createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1721828233220 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 7500.00 emd 2434000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 26-08-2024 16:00:00 tenderQueryClose 17-08-2024 15:00:00 technicalBidOpen 27-08-2024 16:30:00 publishedDate 25-07-2024 12:18:31 publishedByPost EWHFWD_CE_CEOFF_BNG publishedByUser KPE16838 - BALEKATTE KUMARASWAMY PAVITHRA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 19-08-2024 11:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Assistant Engineer splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08029557023 mobileNumber 9449843375 tenderSupplierList None
tenderSchedule	createdTs 1721828233248 version 7 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT541 title Construction of Primary Health center (H type) at 1)Mudbull in Shahapur taluk 2)Mudnoor, 3)Malaghathi, 4)Narayanapur, 5)Khanpur SH, 6)Heggandoddi and 7)Thinthini in Shorapur taluk of Yadgir District. description Construction of Primary Health center (H type) at 1)Mudbull in Shahapur taluk 2)Mudnoor, 3)Malaghathi, 4)Narayanapur, 5)Khanpur SH, 6)Heggandoddi and 7)Thinthini in Shorapur taluk of Yadgir District. category WORKS categoryText Works ecv 243392083.79 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3521 locationName EWHFWD Chief Engineer Office Bengaluru provisionalAmount 280000000.0 groupOverheadTotal 0.0 fileNumber KKRDB-2
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1721828233000 0 None None Buildings MUDABULL IN SHAHAPUR TALUK OF YADGIR DISTRICT. (CIVIL) 27665191.48 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3609362 131234 None CSR:V-3 PAGE NO 9 Itm 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work 100 Sqm 486.93 486.93 17.49 False None None False None False 8516.4057 0 3609363 131234 None V-1 page 8 itm 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 117.71 117.71 768.64 False None None False None False 90476.6144 0 3609364 131234 None V-1page 8 itm 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 126.38 126.38 1311.57 False None None False None False 165756.2166 0 3609365 131234 None V-1page 8 itm 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 449.76 449.76 230.53 False None None False None False 103683.1728 0 3609366 131234 None V-3page 3 A Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 167.27 167.27 225.13 False None None False None False 37657.4951 0 3609367 131234 None V-2page5 itm 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 146.2 146.2 774.16 False None None False None False 113182.192 0 3609368 131234 None V-1pg7 itm1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 329.57 329.57 807.35 False None None False None False 266078.3395 0 3609369 131234 None V-1page7vitm1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 587.29 587.29 728.89 False None None False None False 428069.8081 0 3609370 131234 None V-1page 15 itm2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7420.37 7420.37 161.37 False None None False None False 1197425.1069 0 3609371 131234 None V-1page15 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR FOOTING ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8478.33 8478.33 177.95 False None None False None False 1508718.8235 0 3609372 131234 None V-1page16 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatess FOR PEDESTAL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8635.33 8635.33 13.4 False None None False None False 115713.422 0 3609373 131234 None V-1page15itm 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR COLUMNS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 55.14 False None None False None False 794755.4274 0 3609374 131234 None V-3page135itm15.4 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 252.76 252.76 13.0 False None None False None False 3285.88 0 3609375 131234 None V-2page55 itm 8.16.a Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1533.88 1533.88 13.81 False None None False None False 21182.8828 0 3609376 131234 None V-1page18itm2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. - Buildings ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Tonne 110837.22 110837.22 50.82 False None None False None False 5632747.5204 0 3609377 131234 None 18-19SR ITM4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No KBS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 38.94 38.94 145.02 False None None False None False 5647.0788 0 3609378 131234 None DATA RATE Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 86.14 86.14 145.02 False None None False None False 12492.0228 0 3609379 131234 None V-2PAGE 9 ITM5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7915.97 7915.97 8.76 False None None False None False 69343.8972 0 3609380 131234 None V-2PAGE 14 ITM 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1623.09 1623.09 1313.93 False None None False None False 2132626.6437 0 3609381 131234 None V-2page 14 itm 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1367.86 1367.86 171.24 False None None False None False 234232.3464 0 3609382 131234 None V-2 page100 itm 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 122431.79 122431.79 1.2 False None None False None False 146918.148 0 3609383 131234 None V-2 page 105 itm 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1258.82 1258.82 32.0 False None None False None False 40282.24 0 3609384 131234 None 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 681.45 681.45 64.0 False None None False None False 43612.8 0 3609385 131234 None 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 464.63 464.63 32.0 False None None False None False 14868.16 0 3609386 131234 None 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 64.0 False None None False None False 11894.4 0 3609387 131234 None 22.15.9 PProviding and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 86.73 86.73 128.0 False None None False None False 11101.44 0 3609388 131234 None 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 123.9 123.9 32.0 False None None False None False 3964.8 0 3609389 131234 None 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1303.43 1303.43 32.0 False None None False None False 41709.76 0 3609390 131234 None V-2page69 itm 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 74.34 74.34 192.0 False None None False None False 14273.28 0 3609391 131234 None 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 168.45 False None None False None False 10853.2335 0 3609392 131234 None V-2page105 itm 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4115.96 4115.96 74.84 False None None False None False 308038.4464 0 3609393 131234 None V-2page109 itm 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 8343.43 8343.43 69.39 False None None False None False 578950.6077 0 3609394 131234 None V-2page109 itm 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 7085.84 7085.84 6.84 False None None False None False 48467.1456 0 3609395 131234 None V-2page 86itm11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 208.15 208.15 1600.83 False None None False None False 333212.7645 0 3609396 131234 None V-2page 111itm 12.93.1 Providing and fixing factory made single extruded WPC (WoodPolymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Size 62 x 100mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work m 869.78 869.78 64.35 False None None False None False 55970.343 0 3609397 131234 None V-2page84 itm 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kgs 168.5 168.5 1724.91 False None None False None False 290647.335 0 3609398 131234 None V-2page 41itm 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 386.57 386.57 1763.82 False None None False None False 681839.8974 0 3609399 131234 None V-2page 43 itm 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 261.43 261.43 1176.83 False None None False None False 307658.6669 0 3609400 131234 None V-2page50 itm 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 123.9 123.9 2919.03 False None None False None False 361667.817 0 3609401 131234 None V-2page42itm 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 432.41 432.41 975.48 False None None False None False 421807.3068 0 3609402 131234 None V-2page41 itm 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 438.61 438.61 163.05 False None None False None False 71515.3605 0 3609403 131234 None 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 2013.85 False None None False None False 94812.058 0 3609404 131234 None 10.5.2 Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 254.88 254.88 13.0 False None None False None False 3313.44 0 3609405 131234 None V-2page 54itm 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 628.05 False None None False None False 40465.2615 0 3609406 131234 None V-2page61itm 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1455.83 1455.83 580.89 False None None False None False 845677.0887 0 3609407 131234 None V-2page59 itm9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 991.2 991.2 71.5 False None None False None False 70870.8 0 3609408 131234 None V-2page63 itm 9.32 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3199.1 3199.1 34.54 False None None False None False 110496.914 0 3609409 131234 None V-2page 4 itm 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 365.51 365.51 316.07 False None None False None False 115526.7457 0 3609410 131234 None V-2page 60 itm 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1101.47 1101.47 59.14 False None None False None False 65140.9358 0 3609411 131234 None V-2page65 itmv9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1795.31 1795.31 259.57 False None None False None False 466008.6167 0 3609412 131234 None V-2 page85 itm11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 700.04 700.04 357.82 False None None False None False 250488.3128 0 3609413 131234 None V-2 page 48itm 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 157.35 157.35 2741.14 False None None False None False 431318.379 0 3609414 131234 None V-2page 46itm8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 193.28 193.28 759.66 False None None False None False 146827.0848 0 3609415 131234 None V-2page47 itm8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 61.95 61.95 96.21 False None None False None False 5960.2095 0 3609416 131234 None V-2page48 itm 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 142.49 142.49 76.23 False None None False None False 10862.0127 0 3609417 131234 None V-2page47itm 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 65.67 65.67 179.6 False None None False None False 11794.332 0 3609418 131234 None 8.82 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 838.8 838.8 179.6 False None None False None False 150648.48 0 3609419 131234 None V-2page64itm 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2044.35 2044.35 17.32 False None None False None False 35408.142 0 3609420 131234 None V-2page77 itm 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5548.24 5548.24 5.25 False None None False None False 29128.26 0 3609421 131234 None 15.12 Newly Constructed Roof/Podium with PU Waterproof coating Above 500 m2. Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids 85%, Tensile strength 2 Mpa as per ASTM D 412, Elongation at break 400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness 55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo textile over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1443.44 1443.44 726.5 False None None False None False 1048659.16 0 3609422 131234 None V-2PAGE22 ITM 7.17 Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers over the existing purlins, rafters and trusses including cost of materials, labour, complete as per specifications ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 411.35 411.35 24.74 False None None False None False 10176.799 0 3609423 131234 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR PLINTH BEAM ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 102.35 False None None False None False 1301658.642 0 3609424 131234 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC BEAMS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 51.01 False None None False None False 691979.2156 0 3609425 131234 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC SLAB ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 115.4 False None None False None False 1467624.888 0 3609426 131234 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC STARICASE ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 7.07 False None None False None False 89914.2804 0 3609427 131234 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR LINTEL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 12.12 False None None False None False 164414.5872 0 3609428 131234 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11911.13 11911.13 14.18 False None None False None False 168899.8234 0 3609429 131234 None 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4317.92 4317.92 20.48 False None None False None False 88431.0016 0 3609430 131234 None 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 141.25 141.25 36.0 False None None False None False 5085.0 0 3609431 131234 None 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1642.91 1642.91 56.5 False None None False None False 92824.415 0 3609432 131234 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 30.54 False None None False None False 201606.4506 0 3609433 131234 None 10.1.2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4877.94 4877.94 9.69 False None None False None False 47267.2386 0 3609434 131234 None 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 761.99 761.99 92.01 False None None False None False 70110.6999 0 3609435 131234 None 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 350.64 350.64 215.82 False None None False None False 75675.1248 0 3609436 131234 None 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 68.92 False None None False None False 24849.106 0 3609437 131234 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3533.63 3533.63 11.09 False None None False None False 39187.9567 0 3609438 131234 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 13.73 False None None False None False 90637.0847 0 3609439 131234 None 10.1.1 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4963.43 4963.43 3.81 False None None False None False 18910.6683 0 3609440 131234 None 1.4.1 V-1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 11.06 False None None False None False 3316.2304 0 3609441 131234 None 1.4.2 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 320.9 320.9 1.7 False None None False None False 545.53 0 3609442 131234 None 17.5 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1391.4 1391.4 7.0 False None None False None False 9739.8 0 3609443 131234 None 17.1 V-2 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1241.48 1241.48 0.28 False None None False None False 347.6144 0 3609444 131234 None 17.2 V-2 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1469.45 1469.45 0.14 False None None False None False 205.723 0 3609445 131234 None 17. V-2 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1476.89 1476.89 0.14 False None None False None False 206.7646 0 3609446 131234 None 17.4 V-2 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1659.02 1659.02 0.14 False None None False None False 232.2628 0 3609447 131234 None 17.14 V-2 Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 @ 6kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1449.63 1449.63 1.0 False None None False None False 1449.63 0 3609448 131234 None V3 305.3.4 Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 130.1 130.1 72.0 False None None False None False 9367.2 0 3609449 131234 None V-3 4.2 Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 2922.8 2922.8 36.0 False None None False None False 105220.8 0 3609450 131234 None V3 6.1 ISSUE RATE Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 MPa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 6095.88 6095.88 24.0 False None None False None False 146301.12 0 3609451 131234 None V-3 6.2 ISSUE RATE Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11107.64 11107.64 48.0 False None None False None False 533166.72 0 3609452 131234 None V-3 8.10 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 105.32 105.32 15.0 False None None False None False 1579.8 0 3609453 131234 None V-3 Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 87.97 87.97 448.0 False None None False None False 39410.56 0 3609454 131234 None V-314621A Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 250 x 100 mm Kerb Stone ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 296.12 296.12 150.0 False None None False None False 44418.0 0 3609455 131234 None 2.1.4 V-1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7702.86 7702.86 2.0 False None None False None False 15405.72 0 3609456 131234 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9156.76 9156.76 10.8 False None None False None False 98893.008 0 3609457 131234 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 459.67 459.67 320.0 False None None False None False 147094.4 0 3609458 131234 None 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 220.54 220.54 320.0 False None None False None False 70572.8 0 3609459 131234 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (FOR COMPOUND WALL) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8761.09 8761.09 9.36 False None None False None False 82003.8024 0 3609460 131234 None 8.20 V-3 Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 672.78 672.78 390.0 False None None False None False 262384.2 0 3609461 131234 None V1 1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Depth exceeding 1.5 m, but not exceeding 3 m FOR SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 526.58 526.58 22.51 False None None False None False 11853.3158 0 3609462 131234 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Raft for Water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8732.83 8732.83 4.32 False None None False None False 37725.8256 0 3609463 131234 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Outer wall water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9326.32 9326.32 5.89 False None None False None False 54932.0248 0 3609464 131234 None V2 15.14 UGT/OHT (inside) waterproofing with Antimicrobial CoatingProviding and Applying two component, waterbased food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 300 of US FDA, having mixing Ratio (Base: Hardener: Water) 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster, and that Item No. 4 is completed across the entire surface prior to applying the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2072.85 2072.85 36.6 False None None False None False 75866.31 0 3609465 131234 None V5 18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2430.92 2430.92 8.0 False None None False None False 19447.36 0 3609466 131234 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RC WALL FOR SEPTIC TANK ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 9.87 False None None False None False 142260.3567 0 3609467 131234 None 15.5 V-2 Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of 25 MPa (as per ASTM D 412), elongation of 500% (as per ASTM D 412), puncture resistance of 1000N (as per ASTM E 154), peel adhesion to concrete 1200N/m (as per ASTM D 903), hydrostatic head resistance 70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self adhesive polymer layer, etc, including surface preparation completely as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 749.6 749.6 63.57 False None None False None False 47652.072 0 3609468 131234 None 8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 110.27 110.27 20.1 False None None False None False 2216.427 0 3609469 131234 None V-5P140I12.4 Geophysical investigation of site for sinking Borewell for supplying drinking water to Habitation either through the Handpump, MWS or PWSS by vertical sounding by adopting veener sounding by adopting veener or schlumbergers's including reconassiance of survey of Geological formation,geophysical investigation of existing ground water in the vicinity quality, quantity and acceptability of the user including the location of site,recommended department of casing pipe required to seal the top and consolidated formation including an extra depth of 1.00Mtr in consolidated formation including an extra depth of drilling required to cover full depth of occupier proposed to trap probable yield and other information required including transportation of instrument and accessories to work site engaging technical personnel labour required etc complete as directed by Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6551.83 6551.83 1.0 False None None False None False 6551.83 0 3609470 131234 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 458.43 458.43 50.0 False None None False None False 22921.5 0 3609471 131234 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above 50 Mtrs and upto 100 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 574.9 574.9 50.0 False None None False None False 28745.0 0 3609472 131234 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above100 Mtrs. and upto 150 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 610.83 610.83 50.0 False None None False None False 30541.5 0 3609473 131234 None V-5P143I12.32 Supply Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2394.99 2394.99 20.0 False None None False None False 47899.8 0 3609474 131234 None V-5P155I13.28 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 681.45 681.45 150.0 False None None False None False 102217.5 0 3609475 131234 None V-5P143I12.33 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 1.0 False None None False None False 185.85 0 3609476 131234 None V-5P154I12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 203.2 203.2 1.0 False None None False None False 203.2 0 3609477 131234 None 18-19 SR13.81.3 Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 260.19 260.19 1.0 False None None False None False 260.19 0 3609478 131234 None V-5P154I13.11.5 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00" - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. 5.00 HP - 90 LPM @ 66 m = 10 STG Outlet Dia - 2.00" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39817.74 39817.74 1.0 False None None False None False 39817.74 0 3609479 131234 None V-5P155I13.23 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter Up to 6 HP - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11832.45 11832.45 1.0 False None None False None False 11832.45 0 3609480 131234 None V-5P155I13.29 Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets. complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1920.45 1920.45 1.0 False None None False None False 1920.45 0 3609481 131234 None V-5P155I13.31 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 49.56 49.56 100.0 False None None False None False 4956.0 0 3609482 131234 None V-5P156I13.32 Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job. as per specifications, with testing of as per instructions of engineer incharge of work - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 8053.5 8053.5 1.0 False None None False None False 8053.5 0 3609483 131234 None V-5P156I13.33 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 1672.65 1672.65 1.0 False None None False None False 1672.65 0 3609484 131234 None 2.6.2 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4 mm2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 208.15 208.15 165.0 False None None False None False 34344.75 0 3609485 131234 None V-5P20I5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour enameled metal paint etc., complete 16 SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 30000.0 False None None False None False 15900.0 0 3609486 131234 None V-5P21I5.44.4 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase /Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600mmx600mmx170mm. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17990.28 17990.28 1.0 False None None False None False 17990.28 0 3609487 131234 None 5.6.6 V-6 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20" x 2.5" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 404.08 404.08 1.0 False None None False None False 404.08 0 3609488 131234 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 1.0 False None None False None False 514.19 0 3609489 131234 None 13.18.1 Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15A to 63A TPST ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 344.44 344.44 1.0 False None None False None False 344.44 0 3609490 131234 None 5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 1.0 False None None False None False 594.72 0 1721828233000 0 None None Buildings MUDABULL WATER SUPPLY AND SANITARY WORKS 2711710.47 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3609491 131235 None V-2 13.50.5 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm dia pipes, From wash basin waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 376.66 376.66 50.0 False None None False None False 18833.0 0 3609492 131235 None V-2 13.50.6 Providing and fixing normal gauge polythene pipes of approved quality Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm dia pipes, From sink & urinal waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 478.25 478.25 20.0 False None None False None False 9565.0 0 3609493 131235 None V-2 13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 358.07 358.07 185.0 False None None False None False 66242.95 0 3609494 131235 None V-2 13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 477.02 477.02 120.0 False None None False None False 57242.4 0 3609495 131235 None V-2 IT.NO 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 244.08 244.08 35.0 False None None False None False 8542.8 0 3609496 131235 None V-2 IT.NO 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 50.0 False None None False None False 18027.5 0 3609497 131235 None V-2 P.NO 128 IT.NO 13.63 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 302.32 302.32 55.0 False None None False None False 16627.6 0 3609498 131235 None V-2 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1511.58 1511.58 21.0 False None None False None False 31743.18 0 3609499 131235 None V-2 P.NO 127 IT.NO 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6891.32 6891.32 4.0 False None None False None False 27565.28 0 3609500 131235 None V-2 P.NO 130 IT.NO 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 614.54 614.54 4.0 False None None False None False 2458.16 0 3609501 131235 None V-2 P.NO 123 IT.NO 14.38 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 179.66 179.66 4.0 False None None False None False 718.64 0 3609502 131235 None V-2 P.NO 178 IT.NO 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :: W.C. pan with ISI marked white solid plastic seat and lid" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7405.5 7405.5 9.0 False None None False None False 66649.5 0 3609503 131235 None V-2 P.NO 124 IT.NO14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6051.28 6051.28 10.0 False None None False None False 60512.8 0 3609504 131235 None V-2 P.NO 126 IT.NO 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6296.6 6296.6 2.0 False None None False None False 12593.2 0 3609505 131235 None V-2 P.NO 126 IT.NO 14.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (510x1040 mm bowl depth 250 mm)" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6960.7 6960.7 4.0 False None None False None False 27842.8 0 3609506 131235 None V-2 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 898.28 898.28 12.0 False None None False None False 10779.36 0 3609507 131235 None V-2 P.NO 124 IT.NO 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3818.6 3818.6 13.0 False None None False None False 49641.8 0 3609508 131235 None V-2 P.NO 120 IT.NO 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 382.85 382.85 90.0 False None None False None False 34456.5 0 3609509 131235 None V-2 P.NO 120 IT.NO 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 20 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 469.58 469.58 70.0 False None None False None False 32870.6 0 3609510 131235 None V-2 p.NO 120 IT.NO 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 25 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 70.0 False None None False None False 41370.0 0 3609511 131235 None V-2 P.NO 120 IT.NO 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 690.12 690.12 30.0 False None None False None False 20703.6 0 3609512 131235 None V-2 P.NO 120 IT.NO 13.31.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 664.1 664.1 20.0 False None None False None False 13282.0 0 3609513 131235 None V-2 P.NO 120IT.NO 13.31.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 967.66 967.66 20.0 False None None False None False 19353.2 0 3609514 131235 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 268.86 268.86 50.0 False None None False None False 13443.0 0 3609515 131235 None V-2 P.NO 120 IT.NO 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 366.74 366.74 50.0 False None None False None False 18337.0 0 3609516 131235 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 215.0 False None None False None False 127065.0 0 3609517 131235 None V-2 P.NO 120 IT.NO 13.33.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 65mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 1734.6 1734.6 25.0 False None None False None False 43365.0 0 3609518 131235 None V-2 P.NO 120 IT.NO 13.33.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 50mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 893.32 893.32 40.0 False None None False None False 35732.8 0 3609519 131235 None V2 13.5.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :" 25 mm nominal bore ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 411.35 411.35 12.0 False None None False None False 4936.2 0 3609520 131235 None V2-13.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 740.92 740.92 7.0 False None None False None False 5186.44 0 3609521 131235 None V-2 13.4.3 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 869.78 869.78 9.0 False None None False None False 7828.02 0 3609522 131235 None v2-13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1059.35 1059.35 2.0 False None None False None False 2118.7 0 3609523 131235 None V-2,A-13, IT.NO 13.2.1 Brass bib-cock 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 354.35 354.35 19.0 False None None False None False 6732.65 0 3609524 131235 None V-2 IT.NO 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Ltr 11.15 11.15 3000.0 False None None False None False 33450.0 0 3609525 131235 None V2 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 182.13 182.13 125.0 False None None False None False 22766.25 0 3609526 131235 None Market Rate Providing and fixing 7.50cms to 15cms dia N.P. Grating 100mm dia. (Page.91/I.No.12.111) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 177.0 177.0 55.0 False None None False None False 9735.0 0 3609527 131235 None Market Rate Air Vent Cowel 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 413.0 413.0 12.0 False None None False None False 4956.0 0 3609528 131235 None Market Rate Air Vent Cowel 110mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 590.0 590.0 12.0 False None None False None False 7080.0 0 3609529 131235 None Market Rate Supplying and fixing Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards with a single 15mm C.P. 32mm dia CP waste coupling, 32mmdia heavy duty CP bottle trap with extension pipe, CP wall flanges, 2 Nos.15mm dia C.P. angle cocks, 2nos.C.P. flexible inlet connection pipes, CI brackets etc., complete including silicon sealant filling. (Jaguar make or Equalent ) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6844.0 6844.0 9.0 False None None False None False 61596.0 0 3609530 131235 None Market Rate Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2183.0 2183.0 9.0 False None None False None False 19647.0 0 3609531 131235 None Market Rate Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 95.0 False None None False None False 72865.0 0 3609532 131235 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. a) 65mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4130.0 4130.0 2.0 False None None False None False 8260.0 0 3609533 131235 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. b) 50mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3304.0 3304.0 4.0 False None None False None False 13216.0 0 3609534 131235 None V2 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 345.68 345.68 4.0 False None None False None False 1382.72 0 3609535 131235 None V2 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5335.13 5335.13 18.0 False None None False None False 96032.34 0 3609536 131235 None V2 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with chase cutter and embed ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3455.57 3455.57 10.0 False None None False None False 34555.7 0 3609537 131235 None V2 13.28 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 79.3 79.3 70.0 False None None False None False 5551.0 0 3609538 131235 None 14.36.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 111.51 111.51 23.0 False None None False None False 2564.73 0 3609539 131235 None 14.37.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 379.13 379.13 23.0 False None None False None False 8719.99 0 3609540 131235 None 13.8.1.1 Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 102.84 102.84 23.0 False None None False None False 2365.32 0 3609541 131235 None 14.22.A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1003.59 1003.59 23.0 False None None False None False 23082.57 0 3609542 131235 None 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 768.18 768.18 53.0 False None None False None False 40713.54 0 3609543 131235 None V2 14.63A Providing and fixing Single lever sink mixer with swivel spout top outlet wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4667.31 4667.31 4.0 False None None False None False 18669.24 0 3609544 131235 None 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5518.51 5518.51 4.0 False None None False None False 22074.04 0 3609545 131235 None ELE 7.3 Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3 density Rock wool insulation with 22SWG Aluminium cladding." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 39372.94 39372.94 3.0 False None None False None False 118118.82 0 3609546 131235 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-110mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 944.0 944.0 10.0 False None None False None False 9440.0 0 3609547 131235 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-75mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 2.0 False None None False None False 1534.0 0 3609548 131235 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-160MM dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1298.0 1298.0 1.0 False None None False None False 1298.0 0 3609549 131235 None V-1,P.NO 6,IT.NO 1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 224.0 False None None False None False 67164.16 0 3609550 131235 None V-1 P.NO 7 IT.NO 1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 536.49 536.49 224.0 False None None False None False 120173.76 0 3609551 131235 None V-5 P.NO 134 IT.NO 10.3 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete. for:" Pipes of SN8 Self Fit - 160mm dia. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 764.46 764.46 300.0 False None None False None False 229338.0 0 3609552 131235 None V-5 P.NO 134 IT.NO 10.2.4 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:( For external Rain water Work ). - do - 160 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 713.66 713.66 70.0 False None None False None False 49956.2 0 3609553 131235 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 45.0 False None None False None False 304087.95 0 3609554 131235 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CATCH BASIN) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 15.0 False None None False None False 101362.65 0 3609555 131235 None 13.39 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3197.86 3197.86 25.0 False None None False None False 79946.5 0 3609556 131235 None 16.18 Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting and using of sight rails and boning rods wherever necessary, shoring and strutting wherever required using Ordinary Port Land Cement, using 1:1.5:3 proportion RCC with 20 mm and down graded jelly, well graded sand and steel of approved quality, 200 mm thick top concrete slab, having wall thickness and raft thickness as in approved drawings and with an offset in raft alround the chamber as in approved drawing, benching concrete with 1:6 slope towards the central drain finished smooth, including fixing and grouting of pipes, including conveying to work spot supply and fixing SFRC Machinehole cover and frame (Heavy duty) conforming to IS:12592 with latest amendments, on a bed of CC 1:2:4 Providing and fixing of minimum 3 mm thick encapsulated plastic footsteps (as per IS 10910) on 12 mm dia. Grade Fe-500 steel bar (as per IS 1786) staggered at 300 mm apart as detailed in Technical specifications, including stone grit beding wherever required, watering, curing, engraving Machinehole number with flow direction on the inner cylindrical surface etc., complete including cost of reinforcement steel and fabrication charges and also cost and conveyance of all materials, labour with all lead and lifts. The Pre-cast RCC Machinehole are for various diamters and depths as stated below and as per detailed drawings, specifications and direction of the Engineer. For 1.2m dia Machinehole:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 97246.63 97246.63 1.0 False None None False None False 97246.63 0 3609557 131235 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 80.0 False None None False None False 47280.0 0 3609558 131235 None 13.23 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (50 mm nominal bore, 242mm long, weighing not less than 1240 g) T. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1665.22 1665.22 5.0 False None None False None False 8326.1 0 3609559 131235 None 13.40.1 V-5 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. (pump room collection sump pumps) (2 HP, Size 65x50 Head 13M, Discharge 462 LPM) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19340.79 19340.79 2.0 False None None False None False 38681.58 0 3609560 131235 None 13.32 V-5 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 8053.5 8053.5 2.0 False None None False None False 16107.0 0 1721828233000 0 None None Buildings MUDABULL ELECTRICAL WORKS 4364380.98 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3609561 131236 None PWD ELE SR V-6 IT.NO 2.2.1 WIRES & CABLES Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 333.29 333.29 25.0 False None None False None False 8332.25 0 3609562 131236 None PWD ELE SR V-10 IT.NO 2.2.2 Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Pack 469.58 469.58 36.0 False None None False None False 16904.88 0 3609563 131236 None PWD ELE SR V-11 IT.NO 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 687.65 687.65 63.0 False None None False None False 43321.95 0 3609564 131236 None PWD ELE SR V-12 IT.NO 2.2.4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 838.8 838.8 8.0 False None None False None False 6710.4 0 3609565 131236 None PWD ELE SR V-14 IT.NO 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 170.98 170.98 25.0 False None None False None False 4274.5 0 3609566 131236 None PWD ELE SR V-15 IT.NO 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 197.0 197.0 32.0 False None None False None False 6304.0 0 3609567 131236 None PWD ELE SR V-16 IT.NO 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 219.3 219.3 16.0 False None None False None False 3508.8 0 3609568 131236 None PWD ELE SR V-17 IT.NO 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 272.58 272.58 7.0 False None None False None False 1908.06 0 3609569 131236 None PWD ELE SR V-18 IT.NO 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 323.38 323.38 20.0 False None None False None False 6467.6 0 3609570 131236 None PWD ELE SR V-20 IT.NO 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 199.48 199.48 32.0 False None None False None False 6383.36 0 3609571 131236 None PWD ELE SR V-21 IT.NO 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 216.83 216.83 16.0 False None None False None False 3469.28 0 3609572 131236 None PWD ELE SR V-22 IT.NO 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 289.93 289.93 7.0 False None None False None False 2029.51 0 3609573 131236 None PWD ELE SR V-23 IT.NO 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 351.88 351.88 21.0 False None None False None False 7389.48 0 3609574 131236 None PWD ELE SR V-24 IT.NO 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 426.22 426.22 31.0 False None None False None False 13212.82 0 3609575 131236 None PWD ELE SR V-26 IT.NO 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 126.38 126.38 217.0 False None None False None False 27424.46 0 3609576 131236 None PWD ELE SR V-6 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 205.67 205.67 2.0 False None None False None False 411.34 0 3609577 131236 None PWD ELE SR V-6,IT.NO 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 211.87 211.87 81.0 False None None False None False 17161.47 0 3609578 131236 None PWD ELE SR V-6,IT.NO 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 442.32 442.32 24.0 False None None False None False 10615.68 0 3609579 131236 None PWD ELE SR V-6,IT.NO 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 223.02 223.02 10.0 False None None False None False 2230.2 0 3609580 131236 None PWD ELE SR V-6, IT.NO 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 403.91 403.91 15.0 False None None False None False 6058.65 0 3609581 131236 None PWD ELE SR V-6,IT.NO 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 292.4 292.4 25.0 False None None False None False 7310.0 0 3609582 131236 None PWD ELE SR V-6,IT.NO 1.13 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 144.96 144.96 24.0 False None None False None False 3479.04 0 3609583 131236 None PWD ELE SR V-6,IT.NO-1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 81.77 81.77 890.0 False None None False None False 72775.3 0 3609584 131236 None PWD ELE SR V-6,IT.NO 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 96.64 96.64 1030.0 False None None False None False 99539.2 0 3609585 131236 None PWD ELE SR V-6, IT.NO .2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 127.62 127.62 250.0 False None None False None False 31905.0 0 3609586 131236 None PWD ELE SR V-6,IT.NO1.3.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 84.25 84.25 445.0 False None None False None False 37491.25 0 3609587 131236 None PWD ELE SR V-6,IT.NO-1.3.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 97.88 97.88 515.0 False None None False None False 50408.2 0 3609588 131236 None PWD ELE SR V-6,IT.NO-1.3.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 122.66 122.66 150.0 False None None False None False 18399.0 0 3609589 131236 None PWD ELE SR V-6,IT.NO 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 32.21 32.21 470.0 False None None False None False 15138.7 0 3609590 131236 None PWD ELE SR V-6,IT.NO 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 52.04 52.04 1530.0 False None None False None False 79621.2 0 3609591 131236 None PWD ELE SR V-6,IT.NO 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 78.06 78.06 740.0 False None None False None False 57764.4 0 3609592 131236 None PWD ELE SR V-6,IT.NO 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 113.99 113.99 580.0 False None None False None False 66114.2 0 3609593 131236 None PWD ELE SR V-6,IT.NO 5.19.11 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5003.08 5003.08 2.0 False None None False None False 10006.16 0 3609594 131236 None PWD ELE SR V-6,IT.NO 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 6-32Amps SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 62.0 False None None False None False 31879.78 0 3609595 131236 None PWD ELE SR V-6 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 40Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3771.52 3771.52 2.0 False None None False None False 7543.04 0 3609596 131236 None PWD ELE SR V-6,IT.NO 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5299.2 5299.2 2.0 False None None False None False 10598.4 0 3609597 131236 None PWD ELE SR V-6,IT.NO 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 480.73 480.73 10.0 False None None False None False 4807.3 0 3609598 131236 None PWD ELE SR V-6,IT.NO 6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39.65 39.65 16.0 False None None False None False 634.4 0 3609599 131236 None V-6 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4348.89 4348.89 7.0 False None None False None False 30442.23 0 3609600 131236 None V-6 12.58.2 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 101.6 101.6 100.0 False None None False None False 10160.0 0 3609601 131236 None 12.58.6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600X600X3 GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1084.13 1084.13 6.0 False None None False None False 6504.78 0 3609602 131236 None 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10 12W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1096.52 1096.52 19.0 False None None False None False 20833.88 0 3609603 131236 None 11.5.3 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1640.44 1640.44 5.0 False None None False None False 8202.2 0 3609604 131236 None 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 854.91 854.91 51.0 False None None False None False 43600.41 0 3609605 131236 None 11.11.3 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 184.61 184.61 15.0 False None None False None False 2769.15 0 3609606 131236 None PWD ELE SR V-6,IT.NO 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1848.59 1848.59 13.0 False None None False None False 24031.67 0 3609607 131236 None PWD ELE SR V-6,IT.NO 6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3316.8 3316.8 24.0 False None None False None False 79603.2 0 3609608 131236 None PWD ELE SR V-6,IT.NO 13.11 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 390.29 390.29 24.0 False None None False None False 9366.96 0 3609609 131236 None PWD ELE SR V-6,IT.NO 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 151.16 151.16 83.0 False None None False None False 12546.28 0 3609610 131236 None PWD ELE SR V-6,IT.NO 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 875.97 875.97 13.0 False None None False None False 11387.61 0 3609611 131236 None PWD ELE SR V-6,IT.NO 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 200.72 200.72 3.0 False None None False None False 602.16 0 3609612 131236 None PWD ELE SR V-6,IT.NO 5.42.1 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 86000.0 False None None False None False 45580.0 0 3609613 131236 None PWD ELE SR V-6,IT.NO 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 5.0 False None None False None False 21279.85 0 3609614 131236 None PWD ELE SR V-6,IT.NO 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 10.0 False None None False None False 3779.0 0 3609615 131236 None PWD ELE SR V-6,IT.NO 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 10.0 False None None False None False 9366.8 0 3609616 131236 None PWD ELE SR V-6,IT.NO 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) 100Amps 25kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 10515.39 10515.39 1.0 False None None False None False 10515.39 0 3609617 131236 None PWD ELE SR V-6,iT.NO 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps DP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 10.0 False None None False None False 38260.3 0 3609618 131236 None PWD ELE SR V-6,IT.NO 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11541.29 11541.29 1.0 False None None False None False 11541.29 0 3609619 131236 None PWD ELE SR V-6,IT.NO 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3609620 131236 None PWD ELE SR V-6,IT.NO 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 696.32 696.32 3.0 False None None False None False 2088.96 0 3609621 131236 None PWD ELE SR V-6,IT.NO5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 15.0 False None None False None False 8920.8 0 3609622 131236 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way SP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2885.63 2885.63 2.0 False None None False None False 5771.26 0 3609623 131236 None 5.19.12 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6120.66 6120.66 1.0 False None None False None False 6120.66 0 3609624 131236 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 1.0 False None None False None False 3826.03 0 3609625 131236 None 5.20.8 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6377.13 6377.13 3.0 False None None False None False 19131.39 0 3609626 131236 None 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 109549.9 109549.9 0.1 False None None False None False 10954.99 0 3609627 131236 None 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 35 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 190882.82 190882.82 0.05 False None None False None False 9544.141 0 3609628 131236 None 32.13 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 70 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 393892.97 393892.97 0.1 False None None False None False 39389.297 0 3609629 131236 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.05 False None None False None False 1293.8875 0 3609630 131236 None 31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 38581.22 38581.22 0.2 False None None False None False 7716.244 0 3609631 131236 None 6.17.6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 15.41 15.41 20.0 False None None False None False 308.2 0 3609632 131236 None 16.17.10 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 70 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 148.68 148.68 16.0 False None None False None False 2378.88 0 3609633 131236 None 11.11.5 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 333.29 333.29 9.0 False None None False None False 2999.61 0 3609634 131236 None 11.6.3 Supplying of recess mounting non integral type .LED . W luminaire comprising of pressure decastextruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' 34 36watt ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5641.17 5641.17 8.0 False None None False None False 45129.36 0 3609635 131236 None 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4985.74 4985.74 2.0 False None None False None False 9971.48 0 3609636 131236 None 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1810.18 1810.18 3.0 False None None False None False 5430.54 0 3609637 131236 None 5.14.1 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 2738.19 2738.19 2.0 False None None False None False 5476.38 0 3609638 131236 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 169.74 169.74 24.0 False None None False None False 4073.76 0 3609639 131236 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 395.24 395.24 31.0 False None None False None False 12252.44 0 3609640 131236 None 2.2.5 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 1225.37 1225.37 4.0 False None None False None False 4901.48 0 3609641 131236 None 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 144.96 144.96 6.0 False None None False None False 869.76 0 3609642 131236 None 12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 78.06 78.06 21.0 False None None False None False 1639.26 0 3609643 131236 None 3.6.11 TV/Telephone socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 193.28 193.28 2.0 False None None False None False 386.56 0 3609644 131236 None 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 304.79 304.79 1.0 False None None False None False 304.79 0 3609645 131236 None 32.02 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 2 core 10 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 98168.45 98168.45 0.1 False None None False None False 9816.845 0 3609646 131236 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.1 False None None False None False 2587.775 0 3609647 131236 None pwd sr Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 15.41 15.41 15.0 False None None False None False 231.15 0 3609648 131236 None 11..11.7 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500-degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 527.81 527.81 3.0 False None None False None False 1583.43 0 3609649 131236 None 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 64.43 64.43 2.0 False None None False None False 128.86 0 3609650 131236 None 11.8.1 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 25watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3004.58 3004.58 1.0 False None None False None False 3004.58 0 3609651 131236 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers32Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 298.6 298.6 1.0 False None None False None False 298.6 0 3609652 131236 None 5.30 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1709.82 1709.82 1.0 False None None False None False 1709.82 0 3609653 131236 None 7.1.3 Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting.25Litres ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 12689.84 12689.84 1.0 False None None False None False 12689.84 0 3609654 131236 None PWD SR 2023-24 Volume 6 It No-9.3.3 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. 