| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1721630325000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE BUILDING AT DODDA VADARAGUDI IN KR NAGARA TALUK, MYSURU DISTRICT. (Civil Works) | 5693179.07 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3575086 | 129960 | None | item no 1.12 PWD SR 2023 -2024 Vol 1 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including Cost of labour, tools, usage of machinery & other appurtenances required to complete the work. | Cum | 112.1 | 112.1 | 43.56 | False | None | None | False | None | False | 4883.076 | 0 | | 3575087 | 129960 | None | item no 1.14.1 PWD SR 2023 -2024 Vol 1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. | Cum | 120.36 | 120.36 | 163.79 | False | None | None | False | None | False | 19713.7644 | 0 | | 3575088 | 129960 | None | item no 2.1.4 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in
layers not exceeding 150 mm thickness, well compacted using plate vibrators,
including all lead & lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) | Cum | 7067.02 | 7067.02 | 34.57 | False | None | None | False | None | False | 244306.8814 | 0 | | 3575089 | 129960 | None | item no 2.2.1 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Foundation | Cum | 8012.15 | 8012.15 | 29.08 | False | None | None | False | None | False | 232993.322 | 0 | | 3575090 | 129960 | None | item no 2.2.1 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Pedestal | Cum | 12611.72 | 12611.72 | 3.94 | False | None | None | False | None | False | 49690.1768 | 0 | | 3575091 | 129960 | None | Item no.2.5.2 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inculded) Columns GF | Cum | 13727.06 | 13727.06 | 6.38 | False | None | None | False | None | False | 87578.6428 | 0 | | 3575092 | 129960 | None | Item no.2.5.2 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inculded) Columns FF | Cum | 13807.81 | 13807.81 | 4.34 | False | None | None | False | None | False | 59925.8954 | 0 | | 3575093 | 129960 | None | Item no.2.5.2 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inculded) Curtain wall | Cum | 8882.21 | 8882.21 | 5.21 | False | None | None | False | None | False | 46276.3141 | 0 | | 3575094 | 129960 | None | Item no.2.5.2 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inculded) Plinth Beams, Roof Slab, Staircase GF | Cum | 12112.11 | 12112.11 | 24.61 | False | None | None | False | None | False | 298079.0271 | 0 | | 3575095 | 129960 | None | Item no.2.5.2 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inculded) Roof Slab, Staircase FF | Cum | 12192.86 | 12192.86 | 8.01 | False | None | None | False | None | False | 97664.8086 | 0 | | 3575096 | 129960 | None | Item no.2.5.2 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inculded) Roof Beam, Lintel GF | Cum | 12919.58 | 12919.58 | 16.0 | False | None | None | False | None | False | 206713.28 | 0 | | 3575097 | 129960 | None | Item no.2.5.2 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inculded) Roof Beam, Lintel FF | Cum | 13000.33 | 13000.33 | 10.27 | False | None | None | False | None | False | 133513.3891 | 0 | | 3575098 | 129960 | None | Item no.2.5.2 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inculded) Chajja GF | Cum | 11708.37 | 11708.37 | 0.98 | False | None | None | False | None | False | 11474.2026 | 0 | | 3575099 | 129960 | None | Item no.2.5.2 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inculded) Chajja FF | Cum | 11789.12 | 11789.12 | 0.74 | False | None | None | False | None | False | 8723.9488 | 0 | | 3575100 | 129960 | None | item no 2.1.4 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in
layers not exceeding 150 mm thickness, well compacted using plate vibrators,
including all lead & lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inculded) GF | Cum | 11737.7 | 11737.7 | 0.23 | False | None | None | False | None | False | 2699.671 | 0 | | 3575101 | 129960 | None | item no 2.1.4 PWD SR 2023 -2024 Vol 1 | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in
layers not exceeding 150 mm thickness, well compacted using plate vibrators,
including all lead & lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inculded) FF | Cum | 11811.06 | 11811.06 | 0.18 | False | None | None | False | None | False | 2125.9908 | 0 | | 3575102 | 129960 | None | item no 2.11 PWD SR 2023 -2024 Vol 1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a) Building GF | Tonne | 105559.26 | 105559.26 | 6.33 | False | None | None | False | None | False | 668190.1158 | 0 | | 3575103 | 129960 | None | item no 2.11 PWD SR 2023 -2024 Vol 1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a) Building FF | Tonne | 106614.85 | 106614.85 | 2.04 | False | None | None | False | None | False | 217494.294 | 0 | | 3575104 | 129960 | None | item no 1.9 PWD SR 2023 -2024 Vol 1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 313.88 | 313.88 | 192.36 | False | None | None | False | None | False | 60377.9568 | 0 | | 3575105 | 129960 | None | item no 6.32 PWD SR 2023 -2024 Vol 2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF | Sqm | 1545.8 | 1545.8 | 199.0 | False | None | None | False | None | False | 307614.2 | 0 | | 3575106 | 129960 | None | item no 6.32 PWD SR 2023 -2024 Vol 2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF | Sqm | 1561.26 | 1561.26 | 170.33 | False | None | None | False | None | False | 265929.4158 | 0 | | 3575107 | 129960 | None | item no 6.34 PWD SR 2023 -2024 Vol 2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF | Sqm | 1302.72 | 1302.72 | 