| 1721817971000 | 0 | None | None | Buildings | construction of Handicap toilet in ground of maski police station of maski town limit | 215294.67 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3607939 | 131135 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work | Cum | 126.38 | 126.38 | 4.32 | False | None | None | False | None | False | 545.9616 | 0 | | 3607940 | 131135 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm hickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. | Cum | 7683.04 | 7683.04 | 0.612 | False | None | None | False | None | False | 4702.02048 | 0 | | 3607941 | 131135 | None | code03 | Providing Random rubble masonry with hard stone in foundation and
plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with | Cum | 6952.03 | 6952.03 | 1.2 | False | None | None | False | None | False | 8342.436 | 0 | | 3607942 | 131135 | None | code04 | providing size stone mesonry with hard stone in foundation and plinth with cement mortar 1:6 ( 1 CEMENT : 6 COURSE SAND ) | Cum | 7915.97 | 7915.97 | 1.092 | False | None | None | False | None | False | 8644.23924 | 0 | | 3607943 | 131135 | None | code05 | Filling available excavated earth ( excluding rock ) in trenches , plinth ,sides of foundations and other similar works etc. in layers not exceeding 20 cm in depth , consolidating each deposited layer by ramming and watering , lead upto 50 m and lift upto 1.50m. | Cum | 329.57 | 329.57 | 5.904 | False | None | None | False | None | False | 1945.78128 | 0 | | 3607944 | 131135 | None | code06 | Providing and laying in position Reinforced cement concrete for all super structures of building, road works, watrworks irrigation works & super structures works of bridges, from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M20 Design Mix Using 20 mm and downsize crushed coarse aggregate | Cum | 8214.57 | 8214.57 | 1.35 | False | None | None | False | None | False | 11089.6695 | 0 | | 3607945 | 131135 | None | code07 | TMT Steel Supplying, Fitting and Placing TMT Fe 500 /550 D , steel reinforcement as per Drawing and Technical Specifications. For Building works | Tonne | 110837.22 | 110837.22 | 0.053 | False | None | None | False | None | False | 5874.37266 | 0 | | 3607946 | 131135 | None | code08 | providing brickwork with common burnt clay non modular bricks of class designation 3.50 in superstructure above plinth level in all shapes and sizes in cement mortar 1:6 ( 1 cement :6 coarse sand ) including cost of all materials , labours, scaffolding , usage charges of machinary and other incidental charges complete as per the direction of engineer in charge of work | Cum | 8360.77 | 8360.77 | 5.338 | False | None | None | False | None | False | 44629.79026 | 0 | | 3607947 | 131135 | None | code09 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.INTERIOR PLASTER | Sqm | 298.6 | 298.6 | 22.97 | False | None | None | False | None | False | 6858.842 | 0 | | 3607948 | 131135 | None | code10 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 315.95 | 315.95 | 4.8 | False | None | None | False | None | False | 1516.56 | 0 | | 3607949 | 131135 | None | code11 | Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 365.51 | 365.51 | 23.03 | False | None | None | False | None | False | 8417.6953 | 0 | | 3607950 | 131135 | None | code12 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) | Sqm | 195.76 | 195.76 | 50.8 | False | None | None | False | None | False | 9944.608 | 0 | | 3607951 | 131135 | None | code13 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 1370.33 | 1370.33 | 4.8 | False | None | None | False | None | False | 6577.584 | 0 | | 3607952 | 131135 | None | code14 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete.PWD CSR 2023-24, Vol-II, P. No. 71, I. No. 10.14 | Sqm | 1370.33 | 1370.33 | 9.69 | False | None | None | False | None | False | 13278.4977 | 0 | | 3607953 | 131135 | None | code15 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications | Kg | 700.04 | 700.04 | 40.36 | False | None | None | False | None | False | 28253.6144 | 0 | | 3607954 | 131135 | None | code16 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc | Sqm | 226.74 | 226.74 | 7.35 | False | None | None | False | None | False | 1666.539 | 0 | | 3607955 | 131135 | None | code17 | Providing and fixing factory made PVC DOOR FRAME of size 50x47 mm with a wall thickness of 5 mm , made out of extruded 5mm rigid PVC foam sheet metered cut at corners &jointed 2 nos of 150mm long brackets of 15x15mm M.S. square tube , the entire door frame to be reinforced with 19x19 mm M.S. Square tube of 19 gauge .the door frame to be fixed the wll using M.S.screws of 65/80 mm size complete as per manufacturers specifications and direction of engineer incharge . | Mtr | 394.0 | 394.0 | 5.7 | False | None | None | False | None | False | 2245.8 | 0 | | 3607956 | 131135 | None | code18 | Providing &fixing 30mm thick factory made rigid foam Prelam Panelled door shutters made from M.S. tube of 19x19 mm , 19 gauge for stiles and 15x15 mm for top and bottom rails , covered with het moulded prelaminated PVC C channel of 5 mm thick sheet and 30x50 mm wide to form stiles 75 mm thick and 75 mm wide prelaminated pvc sheets for top rails , lock rail , and bottom rail on either side and &5 mm thick , 20 mm wide cross PVC sheet as gap insert for top rail and botom rail , panelling of 5mm thick PVC sheet prelaminated on either side fitted in M.S. FRAME , SEALED TO STILS &RAILS WITH pvc DESIGNER Bearing on either side &joined together with solvent cement adhesive etc. complete manufacture as specificaton and direction of engineer in charge fixed to frames wiith no s of 75 mm aluminium hinges .
