createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1721805514387 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 1425000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 05-08-2024 17:00:00 tenderQueryClose 26-07-2024 15:00:00 technicalBidOpen 07-08-2024 11:00:00 publishedDate 24-07-2024 13:56:19 publishedByPost KKRTC_EE_HOFF_BLR publishedByUser KPE10109 - M ERESH bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 29-07-2024 15:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Sri.M.Eresh splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 8392294828 mobileNumber 9972039797 tenderSupplierList None
tenderSchedule	createdTs 1721805514422 version 10 createdDate None modifiedDate None tenderNumber KKRTC/2024-25/BD/WORK_INDENT64 title Construction of Express Bus Stop with Passengers Amenities at Manvi description Construction of Express Bus Stop with Passengers Amenities at Manvi category WORKS categoryText Works ecv 95000000.00 deptName Kalyana Karnataka Road Transport Corporation status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 5937 locationName KKRTC Divisional Controller Office Bellari provisionalAmount 95000000.0 groupOverheadTotal 919315.27 fileNumber 0033
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1721805514000 0 None None Buildings Construction of Express Bus Stop with Passengers Amenities at Manvi 94080684.73 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3596174 130982 None code01 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as perdrawing and technical specifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.SRP- Vol-I (8/1.14.1) Depth exceeding 1.5 m, but not exceeding 3 m.In all kinds of soils Depth upto 3 m Cum 126.37 126.37 2436.24 False None None False None False 307867.6488 0 3596175 130982 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.SRP- Vol-I (8/1.15.1) 1 In ordinary/soft rock without blasting upto 1.5 m depth Cum 449.75 449.75 523.12 False None None False None False 235273.22 0 3596176 130982 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances requiredcomplete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately).SRP- Vol-I (15/2.1.2) Mix 1:4:8( M7.5) Using 40 mm nominal size graded crushed coarse aggregates Cum 7017.69 7017.69 305.06 False None None False None False 2140816.5114 0 3596177 130982 None code04 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.SRP- Vol-I (7/1.9) Cum 252.75 252.75 144.38 False None None False None False 36492.045 0 3596178 130982 None code05 KSRB 2.3 : Filling (new earth )Refilling available earth around trenches/pipelines, cables in layersnot exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m .Including cost of all labour complete as per specifications.SRP- Vol-I (7/1.10) Cum 527.81 527.81 135.0 False None None False None False 71254.35 0 3596179 130982 None code06 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).SRP- Vol-I (15/2.2.3) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8085.8 8085.8 204.0 False None None False None False 1649503.2 0 3596180 130982 None code07 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.SRP- Vol-I (7/1.9) Cum 329.57 329.57 1181.33 False None None False None False 389330.9281 0 3596181 130982 None code08 KSRB 2.3 : Filling (new earth )Refilling available earth around trenches/pipelines, cables in layersnot exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m .Including cost of all labour complete as per specifications.SRP- Vol-I (7/1.10) Cum 520.38 520.38 1396.66 False None None False None False 726793.9308 0 3596182 130982 None code09 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators,providing weep holes wherever necesary, including all lead & lifts, costof all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).SRP- Vol-I (17/2.4.1) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Cum 7934.55 7934.55 7.62 False None None False None False 60461.271 0 3596183 130982 None code10 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).SRP- Vol-I (15/2.2.3) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP 115/1 (Foundation upto plinth (a) Isolated) Cum 8478.32 8478.32 599.92 False None None False None False 5086313.7344 0 3596184 130982 None code100 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply incl all CPVC plain & brass threaded fittings. This incl jointing of pipes and fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete 50mm dia as pe direction of Engineer in charge External work 25 mm SRP- Vol-II (122/13.33.3) Mtr 370.41 370.41 80.0 False None None False None False 29632.8 0 3596185 130982 None code101 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply incl all CPVC plain & brass threaded fittings. This incl jointing of pipes and fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete 50mm dia as pe direction of Engineer in charge External work 20 mm SRP- Vol-II (122/13.33.2) Mtr 271.55 271.55 70.0 False None None False None False 19008.5 0 3596186 130982 None code102 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply incl all CPVC plain & brass threaded fittings. This incl jointing of pipes and fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete 50mm dia as pe direction of Engineer in charge External work 15 mm SRP- Vol-II (122/13.33.1) Mtr 207.72 207.72 50.0 False None None False None False 10386.0 0 3596187 130982 None code103 White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap SRP- Vol-II (133/14.7.7) Nos 2626.66 2626.66 2.0 False None None False None False 5253.32 0 3596188 130982 None code104 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.SRP- Vol-II (126/14.13.2) Nos 2916.99 2916.99 3.0 False None None False None False 8750.97 0 3596189 130982 None code105 Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.SRP- Vol-II (75/11.1) Kg 132.64 132.64 4445.1 False None None False None False 589598.064 0 3596190 130982 None code106 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces,excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. SRP- Vol-II (26/7.38) Sq CM 710.78 710.78 231.57 False None None False None False 164595.3246 0 3596191 130982 None code107 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing ofcasing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes,collars and caps etc.) for Borewell depth of 0 to 50 m SRP- Vol-V (139/12.2.1) Rmtr 382.85 382.85 60.0 False None None False None False 22971.0 0 3596192 130982 None code108 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing ofcasing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes,collars and caps etc.) for Borewell depth of 50 to 100 m SRP- Vol-V (139/12.2.2) Rmtr 479.49 479.49 30.0 False None None False None False 14384.7 0 3596193 130982 None code109 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing ofcasing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes,collars and caps etc.) for Borewell depth of 100 to 150 m SRP- Vol-V (139/12.2.3) Rmtr 510.46 510.46 60.0 False None None False None False 30627.6 0 3596194 130982 None code11 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 14413.41 14413.41 124.54 False None None False None False 1795046.0814 0 3596195 130982 None code110 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes andspecials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 160mm dia., 6 kg/sqcm & class 3 SRP- Vol-V 134/1.9) Rmtr 742.16 742.16 20.0 False None None False None False 14843.2 0 3596196 130982 None code111 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes andspecials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 140mm dia., 6 kg/sqcm & class 3 SRP- Vol-V 113/10.1.8) Rmtr 723.57 723.57 40.0 False None None False None False 28942.8 0 3596197 130982 None code112 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. 5 O050A Cleaning of borewells including yield.VOL-V 139/12.2 Each 6239.84 6239.84 1.0 False None None False None False 6239.84 0 3596198 130982 None code113 Stone Work ( Machine cut edges ) for wall lining etc,( Veneer work) upto 10 mtr height backing filled with a grout of average 12mm thick cement motar 1:3 ( 1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade ( to be secured to the backing and the sides by means of cramps and pins which shall be paid for seperately) white sand stone exposed face fine dressed with rough 30mm thick ( SRP 121/7.23.3.5 )(CSR) ( approved in Developmental works in Sedam Bus Station ) Sq CM 3495.21 3495.21 38.0 False None None False None False 132817.98 0 3596199 130982 None code114 Providing and laying a burried expansion joint, expansion gap being 20 mm, covered with 12 mm thick, 200 mm wide galvanised weldable structural steel plate as per IS: 2062, placed symmetrical to centre line of the JOint, resting freely over the top surface of the deck concrete, welding of 8 mm dia. 100 mm long galvanised nails spaced 300 mm c/c along the centre line of the plate, including cost of materials, labour, HOM complete as per specifications, all as specified in clause 2600.4 MORTH Specification No. 2604 SRP 31.1( 18-19 SR) Mtr 1479.36 1479.36 165.0 False None None False None False 244094.4 0 3596200 130982 None code115 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..SRP- Vol-II(41/8.4.2)) Sq CM 386.56 386.56 215.0 False None None False None False 83110.4 0 3596201 130982 None code116 Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide ( mix of same proportion ) , including cost of materials, labour, curing, complete as per specifications..SRP- Vol-II(67/9.37) Sq CM 973.85 973.85 126.0 False None None False None False 122705.1 0 3596202 130982 None code117 Storage Unit- Wooden -One side laminate Providing and fixing woode storage unit one side laminate with 18 mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with openable shutters and individual locking system for shutter, 9 mm PLY with edge bound for rear portion with Hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolt complete as per specifications, drawings and as directed by Engineer in charge.PLY STORAGE - 900 mm W X 430 mm D X 2100 mm Ht SRP( SR 18-19) (39.24.3) Sq CM 24532.2 24532.2 3.0 False None None False None False 73596.6 0 3596203 130982 None code118 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :SRP- Vol-I (134/14.11.2) Size 600x450x200 mm Nos 6296.59 6296.59 5.0 False None None False None False 31482.95 0 3596204 130982 None code119 Supplying, fabricating and fixing of Stainless steel cladding for walls using 304 grade Stainless steel16 guage sheet wall cladding of thickness over the frame made out of 50x5Dmmx3mm thickness anodized aluminium frame work at an equal distance of 2ft vertifically fixed to the wall using 1OOmm screws, guttas, anchor bolts and fastners with all necessary bending and cutting as per the desing and site condition. The frame work finally to be finished with 12mm BWP plywood to receive the SS sheet on it uniformly. Including cost of all materials, mortar, labour, curing etc., complete as per specification. :SRP-18-19 (14.69) Sq CM 15301.65 15301.65 12.0 False None None False None False 183619.8 0 3596205 130982 None code12 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 12717.72 12717.72 452.26 False None None False None False 5751716.0472 0 3596206 130982 None code120 SRP:1.2 Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe 25 mm dia 2 .