36.28 | False | None | None | False | None | False | 47262.6816 | 0 | | 3575108 | 129960 | None | item no 6.34 PWD SR 2023 -2024 Vol 2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF | Sqm | 1315.75 | 1315.75 | 53.77 | False | None | None | False | None | False | 70747.8775 | 0 | | 3575109 | 129960 | None | item no 12.13.1 PWD SR 2023 -2024 Vol 2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. GF | Cum | 116601.7 | 116601.7 | 0.32 | False | None | None | False | None | False | 37312.544 | 0 | | 3575110 | 129960 | None | item no 12.13.1 PWD SR 2023 -2024 Vol 2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. FF | Cum | 117767.72 | 117767.72 | 0.55 | False | None | None | False | None | False | 64772.246 | 0 | | 3575111 | 129960 | None | item no.12.51 PWD SR 2023 -2024 Vol 2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. GF | Nos | 1198.88 | 1198.88 | 8.0 | False | None | None | False | None | False | 9591.04 | 0 | | 3575112 | 129960 | None | item no.12.51 PWD SR 2023 -2024 Vol 2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. FF | Nos | 1210.87 | 1210.87 | 6.0 | False | None | None | False | None | False | 7265.22 | 0 | | 3575113 | 129960 | None | item no.12.57.6 PWD SR 2023 -2024 Vol 2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial GF | Sqm | 3919.96 | 3919.96 | 13.23 | False | None | None | False | None | False | 51861.0708 | 0 | | 3575114 | 129960 | None | item no.12.57.6 PWD SR 2023 -2024 Vol 2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial FF | Sqm | 3959.16 | 3959.16 | 17.64 | False | None | None | False | None | False | 69839.5824 | 0 | | 3575115 | 129960 | None | item no.12.90 PWD SR 2023 -2024 Vol 2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) GF | Sqm | 7946.12 | 7946.12 | 17.1 | False | None | None | False | None | False | 135878.652 | 0 | | 3575116 | 129960 | None | item no.12.90 PWD SR 2023 -2024 Vol 2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FF | Sqm | 8025.58 | 8025.58 | 9.72 | False | None | None | False | None | False | 78008.6376 | 0 | | 3575117 | 129960 | None | item no.12.85 PWD SR 2023 -2024 Vol 2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). GF | Sqm | 6748.42 | 6748.42 | 0.81 | False | None | None | False | None | False | 5466.2202 | 0 | | 3575118 | 129960 | None | item no.12.85 PWD SR 2023 -2024 Vol 2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). FF | Sqm | 6815.9 | 6815.9 | 0.72 | False | None | None | False | None | False | 4907.448 | 0 | | 3575119 | 129960 | None | item no.11.34A PWD SR 2023 -2024 Vol 2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding GF | Kgs | 198.24 | 198.24 | 272.16 | False | None | None | False | None | False | 53952.9984 | 0 | | 3575120 | 129960 | None | item no.11.34A PWD SR 2023 -2024 Vol 2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding FF | Kgs | 200.22 | 200.22 | 219.24 | False | None | None | False | None | False | 43896.2328 | 0 | | 3575121 | 129960 | None | item no.12.96 PWD SR 2023 -2024 Vol 2 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. GF | m | 758.74 | 758.74 | 12.83 | False | None | None | False | None | False | 9734.6342 | 0 | | 3575122 | 129960 | None | item no.12.96 PWD SR 2023 -2024 Vol 2 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. FF | m | 766.33 | 766.33 | 9.9 | False | None | None | False | None | False | 7586.667 | 0 | | 3575123 | 129960 | None | item no.12.97.1 PWD SR 2023 -2024 Vol 2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames GF | Sqm | 3780.72 | 3780.72 | 4.73 | False | None | None | False | None | False | 17882.8056 | 0 | | 3575124 | 129960 | None | item no.12.97.1 PWD SR 2023 -2024 Vol 2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames FF | Sqm | 3818.53 | 3818.53 | 3.15 | False | None | None | False | None | False | 12028.3695 | 0 | | 3575125 | 129960 | None | item no.12.59 PWD SR 2023 -2024 Vol 2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. GF | Nos | 1314.52 | 1314.52 | 8.0 | False | None | None | False | None | False | 10516.16 | 0 | | 3575126 | 129960 | None | item no.12.59 PWD SR 2023 -2024 Vol 2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. FF | Nos | 1327.67 | 1327.67 | 6.0 | False | None | None | False | None | False | 7966.02 | 0 | | 3575127 | 129960 | None | item no.12.60 PWD SR 2023 -2024 Vol 2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. GF | Nos | 1241.36 | 1241.36 | 8.0 | False | None | None | False | None | False | 9930.88 | 0 | | 3575128 | 129960 | None | item no.12.60 PWD SR 2023 -2024 Vol 2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. FF | Nos | 1253.77 | 1253.77 | 6.0 | False | None | None | False | None | False | 7522.62 | 0 | | 3575129 | 129960 | None | item no.12.61 PWD SR 2023 -2024 Vol 2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. Complete GF | Nos | 1168.2 | 1168.2 | 8.0 | False | None | None | False | None | False | 9345.6 | 0 | | 3575130 | 129960 | None | item no.12.61 PWD SR 2023 -2024 Vol 2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. Complete FF | Nos | 1179.88 | 1179.88 | 6.0 | False | None | None | False | None | False | 7079.28 | 0 | | 3575131 | 129960 | None | item no.12.62 PWD SR 2023 -2024 Vol 2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete GF | Nos | 279.66 | 279.66 | 14.0 | False | None | None | False | None | False | 3915.24 | 0 | | 3575132 | 129960 | None | item no.12.62 PWD SR 2023 -2024 Vol 2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete FF | Nos | 282.46 | 282.46 | 12.0 | False | None | None | False | None | False | 