| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1721133805000 | 0 | None | None | Roads | Improvements of road from KM 0.00 to 0.07 LHS | 37278115.57 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3536288 | 127429 | None | Vol-3,P. No-15 - I.No-3.5 | Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead ( Vol-3,P. No-15 - I.No-3.5) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Sqm | 7.08 | 7.08 | 10367.5 | False | None | None | False | None | False | 73401.9 | 0 | | 3536289 | 127429 | None | Vol-3,P. No-23 - I.No-4.1A(V) | Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 .For Grading -V Material ( Vol-3,P. No-23 - I.No-4.1A(V) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 2934.66 | 2934.66 | 395.0 | False | None | None | False | None | False | 1159190.7 | 0 | | 3536290 | 127429 | None | Vol-3, P. No-42 - I.No-6.1 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS- 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15-1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg- m3 optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing ( Vol-3, P. No-42 - I.No-6.1) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 5805.6 | 5805.6 | 1244.25 | False | None | None | False | None | False | 7223617.8 | 0 | | 3536291 | 127429 | None | Vol-3, P. No-49 - I.No-6.2 | Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg-m3, coarse and fine aggregate conforming to IS 383-2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing ( Vol-3, P. No-49 - I.No-6.2) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 10691.98 | 10691.98 | 2073.75 | False | None | None | False | None | False | 22172493.525 | 0 | | 3536292 | 127429 | None | Vol-3,P. No-29 - I.No-5.1A(i) | Providing and applying primer coat with SS1 grade BitumenEmulsion on prepared surface of granular base includingcleaning of road surface and spraying primer at the rate of 0.70kg-m2 using mechanical means. ( Vol-3,P. No-29 - I.No-5.1A(i) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Sqm | 48.38 | 48.38 | 3850.0 | False | None | None | False | None | False | 186263.0 | 0 | | 3536293 | 127429 | None | Vol-3,P. No-32 - I.No-5.10(c) | Providing and laying Dense Graded Bituminous Macadamwith 100 TPH capacity hot mix plant batch type using crushedaggregates of specified grading, premixed with bituminousbinder VG-30, @ 4.0 per cent by weight of total mix and fillertransporting the hot mix to work site, laying with mechanicalpaver finisher to the required grade, level and alignment, rollingwith smooth wheeled, vibratory and tandem rollers to achievethe desired compaction as per MoRTH specification clauseNo. 505 complete in all respects. ( Vol-3,P. No-32 - I.No-5.10(c) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 10359.22 | 10359.22 | 192.5 | False | None | None | False | None | False | 1994149.85 | 0 | | 3536294 | 127429 | None | Vol-3,P. No-31 - I.No-5.4(ii) | Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg-m2 on Granular Sur. ( Vol-3,P. No-43 - I.No-5.33 ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Sqm | 17.7 | 17.7 | 3850.0 | False | None | None | False | None | False | 68145.0 | 0 | | 3536295 | 127429 | None | Vol-3,P. No-34 - I.No-5.14(c) | Providing and laying Bituminous Concrete with 40-60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and filler, transporting the hot mix to work site,laying with mechanical paver finisher to the required grade,level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects ( Vol-3,P. No-34 - I.No-5.14(c) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 12538.68 | 12538.68 | 115.5 | False | None | None | False | None | False | 1448217.54 | 0 | | 3536296 | 127429 | None | Vol-3,P. No-57 - I.No-8.15 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g-m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC-35-2015.The finished surface to be level, uniform and free from streaks and holes ( Vol-3,P. No-57 - I.No-8.15) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Sqm | 625.4 | 625.4 | 137.5 | False | None | None | False | None | False | 85992.5 | 0 | | 3536297 | 127429 | None | Vol-1,P. No-15 - I.No-2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1-3-6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (Vol-1,P. No-15 - I.No-2.1.4) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 7336.06 | 7336.06 | 5.62 | False | None | None | False | None | False | 41228.6572 | 0 | | 3536298 | 127429 | None | Vol-1,P. No-15 - I.No-2.2.1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Vol-1,P. No-15 - I.No-2.2.1) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 7418.66 | 7418.66 | 35.0 | False | None | None | False | None | False | 259653.1 | 0 | | 3536299 | 127429 | None | Vol-1, P.115-2 | Add centering charges 35% ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 2596.53 | 2596.53 | 35.0 | False | None | None | False | None | False | 90878.55 | 0 | | 3536300 | 127429 | None | Page no. 18 Item no. 2.11(h) Volume 1 | Supplying, fitting and placing TMT FE 550 - 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping-welding joints, tying with binding wire - soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.