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 1.2.2 Mtr 96.64 96.64 2000.0 False None None False None False 193280.0 0 3596207 130982 None code121 SRP: 1.3.2 -Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick Mtr 97.88 97.88 400.0 False None None False None False 39152.0 0 3596208 130982 None code122 1.1.2 Open Conduit System:Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structureor rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.25mm dia 2mm thick Mtr 100.35 100.35 70.0 False None None False None False 7024.5 0 3596209 130982 None code123 SRP:2.3:Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm 2.3.2 Mtr 32.21 32.21 4000.0 False None None False None False 128840.0 0 3596210 130982 None code124 SRP:2.3:Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 2.5 sqmm (P6/2.3.3) Mtr 52.03 52.03 4000.0 False None None False None False 208120.0 0 3596211 130982 None code125 SRP:2.3:Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 4sqmm (P6/2.3.4) Mtr 78.05 78.05 1000.0 False None None False None False 78050.0 0 3596212 130982 None code126 SRP:2.3:Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 6sqmm (P6/2.3.5) Mtr 113.98 113.98 500.0 False None None False None False 56990.0 0 3596213 130982 None code127 SRP:2.3:Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 10sqmm (P6/2.3.6) Mtr 206.91 206.91 60.0 False None None False None False 12414.6 0 3596214 130982 None code128 SRP:2.3:Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 16sqmm(P6/2.3.7) Mtr 394.0 394.0 60.0 False None None False None False 23640.0 0 3596215 130982 None code129 SRP:2.2.1:Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box No 333.29 333.29 67.0 False None None False None False 22330.43 0 3596216 130982 None code13 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 13565.56 13565.56 176.61 False None None False None False 2395813.5516 0 3596217 130982 None code130 SRP:2.2.1:Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3 Mtr upto 6Mtr from tapping point to outlet via switch box. (P5/2.2.2) No 469.58 469.58 115.0 False None None False None False 54001.7 0 3596218 130982 None code131 SRP:2.2.1:Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6 Mtr upto 10Mtr from tapping point to outlet via switch box. (P5/2.2.3) No 687.64 687.64 250.0 False None None False None False 171910.0 0 3596219 130982 None code132 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-3Way 3.4.1 No 170.98 170.98 47.0 False None None False None False 8036.06 0 3596220 130982 None code133 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5way (P15/3.4.3) No 219.3 219.3 15.0 False None None False None False 3289.5 0 3596221 130982 None code134 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6 way (P15/3.4.4) No 272.58 272.58 44.0 False None None False None False 11993.52 0 3596222 130982 None code135 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12 way (P15/3.4.6) No 395.24 395.24 110.0 False None None False None False 43476.4 0 3596223 130982 None code136 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 18 way (P15/3.4.8) No 501.79 501.79 6.0 False None None False None False 3010.74 0 3596224 130982 None code137 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module 3.5.1 No 169.74 169.74 47.0 False None None False None False 7977.78 0 3596225 130982 None code138 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4 mod (P16/3.5.3) No 216.82 216.82 15.0 False None None False None False 3252.3 0 3596226 130982 None code139 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6 Module (P16/3.5.4) No 289.92 289.92 44.0 False None None False None False 12756.48 0 3596227 130982 None code14 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 9326.33 9326.33 156.85 False None None False None False 1462834.8605 0 3596228 130982 None code140 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12 Module (P16/3.5.6) No 426.21 426.21 110.0 False None None False None False 46883.1 0 3596229 130982 None code141 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 18 Module (P16/3.5.8) No 566.22 566.22 6.0 False None None False None False 3397.32 0 3596230 130982 None code142 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch 3.6.1 No 126.37 126.37 854.0 False None None False None False 107919.98 0 3596231 130982 None code143 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3 way socket (P16/3.6.3) No 211.86 211.86 354.0 False None None False None False 74998.44 0 3596232 130982 None code144 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. modular stepped fan regulator (P16/3.6.4) No 442.32 442.32 115.0 False None None False None False 50866.8 0 3596233 130982 None code145 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch (P16/3.6.7) No 223.02 223.02 11.0 False None None False None False 2453.22 0 3596234 130982 None code146 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps universal socket (P16/3.6.10) No 292.4 292.4 11.0 False None None False None False 3216.4 0 3596235 130982 None code147 Supplying and fixing Fan box with round hook (P3/1.13) No 144.96 144.96 115.0 False None None False None False 16670.4 0 3596236 130982 None code148 Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely 25mm 1.9.2 Mtr 27.25 27.25 60.0 False None None False None False 1635.0 0 3596237 130982 None code149 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70 percentage lumen maintenance with CRI Greeter than 80. Power Input: 220-240V @ 50/60Hz & Power factor Greeter than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.11.3.2 LED light fighting 1 x4'- 20/22 w No 854.91 854.91 180.0 False None None False None False 153883.8 0 3596238 130982 None code15 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.SRP- Vol-II (100/12.12) Cum 153886.27 153886.27 0.27 False None None False None False 41549.2929 0 3596239 130982 None code150 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70 percentage lumen maintenance with CRI Greeter than 80. Power Input: 220-240V @ 50/60Hz & Power factor Greeter than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W 11.5.3 No 1640.43 1640.43 125.0 False None None False None False 205053.75 0 3596240 130982 None code151 Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI Greeter than 70 percentage. Efficacy Greeter than 100 lumen per watt, 120degree beam spread, life Greeter than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF Greeter than 0.95, power loss should Less than 5 percentage of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20 percentage, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' / 1' x 4' 34 -36watt 12.6.2 No 5641.16 5641.16 4.0 False None None False None False 22564.64 0 3596241 130982 None code152 11.8.4 Supply of LED Streetlight luminaire 90 watt with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70 percentage, maximum light intensity should be between 60 degrees to 70 degrees. CCT greeter than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greeter than IK08. Power Factor greeter than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greeter than 130lm/w, nominal CRI greeter than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.LED Streetlight 90 Watts No 10977.54 10977.54 3.0 False None None False None False 32932.62 0 3596242 130982 None code153 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 6.3.1. No 3697.17 3697.17 70.0 False None None False None False 258801.9 0 3596243 130982 None code154 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 percentage, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10 percentage RPM, Rated air delivery 210 +/- 10 percentage Cubic Meter Minimum, Rated service value plus or minus 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty. 6.4.1 No 3316.8 3316.8 35.0 False None None False None False 116088.0 0 3596244 130982 None code155 6.2.1 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300mm) 7.2.1 No 3678.59 3678.59 13.0 False None None False None False 47821.67 0 3596245 130982 None code156 Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall / ceiling / Rafter / Girders 13.7.1 No 151.15 151.15 396.0 False None None False None False 59855.4 0 3596246 130982 None code157 Supplying and Fixing........mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires.Using 40mm dia G.I.Pipe 13.2.3 No 1831.24 1831.24 6.0 False None None False None False 10987.44 0 3596247 130982 None code158 6.5.1 Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply. No 3087.58 3087.58 10.0 False None None False None False 30875.8 0 3596248 130982 None code159 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. Ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.13.10 No 211.86 211.86 126.0 False None None False None False 26694.36 0 3596249 130982 None code16 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. SRP- Vol-II (105/12.54) Rmtr 394.0 394.0 34.2 False None None False None False 13474.8 0 3596250 130982 None code160 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame.13.13 No 875.97 875.97 13.0 False None None False None False 11387.61 0 3596251 130982 None code161 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.5.18.1 6-32Amps SP No 514.18 514.18 85.0 False None None False None False 43705.3 0 3596252 130982 None code162 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.5.18.1 6-32 Amps DP. (5.18.2) No 915.62 915.62 45.0 False None None False None False 41202.9 0 3596253 130982 None code163 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.5.18.1 6-32 Amps TPN. (5.18.7) No 2127.36 2127.36 20.0 False None None False None False 42547.2 0 3596254 130982 None code164 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.5.18.1 50-63Amps TPN. (5.18.9) No 3826.03 3826.03 8.0 False None None False None False 30608.24 0 3596255 130982 None code165 11.2.1 Supplying & fixing retrofit type -PL- LED Lamp .......W LED linear source with CCT 6500 degree K, CRI greeter than 70 percentage. efficacy greeter than 80 lumen per watt, life greeter than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greeter than 0.95, power loss should less than 5 percentage of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20 percentage, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. Each 771.89 771.89 14.0 False None None False None False 10806.46 0 3596256 130982 None code166 12.2.3 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Each 1474.41 1474.41 10.0 False None None False None False 14744.1 0 3596257 130982 None code167 9.3.5 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.10 KVA ON LINE UPS. Each 128323.23 128323.23 1.0 False None None False None False 128323.23 0 3596258 130982 None code168 9.5.6 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.75 / 80 AH capacity Each 12603.1 12603.1 10.0 False None None False None False 126031.0 0 3596259 130982 None code169 8.1 Supplying and drawing UTP-CAT 6E LAN cable. Mtr 47.08 47.08 1200.0 False None None False None False 56496.0 0 3596260 130982 None code17 VOL II SRP 106/12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges (both side prelam) Sq CM 2931.47 2931.47 9.45 False None None False None False 27702.3915 0 3596261 130982 None code170 8.4.6 Supplying & Fixing of switch mounting rack with power manager & Cable manager.24U with 650mm depth Each 38887.25 38887.25 4.0 False None None False None False 155549.0 0 3596262 130982 None code171 8.9.10 Supplying fixing of Network Switches 24 port 10/100/1000 Switch No 9187.18 9187.18 4.0 False None None False None False 36748.72 0 3596263 130982 None code172 8.10.1 Supplying & fixing of I/O socket with back box No 607.11 607.11 70.0 False None None False None False 42497.7 0 3596264 130982 None code173 6.8.5 Supplying of 5 star 1.5 TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. No 69823.84 69823.84 6.0 False None None False None False 418943.04 0 3596265 130982 None code174 6.12 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support up to 3.0 ton split/cassette type A/C. No 3933.82 3933.82 6.0 False None None False None False 23602.92 0 3596266 130982 None code175 6.13.1 Supplying and installation of insulated refrigerant copper tubing of 5/8 and 3/8 with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit. Leak testing oil and gas charging for additional piping length of tube. Mtr 1919.21 1919.21 15.0 False None None False None False 28788.15 0 3596267 130982 None code176 3.14.15 Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.16/6 Amps combined plug and socket with control switch Each 270.1 270.1 15.0 False None None False None False 4051.5 0 3596268 130982 None code177 10.1.9 Supplying, installing, testing and commissioning of 100 KVA/ 80 kw Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 /ISO 8528 & IS 1002 / ISO 3046 Generator set specifications. Engine Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation Alternator: Alternator is suitable for operation at 1500 RPM, 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, protections with insulation class H self regulated through an AVR. The alternator shall have + 1.0 percentage Voltage regulation (max) in static conditions- IP: 23 Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lamps for Load On and Set Running Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections. Genset Controller: microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface, Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory, Provide Alternator Data. Voltage (1 ph or 3 ph line to line and line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph and total), Frequency, Provide Engine Data, Starting battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Meter calibration, Engine controls, Power Start operates on 12 VDC batteries,- Auto start mode accepts a ground signal from remote devices to automatically start the DG set. The remote start will also wake up the control system from sleep mode. No 1116284.48 1116284.48 1.0 False None None False None False 1116284.48 0 3596269 130982 None code178 10.2.4 Supply, Erection, testing and commissioning of AMF panel suitable for .....KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .....amps 4 pole contactor for alternator with thermal O/L relay,..... Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility.Above 82.5 KVA upto 125 KVA No 135708.9 135708.9 1.0 False None None False None False 135708.9 0 3596270 130982 None code179 15.111 Supplying of four bucket stand alongwith buckets. Complete No 2292.15 2292.15 6.0 False None None False None False 13752.9 0 3596271 130982 None code18 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.SRP- Vol-II (85/11.34A) Kg 208.15 208.15 211.68 False None None False None False 44061.192 0 3596272 130982 None code180 15.117 Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick.complete including cost of materials, labour, usage charges of machinery complete as per specifications. No 2354.1 2354.1 4.0 False None None False None False 9416.4 0 3596273 130982 None code181 15.113 Supplying of Hand gloves. complete Pair 1208.02 1208.02 4.0 False None None False None False 4832.08 0 3596274 130982 None code182 15.114 Supplying of first aid box. complete No 743.4 743.4 4.0 False None None False None False 2973.6 0 3596275 130982 None code183 15.116 Supplying of FIRST AID CHART with lamination. Complete No 495.6 495.6 4.0 False None None False None False 1982.4 0 3596276 130982 None code184 Ges SR/11KV Material/593/ 68.17: Caution/Danger Board No 185.85 185.85 10.0 False None None False None False 1858.5 0 3596277 130982 None code185 21-22/Vol-4/Part-B/Lift Irrigation/4.41:Providing and fixing chain link fencing consisting of 3 m long 65 x 65 x 6 mm M.S angles with top 50 cm bent at 30 degree to vertical fixed at 2.5 m intervals in C.C 1 : 3 : 6 proportion using 20 mm down graded coarse aggregate for 70 cm depth, fixing 50 x 50 mm opening 8 gauge G.I chain link mesh upto 1.8 m height of poles using 8 gauge stretcher wire at top and bottom and 30 x 30 x 5 mm M.S angles with bolts /nuts / washers ( 4 bolts for each pole ), fixing 3 rows of 12 gauge ( 4 barbs at 7.5 cm c/c ) G.I barbed wire for top bent portion of poles, including cost of all materials, machinery, labour, excavation of pit, mixing and laying concrete, curing, drilling holes in angles, cleaning angles, painting angles and Chain links with 2 coats of synthetic enamel paint over a coat of primer etc., complete with all lead and lifts. Sqm per Meter 1704.86 1704.86 20.0 False None None False None False 34097.2 0 3596278 130982 None code186 5.20.4 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. No 5648.6 5648.6 2.0 False None None False None False 11297.2 0 3596279 130982 None code187 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.5.19.6 4Way SP &N No 1888.23 1888.23 20.0 False None None False None False 37764.6 0 3596280 130982 None code188 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.5.19.6 8way SP &N.(5.19.8) Double door. No 2297.1 2297.1 10.0 False None None False None False 22971.0 0 3596281 130982 None code189 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.5.19.6 12way SP &N. (5.19.9) Double door. No 2885.63 2885.63 2.0 False None None False None False 5771.26 0 3596282 130982 None code19 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.SRP- Vol-II (14/6.8) Cum 9873.59 9873.59 243.14 False None None False None False 2400664.6726 0 3596283 130982 None code190 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (Icu = Ics) 5.15.11 160Amps 25kA. No 16660.83 16660.83 2.0 False None None False None False 33321.66 0 3596284 130982 None code191 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter. No 1765.57 1765.57 2.0 False None None False None False 3531.14 0 3596285 130982 None code192 Supplying, fixing and wiring 50/5Amps to 400/5 Amps 5VA burden current transformer. 