3389.52 | 0 | | 3575133 | 129960 | None | item no.12.63 PWD SR 2023 -2024 Vol 2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete GF | Nos | 153.4 | 153.4 | 14.0 | False | None | None | False | None | False | 2147.6 | 0 | | 3575134 | 129960 | None | item no.12.63 PWD SR 2023 -2024 Vol 2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete FF | Nos | 154.93 | 154.93 | 12.0 | False | None | None | False | None | False | 1859.16 | 0 | | 3575135 | 129960 | None | item no.12.64 PWD SR 2023 -2024 Vol 2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms GF | Nos | 64.9 | 64.9 | 8.0 | False | None | None | False | None | False | 519.2 | 0 | | 3575136 | 129960 | None | item no.12.64 PWD SR 2023 -2024 Vol 2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms FF | Nos | 65.55 | 65.55 | 6.0 | False | None | None | False | None | False | 393.3 | 0 | | 3575137 | 129960 | None | item no.12.75.1 PWD SR 2023 -2024 Vol 2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) GF | Nos | 324.5 | 324.5 | 16.0 | False | None | None | False | None | False | 5192.0 | 0 | | 3575138 | 129960 | None | item no.12.75.1 PWD SR 2023 -2024 Vol 2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) FF | Nos | 327.75 | 327.75 | 14.0 | False | None | None | False | None | False | 4588.5 | 0 | | 3575139 | 129960 | None | item no.10.6.3 PWD SR 2023 -2024 Vol 2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm GF | Each | 70.8 | 70.8 | 28.0 | False | None | None | False | None | False | 1982.4 | 0 | | 3575140 | 129960 | None | item no.10.6.3 PWD SR 2023 -2024 Vol 2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm FF | Each | 71.51 | 71.51 | 24.0 | False | None | None | False | None | False | 1716.24 | 0 | | 3575141 | 129960 | None | item no.11.35.2.1 PWD SR 2023 -2024 Vol 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to re- quired shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials,labour,usage charges of machinery complete as per specifications. GF | Kgs | 630.12 | 630.12 | 54.0 | False | None | None | False | None | False | 34026.48 | 0 | | 3575142 | 129960 | None | item no.11.36.1 PWD SR 2023 -2024 Vol 2 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge: Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including cost of materials, labour, usage charges of machinery complete as per specifications. GF | Sqm | 1058.46 | 1058.46 | 7.2 | False | None | None | False | None | False | 7620.912 | 0 | | 3575143 | 129960 | None | item no.11.37.1 PWD SR 2023 -2024 Vol 2 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. GF | Sqm | 1165.84 | 1165.84 | 7.2 | False | None | None | False | None | False | 8394.048 | 0 | | 3575144 | 129960 | None | item no.8.10 PWD SR 2023 -2024 Vol 2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF | Sqm | 248.98 | 248.98 | 113.14 | False | None | None | False | None | False | 28169.5972 | 0 | | 3575145 | 129960 | None | item no.8.10 PWD SR 2023 -2024 Vol 2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 251.47 | 251.47 | 68.77 | False | None | None | False | None | False | 17293.5919 | 0 | | 3575146 | 129960 | None | item no.8.8 PWD SR 2023 -2024 Vol 2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Inside) GF | Sqm | 437.78 | 437.78 | 337.93 | False | None | None | False | None | False | 147938.9954 | 0 | | 3575147 | 129960 | None | item no.8.8 PWD SR 2023 -2024 Vol 2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Inside) FF | Sqm | 442.16 | 442.16 | 248.36 | False | None | None | False | None | False | 109814.8576 | 0 | | 3575148 | 129960 | None | item no.8.6.2 PWD SR 2023 -2024 Vol 2 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per specifications and as per directions of Engineer-in-charge. GF | Sqm | 506.22 | 506.22 | 163.79 | False | None | None | False | None | False | 82913.7738 | 0 | | 3575149 | 129960 | None | item no.8.6.2 PWD SR 2023 -2024 Vol 2 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 511.28 | 511.28 | 209.6 | False | None | None | False | None | False | 107164.288 | 0 | | 3575150 | 129960 | None | item no.8.2.1 PWD SR 2023 -2024 Vol 2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF | Sqm | 348.1 | 348.1 | 39.84 | False | None | None | False | None | False | 13868.304 | 0 | | 3575151 | 129960 | None | item no.8.2.1 PWD SR 2023 -2024 Vol 2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 351.58 | 351.58 | 28.73 | False | None | None | False | None | False | 10100.8934 | 0 | | 3575152 | 129960 | None | item no.9.39 PWD SR 2023 -2024 Vol 2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. GF | Sqm | 1709.82 | 1709.82 | 39.84 | False | None | None | False | None | False | 68119.2288 | 0 | | 3575153 | 129960 | None | item no.9.39 PWD SR 2023 -2024 Vol 2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. FF | Sqm | 1726.92 | 1726.92 | 28.73 | False | None | None | False | None | False | 49614.4116 | 0 | | 3575154 | 129960 | None | item no.8.16.2 PWD SR 2023 -2024 Vol 2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster mesh 150mm wide GF | Rmtr | 44.84 | 44.84 | 225.6 | False | None | None | False | None | False | 10115.904 | 0 | | 3575155 | 129960 | None | item no.8.16.2 PWD SR 2023 -2024 Vol 2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster mesh 150mm wide FF | Rmtr | 45.29 | 45.29 | 451.2 | False | None | None | False | None | False | 20434.848 | 0 | | 3575156 | 129960 | None | item no.9.21.2 PWD SR 2023 -2024 Vol 2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. GF | Sqm | 1460.84 | 1460.84 | 68.34 | False | None | None | False | None | False | 99833.8056 | 0 | | 3575157 | 129960 | None | item no.9.21.2 PWD SR 2023 -2024 Vol 2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. FF | Sqm | 1475.45 | 1475.45 | 54.81 | False | None | None | False | None | False | 80869.4145 | 0 | | 3575158 | 129960 | None | item no 9.28 PWD SR 2023 -2024 Vol 2 | Providing and laying flooring and steps machine cut granite slabs 40mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. GF | Sqm | 5049.22 | 5049.22 | 16.02 | False | None | None | False | None | False | 80888.5044 | 0 | | 3575159 | 129960 | None | item no 9.9 PWD SR 2023 -2024 Vol 2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. GF | Sqm | 1269.68 | 1269.68 | 7.2 | False | None | None | False | None | False | 9141.696 | 0 | | 3575160 | 129960 | None | item no 9.9 PWD SR 2023 -2024 Vol 2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. FF | Sqm | 1282.38 | 1282.38 | 5.99 | False | None | None | False | None | False | 7681.4562 | 0 | | 3575161 | 129960 | None | item no 9.1 PWD SR 2023 -2024 Vol 2 | Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. GF | Sqm | 532.18 | 532.18 | 23.97 | False | None | None | False | None | False | 12756.3546 | 0 | | 3575162 | 129960 | None | item no 8.39 PWD SR 2023 -2024 Vol 2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF | Sqm | 149.86 | 149.86 | 564.21 | False | None | None | False | None | False | 84552.5106 | 0 | | 3575163 | 129960 | None | item no 8.39 PWD SR 2023 -2024 Vol 2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 151.36 | 151.36 | 385.9 | False | None | None | False | None | False | 58409.824 | 0 | | 3575164 | 129960 | None | item no 8.29 PWD SR 2023 -2024 Vol 2 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops. GF | Sqm | 333.94 | 333.94 | 163.79 | False | None | None | False | None | False | 54696.0326 | 0 | | 3575165 | 129960 | None | item no 8.29 PWD SR 2023 -2024 Vol 2 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops. FF | Sqm | 337.28 | 337.28 | 209.6 | False | None | None | False | None | False | 70693.888 | 0 | | 3575166 | 129960 | None | item no 8.40 PWD SR 2023 -2024 Vol 2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF | Sqm | 135.7 | 135.7 | 17.91 | False | None | None | False | None | False | 2430.387 | 0 | | 3575167 | 129960 | None | item no 8.40 PWD SR 2023 -2024 Vol 2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 137.06 | 137.06 | 15.21 | False | None | None | False | None | False | 2084.6826 | 0 | | 3575168 | 129960 | None | item no 8.34.1 PWD SR 2023 -2024 Vol 2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF | Sqm | 62.54 | 62.54 | 52.71 | False | None | None | False | None | False | 3296.4834 | 0 | | 3575169 | 129960 | None | item no 8.34.1 PWD SR 2023 -2024 Vol 2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 63.17 | 63.17 | 48.39 | False | None | None | False | None | False | 3056.7963 | 0 | | 3575170 | 129960 | None | item no 8.38 PWD SR 2023 -2024 Vol 2 | Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF | Sqm | 47.2 | 47.2 | 52.71 | False | None | None | False | None | False | 2487.912 | 0 | | 3575171 | 129960 | None | item no 8.38 PWD SR 2023 -2024 Vol 2 | Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF | Sqm | 47.67 | 47.67 | 48.39 | False | None | None | False | None | False | 2306.7513 | 0 | | 3575172 | 129960 | None | item no 9.24 PWD SR 2023 -2024 Vol 2 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent GF | Sqm | 3365.36 | 3365.36 | 55.23 | False | None | None | False | None | False | 185868.8328 | 0 | | 3575173 | 129960 | None | item no 9.40 PWD SR 2023 -2024 Vol 2 | Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification. GF | Sqm | 1099.76 | 1099.76 | 9.0 | False | None | None | False | None | False | 9897.84 | 0 | | 3575174 | 129960 | None | item no 11.26.3 PWD SR 2023 -2024 Vol 2 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-charge. GF | Kgs | 215.94 | 215.94 | 363.9 | False | None | None | False | None | False | 78580.566 | 0 | | 3575175 | 129960 | None | item no 11.26.3 PWD SR 2023 -2024 Vol 2 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-charge. FF | Kgs | 218.1 | 218.1 | 124.5 | False | None | None | False | None | False | 27153.45 | 0 | | 3575176 | 129960 | None | item no. 20.79 PWD SR 2023-2024 Vol 2 | Supplying and fixing new teak wood beads wherever necessary including
cost of materials, labour, complete as per specifications. FF | Mtr | 61.98 | 61.98 | 35.1 | False | None | None | False | None | False | 2175.498 | 0 | | 3575177 | 129960 | None | item no. 9.20.2 PWD SR 2023 -2024 Vol 2 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer-in-charge Size of Tile 600x600 mm FF | Sqm | 249.09 | 249.09 | 54.81 | False | None | None | False | None | False | 13652.6229 | 0 | | 3575178 | 129960 | None | item no. 10.1.2 PWD SR 2023 -2024 Vol 2 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent FF | Sqm | 4692.12 | 4692.12 | 16.23 | False | None | None | False | None | False | 76153.1076 | 0 | | 3575179 | 129960 | None | item no. 7.38 PWD SR 2023 -2024 Vol 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. FF | Sqm | 676.94 | 676.94 | 72.0 | False | None | None | False | None | False | 48739.68 | 0 | | 3575180 | 129960 | None | item no. 7.39.6 PWD SR 2023 -2024 Vol 2 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter (600 mm over all girth) FF | m | 1279.99 | 1279.99 | 18.0 | False | None | None | False | None | False | 23039.82 | 0 | | 3575181 | 129960 | None | item no. 11.16.2 PWD SR 2023 -2024 Vol 2 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. FF | Kgs | 175.19 | 175.19 | 600.0 | False | None | None | False | None | False | 105114.0 | 0 |
