) finished rough to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( outside) Sqm 518.99 518.99 256.4 False None None False None False 133069.036 0 3443943 122292 None V2P43S8.16.1 Providing and fixing plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment )Plaster mesh Rmtr 45.83 45.83 143.61 False None None False None False 6581.6463 0 3443944 122292 None V2P 47S8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-change Sqm 71.45 71.45 40.6 False None None False None False 2900.87 0 3443945 122292 None V2P 48S8.40 Painting with synthetic enamel paint of approved brand and manu facture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 155.02 155.02 40.6 False None None False None False 6293.812 0 3443946 122292 None V2P 50S8.51 Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 134.8 134.8 786.7 False None None False None False 106047.16 0 3443947 122292 None V2P 48S8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 171.2 171.2 786.7 False None None False None False 134683.04 0 3443948 122292 None V2P46S8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 234.56 234.56 256.4 False None None False None False 60141.184 0 3443949 122292 None V2P 47S8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 67.4 67.4 36.45 False None None False None False 2456.73 0 3443950 122292 None V2P 48S8.40 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 155.02 155.02 36.45 False None None False None False 5650.479 0 1720004692000 0 None None Buildings CONSTRUCTION OF BLOCK LEVEL PUBLIC HEALTH UNIT AT GH BANTWAL IN DAKSHINA KANNADA DISTRICT.(WATER SUPPLY AND SANITARY WORKS)(SECOND FLOOR) 228835.91 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3443951 122293 None P.No.122 I.No.13.32.3 of Vol.2 of SR 2023-24) Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per directions of Engineer in charge.Concealed work,including cutting chases and making good the walls etc.25 mm Dia m 643.01 643.01 25.0 False None None False None False 16075.25 0 3443952 122293 None P.No.122 I.No.13.32.4 of Vol.2 of SR 2023-24 Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per directions of Engineer in charge.Concealed work,including cutting chases and making good the walls etc. 32 mm Dia m 750.85 750.85 20.0 False None None False None False 15017.0 0 3443953 122293 None P.No.119 I.No.13.12 of Vol.2 of SR 2023-24) Providing and fixing brass bib cock of approved quality :20 mm nominal bore Nos 856.0 856.0 4.0 False None None False None False 3424.0 0 3443954 122293 None P.No.117 I.No.13.4.1 of Vol.2 of SR 2023-24 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore Nos 740.07 740.07 2.0 False None None False None False 1480.14 0 3443955 122293 None P.No.117 I.No.13.4.2 of Vol2 of SR 2023-24 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore Nos 806.12 806.12 1.0 False None None False None False 806.12 0 3443956 122293 None P.No.132 I.No.14.7.2 of Vol.2 of SR 2023-24) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever eequire:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap Each 3452.31 3452.31 4.0 False None None False None False 13809.24 0 3443957 122293 None P.No.132 I.No.14.5.1 of Vol.2 of SR 2023-24) Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern Each 11649.69 11649.69 2.0 False None None False None False 23299.38 0 3443958 122293 None P.No.132 I.No.14.7.3 of Vol.2 of SR 2023-24) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Each 3863.46 3863.46 4.0 False None None False None False 15453.84 0 3443959 122293 None P.No.133 I.No.14.9.1 of Vol.2 of SR 2023-24) Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm Each 4018.48 4018.48 1.0 False None None False None False 4018.48 0 3443960 122293 None P.No.136 I.No.14.27.2 of Vol.2 of SR 2023-24) Providing and fixing white vitreous china laboratory sink including making all connections including cost of fittings Size 600x450x200 mm Each 4479.51 4479.51 5.0 False None None False None False 22397.55 0 3443961 122293 None P.No.136 I.No.14.28.2.2 of Vol.2 of SR 2023-24 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:Semi rigid pipe:40mm dia Each 124.02 124.02 7.0 False None None False None False 868.14 0 3443962 122293 None P.No.137 I.No.14.40.2 of Vol.2 of SR 2023-24) Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g Each 668.62 668.62 7.0 False None None False None False 4680.34 0 3443963 122293 None P.No.136 I.No.14.32.2 of Vol.2 of SR 2023-24) Providing and fixing 453x357mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing . Each 1372.3 1372.3 4.0 False None None False None False 5489.2 0 3443964 122293 None P.No.131 I.No.14.3.1 of Vol.2 of SR 2023-24) Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 8057.19 8057.19 4.0 False None None False None False 32228.76 0 3443965 122293 None VOL2I.NO:13.42P124 Providing and fixing trap of self ceansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors:*100mm inlet and 100mm outlet.