createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1720441509010 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1620.00 emd 64800.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 30-07-2024 16:00:00 tenderQueryClose 26-07-2024 16:00:00 technicalBidOpen 31-07-2024 16:30:00 publishedDate 23-07-2024 14:09:14 publishedByPost EWHFWD_EE_EEOFF_KLB publishedByUser KPE14208 - MANIK S KANKATTE bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Khaja sab splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9449843366 tenderSupplierList None
tenderSchedule	createdTs 1720441509035 version 5 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT452 title CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT TARKASPETA IN CHITTAPUR TALUKA OF KALABURAGI DISTRICT description CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT TARKASPETA IN CHITTAPUR TALUKA OF KALABURAGI DISTRICT. category WORKS categoryText Works ecv 6472174.60 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3525 locationName EWHFWD Executive Engineer Office Kalburagi provisionalAmount 6500000.0 groupOverheadTotal 0.0 fileNumber EWHFWD/2023-24/BD/HWC/TARKASPETA
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1720441509000 0 None None Buildings Civil works - Ground Floor 4113889.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3484907 124568 None Vol - III, P. no. 9, it. No. 2.5.ii.a Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sq 4.86 4.86 750.0 False None None False None False 3645.0 0 3484908 124568 None Vol - I, P. no. 8, It. No. 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 117.71 117.71 75.0 False None None False None False 8828.25 0 3484909 124568 None Vol - I, P. no. 8, It. No. 1.14 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 126.38 126.38 221.3 False None None False None False 27967.894 0 3484910 124568 None Vol - I, P. no. 15, It. No. 2.1.3, Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 7420.37 7420.37 24.52 False None None False None False 181947.4724 0 3484911 124568 None Vol - I, P. no. 15, It. No. 2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Footings,Pedestal,Screed concrete over slab ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 7789.59 7789.59 37.57 False None None False None False 292654.8963 0 3484912 124568 None Vol - I, P. no. 7, It. No. 1.9 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 0cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 329.57 329.57 177.04 False None None False None False 58347.0728 0 3484913 124568 None Vol - I, P. no. 7, It. No. 1.8 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 587.29 587.29 198.61 False None None False None False 116641.6669 0 3484914 124568 None Vol - II, P. no. 9, It. No. 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 6952.03 6952.03 7.2 False None None False None False 50054.616 0 3484915 124568 None Vol - II, P. no. 9, It. No. 5.3 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 7688.0 7688.0 5.4 False None None False None False 41515.2 0 3484916 124568 None Vol - I, P. no. 16, It. No. 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 8478.48 8478.48 44.67 False None None False None False 378733.7016 0 3484917 124568 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Footings Pedestal ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 623.17 623.17 29.44 False None None False None False 18346.1248 0 3484918 124568 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. COLUMNS ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 5934.93 5934.93 9.18 False None None False None False 54482.6574 0 3484919 124568 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. PLINTH BEAM,Columns embedded in Plinth Beam ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 4239.24 4239.24 8.86 False None None False None False 37559.6664 0 3484920 124568 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. LINTELS ROOF BEAM CONCRETE ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 5087.09 5087.09 12.29 False None None False None False 62520.3361 0 3484921 124568 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. ROOF SLAB ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 4239.24 4239.24 14.08 False None None False None False 59688.4992 0 3484922 124568 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Chajja ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 3815.31 3815.31 1.03 False None None False None False 3929.7693 0 3484923 124568 None Vol - I, P. no. 15, It. No. 2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cill Concrete ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 7735.08 7735.08 1.69 False None None False None False 13072.2852 0 3484924 124568 None Vol - 1, P. no.18, It. No. 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- Complete as per Specification and as directed by the Engineer in-charge of work t 110837.22 110837.22 8.55 False None None False None False 947658.231 0 3484925 124568 None Vol - II, P. No. 14, It. No. 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Ground Floor Wall - Upto Slab Beam Bottom ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 9873.59 9873.59 37.38 False None None False None False 369074.7942 0 3484926 124568 None Vol - II, P. No. 14, It. No. 6.13 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 1209.26 1209.26 35.55 False None None False None False 42989.193 0 3484927 124568 None Vol - II, P. No. 100, It. No. 