| | 1721630325000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE BUILDING AT DODDA VADARAGUDI IN KR NAGARA TALUK, MYSURU DISTRICT. (Water Supply & Sanitary Works) | 312761.36 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3575182 | 129961 | None | I- 13.32.3 PWD SR 2023-2024 Vol-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25mm Dia | m | 562.86 | 562.86 | 60.0 | False | None | None | False | None | False | 33771.6 | 0 | | 3575183 | 129961 | None | I-13.32.4 PWD SR 2023-2024 Vol-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm Dia | m | 657.26 | 657.26 | 50.0 | False | None | None | False | None | False | 32863.0 | 0 | | 3575184 | 129961 | None | item no : 13.2.2 PWD SR 2023-2024 Vol-2 | Providing and fixing brass bib cock of approved quality :20 mm nominal bore | Nos | 359.9 | 359.9 | 12.0 | False | None | None | False | None | False | 4318.8 | 0 | | 3575185 | 129961 | None | item no : 13.4.1 PWD SR 2023-2024 Vol-2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore | Nos | 647.82 | 647.82 | 6.0 | False | None | None | False | None | False | 3886.92 | 0 | | 3575186 | 129961 | None | item no : 13.4.2 PWD SR 2023-2024 Vol-2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore | Nos | 705.64 | 705.64 | 6.0 | False | None | None | False | None | False | 4233.84 | 0 | | 3575187 | 129961 | None | item no : 14.7.2 PWD SR 2023-2024 Vol-2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever eequire:White Vitreous China Wash basin size 630x450 mm with a single 15
mm C.P. brass pillar tap | Each | 3021.98 | 3021.98 | 8.0 | False | None | None | False | None | False | 24175.84 | 0 | | 3575188 | 129961 | None | item no : 14.5.1 PWD SR 2023-2024 Vol-2 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Each | 10197.56 | 10197.56 | 1.0 | False | None | None | False | None | False | 10197.56 | 0 | | 3575189 | 129961 | None | item no : 14.7.3 PWD SR 2023-2024 Vol-2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | Each | 3381.88 | 3381.88 | 5.0 | False | None | None | False | None | False | 16909.4 | 0 | | 3575190 | 129961 | None | item no : 14.9.1 PWD SR 2023-2024 Vol-2 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm. | Each | 3517.58 | 3517.58 | 1.0 | False | None | None | False | None | False | 3517.58 | 0 | | 3575191 | 129961 | None | item no : 14.27.2 PWD SR 2023-2024 Vol-2 | Providing and fixing white vitreous china laboratory sink including making all connections including cost of fittings Size 600x450x200 mm | Each | 3919.96 | 3919.96 | 1.0 | False | None | None | False | None | False | 3919.96 | 0 | | 3575192 | 129961 | None | item no : 14.28.1.2 PWD SR 2023-2024 Vol-2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:Semi rigid pipe:40mm dia | Each | 103.84 | 103.84 | 5.0 | False | None | None | False | None | False | 519.2 | 0 | | 3575193 | 129961 | None | item no : 14.40.2 PWD SR 2023-2024 Vol-2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g | Each | 585.28 | 585.28 | 5.0 | False | None | None | False | None | False | 2926.4 | 0 | | 3575194 | 129961 | None | item no : 14.32.2 PWD SR 2023-2024 Vol-2 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm | Each | 1201.24 | 1201.24 | 5.0 | False | None | None | False | None | False | 6006.2 | 0 | | 3575195 | 129961 | None | item no : 14.1.1 PWD SR 2023-2024 Vol-2 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. | Each | 5763.12 | 5763.12 | 4.0 | False | None | None | False | None | False | 23052.48 | 0 | | 3575196 | 129961 | None | item no : 14.3.1 PWD SR 2023-2024 Vol-2 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid. | Each | 7052.86 | 7052.86 | 1.0 | False | None | None | False | None | False | 7052.86 | 0 | | 3575197 | 129961 | None | item no : 13.42 PWD SR 2023-2024 Vol-2 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
* 100 mm inlet and 100 mm outlet * Sand Cast Iron S&S as per IS: 1729 | Each | 1351.1 | 1351.1 | 2.0 | False | None | None | False | None | False | 2702.2 | 0 | | 3575198 | 129961 | None | item no : 13.48 PWD SR 2023-2024 Vol-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter. | Rmtr | 343.38 | 343.38 | 110.0 | False | None | None | False | None | False | 37771.8 | 0 | | 3575199 | 129961 | None | item no : 1.6.1 PWD SR 2023-2024 Vol-1 | Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50 m. | Cum | 571.12 | 571.12 | 23.0 | False | None | None | False | None | False | 13135.76 | 0 | | 3575200 | 129961 | None | item no : 2.1.3 PWD SR 2023-2024 Vol-1 | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in
layers not exceeding 150 mm thickness, well compacted using plate vibrators,