0.5 accuracy. (5.34) No 696.31 696.31 9.0 False None None False None False 6266.79 0 3596286 130982 None code193 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC 50Hz 12/24v DC (5.38) No 638.08 638.08 12.0 False None None False None False 7656.96 0 3596287 130982 None code194 Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.14SWG 5.42.1 Sq CM 0.61 0.61 100000.0 False None None False None False 61000.0 0 3596288 130982 None code195 Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.100Amps 4x30x6mm Aluminium Strips 5.40.1 Mtr 3054.13 3054.13 3.0 False None None False None False 9162.39 0 3596289 130982 None code196 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.40x40x6mm 5.41.1 Mtr 377.89 377.89 40.0 False None None False None False 15115.6 0 3596290 130982 None code197 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 12.56 No 4348.89 4348.89 15.0 False None None False None False 65233.35 0 3596291 130982 None code198 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.12.57 No 5273.18 5273.18 10.0 False None None False None False 52731.8 0 3596292 130982 None code199 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm GI strip 12.58.1 Mtr 101.59 101.59 60.0 False None None False None False 6095.4 0 3596293 130982 None code20 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-II (41/8.2.2) Sq CM 345.68 345.68 419.4 False None None False None False 144978.192 0 3596294 130982 None code200 Ges SR/11KV Material/134/18.01:LT Distribution Box for 100 kVA DTC with MCCB's (Sheet Metal) (Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018) Each 28107.95 28107.95 1.0 False None None False None False 28107.95 0 3596295 130982 None code201 Gescom sr/11KV materials/207/32.11: 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) Km 221747.54 221747.54 0.3 False None None False None False 66524.262 0 3596296 130982 None code202 Gescom sr/11KV Labour/176/21.06: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 to 95 Sqmm Km 38581.22 38581.22 0.3 False None None False None False 11574.366 0 3596297 130982 None code203 Vol I/1.14.1:Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7)In soil (hard) 6.6.2 Cum 126.37 126.37 150.0 False None None False None False 18955.5 0 3596298 130982 None code204 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 (2019-20 SR) No 3.71 3.71 220.0 False None None False None False 816.2 0 3596299 130982 None code205 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 2.5 sqmm. (6.17.2) No 4.95 4.95 300.0 False None None False None False 1485.0 0 3596300 130982 None code206 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 4.0 sqmm. (6.17.3) No 8.67 8.67 260.0 False None None False None False 2254.2 0 3596301 130982 None code207 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 6 sqmm. (6.17.4) No 8.67 8.67 120.0 False None None False None False 1040.4 0 3596302 130982 None code208 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 10sqmm.(6.17.5) No 9.91 9.91 24.0 False None None False None False 237.84 0 3596303 130982 None code209 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 16 sqmm. (6.17.6) No 15.41 15.41 12.0 False None None False None False 184.92 0 3596304 130982 None code21 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.SRP-Vol-II (11.35.1.2/86) Kg 605.87 605.87 59.61 False None None False None False 36115.9107 0 3596305 130982 None code210 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 50 sqmm Long Barrel. (6.17.9) No 74.34 74.34 16.0 False None None False None False 1189.44 0 3596306 130982 None code211 Vol V/191/16.9:onstructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. No 6757.5 6757.5 5.0 False None None False None False 33787.5 0 3596307 130982 None code212 Vol V/10.1.8:Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete 110mm Mtr 509.22 509.22 250.0 False None None False None False 127305.0 0 3596308 130982 None code213 Vol II/09/5.4:(Size stone masonry) Construction of Platform with size stone, cement concrete for errection of Transformer/Metering Cubicle /Heavy equipment. Construction of platform [1.5m x 1.5m x 1.2m] in size srone , for errection of transformer /Heavy equipment including all materials , labour Excavation of [1.5mx1.5mx1m] pit for foundation providing and laying cement concrete 1:4:8 for foundation laid in 10cm thick layers, well compacted curing etc, complete providing and construction of stone masonary 0.9m below ground level and 1.2m above ground level neatly hammer dressed in cement morter 1:6 Providing and Laying cement concrete slab 1.5x1.5x.10mtr with cement concrete of 1:2:4 mix forming & cutting complete , providing pointing to stone masonary in cement morter 1:3 after rackng joint & nisely lining curing etc, plastering the concrete surfaces in cement morter 1:4 including smooth randering curing etc, curing at every stages completely. Cum 7915.97 7915.97 2.7 False None None False None False 21373.119 0 3596309 130982 None code214 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.5.33 Each 11541.28 11541.28 1.0 False None None False None False 11541.28 0 3596310 130982 None code215 Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three phase LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect / disconnect banks, with automatic recognition or with standard programs.5.39 Each 26811.96 26811.96 1.0 False None None False None False 26811.96 0 3596311 130982 None code216 VOl-6/KPTCL/P.No-158:Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete.Work shall be carried out as per the instructions of Engineerin-charge of works as per the standard procedure Cum 2196.74 2196.74 2.0 False None None False None False 4393.48 0 3596312 130982 None code217 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machineries like induction motor.5.37 Kvar 594.72 594.72 20.0 False None None False None False 11894.4 0 3596313 130982 None code218 Gescom sr/11KV materials/536/66.04:HDPE/PLB Pipe 50/42 mm Km 105332.34 105332.34 0.06 False None None False None False 6319.9404 0 3596314 130982 None code219 5.14.2 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.32Amps Each 5067.51 5067.51 5.0 False None None False None False 25337.55 0 3596315 130982 None code22 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications.SRP-Vol-II (11.37.2/82) Sq CM 1450.86 1450.86 10.44 False None None False None False 15146.9784 0 3596316 130982 None code220 5.16 Supplying and fixing of Shunt trip suitable for MCCB.CBCT. Mtr 2110.01 2110.01 1.0 False None None False None False 2110.01 0 3596317 130982 None code221 Gescom SR/SSM 11KV/92/12.08:Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 250 kVA, Aluminium Wdg, Star 2 (5 Star) No 667908.96 667908.96 1.0 False None None False None False 667908.96 0 3596318 130982 None code222 Gescom SR/11KV Labour/74/8.03: Erection of 200 - 250 kVA Transformer No 2822.44 2822.44 1.0 False None None False None False 2822.44 0 3596319 130982 None code223 Gescom SR/SSM 11KV/289/41.01: Load Break Switch with Panel No 90743.12 90743.12 1.0 False None None False None False 90743.12 0 3596320 130982 None code224 Gescom SR/SSM 11KV/1/1.01:RCC Pole - 9 Mtr Long, 145 Kg WL No 8767.16 8767.16 5.0 False None None False None False 43835.8 0 3596321 130982 None code225 Gescom SR/11KV Labour/30/2.02:Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth No 1379.0 1379.0 5.0 False None None False None False 6895.0 0 3596322 130982 None code226 Gescom SR/SSM 11KV/11/2.01:11 kV, Horizontal Cross Arm - Mild Steel (MS)(Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018) No 460.9 460.9 10.0 False None None False None False 4609.0 0 3596323 130982 None code227 Gescom SR/11KV Labour/51/5.03:Fixing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing No 318.42 318.42 10.0 False None None False None False 3184.2 0 3596324 130982 None code228 Gescom SR/SSM 11KV/47/6.01:11 kV Ceramic Pin Insulator (Shell only) No 102.83 102.83 30.0 False None None False None False 3084.9 0 3596325 130982 None code229 Gescom SR/SSM 11KV/55/6.09:DISC Insulator 45 kN Porcelain No 631.89 631.89 15.0 False None None False None False 9478.35 0 3596326 130982 None code23 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.SRP- Vol-II (83/11.28) Sq CM 700.03 700.03 212.26 False None None False None False 148588.3678 0 3596327 130982 None code230 Gescom SR/SSM 11KV/166/24.01:11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018) No 11708.55 11708.55 1.0 False None None False None False 11708.55 0 3596328 130982 None code231 Gescom SR/11KV Labour/97/13.02:Fixing of GOS including wiring (11 kV Single Break 200 Amps) No 1367.85 1367.85 1.0 False None None False None False 1367.85 0 3596329 130982 None code232 Gescom SR/SSM 11KV/39/5.09, 5.11, 5.12, 5.13, 5.14, 5.16: Guy Clamp - MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)Turn Buckle (GI) (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)Anchor Rod using 12 mm rounds/Guy Rod - MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)MS Fish Plate Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator No 2106.3 2106.3 6.0 False None None False None False 12637.8 0 3596330 130982 None code233 Gescom SR/11KV Labour/58/5.10:Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) No 329.57 329.57 6.0 False None None False None False 1977.42 0 3596331 130982 None code234 Gescom SR/SSM 11KV/137/19.01: 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007) Set 1139.88 1139.88 1.0 False None None False None False 1139.88 0 3596332 130982 None code235 Gescom SR/11KV Labour/101/13.06:Fixing of 3 Nos Lightning Arrestor including wiring Set 147.44 147.44 1.0 False None None False None False 147.44 0 3596333 130982 None code236 Gescom SR/SSM 11KV/139/20.01:11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) Set 1324.49 1324.49 1.0 False None None False None False 1324.49 0 3596334 130982 None code237 Gescom SR/11KV Labour/96/13.01:Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring Set 293.64 293.64 1.0 False None None False None False 293.64 0 3596335 130982 None code238 Gescom SR/SSM 11KV/59/7.02:Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM Km 57283.92 57283.92 0.5 False None None False None False 28641.96 0 3596336 130982 None code239 15.111 Supplying of four bucket stand alongwith buckets. Complete No 2292.15 2292.15 2.0 False None None False None False 4584.3 0 3596337 130982 None code24 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. SRP- Vol-II (64/9.30) Sq CM 6601.39 6601.39 914.81 False None None False None False 6039017.5859 0 3596338 130982 None code240 15.117 Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick.complete including cost of materials, labour, usage charges of machinery complete as per specifications. No 2354.1 2354.1 2.0 False None None False None False 4708.2 0 3596339 