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 122431.79 122431.79 0.45 False None None False None False 55094.3055 0 3484928 124568 None Vol - II, P. No. 104, It. No. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 1258.82 1258.82 4.0 False None None False None False 5035.28 0 3484929 124568 None Vol - II, P. No. 219, It. No. 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Aldrop 16mm dia, 300mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 464.63 464.63 4.0 False None None False None False 1858.52 0 3484930 124568 None Vol - II, P. No. 219, It. No. 22.15.1 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 557.55 557.55 8.0 False None None False None False 4460.4 0 3484931 124568 None Vol - II, P. No. 219, It. No. 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 185.85 185.85 4.0 False None None False None False 743.4 0 3484932 124568 None Vol - II, P. No. 219, It. No. 22.15.8 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS hinges 125 mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 61.95 61.95 16.0 False None None False None False 991.2 0 3484933 124568 None Vol - II, P. No. 69, It. No. 10.6.2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 68.15 68.15 12.0 False None None False None False 817.8 0 3484934 124568 None Vol - II, P. No. 205, It. No. 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 64.43 64.43 24.0 False None None False None False 1546.32 0 3484935 124568 None Vol - II, P. No. 105, It. No. 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 4115.96 4115.96 15.36 False None None False None False 63221.1456 0 3484936 124568 None Vol - II, P. No. 110, It. No. 12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 8116.69 8116.69 9.84 False None None False None False 79868.2296 0 3484937 124568 None Vol - II, P. No. 109, It. No. 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 7085.84 7085.84 0.72 False None None False None False 5101.8048 0 3484938 124568 None Vol - II, P. No. 85, It. No. 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Complete as per Specification and as directed by the Engineer in-charge of work Kg 208.15 208.15 206.64 False None None False None False 43012.116 0 3484939 124568 None Vol - II, P. No. 111, It. No. 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) - Size 62 x 100mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 869.78 869.78 9.8 False None None False None False 8523.844 0 3484940 124568 None Vol - II, P. No. 112, It. No. 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) - 30 mm thickness ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 4317.92 4317.92 3.15 False None None False None False 13601.448 0 3484941 124568 None Vol - II, P. No. 42, It. No. 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 432.41 432.41 241.84 False None None False None False 104574.0344 0 3484942 124568 None Vol - II, P. No. 43, It. No. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 261.43 261.43 93.2 False None None False None False 24365.276 0 3484943 124568 None Vol - II, P. No. 50, It. No. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 123.9 123.9 335.04 False None None False None False 41511.456 0 3484944 124568 None Vol - II, P. No. 42, It. No. 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (outside) ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 459.67 459.67 163.75 False None None False None False 75270.9625 0 3484945 124568 None Vol - II, P. No. 43, It. No. 8.16.1 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 42.13 42.13 676.2 False None None False None False 28488.306 0 3484946 124568 None Vol - II, P. No. 54, It. No. 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 64.43 64.43 271.01 False None None False None False 17461.1743 0 3484947 124568 None Vol - II, P. No. 60, It. No. 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 1418.66 1418.66 56.4 False None None False None False 80012.424 0 3484948 124568 None Vol - II, P. No. 40, It. No. 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 345.68 345.68 67.22 False None None False None False 23236.6096 0 3484949 124568 None Vol - II, P. No. 60, It. No. 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 1101.47 1101.47 5.98 False None None False None False 6586.7906 0 3484950 124568 None Vol - II, P. No. 64, It. No. 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 1795.31 1795.31 67.22 False None None False None False 120680.7382 0 3484951 124568 None Vol - II, P. No. 48, It. No. 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 157.35 157.35 335.04 False None None False None False 52718.544 0 3484952 124568 None Vol - II, P. No. 46, It. No. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 220.54 220.54 163.75 False None None False None False 36113.425 0 3484953 124568 None Vol - II, P. No. 48, It. No. 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 142.49 142.49 62.22 False None None False None False 8865.7278 0 3484954 124568 None Vol - II, P. No. 48, It. No. 8.38 Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 49.56 49.56 25.2 False None None False None False 1248.912 0 3484955 124568 None Vol - II, P. No. 48, It. No. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 3533.63 3533.63 51.69 False None None False None False 182653.3347 0 3484956 124568 None Vol - II, P. No. 48, It. No. 9.24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Kg 700.04 700.04 234.0 False None None False None False 163809.36 0 3484957 124568 None Vol - II, P. No. 87, It. No. 11.35.