* Sand cast iron S&S as per IS:1729. Each 1543.5 1543.5 4.0 False None None False None False 6174.0 0 3443966 122293 None VOL2I.NO:13.48P125 Providing and fixingon wall face unplasticised Rigid PVC rain water pipes confirming to IS:13592 Type A,including jointing with seal ring confirming to IS:5382,leaving 10mm gap for the thermal expansion,(i) Single socketed pipes 100mm diameter Rmtr 392.28 392.28 40.0 False None None False None False 15691.2 0 3443967 122293 None VOL2I.NO:13.36P123 Cutting holes upto 30X30cm in walls including making good the same with common burnt clay F.P.S (non modular) bricks. Each 435.41 435.41 8.0 False None None False None False 3483.28 0 3443968 122293 None VOL2I.NO:13.37P123 Cutting holes upto 15X15cm in RCC floors and roofs for passing drain pipe etc.,and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size)including finishing complete so as to make it leak proof. Each 421.93 421.93 8.0 False None None False None False 3375.44 0 3443969 122293 None Page no.120, item no.13.22.2 of Vol 2 SR2023-24 Providing and fixing PTMT grating of approved quality and colour, Rectangular type with openable circular lid Each 272.3 272.3 7.0 False None None False None False 1906.1 0 3443970 122293 None Page no.120, item no.13.23.1 of Vol 2 SR Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball 15 mm nominal bore, 105 mm long, weighing not less than 138 g No 276.35 276.35 1.0 False None None False None False 276.35 0 3443971 122293 None Page no.119, item no.13.15 of Vol 2 SR2023-24 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 No 977.32 977.32 1.0 False None None False None False 977.32 0 3443972 122293 None Page no.119, item no.13.16 of Vol 2 SR2023-24 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Nos 835.78 835.78 8.0 False None None False None False 6686.24 0 3443973 122293 None VOL2I.NO:13.34P123 Providing and placing on terrace(at all floor levels), polyethylene water storage tank,IS:120701 marked,with cover and suitable locking arrangements, and making necessary holes for inlet, outlet and over flow pipes, but without fittings and the base support for tank Ltr 12.13 12.13 2000.0 False None None False None False 24260.0 0 3443974 122293 None VOL2 I.NO:13.39 P124 Providing and fixing square mouth S.W.gully trap class SP-1 complete with C.I.grating,brick masonry camber 150X 100 mm size P type with non modular bcommon burnt clay bricks of designation 3.5 & with water tight.C.I cover with frame of 300X300 mm size (inside)the weight of the cover to be not less than 4.50kg and frame to be not less than 2.70kg as per standard design Each 3479.27 3479.27 2.0 False None None False None False 6958.54 0 1720004692000 0 None None Buildings CONSTRUCTION OF BLOCK LEVEL PUBLIC HEALTH UNIT AT GH BANTWAL IN DAKSHINA KANNADA DISTRICT- (ELECTRIFICATION WORKS ) 380760.26 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3443975 122294 None V6S2.2.1 POINT WIRING USING COPPER WIRE WITHOUT SWITCH. Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet.Short point upto 3 mts from tapping point to out let via switch Point 355.51 355.51 22.0 False None None False None False 7821.22 0 3443976 122294 None V6S2.2.2 POINT WIRING USING COPPER WIRE WITHOUT SWITCH.Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet.Medium point above 3 mts upto 6mts from tapping point to outlet via switch Point 500.89 500.89 16.0 False None None False None False 8014.24 0 3443977 122294 None V6S2.2.3 POINT WIRING USING COPPER WIRE WITHOUT SWITCH.Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet.Long point above 6 mts upto 10 mts from tapping point to outlet via switch Point 733.49 733.49 15.0 False None None False None False 11002.35 0 3443978 122294 None V6S3.4.2 Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 3 way Each 210.13 210.13 13.0 False None None False None False 2731.69 0 3443979 122294 None V6S3.4.3 Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 4 - 5 way Each 233.92 233.92 12.0 False None None False None False 2807.04 0 3443980 122294 None V6S3.4.4 Supplying and flush mounting powder coated, Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone cc wall. 6 way , Each 290.75 290.75 6.0 False None None False None False 1744.5 0 3443981 122294 None V6S3.4.5 Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 8 way Each 344.94 344.94 19.0 False None None False None False 6553.86 0 3443982 122294 None V6 S3.4.7 Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 16 way Each 479.74 479.74 7.0 False None None False None False 3358.18 0 3443983 122294 None V6 S3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box. 3 module Each 212.78 212.78 13.0 False None None False None False 2766.14 0 3443984 122294 None V6 S3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box. 4 module Each 231.28 231.28 12.0 False None None False None False 2775.36 0 3443985 122294 None V6 S3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box. 6 module Each 309.25 309.25 6.0 False None None False None False 1855.5 0 3443986 122294 None V6 S3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box. 8 module Each 375.33 375.33 19.0 False None None False None False 7131.27 0 3443987 122294 None V6 S3.5.7 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box. 16 module Each 524.68 524.68 7.0 False None None False None False 3672.76 0 3443988 122294 None V6 S3.6.1 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6 