including all lead & lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) | Cum | 7067.02 | 7067.02 | 1.0 | False | None | None | False | None | False | 7067.02 | 0 | | 3575201 | 129961 | None | item no : 5.7 PWD SR 2023-2024 Vol-2 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6. | Cum | 7970.9 | 7970.9 | 1.0 | False | None | None | False | None | False | 7970.9 | 0 | | 3575202 | 129961 | None | item no :2.1.4 PWD SR 2023-2024 Vol-2 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. | Cum | 7336.06 | 7336.06 | 1.0 | False | None | None | False | None | False | 7336.06 | 0 | | 3575203 | 129961 | None | item no :8.7 PWD SR 2023-2024 Vol-2 | Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 431.88 | 431.88 | 9.0 | False | None | None | False | None | False | 3886.92 | 0 | | 3575204 | 129961 | None | item no :1.10 PWD SR 2023-2024 Vol-1 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications | Cum | 188.8 | 188.8 | 8.0 | False | None | None | False | None | False | 1510.4 | 0 | | 3575205 | 129961 | None | item no : 13.36 PWD SR 2023-2024 Vol-1 | Cutting holes upto 30X30cm in walls including making good the same with common burnt clay F.P.S (non modular) bricks. | Each | 381.14 | 381.14 | 25.0 | False | None | None | False | None | False | 9528.5 | 0 | | 3575206 | 129961 | None | item no : 13.37 PWD SR 2023-2024 Vol-2 | Cutting holes upto 15X15cm in RCC floors and roofs for passing drain pipe etc.,and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size)including finishing complete so as to make it leak proof. | m | 369.34 | 369.34 | 10.0 | False | None | None | False | None | False | 3693.4 | 0 | | 3575207 | 129961 | None | item no : 13.22.2 PWD SR 2023-2024 Vol-2 | Providing and fixing PTMT grating of approved quality and colour, Rectangular type with openable circular lid. | Nos | 238.36 | 238.36 | 5.0 | False | None | None | False | None | False | 1191.8 | 0 | | 3575208 | 129961 | None | item no : 13.23.1 PWD SR 2023-2024 Vol-2 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball 15 mm nominal bore, 105 mm long, weighing not less than 138 g | Nos | 241.9 | 241.9 | 1.0 | False | None | None | False | None | False | 241.9 | 0 | | 3575209 | 129961 | None | item no : 13.15 PWD SR 2023-2024 Vol-2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 | Nos | 855.5 | 855.5 | 1.0 | False | None | None | False | None | False | 855.5 | 0 | | 3575210 | 129961 | None | item no : 13.16 PWD SR 2023-2024 Vol-2 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 | Nos | 731.6 | 731.6 | 4.0 | False | None | None | False | None | False | 2926.4 | 0 | | 3575211 | 129961 | None | I.no.13.34 PWD SR 2023-2024 Vol-2 | Providing and placing on terrace(at all floor levels), polyethylene water storage tank,IS:120701 marked,with cover and suitable locking arrangements, and making necessary holes for inlet, outlet and over flow pipes, but without fittings and the base support for tank. | l | 10.62 | 10.62 | 2000.0 | False | None | None | False | None | False | 21240.0 | 0 | | 3575212 | 129961 | None | A.R | Providing & fixing 1 HP Mono block pump of approved make with all accessories etc.., complete including cost of materials, labour as per specifications.& as per the direction of the Engineer - in - charge | Each | 8260.0 | 8260.0 | 1.0 | False | None | None | False | None | False | 8260.0 | 0 | | 3575213 | 129961 | None | I.no.13.39 PWD SR 2023-2024 Vol-2 | Providing and fixing square mouth S.W.gully trap class SP-1 complete with C.I.grating,brick masonry camber 150X 100 mm size P type with non modular bcommon burnt clay bricks of designation 3.5 & with water tight.C.I cover with frame of 300X300 mm size (inside)the weight of the cover to be not less than 4.50kg and frame to be not less than 2.70kg as per standard design | Each | 3045.58 | 3045.58 | 2.0 | False | None | None | False | None | False | 6091.16 | 0 |
| | 1721630325000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE BUILDING AT DODDA VADARAGUDI IN KR NAGARA TALUK, MYSURU DISTRICT. (Electrical Works) | 405700.76 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3575214 | 129962 | None | 2.1.1 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch | Point | 336.3 | 336.3 | 25.0 | False | None | None | False | None | False | 8407.5 | 0 | | 3575215 | 129962 | None | 2.1.2 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch | Point | 464.92 | 464.92 | 15.0 | False | None | None | False | None | False | 6973.8 | 0 | | 3575216 | 129962 | None | 2.1.3 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch | Point | 672.6 | 672.6 | 10.0 | False | None | None | False | None | False | 6726.0 | 0 | | 3575217 | 129962 | None | 3.4.1 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-2 Way | Each | 162.84 | 162.84 | 21.0 | False | None | None | False | None | False | 3419.64 | 0 | | 3575218 | 129962 | None | 3.4.3 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5Way | Each | 208.86 | 208.86 | 6.0 | False | None | None | False | None | False | 1253.16 | 0 | | 3575219 | 129962 | None | 3.4.4 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6Way | Each | 259.6 | 259.6 | 2.0 | False | None | None | False | None | False | 519.2 | 0 | | 3575220 | 129962 | None | 3.4.5 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 Way | Each | 307.98 | 307.98 | 13.0 | False | None | None | False | None | False | 4003.74 | 0 | | 3575221 | 129962 | None | 3.4.6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12Way | Each | 376.42 | 376.42 | 4.0 | False | None | None | False | None | False | 1505.68 | 0 | | 3575222 | 129962 | None | 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module | Each | 161.66 | 161.66 | 21.0 | False | None | None | False | None | False | 3394.86 | 0 | | 3575223 | 129962 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module | Each | 206.5 | 206.5 | 6.0 | False | None | None | False | None | False | 1239.0 | 0 | | 3575224 | 129962 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module | Each | 276.12 | 276.12 | 2.0 | False | None | None | False | None | False | 552.24 | 0 | | 3575225 | 129962 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Way | Each | 335.12 | 335.12 | 13.0 | False | None | None | False | None | False | 4356.56 | 0 | | 3575226 | 129962 | None | 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12Way | Each | 405.92 | 