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. ---- Complete as per Specification and as directed by the Engineer in-charge of work Kg 560.03 560.03 88.2 False None None False None False 49394.646 0 3484958 124568 None LUMPSUM The Tenderer (agency) should arrange to obtain (get), detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration and providing consultancy for Architectural designs & drawings, elevation, 3D view, Internal and External Electrical services including electrical infrastructure , Lifts, CCTV/Net working system interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project (This item is included in schedule B as a item) and 6 sets of as built drawings should be submitted to the employer. The Consultancy Fees which is included as an item in schedule B shall be paid on prorate basis of the main work or by negotiation with the employer. - - - - etc., complete with all lead and lift as per detailed specification and directions of the Engineer incharge ---- Complete as per Specification and as directed by the Engineer in-charge of work Lump Sum for Each 43365.0 43365.0 1.0 False None None False None False 43365.0 0 1720441509000 0 None None Buildings Civil works - First Floor 1723935.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3484959 124569 None Vol - I, P. no. 16, It. No. 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 8559.22 8559.22 20.89 False None None False None False 178802.1058 0 3484960 124569 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work FIRST FLOOR COLUMNS PARAPET COLUMNS ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 5991.46 5991.46 3.47 False None None False None False 20790.3662 0 3484961 124569 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Lintel Concrete FIRST FLOOR ROOF BEAM CONCRETE ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 5135.53 5135.53 5.85 False None None False None False 30042.8505 0 3484962 124569 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. ROOF SLAB ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 4279.61 4279.61 18.49 False None None False None False 79129.9889 0 3484963 124569 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Chajja ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 3851.65 3851.65 0.26 False None None False None False 1001.429 0 3484964 124569 None Vol - I, P. no. 15, It. No. 2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 7808.74 7808.74 1.69 False None None False None False 13196.7706 0 3484965 124569 None Vol - 1, P. no.18, It. No. 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- Complete as per Specification and as directed by the Engineer in-charge of work t 111892.82 111892.82 2.56 False None None False None False 286445.6192 0 3484966 124569 None Vol - II, P. No. 14, It. No. 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 9967.63 9967.63 22.8 False None None False None False 227261.964 0 3484967 124569 None Vol - II, P. No. 14, It. No. 6.13 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 1220.78 1220.78 45.11 False None None False None False 55069.3858 0 3484968 124569 None Vol - II, P. No. 100, It. No. 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 123597.8 123597.8 0.45 False None None False None False 55619.01 0 3484969 124569 None Vol - II, P. No. 104, It. No. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 1270.81 1270.81 4.0 False None None False None False 5083.24 0 3484970 124569 None Vol - II, P. No. 219, It. No. 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Aldrop 16mm dia, 300mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 469.05 469.05 4.0 False None None False None False 1876.2 0 3484971 124569 None Vol - II, P. No. 219, It. No. 22.15.1 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 562.86 562.86 8.0 False None None False None False 4502.88 0 3484972 124569 None Vol - II, P. No. 219, It. No. 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 187.62 187.62 4.0 False None None False None False 750.48 0 3484973 124569 None Vol - II, P. No. 219, It. No. 22.15.8 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS hinges 125 mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 62.54 62.54 16.0 False None None False None False 1000.64 0 3484974 124569 None Vol - II, P. No. 69, It. No. 10.6.2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 68.79 68.79 12.0 False None None False None False 825.48 0 3484975 124569 None Vol - II, P. No. 205, It. No. 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- Complete as per Specification and as directed by the Engineer in-charge of work No 65.04 65.04 24.0 False None None False None False 1560.96 0 3484976 124569 None Vol - II, P. No. 105, It. No. 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 4155.16 4155.16 15.36 False None None False None False 63823.2576 0 3484977 124569 None Vol - II, P. No. 110, It. No. 12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 8193.99 8193.99 9.6 False None None False None False 78662.304 0 3484978 124569 None Vol - II, P. No. 109, It. No. 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 7153.33 7153.33 0.72 False None None False None False 5150.3976 0 3484979 124569 None Vol - II, P. No. 85, It. No. 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Complete as per Specification and as directed by the Engineer in-charge of work Kg 210.13 210.13 206.64 False None None False None False 43421.2632 0 3484980 124569 None Vol - II, P. No. 111, It. No. 