( Page no. 18 Item no. 2.11(h) Volume 1) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | MT | 93232.98 | 93232.98 | 1.05 | False | None | None | False | None | False | 97894.629 | 0 | | 3536301 | 127429 | None | Page no. 84 Item no. 11.26.1 Volume 2 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works,including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery completeas per specifications and as per directions of the Engineer-in-Charge.( Page no. 84 Item no. 11.26.1 Volume 2) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Kg / Sqm | 162.84 | 162.84 | 12600.0 | False | None | None | False | None | False | 2051784.0 | 0 | | 3536302 | 127429 | None | Vol-2-P 48 -8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade -Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Vol-2-P 48 -8.4) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Sqm | 135.7 | 135.7 | 1925.0 | False | None | None | False | None | False | 261222.5 | 0 | | 3536303 | 127429 | None | Vol-3,P. No-7 - I.No-2.5(II B) | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer In area of light jungle ( Vol-3,P. No-7 - I.No-2.5(II B)) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | 100 Sqm | 463.74 | 463.74 | 13.2 | False | None | None | False | None | False | 6121.368 | 0 | | 3536304 | 127429 | None | Vol-3,P. No-7 - I.No-2.5(II B) | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer In area of light jungle ( Vol-3,P. No-7 - I.No-2.5(II B)) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | 100 Sqm | 463.74 | 463.74 | 13.2 | False | None | None | False | None | False | 6121.368 | 0 | | 3536305 | 127429 | None | Vol-3,P. No-7 - I.No-2.5(II B) | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer In area of light jungle ( Vol-3,P. No-7 - I.No-2.5(II B)) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | 100 Sqm | 463.74 | 463.74 | 13.2 | False | None | None | False | None | False | 6121.368 | 0 | | 3536306 | 127429 | None | Vol-3 p91-105 | Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504 using HMP 40-60 TPH Capacity compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 Vol-3 p91-105 ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Sqm | 502.68 | 502.68 | 15.12 | False | None | None | False | None | False | 7600.5216 | 0 | | 3536307 | 127429 | None | Vol-3 p91-105 | Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504 using HMP 40-60 TPH Capacity compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 Vol-3 p91-105 ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Sqm | 502.68 | 502.68 | 30.25 | False | None | None | False | None | False | 15206.07 | 0 | | 3536308 | 127429 | None | Vol-3 p91-105 | Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504 using HMP 40-60 TPH Capacity compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 Vol-3 p91-105 ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Sqm | 502.68 | 502.68 | 45.38 | False | None | None | False | None | False | 22811.6184 | 0 |
| | 1721133805000 | 0 | None | None | Roads | Construction of Rcc drain | 6385213.69 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3536309 | 127430 | None | Vol-1, P 8-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m (Vol-1, P 8/1.14.1) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 120.36 | 120.36 | 1365.0 | False | None | None | False | None | False | 164291.4 | 0 | | 3536310 | 127430 | None | Vol-1, P.15-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (Vol-1, P.15/2.1.3) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 7067.02 | 7067.02 | 130.0 | False | None | None | False | None | False | 918712.6 | 0 | | 3536311 | 127430 | None | Vol-1, P.15-2.2.1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Vol-1, P.15/2.2.1) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 7418.66 | 7418.66 | 402.2 | False | None | None | False | None | False | 2983785.052 | 0 | | 3536312 | 127430 | None | Vol-1, P.115-2 | Add Centering charges for Rcc drain (Vol-1, P.115/2) 35% ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 2596.53 | 2596.53 | 402.2 | False | None | None | False | None | False | 1044324.366 | 0 | | 3536313 | 127430 | None | Page no. 18 Item no. 2.11 Volume 1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.( Page no. 18 Item no. 2.11 Volume 1) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | MT | 105559.26 | 105559.26 | 12.07 | False | None | None | False | None | False | 1274100.2682 | 0 |