130982 None code241 15.113 Supplying of Hand gloves. complete Pair 1208.02 1208.02 2.0 False None None False None False 2416.04 0 3596340 130982 None code242 15.114 Supplying of first aid box. complete No 743.4 743.4 2.0 False None None False None False 1486.8 0 3596341 130982 None code243 15.116 Supplying of FIRST AID CHART with lamination. Complete No 495.6 495.6 2.0 False None None False None False 991.2 0 3596342 130982 None code244 Ges SR/SSM 11KV/593/68.17:Caution/Danger Board No 185.85 185.85 6.0 False None None False None False 1115.1 0 3596343 130982 None code245 21-22/Vol-4/Part-B/Lift Irrigation/4.41:Providing and fixing chain link fencing consisting of 3 m long 65 x 65 x 6 mm M.S angles with top 50 cm bent at 30 degree to vertical fixed at 2.5 m intervals in C.C 1 : 3 : 6 proportion using 20 mm down graded coarse aggregate for 70 cm depth, fixing 50 x 50 mm opening 8 gauge G.I chain link mesh upto 1.8 m height of poles using 8 gauge stretcher wire at top and bottom and 30 x 30 x 5 mm M.S angles with bolts /nuts / washers ( 4 bolts for each pole ), fixing 3 rows of 12 gauge ( 4 barbs at 7.5 cm c/c ) G.I barbed wire for top bent portion of poles, including cost of all materials, machinery, labour, excavation of pit, mixing and laying concrete, curing, drilling holes in angles, cleaning angles, painting angles and Chain links with 2 coats of synthetic enamel paint over a coat of primer etc., complete with all lead and lifts. Sqm per Meter 1704.86 1704.86 24.0 False None None False None False 40916.64 0 3596344 130982 None code246 5.20.2 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. No 5648.6 5648.6 1.0 False None None False None False 5648.6 0 3596345 130982 None code247 5.20.2 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto sensitivity on existing wood/ panel board. 63 Amps 4 pole (5.20.3) No 6514.66 6514.66 1.0 False None None False None False 6514.66 0 3596346 130982 None code248 5.12.4 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 200 A No 18893.51 18893.51 1.0 False None None False None False 18893.51 0 3596347 130982 None code249 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.5.19.6 4Way SP &N No 1888.23 1888.23 70.0 False None None False None False 132176.1 0 3596348 130982 None code25 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming (Payment for grouting of joints to be made separately). SRP- Vol-II (62/9.22.2)Size of Tile 600x600 mm Sq CM 1642.91 1642.91 619.44 False None None False None False 1017684.1704 0 3596349 130982 None code250 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.5.19.6 8way SP &N.(5.19.8) Double door. No 2297.1 2297.1 2.0 False None None False None False 4594.2 0 3596350 130982 None code251 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.5.19.6 12way SP &N. (5.19.9) Double door. No 2885.63 2885.63 2.0 False None None False None False 5771.26 0 3596351 130982 None code252 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (Icu = Ics) 5.15.11 160Amps 25kA. No 16660.83 16660.83 4.0 False None None False None False 66643.32 0 3596352 130982 None code253 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter. No 1765.57 1765.57 2.0 False None None False None False 3531.14 0 3596353 130982 None code254 Supplying, fixing and wiring 50/5Amps to 400/5 Amps 5VA burden current transformer. 0.5 accuracy. (5.34) No 696.31 696.31 6.0 False None None False None False 4177.86 0 3596354 130982 None code255 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC 50Hz 12/24v DC (5.38) No 638.08 638.08 12.0 False None None False None False 7656.96 0 3596355 130982 None code256 PWD SR/Vol-2/11.16.1:Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 168.5 168.5 340.0 False None None False None False 57290.0 0 3596356 130982 None code257 12.57 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.12.57 No 5273.18 5273.18 6.0 False None None False None False 31639.08 0 3596357 130982 None code258 Gescom SR/SSM 11KV/61/8.02:8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM Km 92974.56 92974.56 0.04 False None None False None False 3718.9824 0 3596358 130982 None code259 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm GI strip 12.58.1 Mtr 101.59 101.59 20.0 False None None False None False 2031.8 0 3596359 130982 None code26 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-charge. SRP- Vol-II (69/10.2) Rmtr 406.39 406.39 204.91 False None None False None False 83273.3749 0 3596360 130982 None code260 Gescom sr/SSM 11KV/207/32.11: 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) Km 221747.54 221747.54 0.3 False None None False None False 66524.262 0 3596361 130982 None code261 Gescom sr/11KV Labour/176/21.06: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 to 95 Sqmm Km 38581.22 38581.22 0.3 False None None False None False 11574.366 0 3596362 130982 None code262 Vol I/1.14.1:Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1 Cum 126.37 126.37 300.0 False None None False None False 37911.0 0 3596363 130982 None code263 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 (2019-20 SR) No 3.71 3.71 60.0 False None None False None False 222.6 0 3596364 130982 None code264 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 (2019-20 SR) 2.5 sqmm. (6.17.2) No 4.95 4.95 80.0 False None None False None False 396.0 0 3596365 130982 None code265 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 (2019-20 SR) 4.0 sqmm. (6.17.3) No 8.67 8.67 24.0 False None None False None False 208.08 0 3596366 130982 None code266 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 (2019-20 SR) 6 sqmm. (6.17.4) No 8.67 8.67 24.0 False None None False None False 208.08 0 3596367 130982 None code267 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 (2019-20 SR) 10sqmm.(6.17.5) No 9.91 9.91 24.0 False None None False None False 237.84 0 3596368 130982 None code268 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 (2019-20 SR) 16 sqmm. (6.17.6) No 15.41 15.41 12.0 False None None False None False 184.92 0 3596369 130982 None code269 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 (2019-20 SR) 50 sqmm Long Barrel. (6.17.9) No 74.34 74.34 16.0 False None None False None False 1189.44 0 3596370 130982 None code27 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) SRP- Vol-I (18/2.11/a) Kg 110.82 110.82 151607.23 False None None False None False 16801113.2286 0 3596371 130982 None code270 Vol V/191/16.9:onstructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. No 6757.5 6757.5 6.0 False None None False None False 40545.0 0 3596372 130982 None code271 Vol V/10.1.8:Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete 110mm Mtr 509.22 509.22 200.0 False None None False None False 101844.0 0 3596373 130982 None code272 Vol II/09/5.4:(Size stone masonry) Construction of Platform with size stone, cement concrete for errection of Transformer/Metering Cubicle /Heavy equipment. Construction of platform [1.5m x 1.5m x 1.2m] in size srone , for errection of transformer /Heavy equipment including all materials , labour Excavation of [1.5mx1.5mx1m] pit for foundation providing and laying cement concrete 1:4:8 for foundation laid in 10cm thick layers, well compacted curing etc, complete providing and construction of stone masonary 0.9m below ground level and 1.2m above ground level neatly hammer dressed in cement morter 1:6 Providing and Laying cement concrete slab 1.5x1.5x.10mtr with cement concrete of 1:2:4 mix forming & cutting complete , providing pointing to stone masonary in cement morter 1:3 after rackng joint & nisely lining curing etc, plastering the concrete surfaces in cement morter 1:4 including smooth randering curing etc, curing at every stages completely. Cum 7915.97 7915.97 2.7 False None None False None False 21373.119 0 3596374 130982 None code273 Gescom SR/SSM 11KV/398/53.04:LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations up to 25HP/18KW) Each 2948.82 2948.82 1.0 False None None False None False 2948.82 0 3596375 130982 None code274 4.1.1 Fabricating supplying and erecting Swaged tubular Pole of height ...m having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved quality and colour and M.S. base plate of suitable size welded at the bottom of the Pole(as per IS) and 40 mm dia GI/flexible PVC pipe of 1m length fitted to the heavy gauge polycarbonate control box including 5 Way connector of size 167 x 125 x 82 mm for 7.5M Pole/ 200 x 160 x 98 mm for remaining length of Pole with front opening cover, with locking arrangements and suitable capacity MCB/DP switch, The Pole shall be erected in cement concrete work (1:2:4) including excavation and refilling of planting depth of the Pole to the ground level and the coping CC shall be upto 0.6m above ground level as per IS2713-7.Erection of heavy duty Pole on Footpath/median 9m (5m Hb,165.1 mm dia 4.85 mm thick x 2m Hm, 139.7 mm dia 4.50 mm thick x 2m Ht,114.3 mm dia 3.65 mm thick) as per IS 410 SP 32 No 19204.5 19204.5 6.0 False None None False None False 115227.0 0 3596376 130982 None code275 12.8.4 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70 percentage, maximum light intensity should be between 60 degrees to 70 degrees. CCT greeter than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greeter than IK08. Power Factor greeter than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greeter than 130lm/w, nominal CRI greeter than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.LED Streetlight 90 Watts No 10977.54 10977.54 6.0 False None None False None False 65865.24 0 3596377 130982 None code276 Gescom sr/SSM 11KV/198/32.02: 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) Km 98168.44 98168.44 0.6 False None None False None False 58901.064 0 3596378 130982 None code277 Gescom sr/11KV Labour/175/21.05: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm Km 25877.75 25877.75 0.6 False None None False None False 15526.65 0 3596379 130982 None code278 Vol I/1.14.1:Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1 Cum 126.37 126.37 350.0 False None None False None False 44229.5 0 3596380 130982 None code279 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.5 (2019-20 SR)10sqmm. No 9.91 9.91 80.0 False None None False None False 792.8 0 3596381 130982 None code28 KSRB 7.15 :Providing , fabricating, assembling and fixing in position anodized aluminum partions using aluminium section of mat finish or glassy finish in combination of plain grove, single groove, single grove and double grove as per requirements for the frames of overall size 63.5mmx38.1mm. with thickness of 2 mm having section weight, plain sections. 