5 kVA ON LINE UPS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 84726.54 84726.54 1.0 False None None False None False 84726.54 0 3609655 131236 None PWD SR 2023-24 Volume 6 It No-9.5.9 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150AH capacity ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19693.91 19693.91 4.0 False None None False None False 78775.64 0 3609656 131236 None A.R Item Name : The Tenderer (agency) should arrange to obtain (get), detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration &proof checking by reputedGovernment/Semi Government/IISC /IIT/NIT/or as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, 3D view, MFP design and Drawings, Internal and External Electrical services including electrical infrastructure, etc. Interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project and 6 sets of as built drawings should be submitted to the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 300000.0 300000.0 1.0 False None None False None False 300000.0 0 3609657 131236 None LQR IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),30M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 23836.0 23836.0 4.0 False None None False None False 95344.0 0 3609658 131236 None LQR IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),60M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 25606.0 25606.0 2.0 False None None False None False 51212.0 0 3609659 131236 None LQR Supplying, installation, testing and commissioning of SITC of complete 8 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up to 16 channels),internal storage supports 8HDDs expandable up to 64TB (8TB each),operating temperatures(-10 degree C) and (55 degree C),UL,CE,FCC. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3609660 131236 None LQR Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17110.0 17110.0 2.0 False None None False None False 34220.0 0 3609661 131236 None LQR Supply and Installation of I/Os ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 147.5 147.5 12.0 False None None False None False 1770.0 0 3609662 131236 None LQR Supply and Installation of 2 Mtrs Patch Chord The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 265.5 265.5 12.0 False None None False None False 3186.0 0 3609663 131236 None LQR Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 336.3 336.3 6.0 False None None False None False 2017.8 0 3609664 131236 None LQR Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3609665 131236 None V-6 8.1 Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 600.0 False None None False None False 28248.0 0 3609666 131236 None 1.2.2 Supplying heavy gauge PVC Consealed conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 96.64 96.64 500.0 False None None False None False 48320.0 0 3609667 131236 None 8.12.3 Supplying & Fixing of Patch panel for LAN cabling .16 Port 10/100 patch panel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3778.95 3778.95 1.0 False None None False None False 3778.95 0 3609668 131236 None 8.4.1 v-6 Supplying & Fixing of switch mounting rack with power manager & Cable manager 4U with 450mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6061.19 6061.19 1.0 False None None False None False 6061.19 0 3609669 131236 None 1.01 Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 8767.16 8767.16 8.0 False None None False None False 70137.28 0 3609670 131236 None 2.02 Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1379.01 1379.01 8.0 False None None False None False 11032.08 0 3609671 131236 None 6.05 Supply of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 107.79 107.79 6.0 False None None False None False 646.74 0 3609672 131236 None 13.12 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 6.0 False None None False None False 356.82 0 3609673 131236 None 2.16 Supply of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 296.12 296.12 11.0 False None None False None False 3257.32 0 3609674 131236 None 2.16 Erection of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 115.23 115.23 11.0 False None None False None False 1267.53 0 3609675 131236 None 68.17 Supply and fixing of Caution/Danger Board ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 185.85 185.85 6.0 False None None False None False 1115.1 0 3609676 131236 None 4.02 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 110.27 110.27 8.0 False None None False None False 882.16 0 3609677 131236 None 5.09 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 52.04 52.04 8.0 False None None False None False 416.32 0 3609678 131236 None 24.05 Supply and fixing of 11 kV, 400 Amps Double Break GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 26341.14 26341.14 1.0 False None None False None False 26341.14 0 3609679 131236 None 24.07 Supply and fixing of H-Frame for mounting GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7521.97 7521.97 1.0 False None None False None False 7521.97 0 3609680 131236 None 25.01 Supply of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 7279.13 7279.13 1.0 False None None False None False 7279.13 0 3609681 131236 None 13.01 Erection of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 293.64 293.64 1.0 False None None False None False 293.64 0 3609682 131236 None 13.07 Supply, erection, testing and commissioning of 63 KVA 5Star rated Aluminium wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, , oil level indicator with + 5% to -10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 210958.34 210958.34 1.0 False None None False None False 210958.34 0 3609683 131236 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 4348.89 4348.89 8.0 False None None False None False 34791.12 0 3609684 131236 None 12.58.3 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work MT 158.59 158.59 100.0 False None None False None False 15859.0 0 3609685 131236 None 12.58.9 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2035.68 2035.68 100.0 False None None False None False 203568.0 0 3609686 131236 None 12.58.11 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 9194.62 9194.62 10.0 False None None False None False 91946.2 0 3609687 131236 None 45.07 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Outdoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 5039.01 5039.01 4.0 False None None False None False 20156.04 0 3609688 131236 None 45.04 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Indoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 3887.98 3887.98 2.0 False None None False None False 7775.96 0 3609689 131236 None 36.01 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 1102296.17 1102296.17 0.1 False None None False None False 110229.617 0 3609690 131236 None 38. Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1222.89 1222.89 150.0 False None None False None False 183433.5 0 3609691 131236 None 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 176000.0 False None None False None False 93280.0 0 3609692 131236 None 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 6.0 False None None False None False 25535.82 0 3609693 131236 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 12.0 False None None False None False 4534.8 0 3609694 131236 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 12.0 False None None False None False 11240.16 0 3609695 131236 None 5.15.15 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 250Amps 35kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 29172.26 29172.26 1.0 False None None False None False 29172.26 0 3609696 131236 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3609697 131236 None 10.1.3 Supplying, installing, testing and commissioning of 25KVA/20kw Diesel Generator set(CPCB-4) with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 Generator set specificationsEngine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have + 1.0 % Voltage regulation (max) in static conditions- IP: 23 protections with insulation class H. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lamps for ‘Load On’ and ‘Set Running’, Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections. Genset Controller: microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface, Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory, Provide Alternator Data. Voltage (1 ph or 3 ph line to line and line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph and total), Frequency, Provide Engine Data, Starting battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Meter calibration, Engine controls, Power Start operates on 12 VDC batteries,- Auto start mode accepts a ground signal from remote devices to automatically start the DG set. The remote start will also wake up the control system from sleep mode. Acoustic enclosure: The acoustic enclosure shall be made of 1.6 mm thick CRCA sheets in suitable approved shade and a structural/ sheet metal base frame painted in black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75dBA at 1 mtr sound levels specified by Ministry of Environment & Forest. The enclosure has the following features: Specially designed to meet stringent MOEF/ CPCB norms of 75dBA @ 1mtr at 75% load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 558914.14 558914.14 1.0 False None None False None False 558914.14 0 3609698 131236 None 10.2.2 Supply, Erection, testing and commissioning of AMF panel suitable for .KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .amps 4 pole contactor for alternator with thermal O/L relay,. Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and flat/Boost facility. 25 KVA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 72742.93 72742.93 1.0 False None None False None False 72742.93 0 3609699 131236 None A.R Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 3540.0 3540.0 5.0 False None None False None False 17700.0 0 3609700 131236 None A.R Supply and laying of 2Cx2.5SQ MM and 6CX2.5 SQ MM Sheilded Sensor and control Cables ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 236.0 236.0 50.0 False None None False None False 11800.0 0 3609701 131236 None 58.02 LT Metering Cubicle at Low Tension for 50KW to 150KW having specification and design as per the prototype approval (Excluding Meter cost and modem cost) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 98973.8 98973.8 1.0 False None None False None False 98973.8 0 3609702 131236 None 53.01 CT PT Operated ETV Meter 0.2s Accuracy class with ABT feature and DLMS protocal with ToD with RS232 Port UNIDIRACTIONAL ( Used for HT Installation, LT Metering Cubicle (50-150KW) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 24302.99 24302.99 1.0 False None None False None False 24302.99 0 3609703 131236 None 10.01 Supply and fixing of PG Clamps for Rabbit Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 173.46 173.46 15.0 False None None False None False 2601.9 0 3609704 131236 None v-6 2.02 Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 603.39 603.39 6.0 False None None False None False 3620.34 0 3609705 131236 None v-6 2.02 Erection of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 318.42 318.42 6.0 False None None False None False 1910.52 0 3609706 131236 None v-6 6.06 Supply and fixing of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 254.0 254.0 18.0 False None None False None False 4572.0 0 3609707 131236 None v-6 6.10 Supply and fixing of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 235.45 235.45 18.0 False None None False None False 4238.1 0 3609708 131236 None 13.12 v-6 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 18.0 False None None False None False 1070.46 0 3609709 131236 None v-6 6.08 Supply and fixing of 15 Strain Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 73.1 73.1 4.0 False None None False None False 292.4 0 3609710 131236 None 7.02 Supply of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 57283.93 57283.93 1.0 False None None False None False 57283.93 0 3609711 131236 None 6.02 V-6 Erection of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 5403.28 5403.28 1.0 False None None False None False 5403.28 0 1721828233000 0 None None Buildings MALAGATHI IN SHORAPUR TALUK 34741282.93 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3609712 131237 None CSR:V-3 PAGE NO 9 Itm 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work 100 Sqm 486.93 486.93 17.49 False None None False None False 8516.4057 0 3609713 131237 None V-1 page 8 itm 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 117.71 117.71 768.64 False None None False None False 90476.6144 0 3609714 131237 None V-1page 8 itm 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 126.38 126.38 1311.57 False None None False None False 165756.2166 0 3609715 131237 None V-1page 8 itm 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 449.76 449.76 230.53 False None None False None False 103683.1728 0 3609716 131237 None V-3page 3 A Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 167.27 167.27 225.13 False None None False None False 37657.4951 0 3609717 131237 None V-2page5 itm 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 146.2 146.2 774.16 False None None False None False 113182.192 0 3609718 131237 None V-1pg7 itm1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 329.57 329.57 807.35 False None None False None False 266078.3395 0 3609719 131237 None V-1page7vitm1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 587.29 587.29 728.89 False None None False None False 428069.8081 0 3609720 131237 None V-1page 15 itm2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7420.37 7420.37 161.37 False None None False None False 1197425.1069 0 3609721 131237 None V-1page15 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR FOOTING ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8478.33 8478.33 177.95 False None None False None False 1508718.8235 0 3609722 131237 None V-1page16 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatess FOR PEDESTAL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8635.33 8635.33 13.4 False None None False None False 115713.422 0 3609723 131237 None V-1page15itm 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR COLUMNS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 55.14 False None None False None False 794755.4274 0 3609724 131237 None V-3page135itm15.4 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 252.76 252.76 13.0 False None None False None False 3285.88 0 3609725 131237 None V-2page55 itm 8.16.a Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1533.88 1533.88 13.81 False None None False None False 21182.8828 0 3609726 131237 None V-1page18itm2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. - Buildings ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Tonne 110837.22 110837.22 50.82 False None None False None False 5632747.5204 0 3609727 131237 None 18-19SR ITM4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No KBS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 38.94 38.94 145.02 False None None False None False 5647.0788 0 3609728 131237 None DATA RATE Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 86.14 86.14 145.02 False None None False None False 12492.0228 0 3609729 131237 None V-2PAGE 9 ITM5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7915.97 7915.97 8.76 False None None False None False 69343.8972 0 3609730 131237 None V-2PAGE 14 ITM 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1623.09 1623.09 1313.93 False None None False None False 2132626.6437 0 3609731 131237 None V-2page 14 itm 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1367.86 1367.86 171.24 False None None False None False 234232.3464 0 3609732 131237 None V-2 page100 itm 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 122431.79 122431.79 1.2 False None None False None False 146918.148 0 3609733 131237 None V-2 page 105 itm 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1258.82 1258.82 32.0 False None None False None False 40282.24 0 3609734 131237 None 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 681.45 681.45 64.0 False None None False None False 43612.8 0 3609735 131237 None 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 464.63 464.63 32.0 False None None False None False 14868.16 0 3609736 131237 None 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 64.0 False None None False None False 11894.4 0 3609737 131237 None 22.15.9 PProviding and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 86.73 86.73 128.0 False None None False None False 11101.44 0 3609738 131237 None 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 123.9 123.9 32.0 False None None False None False 3964.8 0 3609739 131237 None 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1303.43 1303.43 32.0 False None None False None False 41709.76 0 3609740 131237 None V-2page69 itm 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 74.34 74.34 192.0 False None None False None False 14273.28 0 3609741 131237 None 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 168.45 False None None False None False 10853.2335 0 3609742 131237 None V-2page105 itm 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4115.96 4115.96 74.84 False None None False None False 308038.4464 0 3609743 131237 None V-2page109 itm 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 8343.43 8343.43 69.39 False None None False None False 578950.6077 0 3609744 131237 None V-2page109 itm 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 7085.84 7085.84 6.84 False None None False None False 48467.1456 0 3609745 131237 None V-2page 86itm11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 208.15 208.15 1600.83 False None None False None False 333212.7645 0 3609746 131237 None V-2page 111itm 12.93.1 Providing and fixing factory made single extruded WPC (WoodPolymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Size 62 x 100mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work m 869.78 869.78 64.35 False None None False None False 55970.343 0 3609747 131237 None V-2page84 itm 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kgs 168.5 168.5 1724.91 False None None False None False 290647.335 0 3609748 131237 None V-2page 41itm 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 386.57 386.57 1763.82 False None None False None False 681839.8974 0 3609749 131237 None V-2page 43 itm 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 261.43 261.43 1176.83 False None None False None False 307658.6669 0 3609750 131237 None V-2page50 itm 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 123.9 123.9 2919.03 False None None False None False 361667.817 0 3609751 131237 None V-2page42itm 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 432.41 432.41 975.48 False None None False None False 421807.3068 0 3609752 131237 None V-2page41 itm 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 438.61 438.61 163.05 False None None False None False 71515.3605 0 3609753 131237 None 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 2013.85 False None None False None False 94812.058 0 3609754 131237 None 10.5.2 Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 254.88 254.88 13.0 False None None False None False 3313.44 0 3609755 131237 None V-2page 54itm 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 628.05 False None None False None False 40465.2615 0 3609756 131237 None V-2page61itm 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1455.83 1455.83 580.89 False None None False None False 845677.0887 0 3609757 131237 None V-2page59 itm9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 991.2 991.2 71.5 False None None False None False 70870.8 0 3609758 131237 None V-2page63 itm 9.32 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3199.1 3199.1 34.54 False None None False None False 110496.914 0 3609759 131237 None V-2page 4 itm 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 365.51 365.51 316.07 False None None False None False 115526.7457 0 3609760 131237 None V-2page 60 itm 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1101.47 1101.47 59.14 False None None False None False 65140.9358 0 3609761 131237 None V-2page65 itmv9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1795.31 1795.31 259.57 False None None False None False 466008.6167 0 3609762 131237 None V-2 page85 itm11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 700.04 700.04 357.82 False None None False None False 250488.3128 0 3609763 131237 None V-2 page 48itm 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 157.35 157.35 2741.14 False None None False None False 431318.379 0 3609764 131237 None V-2page 46itm8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 193.28 193.28 759.66 False None None False None False 146827.0848 0 3609765 131237 None V-2page47 itm8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 61.95 61.95 96.21 False None None False None False 5960.2095 0 3609766 131237 None V-2page48 itm 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 142.49 142.49 76.23 False None None False None False 10862.0127 0 3609767 131237 None V-2page47itm 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 65.67 65.67 179.6 False None None False None False 11794.332 0 3609768 131237 None 8.82 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 838.8 838.8 179.6 False None None False None False 150648.48 0 3609769 131237 None V-2page64itm 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2044.35 2044.35 17.32 False None None False None False 35408.142 0 3609770 131237 None V-2page77 itm 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5548.24 5548.24 5.25 False None None False None False 29128.26 0 3609771 131237 None 15.12 Newly Constructed Roof/Podium with PU Waterproof coating Above 500 m2. Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids 85%, Tensile strength 2 Mpa as per ASTM D 412, Elongation at break 400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness 55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo textile over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1443.44 1443.44 726.5 False None None False None False 1048659.16 0 3609772 131237 None V-2PAGE22 ITM 7.17 Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers over the existing purlins, rafters and trusses including cost of materials, labour, complete as per specifications ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 411.35 411.35 24.74 False None None False None False 10176.799 0 3609773 131237 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR PLINTH BEAM ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 102.35 False None None False None False 1301658.642 0 3609774 131237 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC BEAMS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 51.01 False None None False None False 691979.2156 0 3609775 131237 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC SLAB ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 115.4 False None None False None False 1467624.888 0 3609776 131237 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC STARICASE ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 7.07 False None None False None False 89914.2804 0 3609777 131237 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR LINTEL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 12.12 False None None False None False 164414.5872 0 3609778 131237 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11911.13 11911.13 14.18 False None None False None False 168899.8234 0 3609779 131237 None 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4317.92 4317.92 20.48 False None None False None False 88431.0016 0 3609780 131237 None 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 141.25 141.25 36.0 False None None False None False 5085.0 0 3609781 131237 None 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1642.91 1642.91 56.5 False None None False None False 92824.415 0 3609782 131237 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 30.54 False None None False None False 201606.4506 0 3609783 131237 None 10.1.2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4877.94 4877.94 9.69 False None None False None False 47267.2386 0 3609784 131237 None 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 761.99 761.99 92.01 False None None False None False 70110.6999 0 3609785 131237 None 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 350.64 350.64 215.82 False None None False None False 75675.1248 0 3609786 131237 None 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 68.92 False None None False None False 24849.106 0 3609787 131237 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3533.63 3533.63 11.09 False None None False None False 39187.9567 0 3609788 131237 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 13.73 False None None False None False 90637.0847 0 3609789 131237 None 10.1.1 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4963.43 4963.43 3.81 False None None False None False 18910.6683 0 3609790 131237 None 1.4.1 V-1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 11.06 False None None False None False 3316.2304 0 3609791 131237 None 1.4.2 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 320.9 320.9 1.7 False None None False None False 545.53 0 3609792 131237 None 17.5 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1391.4 1391.4 7.0 False None None False None False 9739.8 0 3609793 131237 None 17.1 V-2 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1241.48 1241.48 0.28 False None None False None False 347.6144 0 3609794 131237 None 17.2 V-2 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1469.45 1469.45 0.14 False None None False None False 205.723 0 3609795 131237 None 17. V-2 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1476.89 1476.89 0.14 False None None False None False 206.7646 0 3609796 131237 None 17.4 V-2 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1659.02 1659.02 0.14 False None None False None False 232.2628 0 3609797 131237 None 17.14 V-2 Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 @ 6kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1449.63 1449.63 1.0 False None None False None False 1449.63 0 3609798 131237 None V3 305.3.4 Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 130.1 130.1 72.0 False None None False None False 9367.2 0 3609799 131237 None V-3 4.2 Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 2922.8 2922.8 36.0 False None None False None False 105220.8 0 3609800 131237 None V3 6.1 ISSUE RATE Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 MPa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 6095.88 6095.88 24.0 False None None False None False 146301.12 0 3609801 131237 None V-3 6.2 ISSUE RATE Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11107.64 11107.64 48.0 False None None False None False 533166.72 0 3609802 131237 None V-3 8.10 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 105.32 105.32 15.0 False None None False None False 1579.8 0 3609803 131237 None V-3 Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 87.97 87.97 448.0 False None None False None False 39410.56 0 3609804 131237 None V-314621A Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 250 x 100 mm Kerb Stone ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 296.12 296.12 150.0 False None None False None False 44418.0 0 3609805 131237 None 2.1.4 V-1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7702.86 7702.86 2.0 False None None False None False 15405.72 0 3609806 131237 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9156.76 9156.76 10.8 False None None False None False 98893.008 0 3609807 131237 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 459.67 459.67 320.0 False None None False None False 147094.4 0 3609808 131237 None 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 220.54 220.54 320.0 False None None False None False 70572.8 0 3609809 131237 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (FOR COMPOUND WALL) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8761.09 8761.09 9.36 False None None False None False 82003.8024 0 3609810 131237 None 8.20 V-3 Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 672.78 672.78 390.0 False None None False None False 262384.2 0 3609811 131237 None V1 1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Depth exceeding 1.5 m, but not exceeding 3 m FOR SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 526.58 526.58 22.51 False None None False None False 11853.3158 0 3609812 131237 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Raft for Water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8732.83 8732.83 4.32 False None None False None False 37725.8256 0 3609813 131237 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Outer wall water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9326.32 9326.32 5.89 False None None False None False 54932.0248 0 3609814 131237 None V2 15.14 UGT/OHT (inside) waterproofing with Antimicrobial CoatingProviding and Applying two component, waterbased food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 300 of US FDA, having mixing Ratio (Base: Hardener: Water) 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster, and that Item No. 4 is completed across the entire surface prior to applying the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2072.85 2072.85 36.6 False None None False None False 75866.31 0 3609815 131237 None V5 18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2430.92 2430.92 8.0 False None None False None False 19447.36 0 3609816 131237 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RC WALL FOR SEPTIC TANK ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 9.87 False None None False None False 142260.3567 0 3609817 131237 None 15.5 V-2 Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of 25 MPa (as per ASTM D 412), elongation of 500% (as per ASTM D 412), puncture resistance of 1000N (as per ASTM E 154), peel adhesion to concrete 1200N/m (as per ASTM D 903), hydrostatic head resistance 70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self adhesive polymer layer, etc, including surface preparation completely as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 749.6 749.6 63.57 False None None False None False 47652.072 0 3609818 131237 None 8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 110.27 110.27 20.1 False None None False None False 2216.427 0 3609819 131237 None V-5P140I12.4 Geophysical investigation of site for sinking Borewell for supplying drinking water to Habitation either through the Handpump, MWS or PWSS by vertical sounding by adopting veener sounding by adopting veener or schlumbergers's including reconassiance of survey of Geological formation,geophysical investigation of existing ground water in the vicinity quality, quantity and acceptability of the user including the location of site,recommended department of casing pipe required to seal the top and consolidated formation including an extra depth of 1.00Mtr in consolidated formation including an extra depth of drilling required to cover full depth of occupier proposed to trap probable yield and other information required including transportation of instrument and accessories to work site engaging technical personnel labour required etc complete as directed by Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6551.83 6551.83 1.0 False None None False None False 6551.83 0 3609820 131237 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 458.43 458.43 50.0 False None None False None False 22921.5 0 3609821 131237 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above 50 Mtrs and upto 100 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 574.9 574.9 50.0 False None None False None False 28745.0 0 3609822 131237 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above100 Mtrs. and upto 150 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 610.83 610.83 50.0 False None None False None False 30541.5 0 3609823 131237 None V-5P143I12.32 Supply Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2394.99 2394.99 20.0 False None None False None False 47899.8 0 3609824 131237 None V-5P155I13.28 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 681.45 681.45 150.0 False None None False None False 102217.5 0 3609825 131237 None V-5P143I12.33 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 1.0 False None None False None False 185.85 0 3609826 131237 None V-5P154I12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 203.2 203.2 1.0 False None None False None False 203.2 0 3609827 131237 None 18-19 SR13.81.3 Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 260.19 260.19 1.0 False None None False None False 260.19 0 3609828 131237 None V-5P154I13.11.5 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00" - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. 5.00 HP - 90 LPM @ 66 m = 10 STG Outlet Dia - 2.00" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39817.74 39817.74 1.0 False None None False None False 39817.74 0 3609829 131237 None V-5P155I13.23 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter Up to 6 HP - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11832.45 11832.45 1.0 False None None False None False 11832.45 0 3609830 131237 None V-5P155I13.29 Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets. complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1920.45 1920.45 1.0 False None None False None False 1920.45 0 3609831 131237 None V-5P155I13.31 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 49.56 49.56 100.0 False None None False None False 4956.0 0 3609832 131237 None V-5P156I13.32 Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job. as per specifications, with testing of as per instructions of engineer incharge of work - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 8053.5 8053.5 1.0 False None None False None False 8053.5 0 3609833 131237 None V-5P156I13.33 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 1672.65 1672.65 1.0 False None None False None False 1672.65 0 3609834 131237 None 2.6.2 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4 mm2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 208.15 208.15 165.0 False None None False None False 34344.75 0 3609835 131237 None V-5P20I5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour enameled metal paint etc., complete 16 SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 30000.0 False None None False None False 15900.0 0 3609836 131237 None V-5P21I5.44.4 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase /Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600mmx600mmx170mm. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17990.28 17990.28 1.0 False None None False None False 17990.28 0 3609837 131237 None 5.6.6 V-6 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20" x 2.5" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 404.08 404.08 1.0 False None None False None False 404.08 0 3609838 131237 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 1.0 False None None False None False 514.19 0 3609839 131237 None 13.18.1 Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15A to 63A TPST ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 344.44 344.44 1.0 False None None False None False 344.44 0 3609840 131237 None 5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 1.0 False None None False None False 594.72 0 3609841 131237 None V-2 13.50.5 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm dia pipes, From wash basin waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 376.66 376.66 50.0 False None None False None False 18833.0 0 3609842 131237 None V-2 13.50.6 Providing and fixing normal gauge polythene pipes of approved quality Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm dia pipes, From sink & urinal waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 478.25 478.25 20.0 False None None False None False 9565.0 0 3609843 131237 None V-2 13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 358.07 358.07 185.0 False None None False None False 66242.95 0 3609844 131237 None V-2 13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 477.02 477.02 120.0 False None None False None False 57242.4 0 3609845 131237 None V-2 IT.NO 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 244.08 244.08 35.0 False None None False None False 8542.8 0 3609846 131237 None V-2 IT.NO 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 50.0 False None None False None False 18027.5 0 3609847 131237 None V-2 P.NO 128 IT.NO 13.63 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 302.32 302.32 55.0 False None None False None False 16627.6 0 3609848 131237 None V-2 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1511.58 1511.58 21.0 False None None False None False 31743.18 0 3609849 131237 None V-2 P.NO 127 IT.NO 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6891.32 6891.32 4.0 False None None False None False 27565.28 0 3609850 131237 None V-2 P.NO 130 IT.NO 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 614.54 614.54 4.0 False None None False None False 2458.16 0 3609851 131237 None V-2 P.NO 123 IT.NO 14.38 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 179.66 179.66 4.0 False None None False None False 718.64 0 3609852 131237 None V-2 P.NO 178 IT.NO 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :: W.C. pan with ISI marked white solid plastic seat and lid" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7405.5 7405.5 9.0 False None None False None False 66649.5 0 3609853 131237 None V-2 P.NO 124 IT.NO14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6051.28 6051.28 10.0 False None None False None False 60512.8 0 3609854 131237 None V-2 P.NO 126 IT.NO 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6296.6 6296.6 2.0 False None None False None False 12593.2 0 3609855 131237 None V-2 P.NO 126 IT.NO 14.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (510x1040 mm bowl depth 250 mm)" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6960.7 6960.7 4.0 False None None False None False 27842.8 0 3609856 131237 None V-2 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 898.28 898.28 12.0 False None None False None False 10779.36 0 3609857 131237 None V-2 P.NO 124 IT.NO 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3818.6 3818.6 13.0 False None None False None False 49641.8 0 3609858 131237 None V-2 P.NO 120 IT.NO 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 382.85 382.85 90.0 False None None False None False 34456.5 0 3609859 131237 None V-2 P.NO 120 IT.NO 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 20 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 469.58 469.58 70.0 False None None False None False 32870.6 0 3609860 131237 None V-2 p.NO 120 IT.NO 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 25 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 70.0 False None None False None False 41370.0 0 3609861 131237 None V-2 P.NO 120 IT.NO 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 690.12 690.12 30.0 False None None False None False 20703.6 0 3609862 131237 None V-2 P.NO 120 IT.NO 13.31.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 664.1 664.1 20.0 False None None False None False 13282.0 0 3609863 131237 None V-2 P.NO 120IT.NO 13.31.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 967.66 967.66 20.0 False None None False None False 19353.2 0 3609864 131237 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 268.86 268.86 50.0 False None None False None False 13443.0 0 3609865 131237 None V-2 P.NO 120 IT.NO 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 366.74 366.74 50.0 False None None False None False 18337.0 0 3609866 131237 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 215.0 False None None False None False 127065.0 0 3609867 131237 None V-2 P.NO 120 IT.NO 13.33.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 65mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 1734.6 1734.6 25.0 False None None False None False 43365.0 0 3609868 131237 None V-2 P.NO 120 IT.NO 13.33.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 50mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 893.32 893.32 40.0 False None None False None False 35732.8 0 3609869 131237 None V2 13.5.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :" 25 mm nominal bore ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 411.35 411.35 12.0 False None None False None False 4936.2 0 3609870 131237 None V2-13.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 740.92 740.92 7.0 False None None False None False 5186.44 0 3609871 131237 None V-2 13.4.3 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 869.78 869.78 9.0 False None None False None False 7828.02 0 3609872 131237 None v2-13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1059.35 1059.35 2.0 False None None False None False 2118.7 0 3609873 131237 None V-2,A-13, IT.NO 13.2.1 Brass bib-cock 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 354.35 354.35 19.0 False None None False None False 6732.65 0 3609874 131237 None V-2 IT.NO 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Ltr 11.15 11.15 3000.0 False None None False None False 33450.0 0 3609875 131237 None V2 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 182.13 182.13 125.0 False None None False None False 22766.25 0 3609876 131237 None Market Rate Providing and fixing 7.50cms to 15cms dia N.P. Grating 100mm dia. (Page.91/I.No.12.111) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 177.0 177.0 55.0 False None None False None False 9735.0 0 3609877 131237 None Market Rate Air Vent Cowel 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 413.0 413.0 12.0 False None None False None False 4956.0 0 3609878 131237 None Market Rate Air Vent Cowel 110mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 590.0 590.0 12.0 False None None False None False 7080.0 0 3609879 131237 None Market Rate Supplying and fixing Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards with a single 15mm C.P. 32mm dia CP waste coupling, 32mmdia heavy duty CP bottle trap with extension pipe, CP wall flanges, 2 Nos.15mm dia C.P. angle cocks, 2nos.C.P. flexible inlet connection pipes, CI brackets etc., complete including silicon sealant filling. (Jaguar make or Equalent ) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6844.0 6844.0 9.0 False None None False None False 61596.0 0 3609880 131237 None Market Rate Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2183.0 2183.0 9.0 False None None False None False 19647.0 0 3609881 131237 None Market Rate Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 95.0 False None None False None False 72865.0 0 3609882 131237 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. a) 65mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4130.0 4130.0 2.0 False None None False None False 8260.0 0 3609883 131237 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. b) 50mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3304.0 3304.0 4.0 False None None False None False 13216.0 0 3609884 131237 None V2 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 345.68 345.68 4.0 False None None False None False 1382.72 0 3609885 131237 None V2 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5335.13 5335.13 18.0 False None None False None False 96032.34 0 3609886 131237 None V2 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with chase cutter and embed ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3455.57 3455.57 10.0 False None None False None False 34555.7 0 3609887 131237 None V2 13.28 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 79.3 79.3 70.0 False None None False None False 5551.0 0 3609888 131237 None 14.36.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 111.51 111.51 23.0 False None None False None False 2564.73 0 3609889 131237 None 14.37.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 379.13 379.13 23.0 False None None False None False 8719.99 0 3609890 131237 None 13.8.1.1 Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 102.84 102.84 23.0 False None None False None False 2365.32 0 3609891 131237 None 14.22.A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1003.59 1003.59 23.0 False None None False None False 23082.57 0 3609892 131237 None 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 768.18 768.18 53.0 False None None False None False 40713.54 0 3609893 131237 None V2 14.63A Providing and fixing Single lever sink mixer with swivel spout top outlet wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4667.31 4667.31 4.0 False None None False None False 18669.24 0 3609894 131237 None 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5518.51 5518.51 4.0 False None None False None False 22074.04 0 3609895 131237 None ELE 7.3 Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3 density Rock wool insulation with 22SWG Aluminium cladding." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 39372.94 39372.94 3.0 False None None False None False 118118.82 0 3609896 131237 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-110mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 944.0 944.0 10.0 False None None False None False 9440.0 0 3609897 131237 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-75mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 2.0 False None None False None False 1534.0 0 3609898 131237 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-160MM dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1298.0 1298.0 1.0 False None None False None False 1298.0 0 3609899 131237 None V-1,P.NO 6,IT.NO 1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 224.0 False None None False None False 67164.16 0 3609900 131237 None V-1 P.NO 7 IT.NO 1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 536.49 536.49 224.0 False None None False None False 120173.76 0 3609901 131237 None V-5 P.NO 134 IT.NO 10.3 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete. for:" Pipes of SN8 Self Fit - 160mm dia. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 764.46 764.46 300.0 False None None False None False 229338.0 0 3609902 131237 None V-5 P.NO 134 IT.NO 10.2.4 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:( For external Rain water Work ). - do - 160 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 713.66 713.66 70.0 False None None False None False 49956.2 0 3609903 131237 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 45.0 False None None False None False 304087.95 0 3609904 131237 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CATCH BASIN) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 15.0 False None None False None False 101362.65 0 3609905 131237 None 13.39 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3197.86 3197.86 25.0 False None None False None False 79946.5 0 3609906 131237 None 16.18 Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting and using of sight rails and boning rods wherever necessary, shoring and strutting wherever required using Ordinary Port Land Cement, using 1:1.5:3 proportion RCC with 20 mm and down graded jelly, well graded sand and steel of approved quality, 200 mm thick top concrete slab, having wall thickness and raft thickness as in approved drawings and with an offset in raft alround the chamber as in approved drawing, benching concrete with 1:6 slope towards the central drain finished smooth, including fixing and grouting of pipes, including conveying to work spot supply and fixing SFRC Machinehole cover and frame (Heavy duty) conforming to IS:12592 with latest amendments, on a bed of CC 1:2:4 Providing and fixing of minimum 3 mm thick encapsulated plastic footsteps (as per IS 10910) on 12 mm dia. Grade Fe-500 steel bar (as per IS 1786) staggered at 300 mm apart as detailed in Technical specifications, including stone grit beding wherever required, watering, curing, engraving Machinehole number with flow direction on the inner cylindrical surface etc., complete including cost of reinforcement steel and fabrication charges and also cost and conveyance of all materials, labour with all lead and lifts. The Pre-cast RCC Machinehole are for various diamters and depths as stated below and as per detailed drawings, specifications and direction of the Engineer. For 1.2m dia Machinehole:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 97246.63 97246.63 1.0 False None None False None False 97246.63 0 3609907 131237 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 80.0 False None None False None False 47280.0 0 3609908 131237 None 13.23 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (50 mm nominal bore, 242mm long, weighing not less than 1240 g) T. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1665.22 1665.22 5.0 False None None False None False 8326.1 0 3609909 131237 None 13.40.1 V-5 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. (pump room collection sump pumps) (2 HP, Size 65x50 Head 13M, Discharge 462 LPM) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19340.79 19340.79 2.0 False None None False None False 38681.58 0 3609910 131237 None 13.32 V-5 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 8053.5 8053.5 2.0 False None None False None False 16107.0 0 3609911 131237 None PWD ELE SR V-6 IT.NO 2.2.1 WIRES & CABLES Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 333.29 333.29 25.0 False None None False None False 8332.25 0 3609912 131237 None PWD ELE SR V-10 IT.NO 2.2.2 Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Pack 469.58 469.58 36.0 False None None False None False 16904.88 0 3609913 131237 None PWD ELE SR V-11 IT.NO 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 687.65 687.65 63.0 False None None False None False 43321.95 0 3609914 131237 None PWD ELE SR V-12 IT.NO 2.2.4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 838.8 838.8 8.0 False None None False None False 6710.4 0 3609915 131237 None PWD ELE SR V-14 IT.NO 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 170.98 170.98 25.0 False None None False None False 4274.5 0 3609916 131237 None PWD ELE SR V-15 IT.NO 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 197.0 197.0 32.0 False None None False None False 6304.0 0 3609917 131237 None PWD ELE SR V-16 IT.NO 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 219.3 219.3 16.0 False None None False None False 3508.8 0 3609918 131237 None PWD ELE SR V-17 IT.NO 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 272.58 272.58 7.0 False None None False None False 1908.06 0 3609919 131237 None PWD ELE SR V-18 IT.NO 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 323.38 323.38 20.0 False None None False None False 6467.6 0 3609920 131237 None PWD ELE SR V-20 IT.NO 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 199.48 199.48 32.0 False None None False None False 6383.36 0 3609921 131237 None PWD ELE SR V-21 IT.NO 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 216.83 216.83 16.0 False None None False None False 3469.28 0 3609922 131237 None PWD ELE SR V-22 IT.NO 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 289.93 289.93 7.0 False None None False None False 2029.51 0 3609923 131237 None PWD ELE SR V-23 IT.NO 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 351.88 351.88 21.0 False None None False None False 7389.48 0 3609924 131237 None PWD ELE SR V-24 IT.NO 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 426.22 426.22 31.0 False None None False None False 13212.82 0 3609925 131237 None PWD ELE SR V-26 IT.NO 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 126.38 126.38 217.0 False None None False None False 27424.46 0 3609926 131237 None PWD ELE SR V-6 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 205.67 205.67 2.0 False None None False None False 411.34 0 3609927 131237 None PWD ELE SR V-6,IT.NO 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 211.87 211.87 81.0 False None None False None False 17161.47 0 3609928 131237 None PWD ELE SR V-6,IT.NO 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 442.32 442.32 24.0 False None None False None False 10615.68 0 3609929 131237 None PWD ELE SR V-6,IT.NO 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 223.02 223.02 10.0 False None None False None False 2230.2 0 3609930 131237 None PWD ELE SR V-6, IT.NO 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 403.91 403.91 15.0 False None None False None False 6058.65 0 3609931 131237 None PWD ELE SR V-6,IT.NO 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 292.4 292.4 25.0 False None None False None False 7310.0 0 3609932 131237 None PWD ELE SR V-6,IT.NO 1.13 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 144.96 144.96 24.0 False None None False None False 3479.04 0 3609933 131237 None PWD ELE SR V-6,IT.NO-1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 81.77 81.77 890.0 False None None False None False 72775.3 0 3609934 131237 None PWD ELE SR V-6,IT.NO 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 96.64 96.64 1030.0 False None None False None False 99539.2 0 3609935 131237 None PWD ELE SR V-6, IT.NO .2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 127.62 127.62 250.0 False None None False None False 31905.0 0 3609936 131237 None PWD ELE SR V-6,IT.NO1.3.