| | 1721133805000 | 0 | None | None | Roads | Estimate for Electrification Works | 2820451.15 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3536314 | 127431 | None | 4.2.7 | Fabricating, supplying and erection of ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m-s for m Pole in single section and single joint welded as per IS 9595- IS10178AWS having dimensions bottom mm, top mm with 3 mm thick, suitable base plate and 4Nos of long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 9 m - Top 70 mm and Bottom 155 mm dia 9 m - Top 70 mm and Bottom 155 mm dia ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 23700.3 | 23700.3 | 32.0 | False | None | None | False | None | False | 758409.6 | 0 | | 3536315 | 127431 | None | 4.6.5 | Supplying and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 1500 mm Standard 40-50 mm dia ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 4010.82 | 4010.82 | 32.0 | False | None | None | False | None | False | 128346.24 | 0 | | 3536316 | 127431 | None | 11.8.4 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment and impact resistance of complete luminaire greater than IK08. Power Factor greater than0.9 with mains, Surge Protection- Min 5KV along with Over voltage- Overload, short circuit- miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50-60Hz application. Compliance to IS 10322-IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiencygreater than1301m-w, nominal CRI greater than75. Luminaire manufacturer should have in-house facility accredited by NABL-CPRI and any Government certified agency and Design and Development facility certified by ISO 9001-2008. Housing with supplier word mark -name shall be Engraved - Embossing on the die cast housing- Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree-Nichia- Lumileds-Osram make LED Source. (Make - Philips - Bajaj - Havells - Panasonic - Syska) LED Streetlight 90 W ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Nos | 10768.44 | 10768.44 | 64.0 | False | None | None | False | None | False | 689180.16 | 0 | | 3536317 | 127431 | None | 13.5 | Fixing halogen-metal halide -SVL-IL-LED flood light fitting over existing pole - wall ceiling including clamp, bolts, nuts and wiring using suitable capacity wires. ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 245.51 | 245.51 | 64.0 | False | None | None | False | None | False | 15712.64 | 0 | | 3536318 | 127431 | None | 1.1.4 | Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc and fixing using inverted wood plugs in case of RCC ceiling and RCC wall- stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. (Make - VIP - Nandi - VI plast) 40 mm dia 2.5 mm thick ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Mtr | 181.09 | 181.09 | 40.0 | False | None | None | False | None | False | 7243.6 | 0 | | 3536319 | 127431 | None | 2.3.4 | Wiring for lighting-power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694-confirming to latest amendments. (Make - Havells - Finolex - Anchor - Polycab - V-Gaurd) 4 mm2 ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Mtr | 76.57 | 76.57 | 50.0 | False | None | None | False | None | False | 3828.5 | 0 | | 3536320 | 127431 | None | 2.5.8 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS-694-2010 (Make -V-Gaurd - Universal - Polycab - Finolex) - 3C x 2.5 mm2 ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Mtr | 137.34 | 137.34 | 460.0 | False | None | None | False | None | False | 63176.4 | 0 | | 3536321 | 127431 | None | 5.42.1 | Fabricating supplying and mounting MS box made out WG suitable for floor -wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamp with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. - 14 SWG. ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Sq CM | 0.61 | 0.61 | 50000.0 | False | None | None | False | None | False | 30500.0 | 0 | | 3536322 | 127431 | None | 5.41.1 | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Mtr | 370.7 | 370.7 | 4.0 | False | None | None | False | None | False | 1482.8 | 0 | | 3536323 | 127431 | None | 5.41.3 | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 75 x 6 mm ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Mtr | 674.55 | 674.55 | 2.0 | False | None | None | False | None | False | 1349.1 | 0 | | 3536324 | 127431 | None | 5.40.1 | Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic-FRP-DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | m | 2995.96 | 2995.96 | 2.0 | False | None | None | False | None | False | 5991.92 | 0 | | 3536325 | 127431 | None | 5.47 | Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc) 3-120 sec setting. (Make - ABB - Indo Asian - Havells - Schinder) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Sqm | 2813.65 | 2813.65 | 2.0 | False | None | None | False | None | False | 5627.3 | 0 | | 3536326 | 127431 | None | 5.13.3 | Supply and fixing of 4pole power contactor with NO-NC contacts on existing wood-panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. (Make - ABB - Indo Asian - Havells - Schinder ) - 60 A ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 7231.63 | 7231.63 | 2.0 | False | None | None | False | None | False | 14463.26 | 0 | | 3536327 | 127431 | None | 5.7.3 | Supplying and fixing of Porcelain fuse channel with cut out on existing wooden-panel using necessary nuts, bolts and washers. - 63 A ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 487.38 | 487.38 | 12.0 | False | None | None | False | None | False | 5848.56 | 0 | | 3536328 | 127431 | None | 3.9 | Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Sq CM | 0.43 | 0.43 | 4500.0 | False | None | None | False | None | False | 1935.0 | 0 | | 3536329 | 127431 | None | 5.27 | Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 243.08 | 243.08 | 4.0 | False | None | None | False | None | False | 972.32 | 0 | | 3536330 | 127431 | None | 5.28 | Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 194.46 | 194.46 | 4.0 | False | None | None | False | None | False | 777.84 | 0 | | 3536331 | 127431 | None | 5.30 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 1677.25 | 1677.25 | 2.0 | False | None | None | False | None | False | 3354.5 | 0 | | 3536332 | 127431 | None | 5.21 | Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest micro controller based, digital readout of percentage leakage current, programmable delay-auto- manual reset facility suitable to mount on DIN rail- flush mounting on panel board. (Make - ABB - Indo Asian - Havells - Schinder ) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 11248.53 | 11248.53 | 2.0 | False | None | None | False | None | False | 22497.06 | 0 | | 3536333 | 127431 | None | 5.18.4 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON- OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. (Make - ABB - Indo Asian - Havells - Schinder ) 6-32 A DP ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 898.18 | 898.18 | 32.0 | False | None | None | False | None | False | 28741.76 | 0 | | 3536334 | 127431 | None | 5.18.7 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON- OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. (Make - ABB - Indo Asian - Havells - Schinder ) 6-32 A TPN ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 2086.84 | 2086.84 | 2.0 | False | None | None | False | None | False | 4173.68 | 0 | | 3536335 | 127431 | None | 5.18.8 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON- OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. (Make - ABB - Indo Asian - Havells - Schinder ) 40 A TPN ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 3699.68 | 3699.68 | 2.0 | False | None | None | False | None | False | 7399.36 | 0 | | 3536336 | 127431 | None | 5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230-440VAC. 50 Hz 12-24V D.C. ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Each | 625.93 | 625.93 | 6.0 | False | None | None | False | None | False | 3755.58 | 0 | | 3536337 | 127431 | None | ESCOM SR 2023-24 (Sl.No.-249 Item No.-35.01) | Making and fixing of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable as per BESCOM specification (BESCOM SR Page - 445) Up to 4C x 50 Sqmm ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Set | 393.79 | 393.79 | 2.0 | False | None | None | False | None | False | 787.58 | 0 | | 3536338 | 127431 | None | ESCOM SR 2023-24 (Sl.No.197 Item No - 32) | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 as per BESCOM specification. (Page - 443) (Make -V-Gaurd - Universal - Polycab - Finolex) 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Km | 172394.77 | 172394.77 | 0.95 | False | None | None | False | None | False | 163775.0315 | 0 | | 3536339 | 127431 | None | ESCOM SR 2023-24 (Sl.No.197 Item No - 32) | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 as per BESCOM specification. (Page - 443) (Make -V-Gaurd - Universal - Polycab - Finolex) 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Km | 169607.85 | 169607.85 | 0.08 | False | None | None | False | None | False | 13568.628 | 0 | | 3536340 | 127431 | None | ESCOM SR 2023-24 (CDS-19) | Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soil (Page - 365) a) Cable trench excavation, 1000x 0.6x1 is equals to 600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No. 1.17.1) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 318.43 | 318.43 | 618.0 | False | None | None | False | None | False | 196789.74 | 0 | | 3536341 | 127431 | None | ESCOM SR 2023-24 (CDS-19) | Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soil (Page - 365) c) Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 194.46 | 194.46 | 618.0 | False | None | None | False | None | False | 120176.28 | 0 | | 3536342 | 127431 | None | ESCOM SR 2023-24 (Sl.No.-174 Item No.- | Laying of Cabel in existing trench -GI Pipe-Stone ware -RCC Hume pipe using wooden-Aluminium rollersas directed by the departmental Staff. 2.5 to m25 Sqmm ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Km | 25384.84 | 25384.84 | 1.03 | False | None | None | False | None | False | 26146.3852 | 0 | | 3536343 | 127431 | None | ESCOM SR 2023-24 (CDS-1) | Supplying and Fixing of Spiral Earth Electrode as per BESCOM Specification. (Page - 347) (239 and 93) ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Nos | 403.51 | 403.51 | 32.0 | False | None | None | False | None | False | 12912.32 | 0 | | 3536344 | 127431 | None | 12.57 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Nos | 5172.74 | 5172.74 | 4.0 | False | None | None | False | None | False | 20690.96 | 0 | | 3536345 | 127431 | None | ESCOM SR 2023-24 (Sl.No.-60 Item No.-8.01) | Supplying of Guy Wire and GI Wire as per BESCOM Specification. (Page-435-436) 8 SWG GI Wire(4.064 mm Dia), Std Wt- 131 Kg-KM ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | MT | 91203.62 | 91203.62 | 0.04 | False | None | None | False | None | False | 3648.1448 | 0 | | 3536346 | 127431 | None | civil SR Vol 1 Page No.-5 Item No.- 1.4 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools and other appurtenaces required to complete the work. (Page-78) In all kinds of soils Depth upto 1.5 m ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 294.13 | 294.13 | 9.17 | False | None | None | False | None | False | 2697.1721 | 0 | | 3536347 | 127431 | None | civil SR Vol 1 Page No.-18 Item No.- 2.11 | Supplying, fitting and placing TMT FE 550-550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping-welding joints, tying with binding wire - soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (Page - 91) All other type of structures ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | MT | 96029.97 | 96029.97 | 0.655 | False | None | None | False | None | False | 62899.63035 | 0 | | 3536348 | 127431 | None | Vol 1 Page No.-15 Item No.- 2.1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (Page. - 88) Mix 1-3-6 Using 40 mm nominal size graded crushed coarse aggregates ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 7279.03 | 7279.03 | 1.02 | False | None | None | False | None | False | 7424.6106 | 0 | | 3536349 | 127431 | None | Vol 1 Page No.-15 Item No.- 2.2 | Providing and laying in position Cement Concrete for all Foundation works. The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Page. - 88) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Cum | 7641.22 | 7641.22 | 25.09 | False | None | None | False | None | False | 191718.2098 | 0 | | 3536350 | 127431 | None | BWSSB SR 2023-24 Page - 113 Sl.No.-10.1 | Providing PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For- (Page-164) PVC pipes 63mm dia., 6 kg-sqcm and class 3 ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | m | 195.68 | 195.68 | 950.0 | False | None | None | False | None | False | 185896.0 | 0 | | 3536351 | 127431 | None | ESCOM SR 2023-24 (Sl.No.-469 Item No.-60.01) | Supplying of Aluminium End Terminal (Lug) as per BESCOM specification (Page - 457) 16 sqmm ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | Nos | 2.43 | 2.43 | 256.0 | False | None | None | False | None | False | 622.08 | 0 | | 3536352 | 127431 | None | BWSSB SR 2023-24 Page - 127 Sl.No.-11.1 | Providing, Laying and Fixing of GI pipes conforming to IS 1239-1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For- Heavy Duty GI Pipe etc. complete. (Page - 178) Medium Duty GI pipe of 40mm dia - For Medium Duty GI pipe- ---- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges (Rates are inclusive of GST 18 percent) complete as per standard technical detailed specification and directions of the Engineer in charge of the work. | m | 593.12 | 593.12 | 10.0 | False | None | None | False | None | False | 5931.2 | 0 |
|
|
|---|