405.92 | 4.0 | False | None | None | False | None | False | 1623.68 | 0 | | 3575227 | 129962 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch | Each | 120.36 | 120.36 | 102.0 | False | None | None | False | None | False | 12276.72 | 0 | | 3575228 | 129962 | None | 3.6.2 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch | Each | 195.88 | 195.88 | 6.0 | False | None | None | False | None | False | 1175.28 | 0 | | 3575229 | 129962 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket | Each | 201.78 | 201.78 | 37.0 | False | None | None | False | None | False | 7465.86 | 0 | | 3575230 | 129962 | None | 3.6.8 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push | Each | 208.86 | 208.86 | 2.0 | False | None | None | False | None | False | 417.72 | 0 | | 3575231 | 129962 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module | Each | 421.26 | 421.26 | 12.0 | False | None | None | False | None | False | 5055.12 | 0 | | 3575232 | 129962 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch | Each | 384.68 | 384.68 | 11.0 | False | None | None | False | None | False | 4231.48 | 0 | | 3575233 | 129962 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket | Each | 278.48 | 278.48 | 11.0 | False | None | None | False | None | False | 3063.28 | 0 | | 3575234 | 129962 | None | 3.6.11 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket | Each | 184.08 | 184.08 | 3.0 | False | None | None | False | None | False | 552.24 | 0 | | 3575235 | 129962 | None | 12.2.1 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell | Each | 290.28 | 290.28 | 2.0 | False | None | None | False | None | False | 580.56 | 0 | | 3575236 | 129962 | None | 12.2.2 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Musical | No | 512.12 | 512.12 | 12.0 | False | None | None | False | None | False | 6145.44 | 0 | | 3575237 | 129962 | None | 1.2.1 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick | m | 77.88 | 77.88 | 220.0 | False | None | None | False | None | False | 17133.6 | 0 | | 3575238 | 129962 | None | 1.2.2 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick | m | 92.04 | 92.04 | 180.0 | False | None | None | False | None | False | 16567.2 | 0 | | 3575239 | 129962 | None | 1.3.1 | Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick | m | 80.24 | 80.24 | 120.0 | False | None | None | False | None | False | 9628.8 | 0 | | 3575240 | 129962 | None | 1.3.2 | Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick | m | 93.22 | 93.22 | 100.0 | False | None | None | False | None | False | 9322.0 | 0 | | 3575241 | 129962 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 1.5 sqmm | m | 30.68 | 30.68 | 200.0 | False | None | None | False | None | False | 6136.0 | 0 | | 3575242 | 129962 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 2.5 sqmm | m | 49.56 | 49.56 | 400.0 | False | None | None | False | None | False | 19824.0 | 0 | | 3575243 | 129962 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 4 sqmm | m | 74.34 | 74.34 | 100.0 | False | None | None | False | None | False | 7434.0 | 0 | | 3575244 | 129962 | None | 5.19.9 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure. II- Double Door 12 Way SP & N | Each | 2748.22 | 2748.22 | 2.0 | False | None | None | False | None | False | 5496.44 | 0 | | 3575245 | 129962 | None | 5.18.1 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps SP | Each | 489.7 | 489.7 | 20.0 | False | None | None | False | None | False | 9794.0 | 0 | | 3575246 | 129962 | None | 5.20.1 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board 16-25 Amps 2 pole | Each | 5046.86 | 5046.86 | 2.0 | False | None | None | False | None | False | 10093.72 | 0 | | 3575247 | 129962 | None | I-32.03 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 10 sqmm | Km | 139244.72 | 139244.72 | 0.05 | False | None | None | False | None | False | 6962.236 | 0 | | 3575248 | 129962 | None | I-29.03 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. In soil (hard) | Cum | 459.02 | 459.02 | 20.0 | False | None | None | False | None | False | 9180.4 | 0 | | 3575249 | 129962 | None | I-54.01 | Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified | No | 2562.96 | 2562.96 | 4.0 | False | None | None | False | None | False | 10251.84 | 0 | | 3575250 | 129962 | None | I-51.02 | Good Quality well burnt Charcoal for grounding
purposes packed in non returnable gunny bag of 30 Kg
each | No | 797.68 | 797.68 | 4.0 | False | None | None | False | None | False | 3190.72 | 0 | | 3575251 | 129962 | None | I-51.03 | Good Quality Salt for grounding purposes packed in 50
Kg gunny bag | Bag | 365.8 | 365.8 | 2.0 | False | None | None | False | None | False | 731.6 | 0 | | 3575252 | 129962 | None | I-51.01 | GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,
3.2 mm thick with bolt, nut, GI Strips and washer