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) - Size 62 x 100mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 878.06 878.06 9.8 False None None False None False 8604.988 0 3484981 124569 None Vol - II, P. No. 112, It. No. 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) - 30 mm thickness ---- Complete as per Specification and as directed by the Engineer in-charge of work Cum 4359.04 4359.04 3.15 False None None False None False 13730.976 0 3484982 124569 None Vol - II, P. No. 42, It. No. 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 436.53 436.53 141.19 False None None False None False 61633.6707 0 3484983 124569 None Vol - II, P. No. 43, It. No. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 263.92 263.92 72.81 False None None False None False 19216.0152 0 3484984 124569 None ol - II, P. No. 50, It. No. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 125.08 125.08 214.0 False None None False None False 26767.12 0 3484985 124569 None Vol - II, P. No. 42, It. No. 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (outside) ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 464.05 464.05 146.23 False None None False None False 67858.0315 0 3484986 124569 None Vol - II, P. No. 43, It. No. 8.16.1 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 42.53 42.53 676.2 False None None False None False 28758.786 0 3484987 124569 None Vol - II, P. No. 54, It. No. 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 65.04 65.04 271.01 False None None False None False 17626.4904 0 3484988 124569 None Vol - II, P. No. 60, It. No. 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 1432.17 1432.17 52.46 False None None False None False 75131.6382 0 3484989 124569 None Vol - II, P. No. 40, It. No. 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 348.97 348.97 67.22 False None None False None False 23457.7634 0 3484990 124569 None Vol - II, P. No. 60, It. No. 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 1111.96 1111.96 5.98 False None None False None False 6649.5208 0 3484991 124569 None Vol - II, P. No. 64, It. No. 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 1812.41 1812.41 6.3 False None None False None False 11418.183 0 3484992 124569 None Vol - II, P. No. 48, It. No. 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 158.85 158.85 214.0 False None None False None False 33993.9 0 3484993 124569 None Vol - II, P. No. 46, It. No. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 222.64 222.64 146.23 False None None False None False 32556.6472 0 3484994 124569 None Vol - II, P. No. 48, It. No. 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 143.84 143.84 62.22 False None None False None False 8949.7248 0 3484995 124569 None Vol - II, P. No. 48, It. No. 8.38 Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 50.03 50.03 25.2 False None None False None False 1260.756 0 3484996 124569 None Vol - II, P. No. 48, It. No. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. ---- Complete as per Specification and as directed by the Engineer in-charge of work Sqm 3567.28 3567.28 13.5 False None None False None False 48158.28 0 3484997 124569 None Vol - II, P. No. 48, It. No. 9.24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Complete as per Specification and as directed by the Engineer in-charge of work Kg 706.7 706.7 119.07 False None None False None False 84146.769 0 1720441509000 0 None None Buildings Internal water supply & sanitary works 196185.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3484998 124570 None V-II, P. No. 28, It. No. 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 113.99 113.99 4.0 False None None False None False 455.96 0 3484999 124570 None Vol - V, P. no. 120, It. No. 10.14.9 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. PVC pipe - 75mm(weight of pipe -0.917 kg) ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 237.89 237.89 20.0 False None None False None False 4757.8 0 3485000 124570 None Vol - V, P. no. 120, It. No. 10.14.11 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 443.56 443.56 50.0 False None None False None False 22178.0 0 3485001 124570 None Vol - II, P. no. 136, It. No. 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ---- Complete as per Specification and as directed by the Engineer in-charge of work No 1511.58 1511.58 4.0 False None None False None False 6046.32 0 3485002 124570 None Vol - II, P. no. 123, It. No. 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 7405.5 7405.5 4.0 False None None False None False 29622.0 0 3485003 124570 None Vol - II, P. no. 117, It. No. 13.3.1 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 370.46 370.46 4.0 False None None False None False 1481.84 0 3485004 124570 None Vol - II, P. no. 132, It. No. 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 3818.6 3818.6 4.0 False None None False None False 15274.4 0 3485005 124570 None Vol - II, P. No. 122, it. No. 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 469.58 469.58 60.0 False None None False None False 28174.8 0 3485006 124570 None Vol - II, P. No. 122, It. No. 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 20 mm nominal dia Pipes ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 268.86 268.86 20.0 False None None False None False 5377.2 0 3485007 124570 None Vol - II, P. No. 122, It. No. 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 25 mm nominal dia Pipes ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 366.74 366.74 50.0 False None None False None False 18337.0 0 3485008 124570 None Vol - V, P. No. 191, It. No. 