createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1721637257817 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 4850.00 emd 290000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 07-08-2024 16:30:00 tenderQueryClose 30-07-2024 13:00:00 technicalBidOpen 09-08-2024 11:00:00 publishedDate 22-07-2024 16:30:08 publishedByPost DUDC_EE_BGK publishedByUser KPE11895 - B Y SURKOD bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 30-07-2024 13:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson S S HERALGAI AEE DUDC BAGALKOTE splitEmdRequiredYn None emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9243711999 tenderSupplierList None
tenderSchedule	createdTs 1721637257860 version 4 createdDate None modifiedDate None tenderNumber DMA/2024-25/OW/WORK_INDENT16213 title CONSTRUCTION OF DHOBI GHATS ROW PLANTS, COMPOUND WALLS ,CC ROADS,AND ANGANVADI AND TOILETS BUILDING AT RABKAVI BANAHATTI CMC description CONSTRUCTION OF DHOBI GHATS ROW PLANTS, COMPOUND WALLS ,CC ROADS,AND ANGANVADI AND TOILETS BUILDING AT RABKAVI BANAHATTI CMC category WORKS categoryText Works ecv 19365000.00 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2173 locationName DMA District Urban Development Cell Bagalkote provisionalAmount 19365000.0 groupOverheadTotal 2976338.26 fileNumber DMA/2023-24/RB/PHASE-4
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1721637258000 1 None None Other Works 5 percentage works DRILLING BOREWELL,INSTALING MOTOR &CONSTRUCTED CISTERN NEAR ERAPPA BUDNI HOUSE WARD NO. 27 IN RABAKAVI-BANAHATTI CMC LIMITS 296366.74 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3577323 130076 None code01 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or each 5141 COMMON SCHEDULE OF RATES 152 2023-24 NO SOR CODE DESCRIPTIONS UNIT RATE Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. No 5446.64 5446.64 1.0 False None None False None False 5446.64 0 3577324 130076 None code02 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 0 to 50MTR Rmtr 381.1 381.1 50.0 False None None False None False 19055.0 0 3577325 130076 None code03 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 50 to 100MTR Rmtr 477.92 477.92 50.0 False None None False None False 23896.0 0 3577326 130076 None code04 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 100 to 150MTR Rmtr 507.79 507.79 50.0 False None None False None False 25389.5 0 3577327 130076 None code05 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. Rmtr 1990.99 1990.99 12.0 False None None False None False 23891.88 0 3577328 130076 None code06 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (PartII) 1982 with all amendments No 154.5 154.5 3.0 False None None False None False 463.5 0 3577329 130076 None code07 Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge each 164 No 168.92 168.92 1.0 False None None False None False 168.92 0 3577330 130076 None code08 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3.00 HP - 155 LPM @ 42 m = 3 STG Outlet Dia - 2.00” No 25064.02 25064.02 1.0 False None None False None False 25064.02 0 3577331 130076 None code09 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694 1990with ISI Mark and as per its latest amendments. Mtr 190.55 190.55 140.0 False None None False None False 26677.0 0 3577332 130076 None code10 Supply and delivery at site of brand new best make non-return valve as 50MM Each 1287.5 1287.5 1.0 False None None False None False 1287.5 0 3577333 130076 None code11 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e 90MM DAI No 9836.5 9836.5 1.0 False None None False None False 9836.5 0 3577334 130076 None code12 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveyingto work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 Rmtr 483.07 483.07 140.0 False None None False None False 67629.8 0 3577335 130076 None code13 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. Rmtr 41.2 41.2 140.0 False None None False None False 5768.0 0 3577336 130076 None code14 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 6695.0 6695.0 1.0 False None None False None False 6695.0 0 3577337 130076 None code15 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. Rmtr 200.85 200.85 15.0 False None None False None False 3012.75 0 3577338 130076 None code16 Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. No 3862.5 3862.5 1.0 False None None False None False 3862.5 0 3577339 130076 None code17 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in aradius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 249.26 249.26 2.2125 False None None False None False 551.48775 0 3577340 130076 None code18 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Cum 6168.67 6168.67 1.9049 False None None False None False 11750.699483 0 3577341 130076 None code19 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6816.54 6816.54 2.3625 False None None False None False 16104.07575 0 3577342 130076 None code20 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 364.62 364.62 2.7 False None None False None False 984.474 0 3577343 130076 None code21 RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm Each 16893.03 16893.03 1.0 False None None False None False 16893.03 0 3577344 130076 None code22 Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in charge of the work. Job 1938.46 1938.46 1.0 False None None False None False 1938.46 0 1721637258000 1 None None Other Works TSP WORKS CONSTRUCTION OF TOILET NEAR CHANDRAVVA NAYAK HOUSE AT WARD NO 06, RABKAVI BANAHATTI CMC 590424.94 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3577345 130077 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth SR 2023-24 Cum 373.89 373.89 18.6606 False None None False None False 6977.011734 0 3577346 130077 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Item 2.1 Mix 1:3:6( M10) Using 40 mm nominal size graded crushed coarse aggregates SR 2023-24 Cum 6168.67 6168.67 3.8449 False None None False None False 23717.919283 0 3577347 130077 None code03 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.22 488.22 6.7798 False None None False None False 3310.033956 0 3577348 130077 None code04 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5779.33 5779.33 6.804 False None None False None False 39322.56132 0 3577349 130077 None code05 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) SR 2023-24 Cum 6475.61 6475.61 9.7877 False None None False None False 63381.327997 0 3577350 130077 None code06 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Footing @ 3% Cum 194.26 194.26 1.0125 False None None False None False 196.68825 0 3577351 130077 None code07 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Columns @ 70% Cum 4532.92 4532.92 2.4318 False None None False None False 11023.154856 0 3577352 130077 None code08 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 lintel ,Roof beam @ 60% Cum 3885.36 3885.36 2.1088 False None None False None False 8193.447168 0 3577353 130077 None code09 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Slab 50% Cum 3237.8 3237.8 3.725 False None None False None False 12060.805 0 3577354 130077 None code10 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SR 2023-24 Tonne 92140.71 92140.71 1.0766 False None None False None False 99198.688386 0 3577355 130077 None code11 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8217.34 8217.34 13.0768 False None None False None False 107456.511712 0 3577356 130077 None code12 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1005.28 1005.28 14.259 False None None False None False 14334.28752 0 3577357 130077 None code13 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specificationsand as per directions of Engineer-in-charge.DSR 2023-24 Sqm 262.65 262.65 92.795 False None None False None False 24372.60675 0 3577358 130077 None code14 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge DSR 2023-24 Sqm 382.13 382.13 59.85 False None None False None False 22870.4805 0 3577359 130077 None code15 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm DSR 2023-24 Sqm 1114.46 1114.46 11.1232 False None None False None False 12396.361472 0 3577360 130077 None code16 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. DSR 2023-24 Sqm 1433.76 1433.76 8.082 False None None False None False 11587.64832 0 3577361 130077 None code17 Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150mm long bracketsof 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to thewall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Sqm 327.54 327.54 7.875 False None None False None False 2579.3775 0 3577362 130077 None code18 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. Sqm 1635.64 1635.64 7.875 False None None False None False 12880.665 0 3577363 130077 None code19 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. DSR 2023-24 Sqm 111.24 111.24 152.645 False None None False None False 16980.2298 0 3577364 130077 None code20 Providing and fixing white vitreous china water closet squatting pan Orissa pattern W.C. pan of size 580x440 mm DSR 2023-24 Each 2400.93 2400.93 4.0 False None None False None False 9603.72 0 3577365 130077 None code21 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired :W.C. pan with ISI marked black solid plastic seat and lid Each 4980.05 4980.05 1.0 False None None False None False 4980.05 0 3577366 130077 None code22 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15B mm C.P. brass pillar tapsDSR 2023-24 Each 3174.46 3174.46 1.0 False None None False None False 3174.46 0 3577367 130077 None code23 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent\ cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Mtr 957.9 957.9 11.0 False None None False None False 10536.9 0 3577368 130077 None code24 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Nos 304.88 304.88 40.0 False None None False None False 12195.2 0 3577369 130077 None code25 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Nos 5811.26 5811.26 2.0 False None None False None False 11622.52 0 3577370 130077 None code26 KSRB 13-13.34 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and but without fittings and the base support for tank Ltr 9.27 9.27 1000.0 False None None False None False 9270.0 0 3577371 130077 None code27 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with allitting arrangements & all necessary accessories complete Nos 226.6 226.6 2.0 False None None False None False 453.2 0 3577372 130077 None code28 13.2 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Nos 294.58 294.58 5.0 False None None False None False 1472.9 0 3577373 130077 None code29 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. DSR 2023-24 Sqm 8524.28 8524.28 2.52 False None None False None False 21481.1856 0 3577374 130077 None code30 Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall20 mm dia Mtr 66.0 66.0 15.0 False None None False None False 990.0 0 3577375 130077 None code31 Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall25 mm dia Mtr 78.0 78.0 15.0 False None None False None False 1170.0 0 3577376 130077 None code32 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.1.5 Sq.mm Mtr 26.0 26.0 15.0 False None None False None False 390.0 0 3577377 130077 None code33 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.2,5 sq.mm Mtr 42.0 42.0 15.0 False None None False None False 630.0 0 3577378 130077 None code34 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.4 sq.mm Mtr 63.0 63.0 10.0 False None None False None False 630.0 0 3577379 130077 None code35 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletShort point upto 3 mts from tapping point to out let via switch Point 269.0 269.0 2.0 False None None False None False 538.0 0 3577380 130077 None code36 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletMedium point above 3 mts upto 6mts from tapping point to outlet via switch Point 374.0 374.0 2.0 False None None False None False 748.0 0 3577381 130077 None code37 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletLong point above 6 mts upto 10 mts from tapping point to outlet via switch Point 555.0 555.0 2.0 False None None False None False 1110.0 0 3577382 130077 None code38 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall1 - 3 Way Each 159.0 159.0 3.0 False None None False None False 477.0 0 3577383 130077 None code39 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall4 - 5 Way Each 177.0 177.0 2.0 False None None False None False 354.0 0 3577384 130077 None code40 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box3 module Each 161.0 161.0 3.0 False None None False None False 483.0 0 3577385 130077 None code41 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box4 module Each 175.0 175.0 2.0 False None None False None False 350.0 0 3577386 130077 None code42 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 amps one way switch Each 102.0 102.0 6.0 False None None False None False 612.0 0 3577387 130077 None code43 Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories complete. Each 971.0 971.0 2.0 False None None False None False 1942.0 0 3577388 130077 None code44 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898.6-32 Amps SP Each 415.0 415.0 1.0 False None None False None False 415.0 0 3577389 130077 None code45 Supplying&fixingofretrofittypeLEDbulb......WwithOPALacrylicdiffusercomprisingofLEDsourcewithCCT6500degreeK,CRI70%.efficacy80lumenperW,life25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80.TheLEDaredrivenbyHFelectronicdriverintegratedinthesystem,withPF0.95,powerlossshould5%oflampWage.,shortcircuit&opencircuitprotectiontobeintegratedinthecircuit,THDlessthan20%,LifeasperLM79.Theoperatinginputvoltageshouldbebetween130to275V.BISApprovedandTestedbyNABL/CPRIaccreditedlaboratorywith2yearsWarrantyagainstanymanufacturing defect working under standard electrical conditionLED Bulbs 15W Each 326.0 326.0 6.0 False None None False None False 1956.0 0 1721637258000 1 None None Other Works SCP WORKS CONSTRUCTION OF TOILETS AND PIPE LINE WORKS AT RABKAVI BANHATTI CMC 3008751.99 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3577390 130078 None code01 Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. Cutting in Cement Concrete Road Surface Cum 1191.71 1191.71 26.8312 False None None False None False 31975.009352 0 3577391 130078 None code02 Earth work excavatoin for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm whevere necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means. Ordinary / Hard Soil - (Depth upto 3m) Cum 269.86 269.86 160.9875 False None None False None False 43444.08675 0 3577392 130078 None code03 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 110mm dia., 6 kg/sqcm & class 3 m Mtr 423.33 423.33 397.5 False None None False None False 168273.675 0 3577393 130078 None code04 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 164.8 164.8 107.325 False None None False None False 17687.16 0 3577394 130078 None code05 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification includingpremixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Cum 2635.77 2635.77 26.8312 False None None False None False 70720.872024 0 3577395 130078 None code06 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. (2nd Quarter Revision of Rates for cement related items M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates Cum 6565.22 6565.22 26.8312 False None None False None False 176152.730864 0 3577396 130078 None code07 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth SR 2023-24 Cum 373.89 373.89 78.5305 False None None False None False 29361.768645 0 3577397 130078 None code08 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Item 2.1 Mix 1:3:6( M10) Using 40 mm nominal size graded crushed coarse aggregates SR 2023-24 Cum 6168.67 6168.67 24.5438 False None None False None False 151402.602746 0 3577398 130078 None code09 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5779.33 5779.33 23.9688 False None None False None False 138523.604904 0 3577399 130078 None code10 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.22 488.22 59.7729 False None None False None False 29182.325238 0 3577400 130078 None code11 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) SR 2023-24 Cum 6475.61 6475.61 44.2398 False None None False None False 286479.691278 0 3577401 130078 None code12 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Footing @ 3% Cum 194.26 194.26 2.7 False None None False None False 524.502 0 3577402 130078 None code13 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Columns @ 70% Cum 4532.92 4532.92 5.0784 False None None False None False 23019.980928 0 3577403 130078 None code14 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 lintel ,Roof beam @ 60% Cum 3885.36 3885.36 34.0192 False None None False None False 132176.838912 0 3577404 130078 None code15 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Slab 