complete Minimum Weight of GI Pipe: 7.3 Kg | No | 876.74 | 876.74 | 4.0 | False | None | None | False | None | False | 3506.96 | 0 | | 3575253 | 129962 | None | 11.3.2 | Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w | Each | 814.2 | 814.2 | 26.0 | False | None | None | False | None | False | 21169.2 | 0 | | 3575254 | 129962 | None | 11.5.2 | Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W | Each | 1044.3 | 1044.3 | 2.0 | False | None | None | False | None | False | 2088.6 | 0 | | 3575255 | 129962 | None | 11.11.3 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K | Each | 175.82 | 175.82 | 5.0 | False | None | None | False | None | False | 879.1 | 0 | | 3575256 | 129962 | None | 11.11.7 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K | Each | 502.68 | 502.68 | 12.0 | False | None | None | False | None | False | 6032.16 | 0 | | 3575257 | 129962 | None | 11.8.2 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than 130lm/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts | No | 4748.32 | 4748.32 | 2.0 | False | None | None | False | None | False | 9496.64 | 0 | | 3575258 | 129962 | None | I-12.27 | Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply | No | 61.36 | 61.36 | 2.0 | False | None | None | False | None | False | 122.72 | 0 | | 3575259 | 129962 | None | I-6.1 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. | Each | 1760.56 | 1760.56 | 5.0 | False | None | None | False | None | False | 8802.8 | 0 | | 3575260 | 129962 | None | 6.3.1 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model | Each | 3521.12 | 3521.12 | 12.0 | False | None | None | False | None | False | 42253.44 | 0 | | 3575261 | 129962 | None | I-12.46 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin | Each | 74.34 | 74.34 | 19.0 | False | None | None | False | None | False | 1412.46 | 0 | | 3575262 | 129962 | None | 13.7.1 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders | Each | 143.96 | 143.96 | 28.0 | False | None | None | False | None | False | 4030.88 | 0 | | 3575263 | 129962 | None | I-13.1 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. | Each | 201.78 | 201.78 | 12.0 | False | None | None | False | None | False | 2421.36 | 0 | | 3575264 | 129962 | None | I-13.13 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. | Each | 834.26 | 834.26 | 5.0 | False | None | None | False | None | False | 4171.3 | 0 | | 3575265 | 129962 | None | 13.4.1 | Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length | Each | 1723.98 | 1723.98 | 2.0 | False | None | None | False | None | False | 3447.96 | 0 | | 3575266 | 129962 | None | I-13.5 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. | Each | 191.16 | 191.16 | 2.0 | False | None | None | False | None | False | 382.32 | 0 | | 3575267 | 129962 | None | 7.1.3 | Supplying ...litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. 25Litres | Each | 12085.56 | 12085.56 | 1.0 | False | None | None | False | None | False | 12085.56 | 0 | | 3575268 | 129962 | None | 5.42.1 | Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 14SWG | Sq CM | 0.59 | 0.59 | 25000.0 | False | None | None | False | None | False | 14750.0 | 0 | | 3575269 | 129962 | None | 5.41.1 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm | m | 359.9 | 359.9 | 3.0 | False | None | None | False | None | False | 1079.7 | 0 | | 3575270 | 129962 | None | 5.41.4 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel | m | 892.08 | 892.08 | 3.0 | False | None | None | False | None | False | 2676.24 | 0 | | 3575271 | 129962 | None | 5.14.7 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nut necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for
Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for
segregating Priority and Non-Priority loads must be available in the
MCCB. MCCB shall be provided with double insulation (insulation
between front cover and internal power circuits to avoid any accidental
contact with live current carrying path with the front cover open).
Multi-pole breakers shall be designed to break all the poles
simultaneously and they shall have a single mechanism FOUR POLE 100Amps 25kA | Each | 10014.66 | 10014.66 | 1.0 | False | None | None | False | None | False | 10014.66 | 0 | | 3575272 | 129962 | None | 5.18.4 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP | Each | 872.02 | 872.02 | 3.0 | False | None | None | False | None | False | 2616.06 | 0 | | 3575273 | 129962 | None | 5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN | Each | 3643.84 | 3643.84 | 1.0 | False | None | None | False | None | False | 3643.84 | 0 | | 3575274 | 129962 | None | 5.7.2 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32Amps | Each | 284.38 | 284.38 | 3.0 | False | None | None | False | None | False | 853.14 | 0 | | 3575275 | 129962 | None | 5.7.3 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 63Amps | Each | 473.18 | 473.18 | 1.0 | False | None | None | False | None | False | 473.18 | 0 | | 3575276 | 129962 | None | 5.12.1 | Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 63Amps | Each | 8119.58 | 8119.58 | 1.0 | False | None | None | False | None | False | 8119.58 | 0 | | 3575277 | 129962 | None | I-5.27 | Supplying, fixing and wiring rotary selector switch suitable for Ammeter | Each | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 | | 3575278 | 129962 | None | I-5.28 | Supplying, fixing and wiring rotary selector switch suitable for Voltmeter | Each | 188.8 | 188.8 | 1.0 | False | None | None | False | None | False | 188.8 | 0 | | 3575279 | 129962 | None | I-5.29 | Supplying, fixing and wiring 3 Phase Digital Ammeter | Each | 1681.5 | 1681.5 | 2.0 | False | None | None | False | None | False | 3363.0 | 0 | | 3575280 | 129962 | None | I-5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C. | Each | 607.7 | 607.7 | 3.0 | False | None | None | False | None | False | 1823.1 | 0 | | 3575281 | 129962 | None | I-5.34 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound (48/6.32) | Each | 663.16 | 663.16 | 3.0 | False | None | None | False | None | False | 1989.48 | 0 | | 3575282 | 129962 | None | I-5.30 | Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter | Each | 1628.4 | 1628.4 | 3.0 | False | None | None | False | None | False | 4885.2 | 0 |
|
|
|---|