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CATCH BASIN) ---- Complete as per Specification and as directed by the Engineer in-charge of work No 6757.51 6757.51 6.0 False None None False None False 40545.06 0 3485009 124570 None Vol - II, P. no. 123, It. No. 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- Complete as per Specification and as directed by the Engineer in-charge of work Ltr 11.15 11.15 2000.0 False None None False None False 22300.0 0 3485010 124570 None Vol - II, P. no. 127, It. No. 13.59 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Ground Toilet 10Cms X 7.5Cms ---- Complete as per Specification and as directed by the Engineer in-charge of work No 272.58 272.58 6.0 False None None False None False 1635.48 0 1720441509000 0 None None Buildings Internal Electrification 438163.01 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3485011 124571 None CSR 2023-24 It.No 2.02.01 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch ---- Complete as per Specification and as directed by the Engineer in-charge of work Pack 317.42 317.42 20.0 False None None False None False 6348.4 0 3485012 124571 None CSR 2023-24 It.No 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3mtr up to 6Mtr from tapping point to out let via switch ---- Complete as per Specification and as directed by the Engineer in-charge of work Pack 447.22 447.22 15.0 False None None False None False 6708.3 0 3485013 124571 None CSR 2023-24 It.No 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Above 6Mtr up to 10Mtr from tapping Point to out let via switch ---- Complete as per Specification and as directed by the Engineer in-charge of work Pack 654.9 654.9 10.0 False None None False None False 6549.0 0 3485014 124571 None CSR 2023-24 It.No 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 187.62 187.62 4.0 False None None False None False 750.48 0 3485015 124571 None CSR 2023-24 It.No 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 208.86 208.86 2.0 False None None False None False 417.72 0 3485016 124571 None CSR 2023-24 It.No 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 259.6 259.6 10.0 False None None False None False 2596.0 0 3485017 124571 None CSR 2023-24 It.No 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 307.98 307.98 5.0 False None None False None False 1539.9 0 3485018 124571 None CSR 2023-24 It.No 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 376.42 376.42 10.0 False None None False None False 3764.2 0 3485019 124571 None CSR 2023-24 It.No 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 189.98 189.98 4.0 False None None False None False 759.92 0 3485020 124571 None CSR 2023-24 It.No 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 276.12 276.12 10.0 False None None False None False 2761.2 0 3485021 124571 None CSR 2023-24, It.No 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 335.12 335.12 5.0 False None None False None False 1675.6 0 3485022 124571 None CSR 2023-24 It.No 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 405.92 405.92 10.0 False None None False None False 4059.2 0 3485023 124571 None CSR 2023-24 It.No 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way. ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 120.36 120.36 120.0 False None None False None False 14443.2 0 3485024 124571 None CSR 2023-24 It.No 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket. ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 201.78 201.78 20.0 False None None False None False 4035.6 0 3485025 124571 None CSR 2023-24, It.No 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 421.26 421.26 10.0 False None None False None False 4212.6 0 3485026 124571 None CSR 2023-24, It.No 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 212.4 212.4 20.0 False None None False None False 4248.0 0 3485027 124571 None CSR 2023-24 It.No 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 384.68 384.68 4.0 False None None False None False 1538.72 0 3485028 124571 None CSR 2023-24 It.no 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 278.48 278.48 10.0 False None None False None False 2784.8 0 3485029 124571 None CSR 2023-24 It.No 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 184.08 184.08 2.0 False None None False None False 368.16 0 3485030 124571 None CSR 2023-24 It.No 1.13 Supplyin and Fixing Metal Fan Box with Round Hook. ---- Complete as per Specification and as directed by the Engineer in-charge of work No 138.06 138.06 10.0 False None None False None False 1380.6 0 3485031 124571 None CSR 2023-24 P.No 1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 77.88 77.88 90.0 False None None False None False 7009.2 0 3485032 124571 None CSR 2023-24 It.No 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 92.04 92.04 150.0 False None None False None False 13806.0 0 3485033 124571 None CSR 2023-24 It.No 1.2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2mm thick ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 121.54 121.54 30.0 False None None False None False 3646.2 0 3485034 124571 None CSR 2023-24 It.No 1.7.1 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 34.22 34.22 60.0 False None None False None False 2053.2 0 3485035 124571 None CSR 2023-24 It.No 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 30.68 30.68 180.0 False None None False None False 5522.4 0 3485036 124571 None CSR 2023-24 It.No 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 49.56 49.56 1080.0 False None None