1.054 kg/m, single grove thickness 1.95mm section weight. 1.094kg/m and bottom member 114.3mm x 44.45mm thickness 3.18mm weight 2.646 kg/m aluminium louvers section of size 36.5mmx34.93mm 1.45mm thick section weight 0.429kg/m bottom prortion provided with 12mm thick prelaminated sheet both sides of approved portion viz., 0.9m to 2.13m and top panel with louvers sections; the glass and panels fitted wtih glazing clips of 19mm x 17.3mm of thickness 0.9mm weight 0.13 and top panel with louvers sections; the glass and panels fitted with glazing clips of 19mmx 17.3mm of thickness 0.9mm weight 0.124kg/m aluminium setions anodised 12 to 15 microns, sections treated for removal of any rust and prevention of further rust formation, coated with greasy materials for non adherence of mortars or any other sticky materials ; vertical members embedded in the flooring by making suitable sized holes and fixing with cement mortar, with necesary opening for fixing of door of standard size ( excluding cost of door ) all the frame throughly cleaned, free from rust , scale of dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specification SRP 38/7.15.2 ( Powder Coated ) Sq CM 4049.76 4049.76 9.72 False None None False None False 39363.6672 0 3596382 130982 None code280 Vol V/10.1.8:Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete 110mm Mtr 509.22 509.22 300.0 False None None False None False 152766.0 0 3596383 130982 None code281 11.1 Supplying & fixing - flexible LED Strip Light . W Power consumption in 5 ms length CCT6500 degree K, CRI greeter than 70 percentage. efficacy greeter than 80 lumen per W, life greeter than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver non integrated, with PF greeter than 0.95, power loss should less than 5 percentage of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20 percentage, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved with 2 years Warranty against any manufacturing defect working under standard electrical condition Mtr 1599.54 1599.54 400.0 False None None False None False 639816.0 0 3596384 130982 None code282 3.8 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. Sq CM 0.5 0.5 200000.0 False None None False None False 100000.0 0 3596385 130982 None code283 PWD SR/2023-24/Vol-II/Material Components/A-12/ii/23:Aluminium Composite of approved colour straight portion Sq CM 3717.0 3717.0 20.0 False None None False None False 74340.0 0 3596386 130982 None code284 PWD SR/2023-24/Vol-II/7.64.1.1:Aluminium fluted strips 3.15 mm thick.150 mm wide (but used 50 mm wide hence Rs.557/3=185.66 taken) Mtr 230.02 230.02 150.0 False None None False None False 34503.0 0 3596387 130982 None code285 PWD SR/2023-24/Vol-II/10.15.1:Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete Cum 4942.37 4942.37 15.0 False None None False None False 74135.55 0 3596388 130982 None code286 5.41.4 Supplying and fixing angle iron frame work fabricated out of M.S.angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50 x 100 x 50 x 6 mm C channel (but used 25x50 mm square pipe) hence 0.65 taken Mtr 608.84 608.84 45.0 False None None False None False 27397.8 0 3596389 130982 None code287 KSRB/16-17 (4.29.4) : Providing and removing centering, shuttering structting, propping etc., and removal of form work for flat surface such as suspended floor, roofs, landing, balconies and lides, thickness upto 200mm including cost of all materials, labour complete as per specifications.0 to 7 mtrs Sqm per Meter 1077.93 1077.93 53.64 False None None False None False 57820.1652 0 3596390 130982 None code288 KSRB 16-17 (4.29.6) : Providing and removing centering, shuttering structting, propping etc., and removal of form work for flat surface such as suspended floor, roofs, landing, balconies and lides, thickness upto 200mm including cost of all materials, labour complete as per specifications.0 to 9 mtrs Sqm per Meter 1548.75 1548.75 12.6 False None None False None False 19514.25 0 3596391 130982 None code289 5.47 Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.) 3-120sec setting. Each 2868.28 2868.28 2.0 False None None False None False 5736.56 0 3596392 130982 None code29 Constructing brick maconary inspection chamber of internal dimention 600 X 450 mm, and depth of 600mm ( Inner dimension ) with modular bricks of class designation 75 in Cm 1:6 bed concrete 150mm thick with 1:3:6 with plastering 12 mm thick with CM 1:4.CC 1:2:4 cooping 75mm thick for fixing CI cover & frame etc.(excluding cost of CI frame & cover). SRP- Vol-V 16.9/191 Each 5936.04 5936.04 6.0 False None None False None False 35616.24 0 3596393 130982 None code290 5.13.2 Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.40 A Each 2797.66 2797.66 1.0 False None None False None False 2797.66 0 3596394 130982 None code291 5.13.3 Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.60 A Each 7372.05 7372.05 1.0 False None None False None False 7372.05 0 3596395 130982 None code292 PWD SR/2023-24/Vol-I/A-40/77:Mild Steel Tubes 14 guage 1" x 1" squire pipe Kg 74.34 74.34 343.35 False None None False None False 25524.639 0 3596396 130982 None code293 PWD SR/2023-24/Vol-III/8.7/801:Direction and Place Identification Signs upto 0.9 m2 Size Board.Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing Sqm per Meter 11163.39 11163.39 12.0 False None None False None False 133960.68 0 3596397 130982 None code294 PWD SR/2023-24/Vol-II/11.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 700.03 700.03 240.0 False None None False None False 168007.2 0 3596398 130982 None code295 PWD SR/2023-24/Vol-II/Material Components/A-12/ii/23:Aluminium Composite of approved colour straight portion. Sqm 3717.0 3717.0 10.0 False None None False None False 37170.0 0 3596399 130982 None code296 PWD SR/2023-24/Vol-III/8.43:Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than19 +/- 2 mm and height not less than30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be bydrilling holes on the road for the shanks to go inside,without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. Each 452.23 452.23 140.0 False None None False None False 63312.2 0 3596400 130982 None code297 PWD SR/2023-24/Vol-III/8.45:Providing Vertical Delineator having wide angle cube corner micro prismatic non metallic reflective sheeting confirming to Type XI of ASTM D4956 -09 with White Color and Red Color combination and having minimum of retro reflective exposed area of 125 Sq CM on top slots and 35 cm2 on bottom slots and no edges shall be exposed for tampering. This tubular delineator shall have a core and shell construction, shell shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body and the inner core shall consist of powder coated or painted Mild steel of minimum thickness 1.0mm.and coreshell structure shall be of height not less than 800 mm above the ground and width not less than 80 mm. The metallic core of the delineator shall extend 300mm beyond the shell length from bottom for installing in the ground. The extended portion shall have slots to insert anchoring rods for enhancing the concrete grip. The logo of the manufacturer shall be embossed on either side of the body in the injection molding process.The engineering thermoplastic used for making the delineator body shall have minimum initial mechanical properties of be fixed by a combination of epoxy adhesive and grouting as per MoRTH specification 806 Each 3593.1 3593.1 12.0 False None None False None False 43117.2 0 3596401 130982 None code298 PWD SR/2023-24/Vol-III/8.15:Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level,uniform and free from streaks and holes. Sqm per Meter 656.67 656.67 250.0 False None None False None False 164167.5 0 3596402 130982 None code299 PWD SR/2023-24/Vol-III/8.53:Providing & fixing Polymer rubberised factory made Black & Yellow coloured Speed retarders/Breakers with width 350mm & Height 50mm as per IRC 99:2018 with load carrying capacity upto 30t in local streets, parking arena and in areas with speed limit of 20 kmph as per direction of Engineer in-charge. Mtr 1115.1 1115.1 50.0 False None None False None False 55755.0 0 3596403 130982 None code30 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will makehis own arrangements for procuring water for testing) etc.Note: Upto 110mm dia Coil shall be used. SRP- Vol-V 94/9.1.4 Rmtr 581.09 581.09 120.0 False None None False None False 69730.8 0 3596404 130982 None code300 Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note: 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards, with BSI / NFS mark. 