50% Cum 3237.8 3237.8 2.1 False None None False None False 6799.38 0 3577405 130078 None code16 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SR 2023-24 Tonne 92140.71 92140.71 4.9023 False None None False None False 451701.402633 0 3577406 130078 None code17 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8217.34 8217.34 32.6968 False None None False None False 268680.722512 0 3577407 130078 None code18 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1005.28 1005.28 48.027 False None None False None False 48280.58256 0 3577408 130078 None code19 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specificationsand as per directions of Engineer-in-charge.DSR 2023-24 Sqm 262.65 262.65 255.879 False None None False None False 67206.61935 0 3577409 130078 None code20 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge DSR 2023-24 Sqm 382.13 382.13 204.019 False None None False None False 77961.78047 0 3577410 130078 None code21 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm DSR 2023-24 Sqm 1114.46 1114.46 69.7758 False None None False None False 77762.338068 0 3577411 130078 None code22 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. DSR 2023-24 Sqm 1433.76 1433.76 9.9 False None None False None False 14194.224 0 3577412 130078 None code23 Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150mm long bracketsof 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to thewall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Sqm 327.54 327.54 73.125 False None None False None False 23951.3625 0 3577413 130078 None code24 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. Sqm 1635.64 1635.64 23.625 False None None False None False 38641.995 0 3577414 130078 None code25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. DSR 2023-24 Sqm 111.24 111.24 459.899 False None None False None False 51159.16476 0 3577415 130078 None code26 Providing and fixing white vitreous china water closet squatting pan Orissa pattern W.C. pan of size 580x440 mm DSR 2023-24 Each 2400.93 2400.93 12.0 False None None False None False 28811.16 0 3577416 130078 None code27 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired :W.C. pan with ISI marked black solid plastic seat and lid Each 4980.05 4980.05 3.0 False None None False None False 14940.15 0 3577417 130078 None code28 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15B mm C.P. brass pillar tapsDSR 2023-24 Each 3174.46 3174.46 5.0 False None None False None False 15872.3 0 3577418 130078 None code29 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent\ cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Mtr 957.9 957.9 50.0 False None None False None False 47895.0 0 3577419 130078 None code30 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Nos 304.88 304.88 104.0 False None None False None False 31707.52 0 3577420 130078 None code31 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Nos 5811.26 5811.26 10.0 False None None False None False 58112.6 0 3577421 130078 None code32 KSRB 13-13.34 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and but without fittings and the base support for tank Ltr 9.27 9.27 5000.0 False None None False None False 46350.0 0 3577422 130078 None code33 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with allitting arrangements & all necessary accessories complete Nos 226.6 226.6 6.0 False None None False None False 1359.6 0 3577423 130078 None code34 13.2 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Nos 294.58 294.58 21.0 False None None False None False 6186.18 0 3577424 130078 None code35 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. DSR 2023-24 Sqm 8524.28 8524.28 7.56 False None None False None False 64443.5568 0 3577425 130078 None code36 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall20 mm dia Mtr 66.0 66.0 45.0 False None None False None False 2970.0 0 3577426 130078 None code37 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall25 mm dia Mtr 78.0 78.0 45.0 False None None False None False 3510.0 0 3577427 130078 None code38 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.1.5 Sq.mm Mtr 26.0 26.0 45.0 False None None False None False 1170.0 0 3577428 130078 None code39 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.2,5 sq.mm Mtr 42.0 42.0 45.0 False None None False None False 1890.0 0 3577429 130078 None code40 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.4 sq.mm Mtr 63.0 63.0 30.0 False None None False None False 1890.0 0 3577430 130078 None code41 POINT WIRING USING COPPER WIRE WITHOUT SWITCHSupplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletShort point upto 3 mts from tapping point to out let via switch Point 269.0 269.0 6.0 False None None False None False 1614.0 0 3577431 130078 None code42 POINT WIRING USING COPPER WIRE WITHOUT SWITCHSupplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletMedium point above 3 mts upto 6mts from tapping point to outlet via switch Point 374.0 374.0 6.0 False None None False None False 2244.0 0 3577432 130078 None code43 POINT WIRING USING COPPER WIRE WITHOUT SWITCHSupplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletLong point above 6 mts upto 10 mts from tapping point to outlet via switch Point 555.0 555.0 6.0 False None None False None False 3330.0 0 3577433 130078 None code44 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall1 - 3 Way Each 159.0 159.0 9.0 False None None False None False 1431.0 0 3577434 130078 None code45 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall4 - 5 Way Each 177.0 177.0 6.0 False None None False None False 1062.0 0 3577435 130078 None code46 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 3 module Each 161.0 161.0 9.0 False None None False None False 1449.0 0 3577436 130078 None code47 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box4 module Each 175.0 175.0 6.0 False None None False None False 1050.0 0 3577437 130078 None code48 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 amps one way switch Each 102.0 102.0 12.0 False None None False None False 1224.0 0 3577438 130078 None code49 Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories complete. Each 971.0 971.0 4.0 False None None False None False 3884.0 0 3577439 130078 None code50 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898.6-32 Amps SP Each 415.0 415.0 3.0 False None None False None False 1245.0 0 3577440 130078 None code51 Supplying&fixingofretrofittypeLEDbulb......WwithOPALacrylicdiffusercomprisingofLEDsourcewithCCT6500degreeK,CRI70%.efficacy80lumenperW,life25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80.TheLEDaredrivenbyHFelectronicdriverintegratedinthesystem,withPF0.95,powerlossshould5%oflampWage.,shortcircuit&opencircuitprotectiontobeintegratedinthecircuit,THDlessthan20%,LifeasperLM79.Theoperatinginputvoltageshouldbebetween130to275V.BISApprovedandTestedbyNABL/CPRIaccreditedlaboratorywith2yearsWarrantyagainstanymanufacturing defect working under standard electrical conditionLED Bulbs 15W Each 326.0 326.0 16.0 False None None False None False 5216.0 0 3577441 130078 None code52 borewell Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or each 5141 COMMON SCHEDULE OF RATES 152 2023-24 NO SOR CODE DESCRIPTIONS UNIT RATE Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. No 5446.64 5446.64 1.0 False None None False None False 5446.64 0 3577442 130078 None code53 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 0 to 50MTR Rmtr 381.1 381.1 50.0 False None None False None False 19055.0 0 3577443 130078 None code54 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 50 to 100MTR Rmtr 477.92 477.92 50.0 False None None False None False 23896.0 0 3577444 130078 None code55 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 100 to 150MTR Rmtr 507.79 507.79 50.0 False None None False None False 25389.5 0 3577445 130078 None code56 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 150 to 200 Rmtr 589.16 589.16 50.0 False None None False None False 29458.0 0 3577446 130078 None code57 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. Rmtr 1990.99 1990.99 18.0 False None None False None False 35837.82 0 3577447 130078 None code58 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (PartII) 1982 with all amendments No 154.5 154.5 4.0 False None None False None False 618.0 0 3577448 130078 None code59 Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge each 164 No 168.92 168.92 1.0 False None None False None False 168.92 0 3577449 130078 None code60 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3.00 HP - 155 LPM @ 42 m = 3 STG Outlet Dia - 2.00” No 25064.02 25064.02 1.0 False None None False None False 25064.02 0 3577450 130078 None code61 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694 1990with ISI Mark and as per its latest amendments. Mtr 190.55 190.55 180.0 False None None False None False 34299.0 0 3577451 130078 None code62 Supply and delivery at site of brand new best make non-return valve as 50MM Each 1287.5 1287.5 1.0 False None None False None False 1287.5 0 3577452 130078 None code63 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e 90MM DAI No 9836.5 9836.5 1.0 False None None False None False 9836.5 0 3577453 130078 None code64 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations an rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 Rmtr 483.07 483.07 1.0125 False None None False None False 489.108375 0 3577454 130078 None code65 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with Rmtr 41.2 41.2 175.0 False None None False None False 7210.0 0 3577455 130078 None code66 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 6695.0 6695.0 1.0 False None None False None False 6695.0 0 3577456 130078 None code67 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. Rmtr 200.85 200.85 20.0 False None None False None False 4017.0 0 3577457 130078 None code68 Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. Nos 3862.5 3862.5 1.0 False None None False None False 3862.5 0 1721637258000 1 None None Other Works WORKS(7.25 PERCENTAGE) CONSTRUCTION OF GENTS TOILET AT RABKAVI BANHATTI CMC 2369936.11 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3577458 130079 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth SR 2023-24 Cum 373.89 373.89 82.4652 False None None False None False 30832.913628 0 3577459 130079 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Item 2.1 Mix 1:3:6( M10) Using 40 mm nominal size graded crushed coarse aggregates SR 2023-24 Cum 6168.67 6168.67 20.2328 False None None False None False 124809.466376 0 3577460 130079 None code03 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5779.33 5779.33 25.7857 False None None False None False 149024.069581 0 3577461 130079 None code04 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.22 488.22 78.1696 False None None False None False 38163.962112 0 3577462 130079 None code05 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) SR 2023-24 Cum 6475.61 6475.61 34.7349 False None None False None False 224929.665789 0 3577463 130079 None code06 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Footing @ 3% Cum 194.26 194.26 3.0374 False None None False None False 590.045324 0 3577464 130079 None code07 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Columns @ 70% Cum 4532.92 4532.92 5.0301 False None None False None False 22801.040892 0 3577465 130079 None code08 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 lintel ,Roof beam @ 60% Cum 3885.36 3885.36 12.4743 False None None False None False 48467.146248 0 3577466 130079 None code09 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Slab 50% Cum 3237.8 3237.8 14.193 False None None False None False 45954.0954 0 3577467 130079 None code10 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SR 2023-24 Tonne 92140.71 92140.71 3.9752 False None None False None False 366277.750392 0 3577468 130079 None code11 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8217.34 8217.34 34.2792 False None None False None False 281683.841328 0 3577469 130079 None code12 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1005.28 1005.28 61.6769 False None None False None False 62002.554032 0 3577470 130079 None code13 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specificationsand as per directions of Engineer-in-charge.DSR 2023-24 Sqm 262.65 262.65 372.465 False None None False None False 97827.93225 0 3577471 130079 None code14 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge DSR 2023-24 Sqm 382.13 382.13 202.86 False None None False None False 77518.8918 0 3577472 130079 None code15 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm DSR 2023-24 Sqm 1114.46 1114.46 62.004 False None None False None False 69100.97784 0 3577473 130079 None code16 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. DSR 2023-24 Sqm 1433.76 1433.76 11.178 False None None False None False 16026.56928 0 3577474 130079 None code17 Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150mm long bracketsof 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to thewall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Sqm 327.54 327.54 33.075 False None None False None False 10833.3855 0 3577475 130079 None code18 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. Sqm 1635.64 1635.64 33.075 False None None False None False 54098.793 0 3577476 130079 None code19 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. DSR 2023-24 Sqm 111.24 111.24 575.325 False None None False None False 63999.153 0 3577477 130079 None code20 Providing and fixing white vitreous china water closet squatting pan Orissa pattern W.C. pan of size 580x440 mm DSR 2023-24 Each 2400.93 2400.93 18.0 False None None False None False 43216.74 0 3577478 130079 None code21 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired :W.C. pan with ISI marked black solid plastic seat and lid Each 4980.05 4980.05 3.0 False None None False None False 14940.15 0 3577479 130079 None code22 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15B mm C.P. brass pillar tapsDSR 2023-24 Each 3174.46 3174.46 3.0 False None None False None False 9523.38 0 3577480 130079 None code23 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent\ cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Mtr 957.9 957.9 56.0 False None None False None False 53642.4 0 3577481 130079 None code24 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Nos 304.88 304.88 140.0 False None None False None False 42683.2 0 3577482 130079 None code25 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Nos 5811.26 5811.26 6.0 False None None False None False 34867.56 0 3577483 130079 None code26 KSRB 13-13.34 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and but without fittings and the base support for tank Ltr 9.27 9.27 4000.0 False None None False None False 37080.0 0 3577484 130079 None code27 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with allitting arrangements & all necessary accessories complete Nos 226.6 226.6 6.0 False None None False None False 1359.6 0 3577485 130079 None code28 13.2 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Nos 294.58 294.58 27.0 False None None False None False 7953.66 0 3577486 130079 None code29 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. DSR 2023-24 Sqm 8524.28 8524.28 7.56 False None None False None False 64443.5568 0 3577487 130079 None code30 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge Sqm 824.0 824.0 240.0 False None None False None False 197760.0 0 3577488 130079 None code31 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 6458.1 6458.1 6.0 False None None False None False 38748.6 0 3577489 130079 None code32 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall20 mm dia Mtr 66.0 66.0 45.0 False None None False None False 2970.0 0 3577490 130079 None code33 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall25 mm dia Mtr 78.0 78.0 30.0 False None None False None False 2340.0 0 3577491 130079 None code34 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.1.5 Sq.mm Mtr 26.0 26.0 45.0 False None None False None False 1170.0 0 3577492 130079 None code35 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.2,5 sq.mm Mtr 42.0 42.0 30.0 False None None False None False 1260.0 0 3577493 130079 None code36 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.4 sq.mm Mtr 63.0 63.0 24.0 False None None False None False 1512.0 0 3577494 130079 None code37 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletShort point upto 3 mts from tapping point to out let via switch Point 269.0 269.0 6.0 False None None False None False 1614.0 0 3577495 130079 None code38 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletMedium point above 3 mts upto 6mts from tapping point to outlet via switch Point 374.0 374.0 6.0 False None None False None False 2244.0 0 