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 84.25 84.25 445.0 False None None False None False 37491.25 0 3609937 131237 None PWD ELE SR V-6,IT.NO-1.3.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 97.88 97.88 515.0 False None None False None False 50408.2 0 3609938 131237 None PWD ELE SR V-6,IT.NO-1.3.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 122.66 122.66 150.0 False None None False None False 18399.0 0 3609939 131237 None PWD ELE SR V-6,IT.NO 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 32.21 32.21 470.0 False None None False None False 15138.7 0 3609940 131237 None PWD ELE SR V-6,IT.NO 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 52.04 52.04 1530.0 False None None False None False 79621.2 0 3609941 131237 None PWD ELE SR V-6,IT.NO 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 78.06 78.06 740.0 False None None False None False 57764.4 0 3609942 131237 None PWD ELE SR V-6,IT.NO 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 113.99 113.99 580.0 False None None False None False 66114.2 0 3609943 131237 None PWD ELE SR V-6,IT.NO 5.19.11 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5003.08 5003.08 2.0 False None None False None False 10006.16 0 3609944 131237 None PWD ELE SR V-6,IT.NO 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 6-32Amps SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 62.0 False None None False None False 31879.78 0 3609945 131237 None PWD ELE SR V-6 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 40Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3771.52 3771.52 2.0 False None None False None False 7543.04 0 3609946 131237 None PWD ELE SR V-6,IT.NO 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5299.2 5299.2 2.0 False None None False None False 10598.4 0 3609947 131237 None PWD ELE SR V-6,IT.NO 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 480.73 480.73 10.0 False None None False None False 4807.3 0 3609948 131237 None PWD ELE SR V-6,IT.NO 6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39.65 39.65 16.0 False None None False None False 634.4 0 3609949 131237 None V-6 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4348.89 4348.89 7.0 False None None False None False 30442.23 0 3609950 131237 None V-6 12.58.2 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 101.6 101.6 100.0 False None None False None False 10160.0 0 3609951 131237 None 12.58.6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600X600X3 GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1084.13 1084.13 6.0 False None None False None False 6504.78 0 3609952 131237 None 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10 12W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1096.52 1096.52 19.0 False None None False None False 20833.88 0 3609953 131237 None 11.5.3 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1640.44 1640.44 5.0 False None None False None False 8202.2 0 3609954 131237 None 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 854.91 854.91 51.0 False None None False None False 43600.41 0 3609955 131237 None 11.11.3 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 184.61 184.61 15.0 False None None False None False 2769.15 0 3609956 131237 None PWD ELE SR V-6,IT.NO 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1848.59 1848.59 13.0 False None None False None False 24031.67 0 3609957 131237 None PWD ELE SR V-6,IT.NO 6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3316.8 3316.8 24.0 False None None False None False 79603.2 0 3609958 131237 None PWD ELE SR V-6,IT.NO 13.11 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 390.29 390.29 24.0 False None None False None False 9366.96 0 3609959 131237 None PWD ELE SR V-6,IT.NO 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 151.16 151.16 83.0 False None None False None False 12546.28 0 3609960 131237 None PWD ELE SR V-6,IT.NO 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 875.97 875.97 13.0 False None None False None False 11387.61 0 3609961 131237 None PWD ELE SR V-6,IT.NO 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 200.72 200.72 3.0 False None None False None False 602.16 0 3609962 131237 None PWD ELE SR V-6,IT.NO 5.42.1 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 86000.0 False None None False None False 45580.0 0 3609963 131237 None PWD ELE SR V-6,IT.NO 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 5.0 False None None False None False 21279.85 0 3609964 131237 None PWD ELE SR V-6,IT.NO 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 10.0 False None None False None False 3779.0 0 3609965 131237 None PWD ELE SR V-6,IT.NO 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 10.0 False None None False None False 9366.8 0 3609966 131237 None PWD ELE SR V-6,IT.NO 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) 100Amps 25kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 10515.39 10515.39 1.0 False None None False None False 10515.39 0 3609967 131237 None PWD ELE SR V-6,iT.NO 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps DP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 10.0 False None None False None False 38260.3 0 3609968 131237 None PWD ELE SR V-6,IT.NO 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11541.29 11541.29 1.0 False None None False None False 11541.29 0 3609969 131237 None PWD ELE SR V-6,IT.NO 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3609970 131237 None PWD ELE SR V-6,IT.NO 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 696.32 696.32 3.0 False None None False None False 2088.96 0 3609971 131237 None PWD ELE SR V-6,IT.NO5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 15.0 False None None False None False 8920.8 0 3609972 131237 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way SP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2885.63 2885.63 2.0 False None None False None False 5771.26 0 3609973 131237 None 5.19.12 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6120.66 6120.66 1.0 False None None False None False 6120.66 0 3609974 131237 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 1.0 False None None False None False 3826.03 0 3609975 131237 None 5.20.8 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6377.13 6377.13 3.0 False None None False None False 19131.39 0 3609976 131237 None 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 109549.9 109549.9 0.1 False None None False None False 10954.99 0 3609977 131237 None 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 35 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 190882.82 190882.82 0.05 False None None False None False 9544.141 0 3609978 131237 None 32.13 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 70 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 393892.97 393892.97 0.1 False None None False None False 39389.297 0 3609979 131237 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.05 False None None False None False 1293.8875 0 3609980 131237 None 31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 38581.22 38581.22 0.2 False None None False None False 7716.244 0 3609981 131237 None 6.17.6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 15.41 15.41 20.0 False None None False None False 308.2 0 3609982 131237 None 16.17.10 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 70 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 148.68 148.68 16.0 False None None False None False 2378.88 0 3609983 131237 None 11.11.5 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 333.29 333.29 9.0 False None None False None False 2999.61 0 3609984 131237 None 11.6.3 Supplying of recess mounting non integral type .LED . W luminaire comprising of pressure decastextruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' 34 36watt ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5641.17 5641.17 8.0 False None None False None False 45129.36 0 3609985 131237 None 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4985.74 4985.74 2.0 False None None False None False 9971.48 0 3609986 131237 None 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1810.18 1810.18 3.0 False None None False None False 5430.54 0 3609987 131237 None 5.14.1 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 2738.19 2738.19 2.0 False None None False None False 5476.38 0 3609988 131237 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 169.74 169.74 24.0 False None None False None False 4073.76 0 3609989 131237 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 395.24 395.24 31.0 False None None False None False 12252.44 0 3609990 131237 None 2.2.5 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 1225.37 1225.37 4.0 False None None False None False 4901.48 0 3609991 131237 None 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 144.96 144.96 6.0 False None None False None False 869.76 0 3609992 131237 None 12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 78.06 78.06 21.0 False None None False None False 1639.26 0 3609993 131237 None 3.6.11 TV/Telephone socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 193.28 193.28 2.0 False None None False None False 386.56 0 3609994 131237 None 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 304.79 304.79 1.0 False None None False None False 304.79 0 3609995 131237 None 32.02 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 2 core 10 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 98168.45 98168.45 0.1 False None None False None False 9816.845 0 3609996 131237 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.1 False None None False None False 2587.775 0 3609997 131237 None pwd sr Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 15.41 15.41 15.0 False None None False None False 231.15 0 3609998 131237 None 11..11.7 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500-degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 527.81 527.81 3.0 False None None False None False 1583.43 0 3609999 131237 None 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 64.43 64.43 2.0 False None None False None False 128.86 0 3610000 131237 None 11.8.1 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 25watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3004.58 3004.58 1.0 False None None False None False 3004.58 0 3610001 131237 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers32Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 298.6 298.6 1.0 False None None False None False 298.6 0 3610002 131237 None 5.30 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1709.82 1709.82 1.0 False None None False None False 1709.82 0 3610003 131237 None 7.1.3 Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting.25Litres ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 12689.84 12689.84 1.0 False None None False None False 12689.84 0 3610004 131237 None PWD SR 2023-24 Volume 6 It No-9.3.3 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. 5 kVA ON LINE UPS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 84726.54 84726.54 1.0 False None None False None False 84726.54 0 3610005 131237 None PWD SR 2023-24 Volume 6 It No-9.5.9 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150AH capacity ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19693.91 19693.91 4.0 False None None False None False 78775.64 0 3610006 131237 None A.R Item Name : The Tenderer (agency) should arrange to obtain (get), detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration &proof checking by reputedGovernment/Semi Government/IISC /IIT/NIT/or as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, 3D view, MFP design and Drawings, Internal and External Electrical services including electrical infrastructure, etc. Interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project and 6 sets of as built drawings should be submitted to the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 300000.0 300000.0 1.0 False None None False None False 300000.0 0 3610007 131237 None LQR IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),30M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 23836.0 23836.0 4.0 False None None False None False 95344.0 0 3610008 131237 None LQR IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),60M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 25606.0 25606.0 2.0 False None None False None False 51212.0 0 3610009 131237 None LQR Supplying, installation, testing and commissioning of SITC of complete 8 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up to 16 channels),internal storage supports 8HDDs expandable up to 64TB (8TB each),operating temperatures(-10 degree C) and (55 degree C),UL,CE,FCC. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3610010 131237 None LQR Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17110.0 17110.0 2.0 False None None False None False 34220.0 0 3610011 131237 None LQR Supply and Installation of I/Os ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 147.5 147.5 12.0 False None None False None False 1770.0 0 3610012 131237 None LQR Supply and Installation of 2 Mtrs Patch Chord The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 265.5 265.5 12.0 False None None False None False 3186.0 0 3610013 131237 None LQR Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 336.3 336.3 6.0 False None None False None False 2017.8 0 3610014 131237 None LQR Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3610015 131237 None V-6 8.1 Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 600.0 False None None False None False 28248.0 0 3610016 131237 None 1.2.2 Supplying heavy gauge PVC Consealed conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 96.64 96.64 500.0 False None None False None False 48320.0 0 3610017 131237 None 8.12.3 Supplying & Fixing of Patch panel for LAN cabling .16 Port 10/100 patch panel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3778.95 3778.95 1.0 False None None False None False 3778.95 0 3610018 131237 None 8.4.1 v-6 Supplying & Fixing of switch mounting rack with power manager & Cable manager 4U with 450mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6061.19 6061.19 1.0 False None None False None False 6061.19 0 3610019 131237 None 1.01 Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 8767.16 8767.16 8.0 False None None False None False 70137.28 0 3610020 131237 None 2.02 Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1379.01 1379.01 8.0 False None None False None False 11032.08 0 3610021 131237 None 6.05 Supply of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 107.79 107.79 6.0 False None None False None False 646.74 0 3610022 131237 None 13.12 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 6.0 False None None False None False 356.82 0 3610023 131237 None 2.16 Supply of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 296.12 296.12 11.0 False None None False None False 3257.32 0 3610024 131237 None 2.16 Erection of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 115.23 115.23 11.0 False None None False None False 1267.53 0 3610025 131237 None 68.17 Supply and fixing of Caution/Danger Board ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 185.85 185.85 6.0 False None None False None False 1115.1 0 3610026 131237 None 4.02 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 110.27 110.27 8.0 False None None False None False 882.16 0 3610027 131237 None 5.09 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 52.04 52.04 8.0 False None None False None False 416.32 0 3610028 131237 None 24.05 Supply and fixing of 11 kV, 400 Amps Double Break GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 26341.14 26341.14 1.0 False None None False None False 26341.14 0 3610029 131237 None 24.07 Supply and fixing of H-Frame for mounting GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7521.97 7521.97 1.0 False None None False None False 7521.97 0 3610030 131237 None 25.01 Supply of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 7279.13 7279.13 1.0 False None None False None False 7279.13 0 3610031 131237 None 13.01 Erection of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 293.64 293.64 1.0 False None None False None False 293.64 0 3610032 131237 None 13.07 Supply, erection, testing and commissioning of 63 KVA 5Star rated Aluminium wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, , oil level indicator with + 5% to -10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 210958.34 210958.34 1.0 False None None False None False 210958.34 0 3610033 131237 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 4348.89 4348.89 8.0 False None None False None False 34791.12 0 3610034 131237 None 12.58.3 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work MT 158.59 158.59 100.0 False None None False None False 15859.0 0 3610035 131237 None 12.58.9 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2035.68 2035.68 100.0 False None None False None False 203568.0 0 3610036 131237 None 12.58.11 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 9194.62 9194.62 10.0 False None None False None False 91946.2 0 3610037 131237 None 45.07 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Outdoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 5039.01 5039.01 4.0 False None None False None False 20156.04 0 3610038 131237 None 45.04 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Indoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 3887.98 3887.98 2.0 False None None False None False 7775.96 0 3610039 131237 None 36.01 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 1102296.17 1102296.17 0.1 False None None False None False 110229.617 0 3610040 131237 None 38. Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1222.89 1222.89 150.0 False None None False None False 183433.5 0 3610041 131237 None 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 176000.0 False None None False None False 93280.0 0 3610042 131237 None 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 6.0 False None None False None False 25535.82 0 3610043 131237 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 12.0 False None None False None False 4534.8 0 3610044 131237 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 12.0 False None None False None False 11240.16 0 3610045 131237 None 5.15.15 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 250Amps 35kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 29172.26 29172.26 1.0 False None None False None False 29172.26 0 3610046 131237 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3610047 131237 None 10.1.3 Supplying, installing, testing and commissioning of 25KVA/20kw Diesel Generator set(CPCB-4) with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 Generator set specificationsEngine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have + 1.0 % Voltage regulation (max) in static conditions- IP: 23 protections with insulation class H. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lamps for ‘Load On’ and ‘Set Running’, Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections. Genset Controller: microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface, Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory, Provide Alternator Data. Voltage (1 ph or 3 ph line to line and line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph and total), Frequency, Provide Engine Data, Starting battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Meter calibration, Engine controls, Power Start operates on 12 VDC batteries,- Auto start mode accepts a ground signal from remote devices to automatically start the DG set. The remote start will also wake up the control system from sleep mode. Acoustic enclosure: The acoustic enclosure shall be made of 1.6 mm thick CRCA sheets in suitable approved shade and a structural/ sheet metal base frame painted in black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75dBA at 1 mtr sound levels specified by Ministry of Environment & Forest. The enclosure has the following features: Specially designed to meet stringent MOEF/ CPCB norms of 75dBA @ 1mtr at 75% load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 558914.14 558914.14 1.0 False None None False None False 558914.14 0 3610048 131237 None 10.2.2 Supply, Erection, testing and commissioning of AMF panel suitable for .KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .amps 4 pole contactor for alternator with thermal O/L relay,. Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and flat/Boost facility. 25 KVA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 72742.93 72742.93 1.0 False None None False None False 72742.93 0 3610049 131237 None A.R Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 3540.0 3540.0 5.0 False None None False None False 17700.0 0 3610050 131237 None A.R Supply and laying of 2Cx2.5SQ MM and 6CX2.5 SQ MM Sheilded Sensor and control Cables ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 236.0 236.0 50.0 False None None False None False 11800.0 0 3610051 131237 None 58.02 LT Metering Cubicle at Low Tension for 50KW to 150KW having specification and design as per the prototype approval (Excluding Meter cost and modem cost) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 98973.8 98973.8 1.0 False None None False None False 98973.8 0 3610052 131237 None 53.01 CT PT Operated ETV Meter 0.2s Accuracy class with ABT feature and DLMS protocal with ToD with RS232 Port UNIDIRACTIONAL ( Used for HT Installation, LT Metering Cubicle (50-150KW) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 24302.99 24302.99 1.0 False None None False None False 24302.99 0 3610053 131237 None 10.01 Supply and fixing of PG Clamps for Rabbit Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 173.46 173.46 15.0 False None None False None False 2601.9 0 3610054 131237 None v-6 2.02 Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 603.39 603.39 6.0 False None None False None False 3620.34 0 3610055 131237 None v-6 2.02 Erection of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 318.42 318.42 6.0 False None None False None False 1910.52 0 3610056 131237 None v-6 6.06 Supply and fixing of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 254.0 254.0 18.0 False None None False None False 4572.0 0 3610057 131237 None v-6 6.10 Supply and fixing of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 235.45 235.45 18.0 False None None False None False 4238.1 0 3610058 131237 None 13.12 v-6 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 18.0 False None None False None False 1070.46 0 3610059 131237 None v-6 6.08 Supply and fixing of 15 Strain Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 73.1 73.1 4.0 False None None False None False 292.4 0 3610060 131237 None 7.02 Supply of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 57283.93 57283.93 1.0 False None None False None False 57283.93 0 3610061 131237 None 6.02 V-6 Erection of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 5403.28 5403.28 1.0 False None None False None False 5403.28 0 1721828234000 0 None None Buildings KANPUR SH IN SHORAPUR TALUK OF YADGIR DISTRICT 34741282.93 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3610062 131238 None CSR:V-3 PAGE NO 9 Itm 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work 100 Sqm 486.93 486.93 17.49 False None None False None False 8516.4057 0 3610063 131238 None V-1 page 8 itm 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 117.71 117.71 768.64 False None None False None False 90476.6144 0 3610064 131238 None V-1page 8 itm 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 126.38 126.38 1311.57 False None None False None False 165756.2166 0 3610065 131238 None V-1page 8 itm 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 449.76 449.76 230.53 False None None False None False 103683.1728 0 3610066 131238 None V-3page 3 A Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 167.27 167.27 225.13 False None None False None False 37657.4951 0 3610067 131238 None V-2page5 itm 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 146.2 146.2 774.16 False None None False None False 113182.192 0 3610068 131238 None V-1pg7 itm1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 329.57 329.57 807.35 False None None False None False 266078.3395 0 3610069 131238 None V-1page7vitm1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 587.29 587.29 728.89 False None None False None False 428069.8081 0 3610070 131238 None V-1page 15 itm2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7420.37 7420.37 161.37 False None None False None False 1197425.1069 0 3610071 131238 None V-1page15 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR FOOTING ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8478.33 8478.33 177.95 False None None False None False 1508718.8235 0 3610072 131238 None V-1page16 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatess FOR PEDESTAL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8635.33 8635.33 13.4 False None None False None False 115713.422 0 3610073 131238 None V-1page15itm 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR COLUMNS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 55.14 False None None False None False 794755.4274 0 3610074 131238 None V-3page135itm15.4 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 252.76 252.76 13.0 False None None False None False 3285.88 0 3610075 131238 None V-2page55 itm 8.16.a Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1533.88 1533.88 13.81 False None None False None False 21182.8828 0 3610076 131238 None V-1page18itm2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. - Buildings ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Tonne 110837.22 110837.22 50.82 False None None False None False 5632747.5204 0 3610077 131238 None 18-19SR ITM4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No KBS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 38.94 38.94 145.02 False None None False None False 5647.0788 0 3610078 131238 None DATA RATE Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 86.14 86.14 145.02 False None None False None False 12492.0228 0 3610079 131238 None V-2PAGE 9 ITM5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7915.97 7915.97 8.76 False None None False None False 69343.8972 0 3610080 131238 None V-2PAGE 14 ITM 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1623.09 1623.09 1313.93 False None None False None False 2132626.6437 0 3610081 131238 None V-2page 14 itm 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1367.86 1367.86 171.24 False None None False None False 234232.3464 0 3610082 131238 None V-2 page100 itm 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 122431.79 122431.79 1.2 False None None False None False 146918.148 0 3610083 131238 None V-2 page 105 itm 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1258.82 1258.82 32.0 False None None False None False 40282.24 0 3610084 131238 None 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 681.45 681.45 64.0 False None None False None False 43612.8 0 3610085 131238 None 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 464.63 464.63 32.0 False None None False None False 14868.16 0 3610086 131238 None 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 64.0 False None None False None False 11894.4 0 3610087 131238 None 22.15.9 PProviding and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 86.73 86.73 128.0 False None None False None False 11101.44 0 3610088 131238 None 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 123.9 123.9 32.0 False None None False None False 3964.8 0 3610089 131238 None 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1303.43 1303.43 32.0 False None None False None False 41709.76 0 3610090 131238 None V-2page69 itm 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 74.34 74.34 192.0 False None None False None False 14273.28 0 3610091 131238 None 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 168.45 False None None False None False 10853.2335 0 3610092 131238 None V-2page105 itm 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4115.96 4115.96 74.84 False None None False None False 308038.4464 0 3610093 131238 None V-2page109 itm 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 8343.43 8343.43 69.39 False None None False None False 578950.6077 0 3610094 131238 None V-2page109 itm 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 7085.84 7085.84 6.84 False None None False None False 48467.1456 0 3610095 131238 None V-2page 86itm11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 208.15 208.15 1600.83 False None None False None False 333212.7645 0 3610096 131238 None V-2page 111itm 12.93.1 Providing and fixing factory made single extruded WPC (WoodPolymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Size 62 x 100mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work m 869.78 869.78 64.35 False None None False None False 55970.343 0 3610097 131238 None V-2page84 itm 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kgs 168.5 168.5 1724.91 False None None False None False 290647.335 0 3610098 131238 None V-2page 41itm 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 386.57 386.57 1763.82 False None None False None False 681839.8974 0 3610099 131238 None V-2page 43 itm 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 261.43 261.43 1176.83 False None None False None False 307658.6669 0 3610100 131238 None V-2page50 itm 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 123.9 123.9 2919.03 False None None False None False 361667.817 0 3610101 131238 None V-2page42itm 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 432.41 432.41 975.48 False None None False None False 421807.3068 0 3610102 131238 None V-2page41 itm 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 438.61 438.61 163.05 False None None False None False 71515.3605 0 3610103 131238 None 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 2013.85 False None None False None False 94812.058 0 3610104 131238 None 10.5.2 Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 254.88 254.88 13.0 False None None False None False 3313.44 0 3610105 131238 None V-2page 54itm 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 628.05 False None None False None False 40465.2615 0 3610106 131238 None V-2page61itm 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1455.83 1455.83 580.89 False None None False None False 845677.0887 0 3610107 131238 None V-2page59 itm9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 991.2 991.2 71.5 False None None False None False 70870.8 0 3610108 131238 None V-2page63 itm 9.32 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3199.1 3199.1 34.54 False None None False None False 110496.914 0 3610109 131238 None V-2page 4 itm 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 365.51 365.51 316.07 False None None False None False 115526.7457 0 3610110 131238 None V-2page 60 itm 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1101.47 1101.47 59.14 False None None False None False 65140.9358 0 3610111 131238 None V-2page65 itmv9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1795.31 1795.31 259.57 False None None False None False 466008.6167 0 3610112 131238 None V-2 page85 itm11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 700.04 700.04 357.82 False None None False None False 250488.3128 0 3610113 131238 None V-2 page 48itm 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 157.35 157.35 2741.14 False None None False None False 431318.379 0 3610114 131238 None V-2page 46itm8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 193.28 193.28 759.66 False None None False None False 146827.0848 0 3610115 131238 None V-2page47 itm8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 61.95 61.95 96.21 False None None False None False 5960.2095 0 3610116 131238 None V-2page48 itm 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 142.49 142.49 76.23 False None None False None False 10862.0127 0 3610117 131238 None V-2page47itm 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 65.67 65.67 179.6 False None None False None False 11794.332 0 3610118 131238 None 8.82 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 838.8 838.8 179.6 False None None False None False 150648.48 0 3610119 131238 None V-2page64itm 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2044.35 2044.35 17.32 False None None False None False 35408.142 0 3610120 131238 None V-2page77 itm 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5548.24 5548.24 5.25 False None None False None False 29128.26 0 3610121 131238 None 15.12 Newly Constructed Roof/Podium with PU Waterproof coating Above 500 m2. Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids 85%, Tensile strength 2 Mpa as per ASTM D 412, Elongation at break 400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness 55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo textile over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1443.44 1443.44 726.5 False None None False None False 1048659.16 0 3610122 131238 None V-2PAGE22 ITM 7.17 Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers over the existing purlins, rafters and trusses including cost of materials, labour, complete as per specifications ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 411.35 411.35 24.74 False None None False None False 10176.799 0 3610123 131238 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR PLINTH BEAM ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 102.35 False None None False None False 1301658.642 0 3610124 131238 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC BEAMS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 51.01 False None None False None False 691979.2156 0 3610125 131238 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC SLAB ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 115.4 False None None False None False 1467624.888 0 3610126 131238 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC STARICASE ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 7.07 False None None False None False 89914.2804 0 3610127 131238 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR LINTEL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 12.12 False None None False None False 164414.5872 0 3610128 131238 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11911.13 11911.13 14.18 False None None False None False 168899.8234 0 3610129 131238 None 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4317.92 4317.92 20.48 False None None False None False 88431.0016 0 3610130 131238 None 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 141.25 141.25 36.0 False None None False None False 5085.0 0 3610131 131238 None 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1642.91 1642.91 56.5 False None None False None False 92824.415 0 3610132 131238 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 30.54 False None None False None False 201606.4506 0 3610133 131238 None 10.1.2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4877.94 4877.94 9.69 False None None False None False 47267.2386 0 3610134 131238 None 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 761.99 761.99 92.01 False None None False None False 70110.6999 0 3610135 131238 None 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 350.64 350.64 215.82 False None None False None False 75675.1248 0 3610136 131238 None 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 68.92 False None None False None False 24849.106 0 3610137 131238 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3533.63 3533.63 11.09 False None None False None False 39187.9567 0 3610138 131238 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 13.73 False None None False None False 90637.0847 0 3610139 131238 None 10.1.1 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4963.43 4963.43 3.81 False None None False None False 18910.6683 0 3610140 131238 None 1.4.1 V-1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 11.06 False None None False None False 3316.2304 0 3610141 131238 None 1.4.2 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 320.9 320.9 1.7 False None None False None False 545.53 0 3610142 131238 None 17.5 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1391.4 1391.4 7.0 False None None False None False 9739.8 0 3610143 131238 None 17.1 V-2 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1241.48 1241.48 0.28 False None None False None False 347.6144 0 3610144 131238 None 17.2 V-2 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1469.45 1469.45 0.14 False None None False None False 205.723 0 3610145 131238 None 17. V-2 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1476.89 1476.89 0.14 False None None False None False 206.7646 0 3610146 131238 None 17.4 V-2 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1659.02 1659.02 0.14 False None None False None False 232.2628 0 3610147 131238 None 17.14 V-2 Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 @ 6kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1449.63 1449.63 1.0 False None None False None False 1449.63 0 3610148 131238 None V3 305.3.4 Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 130.1 130.1 72.0 False None None False None False 9367.2 0 3610149 131238 None V-3 4.2 Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 2922.8 2922.8 36.0 False None None False None False 105220.8 0 3610150 131238 None V3 6.1 ISSUE RATE Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 MPa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 6095.88 6095.88 24.0 False None None False None False 146301.12 0 3610151 131238 None V-3 6.2 ISSUE RATE Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11107.64 11107.64 48.0 False None None False None False 533166.72 0 3610152 131238 None V-3 8.10 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 105.32 105.32 15.0 False None None False None False 1579.8 0 3610153 131238 None V-3 Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 87.97 87.97 448.0 False None None False None False 39410.56 0 3610154 131238 None V-314621A Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 250 x 100 mm Kerb Stone ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 296.12 296.12 150.0 False None None False None False 44418.0 0 3610155 131238 None 2.1.4 V-1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7702.86 7702.86 2.0 False None None False None False 15405.72 0 3610156 131238 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9156.76 9156.76 10.8 False None None False None False 98893.008 0 3610157 131238 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 459.67 459.67 320.0 False None None False None False 147094.4 0 3610158 131238 None 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 220.54 220.54 320.0 False None None False None False 70572.8 0 3610159 131238 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (FOR COMPOUND WALL) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8761.09 8761.09 9.36 False None None False None False 82003.8024 0 3610160 131238 None 8.20 V-3 Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 672.78 672.78 390.0 False None None False None False 262384.2 0 3610161 131238 None V1 1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Depth exceeding 1.5 m, but not exceeding 3 m FOR SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 526.58 526.58 22.51 False None None False None False 11853.3158 0 3610162 131238 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Raft for Water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8732.83 8732.83 4.32 False None None False None False 37725.8256 0 3610163 131238 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Outer wall water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9326.32 9326.32 5.89 False None None False None False 54932.0248 0 3610164 131238 None V2 15.14 UGT/OHT (inside) waterproofing with Antimicrobial CoatingProviding and Applying two component, waterbased food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 300 of US FDA, having mixing Ratio (Base: Hardener: Water) 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster, and that Item No. 4 is completed across the entire surface prior to applying the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2072.85 2072.85 36.6 False None None False None False 75866.31 0 3610165 131238 None V5 18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2430.92 2430.92 8.0 False None None False None False 19447.36 0 3610166 131238 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RC WALL FOR SEPTIC TANK ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 9.87 False None None False None False 142260.3567 0 3610167 131238 None 15.5 V-2 Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of 25 MPa (as per ASTM D 412), elongation of 500% (as per ASTM D 412), puncture resistance of 1000N (as per ASTM E 154), peel adhesion to concrete 1200N/m (as per ASTM D 903), hydrostatic head resistance 70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self adhesive polymer layer, etc, including surface preparation completely as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 749.6 749.6 63.57 False None None False None False 47652.072 0 3610168 131238 None 8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 110.27 110.27 20.1 False None None False None False 2216.427 0 3610169 131238 None V-5P140I12.4 Geophysical investigation of site for sinking Borewell for supplying drinking water to Habitation either through the Handpump, MWS or PWSS by vertical sounding by adopting veener sounding by adopting veener or schlumbergers's including reconassiance of survey of Geological formation,geophysical investigation of existing ground water in the vicinity quality, quantity and acceptability of the user including the location of site,recommended department of casing pipe required to seal the top and consolidated formation including an extra depth of 1.00Mtr in consolidated formation including an extra depth of drilling required to cover full depth of occupier proposed to trap probable yield and other information required including transportation of instrument and accessories to work site engaging technical personnel labour required etc complete as directed by Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6551.83 6551.83 1.0 False None None False None False 6551.83 0 3610170 131238 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 458.43 458.43 50.0 False None None False None False 22921.5 0 3610171 131238 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above 50 Mtrs and upto 100 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 574.9 574.9 50.0 False None None False None False 28745.0 0 3610172 131238 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above100 Mtrs. and upto 150 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 610.83 610.83 50.0 False None None False None False 30541.5 0 3610173 131238 None V-5P143I12.32 Supply Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2394.99 2394.99 20.0 False None None False None False 47899.8 0 3610174 131238 None V-5P155I13.28 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 681.45 681.45 150.0 False None None False None False 102217.5 0 3610175 131238 None V-5P143I12.33 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 1.0 False None None False None False 185.85 0 3610176 131238 None V-5P154I12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 203.2 203.2 1.0 False None None False None False 203.2 0 3610177 131238 None 18-19 SR13.81.3 Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 260.19 260.19 1.0 False None None False None False 260.19 0 3610178 131238 None V-5P154I13.11.5 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00" - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. 5.00 HP - 90 LPM @ 66 m = 10 STG Outlet Dia - 2.00" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39817.74 39817.74 1.0 False None None False None False 39817.74 0 3610179 131238 None V-5P155I13.23 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter Up to 6 HP - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11832.45 11832.45 1.0 False None None False None False 11832.45 0 3610180 131238 None V-5P155I13.29 Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets. complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1920.45 1920.45 1.0 False None None False None False 1920.45 0 3610181 131238 None V-5P155I13.31 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 49.56 49.56 100.0 False None None False None False 4956.0 0 3610182 131238 None V-5P156I13.32 Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job. as per specifications, with testing of as per instructions of engineer incharge of work - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 8053.5 8053.5 1.0 False None None False None False 8053.5 0 3610183 131238 None V-5P156I13.33 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 1672.65 1672.65 1.0 False None None False None False 1672.65 0 3610184 131238 None 2.6.2 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4 mm2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 208.15 208.15 165.0 False None None False None False 34344.75 0 3610185 131238 None V-5P20I5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour enameled metal paint etc., complete 16 SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 30000.0 False None None False None False 15900.0 0 3610186 131238 None V-5P21I5.44.4 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase /Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600mmx600mmx170mm. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17990.28 17990.28 1.0 False None None False None False 17990.28 0 3610187 131238 None 5.6.6 V-6 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20" x 2.5" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 404.08 404.08 1.0 False None None False None False 404.08 0 3610188 131238 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 1.0 False None None False None False 514.19 0 3610189 131238 None 13.18.1 Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15A to 63A TPST ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 344.44 344.44 1.0 False None None False None False 344.44 0 3610190 131238 None 5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 1.0 False None None False None False 594.72 0 3610191 131238 None V-2 13.50.5 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm dia pipes, From wash basin waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 376.66 376.66 50.0 False None None False None False 18833.0 0 3610192 131238 None V-2 13.50.6 Providing and fixing normal gauge polythene pipes of approved quality Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm dia pipes, From sink & urinal waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 478.25 478.25 20.0 False None None False None False 9565.0 0 3610193 131238 None V-2 13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 358.07 358.07 185.0 False None None False None False 66242.95 0 3610194 131238 None V-2 13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 477.02 477.02 120.0 False None None False None False 57242.4 0 3610195 131238 None V-2 IT.NO 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 244.08 244.08 35.0 False None None False None False 8542.8 0 3610196 131238 None V-2 IT.NO 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 50.0 False None None False None False 18027.5 0 3610197 131238 None V-2 P.NO 128 IT.NO 13.63 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 302.32 302.32 55.0 False None None False None False 16627.6 0 3610198 131238 None V-2 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1511.58 1511.58 21.0 False None None False None False 31743.18 0 3610199 131238 None V-2 P.NO 127 IT.NO 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6891.32 6891.32 4.0 False None None False None False 27565.28 0 3610200 131238 None V-2 P.NO 130 IT.NO 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 614.54 614.54 4.0 False None None False None False 2458.16 0 3610201 131238 None V-2 P.NO 123 IT.NO 14.38 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 179.66 179.66 4.0 False None None False None False 718.64 0 3610202 131238 None V-2 P.NO 178 IT.NO 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :: W.C. pan with ISI marked white solid plastic seat and lid" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7405.5 7405.5 9.0 False None None False None False 66649.5 0 3610203 131238 None V-2 P.NO 124 IT.NO14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6051.28 6051.28 10.0 False None None False None False 60512.8 0 3610204 131238 None V-2 P.NO 126 IT.NO 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6296.6 6296.6 2.0 False None None False None False 12593.2 0 3610205 131238 None V-2 P.NO 126 IT.NO 14.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (510x1040 mm bowl depth 250 mm)" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6960.7 6960.7 4.0 False None None False None False 27842.8 0 3610206 131238 None V-2 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 898.28 898.28 12.0 False None None False None False 10779.36 0 3610207 131238 None V-2 P.NO 124 IT.NO 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3818.6 3818.6 13.0 False None None False None False 49641.8 0 3610208 131238 None V-2 P.NO 120 IT.NO 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 382.85 382.85 90.0 False None None False None False 34456.5 0 3610209 131238 None V-2 P.NO 120 IT.NO 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 20 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 469.58 469.58 70.0 False None None False None False 32870.6 0 3610210 131238 None V-2 p.NO 120 IT.NO 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 25 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 70.0 False None None False None False 41370.0 0 3610211 131238 None V-2 P.NO 120 IT.NO 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 690.12 690.12 30.0 False None None False None False 20703.6 0 3610212 131238 None V-2 P.NO 120 IT.NO 13.31.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 664.1 664.1 20.0 False None None False None False 13282.0 0 3610213 131238 None V-2 P.NO 120IT.NO 13.31.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 967.66 967.66 20.0 False None None False None False 19353.2 0 3610214 131238 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 268.86 268.86 50.0 False None None False None False 13443.0 0 3610215 131238 None V-2 P.NO 120 IT.NO 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 366.74 366.74 50.0 False None None False None False 18337.0 0 3610216 131238 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 215.0 False None None False None False 127065.0 0 3610217 131238 None V-2 P.NO 120 IT.NO 13.33.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 65mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 1734.6 1734.6 25.0 False None None False None False 43365.0 0 3610218 131238 None V-2 P.NO 120 IT.NO 13.33.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 50mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 893.32 893.32 40.0 False None None False None False 35732.8 0 3610219 131238 None V2 13.5.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :" 25 mm nominal bore ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 411.35 411.35 12.0 False None None False None False 4936.2 0 3610220 131238 None V2-13.