False None False 53524.8 0 3485037 124571 None CSR 2023-24 It.No 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 74.34 74.34 360.0 False None None False None False 26762.4 0 3485038 124571 None CSR 2023-24 It.No 5.19.4 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure( Double Door) 12 Way SP & N ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 2198.34 2198.34 2.0 False None None False None False 4396.68 0 3485039 124571 None CSR 2023-24 It.No 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A SP ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3485040 124571 None CSR 2023-24 It.No 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898" 6-32 A DP ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 872.02 872.02 2.0 False None None False None False 1744.04 0 3485041 124571 None 19-20SR P.No 6.4.4 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 4 core 16 sqmm ---- Complete as per Specification and as directed by the Engineer in-charge of work Km 167373.56 167373.56 0.25 False None None False None False 41843.39 0 3485042 124571 None CSR 2023-24 P.No 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 814.2 814.2 20.0 False None None False None False 16284.0 0 3485043 124571 None CSR 2023-24 It.No 11.4.1 Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 5-6 W, ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 949.9 949.9 6.0 False None None False None False 5699.4 0 3485044 124571 None CSR 2023-24 It.No 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 1760.56 1760.56 6.0 False None None False None False 10563.36 0 3485045 124571 None CSR 2023-24 It.No 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 3521.12 3521.12 10.0 False None None False None False 35211.2 0 3485046 124571 None CSR 2023-24 P.No 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 143.96 143.96 20.0 False None None False None False 2879.2 0 3485047 124571 None CSR 2023-24 It.No13.10 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 201.78 201.78 10.0 False None None False None False 2017.8 0 3485048 124571 None CSR 2023-34 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 834.26 834.26 6.0 False None None False None False 5005.56 0 3485049 124571 None CSR 2023-34 It.No 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- Complete as per Specification and as directed by the Engineer in-charge of work No 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3485050 124571 None CSR 2023-24 IT.No 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3485051 124571 None CSR 2023-24 It.No 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 191.16 191.16 1.0 False None None False None False 191.16 0 3485052 124571 None CSR 2023-24 It.No 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- Complete as per Specification and as directed by the Engineer in-charge of work Sq CM 0.51 0.51 36000.0 False None None False None False 18360.0 0 3485053 124571 None CSR 2023-24 It.No 5.40.1 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 2908.7 2908.7 2.0 False None None False None False 5817.4 0 3485054 124571 None CSR 2023-24 It.No 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- Complete as per Specification and as directed by the Engineer in-charge of work Rmtr 359.9 359.9 6.0 False None None False None False 2159.4 0 3485055 124571 None CSR 2023-24 It.No 5.15.1 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) FOUR POLE 100Amps 25kA ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 7181.48 7181.48 1.0 False None None False None False 7181.48 0 3485056 124571 None CSR 2023-24 It.No 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 3691.92 3691.92 2.0 False None None False None False 7383.84 0 3485057 124571 None CSR 2023-24 It.N0 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 872.02 872.02 6.0 False None None False None False 5232.12 0 3485058 124571 None CSR 2023-24 It.No 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 607.7 607.7 2.0 False None None False None False 1215.4 0 3485059 124571 None CSR 2023-24 It.No 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 663.26 663.26 3.0 False None None False None False 1989.78 0 3485060 124571 None CSR 2023-24 It.No 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- Complete as per Specification and as directed by the Engineer in-charge of work Each 10991.7 10991.7 2.0 False None None False None False 21983.4 0 3485061 124571 None LUMPSUM Electrical Deposite for Power Sanction ---- Complete as per Specification and as directed by the Engineer in-charge of work Lump Sum for Each 35000.0 35000.0 1.0 False None None False None False 35000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1720441514000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1720441514000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1720441514000 1 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1720441514000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1720441514000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1720441537000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1720441543000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1720441547000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1720441552000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1720441557000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1720441561000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 90 days beyond the validity of the tender. None 1720441567000 0 None None ELIGIBILITY All