3577496 130079 None code39 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletLong point above 6 mts upto 10 mts from tapping point to outlet via switch Point 555.0 555.0 6.0 False None None False None False 3330.0 0 3577497 130079 None code40 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall1 - 3 Way Each 159.0 159.0 9.0 False None None False None False 1431.0 0 3577498 130079 None code41 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall4 - 5 Way Each 177.0 177.0 6.0 False None None False None False 1062.0 0 3577499 130079 None code42 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box3 module Each 161.0 161.0 9.0 False None None False None False 1449.0 0 3577500 130079 None code43 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box4 module Each 175.0 175.0 6.0 False None None False None False 1050.0 0 3577501 130079 None code44 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 amps one way switch Each 102.0 102.0 24.0 False None None False None False 2448.0 0 3577502 130079 None code45 Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories complete. Each 971.0 971.0 6.0 False None None False None False 5826.0 0 3577503 130079 None code46 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898.6-32 Amps SP Each 415.0 415.0 3.0 False None None False None False 1245.0 0 3577504 130079 None code47 Supplying&fixingofretrofittypeLEDbulb......WwithOPALacrylicdiffusercomprisingofLEDsourcewithCCT6500degreeK,CRI70%.efficacy80lumenperW,life25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80.TheLEDaredrivenbyHFelectronicdriverintegratedinthesystem,withPF0.95,powerlossshould5%oflampWage.,shortcircuit&opencircuitprotectiontobeintegratedinthecircuit,THDlessthan20%,LifeasperLM79.Theoperatinginputvoltageshouldbebetween130to275V.BISApprovedandTestedbyNABL/CPRIaccreditedlaboratorywith2yearsWarrantyagainstanymanufacturing defect working under standard electrical conditionLED Bulbs 15W Each 326.0 326.0 24.0 False None None False None False 7824.0 0 1721637258000 1 None None Other Works GENERAL WORKS CONSTRUCTION OF DHOBI GHATS ROW PLANTS, COMPOND WALLS ,CC ROADS,AND ANGANVADI AND TOILETS BUILDING AT RABKAVI BANAHATTI CMC 10123181.96 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3577505 130080 None code01 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.In cement mortar Cum 1031.03 1031.03 21.6 False None None False None False 22270.248 0 3577506 130080 None code02 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge Cum 1734.52 1734.52 8.25 False None None False None False 14309.79 0 3577507 130080 None code03 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 496.46 496.46 40.4352 False None None False None False 20074.459392 0 3577508 130080 None code04 Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin- charge Cum 815.76 815.76 17.01 False None None False None False 13876.0776 0 3577509 130080 None code05 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth SR 2023-24 Cum 373.89 373.89 413.176 False None None False None False 154482.37464 0 3577510 130080 None code06 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Item 2.1 Mix 1:3:6( M10) Using 40 mm nominal size graded crushed coarse aggregates SR 2023-24 Cum 6168.67 6168.67 129.554 False None None False None False 799175.87318 0 3577511 130080 None code07 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5779.33 5779.33 32.3784 False None None False None False 187125.458472 0 3577512 130080 None code08 Providing Coursed rubble masonry (first sort) with hard stone infoundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6816.54 6816.54 84.1833 False None None False None False 573838.831782 0 3577513 130080 None code09 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Cum 507.79 507.79 1951.95 False None None False None False 991180.6905 0 3577514 130080 None code10 Loosening, leveling and Compacting original ground supportingembankment to facilitate placement of first layer of embankment,scarified to a depth of 150 mm, mixed with water at OMC andthen compacted by rolling so as to achieve minimum dry densityas given in Table 300-2 for embankment construction. Cum 108.15 108.15 67.8 False None None False None False 7332.57 0 3577515 130080 None code11 Construction of dry lean cement concrete Sub- base over aprepared sub-grade with coarse and fine aggregate conformingto IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement ratio not to exceed 15:1, aggregate gradationafter blending to be as per table 600-1, cement content not to beless than 150 kg/ m3, optimum moisture content to be determinedduring trial length construction, concrete strength not to be lessthan 10 Mpa at 7 days, mixed in a batching plant, transportedto site, laid with a paver with electronic sensor, compacting with8-10 t vibratory roller, finishing and curing Construction of dry lean cement concrete Cum 5067.6 5067.6 32.0 False None None False None False 162163.2 0 3577516 130080 None code12 Providing and constructing un-reinforced plain cementconcrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges, steel plates including levelling the formwork asper drawing), spreading the concrete with shovels, rakes,compacted using needle, screed and plate vibrators andfinished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts,loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per thedirections of the Engineer-in-charge of the work. Cum 6956.62 6956.62 45.0 False None None False None False 313047.9 0 3577517 130080 None code13 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.22 488.22 150.429 False None None False None False 73442.44638 0 3577518 130080 None code14 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) SR 2023-24 Cum 6475.61 6475.61 208.474 False None None False None False 1349996.31914 0 3577519 130080 None code15 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24Footing @ 3% Cum 194.26 194.26 10.889 False None None False None False 2115.29714 0 3577520 130080 None code16 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24Columns @ 70% Cum 4532.92 4532.92 13.869 False None None False None False 62867.06748 0 3577521 130080 None code17 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24lintel ,Roof beam @ 60% Cum 3885.36 3885.36 67.3622 False None None False None False 261726.397392 0 3577522 130080 None code18 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24Slab 50% Cum 3237.8 3237.8 6.625 False None None False None False 21450.425 0 3577523 130080 None code19 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SR 2023-24 Tonne 92140.71 92140.71 10.708 False None None False None False 986642.72268 0 3577524 130080 None code20 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8217.34 8217.34 121.7965 False None None False None False 1000843.25131 0 3577525 130080 None code21 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. DSR 2023-24 Cum 8457.33 8457.33 4.536 False None None False None False 38362.44888 0 3577526 130080 None code22 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1005.28 1005.28 82.983 False None None False None False 83421.15024 0 3577527 130080 None code23 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specificationsand as per directions of Engineer-in-charge.DSR 2023-24 Sqm 262.65 262.65 787.962 False None None False None False 206958.2193 0 3577528 130080 None code24 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge DSR 2023-24 Sqm 382.13 382.13 971.5816 False None None False None False 371270.476808 0 3577529 130080 None code25 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials,labour, curing, polishing complete as per specifications. Sqm 382.13 382.13 71.9315 False None None False None False 27487.184095 0 3577530 130080 None code26 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm DSR 2023-24 Sqm 1114.46 1114.46 113.82 False None None False None False 126847.8372 0 3577531 130080 None code27 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. DSR 2023-24 Sqm 1433.76 1433.76 118.884 False None None False None False 170451.12384 0 3577532 130080 None code28 Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150mm long bracketsof 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to thewall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Sqm 327.54 327.54 188.1 False None None False None False 61610.274 0 3577533 130080 None code29 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. Sqm 1635.64 1635.64 51.975 False None None False None False 85012.389 0 3577534 130080 None code30 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 101779.45 101779.45 0.12 False None None False None False 12213.534 0 3577535 130080 None code31 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 5914.26 5914.26 3.78 False None None False None False 22355.9028 0 3577536 130080 None code32 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work to give an even shade after thoroughly brooming thesurface to remove all dirt, dust, mortar drops and foreign matter includingpreparing the surface even and sand paper smooth, cost of materials, labourcomplete as per specifications and as per directions of Engineer-in-charge.SR 2023-24 Sqm 82.4 82.4 429.46 False None None False None False 35387.504 0 3577537 130080 None code33 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. DSR 2023-24 Sqm 111.24 111.24 1199.073 False None None False None False 133384.88052 0 3577538 130080 None code34 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 118.45 118.45 28.8 False None None False None False 3411.36 0 3577539 130080 None code35 Providing and laying flooring with burnt stone slabs 10 cms thick, rough chistle dressed on sand bed 7.5 cms to 8 cms thick and pointed with cement mortar 1:3, , including cost of materials, sand, labour, curing complete as per specifications Sqm 2441.1 2441.1 4.5 False None None False None False 10984.95 0 3577540 130080 None code36 Providing and fixing white vitreous china water closet squatting pan Orissa pattern W.C. pan of size 580x440 mm DSR 2023-24 Each 2400.93 2400.93 29.0 False None None False None False 69626.97 0 3577541 130080 None code37 Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings :Flat back wash basin of size 630x450 mmSR 2023-24 Each 1015.58 1015.58 1.0 False None None False None False 1015.58 0 3577542 130080 None code38 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired :W.C. pan with ISI marked black solid plastic seat and lid Each 4980.05 4980.05 4.0 False None None False None False 19920.2 0 3577543 130080 None code39 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15B mm C.P. brass pillar tapsDSR 2023-24 Each 3174.46 3174.46 8.0 False None None False None False 25395.68 0 3577544 130080 None code40 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent\ cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Mtr 957.9 957.9 210.0 False None None False None False 201159.0 0 3577545 130080 None code41 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Mtr 304.88 304.88 275.0 False None None False None False 83842.0 0 3577546 130080 None code42 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 188.49 188.49 450.0 False None None False None False 84820.5 0 3577547 130080 None code43 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Nos 5811.26 5811.26 18.0 False None None False None False 104602.68 0 3577548 130080 None code44 KSRB 13-13.34 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and but without fittings and the base support for tank Ltr 9.27 9.27 8500.0 False None None False None False 78795.0 0 3577549 130080 None code45 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with allitting arrangements & all necessary accessories complete Nos 226.6 226.6 8.0 False None None False None False 1812.8 0 3577550 130080 None code46 13.2 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Nos 294.58 294.58 40.0 False None None False None False 11783.2 0 3577551 130080 None code47 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. DSR 2023-24 Sqm 8524.28 8524.28 13.86 False None None False None False 118146.5208 0 3577552 130080 None code48 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 522.21 522.21 11.5625 False None None False None False 6038.053125 0 3577553 130080 None code49 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall20 mm dia Mtr 66.0 66.0 90.0 False None None False None False 5940.0 0 3577554 130080 None code50 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall25 mm dia Mtr 78.0 78.0 90.0 False None None False None False 7020.0 0 3577555 130080 None code51 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.1.5 Sq.mm Mtr 26.0 26.0 105.0 False None None False None False 2730.0 0 3577556 130080 None code52 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.2,5 sq.mm Mtr 42.0 42.0 75.0 False None None False None False 3150.0 0 3577557 130080 None code53 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.4 sq.mm Mtr 63.0 63.0 30.0 False None None False None False 1890.0 0 3577558 130080 None code54 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletShort point upto 3 mts from tapping point to out let via switch Point 269.0 269.0 14.0 False None None False None False 3766.0 0 3577559 130080 None code55 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletMedium point above 3 mts upto 6mts from tapping point to outlet via switch Point 374.0 374.0 8.0 False None None False None False 2992.0 0 3577560 130080 None code56 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletLong point above 6 mts upto 10 mts from tapping point to outlet via switch Point 555.0 555.0 12.0 False None None False None False 6660.0 0 3577561 130080 None code57 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall1 - 3 Way Each 159.0 159.0 12.0 False None None False None False 1908.0 0 3577562 130080 None code58 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall4 - 5 Way Each 177.0 177.0 8.0 False None None False None False 1416.0 0 3577563 130080 None code59 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box3 module Each 161.0 161.0 12.0 False None None False None False 1932.0 0 3577564 130080 None code60 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box4 module Each 175.0 175.0 8.0 False None None False None False 1400.0 0 3577565 130080 None code61 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 amps one way switch Each 102.0 102.0 16.0 False None None False None False 1632.0 0 3577566 130080 None code62 Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories complete. Each 971.0 971.0 6.0 False None None False None False 5826.0 0 3577567 130080 None code63 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898.6-32 Amps SP Each 415.0 415.0 4.0 False None None False None False 1660.0 0 3577568 130080 None code64 Supplying&fixingofretrofittypeLEDbulb......WwithOPALacrylicdiffusercomprisingofLEDsourcewithCCT6500degreeK,CRI70%.efficacy80lumenperW,life25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80.TheLEDaredrivenbyHFelectronicdriverintegratedinthesystem,withPF0.95,powerlossshould5%oflampWage.,shortcircuit&opencircuitprotectiontobeintegratedinthecircuit,THDlessthan20%,LifeasperLM79.Theoperatinginputvoltageshouldbebetween130to275V.BISApprovedandTestedbyNABL/CPRIaccreditedlaboratorywith2yearsWarrantyagainstanymanufacturing defect working under standard electrical conditionLED Bulbs 15W Each 326.0 326.0 44.0 False None None False None False 14344.0 0 3577569 130080 None code65 RO PLANT Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.Sl. No.1.1, Page No.5 of PWD SR 2021-22 of Volume1. Sqm 93.73 93.73 25.0 False None None False None False 2343.25 0 3577570 130080 None code66 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Sl. No.1.14.1, Page No.8 of PWD SR 2021-22 of Volume1. Cum 105.06 105.06 25.758 False None None False None False 2706.13548 0 3577571 130080 None code67 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sl. No.4.1, Page No.5 of PWD SR 2021-22 of Volume2. Sqm 121.54 121.54 16.0 False None None False None False 1944.64 0 3577572 130080 None code68 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). Sl. No.5.4, Page No.9 of PWD SR 2021-22 of Volume2. Cum 6580.67 6580.67 5.9928 False None None False None False 39436.639176 0 3577573 130080 None code69 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Sl. No.2.1.2, Page No.15 of PWD SR 2021-22 of Volume1. Revised Rate W.E.F From 04-01-2023. Cum 5833.92 5833.92 3.393 False None None False None False 19794.49056 0 3577574 130080 None code70 Providing and laying in position Reinforced cement concrete for allSub structures of building, Irrigation works, Sub structure works ofbridges, Drain works & other parallel works from 0.50m to 3.50 mheight. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with superplasticisers, laid in layers, well compacted using needle vibrators,providing weep holes wherever necesary, including all lead & lifts, costof all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other. appurtenances required to complete the work as per technicalspecifications. (The cost of steel reinforcement & formwork to be paidseparately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Sl. No.2.4.3, Page No.17 of PWD SR 2021-22 of Volume1. Revised Rate W.E.F From 04-01-2023. Cum 6526.08 6526.08 2.7 False None None False None False 17620.416 0 3577575 130080 None code71 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Sl. No.2.5.2, Page No.17 of PWD SR 2021-22 of Volume1. Revised Rate W.E.F From 04-01-2023. Cum 7048.29 7048.29 6.455 False None None False None False 45496.71195 0 3577576 130080 None code72 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Sl. No.1.9, Page No.7 of PWD SR 2021-22 of Volume1. Cum 273.98 273.98 15.1376 False None None False None False 4147.399648 0 3577577 130080 None code73 Appendix I Additionalities for Formwork, Centering & Scaffolding. Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Roads & Bridges depending upon the type of structure. These percentages are worked out based on empirical mathematical approaches & exhaustive studies on the common standard sizes of the type of the structure of Buildings, Irrigation works, Bridges, Water works etc. The use rate of shuttering material is considered at 40 repetitions and type of material to be used is steel centering. Revision to 2021-22 VOL.1 COMMON SR- PAGE : 115 - 116 W.E.F 01.09.2022.Percentage on finished rate of concrete per m3. For Footing. (8%) Sqm 522.08 522.08 2.7 False None None False None False 1409.616 0 3577578 130080 None code74 Appendix I Additionalities for Formwork, Centering & Scaffolding. Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Roads & Bridges depending upon the type of structure. These percentages are worked out based on empirical mathematical approaches & exhaustive studies on the common standard sizes of the type of the structure of Buildings, Irrigation works, Bridges, Water works etc. The use rate of shuttering material is considered at 40 repetitions and type of material to be used is steel centering. Revision to 2021-22 VOL.1 COMMON SR- PAGE : 115 - 116 W.E.F 01.09.2022.Percentage on finished rate of concrete per m3. For Columns. (70%) Sqm 4933.8 4933.8 2.07 False None None False None False 10212.966 0 3577579 130080 None code75 Appendix I Additionalities for Formwork, Centering & Scaffolding. Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Roads & Bridges depending upon the type of structure. These percentages are worked out based on empirical mathematical approaches & exhaustive studies on the common standard sizes of the type of the structure of Buildings, Irrigation works, Bridges, Water works etc. The use rate of shuttering material is considered at 40 repetitions and type of material to be used is steel centering. Revision to 2021-22 VOL.1 COMMON SR- PAGE : 115 - 116 W.E.F 01.09.2022.Percentage on finished rate of concrete per m3. For Lintel Beams and roof beams (60%) Sqm 4228.97 4228.97 0.6265 False None None False None False 2649.449705 0 3577580 130080 None code76 Appendix I Additionalities for Formwork, Centering & Scaffolding. Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Roads & Bridges depending upon the type of structure. These percentages are worked out based on empirical mathematical approaches & exhaustive studies on the common standard sizes of the type of the structure of Buildings, Irrigation works, Bridges, Water works etc. The use rate of shuttering material is considered at 40 repetitions and type of material to be used is steel centering. Revision to 2021-22 VOL.1 COMMON SR- PAGE : 115 - 116 W.E.F 01.09.2022.Percentage on finished rate of concrete per m3. For Roof. (50%) Sqm 3524.14 3524.14 3.2725 False None None False None False 11532.74815 0 3577581 130080 None code77 Appendix I Additionalities for Formwork, Centering & Scaffolding. Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Roads & Bridges depending upon the type of structure. These percentages are worked out based on empirical mathematical approaches & exhaustive studies on the common standard sizes of the type of the structure of Buildings, Irrigation works, Bridges, Water works etc. The use rate of shuttering material is considered at 40 repetitions and type of material to be used is steel centering. Revision to 2021-22 VOL.1 COMMON SR- PAGE : 115 - 116 W.E.F 01.09.2022.Percentage on finished rate of concrete per m3. For Chejja (45%) Sqm 3171.73 3171.73 0.486 False None None False None False 1541.46078 0 3577582 130080 None code78 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Building Tonne 92140.71 92140.71 0.9363 False None None False None False 86271.346773 0 3577583 130080 None code79 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (P. No.13, I. No.6.7, Volume-2,) Revised Rate W.E.F. 04-01-2023 Cum 8457.33 8457.33 4.4022 False None None False None False 37230.858126 0 3577584 130080 None code80 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No.8.1.1. Page No.41 of PWD SR 2021-22 of Volume2.Revised Rate W.E.F. 04-01-2023 Sqm 262.65 262.65 12.5316 False None None False None False 3291.42474 0 3577585 130080 None code81 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No.8.9, Page No.42 of PWD SR 2021-22 of Volume2.Revised Rate W.E.F. 04-01-2023 Sqm 382.13 382.13 66.4 False None None False None False 25373.432 0 3577586 130080 None code82 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No.8.5.1, Page No.42 of PWD SR 2021-22 of Volume2.Revised Rate W.E.F. 04-01-2023 Sqm 376.98 376.98 10.62 False None None False None False 4003.5276 0 3577587 130080 None code83 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm ( Vol -2, I No - 9.22.2 , P No - 63, PWD SR - 2021-22 ) Sqm 1365.78 1365.78 14.411 False None None False None False 19682.25558 0 3577588 130080 None code84 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Sl. No.11.34A, Page No.85 of PWD SR 2021-22 of Volume2.Revised Rate W.E.F. 04-01-2022 Kgs 173.04 173.04 233.1 False None None False None False 40335.624 0 3577589 130080 None code85 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)Sl. No.12.90, Page No.112 of PWD SR 2021-22 of Volume2. Sqm 6936.02 6936.02 11.1 False None None False None False 76989.822 0 3577590 130080 None code86 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 2742.89 2742.89 5.25 False None None False None False 14400.1725 0 3577591 130080 None code87 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl. No.8.40, Page No.48 of PWD SR 2021-22 of Volume2. Sqm 118.45 118.45 16.35 False None None False None False 1936.6575 0 3577592 130080 None code88 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl. No.8.30, Page No.46 of PWD SR 2021-22 of Volume2. Sqm 179.22 179.22 66.4 False None None False None False 11900.208 0 3577593 130080 None code89 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ( Vol -2, I No - 8.33.1 , P No - 46, PWD SR - 2021-22 ) Sqm 162.74 162.74 10.62 False None None False None False 1728.2988 0 3577594 130080 None code90 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary, 19/20 mm dia 2 mm thick Mtr 66.0 66.0 25.0 False None None False None False 1650.0 0 3577595 130080 None code91 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch box. Point 394.0 394.0 1.0 False None None False None False 394.0 0 3577596 130080 None code92 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. PWD Electrical SR 2021-22 Long point above 6m upto 10m from tapping point to out let via switch box Point 570.0 570.0 2.0 False None None False None False 1140.0 0 3577597 130080 None code93 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. PWD Electrical SR 2021-22, Three outlet in a row, above 6m upto 10m from tapping point to out let via switche Point 1035.0 1035.0 2.0 False None None False None False 2070.0 0 3577598 130080 None code94 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694 confirming to latest amendments.PWD Electrical SR 2021-22, 1.5 mm2 Mtr 26.0 26.0 90.0 False None None False None False 2340.0 0 3577599 130080 None code95 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694 confirming to latest amendments.PWD Electrical SR 2021-22, 2.5 mm2 Mtr 42.0 42.0 90.0 False None None False None False 3780.0 0 3577600 130080 None code96 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694 confirming to latest amendments. PWD Electrical SR 2021-22, 4 mm2 Mtr 63.0 63.0 45.0 False None None False None False 2835.0 0 3577601 130080 None code97 Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654, 6A 3/5 Way Each 147.0 147.0 4.0 False None None False None False 588.0 0 3577602 130080 None code98 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch Each 326.0 326.0 4.0 False None None False None False 1304.0 0 3577603 130080 None code99 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket Each 236.0 236.0 8.0 False None None False None False 1888.0 0 3577604 130080 None code100 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, 1-3 Way Each 138.0 138.0 1.0 False None None False None False 138.0 0 3577605 130080 None code101 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, 4-5 Way Each 177.0 177.0 2.0 False None None False None False 354.0 0 3577606 130080 None code102 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall,10-12 way Each 319.0 319.0 2.0 False None None False None False 638.0 0 3577607 130080 None code103 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall,16-18 way Each 405.0 405.0 1.0 False None None False None False 405.0 0 3577608 130080 None code104 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module Each 161.0 161.0 1.0 False None None False None False 161.0 0 3577609 130080 None code105 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.4-5 Module Each 175.0 175.0 2.0 False None None False None False 350.0 0 3577610 130080 None code106 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.10-12 Module Each 344.0 344.0 2.0 False None None False None False 688.0 0 3577611 130080 None code107 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.16-18 Module Each 457.0 457.0 1.0 False None None False None False 457.0 0 3577612 130080 None code108 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned Each 5992.0 5992.0 1.0 False None None False None False 5992.0 0 3577613 130080 None code109 Supplying and Fixing........mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/ tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires. Using 25mm dia G.I.Pipe Each 1203.0 1203.0 1.0 False None None False None False 1203.0 0 3577614 130080 None code110 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. Each 162.0 162.0 1.0 False None None False None False 162.0 0 3577615 130080 None code111 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition, LED square or round down light 10-12W Each 885.0 885.0 1.0 False None None False None False 885.0 0 3577616 130080 None code112 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast /extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 1'x1' 34-22 W Each 3138.0 3138.0 1.0 False None None False None False 3138.0 0 3577617 130080 None code113 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast /extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2'x2' /1'x4' 34-36 W Each 3692.0 3692.0 1.0 False None None False None False 3692.0 0 3577618 130080 None code114 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 9W, 6500K Each 154.0 154.0 1.0 False None None False None False 154.0 0 3577619 130080 None code115 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling /rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders. Each 122.0 122.0 4.0 False None None False None False 488.0 0 3577620 130080 None code116 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Lamp Holder Each 102.0 102.0 4.0 False None None False None False 408.0 0 3577621 130080 None code117 Supplying And Fixing Metal Fan Box with Round Hook. Each 163.0 163.0 2.0 False None None False None False 326.0 0 3577622 130080 None code118 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model Each 2984.0 2984.0 2.0 False None None False None False 5968.0 0 3577623 130080 None code119 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module Each 357.0 357.0 2.0 False None None False None False 714.0 0 3577624 130080 None code120 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 315.0 315.0 2.0 False None None False None False 630.0 0 3577625 130080 None code121 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 12 Way SP & N Each 1863.0 1863.0 1.0 False None None False None False 1863.0 0 3577626 130080 None code122 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 32-40 A 2 pol Each 4277.0 4277.0 1.0 False None None False None False 4277.0 0 3577627 130080 None code123 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.PWD Electrical SR 2021-22, 5-32 DP Each 793.0 793.0 1.0 False None None False None False 793.0 0 3577628 130080 None code124 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. PWD Electrical SR 2021-22, 14SWG Sq CM 0.43 0.43 3600.0 False None None False None False 1548.0 0 3577629 130080 None code125 Supplying .. A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic /FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete, 100 A 4 x 30 x 6 mm Aluminium Strips. Mtr 2465.0 2465.0 1.0 False None None False None False 2465.0 0 3577630 130080 None code126 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm. Mtr 395.0 395.0 3.0 False None None False None False 1185.0 0 3577631 130080 None code127 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 515.0 515.0 3.0 False None None False None False 1545.0 0 3577632 130080 None code128 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 5705.0 5705.0 1.0 False None None False None False 5705.0 0 3577633 130080 None code129 Digging of Pit for providing GI Pipe type Earthing, Hard Soil, Bescom SR 2021-22 No 2990.0 2990.0 1.0 False None None False None False 2990.0 0 3577634 130080 None code130 GI Grounding pipe, B Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg, Bescom SR 2021-22 Each 743.0 743.0 1.0 False None None False None False 743.0 0 3577635 130080 None code131 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each Each 676.0 676.0 1.0 False None None False None False 676.0 0 3577636 130080 None code132 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag.Bescom SR 2021-22 Each 310.0 310.0 1.0 False None None False None False 310.0 0 3577637 130080 None code133 GI Wire 8 SWG Kg 77.85 77.85 3.0 False None None False None False 233.55 0 3577638 130080 None code134 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed.In Hard Soil Cum 389.0 389.0 15.0 False None None False None False 5835.0 0 3577639 130080 None code135 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975,16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) Km 183442.0 183442.0 0.04 False None None False None False 7337.68 0 3577640 130080 None code136 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff, Bescom SR 2021-22, 35 to 95 Sqmm Km 16159.0 16159.0 0.04 False None None False None False 646.36 0 3577641 130080 None code137 GI Pipe B - Class as per IS-1239. GI Pipe - 50 mm Dia Mtr 295.0 295.0 6.0 False None None False None False 1770.0 0 3577642 130080 None code138 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.. 