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 740.92 740.92 7.0 False None None False None False 5186.44 0 3610221 131238 None V-2 13.4.3 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 869.78 869.78 9.0 False None None False None False 7828.02 0 3610222 131238 None v2-13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1059.35 1059.35 2.0 False None None False None False 2118.7 0 3610223 131238 None V-2,A-13, IT.NO 13.2.1 Brass bib-cock 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 354.35 354.35 19.0 False None None False None False 6732.65 0 3610224 131238 None V-2 IT.NO 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Ltr 11.15 11.15 3000.0 False None None False None False 33450.0 0 3610225 131238 None V2 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 182.13 182.13 125.0 False None None False None False 22766.25 0 3610226 131238 None Market Rate Providing and fixing 7.50cms to 15cms dia N.P. Grating 100mm dia. (Page.91/I.No.12.111) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 177.0 177.0 55.0 False None None False None False 9735.0 0 3610227 131238 None Market Rate Air Vent Cowel 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 413.0 413.0 12.0 False None None False None False 4956.0 0 3610228 131238 None Market Rate Air Vent Cowel 110mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 590.0 590.0 12.0 False None None False None False 7080.0 0 3610229 131238 None Market Rate Supplying and fixing Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards with a single 15mm C.P. 32mm dia CP waste coupling, 32mmdia heavy duty CP bottle trap with extension pipe, CP wall flanges, 2 Nos.15mm dia C.P. angle cocks, 2nos.C.P. flexible inlet connection pipes, CI brackets etc., complete including silicon sealant filling. (Jaguar make or Equalent ) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6844.0 6844.0 9.0 False None None False None False 61596.0 0 3610230 131238 None Market Rate Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2183.0 2183.0 9.0 False None None False None False 19647.0 0 3610231 131238 None Market Rate Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 95.0 False None None False None False 72865.0 0 3610232 131238 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. a) 65mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4130.0 4130.0 2.0 False None None False None False 8260.0 0 3610233 131238 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. b) 50mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3304.0 3304.0 4.0 False None None False None False 13216.0 0 3610234 131238 None V2 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 345.68 345.68 4.0 False None None False None False 1382.72 0 3610235 131238 None V2 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5335.13 5335.13 18.0 False None None False None False 96032.34 0 3610236 131238 None V2 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with chase cutter and embed ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3455.57 3455.57 10.0 False None None False None False 34555.7 0 3610237 131238 None V2 13.28 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 79.3 79.3 70.0 False None None False None False 5551.0 0 3610238 131238 None 14.36.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 111.51 111.51 23.0 False None None False None False 2564.73 0 3610239 131238 None 14.37.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 379.13 379.13 23.0 False None None False None False 8719.99 0 3610240 131238 None 13.8.1.1 Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 102.84 102.84 23.0 False None None False None False 2365.32 0 3610241 131238 None 14.22.A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1003.59 1003.59 23.0 False None None False None False 23082.57 0 3610242 131238 None 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 768.18 768.18 53.0 False None None False None False 40713.54 0 3610243 131238 None V2 14.63A Providing and fixing Single lever sink mixer with swivel spout top outlet wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4667.31 4667.31 4.0 False None None False None False 18669.24 0 3610244 131238 None 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5518.51 5518.51 4.0 False None None False None False 22074.04 0 3610245 131238 None ELE 7.3 Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3 density Rock wool insulation with 22SWG Aluminium cladding." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 39372.94 39372.94 3.0 False None None False None False 118118.82 0 3610246 131238 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-110mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 944.0 944.0 10.0 False None None False None False 9440.0 0 3610247 131238 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-75mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 2.0 False None None False None False 1534.0 0 3610248 131238 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-160MM dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1298.0 1298.0 1.0 False None None False None False 1298.0 0 3610249 131238 None V-1,P.NO 6,IT.NO 1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 224.0 False None None False None False 67164.16 0 3610250 131238 None V-1 P.NO 7 IT.NO 1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 536.49 536.49 224.0 False None None False None False 120173.76 0 3610251 131238 None V-5 P.NO 134 IT.NO 10.3 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete. for:" Pipes of SN8 Self Fit - 160mm dia. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 764.46 764.46 300.0 False None None False None False 229338.0 0 3610252 131238 None V-5 P.NO 134 IT.NO 10.2.4 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:( For external Rain water Work ). - do - 160 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 713.66 713.66 70.0 False None None False None False 49956.2 0 3610253 131238 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 45.0 False None None False None False 304087.95 0 3610254 131238 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CATCH BASIN) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 15.0 False None None False None False 101362.65 0 3610255 131238 None 13.39 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3197.86 3197.86 25.0 False None None False None False 79946.5 0 3610256 131238 None 16.18 Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting and using of sight rails and boning rods wherever necessary, shoring and strutting wherever required using Ordinary Port Land Cement, using 1:1.5:3 proportion RCC with 20 mm and down graded jelly, well graded sand and steel of approved quality, 200 mm thick top concrete slab, having wall thickness and raft thickness as in approved drawings and with an offset in raft alround the chamber as in approved drawing, benching concrete with 1:6 slope towards the central drain finished smooth, including fixing and grouting of pipes, including conveying to work spot supply and fixing SFRC Machinehole cover and frame (Heavy duty) conforming to IS:12592 with latest amendments, on a bed of CC 1:2:4 Providing and fixing of minimum 3 mm thick encapsulated plastic footsteps (as per IS 10910) on 12 mm dia. Grade Fe-500 steel bar (as per IS 1786) staggered at 300 mm apart as detailed in Technical specifications, including stone grit beding wherever required, watering, curing, engraving Machinehole number with flow direction on the inner cylindrical surface etc., complete including cost of reinforcement steel and fabrication charges and also cost and conveyance of all materials, labour with all lead and lifts. The Pre-cast RCC Machinehole are for various diamters and depths as stated below and as per detailed drawings, specifications and direction of the Engineer. For 1.2m dia Machinehole:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 97246.63 97246.63 1.0 False None None False None False 97246.63 0 3610257 131238 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 80.0 False None None False None False 47280.0 0 3610258 131238 None 13.23 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (50 mm nominal bore, 242mm long, weighing not less than 1240 g) T. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1665.22 1665.22 5.0 False None None False None False 8326.1 0 3610259 131238 None 13.40.1 V-5 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. (pump room collection sump pumps) (2 HP, Size 65x50 Head 13M, Discharge 462 LPM) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19340.79 19340.79 2.0 False None None False None False 38681.58 0 3610260 131238 None 13.32 V-5 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 8053.5 8053.5 2.0 False None None False None False 16107.0 0 3610261 131238 None PWD ELE SR V-6 IT.NO 2.2.1 WIRES & CABLES Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 333.29 333.29 25.0 False None None False None False 8332.25 0 3610262 131238 None PWD ELE SR V-10 IT.NO 2.2.2 Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Pack 469.58 469.58 36.0 False None None False None False 16904.88 0 3610263 131238 None PWD ELE SR V-11 IT.NO 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 687.65 687.65 63.0 False None None False None False 43321.95 0 3610264 131238 None PWD ELE SR V-12 IT.NO 2.2.4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 838.8 838.8 8.0 False None None False None False 6710.4 0 3610265 131238 None PWD ELE SR V-14 IT.NO 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 170.98 170.98 25.0 False None None False None False 4274.5 0 3610266 131238 None PWD ELE SR V-15 IT.NO 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 197.0 197.0 32.0 False None None False None False 6304.0 0 3610267 131238 None PWD ELE SR V-16 IT.NO 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 219.3 219.3 16.0 False None None False None False 3508.8 0 3610268 131238 None PWD ELE SR V-17 IT.NO 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 272.58 272.58 7.0 False None None False None False 1908.06 0 3610269 131238 None PWD ELE SR V-18 IT.NO 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 323.38 323.38 20.0 False None None False None False 6467.6 0 3610270 131238 None PWD ELE SR V-20 IT.NO 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 199.48 199.48 32.0 False None None False None False 6383.36 0 3610271 131238 None PWD ELE SR V-21 IT.NO 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 216.83 216.83 16.0 False None None False None False 3469.28 0 3610272 131238 None PWD ELE SR V-22 IT.NO 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 289.93 289.93 7.0 False None None False None False 2029.51 0 3610273 131238 None PWD ELE SR V-23 IT.NO 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 351.88 351.88 21.0 False None None False None False 7389.48 0 3610274 131238 None PWD ELE SR V-24 IT.NO 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 426.22 426.22 31.0 False None None False None False 13212.82 0 3610275 131238 None PWD ELE SR V-26 IT.NO 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 126.38 126.38 217.0 False None None False None False 27424.46 0 3610276 131238 None PWD ELE SR V-6 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 205.67 205.67 2.0 False None None False None False 411.34 0 3610277 131238 None PWD ELE SR V-6,IT.NO 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 211.87 211.87 81.0 False None None False None False 17161.47 0 3610278 131238 None PWD ELE SR V-6,IT.NO 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 442.32 442.32 24.0 False None None False None False 10615.68 0 3610279 131238 None PWD ELE SR V-6,IT.NO 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 223.02 223.02 10.0 False None None False None False 2230.2 0 3610280 131238 None PWD ELE SR V-6, IT.NO 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 403.91 403.91 15.0 False None None False None False 6058.65 0 3610281 131238 None PWD ELE SR V-6,IT.NO 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 292.4 292.4 25.0 False None None False None False 7310.0 0 3610282 131238 None PWD ELE SR V-6,IT.NO 1.13 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 144.96 144.96 24.0 False None None False None False 3479.04 0 3610283 131238 None PWD ELE SR V-6,IT.NO-1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 81.77 81.77 890.0 False None None False None False 72775.3 0 3610284 131238 None PWD ELE SR V-6,IT.NO 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 96.64 96.64 1030.0 False None None False None False 99539.2 0 3610285 131238 None PWD ELE SR V-6, IT.NO .2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 127.62 127.62 250.0 False None None False None False 31905.0 0 3610286 131238 None PWD ELE SR V-6,IT.NO1.3.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 84.25 84.25 445.0 False None None False None False 37491.25 0 3610287 131238 None PWD ELE SR V-6,IT.NO-1.3.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 97.88 97.88 515.0 False None None False None False 50408.2 0 3610288 131238 None PWD ELE SR V-6,IT.NO-1.3.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 122.66 122.66 150.0 False None None False None False 18399.0 0 3610289 131238 None PWD ELE SR V-6,IT.NO 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 32.21 32.21 470.0 False None None False None False 15138.7 0 3610290 131238 None PWD ELE SR V-6,IT.NO 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 52.04 52.04 1530.0 False None None False None False 79621.2 0 3610291 131238 None PWD ELE SR V-6,IT.NO 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 78.06 78.06 740.0 False None None False None False 57764.4 0 3610292 131238 None PWD ELE SR V-6,IT.NO 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 113.99 113.99 580.0 False None None False None False 66114.2 0 3610293 131238 None PWD ELE SR V-6,IT.NO 5.19.11 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5003.08 5003.08 2.0 False None None False None False 10006.16 0 3610294 131238 None PWD ELE SR V-6,IT.NO 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 6-32Amps SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 62.0 False None None False None False 31879.78 0 3610295 131238 None PWD ELE SR V-6 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 40Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3771.52 3771.52 2.0 False None None False None False 7543.04 0 3610296 131238 None PWD ELE SR V-6,IT.NO 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5299.2 5299.2 2.0 False None None False None False 10598.4 0 3610297 131238 None PWD ELE SR V-6,IT.NO 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 480.73 480.73 10.0 False None None False None False 4807.3 0 3610298 131238 None PWD ELE SR V-6,IT.NO 6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39.65 39.65 16.0 False None None False None False 634.4 0 3610299 131238 None V-6 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4348.89 4348.89 7.0 False None None False None False 30442.23 0 3610300 131238 None V-6 12.58.2 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 101.6 101.6 100.0 False None None False None False 10160.0 0 3610301 131238 None 12.58.6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600X600X3 GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1084.13 1084.13 6.0 False None None False None False 6504.78 0 3610302 131238 None 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10 12W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1096.52 1096.52 19.0 False None None False None False 20833.88 0 3610303 131238 None 11.5.3 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1640.44 1640.44 5.0 False None None False None False 8202.2 0 3610304 131238 None 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 854.91 854.91 51.0 False None None False None False 43600.41 0 3610305 131238 None 11.11.3 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 184.61 184.61 15.0 False None None False None False 2769.15 0 3610306 131238 None PWD ELE SR V-6,IT.NO 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1848.59 1848.59 13.0 False None None False None False 24031.67 0 3610307 131238 None PWD ELE SR V-6,IT.NO 6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3316.8 3316.8 24.0 False None None False None False 79603.2 0 3610308 131238 None PWD ELE SR V-6,IT.NO 13.11 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 390.29 390.29 24.0 False None None False None False 9366.96 0 3610309 131238 None PWD ELE SR V-6,IT.NO 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 151.16 151.16 83.0 False None None False None False 12546.28 0 3610310 131238 None PWD ELE SR V-6,IT.NO 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 875.97 875.97 13.0 False None None False None False 11387.61 0 3610311 131238 None PWD ELE SR V-6,IT.NO 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 200.72 200.72 3.0 False None None False None False 602.16 0 3610312 131238 None PWD ELE SR V-6,IT.NO 5.42.1 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 86000.0 False None None False None False 45580.0 0 3610313 131238 None PWD ELE SR V-6,IT.NO 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 5.0 False None None False None False 21279.85 0 3610314 131238 None PWD ELE SR V-6,IT.NO 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 10.0 False None None False None False 3779.0 0 3610315 131238 None PWD ELE SR V-6,IT.NO 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 10.0 False None None False None False 9366.8 0 3610316 131238 None PWD ELE SR V-6,IT.NO 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) 100Amps 25kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 10515.39 10515.39 1.0 False None None False None False 10515.39 0 3610317 131238 None PWD ELE SR V-6,iT.NO 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps DP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 10.0 False None None False None False 38260.3 0 3610318 131238 None PWD ELE SR V-6,IT.NO 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11541.29 11541.29 1.0 False None None False None False 11541.29 0 3610319 131238 None PWD ELE SR V-6,IT.NO 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3610320 131238 None PWD ELE SR V-6,IT.NO 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 696.32 696.32 3.0 False None None False None False 2088.96 0 3610321 131238 None PWD ELE SR V-6,IT.NO5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 15.0 False None None False None False 8920.8 0 3610322 131238 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way SP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2885.63 2885.63 2.0 False None None False None False 5771.26 0 3610323 131238 None 5.19.12 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6120.66 6120.66 1.0 False None None False None False 6120.66 0 3610324 131238 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 1.0 False None None False None False 3826.03 0 3610325 131238 None 5.20.8 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6377.13 6377.13 3.0 False None None False None False 19131.39 0 3610326 131238 None 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 109549.9 109549.9 0.1 False None None False None False 10954.99 0 3610327 131238 None 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 35 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 190882.82 190882.82 0.05 False None None False None False 9544.141 0 3610328 131238 None 32.13 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 70 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 393892.97 393892.97 0.1 False None None False None False 39389.297 0 3610329 131238 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.05 False None None False None False 1293.8875 0 3610330 131238 None 31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 38581.22 38581.22 0.2 False None None False None False 7716.244 0 3610331 131238 None 6.17.6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 15.41 15.41 20.0 False None None False None False 308.2 0 3610332 131238 None 16.17.10 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 70 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 148.68 148.68 16.0 False None None False None False 2378.88 0 3610333 131238 None 11.11.5 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 333.29 333.29 9.0 False None None False None False 2999.61 0 3610334 131238 None 11.6.3 Supplying of recess mounting non integral type .LED . W luminaire comprising of pressure decastextruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' 34 36watt ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5641.17 5641.17 8.0 False None None False None False 45129.36 0 3610335 131238 None 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4985.74 4985.74 2.0 False None None False None False 9971.48 0 3610336 131238 None 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1810.18 1810.18 3.0 False None None False None False 5430.54 0 3610337 131238 None 5.14.1 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 2738.19 2738.19 2.0 False None None False None False 5476.38 0 3610338 131238 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 169.74 169.74 24.0 False None None False None False 4073.76 0 3610339 131238 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 395.24 395.24 31.0 False None None False None False 12252.44 0 3610340 131238 None 2.2.5 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 1225.37 1225.37 4.0 False None None False None False 4901.48 0 3610341 131238 None 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 144.96 144.96 6.0 False None None False None False 869.76 0 3610342 131238 None 12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 78.06 78.06 21.0 False None None False None False 1639.26 0 3610343 131238 None 3.6.11 TV/Telephone socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 193.28 193.28 2.0 False None None False None False 386.56 0 3610344 131238 None 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 304.79 304.79 1.0 False None None False None False 304.79 0 3610345 131238 None 32.02 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 2 core 10 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 98168.45 98168.45 0.1 False None None False None False 9816.845 0 3610346 131238 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.1 False None None False None False 2587.775 0 3610347 131238 None pwd sr Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 15.41 15.41 15.0 False None None False None False 231.15 0 3610348 131238 None 11..11.7 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500-degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 527.81 527.81 3.0 False None None False None False 1583.43 0 3610349 131238 None 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 64.43 64.43 2.0 False None None False None False 128.86 0 3610350 131238 None 11.8.1 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 25watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3004.58 3004.58 1.0 False None None False None False 3004.58 0 3610351 131238 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers32Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 298.6 298.6 1.0 False None None False None False 298.6 0 3610352 131238 None 5.30 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1709.82 1709.82 1.0 False None None False None False 1709.82 0 3610353 131238 None 7.1.3 Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting.25Litres ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 12689.84 12689.84 1.0 False None None False None False 12689.84 0 3610354 131238 None PWD SR 2023-24 Volume 6 It No-9.3.3 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. 5 kVA ON LINE UPS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 84726.54 84726.54 1.0 False None None False None False 84726.54 0 3610355 131238 None PWD SR 2023-24 Volume 6 It No-9.5.9 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150AH capacity ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19693.91 19693.91 4.0 False None None False None False 78775.64 0 3610356 131238 None A.R Item Name : The Tenderer (agency) should arrange to obtain (get), detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration &proof checking by reputedGovernment/Semi Government/IISC /IIT/NIT/or as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, 3D view, MFP design and Drawings, Internal and External Electrical services including electrical infrastructure, etc. Interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project and 6 sets of as built drawings should be submitted to the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 300000.0 300000.0 1.0 False None None False None False 300000.0 0 3610357 131238 None LQR IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),30M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 23836.0 23836.0 4.0 False None None False None False 95344.0 0 3610358 131238 None LQR IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),60M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 25606.0 25606.0 2.0 False None None False None False 51212.0 0 3610359 131238 None LQR Supplying, installation, testing and commissioning of SITC of complete 8 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up to 16 channels),internal storage supports 8HDDs expandable up to 64TB (8TB each),operating temperatures(-10 degree C) and (55 degree C),UL,CE,FCC. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3610360 131238 None LQR Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17110.0 17110.0 2.0 False None None False None False 34220.0 0 3610361 131238 None LQR Supply and Installation of I/Os ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 147.5 147.5 12.0 False None None False None False 1770.0 0 3610362 131238 None LQR Supply and Installation of 2 Mtrs Patch Chord The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 265.5 265.5 12.0 False None None False None False 3186.0 0 3610363 131238 None LQR Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 336.3 336.3 6.0 False None None False None False 2017.8 0 3610364 131238 None LQR Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3610365 131238 None V-6 8.1 Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 600.0 False None None False None False 28248.0 0 3610366 131238 None 1.2.2 Supplying heavy gauge PVC Consealed conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 96.64 96.64 500.0 False None None False None False 48320.0 0 3610367 131238 None 8.12.3 Supplying & Fixing of Patch panel for LAN cabling .16 Port 10/100 patch panel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3778.95 3778.95 1.0 False None None False None False 3778.95 0 3610368 131238 None 8.4.1 v-6 Supplying & Fixing of switch mounting rack with power manager & Cable manager 4U with 450mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6061.19 6061.19 1.0 False None None False None False 6061.19 0 3610369 131238 None 1.01 Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 8767.16 8767.16 8.0 False None None False None False 70137.28 0 3610370 131238 None 2.02 Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1379.01 1379.01 8.0 False None None False None False 11032.08 0 3610371 131238 None 6.05 Supply of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 107.79 107.79 6.0 False None None False None False 646.74 0 3610372 131238 None 13.12 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 6.0 False None None False None False 356.82 0 3610373 131238 None 2.16 Supply of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 296.12 296.12 11.0 False None None False None False 3257.32 0 3610374 131238 None 2.16 Erection of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 115.23 115.23 11.0 False None None False None False 1267.53 0 3610375 131238 None 68.17 Supply and fixing of Caution/Danger Board ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 185.85 185.85 6.0 False None None False None False 1115.1 0 3610376 131238 None 4.02 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 110.27 110.27 8.0 False None None False None False 882.16 0 3610377 131238 None 5.09 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 52.04 52.04 8.0 False None None False None False 416.32 0 3610378 131238 None 24.05 Supply and fixing of 11 kV, 400 Amps Double Break GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 26341.14 26341.14 1.0 False None None False None False 26341.14 0 3610379 131238 None 24.07 Supply and fixing of H-Frame for mounting GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7521.97 7521.97 1.0 False None None False None False 7521.97 0 3610380 131238 None 25.01 Supply of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 7279.13 7279.13 1.0 False None None False None False 7279.13 0 3610381 131238 None 13.01 Erection of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 293.64 293.64 1.0 False None None False None False 293.64 0 3610382 131238 None 13.07 Supply, erection, testing and commissioning of 63 KVA 5Star rated Aluminium wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, , oil level indicator with + 5% to -10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 210958.34 210958.34 1.0 False None None False None False 210958.34 0 3610383 131238 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 4348.89 4348.89 8.0 False None None False None False 34791.12 0 3610384 131238 None 12.58.3 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work MT 158.59 158.59 100.0 False None None False None False 15859.0 0 3610385 131238 None 12.58.9 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2035.68 2035.68 100.0 False None None False None False 203568.0 0 3610386 131238 None 12.58.11 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 9194.62 9194.62 10.0 False None None False None False 91946.2 0 3610387 131238 None 45.07 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Outdoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 5039.01 5039.01 4.0 False None None False None False 20156.04 0 3610388 131238 None 45.04 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Indoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 3887.98 3887.98 2.0 False None None False None False 7775.96 0 3610389 131238 None 36.01 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 1102296.17 1102296.17 0.1 False None None False None False 110229.617 0 3610390 131238 None 38. Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1222.89 1222.89 150.0 False None None False None False 183433.5 0 3610391 131238 None 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 176000.0 False None None False None False 93280.0 0 3610392 131238 None 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 6.0 False None None False None False 25535.82 0 3610393 131238 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 12.0 False None None False None False 4534.8 0 3610394 131238 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 12.0 False None None False None False 11240.16 0 3610395 131238 None 5.15.15 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 250Amps 35kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 29172.26 29172.26 1.0 False None None False None False 29172.26 0 3610396 131238 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3610397 131238 None 10.1.3 Supplying, installing, testing and commissioning of 25KVA/20kw Diesel Generator set(CPCB-4) with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 Generator set specificationsEngine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have + 1.0 % Voltage regulation (max) in static conditions- IP: 23 protections with insulation class H. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lamps for ‘Load On’ and ‘Set Running’, Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections. Genset Controller: microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface, Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory, Provide Alternator Data. Voltage (1 ph or 3 ph line to line and line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph and total), Frequency, Provide Engine Data, Starting battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Meter calibration, Engine controls, Power Start operates on 12 VDC batteries,- Auto start mode accepts a ground signal from remote devices to automatically start the DG set. The remote start will also wake up the control system from sleep mode. Acoustic enclosure: The acoustic enclosure shall be made of 1.6 mm thick CRCA sheets in suitable approved shade and a structural/ sheet metal base frame painted in black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75dBA at 1 mtr sound levels specified by Ministry of Environment & Forest. The enclosure has the following features: Specially designed to meet stringent MOEF/ CPCB norms of 75dBA @ 1mtr at 75% load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 558914.14 558914.14 1.0 False None None False None False 558914.14 0 3610398 131238 None 10.2.2 Supply, Erection, testing and commissioning of AMF panel suitable for .KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .amps 4 pole contactor for alternator with thermal O/L relay,. Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and flat/Boost facility. 25 KVA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 72742.93 72742.93 1.0 False None None False None False 72742.93 0 3610399 131238 None A.R Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 3540.0 3540.0 5.0 False None None False None False 17700.0 0 3610400 131238 None A.R Supply and laying of 2Cx2.5SQ MM and 6CX2.5 SQ MM Sheilded Sensor and control Cables ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 236.0 236.0 50.0 False None None False None False 11800.0 0 3610401 131238 None 58.02 LT Metering Cubicle at Low Tension for 50KW to 150KW having specification and design as per the prototype approval (Excluding Meter cost and modem cost) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 98973.8 98973.8 1.0 False None None False None False 98973.8 0 3610402 131238 None 53.01 CT PT Operated ETV Meter 0.2s Accuracy class with ABT feature and DLMS protocal with ToD with RS232 Port UNIDIRACTIONAL ( Used for HT Installation, LT Metering Cubicle (50-150KW) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 24302.99 24302.99 1.0 False None None False None False 24302.99 0 3610403 131238 None 10.01 Supply and fixing of PG Clamps for Rabbit Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 173.46 173.46 15.0 False None None False None False 2601.9 0 3610404 131238 None v-6 2.02 Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 603.39 603.39 6.0 False None None False None False 3620.34 0 3610405 131238 None v-6 2.02 Erection of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 318.42 318.42 6.0 False None None False None False 1910.52 0 3610406 131238 None v-6 6.06 Supply and fixing of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 254.0 254.0 18.0 False None None False None False 4572.0 0 3610407 131238 None v-6 6.10 Supply and fixing of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 235.45 235.45 18.0 False None None False None False 4238.1 0 3610408 131238 None 13.12 v-6 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 18.0 False None None False None False 1070.46 0 3610409 131238 None v-6 6.08 Supply and fixing of 15 Strain Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 73.1 73.1 4.0 False None None False None False 292.4 0 3610410 131238 None 7.02 Supply of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 57283.93 57283.93 1.0 False None None False None False 57283.93 0 3610411 131238 None 6.02 V-6 Erection of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 5403.28 5403.28 1.0 False None None False None False 5403.28 0 1721828234000 0 None None Buildings TINTHANI IN SHORAPUR TALUK OF YADGIR DISTRICT 34741282.93 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3610412 131239 None CSR:V-3 PAGE NO 9 Itm 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work 100 Sqm 486.93 486.93 17.49 False None None False None False 8516.4057 0 3610413 131239 None V-1 page 8 itm 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 117.71 117.71 768.64 False None None False None False 90476.6144 0 3610414 131239 None V-1page 8 itm 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 126.38 126.38 1311.57 False None None False None False 165756.2166 0 3610415 131239 None V-1page 8 itm 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 449.76 449.76 230.53 False None None False None False 103683.1728 0 3610416 131239 None V-3page 3 A Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 167.27 167.27 225.13 False None None False None False 37657.4951 0 3610417 131239 None V-2page5 itm 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 146.2 146.2 774.16 False None None False None False 113182.192 0 3610418 131239 None V-1pg7 itm1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 329.57 329.57 807.35 False None None False None False 266078.3395 0 3610419 131239 None V-1page7vitm1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 587.29 587.29 728.89 False None None False None False 428069.8081 0 3610420 131239 None V-1page 15 itm2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7420.37 7420.37 161.37 False None None False None False 1197425.1069 0 3610421 131239 None V-1page15 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR FOOTING ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8478.33 8478.33 177.95 False None None False None False 1508718.8235 0 3610422 131239 None V-1page16 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatess FOR PEDESTAL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8635.33 8635.33 13.4 False None None False None False 115713.422 0 3610423 131239 None V-1page15itm 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR COLUMNS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 55.14 False None None False None False 794755.4274 0 3610424 131239 None V-3page135itm15.4 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 252.76 252.76 13.0 False None None False None False 3285.88 0 3610425 131239 None V-2page55 itm 8.16.a Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1533.88 1533.88 13.81 False None None False None False 21182.8828 0 3610426 131239 None V-1page18itm2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. - Buildings ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Tonne 110837.22 110837.22 50.82 False None None False None False 5632747.5204 0 3610427 131239 None 18-19SR ITM4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No KBS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 38.94 38.94 145.02 False None None False None False 5647.0788 0 3610428 131239 None DATA RATE Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 86.14 86.14 145.02 False None None False None False 12492.0228 0 3610429 131239 None V-2PAGE 9 ITM5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7915.97 7915.97 8.76 False None None False None False 69343.8972 0 3610430 131239 None V-2PAGE 14 ITM 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1623.09 1623.09 1313.93 False None None False None False 2132626.6437 0 3610431 131239 None V-2page 14 itm 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1367.86 1367.86 171.24 False None None False None False 234232.3464 0 3610432 131239 None V-2 page100 itm 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 122431.79 122431.79 1.2 False None None False None False 146918.148 0 3610433 131239 None V-2 page 105 itm 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1258.82 1258.82 32.0 False None None False None False 40282.24 0 3610434 131239 None 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 681.45 681.45 64.0 False None None False None False 43612.8 0 3610435 131239 None 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 464.63 464.63 32.0 False None None False None False 14868.16 0 3610436 131239 None 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 64.0 False None None False None False 11894.4 0 3610437 131239 None 22.15.9 PProviding and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 86.73 86.73 128.0 False None None False None False 11101.44 0 3610438 131239 None 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 123.9 123.9 32.0 False None None False None False 3964.8 0 3610439 131239 None 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1303.43 1303.43 32.0 False None None False None False 41709.76 0 3610440 131239 None V-2page69 itm 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 74.34 74.34 192.0 False None None False None False 14273.28 0 3610441 131239 None 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 168.45 False None None False None False 10853.2335 0 3610442 131239 None V-2page105 itm 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4115.96 4115.96 74.84 False None None False None False 308038.4464 0 3610443 131239 None V-2page109 itm 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 8343.43 8343.43 69.39 False None None False None False 578950.6077 0 3610444 131239 None V-2page109 itm 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 7085.84 7085.84 6.84 False None None False None False 48467.1456 0 3610445 131239 None V-2page 86itm11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 208.15 208.15 1600.83 False None None False None False 333212.7645 0 3610446 131239 None V-2page 111itm 12.93.1 Providing and fixing factory made single extruded WPC (WoodPolymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Size 62 x 100mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work m 869.78 869.78 64.35 False None None False None False 55970.343 0 3610447 131239 None V-2page84 itm 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kgs 168.5 168.5 1724.91 False None None False None False 290647.335 0 3610448 131239 None V-2page 41itm 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 386.57 386.57 1763.82 False None None False None False 681839.8974 0 3610449 131239 None V-2page 43 itm 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 261.43 261.43 1176.83 False None None False None False 307658.6669 0 3610450 131239 None V-2page50 itm 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 123.9 123.9 2919.03 False None None False None False 361667.817 0 3610451 131239 None V-2page42itm 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 432.41 432.41 975.48 False None None False None False 421807.3068 0 3610452 131239 None V-2page41 itm 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 438.61 438.61 163.05 False None None False None False 71515.3605 0 3610453 131239 None 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 2013.85 False None None False None False 94812.058 0 3610454 131239 None 10.5.2 Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 254.88 254.88 13.0 False None None False None False 3313.44 0 3610455 131239 None V-2page 54itm 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 628.05 False None None False None False 40465.2615 0 3610456 131239 None V-2page61itm 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1455.83 1455.83 580.89 False None None False None False 845677.0887 0 3610457 131239 None V-2page59 itm9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 991.2 991.2 71.5 False None None False None False 70870.8 0 3610458 131239 None V-2page63 itm 9.32 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3199.1 3199.1 34.54 False None None False None False 110496.914 0 3610459 131239 None V-2page 4 itm 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 365.51 365.51 316.07 False None None False None False 115526.7457 0 3610460 131239 None V-2page 60 itm 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1101.47 1101.47 59.14 False None None False None False 65140.9358 0 3610461 131239 None V-2page65 itmv9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1795.31 1795.31 259.57 False None None False None False 466008.6167 0 3610462 131239 None V-2 page85 itm11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 700.04 700.04 357.82 False None None False None False 250488.3128 0 3610463 131239 None V-2 page 48itm 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 157.35 157.35 2741.14 False None None False None False 431318.379 0 3610464 131239 None V-2page 46itm8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 193.28 193.28 759.66 False None None False None False 146827.0848 0 3610465 131239 None V-2page47 itm8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 61.95 61.95 96.21 False None None False None False 5960.2095 0 3610466 131239 None V-2page48 itm 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 142.49 142.49 76.23 False None None False None False 10862.0127 0 3610467 131239 None V-2page47itm 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 65.67 65.67 179.6 False None None False None False 11794.332 0 3610468 131239 None 8.82 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 838.8 838.8 179.6 False None None False None False 150648.48 0 3610469 131239 None V-2page64itm 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2044.35 2044.35 17.32 False None None False None False 35408.142 0 3610470 131239 None V-2page77 itm 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5548.24 5548.24 5.25 False None None False None False 29128.26 0 3610471 131239 None 15.12 Newly Constructed Roof/Podium with PU Waterproof coating Above 500 m2. Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids 85%, Tensile strength 2 Mpa as per ASTM D 412, Elongation at break 400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness 55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo textile over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1443.44 1443.44 726.5 False None None False None False 1048659.16 0 3610472 131239 None V-2PAGE22 ITM 7.17 Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers over the existing purlins, rafters and trusses including cost of materials, labour, complete as per specifications ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 411.35 411.35 24.74 False None None False None False 10176.799 0 3610473 131239 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR PLINTH BEAM ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 102.35 False None None False None False 1301658.642 0 3610474 131239 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC BEAMS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 51.01 False None None False None False 691979.2156 0 3610475 131239 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC SLAB ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 115.4 False None None False None False 1467624.888 0 3610476 131239 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC STARICASE ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 7.07 False None None False None False 89914.2804 0 3610477 131239 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR LINTEL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 12.12 False None None False None False 164414.5872 0 3610478 131239 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11911.13 11911.13 14.18 False None None False None False 168899.8234 0 3610479 131239 None 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4317.92 4317.92 20.48 False None None False None False 88431.0016 0 3610480 131239 None 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 141.25 141.25 36.0 False None None False None False 5085.0 0 3610481 131239 None 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1642.91 1642.91 56.5 False None None False None False 92824.415 0 3610482 131239 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 30.54 False None None False None False 201606.4506 0 3610483 131239 None 10.1.2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4877.94 4877.94 9.69 False None None False None False 47267.2386 0 3610484 131239 None 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 761.99 761.99 92.01 False None None False None False 70110.6999 0 3610485 131239 None 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 350.64 350.64 215.82 False None None False None False 75675.1248 0 3610486 131239 None 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 68.92 False None None False None False 24849.106 0 3610487 131239 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3533.63 3533.63 11.09 False None None False None False 39187.9567 0 3610488 131239 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 13.73 False None None False None False 90637.0847 0 3610489 131239 None 10.1.1 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4963.43 4963.43 3.81 False None None False None False 18910.6683 0 3610490 131239 None 1.4.1 V-1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 11.06 False None None False None False 3316.2304 0 3610491 131239 None 1.4.2 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 320.9 320.9 1.7 False None None False None False 545.53 0 3610492 131239 None 17.5 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1391.4 1391.4 7.0 False None None False None False 9739.8 0 3610493 131239 None 17.1 V-2 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1241.48 1241.48 0.28 False None None False None False 347.6144 0 3610494 131239 None 17.2 V-2 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1469.45 1469.45 0.14 False None None False None False 205.723 0 3610495 131239 None 17. V-2 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1476.89 1476.89 0.14 False None None False None False 206.7646 0 3610496 131239 None 17.4 V-2 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1659.02 1659.02 0.14 False None None False None False 232.2628 0 3610497 131239 None 17.14 V-2 Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 @ 6kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1449.63 1449.63 1.0 False None None False None False 1449.63 0 3610498 131239 None V3 305.3.4 Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 130.1 130.1 72.0 False None None False None False 9367.2 0 3610499 131239 None V-3 4.2 Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 2922.8 2922.8 36.0 False None None False None False 105220.8 0 3610500 131239 None V3 6.1 ISSUE RATE Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 MPa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 6095.88 6095.88 24.0 False None None False None False 146301.12 0 3610501 131239 None V-3 6.2 ISSUE RATE Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11107.64 11107.64 48.0 False None None False None False 533166.72 0 3610502 131239 None V-3 8.10 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 105.32 105.32 15.0 False None None False None False 1579.8 0 3610503 131239 None V-3 Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 87.97 87.97 448.0 False None None False None False 39410.56 0 3610504 131239 None V-314621A Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 250 x 100 mm Kerb Stone ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 296.12 296.12 150.0 False None None False None False 44418.0 0 3610505 131239 None 2.1.4 V-1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7702.86 7702.86 2.0 False None None False None False 15405.72 0 3610506 131239 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9156.76 9156.76 10.8 False None None False None False 98893.008 0 3610507 131239 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 459.67 459.67 320.0 False None None False None False 147094.4 0 3610508 131239 None 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 220.54 220.54 320.0 False None None False None False 70572.8 0 3610509 131239 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (FOR COMPOUND WALL) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8761.09 8761.09 9.36 False None None False None False 82003.8024 0 3610510 131239 None 8.20 V-3 Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 672.78 672.78 390.0 False None None False None False 262384.2 0 3610511 131239 None V1 1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Depth exceeding 1.5 m, but not exceeding 3 m FOR SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 526.58 526.58 22.51 False None None False None False 11853.3158 0 3610512 131239 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Raft for Water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8732.83 8732.83 4.32 False None None False None False 37725.8256 0 3610513 131239 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Outer wall water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9326.32 9326.32 5.89 False None None False None False 54932.0248 0 3610514 131239 None V2 15.14 UGT/OHT (inside) waterproofing with Antimicrobial CoatingProviding and Applying two component, waterbased food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 300 of US FDA, having mixing Ratio (Base: Hardener: Water) 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster, and that Item No. 4 is completed across the entire surface prior to applying the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2072.85 2072.85 36.6 False None None False None False 75866.31 0 3610515 131239 None V5 18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2430.92 2430.92 8.0 False None None False None False 19447.36 0 3610516 131239 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RC WALL FOR SEPTIC TANK ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 9.87 False None None False None False 142260.3567 0 3610517 131239 None 15.5 V-2 Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of 25 MPa (as per ASTM D 412), elongation of 500% (as per ASTM D 412), puncture resistance of 1000N (as per ASTM E 154), peel adhesion to concrete 1200N/m (as per ASTM D 903), hydrostatic head resistance 70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self adhesive polymer layer, etc, including surface preparation completely as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 749.6 749.6 63.57 False None None False None False 47652.072 0 3610518 131239 None 8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 110.27 110.27 20.1 False None None False None False 2216.427 0 3610519 131239 None V-5P140I12.4 Geophysical investigation of site for sinking Borewell for supplying drinking water to Habitation either through the Handpump, MWS or PWSS by vertical sounding by adopting veener sounding by adopting veener or schlumbergers's including reconassiance of survey of Geological formation,geophysical investigation of existing ground water in the vicinity quality, quantity and acceptability of the user including the location of site,recommended department of casing pipe required to seal the top and consolidated formation including an extra depth of 1.00Mtr in consolidated formation including an extra depth of drilling required to cover full depth of occupier proposed to trap probable yield and other information required including transportation of instrument and accessories to work site engaging technical personnel labour required etc complete as directed by Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6551.83 6551.83 1.0 False None None False None False 6551.83 0 3610520 131239 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 458.43 458.43 50.0 False None None False None False 22921.5 0 3610521 131239 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above 50 Mtrs and upto 100 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 574.9 574.9 50.0 False None None False None False 28745.0 0 3610522 131239 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above100 Mtrs. and upto 150 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 610.83 610.83 50.0 False None None False None False 30541.5 0 3610523 131239 None V-5P143I12.32 Supply Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2394.99 2394.99 20.0 False None None False None False 47899.8 0 3610524 131239 None V-5P155I13.28 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 681.45 681.45 150.0 False None None False None False 102217.5 0 3610525 131239 None V-5P143I12.33 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 1.0 False None None False None False 185.85 0 3610526 131239 None V-5P154I12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 203.2 203.2 1.0 False None None False None False 203.2 0 3610527 131239 None 18-19 SR13.81.3 Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 260.19 260.19 1.0 False None None False None False 260.19 0 3610528 131239 None V-5P154I13.11.5 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00" - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. 