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note: Refer the NNEXURE : F for Detailed Specification of Each components 100 LPH : Cabin Type VOL-5/21.1.3 Each 116466.0 116466.0 1.0 False None None False None False 116466.0 0 3596405 130982 None code301 11.4.1 Supplying of recess mounting non integrated type LED down light. W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI greeter than 70 percentage. efficacy greeter than 100 lumen per W, 120degree beam spread, life greeter than 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF greeter than 0.95, power loss should less than 5 percentage of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20 percentage, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.5-6W Each 997.39 997.39 3.0 False None None False None False 2992.17 0 3596406 130982 None code302 13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. Each 151.15 151.15 3.0 False None None False None False 453.45 0 3596407 130982 None code303 Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992,IS 4127 with latest amendments, including conveying to work site,caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing.150 mm dia. pipes SRP- Vol-V 187/16.1.2 Rmtr 719.85 719.85 80.0 False None None False None False 57588.0 0 3596408 130982 None code304 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.SRP- Vol-II (50/8.51) Sq CM 123.9 123.9 1904.59 False None None False None False 235978.701 0 3596409 130982 None code305 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-II (45/8.25) Sq CM 169.74 169.74 1904.59 False None None False None False 323285.1066 0 3596410 130982 None code306 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.. (Apex Paint) SRP- Vol-II (45/8.28) Sq CM 110.27 110.27 1783.21 False None None False None False 196634.5667 0 3596411 130982 None code307 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply incl all CPVC plain & brass threaded fittings. This incl jointing of pipes and fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete 50mm dia as pe direction of Engineer in charge External work SRP- Vol-II (123/13.33.5) 40 mm Mtr 591.0 591.0 90.0 False None None False None False 53190.0 0 3596412 130982 None code308 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply incl all CPVC plain & brass threaded fittings. This incl jointing of pipes and fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete 50mm dia as pe direction of Engineer in charge External work SRP- Vol-II (123/13.33.3) 25 mm Mtr 366.74 366.74 80.0 False None None False None False 29339.2 0 3596413 130982 None code309 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply incl all CPVC plain & brass threaded fittings. This incl jointing of pipes and fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete 50mm dia as pe direction of Engineer in charge External work SRP- Vol-II (123/13.33.2) 20 mm Mtr 268.86 268.86 70.0 False None None False None False 18820.2 0 3596414 130982 None code310 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply incl all CPVC plain & brass threaded fittings. This incl jointing of pipes and fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete 50mm dia as pe direction of Engineer in charge External work SRP- Vol-II (123/13.33.1) 15 mm Mtr 205.67 205.67 50.0 False None None False None False 10283.5 0 3596415 130982 None code311 White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap SRP- Vol-II (133/14.7.7) Nos 2600.66 2600.66 2.0 False None None False None False 5201.32 0 3596416 130982 None code312 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. SRP- Vol-II (126/14.13.2) Nos 2888.1 2888.1 3.0 False None None False None False 8664.3 0 3596417 130982 None code313 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : SRP- Vol-II (128/14.32.3) Unit 1320.77 1320.77 2.0 False None None False None False 2641.54 0 3596418 130982 None code314 Providing and fixing C I Nahani trap of approved make confirming to ISI specifications and construction of cistern in CC 1:2:4 as per directions (Inclusive of cost of materials and fixtures) 12.5 cms x 7.5 cms SRP 90 / 12.113.2 Each 336.3 336.3 2.0 False None None False None False 672.6 0 3596419 130982 None code315 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 15 mm nominal bore SRP- Vol-II (115/13.5.1) Nos 366.74 366.74 10.0 False None None False None False 3667.4 0 3596420 130982 None code316 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 40 mm nominal bore SRP- Vol-II (115/13.4.3)) Nos 869.77 869.77 2.0 False None None False None False 1739.54 0 3596421 130982 None code317 Providing and fixing brass stop cock of approved quality 15 mm nominal bore SRP- Vol-II (115/13.3.1) Nos 370.46 370.46 8.0 False None None False None False 2963.68 0 3596422 130982 None code318 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation com plete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.SRP- Vol-II (76/11.6.3) Sq CM 2818.72 2818.72 635.38 False None None False None False 1790958.3136 0 3596423 130982 None code319 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. SRP- Vol-II (60/9.11) Sq CM 1101.47 1101.47 28.68 False None None False None False 31590.1596 0 3596424 130982 None code320 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. SRP- Vol-II (65/9.38) Sq CM 1724.68 1724.68 92.16 False None None False None False 158946.5088 0 3596425 130982 None code321 Supplying and fixing MS Chairs & 3 seater of approved qulaity including fixing in flooring drilling to the suitable holes grouting complete as per direction of Engineer in charge of work complete as per specifications with all lead and lift. (Approved rate) Nos 6490.0 6490.0 50.0 False None None False None False 324500.0 0 3596426 130982 None code322 Hydraulic Excavator of 0.9 m3 bucket (J.C.B excavator) Levelling the ground SRP- Vol-I (A-45/50) Hour 1672.65 1672.65 12.0 False None None False None False 20071.8 0 3596427 130982 None code323 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. SRP- Vol-I (7/1.8) Cum 587.28 587.28 276.0 False None None False None False 162089.28 0 3596428 130982 None code324 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. SRP- Vol-III (24/4.27) Cum 3170.6 3170.6 46.0 False None None False None False 145847.6 0 3596429 130982 None code325 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing.SRP- Vol-III (43/6.1)complete in C.C. 1:6:12 prop ) Cum 6095.88 6095.88 46.0 False None None False None False 280410.48 0 3596430 130982 None code326 Construction of M40 grade un-reinforced,Cement Concrete Pavement with OPC/PPC/PSC dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing SRP- Vol-III (43/6.2) Cum 11226.57 11226.57 92.0 False None None False None False 1032844.44 0 3596431 130982 None code327 Supplying, fitting and placing un-coated Mild steel reinforcement complete in foundation as per drawing and technical specification. SRP- Vol-I (18/2.12) Kg 91.33 91.33 3450.0 False None None False None False 315088.5 0 3596432 130982 None code328 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will makehis own arrangements for procuring water for testing) etc.Note: Upto 110mm dia Coil shall be used. SRP- Vol-V 94/9.1.4 Rmtr 581.09 581.09 180.0 False None None False None False 104596.2 0 3596433 130982 None code329 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes andspecials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 SRP- Vol-V 134/1.7) Rmtr 509.22 509.22 175.0 False None None False None False 89113.5 0 3596434 130982 None code330 Korean truff (Bijapur BS Approved Rate) Sq CM 206.5 206.5 50.0 False None None False None False 10325.0 0 3596435 130982 None code331 Providing & supplying of plants from forest department of plants size 14" x 20" with supporting guard stick including transportation loading unloading placeing the plants in pits of 1 Mtr x 1 Mtr x 1 Mtr of size pits and refiling of required quantity and watering etc., complete. Each 118.0 118.0 50.0 False None None False None False 5900.0 0 3596436 130982 None code332 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (15/2.5.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8412.76 8412.76 12.48 False None None False None False 104991.2448 0 3596437 130982 None code333 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 12321.85 12321.85 4.52 False None None False None False 55694.762 0 3596438 130982 None code334 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 12293.79 12293.79 0.45 False None None False None False 5532.2055 0 3596439 130982 None code335 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot ressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991.from manufacturer complete as per spcification.SRP- Vol-II (106/12.57.4) 35 mm thick Both side teak Sq CM 5615.14 5615.14 9.45 False None None False None False 53063.073 0 3596440 130982 None code336 Providing and placing on terrace ( at all floor levels ) polyethylene water storage tanks,IS : 12701 marked,with cover and suitable locking arrangement and making necessary holes for for inlet,oulet and overflow pipes but without fittings and the base support for tank. SRP- Vol-II (12/13.34) Ltr 11.15 11.15 2000.0 False None None False None False 22300.0 0 3596441 130982 None code337 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required. SRP- Vol-II (123/14.3.2) W.C. pan with ISI marked black solid plastic seat and lid. Each 7192.39 7192.39 2.0 False None None False None False 14384.78 0 3596442 130982 None code338 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :VOL II 124/14.5.1 Each 10707.43 10707.43 2.0 False None None False None False 21414.86 0 3596443 130982 None code339 Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm SRP- Vol-II (134/14.13.1) Each 1769.29 1769.29 6.0 False None None False None False 10615.74 0 3596444 130982 None code340 Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification.SRP- Vol-II (65/9.40) Sq CM 1154.74 1154.74 167.0 False None None False None False 192841.58 0 3596445 130982 None code341 Hydraulic Excavator of 0.9 m3 bucket (J.C.B excavator) Levelling the ground SRP- Vol-I (A-45/50) Hour 1672.65 1672.65 30.0 False None None False None False 50179.5 0 3596446 130982 None code342 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).SRP- Vol-I (17/2.2.