32 amps Each 401.0 401.0 1.0 False None None False None False 401.0 0 3577643 130080 None code139 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Each 725.0 725.0 2.0 False None None False None False 1450.0 0 3577644 130080 None code140 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 :HDPE Grade PE80-PN6.0,110mm dia Mtr 469.0 469.0 6.0 False None None False None False 2814.0 0 3577645 130080 None code141 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 110mm dia., 6 kg/sqcm & class 3 Mtr 411.0 411.0 30.0 False None None False None False 12330.0 0 3577646 130080 None code142 1500 LPH SS Ro Plant 1 Raw water Pump 1HP Wilo/Lubi 12 High Pressure Pump 3 HP (4-16) Lyson 13 Dosing Pump 6 LPH Veritho 14 Pressure Vessel 1465T SS304-Imported 25 Multiport Valve 1" Real mount-TMF 26 Filter Media (Sand) Water wash 1507 Granular Activated Carbon Water wash 758 Flow Meters 2400lph panel mounted 29 SS filter Housing 20" x 3ele SS304 110 Jumbo Filter 2.5" Spun 311 Control Pannel Automatic Panel1:1 Proton 112 Membrane 80-40 Envo 213 Membrane Housing 8080:2E SS304-imported 114 Pressure Gauge 10 kg and 21kg Inline 315 Low/high Pressure Switch Danfor 216 Skid 1" SS 117 Plant Pipe SS304 1 lot18 Assembling 1 Unit 259000.0 259000.0 1.0 False None None False None False 259000.0 0 1721638068000 0 None None Other Works Rabkavi Banahatti cmc nagaraothana phase -4 16388661.74 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3577715 130089 None code01 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or each 5141 COMMON SCHEDULE OF RATES 152 2023-24 NO SOR CODE DESCRIPTIONS UNIT RATE Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. No 5446.64 5446.64 1.0 False None None False None False 5446.64 0 3577737 130089 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth SR 2023-24 Cum 373.89 373.89 18.6606 False None None False None False 6977.011734 0 3577782 130089 None code01 Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. Cutting in Cement Concrete Road Surface Cum 1191.71 1191.71 26.8312 False None None False None False 31975.009352 0 3577850 130089 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth SR 2023-24 Cum 373.89 373.89 82.4652 False None None False None False 30832.913628 0 3577897 130089 None code01 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.In cement mortar Cum 1031.03 1031.03 21.6 False None None False None False 22270.248 0 3577716 130089 None code02 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 0 to 50MTR Rmtr 381.1 381.1 50.0 False None None False None False 19055.0 0 3577738 130089 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Item 2.1 Mix 1:3:6( M10) Using 40 mm nominal size graded crushed coarse aggregates SR 2023-24 Cum 6168.67 6168.67 3.8449 False None None False None False 23717.919283 0 3577783 130089 None code02 Earth work excavatoin for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm whevere necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means. Ordinary / Hard Soil - (Depth upto 3m) Cum 269.86 269.86 160.9875 False None None False None False 43444.08675 0 3577851 130089 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Item 2.1 Mix 1:3:6( M10) Using 40 mm nominal size graded crushed coarse aggregates SR 2023-24 Cum 6168.67 6168.67 20.2328 False None None False None False 124809.466376 0 3577898 130089 None code02 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge Cum 1734.52 1734.52 8.25 False None None False None False 14309.79 0 3577717 130089 None code03 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 50 to 100MTR Rmtr 477.92 477.92 50.0 False None None False None False 23896.0 0 3577739 130089 None code03 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.22 488.22 6.7798 False None None False None False 3310.033956 0 3577784 130089 None code03 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 110mm dia., 6 kg/sqcm & class 3 m Mtr 423.33 423.33 397.5 False None None False None False 168273.675 0 3577852 130089 None code03 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5779.33 5779.33 25.7857 False None None False None False 149024.069581 0 3577899 130089 None code03 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 496.46 496.46 40.4352 False None None False None False 20074.459392 0 3577718 130089 None code04 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 100 to 150MTR Rmtr 507.79 507.79 50.0 False None None False None False 25389.5 0 3577740 130089 None code04 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5779.33 5779.33 6.804 False None None False None False 39322.56132 0 3577785 130089 None code04 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 164.8 164.8 107.325 False None None False None False 17687.16 0 3577853 130089 None code04 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.22 488.22 78.1696 False None None False None False 38163.962112 0 3577900 130089 None code04 Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin- charge Cum 815.76 815.76 17.01 False None None False None False 13876.0776 0 3577719 130089 None code05 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. Rmtr 1990.99 1990.99 12.0 False None None False None False 23891.88 0 3577741 130089 None code05 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) SR 2023-24 Cum 6475.61 6475.61 9.7877 False None None False None False 63381.327997 0 3577786 130089 None code05 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification includingpremixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Cum 2635.77 2635.77 26.8312 False None None False None False 70720.872024 0 3577854 130089 None code05 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) SR 2023-24 Cum 6475.61 6475.61 34.7349 False None None False None False 224929.665789 0 3577901 130089 None code05 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth SR 2023-24 Cum 373.89 373.89 413.176 False None None False None False 154482.37464 0 3577720 130089 None code06 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (PartII) 1982 with all amendments No 154.5 154.5 3.0 False None None False None False 463.5 0 3577742 130089 None code06 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Footing @ 3% Cum 194.26 194.26 1.0125 False None None False None False 196.68825 0 3577787 130089 None code06 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. (2nd Quarter Revision of Rates for cement related items M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates Cum 6565.22 6565.22 26.8312 False None None False None False 176152.730864 0 3577855 130089 None code06 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Footing @ 3% Cum 194.26 194.26 3.0374 False None None False None False 590.045324 0 3577902 130089 None code06 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Item 2.1 Mix 1:3:6( M10) Using 40 mm nominal size graded crushed coarse aggregates SR 2023-24 Cum 6168.67 6168.67 129.554 False None None False None False 799175.87318 0 3577721 130089 None code07 Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge each 164 No 168.92 168.92 1.0 False None None False None False 168.92 0 3577743 130089 None code07 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Columns @ 70% Cum 4532.92 4532.92 2.4318 False None None False None False 11023.154856 0 3577788 130089 None code07 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth SR 2023-24 Cum 373.89 373.89 78.5305 False None None False None False 29361.768645 0 3577856 130089 None code07 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Columns @ 70% Cum 4532.92 4532.92 5.0301 False None None False None False 22801.040892 0 3577903 130089 None code07 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5779.33 5779.33 32.3784 False None None False None False 187125.458472 0 3577722 130089 None code08 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3.00 HP - 155 LPM @ 42 m = 3 STG Outlet Dia - 2.00” No 25064.02 25064.02 1.0 False None None False None False 25064.02 0 3577744 130089 None code08 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 lintel ,Roof beam @ 60% Cum 3885.36 3885.36 2.1088 False None None False None False 8193.447168 0 3577789 130089 None code08 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Item 2.1 Mix 1:3:6( M10) Using 40 mm nominal size graded crushed coarse aggregates SR 2023-24 Cum 6168.67 6168.67 24.5438 False None None False None False 151402.602746 0 3577857 130089 None code08 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 lintel ,Roof beam @ 60% Cum 3885.36 3885.36 12.4743 False None None False None False 48467.146248 0 3577904 130089 None code08 Providing Coursed rubble masonry (first sort) with hard stone infoundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6816.54 6816.54 84.1833 False None None False None False 573838.831782 0 3577723 130089 None code09 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694 1990with ISI Mark and as per its latest amendments. Mtr 190.55 190.55 140.0 False None None False None False 26677.0 0 3577745 130089 None code09 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Slab 50% Cum 3237.8 3237.8 3.725 False None None False None False 12060.805 0 3577790 130089 None code09 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5779.33 5779.33 23.9688 False None None False None False 138523.604904 0 3577858 130089 None code09 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Slab 50% Cum 3237.8 3237.8 14.193 False None None False None False 45954.0954 0 3577905 130089 None code09 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Cum 507.79 507.79 1951.95 False None None False None False 991180.6905 0 3577724 130089 None code10 Supply and delivery at site of brand new best make non-return valve as 50MM Each 1287.5 1287.5 1.0 False None None False None False 1287.5 0 3577746 130089 None code10 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SR 2023-24 Tonne 92140.71 92140.71 1.0766 False None None False None False 99198.688386 0 3577791 130089 None code10 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.22 488.22 59.7729 False None None False None False 29182.325238 0 3577859 130089 None code10 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SR 2023-24 Tonne 92140.71 92140.71 3.9752 False None None False None False 366277.750392 0 3577906 130089 None code10 Loosening, leveling and Compacting original ground supportingembankment to facilitate placement of first layer of embankment,scarified to a depth of 150 mm, mixed with water at OMC andthen compacted by rolling so as to achieve minimum dry densityas given in Table 300-2 for embankment construction. Cum 108.15 108.15 67.8 False None None False None False 7332.57 0 3577725 130089 None code11 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e 90MM DAI No 9836.5 9836.5 1.0 False None None False None False 9836.5 0 3577747 130089 None code11 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8217.34 8217.34 13.0768 False None None False None False 107456.511712 0 3577792 130089 None code11 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) SR 2023-24 Cum 6475.61 6475.61 44.2398 False None None False None False 286479.691278 0 3577860 130089 None code11 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8217.34 8217.34 34.2792 False None None False None False 281683.841328 0 3577907 130089 None code11 Construction of dry lean cement concrete Sub- base over aprepared sub-grade with coarse and fine aggregate conformingto IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement ratio not to exceed 15:1, aggregate gradationafter blending to be as per table 600-1, cement content not to beless than 150 kg/ m3, optimum moisture content to be determinedduring trial length construction, concrete strength not to be lessthan 10 Mpa at 7 days, mixed in a batching plant, transportedto site, laid with a paver with electronic sensor, compacting with8-10 t vibratory roller, finishing and curing Construction of dry lean cement concrete Cum 5067.6 5067.6 32.0 False None None False None False 162163.2 0 3577726 130089 None code12 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveyingto work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 Rmtr 483.07 483.07 140.0 False None None False None False 67629.8 0 3577748 130089 None code12 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1005.28 1005.28 14.259 False None None False None False 14334.28752 0 3577793 130089 None code12 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Footing @ 3% Cum 194.26 194.26 2.7 False None None False None False 524.502 0 3577861 130089 None code12 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1005.28 1005.28 61.6769 False None None False None False 62002.554032 0 3577908 130089 None code12 Providing and constructing un-reinforced plain cementconcrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges, steel plates including levelling the formwork asper drawing), spreading the concrete with shovels, rakes,compacted using needle, screed and plate vibrators andfinished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts,loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per thedirections of the Engineer-in-charge of the work. Cum 6956.62 6956.62 45.0 False None None False None False 313047.9 0 3577727 130089 None code13 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. Rmtr 41.2 41.2 140.0 False None None False None False 5768.0 0 3577749 130089 None code13 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specificationsand as per directions of Engineer-in-charge.DSR 2023-24 Sqm 262.65 262.65 92.795 False None None False None False 24372.60675 0 3577794 130089 None code13 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Columns @ 70% Cum 4532.92 4532.92 5.0784 False None None False None False 23019.980928 0 3577862 130089 None code13 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specificationsand as per directions of Engineer-in-charge.DSR 2023-24 Sqm 262.65 262.65 372.465 False None None False None False 97827.93225 0 3577909 130089 None code13 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.22 488.22 150.429 False None None False None False 73442.44638 0 3577728 130089 None code14 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 6695.0 6695.0 1.0 False None None False None False 6695.0 0 3577750 130089 None code14 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge DSR 2023-24 Sqm 382.13 382.13 59.85 False None None False None False 22870.4805 0 3577795 130089 None code14 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 lintel ,Roof beam @ 60% Cum 3885.36 3885.36 34.0192 False None None False None False 132176.838912 0 3577863 130089 None code14 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge DSR 2023-24 Sqm 382.13 382.13 202.86 False None None False None False 77518.8918 0 3577910 130089 None code14 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) SR 2023-24 Cum 6475.61 6475.61 208.474 False None None False None False 1349996.31914 0 3577729 130089 None code15 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. Rmtr 200.85 200.85 15.0 False None None False None False 3012.75 0 3577751 130089 None code15 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm DSR 2023-24 Sqm 1114.46 1114.46 11.1232 False None None False None False 12396.361472 0 3577796 130089 None code15 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24 Slab 50% Cum 3237.8 3237.8 2.1 False None None False None False 6799.38 0 3577864 130089 None code15 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm DSR 2023-24 Sqm 1114.46 1114.46 62.004 False None None False None False 69100.97784 0 3577911 130089 None code15 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24Footing @ 3% Cum 194.26 194.26 10.889 False None None False None False 2115.29714 0 3577730 130089 None code16 Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. No 3862.5 3862.5 1.0 False None None False None False 3862.5 0 3577752 130089 None code16 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. DSR 2023-24 Sqm 1433.76 1433.76 8.082 False None None False None False 11587.64832 0 3577797 130089 None code16 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SR 2023-24 Tonne 92140.71 92140.71 4.9023 False None None False None False 451701.402633 0 3577865 130089 None code16 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. DSR 2023-24 Sqm 1433.76 1433.76 11.178 False None None False None False 16026.56928 0 3577912 130089 None code16 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24Columns @ 70% Cum 4532.92 4532.92 13.869 False None None False None False 62867.06748 0 3577731 130089 None code17 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in aradius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 249.26 249.26 2.2125 False None None False None False 551.48775 0 3577753 130089 None code17 Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150mm long bracketsof 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to thewall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Sqm 327.54 327.54 7.875 False None None False None False 2579.3775 0 3577798 130089 None code17 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8217.34 8217.34 32.6968 False None None False None False 268680.722512 0 3577866 130089 None code17 Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150mm long bracketsof 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to thewall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Sqm 327.54 327.54 33.075 False None None False None False 10833.3855 0 3577913 130089 None code17 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24lintel ,Roof beam @ 60% Cum 3885.36 3885.36 67.3622 False None None False None False 261726.397392 0 3577732 130089 None code18 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Cum 6168.67 6168.67 1.9049 False None None False None False 11750.699483 0 3577754 130089 None code18 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. Sqm 1635.64 1635.64 7.875 False None None False None False 12880.665 0 3577799 130089 None code18 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1005.28 1005.28 48.027 False None None False None False 48280.58256 0 3577867 130089 None code18 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. Sqm 1635.64 1635.64 33.075 False