5.00 HP - 90 LPM @ 66 m = 10 STG Outlet Dia - 2.00" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39817.74 39817.74 1.0 False None None False None False 39817.74 0 3610529 131239 None V-5P155I13.23 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter Up to 6 HP - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11832.45 11832.45 1.0 False None None False None False 11832.45 0 3610530 131239 None V-5P155I13.29 Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets. complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1920.45 1920.45 1.0 False None None False None False 1920.45 0 3610531 131239 None V-5P155I13.31 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 49.56 49.56 100.0 False None None False None False 4956.0 0 3610532 131239 None V-5P156I13.32 Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job. as per specifications, with testing of as per instructions of engineer incharge of work - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 8053.5 8053.5 1.0 False None None False None False 8053.5 0 3610533 131239 None V-5P156I13.33 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 1672.65 1672.65 1.0 False None None False None False 1672.65 0 3610534 131239 None 2.6.2 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4 mm2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 208.15 208.15 165.0 False None None False None False 34344.75 0 3610535 131239 None V-5P20I5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour enameled metal paint etc., complete 16 SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 30000.0 False None None False None False 15900.0 0 3610536 131239 None V-5P21I5.44.4 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase /Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600mmx600mmx170mm. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17990.28 17990.28 1.0 False None None False None False 17990.28 0 3610537 131239 None 5.6.6 V-6 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20" x 2.5" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 404.08 404.08 1.0 False None None False None False 404.08 0 3610538 131239 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 1.0 False None None False None False 514.19 0 3610539 131239 None 13.18.1 Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15A to 63A TPST ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 344.44 344.44 1.0 False None None False None False 344.44 0 3610540 131239 None 5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 1.0 False None None False None False 594.72 0 3610541 131239 None V-2 13.50.5 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm dia pipes, From wash basin waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 376.66 376.66 50.0 False None None False None False 18833.0 0 3610542 131239 None V-2 13.50.6 Providing and fixing normal gauge polythene pipes of approved quality Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm dia pipes, From sink & urinal waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 478.25 478.25 20.0 False None None False None False 9565.0 0 3610543 131239 None V-2 13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 358.07 358.07 185.0 False None None False None False 66242.95 0 3610544 131239 None V-2 13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 477.02 477.02 120.0 False None None False None False 57242.4 0 3610545 131239 None V-2 IT.NO 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 244.08 244.08 35.0 False None None False None False 8542.8 0 3610546 131239 None V-2 IT.NO 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 50.0 False None None False None False 18027.5 0 3610547 131239 None V-2 P.NO 128 IT.NO 13.63 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 302.32 302.32 55.0 False None None False None False 16627.6 0 3610548 131239 None V-2 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1511.58 1511.58 21.0 False None None False None False 31743.18 0 3610549 131239 None V-2 P.NO 127 IT.NO 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6891.32 6891.32 4.0 False None None False None False 27565.28 0 3610550 131239 None V-2 P.NO 130 IT.NO 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 614.54 614.54 4.0 False None None False None False 2458.16 0 3610551 131239 None V-2 P.NO 123 IT.NO 14.38 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 179.66 179.66 4.0 False None None False None False 718.64 0 3610552 131239 None V-2 P.NO 178 IT.NO 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :: W.C. pan with ISI marked white solid plastic seat and lid" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7405.5 7405.5 9.0 False None None False None False 66649.5 0 3610553 131239 None V-2 P.NO 124 IT.NO14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6051.28 6051.28 10.0 False None None False None False 60512.8 0 3610554 131239 None V-2 P.NO 126 IT.NO 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6296.6 6296.6 2.0 False None None False None False 12593.2 0 3610555 131239 None V-2 P.NO 126 IT.NO 14.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (510x1040 mm bowl depth 250 mm)" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6960.7 6960.7 4.0 False None None False None False 27842.8 0 3610556 131239 None V-2 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 898.28 898.28 12.0 False None None False None False 10779.36 0 3610557 131239 None V-2 P.NO 124 IT.NO 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3818.6 3818.6 13.0 False None None False None False 49641.8 0 3610558 131239 None V-2 P.NO 120 IT.NO 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 382.85 382.85 90.0 False None None False None False 34456.5 0 3610559 131239 None V-2 P.NO 120 IT.NO 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 20 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 469.58 469.58 70.0 False None None False None False 32870.6 0 3610560 131239 None V-2 p.NO 120 IT.NO 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 25 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 70.0 False None None False None False 41370.0 0 3610561 131239 None V-2 P.NO 120 IT.NO 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 690.12 690.12 30.0 False None None False None False 20703.6 0 3610562 131239 None V-2 P.NO 120 IT.NO 13.31.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 664.1 664.1 20.0 False None None False None False 13282.0 0 3610563 131239 None V-2 P.NO 120IT.NO 13.31.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 967.66 967.66 20.0 False None None False None False 19353.2 0 3610564 131239 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 268.86 268.86 50.0 False None None False None False 13443.0 0 3610565 131239 None V-2 P.NO 120 IT.NO 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 366.74 366.74 50.0 False None None False None False 18337.0 0 3610566 131239 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 215.0 False None None False None False 127065.0 0 3610567 131239 None V-2 P.NO 120 IT.NO 13.33.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 65mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 1734.6 1734.6 25.0 False None None False None False 43365.0 0 3610568 131239 None V-2 P.NO 120 IT.NO 13.33.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 50mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 893.32 893.32 40.0 False None None False None False 35732.8 0 3610569 131239 None V2 13.5.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :" 25 mm nominal bore ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 411.35 411.35 12.0 False None None False None False 4936.2 0 3610570 131239 None V2-13.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 740.92 740.92 7.0 False None None False None False 5186.44 0 3610571 131239 None V-2 13.4.3 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 869.78 869.78 9.0 False None None False None False 7828.02 0 3610572 131239 None v2-13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1059.35 1059.35 2.0 False None None False None False 2118.7 0 3610573 131239 None V-2,A-13, IT.NO 13.2.1 Brass bib-cock 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 354.35 354.35 19.0 False None None False None False 6732.65 0 3610574 131239 None V-2 IT.NO 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Ltr 11.15 11.15 3000.0 False None None False None False 33450.0 0 3610575 131239 None V2 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 182.13 182.13 125.0 False None None False None False 22766.25 0 3610576 131239 None Market Rate Providing and fixing 7.50cms to 15cms dia N.P. Grating 100mm dia. (Page.91/I.No.12.111) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 177.0 177.0 55.0 False None None False None False 9735.0 0 3610577 131239 None Market Rate Air Vent Cowel 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 413.0 413.0 12.0 False None None False None False 4956.0 0 3610578 131239 None Market Rate Air Vent Cowel 110mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 590.0 590.0 12.0 False None None False None False 7080.0 0 3610579 131239 None Market Rate Supplying and fixing Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards with a single 15mm C.P. 32mm dia CP waste coupling, 32mmdia heavy duty CP bottle trap with extension pipe, CP wall flanges, 2 Nos.15mm dia C.P. angle cocks, 2nos.C.P. flexible inlet connection pipes, CI brackets etc., complete including silicon sealant filling. (Jaguar make or Equalent ) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6844.0 6844.0 9.0 False None None False None False 61596.0 0 3610580 131239 None Market Rate Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2183.0 2183.0 9.0 False None None False None False 19647.0 0 3610581 131239 None Market Rate Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 95.0 False None None False None False 72865.0 0 3610582 131239 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. a) 65mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4130.0 4130.0 2.0 False None None False None False 8260.0 0 3610583 131239 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. b) 50mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3304.0 3304.0 4.0 False None None False None False 13216.0 0 3610584 131239 None V2 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 345.68 345.68 4.0 False None None False None False 1382.72 0 3610585 131239 None V2 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5335.13 5335.13 18.0 False None None False None False 96032.34 0 3610586 131239 None V2 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with chase cutter and embed ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3455.57 3455.57 10.0 False None None False None False 34555.7 0 3610587 131239 None V2 13.28 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 79.3 79.3 70.0 False None None False None False 5551.0 0 3610588 131239 None 14.36.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 111.51 111.51 23.0 False None None False None False 2564.73 0 3610589 131239 None 14.37.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 379.13 379.13 23.0 False None None False None False 8719.99 0 3610590 131239 None 13.8.1.1 Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 102.84 102.84 23.0 False None None False None False 2365.32 0 3610591 131239 None 14.22.A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1003.59 1003.59 23.0 False None None False None False 23082.57 0 3610592 131239 None 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 768.18 768.18 53.0 False None None False None False 40713.54 0 3610593 131239 None V2 14.63A Providing and fixing Single lever sink mixer with swivel spout top outlet wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4667.31 4667.31 4.0 False None None False None False 18669.24 0 3610594 131239 None 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5518.51 5518.51 4.0 False None None False None False 22074.04 0 3610595 131239 None ELE 7.3 Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3 density Rock wool insulation with 22SWG Aluminium cladding." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 39372.94 39372.94 3.0 False None None False None False 118118.82 0 3610596 131239 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-110mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 944.0 944.0 10.0 False None None False None False 9440.0 0 3610597 131239 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-75mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 2.0 False None None False None False 1534.0 0 3610598 131239 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-160MM dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1298.0 1298.0 1.0 False None None False None False 1298.0 0 3610599 131239 None V-1,P.NO 6,IT.NO 1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 224.0 False None None False None False 67164.16 0 3610600 131239 None V-1 P.NO 7 IT.NO 1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 536.49 536.49 224.0 False None None False None False 120173.76 0 3610601 131239 None V-5 P.NO 134 IT.NO 10.3 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete. for:" Pipes of SN8 Self Fit - 160mm dia. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 764.46 764.46 300.0 False None None False None False 229338.0 0 3610602 131239 None V-5 P.NO 134 IT.NO 10.2.4 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:( For external Rain water Work ). - do - 160 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 713.66 713.66 70.0 False None None False None False 49956.2 0 3610603 131239 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 45.0 False None None False None False 304087.95 0 3610604 131239 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CATCH BASIN) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 15.0 False None None False None False 101362.65 0 3610605 131239 None 13.39 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3197.86 3197.86 25.0 False None None False None False 79946.5 0 3610606 131239 None 16.18 Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting and using of sight rails and boning rods wherever necessary, shoring and strutting wherever required using Ordinary Port Land Cement, using 1:1.5:3 proportion RCC with 20 mm and down graded jelly, well graded sand and steel of approved quality, 200 mm thick top concrete slab, having wall thickness and raft thickness as in approved drawings and with an offset in raft alround the chamber as in approved drawing, benching concrete with 1:6 slope towards the central drain finished smooth, including fixing and grouting of pipes, including conveying to work spot supply and fixing SFRC Machinehole cover and frame (Heavy duty) conforming to IS:12592 with latest amendments, on a bed of CC 1:2:4 Providing and fixing of minimum 3 mm thick encapsulated plastic footsteps (as per IS 10910) on 12 mm dia. Grade Fe-500 steel bar (as per IS 1786) staggered at 300 mm apart as detailed in Technical specifications, including stone grit beding wherever required, watering, curing, engraving Machinehole number with flow direction on the inner cylindrical surface etc., complete including cost of reinforcement steel and fabrication charges and also cost and conveyance of all materials, labour with all lead and lifts. The Pre-cast RCC Machinehole are for various diamters and depths as stated below and as per detailed drawings, specifications and direction of the Engineer. For 1.2m dia Machinehole:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 97246.63 97246.63 1.0 False None None False None False 97246.63 0 3610607 131239 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 80.0 False None None False None False 47280.0 0 3610608 131239 None 13.23 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (50 mm nominal bore, 242mm long, weighing not less than 1240 g) T. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1665.22 1665.22 5.0 False None None False None False 8326.1 0 3610609 131239 None 13.40.1 V-5 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. (pump room collection sump pumps) (2 HP, Size 65x50 Head 13M, Discharge 462 LPM) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19340.79 19340.79 2.0 False None None False None False 38681.58 0 3610610 131239 None 13.32 V-5 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 8053.5 8053.5 2.0 False None None False None False 16107.0 0 3610611 131239 None PWD ELE SR V-6 IT.NO 2.2.1 WIRES & CABLES Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 333.29 333.29 25.0 False None None False None False 8332.25 0 3610612 131239 None PWD ELE SR V-10 IT.NO 2.2.2 Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Pack 469.58 469.58 36.0 False None None False None False 16904.88 0 3610613 131239 None PWD ELE SR V-11 IT.NO 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 687.65 687.65 63.0 False None None False None False 43321.95 0 3610614 131239 None PWD ELE SR V-12 IT.NO 2.2.4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 838.8 838.8 8.0 False None None False None False 6710.4 0 3610615 131239 None PWD ELE SR V-14 IT.NO 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 170.98 170.98 25.0 False None None False None False 4274.5 0 3610616 131239 None PWD ELE SR V-15 IT.NO 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 197.0 197.0 32.0 False None None False None False 6304.0 0 3610617 131239 None PWD ELE SR V-16 IT.NO 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 219.3 219.3 16.0 False None None False None False 3508.8 0 3610618 131239 None PWD ELE SR V-17 IT.NO 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 272.58 272.58 7.0 False None None False None False 1908.06 0 3610619 131239 None PWD ELE SR V-18 IT.NO 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 323.38 323.38 20.0 False None None False None False 6467.6 0 3610620 131239 None PWD ELE SR V-20 IT.NO 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 199.48 199.48 32.0 False None None False None False 6383.36 0 3610621 131239 None PWD ELE SR V-21 IT.NO 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 216.83 216.83 16.0 False None None False None False 3469.28 0 3610622 131239 None PWD ELE SR V-22 IT.NO 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 289.93 289.93 7.0 False None None False None False 2029.51 0 3610623 131239 None PWD ELE SR V-23 IT.NO 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 351.88 351.88 21.0 False None None False None False 7389.48 0 3610624 131239 None PWD ELE SR V-24 IT.NO 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 426.22 426.22 31.0 False None None False None False 13212.82 0 3610625 131239 None PWD ELE SR V-26 IT.NO 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 126.38 126.38 217.0 False None None False None False 27424.46 0 3610626 131239 None PWD ELE SR V-6 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 205.67 205.67 2.0 False None None False None False 411.34 0 3610627 131239 None PWD ELE SR V-6,IT.NO 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 211.87 211.87 81.0 False None None False None False 17161.47 0 3610628 131239 None PWD ELE SR V-6,IT.NO 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 442.32 442.32 24.0 False None None False None False 10615.68 0 3610629 131239 None PWD ELE SR V-6,IT.NO 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 223.02 223.02 10.0 False None None False None False 2230.2 0 3610630 131239 None PWD ELE SR V-6, IT.NO 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 403.91 403.91 15.0 False None None False None False 6058.65 0 3610631 131239 None PWD ELE SR V-6,IT.NO 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 292.4 292.4 25.0 False None None False None False 7310.0 0 3610632 131239 None PWD ELE SR V-6,IT.NO 1.13 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 144.96 144.96 24.0 False None None False None False 3479.04 0 3610633 131239 None PWD ELE SR V-6,IT.NO-1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 81.77 81.77 890.0 False None None False None False 72775.3 0 3610634 131239 None PWD ELE SR V-6,IT.NO 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 96.64 96.64 1030.0 False None None False None False 99539.2 0 3610635 131239 None PWD ELE SR V-6, IT.NO .2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 127.62 127.62 250.0 False None None False None False 31905.0 0 3610636 131239 None PWD ELE SR V-6,IT.NO1.3.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 84.25 84.25 445.0 False None None False None False 37491.25 0 3610637 131239 None PWD ELE SR V-6,IT.NO-1.3.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 97.88 97.88 515.0 False None None False None False 50408.2 0 3610638 131239 None PWD ELE SR V-6,IT.NO-1.3.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 122.66 122.66 150.0 False None None False None False 18399.0 0 3610639 131239 None PWD ELE SR V-6,IT.NO 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 32.21 32.21 470.0 False None None False None False 15138.7 0 3610640 131239 None PWD ELE SR V-6,IT.NO 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 52.04 52.04 1530.0 False None None False None False 79621.2 0 3610641 131239 None PWD ELE SR V-6,IT.NO 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 78.06 78.06 740.0 False None None False None False 57764.4 0 3610642 131239 None PWD ELE SR V-6,IT.NO 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 113.99 113.99 580.0 False None None False None False 66114.2 0 3610643 131239 None PWD ELE SR V-6,IT.NO 5.19.11 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5003.08 5003.08 2.0 False None None False None False 10006.16 0 3610644 131239 None PWD ELE SR V-6,IT.NO 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 6-32Amps SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 62.0 False None None False None False 31879.78 0 3610645 131239 None PWD ELE SR V-6 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 40Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3771.52 3771.52 2.0 False None None False None False 7543.04 0 3610646 131239 None PWD ELE SR V-6,IT.NO 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5299.2 5299.2 2.0 False None None False None False 10598.4 0 3610647 131239 None PWD ELE SR V-6,IT.NO 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 480.73 480.73 10.0 False None None False None False 4807.3 0 3610648 131239 None PWD ELE SR V-6,IT.NO 6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39.65 39.65 16.0 False None None False None False 634.4 0 3610649 131239 None V-6 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4348.89 4348.89 7.0 False None None False None False 30442.23 0 3610650 131239 None V-6 12.58.2 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 101.6 101.6 100.0 False None None False None False 10160.0 0 3610651 131239 None 12.58.6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600X600X3 GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1084.13 1084.13 6.0 False None None False None False 6504.78 0 3610652 131239 None 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10 12W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1096.52 1096.52 19.0 False None None False None False 20833.88 0 3610653 131239 None 11.5.3 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1640.44 1640.44 5.0 False None None False None False 8202.2 0 3610654 131239 None 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 854.91 854.91 51.0 False None None False None False 43600.41 0 3610655 131239 None 11.11.3 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 184.61 184.61 15.0 False None None False None False 2769.15 0 3610656 131239 None PWD ELE SR V-6,IT.NO 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1848.59 1848.59 13.0 False None None False None False 24031.67 0 3610657 131239 None PWD ELE SR V-6,IT.NO 6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3316.8 3316.8 24.0 False None None False None False 79603.2 0 3610658 131239 None PWD ELE SR V-6,IT.NO 13.11 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 390.29 390.29 24.0 False None None False None False 9366.96 0 3610659 131239 None PWD ELE SR V-6,IT.NO 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 151.16 151.16 83.0 False None None False None False 12546.28 0 3610660 131239 None PWD ELE SR V-6,IT.NO 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 875.97 875.97 13.0 False None None False None False 11387.61 0 3610661 131239 None PWD ELE SR V-6,IT.NO 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 200.72 200.72 3.0 False None None False None False 602.16 0 3610662 131239 None PWD ELE SR V-6,IT.NO 5.42.1 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 86000.0 False None None False None False 45580.0 0 3610663 131239 None PWD ELE SR V-6,IT.NO 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 5.0 False None None False None False 21279.85 0 3610664 131239 None PWD ELE SR V-6,IT.NO 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 10.0 False None None False None False 3779.0 0 3610665 131239 None PWD ELE SR V-6,IT.NO 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 10.0 False None None False None False 9366.8 0 3610666 131239 None PWD ELE SR V-6,IT.NO 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) 100Amps 25kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 10515.39 10515.39 1.0 False None None False None False 10515.39 0 3610667 131239 None PWD ELE SR V-6,iT.NO 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps DP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 10.0 False None None False None False 38260.3 0 3610668 131239 None PWD ELE SR V-6,IT.NO 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11541.29 11541.29 1.0 False None None False None False 11541.29 0 3610669 131239 None PWD ELE SR V-6,IT.NO 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3610670 131239 None PWD ELE SR V-6,IT.NO 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 696.32 696.32 3.0 False None None False None False 2088.96 0 3610671 131239 None PWD ELE SR V-6,IT.NO5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 15.0 False None None False None False 8920.8 0 3610672 131239 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way SP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2885.63 2885.63 2.0 False None None False None False 5771.26 0 3610673 131239 None 5.19.12 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6120.66 6120.66 1.0 False None None False None False 6120.66 0 3610674 131239 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 1.0 False None None False None False 3826.03 0 3610675 131239 None 5.20.8 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6377.13 6377.13 3.0 False None None False None False 19131.39 0 3610676 131239 None 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 109549.9 109549.9 0.1 False None None False None False 10954.99 0 3610677 131239 None 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 35 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 190882.82 190882.82 0.05 False None None False None False 9544.141 0 3610678 131239 None 32.13 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 70 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 393892.97 393892.97 0.1 False None None False None False 39389.297 0 3610679 131239 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.05 False None None False None False 1293.8875 0 3610680 131239 None 31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 38581.22 38581.22 0.2 False None None False None False 7716.244 0 3610681 131239 None 6.17.6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 15.41 15.41 20.0 False None None False None False 308.2 0 3610682 131239 None 16.17.10 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 70 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 148.68 148.68 16.0 False None None False None False 2378.88 0 3610683 131239 None 11.11.5 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 333.29 333.29 9.0 False None None False None False 2999.61 0 3610684 131239 None 11.6.3 Supplying of recess mounting non integral type .LED . W luminaire comprising of pressure decastextruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' 34 36watt ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5641.17 5641.17 8.0 False None None False None False 45129.36 0 3610685 131239 None 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4985.74 4985.74 2.0 False None None False None False 9971.48 0 3610686 131239 None 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1810.18 1810.18 3.0 False None None False None False 5430.54 0 3610687 131239 None 5.14.1 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 2738.19 2738.19 2.0 False None None False None False 5476.38 0 3610688 131239 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 169.74 169.74 24.0 False None None False None False 4073.76 0 3610689 131239 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 395.24 395.24 31.0 False None None False None False 12252.44 0 3610690 131239 None 2.2.5 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 1225.37 1225.37 4.0 False None None False None False 4901.48 0 3610691 131239 None 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 144.96 144.96 6.0 False None None False None False 869.76 0 3610692 131239 None 12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 78.06 78.06 21.0 False None None False None False 1639.26 0 3610693 131239 None 3.6.11 TV/Telephone socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 193.28 193.28 2.0 False None None False None False 386.56 0 3610694 131239 None 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 304.79 304.79 1.0 False None None False None False 304.79 0 3610695 131239 None 32.02 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 2 core 10 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 98168.45 98168.45 0.1 False None None False None False 9816.845 0 3610696 131239 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.1 False None None False None False 2587.775 0 3610697 131239 None pwd sr Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 15.41 15.41 15.0 False None None False None False 231.15 0 3610698 131239 None 11..11.7 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500-degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 527.81 527.81 3.0 False None None False None False 1583.43 0 3610699 131239 None 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 64.43 64.43 2.0 False None None False None False 128.86 0 3610700 131239 None 11.8.1 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 25watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3004.58 3004.58 1.0 False None None False None False 3004.58 0 3610701 131239 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers32Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 298.6 298.6 1.0 False None None False None False 298.6 0 3610702 131239 None 5.30 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1709.82 1709.82 1.0 False None None False None False 1709.82 0 3610703 131239 None 7.1.3 Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting.25Litres ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 12689.84 12689.84 1.0 False None None False None False 12689.84 0 3610704 131239 None PWD SR 2023-24 Volume 6 It No-9.3.3 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. 5 kVA ON LINE UPS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 84726.54 84726.54 1.0 False None None False None False 84726.54 0 3610705 131239 None PWD SR 2023-24 Volume 6 It No-9.5.9 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150AH capacity ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19693.91 19693.91 4.0 False None None False None False 78775.64 0 3610706 131239 None A.R Item Name : The Tenderer (agency) should arrange to obtain (get), detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration &proof checking by reputedGovernment/Semi Government/IISC /IIT/NIT/or as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, 3D view, MFP design and Drawings, Internal and External Electrical services including electrical infrastructure, etc. Interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project and 6 sets of as built drawings should be submitted to the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 300000.0 300000.0 1.0 False None None False None False 300000.0 0 3610707 131239 None LQR IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),30M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 23836.0 23836.0 4.0 False None None False None False 95344.0 0 3610708 131239 None LQR IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),60M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 25606.0 25606.0 2.0 False None None False None False 51212.0 0 3610709 131239 None LQR Supplying, installation, testing and commissioning of SITC of complete 8 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up to 16 channels),internal storage supports 8HDDs expandable up to 64TB (8TB each),operating temperatures(-10 degree C) and (55 degree C),UL,CE,FCC. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3610710 131239 None LQR Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17110.0 17110.0 2.0 False None None False None False 34220.0 0 3610711 131239 None LQR Supply and Installation of I/Os ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 147.5 147.5 12.0 False None None False None False 1770.0 0 3610712 131239 None LQR Supply and Installation of 2 Mtrs Patch Chord The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 265.5 265.5 12.0 False None None False None False 3186.0 0 3610713 131239 None LQR Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 336.3 336.3 6.0 False None None False None False 2017.8 0 3610714 131239 None LQR Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3610715 131239 None V-6 8.1 Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 600.0 False None None False None False 28248.0 0 3610716 131239 None 1.2.2 Supplying heavy gauge PVC Consealed conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 96.64 96.64 500.0 False None None False None False 48320.0 0 3610717 131239 None 8.12.3 Supplying & Fixing of Patch panel for LAN cabling .16 Port 10/100 patch panel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3778.95 3778.95 1.0 False None None False None False 3778.95 0 3610718 131239 None 8.4.1 v-6 Supplying & Fixing of switch mounting rack with power manager & Cable manager 4U with 450mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6061.19 6061.19 1.0 False None None False None False 6061.19 0 3610719 131239 None 1.01 Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 8767.16 8767.16 8.0 False None None False None False 70137.28 0 3610720 131239 None 2.02 Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1379.01 1379.01 8.0 False None None False None False 11032.08 0 3610721 131239 None 6.05 Supply of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 107.79 107.79 6.0 False None None False None False 646.74 0 3610722 131239 None 13.12 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 6.0 False None None False None False 356.82 0 3610723 131239 None 2.16 Supply of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 296.12 296.12 11.0 False None None False None False 3257.32 0 3610724 131239 None 2.16 Erection of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 115.23 115.23 11.0 False None None False None False 1267.53 0 3610725 131239 None 68.17 Supply and fixing of Caution/Danger Board ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 185.85 185.85 6.0 False None None False None False 1115.1 0 3610726 131239 None 4.02 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 110.27 110.27 8.0 False None None False None False 882.16 0 3610727 131239 None 5.09 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 52.04 52.04 8.0 False None None False None False 416.32 0 3610728 131239 None 24.05 Supply and fixing of 11 kV, 400 Amps Double Break GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 26341.14 26341.14 1.0 False None None False None False 26341.14 0 3610729 131239 None 24.07 Supply and fixing of H-Frame for mounting GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7521.97 7521.97 1.0 False None None False None False 7521.97 0 3610730 131239 None 25.01 Supply of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 7279.13 7279.13 1.0 False None None False None False 7279.13 0 3610731 131239 None 13.01 Erection of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 293.64 293.64 1.0 False None None False None False 293.64 0 3610732 131239 None 13.07 Supply, erection, testing and commissioning of 63 KVA 5Star rated Aluminium wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, , oil level indicator with + 5% to -10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 210958.34 210958.34 1.0 False None None False None False 210958.34 0 3610733 131239 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 4348.89 4348.89 8.0 False None None False None False 34791.12 0 3610734 131239 None 12.58.3 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work MT 158.59 158.59 100.0 False None None False None False 15859.0 0 3610735 131239 None 12.58.9 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2035.68 2035.68 100.0 False None None False None False 203568.0 0 3610736 131239 None 12.58.11 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 9194.62 9194.62 10.0 False None None False None False 91946.2 0 3610737 131239 None 45.07 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Outdoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 5039.01 5039.01 4.0 False None None False None False 20156.04 0 3610738 131239 None 45.04 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Indoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 3887.98 3887.98 2.0 False None None False None False 7775.96 0 3610739 131239 None 36.01 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 1102296.17 1102296.17 0.1 False None None False None False 110229.617 0 3610740 131239 None 38. Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1222.89 1222.89 150.0 False None None False None False 183433.5 0 3610741 131239 None 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 176000.0 False None None False None False 93280.0 0 3610742 131239 None 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 6.0 False None None False None False 25535.82 0 3610743 131239 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 12.0 False None None False None False 4534.8 0 3610744 131239 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 12.0 False None None False None False 11240.16 0 3610745 131239 None 5.15.15 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 250Amps 35kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 29172.26 29172.26 1.0 False None None False None False 29172.26 0 3610746 131239 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3610747 131239 None 10.1.3 Supplying, installing, testing and commissioning of 25KVA/20kw Diesel Generator set(CPCB-4) with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 Generator set specificationsEngine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have + 1.0 % Voltage regulation (max) in static conditions- IP: 23 protections with insulation class H. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lamps for ‘Load On’ and ‘Set Running’, Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections. Genset Controller: microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface, Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory, Provide Alternator Data. Voltage (1 ph or 3 ph line to line and line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph and total), Frequency, Provide Engine Data, Starting battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Meter calibration, Engine controls, Power Start operates on 12 VDC batteries,- Auto start mode accepts a ground signal from remote devices to automatically start the DG set. The remote start will also wake up the control system from sleep mode. Acoustic enclosure: The acoustic enclosure shall be made of 1.6 mm thick CRCA sheets in suitable approved shade and a structural/ sheet metal base frame painted in black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75dBA at 1 mtr sound levels specified by Ministry of Environment & Forest. The enclosure has the following features: Specially designed to meet stringent MOEF/ CPCB norms of 75dBA @ 1mtr at 75% load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 558914.14 558914.14 1.0 False None None False None False 558914.14 0 3610748 131239 None 10.2.2 Supply, Erection, testing and commissioning of AMF panel suitable for .KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .amps 4 pole contactor for alternator with thermal O/L relay,. Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and flat/Boost facility. 25 KVA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 72742.93 72742.93 1.0 False None None False None False 72742.93 0 3610749 131239 None A.R Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 3540.0 3540.0 5.0 False None None False None False 17700.0 0 3610750 131239 None A.R Supply and laying of 2Cx2.5SQ MM and 6CX2.5 SQ MM Sheilded Sensor and control Cables ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 236.0 236.0 50.0 False None None False None False 11800.0 0 3610751 131239 None 58.02 LT Metering Cubicle at Low Tension for 50KW to 150KW having specification and design as per the prototype approval (Excluding Meter cost and modem cost) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 98973.8 98973.8 1.0 False None None False None False 98973.8 0 3610752 131239 None 53.01 CT PT Operated ETV Meter 0.2s Accuracy class with ABT feature and DLMS protocal with ToD with RS232 Port UNIDIRACTIONAL ( Used for HT Installation, LT Metering Cubicle (50-150KW) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 24302.99 24302.99 1.0 False None None False None False 24302.99 0 3610753 131239 None 10.01 Supply and fixing of PG Clamps for Rabbit Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 173.46 173.46 15.0 False None None False None False 2601.9 0 3610754 131239 None v-6 2.02 Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 603.39 603.39 6.0 False None None False None False 3620.34 0 3610755 131239 None v-6 2.02 Erection of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 318.42 318.42 6.0 False None None False None False 1910.52 0 3610756 131239 None v-6 6.06 Supply and fixing of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 254.0 254.0 18.0 False None None False None False 4572.0 0 3610757 131239 None v-6 6.10 Supply and fixing of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 235.45 235.45 18.0 False None None False None False 4238.1 0 3610758 131239 None 13.12 v-6 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 18.0 False None None False None False 1070.46 0 3610759 131239 None v-6 6.08 Supply and fixing of 15 Strain Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 73.1 73.1 4.0 False None None False None False 292.4 0 3610760 131239 None 7.02 Supply of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 57283.93 57283.93 1.0 False None None False None False 57283.93 0 3610761 131239 None 6.02 V-6 Erection of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 5403.28 5403.28 1.0 False None None False None False 5403.28 0 1721828234000 0 None None Buildings MUDNOOR IN SHORAPUR TALUK OF YADGIR DISTRICT (CIVIL WORKS) 27736381.66 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3610762 131240 None CSR:V-3 PAGE NO 9 Itm 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work 100 Sqm 486.93 486.93 17.09 False None None False None False 8321.6337 0 3610763 131240 None V-1 page 8 itm 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 117.71 117.71 540.95 False None None False None False 63675.2245 0 3610764 131240 None V-1page 8 itm 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 126.38 126.38 1430.43 False None None False None False 180777.7434 0 3610765 131240 None V-1page 8 itm 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 449.76 449.76 254.05 False None None False None False 114261.528 0 3610766 131240 None V-3page 3 A Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 167.27 167.27 218.94 False None None False None False 36622.0938 0 3610767 131240 None V-2page5 itm 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 146.2 146.2 774.16 False None None False None False 113182.192 0 3610768 131240 None V-1pg7 itm1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 329.57 329.57 901.41 False None None False None False 297077.6937 0 3610769 131240 None V-1page7vitm1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 587.29 587.29 747.04 False None None False None False 438729.1216 0 3610770 131240 None V-1page 15 itm2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7420.37 7420.37 155.33 False None None False None False 1152606.0721 0 3610771 131240 None V-1page15 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR FOOTING ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8478.33 8478.33 177.95 False None None False None False 1508718.8235 0 3610772 131240 None V-1page16 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatess FOR PEDESTAL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8635.33 8635.33 13.4 False None None False None False 115713.422 0 3610773 131240 None V-1page15itm 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR COLUMNS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 57.58 False None None False None False 829924.1478 0 3610774 131240 None V-3page135itm15.4 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 252.76 252.76 13.0 False None None False None False 3285.88 0 3610775 131240 None V-2page55 itm 8.16.a Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1533.88 1533.88 13.81 False None None False None False 21182.8828 0 3610776 131240 None V-1page18itm2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. - Buildings ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Tonne 110837.22 110837.22 50.59 False None None False None False 5607254.9598 0 3610777 131240 None 18-19SR ITM4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No KBS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 38.94 38.94 145.02 False None None False None False 5647.0788 0 3610778 131240 None DATA RATE Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 86.14 86.14 145.02 False None None False None False 12492.0228 0 3610779 131240 None V-2PAGE 9 ITM5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7915.97 7915.97 8.76 False None None False None False 69343.8972 0 3610780 131240 None V-2PAGE 14 ITM 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1623.09 1623.09 1253.93 False None None False None False 2035241.2437 0 3610781 131240 None V-2page 14 itm 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1367.86 1367.86 171.24 False None None False None False 234232.3464 0 3610782 131240 None V-2 page100 itm 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 122431.79 122431.79 1.2 False None None False None False 146918.148 0 3610783 131240 None V-2 page 105 itm 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1258.82 1258.82 32.0 False None None False None False 40282.24 0 3610784 131240 None 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 681.45 681.45 64.0 False None None False None False 43612.8 0 3610785 131240 None 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 464.63 464.63 32.0 False None None False None False 14868.16 0 3610786 131240 None 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 64.0 False None None False None False 11894.4 0 3610787 131240 None 22.15.9 PProviding and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 86.73 86.73 128.0 False None None False None False 11101.44 0 3610788 131240 None 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 123.9 123.9 32.0 False None None False None False 3964.8 0 3610789 131240 None 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1303.43 1303.43 32.0 False None None False None False 41709.76 0 3610790 131240 None V-2page69 itm 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 74.34 74.34 192.0 False None None False None False 14273.28 0 3610791 131240 None 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 168.45 False None None False None False 10853.2335 0 3610792 131240 None V-2page105 itm 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4115.96 4115.96 74.84 False None None False None False 308038.4464 0 3610793 131240 None V-2page109 itm 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 8343.43 8343.43 69.39 False None None False None False 578950.6077 0 3610794 131240 None V-2page109 itm 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 7085.84 7085.84 6.84 False None None False None False 48467.1456 0 3610795 131240 None V-2page 86itm11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 208.15 208.15 1600.83 False None None False None False 333212.7645 0 3610796 131240 None V-2page 111itm 12.93.1 Providing and fixing factory made single extruded WPC (WoodPolymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Size 62 x 100mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work m 869.78 869.78 64.35 False None None False None False 55970.343 0 3610797 131240 None V-2page84 itm 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kgs 168.5 168.5 1724.91 False None None False None False 290647.335 0 3610798 131240 None V-2page 41itm 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 386.57 386.57 1763.82 False None None False None False 681839.8974 0 3610799 131240 None V-2page 43 itm 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 261.43 261.43 1176.83 False None None False None False 307658.6669 0 3610800 131240 None V-2page50 itm 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 123.9 123.9 2919.03 False None None False None False 361667.817 0 3610801 131240 None V-2page42itm 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 432.41 432.41 975.48 False None None False None False 421807.3068 0 3610802 131240 None V-2page41 itm 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 438.61 438.61 163.05 False None None False None False 71515.3605 0 3610803 131240 None 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 2013.85 False None None False None False 94812.058 0 3610804 131240 None 10.5.2 Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 254.88 254.88 13.0 False None None False None False 3313.44 0 3610805 131240 None V-2page 54itm 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 628.05 False None None False None False 40465.2615 0 3610806 131240 None V-2page61itm 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1455.83 1455.83 580.89 False None None False None False 845677.0887 0 3610807 131240 None V-2page59 itm9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 991.2 991.2 71.5 False None None False None False 70870.8 0 3610808 131240 None V-2page63 itm 9.32 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3199.1 3199.1 34.54 False None None False None False 110496.914 0 3610809 131240 None V-2page 4 itm 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 365.51 365.51 316.07 False None None False None False 115526.7457 0 3610810 131240 None V-2page 60 itm 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1101.47 1101.47 59.14 False None None False None False 65140.9358 0 3610811 131240 None V-2page65 itmv9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1795.31 1795.31 259.57 False None None False None False 466008.6167 0 3610812 131240 None V-2 page85 itm11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 700.04 700.04 357.82 False None None False None False 250488.3128 0 3610813 131240 None V-2 page 48itm 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 157.35 157.35 2741.14 False None None False None False 431318.379 0 3610814 131240 None V-2page 46itm8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 193.28 193.28 759.66 False None None False None False 146827.0848 0 3610815 131240 None V-2page47 itm8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 61.95 61.95 96.21 False None None False None False 5960.2095 0 3610816 131240 None V-2page48 itm 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 142.49 142.49 76.23 False None None False None False 10862.0127 0 3610817 131240 None V-2page47itm 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 65.67 65.67 179.6 False None None False None False 11794.332 0 3610818 131240 None 8.82 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 838.8 838.8 179.6 False None None False None False 150648.48 0 3610819 131240 None V-2page64itm 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2044.35 2044.35 17.32 False None None False None False 35408.142 0 3610820 131240 None V-2page77 itm 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5548.24 5548.24 5.25 False None None False None False 29128.26 0 3610821 131240 None 15.12 Newly Constructed Roof/Podium with PU Waterproof coating Above 500 m2. Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids 85%, Tensile strength 2 Mpa as per ASTM D 412, Elongation at break 400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness 55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo textile over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1443.44 1443.44 726.5 False None None False None False 1048659.16 0 3610822 131240 None V-2PAGE22 ITM 7.17 Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers over the existing purlins, rafters and trusses including cost of materials, labour, complete as per specifications ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 411.35 411.35 24.74 False None None False None False 10176.799 0 3610823 131240 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR PLINTH BEAM ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 94.35 False None None False None False 1199916.882 0 3610824 131240 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC BEAMS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 51.01 False None None False None False 691979.2156 0 3610825 131240 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC SLAB ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 115.4 False None None False None False 1467624.888 0 3610826 131240 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC STARICASE ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 7.07 False None None False None False 89914.2804 0 3610827 131240 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR LINTEL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 12.12 False None None False None False 164414.5872 0 3610828 131240 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11911.13 11911.13 14.18 False None None False None False 168899.8234 0 3610829 131240 None 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4317.92 4317.92 20.48 False None None False None False 88431.0016 0 3610830 131240 None 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 141.25 141.25 36.0 False None None False None False 5085.0 0 3610831 131240 None 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1642.91 1642.91 56.5 False None None False None False 92824.415 0 3610832 131240 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 30.54 False None None False None False 201606.4506 0 3610833 131240 None 10.1.2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4877.94 4877.94 9.69 False None None False None False 47267.2386 0 3610834 131240 None 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 761.99 761.99 92.01 False None None False None False 70110.6999 0 3610835 131240 None 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 350.64 350.64 215.82 False None None False None False 75675.1248 0 3610836 131240 None 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 68.92 False None None False None False 24849.106 0 3610837 131240 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3533.63 3533.63 11.09 False None None False None False 39187.9567 0 3610838 131240 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 13.73 False None None False None False 90637.0847 0 3610839 131240 None 10.1.1 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4963.43 4963.43 3.81 False None None False None False 18910.6683 0 3610840 131240 None 1.4.1 V-1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 11.06 False None None False None False 3316.2304 0 3610841 131240 None 1.4.2 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 320.9 320.9 1.7 False None None False None False 545.53 0 3610842 131240 None 17.5 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1391.4 1391.4 7.0 False None None False None False 9739.8 0 3610843 131240 None 17.1 V-2 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1241.48 1241.48 0.28 False None None False None False 347.6144 0 3610844 131240 None 17.2 V-2 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1469.45 1469.45 0.14 False None None False None False 205.723 0 3610845 131240 None 17. V-2 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1476.89 1476.89 0.14 False None None False None False 206.7646 0 3610846 131240 None 17.4 V-2 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1659.02 1659.02 0.14 False None None False None False 232.2628 0 3610847 131240 None 17.14 V-2 Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 @ 6kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1449.63 1449.63 1.0 False None None False None False 1449.63 0 3610848 131240 None V3 305.3.4 Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 130.1 130.1 60.0 False None None False None False 7806.0 0 3610849 131240 None V-3 4.2 Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 2922.8 2922.8 30.0 False None None False None False 87684.0 0 3610850 131240 None V3 6.1 ISSUE RATE Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 MPa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 6095.88 6095.88 20.0 False None None False None False 121917.6 0 3610851 131240 None V-3 6.2 ISSUE RATE Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11107.64 11107.64 40.0 False None None False None False 444305.6 0 3610852 131240 None V-3 8.10 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 105.32 105.32 15.0 False None None False None False 1579.8 0 3610853 131240 None V-3 Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 87.97 87.97 448.0 False None None False None False 39410.56 0 3610854 131240 None V-314621A Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 250 x 100 mm Kerb Stone ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 296.12 296.12 100.0 False None None False None False 29612.0 0 3610855 131240 None 2.1.4 V-1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7702.86 7702.86 1.2 False None None False None False 9243.432 0 3610856 131240 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9156.76 9156.76 6.48 False None None False None False 59335.8048 0 3610857 131240 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 459.67 459.67 192.0 False None None False None False 88256.64 0 3610858 131240 None 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 220.54 220.54 192.0 False None None False None False 42343.68 0 3610859 131240 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (FOR COMPOUND WALL) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8761.09 8761.09 9.36 False None None False None False 82003.8024 0 3610860 131240 None 8.20 V-3 Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 672.78 672.78 390.0 False None None False None False 262384.2 0 3610861 131240 None V1 1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Depth exceeding 1.5 m, but not exceeding 3 m FOR SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 526.58 526.58 22.51 False None None False None False 11853.3158 0 3610862 131240 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Raft for Water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8732.83 8732.83 4.32 False None None False None False 37725.8256 0 3610863 131240 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Outer wall water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9326.32 9326.32 5.89 False None None False None False 54932.0248 0 3610864 131240 None V2 15.14 UGT/OHT (inside) waterproofing with Antimicrobial CoatingProviding and Applying two component, waterbased food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 300 of US FDA, having mixing Ratio (Base: Hardener: Water) 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster, and that Item No. 4 is completed across the entire surface prior to applying the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2072.85 2072.85 36.6 False None None False None False 75866.31 0 3610865 131240 None V5 18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2430.92 2430.92 8.0 False None None False None False 19447.36 0 3610866 131240 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RC WALL FOR SEPTIC TANK ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 9.87 False None None False None False 142260.3567 0 3610867 131240 None 15.5 V-2 Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of 25 MPa (as per ASTM D 412), elongation of 500% (as per ASTM D 412), puncture resistance of 1000N (as per ASTM E 154), peel adhesion to concrete 1200N/m (as per ASTM D 903), hydrostatic head resistance 70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self adhesive polymer layer, etc, including surface preparation completely as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 749.6 749.6 63.57 False None None False None False 47652.072 0 3610868 131240 None 8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 110.27 110.27 20.1 False None None False None False 2216.427 0 3610869 131240 None V-5P140I12.4 Geophysical investigation of site for sinking Borewell for supplying drinking water to Habitation either through the Handpump, MWS or PWSS by vertical sounding by adopting veener sounding by adopting veener or schlumbergers's including reconassiance of survey of Geological formation,geophysical investigation of existing ground water in the vicinity quality, quantity and acceptability of the user including the location of site,recommended department of casing pipe required to seal the top and consolidated formation including an extra depth of 1.00Mtr in consolidated formation including an extra depth of drilling required to cover full depth of occupier proposed to trap probable yield and other information required including transportation of instrument and accessories to work site engaging technical personnel labour required etc complete as directed by Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6551.83 6551.83 1.0 False None None False None False 6551.83 0 3610870 131240 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 458.43 458.43 50.0 False None None False None False 22921.5 0 3610871 131240 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above 50 Mtrs and upto 100 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 574.9 574.9 50.0 False None None False None False 28745.0 0 3610872 131240 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above100 Mtrs. and upto 150 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 610.83 610.83 50.0 False None None False None False 30541.5 0 3610873 131240 None V-5P143I12.32 Supply Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2394.99 2394.99 20.0 False None None False None False 47899.8 0 3610874 131240 None V-5P155I13.28 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 681.45 681.45 150.0 False None None False None False 102217.5 0 3610875 131240 None V-5P143I12.33 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 1.0 False None None False None False 185.85 0 3610876 131240 None V-5P154I12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 203.2 203.2 1.0 False None None False None False 203.2 0 3610877 131240 None 18-19 SR13.81.3 Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 260.19 260.19 1.0 False None None False None False 260.19 0 3610878 131240 None V-5P154I13.11.5 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00" - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. 5.00 HP - 90 LPM @ 66 m = 10 STG Outlet Dia - 2.00" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39817.74 39817.74 1.0 False None None False None False 39817.74 0 3610879 131240 None V-5P155I13.23 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter Up to 6 HP - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11832.45 11832.45 1.0 False None None False None False 11832.45 0 3610880 131240 None V-5P155I13.29 Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets. complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1920.45 1920.45 1.0 False None None False None False 1920.45 0 3610881 131240 None V-5P155I13.31 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 49.56 49.56 100.0 False None None False None False 4956.0 0 3610882 131240 None V-5P156I13.32 Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job. as per specifications, with testing of as per instructions of engineer incharge of work - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 8053.5 8053.5 1.0 False None None False None False 8053.5 0 3610883 131240 None V-5P156I13.33 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 1672.65 1672.65 1.0 False None None False None False 1672.65 0 3610884 131240 None 2.6.2 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4 mm2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 208.15 208.15 165.0 False None None False None False 34344.75 0 3610885 131240 None V-5P20I5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour enameled metal paint etc., complete 16 SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 30000.0 False None None False None False 15900.0 0 3610886 131240 None V-5P21I5.44.4 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase /Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600mmx600mmx170mm. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17990.28 17990.28 1.0 False None None False None False 17990.28 0 3610887 131240 None 5.6.6 V-6 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20" x 2.5" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 404.08 404.08 1.0 False None None False None False 404.08 0 3610888 131240 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 1.0 False None None False None False 514.19 0 3610889 131240 None 13.18.1 Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15A to 63A TPST ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 344.44 344.44 1.0 False None None False None False 344.44 0 3610890 131240 None 5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 1.0 False None None False None False 594.72 0 3610891 131240 None 1.23 Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 3323.0 3323.0 164.36 False None None False None False 546168.28 0 1721828234000 0 None None Buildings MUDNOOR IN SHORAPUR TALUK OF YADGIR DISTRICT (WATER SUPPLY AND SANITARY WORKS) 2711710.47 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3610892 131241 None V-2 13.50.5 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm dia pipes, From wash basin waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 376.66 376.66 50.0 False None None False None False 18833.0 0 3610893 131241 None V-2 13.50.6 Providing and fixing normal gauge polythene pipes of approved quality Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm dia pipes, From sink & urinal waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 478.25 478.25 20.0 False None None False None False 9565.0 0 3610894 131241 None V-2 13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 358.07 358.07 185.0 False None None False None False 66242.95 0 3610895 131241 None V-2 13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 477.02 477.02 120.0 False None None False None False 57242.4 0 3610896 131241 None V-2 IT.NO 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 244.08 244.08 35.0 False None None False None False 8542.8 0 3610897 131241 None V-2 IT.NO 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 50.0 False None None False None False 18027.5 0 3610898 131241 None V-2 P.NO 128 IT.NO 13.63 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 302.32 302.32 55.0 False None None False None False 16627.6 0 3610899 131241 None V-2 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1511.58 1511.58 21.0 False None None False None False 31743.18 0 3610900 131241 None V-2 P.NO 127 IT.NO 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6891.32 6891.32 4.0 False None None False None False 27565.28 0 3610901 131241 None V-2 P.NO 130 IT.NO 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 614.54 614.54 4.0 False None None False None False 2458.16 0 3610902 131241 None V-2 P.NO 123 IT.NO 14.38 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 179.66 179.66 4.0 False None None False None False 718.64 0 3610903 131241 None V-2 P.NO 178 IT.NO 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :: W.C. pan with ISI marked white solid plastic seat and lid" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7405.5 7405.5 9.0 False None None False None False 66649.5 0 3610904 131241 None V-2 P.NO 124 IT.NO14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6051.28 6051.28 10.0 False None None False None False 60512.8 0 3610905 131241 None V-2 P.NO 126 IT.NO 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6296.6 6296.6 2.0 False None None False None False 12593.2 0 3610906 131241 None V-2 P.NO 126 IT.NO 14.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (510x1040 mm bowl depth 250 mm)" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6960.7 6960.7 4.0 False None None False None False 27842.8 0 3610907 131241 None V-2 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 898.28 898.28 12.0 False None None False None False 10779.36 0 3610908 131241 None V-2 P.NO 124 IT.NO 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3818.6 3818.6 13.0 False None None False None False 49641.8 0 3610909 131241 None V-2 P.NO 120 IT.NO 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 382.85 382.85 90.0 False None None False None False 34456.5 0 3610910 131241 None V-2 P.NO 120 IT.NO 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 20 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 469.58 469.58 70.0 False None None False None False 32870.6 0 3610911 131241 None V-2 p.NO 120 IT.NO 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 25 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 70.0 False None None False None False 41370.0 0 3610912 131241 None V-2 P.NO 120 IT.NO 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 690.12 690.12 30.0 False None None False None False 20703.6 0 3610913 131241 None V-2 P.NO 120 IT.NO 13.31.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 664.1 664.1 20.0 False None None False None False 13282.0 0 3610914 131241 None V-2 P.NO 120IT.NO 13.31.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 967.66 967.66 20.0 False None None False None False 19353.2 0 3610915 131241 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 268.86 268.86 50.0 False None None False None False 13443.0 0 3610916 131241 None V-2 P.NO 120 IT.NO 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 366.74 366.74 50.0 False None None False None False 18337.0 0 3610917 131241 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 215.0 False None None False None False 127065.0 0 3610918 131241 None V-2 P.NO 120 IT.NO 13.33.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 65mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 1734.6 1734.6 25.0 False None None False None False 43365.0 0 3610919 131241 None V-2 P.NO 120 IT.NO 13.33.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 50mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 893.32 893.32 40.0 False None None False None False 35732.8 0 3610920 131241 None V2 13.5.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :" 25 mm nominal bore ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 411.35 411.35 12.0 False None None False None False 4936.2 0 3610921 131241 None V2-13.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 740.92 740.92 7.0 False None None False None False 5186.44 0 3610922 131241 None V-2 13.4.3 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 869.78 869.78 9.0 False None None False None False 7828.02 0 3610923 131241 None v2-13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1059.35 1059.35 2.0 False None None False None False 2118.7 0 3610924 131241 None V-2,A-13, IT.NO 13.2.1 Brass bib-cock 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 354.35 354.35 19.0 False None None False None False 6732.65 0 3610925 131241 None V-2 IT.NO 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Ltr 11.15 11.15 3000.0 False None None False None False 33450.0 0 3610926 131241 None V2 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 182.13 182.13 125.0 False None None False None False 22766.25 0 3610927 131241 None Market Rate Providing and fixing 7.50cms to 15cms dia N.P. Grating 100mm dia. (Page.91/I.No.12.111) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 177.0 177.0 55.0 False None None False None False 9735.0 0 3610928 131241 None Market Rate Air Vent Cowel 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 413.0 413.0 12.0 False None None False None False 4956.0 0 3610929 131241 None Market Rate Air Vent Cowel 110mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 590.0 590.0 12.0 False None None False None False 7080.0 0 3610930 131241 None Market Rate Supplying and fixing Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards with a single 15mm C.P. 32mm dia CP waste coupling, 32mmdia heavy duty CP bottle trap with extension pipe, CP wall flanges, 2 Nos.15mm dia C.P. angle cocks, 2nos.C.P. flexible inlet connection pipes, CI brackets etc., complete including silicon sealant filling. (Jaguar make or Equalent ) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6844.0 6844.0 9.0 False None None False None False 61596.0 0 3610931 131241 None Market Rate Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2183.0 2183.0 9.0 False None None False None False 19647.0 0 3610932 131241 None Market Rate Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 95.0 False None None False None False 72865.0 0 3610933 131241 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. a) 65mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4130.0 4130.0 2.0 False None None False None False 8260.0 0 3610934 131241 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. b) 50mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3304.0 3304.0 4.0 False None None False None False 13216.0 0 3610935 131241 None V2 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 345.68 345.68 4.0 False None None False None False 1382.72 0 3610936 131241 None V2 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5335.13 5335.13 18.0 False None None False None False 96032.34 0 3610937 131241 None V2 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with chase cutter and embed ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3455.57 3455.57 10.0 False None None False None False 34555.7 0 3610938 131241 None V2 13.28 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 79.3 79.3 70.0 False None None False None False 5551.0 0 3610939 131241 None 14.36.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 111.51 111.51 23.0 False None None False None False 2564.73 0 3610940 131241 None 14.37.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 379.13 379.13 23.0 False None None False None False 8719.99 0 3610941 131241 None 13.8.1.1 Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 102.84 102.84 23.0 False None None False None False 2365.32 0 3610942 131241 None 14.22.A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1003.59 1003.59 23.0 False None None False None False 23082.57 0 3610943 131241 None 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 768.18 768.18 53.0 False None None False None False 40713.54 0 3610944 131241 None V2 14.63A Providing and fixing Single lever sink mixer with swivel spout top outlet wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4667.31 4667.31 4.0 False None None False None False 18669.24 0 3610945 131241 None 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5518.51 5518.51 4.0 False None None False None False 22074.04 0 3610946 131241 None ELE 7.3 Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3 density Rock wool insulation with 22SWG Aluminium cladding." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 39372.94 39372.94 3.0 False None None False None False 118118.82 0 3610947 131241 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-110mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 944.0 944.0 10.0 False None None False None False 9440.0 0 3610948 131241 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-75mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 2.0 False None None False None False 1534.0 0 3610949 131241 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-160MM dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1298.0 1298.0 1.0 False None None False None False 1298.0 0 3610950 131241 None V-1,P.NO 6,IT.NO 1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 224.0 False None None False None False 67164.16 0 3610951 131241 None V-1 P.NO 7 IT.NO 1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 536.49 536.49 224.0 False None None False None False 120173.76 0 3610952 131241 None V-5 P.NO 134 IT.NO 10.3 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete. for:" Pipes of SN8 Self Fit - 160mm dia. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 764.46 764.46 300.0 False None None False None False 229338.0 0 3610953 131241 None V-5 P.NO 134 IT.NO 10.2.4 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:( For external Rain water Work ). - do - 160 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 713.66 713.66 70.0 False None None False None False 49956.2 0 3610954 131241 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 45.0 False None None False None False 304087.95 0 3610955 131241 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CATCH BASIN) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 15.0 False None None False None False 101362.65 0 3610956 131241 None 13.39 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3197.86 3197.86 25.0 False None None False None False 79946.5 0 3610957 131241 None 16.18 Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting and using of sight rails and boning rods wherever necessary, shoring and strutting wherever required using Ordinary Port Land Cement, using 1:1.5:3 proportion RCC with 20 mm and down graded jelly, well graded sand and steel of approved quality, 200 mm thick top concrete slab, having wall thickness and raft thickness as in approved drawings and with an offset in raft alround the chamber as in approved drawing, benching concrete with 1:6 slope towards the central drain finished smooth, including fixing and grouting of pipes, including conveying to work spot supply and fixing SFRC Machinehole cover and frame (Heavy duty) conforming to IS:12592 with latest amendments, on a bed of CC 1:2:4 Providing and fixing of minimum 3 mm thick encapsulated plastic footsteps (as per IS 10910) on 12 mm dia. Grade Fe-500 steel bar (as per IS 1786) staggered at 300 mm apart as detailed in Technical specifications, including stone grit beding wherever required, watering, curing, engraving Machinehole number with flow direction on the inner cylindrical surface etc., complete including cost of reinforcement steel and fabrication charges and also cost and conveyance of all materials, labour with all lead and lifts. The Pre-cast RCC Machinehole are for various diamters and depths as stated below and as per detailed drawings, specifications and direction of the Engineer. For 1.2m dia Machinehole:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 97246.63 97246.63 1.0 False None None False None False 97246.63 0 3610958 131241 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 80.0 False None None False None False 47280.0 0 3610959 131241 None 13.23 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (50 mm nominal bore, 242mm long, weighing not less than 1240 g) T. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1665.22 1665.22 5.0 False None None False None False 8326.1 0 3610960 131241 None 13.40.1 V-5 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. (pump room collection sump pumps) (2 HP, Size 65x50 Head 13M, Discharge 462 LPM) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19340.79 19340.79 2.0 False None None False None False 38681.58 0 3610961 131241 None 13.32 V-5 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 8053.5 8053.5 2.0 False None None False None False 16107.0 0 1721828234000 0 None None Buildings MUDNOOR IN SHORAPUR TALUK OF YADGIR DISTRICT (ELECTRICAL WORKS) 4364380.98 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3610962 131242 None PWD ELE SR V-6 IT.NO 2.2.1 WIRES & CABLES Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 333.29 333.29 25.0 False None None False None False 8332.25 0 3610963 131242 None PWD ELE SR V-10 IT.NO 2.2.2 Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Pack 469.58 469.58 36.0 False None None False None False 16904.88 0 3610964 131242 None PWD ELE SR V-11 IT.NO 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 687.65 687.65 63.0 False None None False None False 43321.95 0 3610965 131242 None PWD ELE SR V-12 IT.NO 2.2.4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 838.8 838.8 8.0 False None None False None False 6710.4 0 3610966 131242 None PWD ELE SR V-14 IT.NO 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 170.98 170.98 25.0 False None None False None False 4274.5 0 3610967 131242 None PWD ELE SR V-15 IT.NO 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 197.0 197.0 32.0 False None None False None False 6304.0 0 3610968 131242 None PWD ELE SR V-16 IT.NO 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 219.3 219.3 16.0 False None None False None False 3508.8 0 3610969 131242 None PWD ELE SR V-17 IT.NO 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 272.58 272.58 7.0 False None None False None False 1908.06 0 3610970 131242 None PWD ELE SR V-18 IT.NO 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 323.38 323.38 20.0 False None None False None False 6467.6 0 3610971 131242 None PWD ELE SR V-20 IT.NO 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 199.48 199.48 32.0 False None None False None False 6383.36 0 3610972 131242 None PWD ELE SR V-21 IT.NO 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 216.83 216.83 16.0 False None None False None False 3469.28 0 3610973 131242 None PWD ELE SR V-22 IT.NO 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 289.93 289.93 7.0 False None None False None False 2029.51 0 3610974 131242 None PWD ELE SR V-23 IT.NO 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 351.88 351.88 21.0 False None None False None False 7389.48 0 3610975 131242 None PWD ELE SR V-24 IT.NO 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 426.22 426.22 31.0 False None None False None False 13212.82 0 3610976 131242 None PWD ELE SR V-26 IT.NO 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 126.38 126.38 217.0 False None None False None False 27424.46 0 3610977 131242 None PWD ELE SR V-6 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 205.67 205.67 2.0 False None None False None False 411.34 0 3610978 131242 None PWD ELE SR V-6,IT.NO 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 211.87 211.87 81.0 False None None False None False 17161.47 0 3610979 131242 None PWD ELE SR V-6,IT.NO 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 442.32 442.32 24.0 False None None False None False 10615.68 0 3610980 131242 None PWD ELE SR V-6,IT.NO 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 223.02 223.02 10.0 False None None False None False 2230.2 0 3610981 131242 None PWD ELE SR V-6, IT.NO 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 403.91 403.91 15.0 False None None False None False 6058.65 0 3610982 131242 None PWD ELE SR V-6,IT.NO 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 292.4 292.4 25.0 False None None False None False 7310.0 0 3610983 131242 None PWD ELE SR V-6,IT.NO 1.13 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 144.96 144.96 24.0 False None None False None False 3479.04 0 3610984 131242 None PWD ELE SR V-6,IT.NO-1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 81.77 81.77 890.0 False None None False None False 72775.3 0 3610985 131242 None PWD ELE SR V-6,IT.NO 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 96.64 96.64 1030.0 False None None False None False 99539.2 0 3610986 131242 None PWD ELE SR V-6, IT.NO .2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 127.62 127.62 250.0 False None None False None False 31905.0 0 3610987 131242 None PWD ELE SR V-6,IT.NO1.3.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 84.25 84.25 445.0 False None None False None False 37491.25 0 3610988 131242 None PWD ELE SR V-6,IT.NO-1.3.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 97.88 97.88 515.0 False None None False None False 50408.2 0 3610989 131242 None PWD ELE SR V-6,IT.NO-1.3.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 122.66 122.66 150.0 False None None False None False 18399.0 0 3610990 131242 None PWD ELE SR V-6,IT.NO 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 32.21 32.21 470.0 False None None False None False 15138.7 0 3610991 131242 None PWD ELE SR V-6,IT.NO 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 52.04 52.04 1530.0 False None None False None False 79621.2 0 3610992 131242 None PWD ELE SR V-6,IT.NO 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 78.06 78.06 740.0 False None None False None False 57764.4 0 3610993 131242 None PWD ELE SR V-6,IT.NO 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 113.99 113.99 580.0 False None None False None False 66114.2 0 3610994 131242 None PWD ELE SR V-6,IT.NO 5.19.11 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5003.08 5003.08 2.0 False None None False None False 10006.16 0 3610995 131242 None PWD ELE SR V-6,IT.NO 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 6-32Amps SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 62.0 False None None False None False 31879.78 0 3610996 131242 None PWD ELE SR V-6 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 40Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3771.52 3771.52 2.0 False None None False None False 7543.04 0 3610997 131242 None PWD ELE SR V-6,IT.NO 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5299.2 5299.2 2.0 False None None False None False 10598.4 0 3610998 131242 None PWD ELE SR V-6,IT.NO 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 480.73 480.73 10.0 False None None False None False 4807.3 0 3610999 131242 None PWD ELE SR V-6,IT.NO 6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39.65 39.65 16.0 False None None False None False 634.4 0 3611000 131242 None V-6 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4348.89 4348.89 7.0 False None None False None False 30442.23 0 3611001 131242 None V-6 12.58.2 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 101.6 101.6 100.0 False None None False None False 10160.0 0 3611002 131242 None 12.58.6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600X600X3 GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1084.13 1084.13 6.0 False None None False None False 6504.78 0 3611003 131242 None 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10 12W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1096.52 1096.52 19.0 False None None False None False 20833.88 0 3611004 131242 None 11.5.3 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1640.44 1640.44 5.0 False None None False None False 8202.2 0 3611005 131242 None 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 854.91 854.91 51.0 False None None False None False 43600.41 0 3611006 131242 None 11.11.3 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 184.61 184.61 15.0 False None None False None False 2769.15 0 3611007 131242 None PWD ELE SR V-6,IT.NO 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1848.59 1848.59 13.0 False None None False None False 24031.67 0 3611008 131242 None PWD ELE SR V-6,IT.NO 6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3316.8 3316.8 24.0 False None None False None False 79603.2 0 3611009 131242 None PWD ELE SR V-6,IT.NO 13.11 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 390.29 390.29 24.0 False None None False None False 9366.96 0 3611010 131242 None PWD ELE SR V-6,IT.NO 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 151.16 151.16 83.0 False None None False None False 12546.28 0 3611011 131242 None PWD ELE SR V-6,IT.NO 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 875.97 875.97 13.0 False None None False None False 11387.61 0 3611012 131242 None PWD ELE SR V-6,IT.NO 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 200.72 200.72 3.0 False None None False None False 602.16 0 3611013 131242 None PWD ELE SR V-6,IT.NO 5.42.1 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 86000.0 False None None False None False 45580.0 0 3611014 131242 None PWD ELE SR V-6,IT.NO 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 5.0 False None None False None False 21279.85 0 3611015 131242 None PWD ELE SR V-6,IT.NO 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 10.0 False None None False None False 3779.0 0 3611016 131242 None PWD ELE SR V-6,IT.NO 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 10.0 False None None False None False 9366.8 0 3611017 131242 None PWD ELE SR V-6,IT.NO 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) 100Amps 25kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 10515.39 10515.39 1.0 False None None False None False 10515.39 0 3611018 131242 None PWD ELE SR V-6,iT.NO 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps DP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 10.0 False None None False None False 38260.3 0 3611019 131242 None PWD ELE SR V-6,IT.NO 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11541.29 11541.29 1.0 False None None False None False 11541.29 0 3611020 131242 None PWD ELE SR V-6,IT.NO 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3611021 131242 None PWD ELE SR V-6,IT.NO 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 696.32 696.32 3.0 False None None False None False 2088.96 0 3611022 131242 None PWD ELE SR V-6,IT.NO5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 15.0 False None None False None False 8920.8 0 3611023 131242 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way SP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2885.63 2885.63 2.0 False None None False None False 5771.26 0 3611024 131242 None 5.19.12 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6120.66 6120.66 1.0 False None None False None False 6120.66 0 3611025 131242 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 1.0 False None None False None False 3826.03 0 3611026 131242 None 5.20.8 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6377.13 6377.13 3.0 False None None False None False 19131.39 0 3611027 131242 None 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 109549.9 109549.9 0.1 False None None False None False 10954.99 0 3611028 131242 None 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 35 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 190882.82 190882.82 0.05 False None None False None False 9544.141 0 3611029 131242 None 32.13 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 70 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 393892.97 393892.97 0.1 False None None False None False 39389.297 0 3611030 131242 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.05 False None None False None False 1293.8875 0 3611031 131242 None 31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 38581.22 38581.22 0.2 False None None False None False 7716.244 0 3611032 131242 None 6.17.6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 15.41 15.41 20.0 False None None False None False 308.2 0 3611033 131242 None 16.17.10 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 70 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 148.68 148.68 16.0 False None None False None False 2378.88 0 3611034 131242 None 11.11.5 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 333.29 333.29 9.0 False None None False None False 2999.61 0 3611035 131242 None 11.6.3 Supplying of recess mounting non integral type .LED . W luminaire comprising of pressure decastextruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' 34 36watt ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5641.17 5641.17 8.0 False None None False None False 45129.36 0 3611036 131242 None 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4985.74 4985.74 2.0 False None None False None False 9971.48 0 3611037 131242 None 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1810.18 1810.18 3.0 False None None False None False 5430.54 0 3611038 131242 None 5.14.1 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 2738.19 2738.19 2.0 False None None False None False 5476.38 0 3611039 131242 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 169.74 169.74 24.0 False None None False None False 4073.76 0 3611040 131242 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 395.24 395.24 31.0 False None None False None False 12252.44 0 3611041 131242 None 2.2.5 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 1225.37 1225.37 4.0 False None None False None False 4901.48 0 3611042 131242 None 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 144.96 144.96 6.0 False None None False None False 869.76 0 3611043 131242 None 12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 78.06 78.06 21.0 False None None False None False 1639.26 0 3611044 131242 None 3.6.11 TV/Telephone socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 193.28 193.28 2.0 False None None False None False 386.56 0 3611045 131242 None 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 304.79 304.79 1.0 False None None False None False 304.79 0 3611046 131242 None 32.02 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 2 core 10 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 98168.45 98168.45 0.1 False None None False None False 9816.845 0 3611047 131242 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.1 False None None False None False 2587.775 0 3611048 131242 None pwd sr Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 15.41 15.41 15.0 False None None False None False 231.15 0 3611049 131242 None 11..11.7 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500-degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 527.81 527.81 3.0 False None None False None False 1583.43 0 3611050 131242 None 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 64.43 64.43 2.0 False None None False None False 128.86 0 3611051 131242 None 11.8.1 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 25watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3004.58 3004.58 1.0 False None None False None False 3004.58 0 3611052 131242 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers32Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 298.6 298.6 1.0 False None None False None False 298.6 0 3611053 131242 None 5.30 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1709.82 1709.82 1.0 False None None False None False 1709.82 0 3611054 131242 None 7.1.3 Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting.25Litres ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 12689.84 12689.84 1.0 False None None False None False 12689.84 0 3611055 131242 None PWD SR 2023-24 Volume 6 It No-9.3.3 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. 5 kVA ON LINE UPS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 84726.54 84726.54 1.0 False None None False None False 84726.54 0 3611056 131242 None PWD SR 2023-24 Volume 6 It No-9.5.9 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150AH capacity ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19693.91 19693.91 4.0 False None None False None False 78775.64 0 3611057 131242 None A.R Item Name : The Tenderer (agency) should arrange to obtain (get), detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration &proof checking by reputedGovernment/Semi Government/IISC /IIT/NIT/or as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, 3D view, MFP design and Drawings, Internal and External Electrical services including electrical infrastructure, etc. Interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project and 6 sets of as built drawings should be submitted to the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 300000.0 300000.0 1.0 False None None False None False 300000.0 0 3611058 131242 None LQR IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),30M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 23836.0 23836.0 4.0 False None None False None False 95344.0 0 3611059 131242 None LQR IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),60M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 25606.0 25606.0 2.0 False None None False None False 51212.0 0 3611060 131242 None LQR Supplying, installation, testing and commissioning of SITC of complete 8 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up to 16 channels),internal storage supports 8HDDs expandable up to 64TB (8TB each),operating temperatures(-10 degree C) and (55 degree C),UL,CE,FCC. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3611061 131242 None LQR Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17110.0 17110.0 2.0 False None None False None False 34220.0 0 3611062 131242 None LQR Supply and Installation of I/Os ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 147.5 147.5 12.0 False None None False None False 1770.0 0 3611063 131242 None LQR Supply and Installation of 2 Mtrs Patch Chord The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 265.5 265.5 12.0 False None None False None False 3186.0 0 3611064 131242 None LQR Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 336.3 336.3 6.0 False None None False None False 2017.8 0 3611065 131242 None LQR Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3611066 131242 None V-6 8.1 Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 600.0 False None None False None False 28248.0 0 3611067 131242 None 1.2.2 Supplying heavy gauge PVC Consealed conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 96.64 96.64 500.0 False None None False None False 48320.0 0 3611068 131242 None 8.12.3 Supplying & Fixing of Patch panel for LAN cabling .16 Port 10/100 patch panel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3778.95 3778.95 1.0 False None None False None False 3778.95 0 3611069 131242 None 8.4.1 v-6 Supplying & Fixing of switch mounting rack with power manager & Cable manager 4U with 450mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6061.19 6061.19 1.0 False None None False None False 6061.19 0 3611070 131242 None 1.01 Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 8767.16 8767.16 8.0 False None None False None False 70137.28 0 3611071 131242 None 2.02 Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1379.01 1379.01 8.0 False None None False None False 11032.08 0 3611072 131242 None 6.05 Supply of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 107.79 107.79 6.0 False None None False None False 646.74 0 3611073 131242 None 13.12 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 6.0 False None None False None False 356.82 0 3611074 131242 None 2.16 Supply of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 296.12 296.12 11.0 False None None False None False 3257.32 0 3611075 131242 None 2.16 Erection of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 115.23 115.23 11.0 False None None False None False 1267.53 0 3611076 131242 None 68.17 Supply and fixing of Caution/Danger Board ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 185.85 185.85 6.0 False None None False None False 1115.1 0 3611077 131242 None 4.02 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 110.27 110.27 8.0 False None None False None False 882.16 0 3611078 131242 None 5.09 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 52.04 52.04 8.0 False None None False None False 416.32 0 3611079 131242 None 24.05 Supply and fixing of 11 kV, 400 Amps Double Break GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 26341.14 26341.14 1.0 False None None False None False 26341.14 0 3611080 131242 None 24.07 Supply and fixing of H-Frame for mounting GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7521.97 7521.97 1.0 False None None False None False 7521.97 0 3611081 131242 None 25.01 Supply of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 7279.13 7279.13 1.0 False None None False None False 7279.13 0 3611082 131242 None 13.01 Erection of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 293.64 293.64 1.0 False None None False None False 293.64 0 3611083 131242 None 13.07 Supply, erection, testing and commissioning of 63 KVA 5Star rated Aluminium wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, , oil level indicator with + 5% to -10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 210958.34 210958.34 1.0 False None None False None False 210958.34 0 3611084 131242 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 4348.89 4348.89 8.0 False None None False None False 34791.12 0 3611085 131242 None 12.58.3 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work MT 158.59 158.59 100.0 False None None False None False 15859.0 0 3611086 131242 None 12.58.9 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2035.68 2035.68 100.0 False None None False None False 203568.0 0 3611087 131242 None 12.58.11 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 9194.62 9194.62 10.0 False None None False None False 91946.2 0 3611088 131242 None 45.07 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Outdoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 5039.01 5039.01 4.0 False None None False None False 20156.04 0 3611089 131242 None 45.04 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Indoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 3887.98 3887.98 2.0 False None None False None False 7775.96 0 3611090 131242 None 36.01 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 1102296.17 1102296.17 0.1 False None None False None False 110229.617 0 3611091 131242 None 38. Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1222.89 1222.89 150.0 False None None False None False 183433.5 0 3611092 131242 None 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 176000.0 False None None False None False 93280.0 0 3611093 131242 None 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 6.0 False None None False None False 25535.82 0 3611094 131242 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 12.0 False None None False None False 4534.8 0 3611095 131242 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 12.0 False None None False None False 11240.16 0 3611096 131242 None 5.15.15 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 250Amps 35kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 29172.26 29172.26 1.0 False None None False None False 29172.26 0 3611097 131242 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3611098 131242 None 10.1.3 Supplying, installing, testing and commissioning of 25KVA/20kw Diesel Generator set(CPCB-4) with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 Generator set specificationsEngine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have + 1.0 % Voltage regulation (max) in static conditions- IP: 23 protections with insulation class H. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lamps for ‘Load On’ and ‘Set Running’, Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections. Genset Controller: microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface, Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory, Provide Alternator Data. Voltage (1 ph or 3 ph line to line and line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph and total), Frequency, Provide Engine Data, Starting battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Meter calibration, Engine controls, Power Start operates on 12 VDC batteries,- Auto start mode accepts a ground signal from remote devices to automatically start the DG set. The remote start will also wake up the control system from sleep mode. Acoustic enclosure: The acoustic enclosure shall be made of 1.6 mm thick CRCA sheets in suitable approved shade and a structural/ sheet metal base frame painted in black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75dBA at 1 mtr sound levels specified by Ministry of Environment & Forest. The enclosure has the following features: Specially designed to meet stringent MOEF/ CPCB norms of 75dBA @ 1mtr at 75% load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 558914.14 558914.14 1.0 False None None False None False 558914.14 0 3611099 131242 None 10.2.2 Supply, Erection, testing and commissioning of AMF panel suitable for .KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .amps 4 pole contactor for alternator with thermal O/L relay,. Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and flat/Boost facility. 25 KVA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 72742.93 72742.93 1.0 False None None False None False 72742.93 0 3611100 131242 None A.R Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 3540.0 3540.0 5.0 False None None False None False 17700.0 0 3611101 131242 None A.R Supply and laying of 2Cx2.5SQ MM and 6CX2.5 SQ MM Sheilded Sensor and control Cables ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 236.0 236.0 50.0 False None None False None False 11800.0 0 3611102 131242 None 58.02 LT Metering Cubicle at Low Tension for 50KW to 150KW having specification and design as per the prototype approval (Excluding Meter cost and modem cost) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 98973.8 98973.8 1.0 False None None False None False 98973.8 0 3611103 131242 None 53.01 CT PT Operated ETV Meter 0.2s Accuracy class with ABT feature and DLMS protocal with ToD with RS232 Port UNIDIRACTIONAL ( Used for HT Installation, LT Metering Cubicle (50-150KW) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 24302.99 24302.99 1.0 False None None False None False 24302.99 0 3611104 131242 None 10.01 Supply and fixing of PG Clamps for Rabbit Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 173.46 173.46 15.0 False None None False None False 2601.9 0 3611105 131242 None v-6 2.02 Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 603.39 603.39 6.0 False None None False None False 3620.34 0 3611106 131242 None v-6 2.02 Erection of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 318.42 318.42 6.0 False None None False None False 1910.52 0 3611107 131242 None v-6 6.06 Supply and fixing of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 254.0 254.0 18.0 False None None False None False 4572.0 0 3611108 131242 None v-6 6.10 Supply and fixing of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 235.45 235.45 18.0 False None None False None False 4238.1 0 3611109 131242 None 13.12 v-6 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 18.0 False None None False None False 1070.46 0 3611110 131242 None v-6 6.08 Supply and fixing of 15 Strain Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 73.1 73.1 4.0 False None None False None False 292.4 0 3611111 131242 None 7.02 Supply of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 57283.93 57283.93 1.0 False None None False None False 57283.93 0 3611112 131242 None 6.02 V-6 Erection of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 5403.28 5403.28 1.0 False None None False None False 5403.28 0 1721828234000 0 None None Buildings HEGGANDODDI IN SHORAPUR TALUK OF YADGIR DISTRICT 34812473.11 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3611113 131243 None CSR:V-3 PAGE NO 9 Itm 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work 100 Sqm 486.93 486.93 17.09 False None None False None False 8321.6337 0 3611114 131243 None V-1 page 8 itm 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 117.71 117.71 540.95 False None None False None False 63675.2245 0 3611115 131243 None V-1page 8 itm 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 126.38 126.38 1430.43 False None None False None False 180777.7434 0 3611116 131243 None V-1page 8 itm 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 449.76 449.76 254.05 False None None False None False 114261.528 0 3611117 131243 None V-3page 3 A Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 167.27 167.27 218.94 False None None False None False 36622.0938 0 3611118 131243 None V-2page5 itm 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 146.2 146.2 774.16 False None None False None False 113182.192 0 3611119 131243 None V-1pg7 itm1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 329.57 329.57 901.41 False None None False None False 297077.6937 0 3611120 131243 None V-1page7vitm1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 587.29 587.29 747.04 False None None False None False 438729.1216 0 3611121 131243 None V-1page 15 itm2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7420.37 7420.37 155.33 False None None False None False 1152606.0721 0 3611122 131243 None V-1page15 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR FOOTING ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8478.33 8478.33 177.95 False None None False None False 1508718.8235 0 3611123 131243 None V-1page16 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatess FOR PEDESTAL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8635.33 8635.33 13.4 False None None False None False 115713.422 0 3611124 131243 None V-1page15itm 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR COLUMNS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 57.58 False None None False None False 829924.1478 0 3611125 131243 None V-3page135itm15.4 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 252.76 252.76 13.0 False None None False None False 3285.88 0 3611126 131243 None V-2page55 itm 8.16.a Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1533.88 1533.88 13.81 False None None False None False 21182.8828 0 3611127 131243 None V-1page18itm2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. - Buildings ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Tonne 110837.22 110837.22 50.59 False None None False None False 5607254.9598 0 3611128 131243 None 18-19SR ITM4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No KBS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 38.94 38.94 145.02 False None None False None False 5647.0788 0 3611129 131243 None DATA RATE Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 86.14 86.14 145.02 False None None False None False 12492.0228 0 3611130 131243 None V-2PAGE 9 ITM5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7915.97 7915.97 8.76 False None None False None False 69343.8972 0 3611131 131243 None V-2PAGE 14 ITM 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1623.09 1623.09 1253.93 False None None False None False 2035241.2437 0 3611132 131243 None V-2page 14 itm 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1367.86 1367.86 171.24 False None None False None False 234232.3464 0 3611133 131243 None V-2 page100 itm 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 122431.79 122431.79 1.2 False None None False None False 146918.148 0 3611134 131243 None V-2 page 105 itm 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1258.82 1258.82 32.0 False None None False None False 40282.24 0 3611135 131243 None 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 681.45 681.45 64.0 False None None False None False 43612.8 0 3611136 131243 None 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 464.63 464.63 32.0 False None None False None False 14868.16 0 3611137 131243 None 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 64.0 False None None False None False 11894.4 0 3611138 131243 None 22.15.9 PProviding and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 86.73 86.73 128.0 False None None False None False 11101.44 0 3611139 131243 None 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 123.9 123.9 32.0 False None None False None False 3964.8 0 3611140 131243 None 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1303.43 1303.43 32.0 False None None False None False 41709.76 0 3611141 131243 None V-2page69 itm 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 74.34 74.34 192.0 False None None False None False 14273.28 0 3611142 131243 None 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 168.45 False None None False None False 10853.2335 0 3611143 131243 None V-2page105 itm 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4115.96 4115.96 74.84 False None None False None False 308038.4464 0 3611144 131243 None V-2page109 itm 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 8343.43 8343.43 69.39 False None None False None False 578950.6077 0 3611145 131243 None V-2page109 itm 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 7085.84 7085.84 6.84 False None None False None False 48467.1456 0 3611146 131243 None V-2page 86itm11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 208.15 208.15 1600.83 False None None False None False 333212.7645 0 3611147 131243 None V-2page 111itm 12.93.1 Providing and fixing factory made single extruded WPC (WoodPolymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Size 62 x 100mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work m 869.78 869.78 64.35 False None None False None False 55970.343 0 3611148 131243 None V-2page84 itm 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kgs 168.5 168.5 1724.91 False None None False None False 290647.335 0 3611149 131243 None V-2page 41itm 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 386.57 386.57 1763.82 False None None False None False 681839.8974 0 3611150 131243 None V-2page 43 itm 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 261.43 261.43 1176.83 False None None False None False 307658.6669 0 3611151 131243 None V-2page50 itm 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 123.9 123.9 2919.03 False None None False None False 361667.817 0 3611152 131243 None V-2page42itm 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 432.41 432.41 975.48 False None None False None False 421807.3068 0 3611153 131243 None V-2page41 itm 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 438.61 438.61 163.05 False None None False None False 71515.3605 0 3611154 131243 None 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 2013.85 False None None False None False 94812.058 0 3611155 131243 None 10.5.2 Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 254.88 254.88 13.0 False None None False None False 3313.44 0 3611156 131243 None V-2page 54itm 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 628.05 False None None False None False 40465.2615 0 3611157 131243 None V-2page61itm 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1455.83 1455.83 580.89 False None None False None False 845677.0887 0 3611158 131243 None V-2page59 itm9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 991.2 991.2 71.5 False None None False None False 70870.8 0 3611159 131243 None V-2page63 itm 9.32 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3199.1 3199.1 34.54 False None None False None False 110496.914 0 3611160 131243 None V-2page 4 itm 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 365.51 365.51 316.07 False None None False None False 115526.7457 0 3611161 131243 None V-2page 60 itm 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1101.47 1101.47 59.14 False None None False None False 65140.9358 0 3611162 131243 None V-2page65 itmv9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1795.31 1795.31 259.57 False None None False None False 466008.6167 0 3611163 131243 None V-2 page85 itm11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 700.04 700.04 357.82 False None None False None False 250488.3128 0 3611164 131243 None V-2 page 48itm 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 157.35 157.35 2741.14 False None None False None False 431318.379 0 3611165 131243 None V-2page 46itm8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 193.28 193.28 759.66 False None None False None False 146827.0848 0 3611166 131243 None V-2page47 itm8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 61.95 61.95 96.21 False None None False None False 5960.2095 0 3611167 131243 None V-2page48 itm 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 142.49 142.49 76.23 False None None False None False 10862.0127 0 3611168 131243 None V-2page47itm 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 65.67 65.67 179.6 False None None False None False 11794.332 0 3611169 131243 None 8.82 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 838.8 838.8 179.6 False None None False None False 150648.48 0 3611170 131243 None V-2page64itm 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2044.35 2044.35 17.32 False None None False None False 35408.142 0 3611171 131243 None V-2page77 itm 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5548.24 5548.24 5.25 False None None False None False 29128.26 0 3611172 131243 None 15.12 Newly Constructed Roof/Podium with PU Waterproof coating Above 500 m2. Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids 85%, Tensile strength 2 Mpa as per ASTM D 412, Elongation at break 400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness 55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo textile over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1443.44 1443.44 726.5 False None None False None False 1048659.16 0 3611173 131243 None V-2PAGE22 ITM 7.17 Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers over the existing purlins, rafters and trusses including cost of materials, labour, complete as per specifications ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 411.35 411.35 24.74 False None None False None False 10176.799 0 3611174 131243 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR PLINTH BEAM ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 94.35 False None None False None False 1199916.882 0 3611175 131243 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC BEAMS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 51.01 False None None False None False 691979.2156 0 3611176 131243 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC SLAB ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 115.4 False None None False None False 1467624.888 0 3611177 131243 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC STARICASE ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 7.07 False None None False None False 89914.2804 0 3611178 131243 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR LINTEL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 12.12 False None None False None False 164414.5872 0 3611179 131243 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11911.13 11911.13 14.18 False None None False None False 168899.8234 0 3611180 131243 None 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4317.92 4317.92 20.48 False None None False None False 88431.0016 0 3611181 131243 None 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 141.25 141.25 36.0 False None None False None False 5085.0 0 3611182 131243 None 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1642.91 1642.91 56.5 False None None False None False 92824.415 0 3611183 131243 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 30.54 False None None False None False 201606.4506 0 3611184 131243 None 10.1.2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4877.94 4877.94 9.69 False None None False None False 47267.2386 0 3611185 131243 None 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 761.99 761.99 92.01 False None None False None False 70110.6999 0 3611186 131243 None 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 350.64 350.64 215.82 False None None False None False 75675.1248 0 3611187 131243 None 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 68.92 False None None False None False 24849.106 0 3611188 131243 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3533.63 3533.63 11.09 False None None False None False 39187.9567 0 3611189 131243 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 13.73 False None None False None False 90637.0847 0 3611190 131243 None 10.1.1 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4963.43 4963.43 3.81 False None None False None False 18910.6683 0 3611191 131243 None 1.4.1 V-1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 11.06 False None None False None False 3316.2304 0 3611192 131243 None 1.4.2 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 320.9 320.9 1.7 False None None False None False 545.53 0 3611193 131243 None 17.5 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1391.4 1391.4 7.0 False None None False None False 9739.8 0 3611194 131243 None 17.1 V-2 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1241.48 1241.48 0.28 False None None False None False 347.6144 0 3611195 131243 None 17.2 V-2 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1469.45 1469.45 0.14 False None None False None False 205.723 0 3611196 131243 None 17. V-2 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1476.89 1476.89 0.14 False None None False None False 206.7646 0 3611197 131243 None 17.4 V-2 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1659.02 1659.02 0.14 False None None False None False 232.2628 0 3611198 131243 None 17.14 V-2 Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 @ 6kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1449.63 1449.63 1.0 False None None False None False 1449.63 0 3611199 131243 None V3 305.3.4 Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 130.1 130.1 60.0 False None None False None False 7806.0 0 3611200 131243 None V-3 4.2 Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 2922.8 2922.8 30.0 False None None False None False 87684.0 0 3611201 131243 None V3 6.1 ISSUE RATE Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 MPa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 6095.88 6095.88 20.0 False None None False None False 121917.6 0 3611202 131243 None V-3 6.2 ISSUE RATE Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11107.64 11107.64 40.0 False None None False None False 444305.6 0 3611203 131243 None V-3 8.10 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 105.32 105.32 15.0 False None None False None False 1579.8 0 3611204 131243 None V-3 Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 87.97 87.97 448.0 False None None False None False 39410.56 0 3611205 131243 None V-314621A Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 250 x 100 mm Kerb Stone ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 296.12 296.12 100.0 False None None False None False 29612.0 0 3611206 131243 None 2.1.4 V-1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7702.86 7702.86 1.2 False None None False None False 9243.432 0 3611207 131243 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9156.76 9156.76 6.48 False None None False None False 59335.8048 0 3611208 131243 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 459.67 459.67 192.0 False None None False None False 88256.64 0 3611209 131243 None 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 220.54 220.54 192.0 False None None False None False 42343.68 0 3611210 131243 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (FOR COMPOUND WALL) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8761.09 8761.09 9.36 False None None False None False 82003.8024 0 3611211 131243 None 8.20 V-3 Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 672.78 672.78 390.0 False None None False None False 262384.2 0 3611212 131243 None V1 1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Depth exceeding 1.5 m, but not exceeding 3 m FOR SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 526.58 526.58 22.51 False None None False None False 11853.3158 0 3611213 131243 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Raft for Water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8732.83 8732.83 4.32 False None None False None False 37725.8256 0 3611214 131243 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Outer wall water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9326.32 9326.32 5.89 False None None False None False 54932.0248 0 3611215 131243 None V2 15.14 UGT/OHT (inside) waterproofing with Antimicrobial CoatingProviding and Applying two component, waterbased food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 300 of US FDA, having mixing Ratio (Base: Hardener: Water) 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster, and that Item No. 4 is completed across the entire surface prior to applying the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2072.85 2072.85 36.6 False None None False None False 75866.31 0 3611216 131243 None V5 18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2430.92 2430.92 8.0 False None None False None False 19447.36 0 3611217 131243 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RC WALL FOR SEPTIC TANK ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 9.87 False None None False None False 142260.3567 0 3611218 131243 None 15.5 V-2 Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of 25 MPa (as per ASTM D 412), elongation of 500% (as per ASTM D 412), puncture resistance of 1000N (as per ASTM E 154), peel adhesion to concrete 1200N/m (as per ASTM D 903), hydrostatic head resistance 70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self adhesive polymer layer, etc, including surface preparation completely as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 749.6 749.6 63.57 False None None False None False 47652.072 0 3611219 131243 None 8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 110.27 110.27 20.1 False None None False None False 2216.427 0 3611220 131243 None V-5P140I12.4 Geophysical investigation of site for sinking Borewell for supplying drinking water to Habitation either through the Handpump, MWS or PWSS by vertical sounding by adopting veener sounding by adopting veener or schlumbergers's including reconassiance of survey of Geological formation,geophysical investigation of existing ground water in the vicinity quality, quantity and acceptability of the user including the location of site,recommended department of casing pipe required to seal the top and consolidated formation including an extra depth of 1.00Mtr in consolidated formation including an extra depth of drilling required to cover full depth of occupier proposed to trap probable yield and other information required including transportation of instrument and accessories to work site engaging technical personnel labour required etc complete as directed by Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6551.83 6551.83 1.0 False None None False None False 6551.83 0 3611221 131243 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 458.43 458.43 50.0 False None None False None False 22921.5 0 3611222 131243 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above 50 Mtrs and upto 100 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 574.9 574.9 50.0 False None None False None False 28745.0 0 3611223 131243 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above100 Mtrs. and upto 150 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 610.83 610.83 50.0 False None None False None False 30541.5 0 3611224 131243 None V-5P143I12.32 Supply Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2394.99 2394.99 20.0 False None None False None False 47899.8 0 3611225 131243 None V-5P155I13.28 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 681.45 681.45 150.0 False None None False None False 102217.5 0 3611226 131243 None V-5P143I12.33 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 1.0 False None None False None False 185.85 0 3611227 131243 None V-5P154I12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 203.2 203.2 1.0 False None None False None False 203.2 0 3611228 131243 None 18-19 SR13.81.3 Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 260.19 260.19 1.0 False None None False None False 260.19 0 3611229 131243 None V-5P154I13.11.5 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00" - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. 5.00 HP - 90 LPM @ 66 m = 10 STG Outlet Dia - 2.00" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39817.74 39817.74 1.0 False None None False None False 39817.74 0 3611230 131243 None V-5P155I13.23 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter Up to 6 HP - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11832.45 11832.45 1.0 False None None False None False 11832.45 0 3611231 131243 None V-5P155I13.29 Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets. complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1920.45 1920.45 1.0 False None None False None False 1920.45 0 3611232 131243 None V-5P155I13.31 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 49.56 49.56 100.0 False None None False None False 4956.0 0 3611233 131243 None V-5P156I13.32 Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job. as per specifications, with testing of as per instructions of engineer incharge of work - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 8053.5 8053.5 1.0 False None None False None False 8053.5 0 3611234 131243 None V-5P156I13.33 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 1672.65 1672.65 1.0 False None None False None False 1672.65 0 3611235 131243 None 2.6.2 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4 mm2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 208.15 208.15 165.0 False None None False None False 34344.75 0 3611236 131243 None V-5P20I5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour enameled metal paint etc., complete 16 SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 30000.0 False None None False None False 15900.0 0 3611237 131243 None V-5P21I5.44.4 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase /Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600mmx600mmx170mm. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17990.28 17990.28 1.0 False None None False None False 17990.28 0 3611238 131243 None 5.6.6 V-6 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20" x 2.5" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 404.08 404.08 1.0 False None None False None False 404.08 0 3611239 131243 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 1.0 False None None False None False 514.19 0 3611240 131243 None 13.18.1 Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15A to 63A TPST ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 344.44 344.44 1.0 False None None False None False 344.44 0 3611241 131243 None 5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 1.0 False None None False None False 594.72 0 3611242 131243 None 1.23 Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 3323.0 3323.0 164.36 False None None False None False 546168.28 0 3611243 131243 None V-2 13.50.5 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm dia pipes, From wash basin waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 376.66 376.66 50.0 False None None False None False 18833.0 0 3611244 131243 None V-2 13.50.6 Providing and fixing normal gauge polythene pipes of approved quality Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm dia pipes, From sink & urinal waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 478.25 478.25 20.0 False None None False None False 9565.0 0 3611245 131243 None V-2 13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 358.07 358.07 185.0 False None None False None False 66242.95 0 3611246 131243 None V-2 13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 477.02 477.02 120.0 False None None False None False 57242.4 0 3611247 131243 None V-2 IT.NO 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 244.08 244.08 35.0 False None None False None False 8542.8 0 3611248 131243 None V-2 IT.NO 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 50.0 False None None False None False 18027.5 0 3611249 131243 None V-2 P.NO 128 IT.NO 13.63 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 302.32 302.32 55.0 False None None False None False 16627.6 0 3611250 131243 None V-2 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1511.58 1511.58 21.0 False None None False None False 31743.18 0 3611251 131243 None V-2 P.NO 127 IT.NO 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6891.32 6891.32 4.0 False None None False None False 27565.28 0 3611252 131243 None V-2 P.NO 130 IT.NO 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 614.54 614.54 4.0 False None None False None False 2458.16 0 3611253 131243 None V-2 P.NO 123 IT.NO 14.38 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 179.66 179.66 4.0 False None None False None False 718.64 0 3611254 131243 None V-2 P.NO 178 IT.NO 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :: W.C. pan with ISI marked white solid plastic seat and lid" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7405.5 7405.5 9.0 False None None False None False 66649.5 0 3611255 131243 None V-2 P.NO 124 IT.NO14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6051.28 6051.28 10.0 False None None False None False 60512.8 0 3611256 131243 None V-2 P.NO 126 IT.NO 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6296.6 6296.6 2.0 False None None False None False 12593.2 0 3611257 131243 None V-2 P.NO 126 IT.NO 14.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (510x1040 mm bowl depth 250 mm)" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6960.7 6960.7 4.0 False None None False None False 27842.8 0 3611258 131243 None V-2 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 898.28 898.28 12.0 False None None False None False 10779.36 0 3611259 131243 None V-2 P.NO 124 IT.NO 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3818.6 3818.6 13.0 False None None False None False 49641.8 0 3611260 131243 None V-2 P.NO 120 IT.NO 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 382.85 382.85 90.0 False None None False None False 34456.5 0 3611261 131243 None V-2 P.NO 120 IT.NO 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 20 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 469.58 469.58 70.0 False None None False None False 32870.6 0 3611262 131243 None V-2 p.NO 120 IT.NO 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 25 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 70.0 False None None False None False 41370.0 0 3611263 131243 None V-2 P.NO 120 IT.NO 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 690.12 690.12 30.0 False None None False None False 20703.6 0 3611264 131243 None V-2 P.NO 120 IT.NO 13.31.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 664.1 664.1 20.0 False None None False None False 13282.0 0 3611265 131243 None V-2 P.NO 120IT.NO 13.31.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 967.66 967.66 20.0 False None None False None False 19353.2 0 3611266 131243 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 268.86 268.86 50.0 False None None False None False 13443.0 0 3611267 131243 None V-2 P.NO 120 IT.NO 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 366.74 366.74 50.0 False None None False None False 18337.0 0 3611268 131243 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 215.0 False None None False None False 127065.0 0 3611269 131243 None V-2 P.NO 120 IT.NO 13.33.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 65mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 1734.6 1734.6 25.0 False None None False None False 43365.0 0 3611270 131243 None V-2 P.NO 120 IT.NO 13.33.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 50mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 893.32 893.32 40.0 False None None False None False 35732.8 0 3611271 131243 None V2 13.5.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :" 25 mm nominal bore ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 411.35 411.35 12.0 False None None False None False 4936.2 0 3611272 131243 None V2-13.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 740.92 740.92 7.0 False None None False None False 5186.44 0 3611273 131243 None V-2 13.4.3 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 869.78 869.78 9.0 False None None False None False 7828.02 0 3611274 131243 None v2-13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1059.35 1059.35 2.0 False None None False None False 2118.7 0 3611275 131243 None V-2,A-13, IT.NO 13.2.1 Brass bib-cock 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 354.35 354.35 19.0 False None None False None False 6732.65 0 3611276 131243 None V-2 IT.NO 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Ltr 11.15 11.15 3000.0 False None None False None False 33450.0 0 3611277 131243 None V2 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 182.13 182.13 125.0 False None None False None False 22766.25 0 3611278 131243 None Market Rate Providing and fixing 7.50cms to 15cms dia N.P. Grating 100mm dia. (Page.91/I.No.12.111) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 177.0 177.0 55.0 False None None False None False 9735.0 0 3611279 131243 None Market Rate Air Vent Cowel 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 413.0 413.0 12.0 False None None False None False 4956.0 0 3611280 131243 None Market Rate Air Vent Cowel 110mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 590.0 590.0 12.0 False None None False None False 7080.0 0 3611281 131243 None Market Rate Supplying and fixing Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards with a single 15mm C.P. 32mm dia CP waste coupling, 32mmdia heavy duty CP bottle trap with extension pipe, CP wall flanges, 2 Nos.15mm dia C.P. angle cocks, 2nos.C.P. flexible inlet connection pipes, CI brackets etc., complete including silicon sealant filling. (Jaguar make or Equalent ) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6844.0 6844.0 9.0 False None None False None False 61596.0 0 3611282 131243 None Market Rate Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2183.0 2183.0 9.0 False None None False None False 19647.0 0 3611283 131243 None Market Rate Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 95.0 False None None False None False 72865.0 0 3611284 131243 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. a) 65mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4130.0 4130.0 2.0 False None None False None False 8260.0 0 3611285 131243 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. b) 50mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3304.0 3304.0 4.0 False None None False None False 13216.0 0 3611286 131243 None V2 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 345.68 345.68 4.0 False None None False None False 1382.72 0 3611287 131243 None V2 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5335.13 5335.13 18.0 False None None False None False 96032.34 0 3611288 131243 None V2 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with chase cutter and embed ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3455.57 3455.57 10.0 False None None False None False 34555.7 0 3611289 131243 None V2 13.28 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 79.3 79.3 70.0 False None None False None False 5551.0 0 3611290 131243 None 14.36.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 111.51 111.51 23.0 False None None False None False 2564.73 0 3611291 131243 None 14.37.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 379.13 379.13 23.0 False None None False None False 8719.99 0 3611292 131243 None 13.8.1.1 Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 102.84 102.84 23.0 False None None False None False 2365.32 0 3611293 131243 None 14.22.A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1003.59 1003.59 23.0 False None None False None False 23082.57 0 3611294 131243 None 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 768.18 768.18 53.0 False None None False None False 40713.54 0 3611295 131243 None V2 14.63A Providing and fixing Single lever sink mixer with swivel spout top outlet wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4667.31 4667.31 4.0 False None None False None False 18669.24 0 3611296 131243 None 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5518.51 5518.51 4.0 False None None False None False 22074.04 0 3611297 131243 None ELE 7.3 Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3 density Rock wool insulation with 22SWG Aluminium cladding." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 39372.94 39372.94 3.0 False None None False None False 118118.82 0 3611298 131243 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-110mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 944.0 944.0 10.0 False None None False None False 9440.0 0 3611299 131243 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-75mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 2.0 False None None False None False 1534.0 0 3611300 131243 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-160MM dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1298.0 1298.0 1.0 False None None False None False 1298.0 0 3611301 131243 None V-1,P.NO 6,IT.NO 1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 224.0 False None None False None False 67164.16 0 3611302 131243 None V-1 P.NO 7 IT.NO 1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 536.49 536.49 224.0 False None None False None False 120173.76 0 3611303 131243 None V-5 P.NO 134 IT.NO 10.3 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete. for:" Pipes of SN8 Self Fit - 160mm dia. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 764.46 764.46 300.0 False None None False None False 229338.0 0 3611304 131243 None V-5 P.NO 134 IT.NO 10.2.4 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:( For external Rain water Work ). - do - 160 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 713.66 713.66 70.0 False None None False None False 49956.2 0 3611305 131243 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 45.0 False None None False None False 304087.95 0 3611306 131243 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CATCH BASIN) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 15.0 False None None False None False 101362.65 0 3611307 131243 None 13.39 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3197.86 3197.86 25.0 False None None False None False 79946.5 0 3611308 131243 None 16.18 Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting and using of sight rails and boning rods wherever necessary, shoring and strutting wherever required using Ordinary Port Land Cement, using 1:1.5:3 proportion RCC with 20 mm and down graded jelly, well graded sand and steel of approved quality, 200 mm thick top concrete slab, having wall thickness and raft thickness as in approved drawings and with an offset in raft alround the chamber as in approved drawing, benching concrete with 1:6 slope towards the central drain finished smooth, including fixing and grouting of pipes, including conveying to work spot supply and fixing SFRC Machinehole cover and frame (Heavy duty) conforming to IS:12592 with latest amendments, on a bed of CC 1:2:4 Providing and fixing of minimum 3 mm thick encapsulated plastic footsteps (as per IS 10910) on 12 mm dia. Grade Fe-500 steel bar (as per IS 1786) staggered at 300 mm apart as detailed in Technical specifications, including stone grit beding wherever required, watering, curing, engraving Machinehole number with flow direction on the inner cylindrical surface etc., complete including cost of reinforcement steel and fabrication charges and also cost and conveyance of all materials, labour with all lead and lifts. The Pre-cast RCC Machinehole are for various diamters and depths as stated below and as per detailed drawings, specifications and direction of the Engineer. For 1.2m dia Machinehole:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 97246.63 97246.63 1.0 False None None False None False 97246.63 0 3611309 131243 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 80.0 False None None False None False 47280.0 0 3611310 131243 None 13.23 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (50 mm nominal bore, 242mm long, weighing not less than 1240 g) T. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1665.22 1665.22 5.0 False None None False None False 8326.1 0 3611311 131243 None 13.40.1 V-5 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. (pump room collection sump pumps) (2 HP, Size 65x50 Head 13M, Discharge 462 LPM) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19340.79 19340.79 2.0 False None None False None False 38681.58 0 3611312 131243 None 13.32 V-5 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 8053.5 8053.5 2.0 False None None False None False 16107.0 0 3611313 131243 None PWD ELE SR V-6 IT.NO 2.2.1 WIRES & CABLES Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 333.29 333.29 25.0 False None None False None False 8332.25 0 3611314 131243 None PWD ELE SR V-10 IT.NO 2.2.2 Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Pack 469.58 469.58 36.0 False None None False None False 16904.88 0 3611315 131243 None PWD ELE SR V-11 IT.NO 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 687.65 687.65 63.0 False None None False None False 43321.95 0 3611316 131243 None PWD ELE SR V-12 IT.NO 2.2.4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 838.8 838.8 8.0 False None None False None False 6710.4 0 3611317 131243 None PWD ELE SR V-14 IT.NO 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 170.98 170.98 25.0 False None None False None False 4274.5 0 3611318 131243 None PWD ELE SR V-15 IT.NO 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 197.0 197.0 32.0 False None None False None False 6304.0 0 3611319 131243 None PWD ELE SR V-16 IT.NO 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 219.3 219.3 16.0 False None None False None False 3508.8 0 3611320 131243 None PWD ELE SR V-17 IT.NO 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 272.58 272.58 7.0 False None None False None False 1908.06 0 3611321 131243 None PWD ELE SR V-18 IT.NO 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 323.38 323.38 20.0 False None None False None False 6467.6 0 3611322 131243 None PWD ELE SR V-20 IT.NO 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 199.48 199.48 32.0 False None None False None False 6383.36 0 3611323 131243 None PWD ELE SR V-21 IT.NO 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 216.83 216.83 16.0 False None None False None False 3469.28 0 3611324 131243 None PWD ELE SR V-22 IT.NO 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 289.93 289.93 7.0 False None None False None False 2029.51 0 3611325 131243 None PWD ELE SR V-23 IT.NO 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 351.88 351.88 21.0 False None None False None False 7389.48 0 3611326 131243 None PWD ELE SR V-24 IT.NO 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 426.22 426.22 31.0 False None None False None False 13212.82 0 3611327 131243 None PWD ELE SR V-26 IT.NO 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 126.38 126.38 217.0 False None None False None False 27424.46 0 3611328 131243 None PWD ELE SR V-6 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 205.67 205.67 2.0 False None None False None False 411.34 0 3611329 131243 None PWD ELE SR V-6,IT.NO 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 211.87 211.87 81.0 False None None False None False 17161.47 0 3611330 131243 None PWD ELE SR V-6,IT.NO 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 442.32 442.32 24.0 False None None False None False 10615.68 0 3611331 131243 None PWD ELE SR V-6,IT.NO 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 223.02 223.02 10.0 False None None False None False 2230.2 0 3611332 131243 None PWD ELE SR V-6, IT.NO 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 403.91 403.91 15.0 False None None False None False 6058.65 0 3611333 131243 None PWD ELE SR V-6,IT.NO 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 292.4 292.4 25.0 False None None False None False 7310.0 0 3611334 131243 None PWD ELE SR V-6,IT.NO 1.13 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 144.96 144.96 24.0 False None None False None False 3479.04 0 3611335 131243 None PWD ELE SR V-6,IT.NO-1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 81.77 81.77 890.0 False None None False None False 72775.3 0 3611336 131243 None PWD ELE SR V-6,IT.NO 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 96.64 96.64 1030.0 False None None False None False 99539.2 0 3611337 131243 None PWD ELE SR V-6, IT.NO .2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 127.62 127.62 250.0 False None None False None False 31905.0 0 3611338 131243 None PWD ELE SR V-6,IT.NO1.3.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 84.25 84.25 445.0 False None None False None False 37491.25 0 3611339 131243 None PWD ELE SR V-6,IT.NO-1.3.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 97.88 97.88 515.0 False None None False None False 50408.2 0 3611340 131243 None PWD ELE SR V-6,IT.NO-1.3.