amps one way switch Each 134.8 134.8 84.0 False None None False None False 11323.2 0 3443989 122294 None V6 S3.6.3 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6 Amps 3 way sockets Each 225.99 225.99 16.0 False None None False None False 3615.84 0 3443990 122294 None V6 S3.6.4 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. stepped fan Regulator's Each 471.81 471.81 12.0 False None None False None False 5661.72 0 3443991 122294 None V6 S3.6.7 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16 amps one way switch Each 237.89 237.89 34.0 False None None False None False 8088.26 0 3443992 122294 None V6 S3.6.10 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps universal sockets Each 311.9 311.9 34.0 False None None False None False 10604.6 0 3443993 122294 None V6 S3.6.9 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch Each 430.84 430.84 3.0 False None None False None False 1292.52 0 3443994 122294 None V6 S1.13 Supply and fixing one metal Fan box with round hook Each 154.63 154.63 12.0 False None None False None False 1855.56 0 3443995 122294 None V6 S1.2.1 Concealed Conduit System Supplying heavy gauge PVC conduit pipe . mm dia.mm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary.19/20 mm dia 2 mm thick m 87.23 87.23 130.0 False None None False None False 11339.9 0 3443996 122294 None V6 S1.3.1 Supplying heavy gauge PVC Conduit Pipe . dia . mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary. 19/20 mm dia 2mm thick m 89.87 89.87 230.0 False None None False None False 20670.1 0 3443997 122294 None V6 S1.3.2 Supplying heavy gauge PVC Conduit Pipe . dia . mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary.25 mm dia m 104.41 104.41 200.0 False None None False None False 20882.0 0 3443998 122294 None V6 S2.3.2 WIRING FOR Lighting/Power Circuits. Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 1.5 Sq.mm m 34.36 34.36 550.0 False None None False None False 18898.0 0 3443999 122294 None V6 S2.3.3 WIRING FOR Lighting/Power Circuits Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments.2,5 sq.mm m 55.51 55.51 350.0 False None None False None False 19428.5 0 3444000 122294 None V6 S2.3.4 WIRING FOR Lighting/Power Circuits.Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments.4 sq.mm m 83.26 83.26 100.0 False None None False None False 8326.0 0 3444001 122294 None V6 S2.3.5 WIRING FOR Lighting/Power Circuits. Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments.6sq.mm m 121.59 121.59 50.0 False None None False None False 6079.5 0 3444002 122294 None V6 S2.3.6 WIRING FOR Lighting/Power Circuits. Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments.10 sq.mm m 220.71 220.71 50.0 False None None False None False 11035.5 0 3444003 122294 None V6 S5.19.9 Control System MCB DB. Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single/ DOUBLE door with powder coated painting. Made out of 14SWG MS enclouser.12 Way SP & N Each 3078.01 3078.01 2.0 False None None False None False 6156.02 0 3444004 122294 None V6 S5.18.1 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898.6-32 Amps SP Each 548.46 548.46 18.0 False None None False None False 9872.28 0 3444005 122294 None V6 S5.18.4 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898.6-32 A DP Each 976.66 976.66 6.0 False None None False None False 5859.96 0 3444006 122294 None V6 S5.20.1 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.16A-25A 2 pole Each 5652.48 5652.48 2.0 False None None False None False 11304.96 0 3444007 122294 None V6 S32.08 V-6 CABLES. "1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975" 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) Km 237681.83 237681.83 0.1 False None None False None False 23768.183 0 3444008 122294 None V6 S21.05 V-6 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers asdirected by the departmental staff Km 27602.94 27602.94 0.1 False None None False None False 2760.294 0 3444009 122294 None 11.1.4 ( V-5) Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete Light Duty GI pipe of 32mm dia. m 441.41 441.41 7.0 False None None False None False 3089.87 0 3444010 122294 None V6 S12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should befilled with equal proportion of salt and charcoal 150 mm all-round thepipe to complete depth. The connection from the pipe to the conduitetc., is to be established through GI wire of size as per lSI specification.7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nutsetc., the pipe shall have 16 through holes of 12 mm dia No 4638.82 4638.82 2.0 False None None False None False 9277.64 0 3444011 122294 None V6 S12.58.2 GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 3 mm GI strip m 108.37 108.37 18.0 False None None False None False 1950.66 0 3444012 122294 None V6 S8.1 Supplying and drawing UTP-CAT 6E LAN cable m 50.22 50.22 45.0 False None None False None False 2259.9 0 3444013 122294 None V6 S5.42.2 L.T.PANEL. Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete. 16SWG Sq CM 0.57 0.57 42000.0 False None None False None False 23940.0 0 3444014 122294 None V6 S5.40.1 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolici FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips m 3257.74 3257.74 3.0 False None None False None False 9773.22 0 3444015 122294 None V6 S5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 40x40x6mm m 403.09 403.09 3.0 False None None False None False 1209.27 0 3444016 122294 None V6 S5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs). FOUR POLE 100Amps 25kA Each 11216.42 11216.42 1.0 False None None False None False 11216.42 0 3444017 122294 None V6 S5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63Amps TPN Each 4081.1 4081.1 5.0 False None None False None False 20405.5 0 3444018 122294 None V6 S5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 12310.7 12310.7 1.0 False None None False None False 12310.7 0 3444019 122294 None V6 S5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C Each 680.62 680.62 3.0 False None None False None False 2041.86 0 3444020 122294 None V6 S5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound Each 742.74 742.74 3.0 False None None False None False 2228.22 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1720004695000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1720004695000 1 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory None 1720004695000 1 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end. None 1720004695000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1720004695000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1720004913000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1720004952000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. None 1720004979000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner None 1720004990000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time None 1720005003000 0 None None ELIGIBILITY Materials like, steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested positive by the quality control authority before use on the work None 1720005016000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected None 1720005110000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender None 1720005126000 0 None None ELIGIBILITY All the formats prescribed in the bid documents shall be filled in complete manner. (Section 2 & 3 of the bid document) and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1720005142000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid None 1720005156000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within a weeks time from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as non responsive None 1720005178000 0 None None ELIGIBILITY Additional Clause: In the case of the death of a contractor after executing the agreement / commencement of the work, his legal heir, if an eligible registered contractor and willing, can execute and complete the work at the accepted tender rates irrespective of the cost of the work None 1720005194000 0 None None ELIGIBILITY The contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation None 1720005205000 0 None None ELIGIBILITY GST registration certificate should be enclosed None 1720005244000 0 None None ELIGIBILITY The rates quoted shall be inclusive of GST. None 1720005249000 0 None None ELIGIBILITY The eligible tenderers belonging to Schedule Tribe should upload Schedule Tribe certificate issued by Tahasildar /competent authority and the certificate should be duly attested by Gazetted Officer None 1720246139000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been Satisfactorily completed at least any construction work of value not less than Rs. 12.29 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d) To qualify for award of this contract The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works in the last five years i.e (2019-20 to 2023-24) totaling Rs. 1.90 Lakhs in any one year Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d). The letter of willingness of the sub contractor to be engaged for electrical works should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works in the last five years i.e (2019-20 to 2023-24)totaling Rs. 1.14 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e). The letter of willingness of the sub contractor to be engaged for water Supply works should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2(a): To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been achieved in at least One financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs. 49.17 Lakhs. Note : a) For Clause 3.2 (a) the certificate duly certified by the charted accountant is to be submitted. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate in the last five years 2019-20 to 2023-24 issued by charted accountant True Technical Bid GST Registration Certificate True Technical Bid KPWD Class-III and above Registration Certificate. True Technical Bid Work done certificate to be uploaded, which has to be issued not below the rank of Executive Engineer True Technical Bid The eligible tenderers belonging to Schedule Tribe should upload Schedule Tribe certificate issued by Tahasildar /competent authority and the certificate should be duly attested by Gazetted Officer True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None