None None False None False 54098.793 0 3577914 130089 None code18 Appendix 1 Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages SR 2023-24Slab 50% Cum 3237.8 3237.8 6.625 False None None False None False 21450.425 0 3577733 130089 None code19 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6816.54 6816.54 2.3625 False None None False None False 16104.07575 0 3577755 130089 None code19 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. DSR 2023-24 Sqm 111.24 111.24 152.645 False None None False None False 16980.2298 0 3577800 130089 None code19 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specificationsand as per directions of Engineer-in-charge.DSR 2023-24 Sqm 262.65 262.65 255.879 False None None False None False 67206.61935 0 3577868 130089 None code19 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. DSR 2023-24 Sqm 111.24 111.24 575.325 False None None False None False 63999.153 0 3577915 130089 None code19 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SR 2023-24 Tonne 92140.71 92140.71 10.708 False None None False None False 986642.72268 0 3577734 130089 None code20 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 364.62 364.62 2.7 False None None False None False 984.474 0 3577756 130089 None code20 Providing and fixing white vitreous china water closet squatting pan Orissa pattern W.C. pan of size 580x440 mm DSR 2023-24 Each 2400.93 2400.93 4.0 False None None False None False 9603.72 0 3577801 130089 None code20 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge DSR 2023-24 Sqm 382.13 382.13 204.019 False None None False None False 77961.78047 0 3577869 130089 None code20 Providing and fixing white vitreous china water closet squatting pan Orissa pattern W.C. pan of size 580x440 mm DSR 2023-24 Each 2400.93 2400.93 18.0 False None None False None False 43216.74 0 3577916 130089 None code20 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8217.34 8217.34 121.7965 False None None False None False 1000843.25131 0 3577735 130089 None code21 RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm Each 16893.03 16893.03 1.0 False None None False None False 16893.03 0 3577757 130089 None code21 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired :W.C. pan with ISI marked black solid plastic seat and lid Each 4980.05 4980.05 1.0 False None None False None False 4980.05 0 3577802 130089 None code21 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm DSR 2023-24 Sqm 1114.46 1114.46 69.7758 False None None False None False 77762.338068 0 3577870 130089 None code21 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired :W.C. pan with ISI marked black solid plastic seat and lid Each 4980.05 4980.05 3.0 False None None False None False 14940.15 0 3577917 130089 None code21 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. DSR 2023-24 Cum 8457.33 8457.33 4.536 False None None False None False 38362.44888 0 3577736 130089 None code22 Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in charge of the work. Job 1938.46 1938.46 1.0 False None None False None False 1938.46 0 3577758 130089 None code22 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15B mm C.P. brass pillar tapsDSR 2023-24 Each 3174.46 3174.46 1.0 False None None False None False 3174.46 0 3577803 130089 None code22 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. DSR 2023-24 Sqm 1433.76 1433.76 9.9 False None None False None False 14194.224 0 3577871 130089 None code22 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15B mm C.P. brass pillar tapsDSR 2023-24 Each 3174.46 3174.46 3.0 False None None False None False 9523.38 0 3577918 130089 None code22 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1005.28 1005.28 82.983 False None None False None False 83421.15024 0 3577759 130089 None code23 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent\ cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Mtr 957.9 957.9 11.0 False None None False None False 10536.9 0 3577804 130089 None code23 Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150mm long bracketsof 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to thewall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Sqm 327.54 327.54 73.125 False None None False None False 23951.3625 0 3577872 130089 None code23 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent\ cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Mtr 957.9 957.9 56.0 False None None False None False 53642.4 0 3577919 130089 None code23 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specificationsand as per directions of Engineer-in-charge.DSR 2023-24 Sqm 262.65 262.65 787.962 False None None False None False 206958.2193 0 3577760 130089 None code24 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Nos 304.88 304.88 40.0 False None None False None False 12195.2 0 3577805 130089 None code24 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. Sqm 1635.64 1635.64 23.625 False None None False None False 38641.995 0 3577873 130089 None code24 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Nos 304.88 304.88 140.0 False None None False None False 42683.2 0 3577920 130089 None code24 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge DSR 2023-24 Sqm 382.13 382.13 971.5816 False None None False None False 371270.476808 0 3577761 130089 None code25 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Nos 5811.26 5811.26 2.0 False None None False None False 11622.52 0 3577806 130089 None code25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. DSR 2023-24 Sqm 111.24 111.24 459.899 False None None False None False 51159.16476 0 3577874 130089 None code25 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Nos 5811.26 5811.26 6.0 False None None False None False 34867.56 0 3577921 130089 None code25 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials,labour, curing, polishing complete as per specifications. Sqm 382.13 382.13 71.9315 False None None False None False 27487.184095 0 3577762 130089 None code26 KSRB 13-13.34 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and but without fittings and the base support for tank Ltr 9.27 9.27 1000.0 False None None False None False 9270.0 0 3577807 130089 None code26 Providing and fixing white vitreous china water closet squatting pan Orissa pattern W.C. pan of size 580x440 mm DSR 2023-24 Each 2400.93 2400.93 12.0 False None None False None False 28811.16 0 3577875 130089 None code26 KSRB 13-13.34 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and but without fittings and the base support for tank Ltr 9.27 9.27 4000.0 False None None False None False 37080.0 0 3577922 130089 None code26 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm DSR 2023-24 Sqm 1114.46 1114.46 113.82 False None None False None False 126847.8372 0 3577763 130089 None code27 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with allitting arrangements & all necessary accessories complete Nos 226.6 226.6 2.0 False None None False None False 453.2 0 3577808 130089 None code27 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired :W.C. pan with ISI marked black solid plastic seat and lid Each 4980.05 4980.05 3.0 False None None False None False 14940.15 0 3577876 130089 None code27 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with allitting arrangements & all necessary accessories complete Nos 226.6 226.6 6.0 False None None False None False 1359.6 0 3577923 130089 None code27 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. DSR 2023-24 Sqm 1433.76 1433.76 118.884 False None None False None False 170451.12384 0 3577764 130089 None code28 13.2 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Nos 294.58 294.58 5.0 False None None False None False 1472.9 0 3577809 130089 None code28 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15B mm C.P. brass pillar tapsDSR 2023-24 Each 3174.46 3174.46 5.0 False None None False None False 15872.3 0 3577877 130089 None code28 13.2 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Nos 294.58 294.58 27.0 False None None False None False 7953.66 0 3577924 130089 None code28 Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150mm long bracketsof 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to thewall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Sqm 327.54 327.54 188.1 False None None False None False 61610.274 0 3577765 130089 None code29 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. DSR 2023-24 Sqm 8524.28 8524.28 2.52 False None None False None False 21481.1856 0 3577810 130089 None code29 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent\ cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Mtr 957.9 957.9 50.0 False None None False None False 47895.0 0 3577878 130089 None code29 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. DSR 2023-24 Sqm 8524.28 8524.28 7.56 False None None False None False 64443.5568 0 3577925 130089 None code29 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. Sqm 1635.64 1635.64 51.975 False None None False None False 85012.389 0 3577766 130089 None code30 Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall20 mm dia Mtr 66.0 66.0 15.0 False None None False None False 990.0 0 3577811 130089 None code30 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Nos 304.88 304.88 104.0 False None None False None False 31707.52 0 3577879 130089 None code30 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge Sqm 824.0 824.0 240.0 False None None False None False 197760.0 0 3577926 130089 None code30 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 101779.45 101779.45 0.12 False None None False None False 12213.534 0 3577767 130089 None code31 Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall25 mm dia Mtr 78.0 78.0 15.0 False None None False None False 1170.0 0 3577812 130089 None code31 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Nos 5811.26 5811.26 10.0 False None None False None False 58112.6 0 3577880 130089 None code31 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 6458.1 6458.1 6.0 False None None False None False 38748.6 0 3577927 130089 None code31 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 5914.26 5914.26 3.78 False None None False None False 22355.9028 0 3577768 130089 None code32 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.1.5 Sq.mm Mtr 26.0 26.0 15.0 False None None False None False 390.0 0 3577813 130089 None code32 KSRB 13-13.34 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and but without fittings and the base support for tank Ltr 9.27 9.27 5000.0 False None None False None False 46350.0 0 3577881 130089 None code32 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall20 mm dia Mtr 66.0 66.0 45.0 False None None False None False 2970.0 0 3577928 130089 None code32 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work to give an even shade after thoroughly brooming thesurface to remove all dirt, dust, mortar drops and foreign matter includingpreparing the surface even and sand paper smooth, cost of materials, labourcomplete as per specifications and as per directions of Engineer-in-charge.SR 2023-24 Sqm 82.4 82.4 429.46 False None None False None False 35387.504 0 3577769 130089 None code33 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.2,5 sq.mm Mtr 42.0 42.0 15.0 False None None False None False 630.0 0 3577814 130089 None code33 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with allitting arrangements & all necessary accessories complete Nos 226.6 226.6 6.0 False None None False None False 1359.6 0 3577882 130089 None code33 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall25 mm dia Mtr 78.0 78.0 30.0 False None None False None False 2340.0 0 3577929 130089 None code33 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. DSR 2023-24 Sqm 111.24 111.24 1199.073 False None None False None False 133384.88052 0 3577770 130089 None code34 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.4 sq.mm Mtr 63.0 63.0 10.0 False None None False None False 630.0 0 3577815 130089 None code34 13.2 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Nos 294.58 294.58 21.0 False None None False None False 6186.18 0 3577883 130089 None code34 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.1.5 Sq.mm Mtr 26.0 26.0 45.0 False None None False None False 1170.0 0 3577930 130089 None code34 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 118.45 118.45 28.8 False None None False None False 3411.36 0 3577771 130089 None code35 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletShort point upto 3 mts from tapping point to out let via switch Point 269.0 269.0 2.0 False None None False None False 538.0 0 3577816 130089 None code35 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. DSR 2023-24 Sqm 8524.28 8524.28 7.56 False None None False None False 64443.5568 0 3577884 130089 None code35 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.2,5 sq.mm Mtr 42.0 42.0 30.0 False None None False None False 1260.0 0 3577931 130089 None code35 Providing and laying flooring with burnt stone slabs 10 cms thick, rough chistle dressed on sand bed 7.5 cms to 8 cms thick and pointed with cement mortar 1:3, , including cost of materials, sand, labour, curing complete as per specifications Sqm 2441.1 2441.1 4.5 False None None False None False 10984.95 0 3577772 130089 None code36 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletMedium point above 3 mts upto 6mts from tapping point to outlet via switch Point 374.0 374.0 2.0 False None None False None False 748.0 0 3577817 130089 None code36 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall20 mm dia Mtr 66.0 66.0 45.0 False None None False None False 2970.0 0 3577885 130089 None code36 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.4 sq.mm Mtr 63.0 63.0 24.0 False None None False None False 1512.0 0 3577932 130089 None code36 Providing and fixing white vitreous china water closet squatting pan Orissa pattern W.C. pan of size 580x440 mm DSR 2023-24 Each 2400.93 2400.93 29.0 False None None False None False 69626.97 0 3577773 130089 None code37 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletLong point above 6 mts upto 10 mts from tapping point to outlet via switch Point 555.0 555.0 2.0 False None None False None False 1110.0 0 3577818 130089 None code37 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall25 mm dia Mtr 78.0 78.0 45.0 False None None False None False 3510.0 0 3577886 130089 None code37 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletShort point upto 3 mts from tapping point to out let via switch Point 269.0 269.0 6.0 False None None False None False 1614.0 0 3577933 130089 None code37 Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings :Flat back wash basin of size 630x450 mmSR 2023-24 Each 1015.58 1015.58 1.0 False None None False None False 1015.58 0 3577774 130089 None code38 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall1 - 3 Way Each 159.0 159.0 3.0 False None None False None False 477.0 0 3577819 130089 None code38 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.1.5 Sq.mm Mtr 26.0 26.0 45.0 False None None False None False 1170.0 0 3577887 130089 None code38 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletMedium point above 3 mts upto 6mts from tapping point to outlet via switch Point 374.0 374.0 6.0 False None None False None False 2244.0 0 3577934 130089 None code38 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired :W.C. pan with ISI marked black solid plastic seat and lid Each 4980.05 4980.05 4.0 False None None False None False 19920.2 0 3577775 130089 None code39 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall4 - 5 Way Each 177.0 177.0 2.0 False None None False None False 354.0 0 3577820 130089 None code39 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.2,5 sq.mm Mtr 42.0 42.0 45.0 False None None False None False 1890.0 0 3577888 130089 None code39 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletLong point above 6 mts upto 10 mts from tapping point to outlet via switch Point 555.0 555.0 6.0 False None None False None False 3330.0 0 3577935 130089 None code39 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15B mm C.P. brass pillar tapsDSR 2023-24 Each 3174.46 3174.46 8.0 False None None False None False 25395.68 0 3577776 130089 None code40 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box3 module Each 161.0 161.0 3.0 False None None False None False 483.0 0 3577821 130089 None code40 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.4 sq.mm Mtr 63.0 63.0 30.0 False None None False None False 1890.0 0 3577889 130089 None code40 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall1 - 3 Way Each 159.0 159.0 9.0 False None None False None False 1431.0 0 3577936 130089 None code40 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent\ cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Mtr 957.9 957.9 210.0 False None None False None False 201159.0 0 3577777 130089 None code41 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box4 module Each 175.0 175.0 2.0 False None None False None False 350.0 0 3577822 130089 None code41 POINT WIRING USING COPPER WIRE WITHOUT SWITCHSupplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletShort point upto 3 mts from tapping point to out let via switch Point 269.0 269.0 6.0 False None None False None False 1614.0 0 3577890 130089 None code41 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall4 - 5 Way Each 177.0 177.0 6.0 False None None False None False 1062.0 0 3577937 130089 None code41 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Mtr 304.88 304.88 275.0 False None None False None False 83842.0 0 3577778 130089 None code42 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 amps one way switch Each 102.0 102.0 6.0 False None None False None False 612.0 0 3577823 130089 None code42 POINT WIRING USING COPPER WIRE WITHOUT SWITCHSupplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletMedium point above 3 mts upto 6mts from tapping point to outlet via switch Point 374.0 374.0 6.0 False None None False None False 2244.0 0 3577891 130089 None code42 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box3 module Each 161.0 161.0 9.0 False None None False None False 1449.0 0 3577938 130089 None code42 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 188.49 188.49 450.0 False None None False None False 84820.5 0 3577779 130089 None code43 Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories complete. Each 971.0 971.0 2.0 False None None False None False 1942.0 0 3577824 130089 None code43 POINT WIRING USING COPPER WIRE WITHOUT SWITCHSupplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletLong point above 6 mts upto 10 mts from tapping point to outlet via switch Point 555.0 555.0 6.0 False None None False None False 3330.0 0 3577892 130089 None code43 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box4 module Each 175.0 175.0 6.0 False None None False None False 1050.0 0 3577939 130089 None code43 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Nos 5811.26 5811.26 18.0 False None None False None False 104602.68 0 3577780 130089 None code44 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898.6-32 Amps SP Each 415.0 415.0 1.0 False None None False None False 415.0 0 3577825 130089 None code44 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall1 - 3 Way Each 159.0 159.0 9.0 False None None False None False 1431.0 0 3577893 130089 None code44 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 amps one way switch Each 102.0 102.0 24.0 False None None False None False 2448.0 0 3577940 130089 None code44 KSRB 13-13.34 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and but without fittings and the base support for tank Ltr 9.27 9.27 8500.0 False None None False None False 78795.0 0 3577781 130089 None code45 Supplying&fixingofretrofittypeLEDbulb......WwithOPALacrylicdiffusercomprisingofLEDsourcewithCCT6500degreeK,CRI70%.efficacy80lumenperW,life25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80.TheLEDaredrivenbyHFelectronicdriverintegratedinthesystem,withPF0.95,powerlossshould5%oflampWage.,shortcircuit&opencircuitprotectiontobeintegratedinthecircuit,THDlessthan20%,LifeasperLM79.Theoperatinginputvoltageshouldbebetween130to275V.BISApprovedandTestedbyNABL/CPRIaccreditedlaboratorywith2yearsWarrantyagainstanymanufacturing defect working under standard electrical conditionLED Bulbs 15W Each 326.0 326.0 6.0 False None None False None False 1956.0 0 3577826 130089 None code45 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall4 - 5 Way Each 177.0 177.0 6.0 False None None False None False 1062.0 0 3577894 130089 None code45 Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories complete. Each 971.0 971.0 6.0 False None None False None False 5826.0 0 3577941 130089 None code45 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with allitting arrangements & all necessary accessories complete Nos 226.6 226.6 8.0 False None None False None False 1812.8 0 3577827 130089 None code46 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 3 module Each 161.0 161.0 9.0 False None None False None False 1449.0 0 3577895 130089 None code46 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898.6-32 Amps SP Each 415.0 415.0 3.0 False None None False None False 1245.0 0 3577942 130089 None code46 13.2 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Nos 294.58 294.58 40.0 False None None False None False 11783.2 0 3577828 130089 None code47 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box4 module Each 175.0 175.0 6.0 False None None False None False 1050.0 0 3577896 130089 None code47 Supplying&fixingofretrofittypeLEDbulb......WwithOPALacrylicdiffusercomprisingofLEDsourcewithCCT6500degreeK,CRI70%.efficacy80lumenperW,life25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80.TheLEDaredrivenbyHFelectronicdriverintegratedinthesystem,withPF0.95,powerlossshould5%oflampWage.,shortcircuit&opencircuitprotectiontobeintegratedinthecircuit,THDlessthan20%,LifeasperLM79.Theoperatinginputvoltageshouldbebetween130to275V.BISApprovedandTestedbyNABL/CPRIaccreditedlaboratorywith2yearsWarrantyagainstanymanufacturing defect working under standard electrical conditionLED Bulbs 15W Each 326.0 326.0 24.0 False None None False None False 7824.0 0 3577943 130089 None code47 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. DSR 2023-24 Sqm 8524.28 8524.28 13.86 False None None False None False 118146.5208 0 3577829 130089 None code48 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 amps one way switch Each 102.0 102.0 12.0 False None None False None False 1224.0 0 3577944 130089 None code48 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 522.21 522.21 11.5625 False None None False None False 6038.053125 0 3577830 130089 None code49 Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories complete. Each 971.0 971.0 4.0 False None None False None False 3884.0 0 3577945 130089 None code49 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall20 mm dia Mtr 66.0 66.0 90.0 False None None False None False 5940.0 0 3577831 130089 None code50 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898.6-32 Amps SP Each 415.0 415.0 3.0 False None None False None False 1245.0 0 3577946 130089 None code50 Electrical Works Concealed Conduit SystemSupplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary with Groove Cutting in Wall25 mm dia Mtr 78.0 78.0 90.0 False None None False None False 7020.0 0 3577832 130089 None code51 Supplying&fixingofretrofittypeLEDbulb......WwithOPALacrylicdiffusercomprisingofLEDsourcewithCCT6500degreeK,CRI70%.efficacy80lumenperW,life25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80.TheLEDaredrivenbyHFelectronicdriverintegratedinthesystem,withPF0.95,powerlossshould5%oflampWage.,shortcircuit&opencircuitprotectiontobeintegratedinthecircuit,THDlessthan20%,LifeasperLM79.Theoperatinginputvoltageshouldbebetween130to275V.BISApprovedandTestedbyNABL/CPRIaccreditedlaboratorywith2yearsWarrantyagainstanymanufacturing defect working under standard electrical conditionLED Bulbs 15W Each 326.0 326.0 16.0 False None None False None False 5216.0 0 3577947 130089 None code51 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.1.5 Sq.mm Mtr 26.0 26.0 105.0 False None None False None False 2730.0 0 3577833 130089 None code52 borewell Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or each 5141 COMMON SCHEDULE OF RATES 152 2023-24 NO SOR CODE DESCRIPTIONS UNIT RATE Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. No 5446.64 5446.64 1.0 False None None False None False 5446.64 0 3577948 130089 None code52 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.2,5 sq.mm Mtr 42.0 42.0 75.0 False None None False None False 3150.0 0 3577834 130089 None code53 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 0 to 50MTR Rmtr 381.1 381.1 50.0 False None None False None False 19055.0 0 3577949 130089 None code53 Using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.4 sq.mm Mtr 63.0 63.0 30.0 False None None False None False 1890.0 0 3577835 130089 None code54 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 50 to 100MTR Rmtr 477.92 477.92 50.0 False None None False None False 23896.0 0 3577950 130089 None code54 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletShort point upto 3 mts from tapping point to out let via switch Point 269.0 269.0 14.0 False None None False None False 3766.0 0 3577836 130089 None code55 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 100 to 150MTR Rmtr 507.79 507.79 50.0 False None None False None False 25389.5 0 3577951 130089 None code55 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletMedium point above 3 mts upto 6mts from tapping point to outlet via switch Point 374.0 374.0 8.0 False None None False None False 2992.0 0 3577837 130089 None code56 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., completedo ITEM NO.2 specification but borewell depth of 150 to 200 Rmtr 589.16 589.16 50.0 False None None False None False 29458.0 0 3577952 130089 None code56 Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outletLong point above 6 mts upto 10 mts from tapping point to outlet via switch Point 555.0 555.0 12.0 False None None False None False 6660.0 0 3577838 130089 None code57 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. Rmtr 1990.99 1990.99 18.0 False None None False None False 35837.82 0 3577953 130089 None code57 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall1 - 3 Way Each 159.0 159.0 12.0 False None None False None False 1908.0 0 3577839 130089 None code58 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (PartII) 1982 with all amendments No 154.5 154.5 4.0 False None None False None False 618.0 0 3577954 130089 None code58 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall4 - 5 Way Each 177.0 177.0 8.0 False None None False None False 1416.0 0 3577840 130089 None code59 Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge each 164 No 168.92 168.92 1.0 False None None False None False 168.92 0 3577955 130089 None code59 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box3 module Each 161.0 161.0 12.0 False None None False None False 1932.0 0 3577841 130089 None code60 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3.00 HP - 155 LPM @ 42 m = 3 STG Outlet Dia - 2.00” No 25064.02 25064.02 1.0 False None None False None False 25064.02 0 3577956 130089 None code60 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box4 module Each 175.0 175.0 8.0 False None None False None False 1400.0 0 3577842 130089 None code61 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694 1990with ISI Mark and as per its latest amendments. Mtr 190.55 190.55 180.0 False None None False None False 34299.0 0 3577957 130089 None code61 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 amps one way switch Each 102.0 102.0 16.0 False None None False None False 1632.0 0 3577843 130089 None code62 Supply and delivery at site of brand new best make non-return valve as 50MM Each 1287.5 1287.5 1.0 False None None False None False 1287.5 0 3577958 130089 None code62 Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories complete. Each 971.0 971.0 6.0 False None None False None False 5826.0 0 3577844 130089 None code63 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e 90MM DAI No 9836.5 9836.5 1.0 False None None False None False 9836.5 0 3577959 130089 None code63 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898.6-32 Amps SP Each 415.0 415.0 4.0 False None None False None False 1660.0 0 3577845 130089 None code64 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations an rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 Rmtr 483.07 483.07 1.0125 False None None False None False 489.108375 0 3577960 130089 None code64 Supplying&fixingofretrofittypeLEDbulb......WwithOPALacrylicdiffusercomprisingofLEDsourcewithCCT6500degreeK,CRI70%.efficacy80lumenperW,life25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80.TheLEDaredrivenbyHFelectronicdriverintegratedinthesystem,withPF0.95,powerlossshould5%oflampWage.,shortcircuit&opencircuitprotectiontobeintegratedinthecircuit,THDlessthan20%,LifeasperLM79.Theoperatinginputvoltageshouldbebetween130to275V.BISApprovedandTestedbyNABL/CPRIaccreditedlaboratorywith2yearsWarrantyagainstanymanufacturing defect working under standard electrical conditionLED Bulbs 15W Each 326.0 326.0 44.0 False None None False None False 14344.0 0 3577846 130089 None code65 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with Rmtr 41.2 41.2 175.0 False None None False None False 7210.0 0 3577961 130089 None code65 RO PLANT Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.Sl. No.1.1, Page No.5 of PWD SR 2021-22 of Volume1. Sqm 93.73 93.73 25.0 False None None False None False 2343.25 0 3577847 130089 None code66 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 6695.0 6695.0 1.0 False None None False None False 6695.0 0 3577962 130089 None code66 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Sl. No.1.14.1, Page No.8 of PWD SR 2021-22 of Volume1. Cum 105.06 105.06 25.758 False None None False None False 2706.13548 0 3577848 130089 None code67 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. Rmtr 200.85 200.85 20.0 False None None False None False 4017.0 0 3577963 130089 None code67 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sl. No.4.1, Page No.5 of PWD SR 2021-22 of Volume2. Sqm 121.54 121.54 16.0 False None None False None False 1944.64 0 3577849 130089 None code68 Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. Nos 3862.5 3862.5 1.0 False None None False None False 3862.5 0 3577964 130089 None code68 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). Sl. No.5.4, Page No.9 of PWD SR 2021-22 of Volume2. Cum 6580.67 6580.67 5.9928 False None None False None False 39436.639176 0 3577965 130089 None code69 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Sl. No.2.1.2, Page No.15 of PWD SR 2021-22 of Volume1. Revised Rate W.E.F From 04-01-2023. Cum 5833.92 5833.92 3.393 False None None False None False 19794.49056 0 3577966 130089 None code70 Providing and laying in position Reinforced cement concrete for allSub structures of building, Irrigation works, Sub structure works ofbridges, Drain works & other parallel works from 0.50m to 3.50 mheight. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with superplasticisers, laid in layers, well compacted using needle vibrators,providing weep holes wherever necesary, including all lead & lifts, costof all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other. appurtenances required to complete the work as per technicalspecifications. (The cost of steel reinforcement & formwork to be paidseparately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Sl. No.2.4.3, Page No.17 of PWD SR 2021-22 of Volume1. Revised Rate W.E.F From 04-01-2023. Cum 6526.08 6526.08 2.7 False None None False None False 17620.416 0 3577967 130089 None code71 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Sl. No.2.5.2, Page No.17 of PWD SR 2021-22 of Volume1. Revised Rate W.E.F From 04-01-2023. Cum 7048.29 7048.29 6.455 False None None False None False 45496.71195 0 3577968 130089 None code72 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Sl. No.1.9, Page No.7 of PWD SR 2021-22 of Volume1. Cum 273.98 273.98 15.1376 False None None False None False 4147.399648 0 3577969 130089 None code73 Appendix I Additionalities for Formwork, Centering & Scaffolding. Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Roads & Bridges depending upon the type of structure. These percentages are worked out based on empirical mathematical approaches & exhaustive studies on the common standard sizes of the type of the structure of Buildings, Irrigation works, Bridges, Water works etc. The use rate of shuttering material is considered at 40 repetitions and type of material to be used is steel centering. Revision to 2021-22 VOL.1 COMMON SR- PAGE : 115 - 116 W.E.F 01.09.2022.Percentage on finished rate of concrete per m3. For Footing. (8%) Sqm 522.08 522.08 2.7 False None None False None False 1409.616 0 3577970 130089 None code74 Appendix I Additionalities for Formwork, Centering & Scaffolding. Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Roads & Bridges depending upon the type of structure. These percentages are worked out based on empirical mathematical approaches & exhaustive studies on the common standard sizes of the type of the structure of Buildings, Irrigation works, Bridges, Water works etc. The use rate of shuttering material is considered at 40 repetitions and type of material to be used is steel centering. Revision to 2021-22 VOL.1 COMMON SR- PAGE : 115 - 116 W.E.F 01.09.2022.Percentage on finished rate of concrete per m3. For Columns. (70%) Sqm 4933.8 4933.8 2.07 False None None False None False 10212.966 0 3577971 130089 None code75 Appendix I Additionalities for Formwork, Centering & Scaffolding. Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Roads & Bridges depending upon the type of structure. These percentages are worked out based on empirical mathematical approaches & exhaustive studies on the common standard sizes of the type of the structure of Buildings, Irrigation works, Bridges, Water works etc. The use rate of shuttering material is considered at 40 repetitions and type of material to be used is steel centering. Revision to 2021-22 VOL.1 COMMON SR- PAGE : 115 - 116 W.E.F 01.09.2022.Percentage on finished rate of concrete per m3. For Lintel Beams and roof beams (60%) Sqm 4228.97 4228.97 0.6265 False None None False None False 2649.449705 0 3577972 130089 None code76 Appendix I Additionalities for Formwork, Centering & Scaffolding. Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Roads & Bridges depending upon the type of structure. These percentages are worked out based on empirical mathematical approaches & exhaustive studies on the common standard sizes of the type of the structure of Buildings, Irrigation works, Bridges, Water works etc. The use rate of shuttering material is considered at 40 repetitions and type of material to be used is steel centering. Revision to 2021-22 VOL.1 COMMON SR- PAGE : 115 - 116 W.E.F 01.09.2022.Percentage on finished rate of concrete per m3. For Roof. (50%) Sqm 3524.14 3524.14 3.2725 False None None False None False 11532.74815 0 3577973 130089 None code77 Appendix I Additionalities for Formwork, Centering & Scaffolding. Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Roads & Bridges depending upon the type of structure. These percentages are worked out based on empirical mathematical approaches & exhaustive studies on the common standard sizes of the type of the structure of Buildings, Irrigation works, Bridges, Water works etc. The use rate of shuttering material is considered at 40 repetitions and type of material to be used is steel centering. Revision to 2021-22 VOL.1 COMMON SR- PAGE : 115 - 116 W.E.F 01.09.2022.Percentage on finished rate of concrete per m3. For Chejja (45%) Sqm 3171.73 3171.73 0.486 False None None False None False 1541.46078 0 3577974 130089 None code78 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Building Tonne 92140.71 92140.71 0.9363 False None None False None False 86271.346773 0 3577975 130089 None code79 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (P. No.13, I. No.6.7, Volume-2,) Revised Rate W.E.F. 04-01-2023 Cum 8457.33 8457.33 4.4022 False None None False None False 37230.858126 0 3577976 130089 None code80 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No.8.1.1. Page No.41 of PWD SR 2021-22 of Volume2.Revised Rate W.E.F. 04-01-2023 Sqm 262.65 262.65 12.5316 False None None False None False 3291.42474 0 3577977 130089 None code81 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No.8.9, Page No.42 of PWD SR 2021-22 of Volume2.Revised Rate W.E.F. 04-01-2023 Sqm 382.13 382.13 66.4 False None None False None False 25373.432 0 3577978 130089 None code82 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No.8.5.1, Page No.42 of PWD SR 2021-22 of Volume2.Revised Rate W.E.F. 04-01-2023 Sqm 376.98 376.98 10.62 False None None False None False 4003.5276 0 3577979 130089 None code83 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm ( Vol -2, I No - 9.22.2 , P No - 63, PWD SR - 2021-22 ) Sqm 1365.78 1365.78 14.411 False None None False None False 19682.25558 0 3577980 130089 None code84 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Sl. No.11.34A, Page No.85 of PWD SR 2021-22 of Volume2.Revised Rate W.E.F. 04-01-2022 Kgs 173.04 173.04 233.1 False None None False None False 40335.624 0 3577981 130089 None code85 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)Sl. No.12.90, Page No.112 of PWD SR 2021-22 of Volume2. Sqm 6936.02 6936.02 11.1 False None None False None False 76989.822 0 3577982 130089 None code86 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 2742.89 2742.89 5.25 False None None False None False 14400.1725 0 3577983 130089 None code87 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl. No.8.40, Page No.48 of PWD SR 2021-22 of Volume2. Sqm 118.45 118.45 16.35 False None None False None False 1936.6575 0 3577984 130089 None code88 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl. No.8.30, Page No.46 of PWD SR 2021-22 of Volume2. Sqm 179.22 179.22 66.4 False None None False None False 11900.208 0 3577985 130089 None code89 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ( Vol -2, I No - 8.33.1 , P No - 46, PWD SR - 2021-22 ) Sqm 162.74 162.74 10.62 False None None False None False 1728.2988 0 3577986 130089 None code90 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary, 19/20 mm dia 2 mm thick Mtr 66.0 66.0 25.0 False None None False None False 1650.0 0 3577987 130089 None code91 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch box. Point 394.0 394.0 1.0 False None None False None False 394.0 0 3577988 130089 None code92 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. PWD Electrical SR 2021-22 Long point above 6m upto 10m from tapping point to out let via switch box Point 570.0 570.0 2.0 False None None False None False 1140.0 0 3577989 130089 None code93 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. PWD Electrical SR 2021-22, Three outlet in a row, above 6m upto 10m from tapping point to out let via switche Point 1035.0 1035.0 2.0 False None None False None False 2070.0 0 3577990 130089 None code94 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694 confirming to latest amendments.PWD Electrical SR 2021-22, 1.5 mm2 Mtr 26.0 26.0 90.0 False None None False None False 2340.0 0 3577991 130089 None code95 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694 confirming to latest amendments.PWD Electrical SR 2021-22, 2.5 mm2 Mtr 42.0 42.0 90.0 False None None False None False 3780.0 0 3577992 130089 None code96 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694 confirming to latest amendments. PWD Electrical SR 2021-22, 4 mm2 Mtr 63.0 63.0 45.0 False None None False None False 2835.0 0 3577993 130089 None code97 Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654, 6A 3/5 Way Each 147.0 147.0 4.0 False None None False None False 588.0 0 3577994 130089 None code98 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch Each 326.0 326.0 4.0 False None None False None False 1304.0 0 3577995 130089 None code99 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket Each 236.0 236.0 8.0 False None None False None False 1888.0 0 3577996 130089 None code100 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, 1-3 Way Each 138.0 138.0 1.0 False None None False None False 138.0 0 3577997 130089 None code101 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, 4-5 Way Each 177.0 177.0 2.0 False None None False None False 354.0 0 3577998 130089 None code102 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall,10-12 way Each 319.0 319.0 2.0 False None None False None False 638.0 0 3577999 130089 None code103 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall,16-18 way Each 405.0 405.0 1.0 False None None False None False 405.0 0 3578000 130089 None code104 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module Each 161.0 161.0 1.0 False None None False None False 161.0 0 3578001 130089 None code105 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.4-5 Module Each 175.0 175.0 2.0 False None None False None False 350.0 0 3578002 130089 None code106 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.10-12 Module Each 344.0 344.0 2.0 False None None False None False 688.0 0 3578003 130089 None code107 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.16-18 Module Each 457.0 457.0 1.0 False None None False None False 457.0 0 3578004 130089 None code108 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned Each 5992.0 5992.0 1.0 False None None False None False 5992.0 0 3578005 130089 None code109 Supplying and Fixing........mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/ tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires. Using 25mm dia G.I.Pipe Each 1203.0 1203.0 1.0 False None None False None False 1203.0 0 3578006 130089 None code110 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. Each 162.0 162.0 1.0 False None None False None False 162.0 0 3578007 130089 None code111 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition, LED square or round down light 10-12W Each 885.0 885.0 1.0 False None None False None False 885.0 0 3578008 130089 None code112 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast /extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 1'x1' 34-22 W Each 3138.0 3138.0 1.0 False None None False None False 3138.0 0 3578009 130089 None code113 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast /extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2'x2' /1'x4' 34-36 W Each 3692.0 3692.0 1.0 False None None False None False 3692.0 0 3578010 130089 None code114 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 9W, 6500K Each 154.0 154.0 1.0 False None None False None False 154.0 0 3578011 130089 None code115 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling /rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders. Each 122.0 122.0 4.0 False None None False None False 488.0 0 3578012 130089 None code116 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Lamp Holder Each 102.0 102.0 4.0 False None None False None False 408.0 0 3578013 130089 None code117 Supplying And Fixing Metal Fan Box with Round Hook. Each 163.0 163.0 2.0 False None None False None False 326.0 0 3578014 130089 None code118 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model Each 2984.0 2984.0 2.0 False None None False None False 5968.0 0 3578015 130089 None code119 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module Each 357.0 357.0 2.0 False None None False None False 714.0 0 3578016 130089 None code120 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 315.0 315.0 2.0 False None None False None False 630.0 0 3578017 130089 None code121 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 12 Way SP & N Each 1863.0 1863.0 1.0 False None None False None False 1863.0 0 3578018 130089 None code122 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 32-40 A 2 pol Each 4277.0 4277.0 1.0 False None None False None False 4277.0 0 3578019 130089 None code123 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.PWD Electrical SR 2021-22, 5-32 DP Each 793.0 793.0 1.0 False None None False None False 793.0 0 3578020 130089 None code124 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. PWD Electrical SR 2021-22, 14SWG Sq CM 0.43 0.43 3600.0 False None None False None False 1548.0 0 3578021 130089 None code125 Supplying .. A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic /FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete, 100 A 4 x 30 x 6 mm Aluminium Strips. Mtr 2465.0 2465.0 1.0 False None None False None False 2465.0 0 3578022 130089 None code126 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm. Mtr 395.0 395.0 3.0 False None None False None False 1185.0 0 3578023 130089 None code127 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 515.0 515.0 3.0 False None None False None False 1545.0 0 3578024 130089 None code128 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 5705.0 5705.0 1.0 False None None False None False 5705.0 0 3578025 130089 None code129 Digging of Pit for providing GI Pipe type Earthing, Hard Soil, Bescom SR 2021-22 No 2990.0 2990.0 1.0 False None None False None False 2990.0 0 3578026 130089 None code130 GI Grounding pipe, B Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg, Bescom SR 2021-22 Each 743.0 743.0 1.0 False None None False None False 743.0 0 3578027 130089 None code131 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each Each 676.0 676.0 1.0 False None None False None False 676.0 0 3578028 130089 None code132 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag.Bescom SR 2021-22 Each 310.0 310.0 1.0 False None None False None False 310.0 0 3578029 130089 None code133 GI Wire 8 SWG Kg 77.85 77.85 3.0 False None None False None False 233.55 0 3578030 130089 None code134 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed.In Hard Soil Cum 389.0 389.0 15.0 False None None False None False 5835.0 0 3578031 130089 None code135 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975,16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) Km 183442.0 183442.0 0.04 False None None False None False 7337.68 0 3578032 130089 None code136 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff, Bescom SR 2021-22, 35 to 95 Sqmm Km 16159.0 16159.0 0.04 False None None False None False 646.36 0 3578033 130089 None code137 GI Pipe B - Class as per IS-1239. GI Pipe - 50 mm Dia Mtr 295.0 295.0 6.0 False None None False None False 1770.0 0 3578034 130089 None code138 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.. 32 amps Each 401.0 401.0 1.0 False None None False None False 401.0 0 3578035 130089 None code139 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Each 725.0 725.0 2.0 False None None False None False 1450.0 0 3578036 130089 None code140 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 :HDPE Grade PE80-PN6.0,110mm dia Mtr 469.0 469.0 6.0 False None None False None False 2814.0 0 3578037 130089 None code141 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 110mm dia., 6 kg/sqcm & class 3 Mtr 411.0 411.0 30.0 False None None False None False 12330.0 0 3578038 130089 None code142 1500 LPH SS Ro Plant 1 Raw water Pump 1HP Wilo/Lubi 12 High Pressure Pump 3 HP (4-16) Lyson 13 Dosing Pump 6 LPH Veritho 14 Pressure Vessel 1465T SS304-Imported 25 Multiport Valve 1" Real mount-TMF 26 Filter Media (Sand) Water wash 1507 Granular Activated Carbon Water wash 758 Flow Meters 2400lph panel mounted 29 SS filter Housing 20" x 3ele SS304 110 Jumbo Filter 2.5" Spun 311 Control Pannel Automatic Panel1:1 Proton 112 Membrane 80-40 Envo 213 Membrane Housing 8080:2E SS304-imported 114 Pressure Gauge 10 kg and 21kg Inline 315 Low/high Pressure Switch Danfor 216 Skid 1" SS 117 Plant Pipe SS304 1 lot18 Assembling 1 Unit 259000.0 259000.0 1.0 False None None False None False 259000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1721637259000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1721637259000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1721637259000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1721637259000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1721637259000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1721637277000 0 None None ELIGIBILITY Successful bidder should abide by the guidelines / orders/ changes if any issued by the state govt from time to time None 1721637292000 0 None None ELIGIBILITY ALL TERMS AND CONDITIONS AS PER TENDER DOCUMENT None 1721637304000 0 None None ELIGIBILITY The earnest money deposit will be forfeited if the documents submitted by the tenderer found to be misleading/forged or fake None 1721637315000 0 None None ELIGIBILITY TOTAL BOQ AMOUNT IS EXECULDING GST None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Executed in any one year (for a continuous period of 12 months) the following minimum quantities of work 1)Earth work excavation-625.43 cum 2)PCC M10-146.78 cum 3)M20/25-135.80 cum 4)Embnkment-1797.68cum 5)STEEL -17.28 Tonne 6)BBM-165.00cum 7)PALSTERING-2421.71sqm 8)FLOORING-240.24sqm 9)SSM/UCR-77.83cum Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Satisfactory completed, at least one similar Building works of value not less than Rs. 96.82 Lakhs as prime contractor (last five years i.e., 2019-20 to 2023-24) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None liquid assets and or availability of credit facilities of not less than Rs. 58.09 Lakhs (Banker certificate/Credit lines/ letters of credit/ certificates from banks for meeting the fund requirement etc Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Achieved in at least two financial years a minimum annual financial turnover of Rs . 387.30 Lakhs. (Usually not less than two times the estimated cost under this contract)(last five years i.e., 2019-20 to 2023-24) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate False Technical Bid Company Registration Certificate False Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1721638494000 version 0 createdDate None modifiedDate None blockNumber District urban Development cell Bagalkot street None city BAGALKOT state Karnataka pin 587103
tenderRecallDTO	None