on both side lamed | Sqm | 2931.47 | 2931.47 | 2.31 | False | None | None | False | None | False | 6771.6957 | 0 | | 3607957 | 131135 | None | code19 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 1 | Nos | 7405.5 | 7405.5 | 1.0 | False | None | None | False | None | False | 7405.5 | 0 | | 3607958 | 131135 | None | code20 | Supplying and erection of RCC rings for 0.30 m depth using m20 grade concrete using using clean graded granite or trap or jelly of approved uality 20mm and down size well compacted including centring,formwork,and plastering for both faces with CM 1:3 proportion as per design using 6.50mm MS coil at rate of 10 kgs per ring including cost of steel and fabrication , bailing out of water , corrosion etc. complete for 1.20 m dia clear rings of steining thickness of 0.075 mm uptio 18 M depth | Nos | 1527.69 | 1527.69 | 6.0 | False | None | None | False | None | False | 9166.14 | 0 | | 3607959 | 131135 | None | code21 | Supplying and erection of RCC rings for 0.30 m depth using m20 grade concrete using using clean graded granite or trap or jelly of approved uality 20mm and down size well compacted including centring,formwork,and plastering for both faces with CM 1:3 proportion as per design using 6.50mm MS coil at rate of 10 kgs per ring including cost of steel and fabrication , bailing out of water , corrosion etc. complete for 1.20 m dia clear rings of steining thickness of 0.075 mm uptio 18 M depth For Septic tank Cap | Nos | 708.0 | 708.0 | 1.0 | False | None | None | False | None | False | 708.0 | 0 | | 3607960 | 131135 | None | code22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Nos | 3818.6 | 3818.6 | 1.0 | False | None | None | False | None | False | 3818.6 | 0 | | 3607961 | 131135 | None | code23 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm | Nos | 2138.51 | 2138.51 | 1.0 | False | None | None | False | None | False | 2138.51 | 0 | | 3607962 | 131135 | None | code24 | Concealed PVC Conduit System Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2mm thick ( | Mtr | 85.49 | 85.49 | 20.0 | False | None | None | False | None | False | 1709.8 | 0 | | 3607963 | 131135 | None | code25 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Ltr | 11.15 | 11.15 | 1000.0 | False | None | None | False | None | False | 11150.0 | 0 | | 3607964 | 131135 | None | code26 | PVC/metal conduit Deep Junction Box Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box (P.no.2.it.no.1.5) (PWD CSR for Electrical Works for the Year 2023-24) | Nos | 60.71 | 60.71 | 2.0 | False | None | None | False | None | False | 121.42 | 0 | | 3607965 | 131135 | None | code27 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4 Sqmm (P.no.5.it.no.2.3.4) | Mtr | 78.06 | 78.06 | 10.0 | False | None | None | False | None | False | 780.6 | 0 | | 3607966 | 131135 | None | code28 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps two way. | Nos | 205.67 | 205.67 | 2.0 | False | None | None | False | None | False | 411.34 | 0 | | 3607967 | 131135 | None | code29 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 25mm dia., 10 kg/sqcm & class 5 | Mtr | 59.47 | 59.47 | 25.0 | False | None | None | False | None | False | 1486.75 | 0 | | 3607968 | 131135 | None | code30 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 | Mtr | 509.23 | 509.23 | 10.0 | False | None | None | False | None | False | 5092.3 | 0 |
|