the formats prescribed in the bid documents shall be filled in complete manner. (section 2 & 3 of the bid document) and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose. None 1720441571000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid. None 1720441576000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1720441580000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract Help Desk for more assistance Phone: 080-25501216/ 25501227) None 1720441584000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1720441590000 0 None None ELIGIBILITY Materials like, steel, cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should got tested positive by the quality control authority before use on the work. None 1720441606000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2019-20, 2020-21, 2021-22,2022-23 and 2023-24. None 1720441695000 0 None None ELIGIBILITY The Defects Liability Period is 1 (one) year from the date of completion of the work including Maintenance. None 1720441700000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within Three days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive. None 1720441706000 0 None None ELIGIBILITY Refer Special Instructions to tenderers in bid document. None 1720441733000 0 None None ELIGIBILITY The Bidder belonging to the schedule Tribe shall be Domicile of the State of Karnataka for more than 10 years. None 1720441739000 0 None None ELIGIBILITY The eligible tenderers belonging to Schedule Tribe should upload Schedule Tribe certificate issued by Tahasildar /competent authority and the certificate should be duly attested by Gazetted Officer. None 1720441745000 0 None None ELIGIBILITY The concrete item rate inclusive of formwork None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Satisfactorily completed as prime contractor, at least one any construction work of value not less than of Rs. 16.19 Lakhs (25% of the cost of the work) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year at least one similar work, the following minimum quantities of work: Sl. No, Description of works, Quantity, 1)PCC/RCC:117.00 Cum, 2)TMT Steel:7.96 Tonnes,3)Plaster:1058.00 Sqm, 4)Painting:1467.00 Sqm, 5)Flooring/Wall Tiles:170.00 Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The Tenderer or his identified sub contractor should possess required valid electrical license issued by competent authority for executing building electrification works and should have executed similar electrical works totaling Rs. 1.10 Lakhs in any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The Tenderer or his identified sub contractor should possess valid license issued by competent authority for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs.0.50 Lakhs in any one year. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None achieved in at least one financial year a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 64.73 Lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and /or availability of credit facilities of not less than Rs. 19.50 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None ST, Class III & Above KPWD Civil Contractor Registration Certificate issued from competent authority. Others Registration Certificate createdTs version createdDate modifiedDate documentName None None None None Others -- Registration Certificate None None None None Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity( AXNX5.00- B )where A Maximum value of civil engineering works executed in any one year during the last five years 2019-20 to 2023-24 (updated to 2023-24 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next 6 months (period of completion of the works for which Tenders are invited) Note: (1)The statements showing the value of existing commitments and on-going works as well as the Stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.(2)Tenderer shall submit the list of Ongoing works duly certified by the Auditor/Chartered Accountant Others Bid Capacity createdTs version createdDate modifiedDate documentName None None None None Others -- Bid Capacity None None None None List of Minimum Key Personnel to be deployed by the contractor at site for Contract work.Sl. No. Position Qualification No. of persons 1 Site Engineer (Civil) B.E. Civil with minimum experience of 7 years in the Construction of buildings or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (One) 2 Site Engineer (Electrical Engineer) B.E. Electrical with minimum experience of 5 years in the Construction of buildings or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (Two) Others Technical Staff createdTs version createdDate modifiedDate documentName None None None None Others -- Technical Staff
tenderCriterionDocumentList	documentName optional documentTypeText Contractor Registration Certificate True Technical Bid Annual Turnover Certificate Certified by Chartered Accountant True Technical Bid The eligible tenderers belonging to Schedule Tribe should upload Schedule Tribe Certificate issued by Tahasildar /competent authority and the certificate should be duly attested by Gazetted Officer. True Technical Bid The Bidder belonging to the schedule Tribe shall be Domicile of the State of Karnataka for more than 10 years. True Technical Bid Workdone certificate issued by the Officer not below the rank of Executive Engineer True Technical Bid Tenderer should have latest GST Registration, PAN Card in their name True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None