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 13143.31 13143.31 14.06 False None None False None False 184794.9386 0 3596447 130982 None code343 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-II (41/8.2.1) Sq CM 365.5 365.5 2008.27 False None None False None False 734022.685 0 3596448 130982 None code344 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-II (41/8.1.1) Sq CM 315.94 315.94 1333.21 False None None False None False 421214.3674 0 3596449 130982 None code345 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 14557.54 14557.54 59.4 False None None False None False 864717.876 0 3596450 130982 None code346 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators,providing weep holes wherever necesary, including all lead & lifts, costof all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).SRP- Vol-I (17/2.4.1) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Cum 8013.89 8013.89 5.99 False None None False None False 48003.2011 0 3596451 130982 None code347 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 26104.01 26104.01 114.73 False None None False None False 2994913.0673 0 3596452 130982 None code348 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 12844.89 12844.89 309.96 False None None False None False 3981402.1044 0 3596453 130982 None code349 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 12416.72 12416.72 0.27 False None None False None False 3352.5144 0 3596454 130982 None code350 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot ressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991.from manufacturer complete as per spcification.SRP- Vol-II (106/12.57.4) 35 mm thick Both side teak Sq CM 5671.3 5671.3 7.56 False None None False None False 42875.028 0 3596455 130982 None code351 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.SRP- Vol-II (100/12.12) Cum 155425.13 155425.13 0.21 False None None False None False 32639.2773 0 3596456 130982 None code352 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. SRP- Vol-II (105/12.54) Rmtr 397.94 397.94 22.8 False None None False None False 9073.032 0 3596457 130982 None code353 VOL II SRP 106/12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges (both side prelam) Sq CM 2960.78 2960.78 6.3 False None None False None False 18652.914 0 3596458 130982 None code354 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.SRP- Vol-II (85/34A) Kg 210.22 210.22 189.0 False None None False None False 39731.58 0 3596459 130982 None code355 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.SRP- Vol-II (14/6.8) Cum 9972.32 9972.32 344.47 False None None False None False 3435165.0704 0 3596460 130982 None code356 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as perspecifications and as per directions of Engineer-in-charge. SRP- Vol-II (41/8.2.1) Sq CM 369.16 369.16 4230.32 False None None False None False 1561664.9312 0 3596461 130982 None code357 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-II (41/8.1.1) Sq CM 319.1 319.1 3014.59 False None None False None False 961955.669 0 3596462 130982 None code358 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.SRP-Vol-II (11.35.1.2/86) Kg 611.92 611.92 61.67 False None None False None False 37737.1064 0 3596463 130982 None code359 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications.SRP-Vol-II (11.37.2/82) Sq CM 1465.38 1465.38 10.8 False None None False None False 15826.104 0 3596464 130982 None code360 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.SRP- Vol-II (83/11.28) Kg 707.03 707.03 212.25 False None None False None False 150067.1175 0 3596465 130982 None code361 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. SRP- Vol-II (64/9.30) Sq CM 6667.4 6667.4 390.79 False None None False None False 2605553.246 0 3596466 130982 None code362 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-charge. SRP- Vol-II (69/10.2) Rmtr 410.45 410.45 120.0 False None None False None False 49254.0 0 3596467 130982 None code363 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming (Payment for grouting of joints to be made separately). SRP- Vol-II (62/9.22.2)Size of Tile 600x600 mm Sq CM 1659.33 1659.33 599.68 False None None False None False 995067.0144 0 3596468 130982 None code364 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) SRP- Vol-I (18/2.11/a) Kg 111.93 111.93 52566.21 False None None False None False 5883735.8853 0 3596469 130982 None code365 Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories,sealing shall be done with necessary rods etc., complete SRP- Vol-II (71/10.15.1) Sq CM 4991.78 4991.78 105.0 False None None False None False 524136.9 0 3596470 130982 None code366 Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ eams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval fromstructural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts,washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glasspanel inside the SS channel shall be measured.SRP- Vol-II (160/18.7) Sq CM 9951.05 9951.05 45.0 False None None False None False 447797.25 0 3596471 130982 None code367 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.SRP- Vol-II (50/8.51) Sq CM 125.13 125.13 4230.32 False None None False None False 529339.9416 0 3596472 130982 None code368 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-II (45/8.25) Sq CM 171.44 171.44 4230.32 False None None False None False 725246.0608 0 3596473 130982 None code369 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.. (Apex Paint) SRP- Vol-II (45/8.28) Sq CM 111.36 111.36 3014.59 False None None False None False 335704.7424 0 3596474 130982 None code370 Providing and placing on terrace ( at all floor levels ) polyethylene water storage tanks,IS : 12701 marked,with cover and suitable locking arrangement and making necessary holes for for inlet,oulet and overflow pipes but without fittings and the base support for tank. SRP- Vol-II (12/13.34) Ltr 11.25 11.25 2000.0 False None None False None False 22500.0 0 3596475 130982 None code371 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply incl all CPVC plain & brass threaded fittings. This incl jointing of pipes and fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete 50mm dia as pe direction of Engineer in charge External work 40mm SRP- Vol-II (123/13.33.5) Mtr 596.91 596.91 90.0 False None None False None False 53721.9 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1721805515000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1721805515000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1721805515000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1721805515000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1721805515000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1721805525000 0 None None ELIGIBILITY Estimated Rates inclusive of all applicable taxes including GST. None 1721805529000 0 None None ELIGIBILITY The bidder shall quote their rates inclusive of all applicable taxes and inclusive of GST. None 1721805538000 0 None None ELIGIBILITY GST will not be paid separately. It is added in the individual items rates. None 1721805545000 0 None None ELIGIBILITY TERMS AND CONDITIONS AS PER TENDER NOTIFICATION None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Upload a Scanned copy of attested Valid contractors Registration Certificate as per tender notification Eligibility Criteria Others Should be valid Class-I registered Civil Prime Contractor in Karnataka. createdTs version createdDate modifiedDate documentName None None None None Others -- Should be valid Class-I registered Civil Prime Contractor in Karnataka. None None None None Upload a Scanned copy of Single work of RCC Frame Structure BUILDING with minimum built-up area as per tender notification Eligibility Criteria Others Single work of RCC Frame Structure BUILDING with minimum built-up area createdTs version createdDate modifiedDate documentName None None None None Others -- Single work of RCC Frame Structure BUILDING with minimum built-up area None None None None Upload a Scanned copy of work done one work of similar nature of building work as per tender notification Eligibility Criteria Others Work Done Certificate of completion createdTs version createdDate modifiedDate documentName None None None None Others -- Work Done Certificate of completion None None None None Upload a Scanned copy of quantities of work done as per tender notification Eligibility Criteria Others Minimum Quantity wise work done createdTs version createdDate modifiedDate documentName None None None None Others -- Minimum Quantity wise work done None None None None Upload a Scanned copy of Annual Financial Turnover audited balance sheet and profit & loss accounts statement certified by a Chartered Accountant as per tender notification Eligibility Criteria Others Annual Financial Turnover createdTs version createdDate modifiedDate documentName None None None None Others -- Annual Financial Turnover None None None None Upload a Scanned copy of Qualify for award of this contract the Tenderer has to furnish Liquid assets statement or availability of credit facilities as per tender notification Eligibility Criteria Others Qualify for award of this contract the Tenderer has to furnish Liquid assets statement createdTs version createdDate modifiedDate documentName None None None None Others -- Qualify for award of this contract the Tenderer has to furnish Liquid assets statement None None None None Upload a Scanned copy of To Qualify for award of this Contract the assessed available tender capacity of the tenderer should be more than the amount put to tender as per tender notification Eligibility Criteria Others Qualify for award of this Contract the assessed available tender capacity createdTs version createdDate modifiedDate documentName None None None None Others -- Qualify for award of this Contract the assessed available tender capacity None None None None Upload a Scanned copy of self declaration certificate as per tender notification Eligibility Criteria Others Performance security for unbalance Rates createdTs version createdDate modifiedDate documentName None None None None Others -- Performance security for unbalance Rates
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate False Technical Bid Company Registration Certificate False Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1721808515000 version 0 createdDate None modifiedDate None blockNumber O/o the EE KKRTC Near SP Circle Ballari street None city Ballari state Karnataka pin 583102
tenderRecallDTO	None