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 122.66 122.66 150.0 False None None False None False 18399.0 0 3611341 131243 None PWD ELE SR V-6,IT.NO 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 32.21 32.21 470.0 False None None False None False 15138.7 0 3611342 131243 None PWD ELE SR V-6,IT.NO 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 52.04 52.04 1530.0 False None None False None False 79621.2 0 3611343 131243 None PWD ELE SR V-6,IT.NO 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 78.06 78.06 740.0 False None None False None False 57764.4 0 3611344 131243 None PWD ELE SR V-6,IT.NO 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 113.99 113.99 580.0 False None None False None False 66114.2 0 3611345 131243 None PWD ELE SR V-6,IT.NO 5.19.11 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5003.08 5003.08 2.0 False None None False None False 10006.16 0 3611346 131243 None PWD ELE SR V-6,IT.NO 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 6-32Amps SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 62.0 False None None False None False 31879.78 0 3611347 131243 None PWD ELE SR V-6 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 40Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3771.52 3771.52 2.0 False None None False None False 7543.04 0 3611348 131243 None PWD ELE SR V-6,IT.NO 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5299.2 5299.2 2.0 False None None False None False 10598.4 0 3611349 131243 None PWD ELE SR V-6,IT.NO 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 480.73 480.73 10.0 False None None False None False 4807.3 0 3611350 131243 None PWD ELE SR V-6,IT.NO 6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39.65 39.65 16.0 False None None False None False 634.4 0 3611351 131243 None V-6 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4348.89 4348.89 7.0 False None None False None False 30442.23 0 3611352 131243 None V-6 12.58.2 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 101.6 101.6 100.0 False None None False None False 10160.0 0 3611353 131243 None 12.58.6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600X600X3 GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1084.13 1084.13 6.0 False None None False None False 6504.78 0 3611354 131243 None 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10 12W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1096.52 1096.52 19.0 False None None False None False 20833.88 0 3611355 131243 None 11.5.3 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1640.44 1640.44 5.0 False None None False None False 8202.2 0 3611356 131243 None 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 854.91 854.91 51.0 False None None False None False 43600.41 0 3611357 131243 None 11.11.3 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 184.61 184.61 15.0 False None None False None False 2769.15 0 3611358 131243 None PWD ELE SR V-6,IT.NO 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1848.59 1848.59 13.0 False None None False None False 24031.67 0 3611359 131243 None PWD ELE SR V-6,IT.NO 6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3316.8 3316.8 24.0 False None None False None False 79603.2 0 3611360 131243 None PWD ELE SR V-6,IT.NO 13.11 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 390.29 390.29 24.0 False None None False None False 9366.96 0 3611361 131243 None PWD ELE SR V-6,IT.NO 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 151.16 151.16 83.0 False None None False None False 12546.28 0 3611362 131243 None PWD ELE SR V-6,IT.NO 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 875.97 875.97 13.0 False None None False None False 11387.61 0 3611363 131243 None PWD ELE SR V-6,IT.NO 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 200.72 200.72 3.0 False None None False None False 602.16 0 3611364 131243 None PWD ELE SR V-6,IT.NO 5.42.1 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 86000.0 False None None False None False 45580.0 0 3611365 131243 None PWD ELE SR V-6,IT.NO 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 5.0 False None None False None False 21279.85 0 3611366 131243 None PWD ELE SR V-6,IT.NO 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 10.0 False None None False None False 3779.0 0 3611367 131243 None PWD ELE SR V-6,IT.NO 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 10.0 False None None False None False 9366.8 0 3611368 131243 None PWD ELE SR V-6,IT.NO 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) 100Amps 25kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 10515.39 10515.39 1.0 False None None False None False 10515.39 0 3611369 131243 None PWD ELE SR V-6,iT.NO 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps DP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 10.0 False None None False None False 38260.3 0 3611370 131243 None PWD ELE SR V-6,IT.NO 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11541.29 11541.29 1.0 False None None False None False 11541.29 0 3611371 131243 None PWD ELE SR V-6,IT.NO 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3611372 131243 None PWD ELE SR V-6,IT.NO 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 696.32 696.32 3.0 False None None False None False 2088.96 0 3611373 131243 None PWD ELE SR V-6,IT.NO5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 15.0 False None None False None False 8920.8 0 3611374 131243 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way SP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2885.63 2885.63 2.0 False None None False None False 5771.26 0 3611375 131243 None 5.19.12 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6120.66 6120.66 1.0 False None None False None False 6120.66 0 3611376 131243 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 1.0 False None None False None False 3826.03 0 3611377 131243 None 5.20.8 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6377.13 6377.13 3.0 False None None False None False 19131.39 0 3611378 131243 None 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 109549.9 109549.9 0.1 False None None False None False 10954.99 0 3611379 131243 None 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 35 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 190882.82 190882.82 0.05 False None None False None False 9544.141 0 3611380 131243 None 32.13 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 70 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 393892.97 393892.97 0.1 False None None False None False 39389.297 0 3611381 131243 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.05 False None None False None False 1293.8875 0 3611382 131243 None 31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 38581.22 38581.22 0.2 False None None False None False 7716.244 0 3611383 131243 None 6.17.6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 15.41 15.41 20.0 False None None False None False 308.2 0 3611384 131243 None 16.17.10 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 70 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 148.68 148.68 16.0 False None None False None False 2378.88 0 3611385 131243 None 11.11.5 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 333.29 333.29 9.0 False None None False None False 2999.61 0 3611386 131243 None 11.6.3 Supplying of recess mounting non integral type .LED . W luminaire comprising of pressure decastextruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' 34 36watt ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5641.17 5641.17 8.0 False None None False None False 45129.36 0 3611387 131243 None 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4985.74 4985.74 2.0 False None None False None False 9971.48 0 3611388 131243 None 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1810.18 1810.18 3.0 False None None False None False 5430.54 0 3611389 131243 None 5.14.1 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 2738.19 2738.19 2.0 False None None False None False 5476.38 0 3611390 131243 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 169.74 169.74 24.0 False None None False None False 4073.76 0 3611391 131243 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 395.24 395.24 31.0 False None None False None False 12252.44 0 3611392 131243 None 2.2.5 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 1225.37 1225.37 4.0 False None None False None False 4901.48 0 3611393 131243 None 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 144.96 144.96 6.0 False None None False None False 869.76 0 3611394 131243 None 12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 78.06 78.06 21.0 False None None False None False 1639.26 0 3611395 131243 None 3.6.11 TV/Telephone socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 193.28 193.28 2.0 False None None False None False 386.56 0 3611396 131243 None 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 304.79 304.79 1.0 False None None False None False 304.79 0 3611397 131243 None 32.02 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 2 core 10 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 98168.45 98168.45 0.1 False None None False None False 9816.845 0 3611398 131243 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.1 False None None False None False 2587.775 0 3611399 131243 None pwd sr Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 15.41 15.41 15.0 False None None False None False 231.15 0 3611400 131243 None 11..11.7 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500-degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 527.81 527.81 3.0 False None None False None False 1583.43 0 3611401 131243 None 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 64.43 64.43 2.0 False None None False None False 128.86 0 3611402 131243 None 11.8.1 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 25watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3004.58 3004.58 1.0 False None None False None False 3004.58 0 3611403 131243 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers32Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 298.6 298.6 1.0 False None None False None False 298.6 0 3611404 131243 None 5.30 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1709.82 1709.82 1.0 False None None False None False 1709.82 0 3611405 131243 None 7.1.3 Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting.25Litres ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 12689.84 12689.84 1.0 False None None False None False 12689.84 0 3611406 131243 None PWD SR 2023-24 Volume 6 It No-9.3.3 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. 5 kVA ON LINE UPS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 84726.54 84726.54 1.0 False None None False None False 84726.54 0 3611407 131243 None PWD SR 2023-24 Volume 6 It No-9.5.9 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150AH capacity ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19693.91 19693.91 4.0 False None None False None False 78775.64 0 3611408 131243 None A.R Item Name : The Tenderer (agency) should arrange to obtain (get), detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration &proof checking by reputedGovernment/Semi Government/IISC /IIT/NIT/or as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, 3D view, MFP design and Drawings, Internal and External Electrical services including electrical infrastructure, etc. Interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project and 6 sets of as built drawings should be submitted to the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 300000.0 300000.0 1.0 False None None False None False 300000.0 0 3611409 131243 None LQR IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),30M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 23836.0 23836.0 4.0 False None None False None False 95344.0 0 3611410 131243 None LQR IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),60M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 25606.0 25606.0 2.0 False None None False None False 51212.0 0 3611411 131243 None LQR Supplying, installation, testing and commissioning of SITC of complete 8 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up to 16 channels),internal storage supports 8HDDs expandable up to 64TB (8TB each),operating temperatures(-10 degree C) and (55 degree C),UL,CE,FCC. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3611412 131243 None LQR Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17110.0 17110.0 2.0 False None None False None False 34220.0 0 3611413 131243 None LQR Supply and Installation of I/Os ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 147.5 147.5 12.0 False None None False None False 1770.0 0 3611414 131243 None LQR Supply and Installation of 2 Mtrs Patch Chord The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 265.5 265.5 12.0 False None None False None False 3186.0 0 3611415 131243 None LQR Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 336.3 336.3 6.0 False None None False None False 2017.8 0 3611416 131243 None LQR Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3611417 131243 None V-6 8.1 Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 600.0 False None None False None False 28248.0 0 3611418 131243 None 1.2.2 Supplying heavy gauge PVC Consealed conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 96.64 96.64 500.0 False None None False None False 48320.0 0 3611419 131243 None 8.12.3 Supplying & Fixing of Patch panel for LAN cabling .16 Port 10/100 patch panel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3778.95 3778.95 1.0 False None None False None False 3778.95 0 3611420 131243 None 8.4.1 v-6 Supplying & Fixing of switch mounting rack with power manager & Cable manager 4U with 450mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6061.19 6061.19 1.0 False None None False None False 6061.19 0 3611421 131243 None 1.01 Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 8767.16 8767.16 8.0 False None None False None False 70137.28 0 3611422 131243 None 2.02 Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1379.01 1379.01 8.0 False None None False None False 11032.08 0 3611423 131243 None 6.05 Supply of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 107.79 107.79 6.0 False None None False None False 646.74 0 3611424 131243 None 13.12 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 6.0 False None None False None False 356.82 0 3611425 131243 None 2.16 Supply of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 296.12 296.12 11.0 False None None False None False 3257.32 0 3611426 131243 None 2.16 Erection of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 115.23 115.23 11.0 False None None False None False 1267.53 0 3611427 131243 None 68.17 Supply and fixing of Caution/Danger Board ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 185.85 185.85 6.0 False None None False None False 1115.1 0 3611428 131243 None 4.02 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 110.27 110.27 8.0 False None None False None False 882.16 0 3611429 131243 None 5.09 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 52.04 52.04 8.0 False None None False None False 416.32 0 3611430 131243 None 24.05 Supply and fixing of 11 kV, 400 Amps Double Break GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 26341.14 26341.14 1.0 False None None False None False 26341.14 0 3611431 131243 None 24.07 Supply and fixing of H-Frame for mounting GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7521.97 7521.97 1.0 False None None False None False 7521.97 0 3611432 131243 None 25.01 Supply of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 7279.13 7279.13 1.0 False None None False None False 7279.13 0 3611433 131243 None 13.01 Erection of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 293.64 293.64 1.0 False None None False None False 293.64 0 3611434 131243 None 13.07 Supply, erection, testing and commissioning of 63 KVA 5Star rated Aluminium wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, , oil level indicator with + 5% to -10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 210958.34 210958.34 1.0 False None None False None False 210958.34 0 3611435 131243 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 4348.89 4348.89 8.0 False None None False None False 34791.12 0 3611436 131243 None 12.58.3 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work MT 158.59 158.59 100.0 False None None False None False 15859.0 0 3611437 131243 None 12.58.9 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2035.68 2035.68 100.0 False None None False None False 203568.0 0 3611438 131243 None 12.58.11 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 9194.62 9194.62 10.0 False None None False None False 91946.2 0 3611439 131243 None 45.07 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Outdoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 5039.01 5039.01 4.0 False None None False None False 20156.04 0 3611440 131243 None 45.04 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Indoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 3887.98 3887.98 2.0 False None None False None False 7775.96 0 3611441 131243 None 36.01 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 1102296.17 1102296.17 0.1 False None None False None False 110229.617 0 3611442 131243 None 38. Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1222.89 1222.89 150.0 False None None False None False 183433.5 0 3611443 131243 None 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 176000.0 False None None False None False 93280.0 0 3611444 131243 None 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 6.0 False None None False None False 25535.82 0 3611445 131243 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 12.0 False None None False None False 4534.8 0 3611446 131243 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 12.0 False None None False None False 11240.16 0 3611447 131243 None 5.15.15 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 250Amps 35kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 29172.26 29172.26 1.0 False None None False None False 29172.26 0 3611448 131243 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3611449 131243 None 10.1.3 Supplying, installing, testing and commissioning of 25KVA/20kw Diesel Generator set(CPCB-4) with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 Generator set specificationsEngine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have + 1.0 % Voltage regulation (max) in static conditions- IP: 23 protections with insulation class H. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lamps for ‘Load On’ and ‘Set Running’, Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections. Genset Controller: microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface, Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory, Provide Alternator Data. Voltage (1 ph or 3 ph line to line and line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph and total), Frequency, Provide Engine Data, Starting battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Meter calibration, Engine controls, Power Start operates on 12 VDC batteries,- Auto start mode accepts a ground signal from remote devices to automatically start the DG set. The remote start will also wake up the control system from sleep mode. Acoustic enclosure: The acoustic enclosure shall be made of 1.6 mm thick CRCA sheets in suitable approved shade and a structural/ sheet metal base frame painted in black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75dBA at 1 mtr sound levels specified by Ministry of Environment & Forest. The enclosure has the following features: Specially designed to meet stringent MOEF/ CPCB norms of 75dBA @ 1mtr at 75% load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 558914.14 558914.14 1.0 False None None False None False 558914.14 0 3611450 131243 None 10.2.2 Supply, Erection, testing and commissioning of AMF panel suitable for .KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .amps 4 pole contactor for alternator with thermal O/L relay,. Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and flat/Boost facility. 25 KVA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 72742.93 72742.93 1.0 False None None False None False 72742.93 0 3611451 131243 None A.R Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 3540.0 3540.0 5.0 False None None False None False 17700.0 0 3611452 131243 None A.R Supply and laying of 2Cx2.5SQ MM and 6CX2.5 SQ MM Sheilded Sensor and control Cables ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 236.0 236.0 50.0 False None None False None False 11800.0 0 3611453 131243 None 58.02 LT Metering Cubicle at Low Tension for 50KW to 150KW having specification and design as per the prototype approval (Excluding Meter cost and modem cost) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 98973.8 98973.8 1.0 False None None False None False 98973.8 0 3611454 131243 None 53.01 CT PT Operated ETV Meter 0.2s Accuracy class with ABT feature and DLMS protocal with ToD with RS232 Port UNIDIRACTIONAL ( Used for HT Installation, LT Metering Cubicle (50-150KW) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 24302.99 24302.99 1.0 False None None False None False 24302.99 0 3611455 131243 None 10.01 Supply and fixing of PG Clamps for Rabbit Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 173.46 173.46 15.0 False None None False None False 2601.9 0 3611456 131243 None v-6 2.02 Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 603.39 603.39 6.0 False None None False None False 3620.34 0 3611457 131243 None v-6 2.02 Erection of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 318.42 318.42 6.0 False None None False None False 1910.52 0 3611458 131243 None v-6 6.06 Supply and fixing of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 254.0 254.0 18.0 False None None False None False 4572.0 0 3611459 131243 None v-6 6.10 Supply and fixing of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 235.45 235.45 18.0 False None None False None False 4238.1 0 3611460 131243 None 13.12 v-6 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 18.0 False None None False None False 1070.46 0 3611461 131243 None v-6 6.08 Supply and fixing of 15 Strain Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 73.1 73.1 4.0 False None None False None False 292.4 0 3611462 131243 None 7.02 Supply of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 57283.93 57283.93 1.0 False None None False None False 57283.93 0 3611463 131243 None 6.02 V-6 Erection of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 5403.28 5403.28 1.0 False None None False None False 5403.28 0 1721828234000 0 None None Buildings NARAYANPUR IN SHORAPUR TALUK OF YADGIR DISTRICT (CIVIL WORKS) 27725914.4 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3611464 131244 None CSR:V-3 PAGE NO 9 Itm 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work 100 Sqm 486.93 486.93 17.49 False None None False None False 8516.4057 0 3611465 131244 None V-1 page 8 itm 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 117.71 117.71 768.64 False None None False None False 90476.6144 0 3611466 131244 None V-1page 8 itm 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 126.38 126.38 809.88 False None None False None False 102352.6344 0 3611467 131244 None V-1page 8 itm 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 449.76 449.76 583.66 False None None False None False 262506.9216 0 3611468 131244 None V-3page 3 A Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 167.27 167.27 225.13 False None None False None False 37657.4951 0 3611469 131244 None V-2page5 itm 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 146.2 146.2 774.16 False None None False None False 113182.192 0 3611470 131244 None V-1pg7 itm1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 329.57 329.57 305.66 False None None False None False 100736.3662 0 3611471 131244 None V-1page7vitm1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 587.29 587.29 1082.02 False None None False None False 635459.5258 0 3611472 131244 None V-1page 15 itm2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7420.37 7420.37 161.37 False None None False None False 1197425.1069 0 3611473 131244 None V-1page15 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR FOOTING ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8478.33 8478.33 177.95 False None None False None False 1508718.8235 0 3611474 131244 None V-1page16 itm 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. ) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatess FOR PEDESTAL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8635.33 8635.33 13.4 False None None False None False 115713.422 0 3611475 131244 None V-1page15itm 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR COLUMNS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 52.43 False None None False None False 755695.0863 0 3611476 131244 None V-3page135itm15.4 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 252.76 252.76 13.0 False None None False None False 3285.88 0 3611477 131244 None V-2page55 itm 8.16.a Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1533.88 1533.88 13.81 False None None False None False 21182.8828 0 3611478 131244 None V-1page18itm2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. - Buildings ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Tonne 110837.22 110837.22 50.48 False None None False None False 5595062.8656 0 3611479 131244 None 18-19SR ITM4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No KBS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 38.94 38.94 145.02 False None None False None False 5647.0788 0 3611480 131244 None DATA RATE Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 86.14 86.14 145.02 False None None False None False 12492.0228 0 3611481 131244 None V-2PAGE 9 ITM5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7915.97 7915.97 8.76 False None None False None False 69343.8972 0 3611482 131244 None V-2PAGE 14 ITM 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1623.09 1623.09 1313.93 False None None False None False 2132626.6437 0 3611483 131244 None V-2page 14 itm 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1367.86 1367.86 171.24 False None None False None False 234232.3464 0 3611484 131244 None V-2 page100 itm 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 122431.79 122431.79 1.2 False None None False None False 146918.148 0 3611485 131244 None V-2 page 105 itm 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1258.82 1258.82 32.0 False None None False None False 40282.24 0 3611486 131244 None 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 681.45 681.45 64.0 False None None False None False 43612.8 0 3611487 131244 None 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 464.63 464.63 32.0 False None None False None False 14868.16 0 3611488 131244 None 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 64.0 False None None False None False 11894.4 0 3611489 131244 None 22.15.9 PProviding and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 86.73 86.73 128.0 False None None False None False 11101.44 0 3611490 131244 None 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 123.9 123.9 32.0 False None None False None False 3964.8 0 3611491 131244 None 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 1303.43 1303.43 32.0 False None None False None False 41709.76 0 3611492 131244 None V-2page69 itm 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 74.34 74.34 192.0 False None None False None False 14273.28 0 3611493 131244 None 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 168.45 False None None False None False 10853.2335 0 3611494 131244 None V-2page105 itm 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4115.96 4115.96 74.84 False None None False None False 308038.4464 0 3611495 131244 None V-2page109 itm 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 8343.43 8343.43 69.39 False None None False None False 578950.6077 0 3611496 131244 None V-2page109 itm 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 7085.84 7085.84 6.84 False None None False None False 48467.1456 0 3611497 131244 None V-2page 86itm11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 208.15 208.15 1600.83 False None None False None False 333212.7645 0 3611498 131244 None V-2page 111itm 12.93.1 Providing and fixing factory made single extruded WPC (WoodPolymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Size 62 x 100mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work m 869.78 869.78 64.35 False None None False None False 55970.343 0 3611499 131244 None V-2page84 itm 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kgs 168.5 168.5 1724.91 False None None False None False 290647.335 0 3611500 131244 None V-2page 41itm 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 386.57 386.57 1763.82 False None None False None False 681839.8974 0 3611501 131244 None V-2page 43 itm 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 261.43 261.43 1176.83 False None None False None False 307658.6669 0 3611502 131244 None V-2page50 itm 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 123.9 123.9 2919.03 False None None False None False 361667.817 0 3611503 131244 None V-2page42itm 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 432.41 432.41 975.48 False None None False None False 421807.3068 0 3611504 131244 None V-2page41 itm 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 438.61 438.61 163.05 False None None False None False 71515.3605 0 3611505 131244 None 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 2013.85 False None None False None False 94812.058 0 3611506 131244 None 10.5.2 Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 254.88 254.88 13.0 False None None False None False 3313.44 0 3611507 131244 None V-2page 54itm 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 64.43 64.43 628.05 False None None False None False 40465.2615 0 3611508 131244 None V-2page61itm 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1455.83 1455.83 580.89 False None None False None False 845677.0887 0 3611509 131244 None V-2page59 itm9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 991.2 991.2 71.5 False None None False None False 70870.8 0 3611510 131244 None V-2page63 itm 9.32 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3199.1 3199.1 34.54 False None None False None False 110496.914 0 3611511 131244 None V-2page 4 itm 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 365.51 365.51 316.07 False None None False None False 115526.7457 0 3611512 131244 None V-2page 60 itm 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1101.47 1101.47 59.14 False None None False None False 65140.9358 0 3611513 131244 None V-2page65 itmv9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1795.31 1795.31 259.57 False None None False None False 466008.6167 0 3611514 131244 None V-2 page85 itm11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 700.04 700.04 357.82 False None None False None False 250488.3128 0 3611515 131244 None V-2 page 48itm 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 157.35 157.35 2741.14 False None None False None False 431318.379 0 3611516 131244 None V-2page 46itm8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 193.28 193.28 759.66 False None None False None False 146827.0848 0 3611517 131244 None V-2page47 itm8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 61.95 61.95 96.21 False None None False None False 5960.2095 0 3611518 131244 None V-2page48 itm 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 142.49 142.49 76.23 False None None False None False 10862.0127 0 3611519 131244 None V-2page47itm 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 65.67 65.67 179.6 False None None False None False 11794.332 0 3611520 131244 None 8.82 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 838.8 838.8 179.6 False None None False None False 150648.48 0 3611521 131244 None V-2page64itm 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2044.35 2044.35 17.32 False None None False None False 35408.142 0 3611522 131244 None V-2page77 itm 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5548.24 5548.24 5.25 False None None False None False 29128.26 0 3611523 131244 None 15.12 Newly Constructed Roof/Podium with PU Waterproof coating Above 500 m2. Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids 85%, Tensile strength 2 Mpa as per ASTM D 412, Elongation at break 400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness 55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo textile over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1443.44 1443.44 726.5 False None None False None False 1048659.16 0 3611524 131244 None V-2PAGE22 ITM 7.17 Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers over the existing purlins, rafters and trusses including cost of materials, labour, complete as per specifications ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 411.35 411.35 24.74 False None None False None False 10176.799 0 3611525 131244 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR PLINTH BEAM ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 102.35 False None None False None False 1301658.642 0 3611526 131244 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC BEAMS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 51.01 False None None False None False 691979.2156 0 3611527 131244 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC SLAB ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 115.4 False None None False None False 1467624.888 0 3611528 131244 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR RCC STARICASE ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 12717.72 12717.72 7.07 False None None False None False 89914.2804 0 3611529 131244 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOR LINTEL ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 13565.56 13565.56 12.12 False None None False None False 164414.5872 0 3611530 131244 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11911.13 11911.13 14.18 False None None False None False 168899.8234 0 3611531 131244 None 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4317.92 4317.92 20.48 False None None False None False 88431.0016 0 3611532 131244 None 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 141.25 141.25 36.0 False None None False None False 5085.0 0 3611533 131244 None 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1642.91 1642.91 56.5 False None None False None False 92824.415 0 3611534 131244 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 30.54 False None None False None False 201606.4506 0 3611535 131244 None 10.1.2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4877.94 4877.94 9.69 False None None False None False 47267.2386 0 3611536 131244 None 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 761.99 761.99 92.01 False None None False None False 70110.6999 0 3611537 131244 None 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 350.64 350.64 215.82 False None None False None False 75675.1248 0 3611538 131244 None 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 68.92 False None None False None False 24849.106 0 3611539 131244 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3533.63 3533.63 11.09 False None None False None False 39187.9567 0 3611540 131244 None 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 6601.39 6601.39 13.73 False None None False None False 90637.0847 0 3611541 131244 None 10.1.1 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 4963.43 4963.43 3.81 False None None False None False 18910.6683 0 3611542 131244 None 1.4.1 V-1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 11.06 False None None False None False 3316.2304 0 3611543 131244 None 1.4.2 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 320.9 320.9 1.7 False None None False None False 545.53 0 3611544 131244 None 17.5 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1391.4 1391.4 7.0 False None None False None False 9739.8 0 3611545 131244 None 17.1 V-2 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1241.48 1241.48 0.28 False None None False None False 347.6144 0 3611546 131244 None 17.2 V-2 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1469.45 1469.45 0.14 False None None False None False 205.723 0 3611547 131244 None 17. V-2 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1476.89 1476.89 0.14 False None None False None False 206.7646 0 3611548 131244 None 17.4 V-2 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 1659.02 1659.02 0.14 False None None False None False 232.2628 0 3611549 131244 None 17.14 V-2 Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 @ 6kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1449.63 1449.63 1.0 False None None False None False 1449.63 0 3611550 131244 None V3 305.3.4 Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 130.1 130.1 72.0 False None None False None False 9367.2 0 3611551 131244 None V-3 4.2 Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 2922.8 2922.8 36.0 False None None False None False 105220.8 0 3611552 131244 None V3 6.1 ISSUE RATE Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 MPa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 6095.88 6095.88 24.0 False None None False None False 146301.12 0 3611553 131244 None V-3 6.2 ISSUE RATE Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 11107.64 11107.64 48.0 False None None False None False 533166.72 0 3611554 131244 None V-3 8.10 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 105.32 105.32 15.0 False None None False None False 1579.8 0 3611555 131244 None V-3 Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 87.97 87.97 448.0 False None None False None False 39410.56 0 3611556 131244 None V-314621A Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 250 x 100 mm Kerb Stone ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 296.12 296.12 150.0 False None None False None False 44418.0 0 3611557 131244 None 2.1.4 V-1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 7702.86 7702.86 2.0 False None None False None False 15405.72 0 3611558 131244 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9156.76 9156.76 10.8 False None None False None False 98893.008 0 3611559 131244 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 459.67 459.67 320.0 False None None False None False 147094.4 0 3611560 131244 None 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 220.54 220.54 320.0 False None None False None False 70572.8 0 3611561 131244 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (FOR COMPOUND WALL) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8761.09 8761.09 9.36 False None None False None False 82003.8024 0 3611562 131244 None 8.20 V-3 Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 672.78 672.78 390.0 False None None False None False 262384.2 0 3611563 131244 None V1 1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Depth exceeding 1.5 m, but not exceeding 3 m FOR SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 526.58 526.58 22.51 False None None False None False 11853.3158 0 3611564 131244 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Raft for Water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 8732.83 8732.83 4.32 False None None False None False 37725.8256 0 3611565 131244 None 2.5.2 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Outer wall water tank ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 9326.32 9326.32 5.89 False None None False None False 54932.0248 0 3611566 131244 None V2 15.14 UGT/OHT (inside) waterproofing with Antimicrobial CoatingProviding and Applying two component, waterbased food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 300 of US FDA, having mixing Ratio (Base: Hardener: Water) 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster, and that Item No. 4 is completed across the entire surface prior to applying the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 2072.85 2072.85 36.6 False None None False None False 75866.31 0 3611567 131244 None V5 18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. SUMP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2430.92 2430.92 8.0 False None None False None False 19447.36 0 3611568 131244 None 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RC WALL FOR SEPTIC TANK ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 14413.41 14413.41 9.87 False None None False None False 142260.3567 0 3611569 131244 None 15.5 V-2 Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of 25 MPa (as per ASTM D 412), elongation of 500% (as per ASTM D 412), puncture resistance of 1000N (as per ASTM E 154), peel adhesion to concrete 1200N/m (as per ASTM D 903), hydrostatic head resistance 70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self adhesive polymer layer, etc, including surface preparation completely as per specification. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 749.6 749.6 63.57 False None None False None False 47652.072 0 3611570 131244 None 8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 110.27 110.27 20.1 False None None False None False 2216.427 0 3611571 131244 None V-5P140I12.4 Geophysical investigation of site for sinking Borewell for supplying drinking water to Habitation either through the Handpump, MWS or PWSS by vertical sounding by adopting veener sounding by adopting veener or schlumbergers's including reconassiance of survey of Geological formation,geophysical investigation of existing ground water in the vicinity quality, quantity and acceptability of the user including the location of site,recommended department of casing pipe required to seal the top and consolidated formation including an extra depth of 1.00Mtr in consolidated formation including an extra depth of drilling required to cover full depth of occupier proposed to trap probable yield and other information required including transportation of instrument and accessories to work site engaging technical personnel labour required etc complete as directed by Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6551.83 6551.83 1.0 False None None False None False 6551.83 0 3611572 131244 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 458.43 458.43 50.0 False None None False None False 22921.5 0 3611573 131244 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above 50 Mtrs and upto 100 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 574.9 574.9 50.0 False None None False None False 28745.0 0 3611574 131244 None V-5P139I12.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth" Above100 Mtrs. and upto 150 Mtr ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 610.83 610.83 50.0 False None None False None False 30541.5 0 3611575 131244 None V-5P143I12.32 Supply Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2394.99 2394.99 20.0 False None None False None False 47899.8 0 3611576 131244 None V-5P155I13.28 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 681.45 681.45 150.0 False None None False None False 102217.5 0 3611577 131244 None V-5P143I12.33 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 185.85 185.85 1.0 False None None False None False 185.85 0 3611578 131244 None V-5P154I12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 203.2 203.2 1.0 False None None False None False 203.2 0 3611579 131244 None 18-19 SR13.81.3 Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Nos 260.19 260.19 1.0 False None None False None False 260.19 0 3611580 131244 None V-5P154I13.11.5 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00" - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. 5.00 HP - 90 LPM @ 66 m = 10 STG Outlet Dia - 2.00" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39817.74 39817.74 1.0 False None None False None False 39817.74 0 3611581 131244 None V-5P155I13.23 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter Up to 6 HP - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11832.45 11832.45 1.0 False None None False None False 11832.45 0 3611582 131244 None V-5P155I13.29 Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets. complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1920.45 1920.45 1.0 False None None False None False 1920.45 0 3611583 131244 None V-5P155I13.31 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 49.56 49.56 100.0 False None None False None False 4956.0 0 3611584 131244 None V-5P156I13.32 Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job. as per specifications, with testing of as per instructions of engineer incharge of work - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 8053.5 8053.5 1.0 False None None False None False 8053.5 0 3611585 131244 None V-5P156I13.33 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 1672.65 1672.65 1.0 False None None False None False 1672.65 0 3611586 131244 None 2.6.2 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4 mm2 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 208.15 208.15 165.0 False None None False None False 34344.75 0 3611587 131244 None V-5P20I5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour enameled metal paint etc., complete 16 SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 30000.0 False None None False None False 15900.0 0 3611588 131244 None V-5P21I5.44.4 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase /Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600mmx600mmx170mm. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17990.28 17990.28 1.0 False None None False None False 17990.28 0 3611589 131244 None 5.6.6 V-6 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20" x 2.5" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 404.08 404.08 1.0 False None None False None False 404.08 0 3611590 131244 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 1.0 False None None False None False 514.19 0 3611591 131244 None 13.18.1 Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15A to 63A TPST ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 344.44 344.44 1.0 False None None False None False 344.44 0 3611592 131244 None 5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 1.0 False None None False None False 594.72 0 1721828234000 0 None None Buildings NARAYANPUR IN SHORAPUR TALUK OF YADGIR DISTRICT (WATER SUPPLY AND SANITARY WORKS) 2711710.47 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3611593 131245 None V-2 13.50.5 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm dia pipes, From wash basin waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 376.66 376.66 50.0 False None None False None False 18833.0 0 3611594 131245 None V-2 13.50.6 Providing and fixing normal gauge polythene pipes of approved quality Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm dia pipes, From sink & urinal waste lines ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 478.25 478.25 20.0 False None None False None False 9565.0 0 3611595 131245 None V-2 13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 358.07 358.07 185.0 False None None False None False 66242.95 0 3611596 131245 None V-2 13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 477.02 477.02 120.0 False None None False None False 57242.4 0 3611597 131245 None V-2 IT.NO 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 244.08 244.08 35.0 False None None False None False 8542.8 0 3611598 131245 None V-2 IT.NO 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 360.55 360.55 50.0 False None None False None False 18027.5 0 3611599 131245 None V-2 P.NO 128 IT.NO 13.63 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 302.32 302.32 55.0 False None None False None False 16627.6 0 3611600 131245 None V-2 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1511.58 1511.58 21.0 False None None False None False 31743.18 0 3611601 131245 None V-2 P.NO 127 IT.NO 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6891.32 6891.32 4.0 False None None False None False 27565.28 0 3611602 131245 None V-2 P.NO 130 IT.NO 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 614.54 614.54 4.0 False None None False None False 2458.16 0 3611603 131245 None V-2 P.NO 123 IT.NO 14.38 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 179.66 179.66 4.0 False None None False None False 718.64 0 3611604 131245 None V-2 P.NO 178 IT.NO 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :: W.C. pan with ISI marked white solid plastic seat and lid" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7405.5 7405.5 9.0 False None None False None False 66649.5 0 3611605 131245 None V-2 P.NO 124 IT.NO14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6051.28 6051.28 10.0 False None None False None False 60512.8 0 3611606 131245 None V-2 P.NO 126 IT.NO 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6296.6 6296.6 2.0 False None None False None False 12593.2 0 3611607 131245 None V-2 P.NO 126 IT.NO 14.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (510x1040 mm bowl depth 250 mm)" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6960.7 6960.7 4.0 False None None False None False 27842.8 0 3611608 131245 None V-2 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 898.28 898.28 12.0 False None None False None False 10779.36 0 3611609 131245 None V-2 P.NO 124 IT.NO 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3818.6 3818.6 13.0 False None None False None False 49641.8 0 3611610 131245 None V-2 P.NO 120 IT.NO 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 382.85 382.85 90.0 False None None False None False 34456.5 0 3611611 131245 None V-2 P.NO 120 IT.NO 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 20 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 469.58 469.58 70.0 False None None False None False 32870.6 0 3611612 131245 None V-2 p.NO 120 IT.NO 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 25 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 70.0 False None None False None False 41370.0 0 3611613 131245 None V-2 P.NO 120 IT.NO 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 690.12 690.12 30.0 False None None False None False 20703.6 0 3611614 131245 None V-2 P.NO 120 IT.NO 13.31.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 664.1 664.1 20.0 False None None False None False 13282.0 0 3611615 131245 None V-2 P.NO 120IT.NO 13.31.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc." 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 967.66 967.66 20.0 False None None False None False 19353.2 0 3611616 131245 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 268.86 268.86 50.0 False None None False None False 13443.0 0 3611617 131245 None V-2 P.NO 120 IT.NO 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 366.74 366.74 50.0 False None None False None False 18337.0 0 3611618 131245 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 215.0 False None None False None False 127065.0 0 3611619 131245 None V-2 P.NO 120 IT.NO 13.33.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 65mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 1734.6 1734.6 25.0 False None None False None False 43365.0 0 3611620 131245 None V-2 P.NO 120 IT.NO 13.33.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 50mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 893.32 893.32 40.0 False None None False None False 35732.8 0 3611621 131245 None V2 13.5.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :" 25 mm nominal bore ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 411.35 411.35 12.0 False None None False None False 4936.2 0 3611622 131245 None V2-13.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 740.92 740.92 7.0 False None None False None False 5186.44 0 3611623 131245 None V-2 13.4.3 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 869.78 869.78 9.0 False None None False None False 7828.02 0 3611624 131245 None v2-13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1059.35 1059.35 2.0 False None None False None False 2118.7 0 3611625 131245 None V-2,A-13, IT.NO 13.2.1 Brass bib-cock 15 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 354.35 354.35 19.0 False None None False None False 6732.65 0 3611626 131245 None V-2 IT.NO 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Ltr 11.15 11.15 3000.0 False None None False None False 33450.0 0 3611627 131245 None V2 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kg 182.13 182.13 125.0 False None None False None False 22766.25 0 3611628 131245 None Market Rate Providing and fixing 7.50cms to 15cms dia N.P. Grating 100mm dia. (Page.91/I.No.12.111) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 177.0 177.0 55.0 False None None False None False 9735.0 0 3611629 131245 None Market Rate Air Vent Cowel 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 413.0 413.0 12.0 False None None False None False 4956.0 0 3611630 131245 None Market Rate Air Vent Cowel 110mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 590.0 590.0 12.0 False None None False None False 7080.0 0 3611631 131245 None Market Rate Supplying and fixing Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards with a single 15mm C.P. 32mm dia CP waste coupling, 32mmdia heavy duty CP bottle trap with extension pipe, CP wall flanges, 2 Nos.15mm dia C.P. angle cocks, 2nos.C.P. flexible inlet connection pipes, CI brackets etc., complete including silicon sealant filling. (Jaguar make or Equalent ) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6844.0 6844.0 9.0 False None None False None False 61596.0 0 3611632 131245 None Market Rate Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2183.0 2183.0 9.0 False None None False None False 19647.0 0 3611633 131245 None Market Rate Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 95.0 False None None False None False 72865.0 0 3611634 131245 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. a) 65mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4130.0 4130.0 2.0 False None None False None False 8260.0 0 3611635 131245 None Market Rate Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. b) 50mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3304.0 3304.0 4.0 False None None False None False 13216.0 0 3611636 131245 None V2 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 345.68 345.68 4.0 False None None False None False 1382.72 0 3611637 131245 None V2 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 5335.13 5335.13 18.0 False None None False None False 96032.34 0 3611638 131245 None V2 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with chase cutter and embed ding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 3455.57 3455.57 10.0 False None None False None False 34555.7 0 3611639 131245 None V2 13.28 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 79.3 79.3 70.0 False None None False None False 5551.0 0 3611640 131245 None 14.36.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 111.51 111.51 23.0 False None None False None False 2564.73 0 3611641 131245 None 14.37.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Unit 379.13 379.13 23.0 False None None False None False 8719.99 0 3611642 131245 None 13.8.1.1 Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 102.84 102.84 23.0 False None None False None False 2365.32 0 3611643 131245 None 14.22.A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1003.59 1003.59 23.0 False None None False None False 23082.57 0 3611644 131245 None 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 768.18 768.18 53.0 False None None False None False 40713.54 0 3611645 131245 None V2 14.63A Providing and fixing Single lever sink mixer with swivel spout top outlet wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4667.31 4667.31 4.0 False None None False None False 18669.24 0 3611646 131245 None 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5518.51 5518.51 4.0 False None None False None False 22074.04 0 3611647 131245 None ELE 7.3 Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3 density Rock wool insulation with 22SWG Aluminium cladding." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 39372.94 39372.94 3.0 False None None False None False 118118.82 0 3611648 131245 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-110mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 944.0 944.0 10.0 False None None False None False 9440.0 0 3611649 131245 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-75mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 767.0 767.0 2.0 False None None False None False 1534.0 0 3611650 131245 None A.R Drilling with core cutting machine in RCC beams, slabs,floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. Core cut-160MM dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1298.0 1298.0 1.0 False None None False None False 1298.0 0 3611651 131245 None V-1,P.NO 6,IT.NO 1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 299.84 299.84 224.0 False None None False None False 67164.16 0 3611652 131245 None V-1 P.NO 7 IT.NO 1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Cum 536.49 536.49 224.0 False None None False None False 120173.76 0 3611653 131245 None V-5 P.NO 134 IT.NO 10.3 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete. for:" Pipes of SN8 Self Fit - 160mm dia. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 764.46 764.46 300.0 False None None False None False 229338.0 0 3611654 131245 None V-5 P.NO 134 IT.NO 10.2.4 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:( For external Rain water Work ). - do - 160 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 713.66 713.66 70.0 False None None False None False 49956.2 0 3611655 131245 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 45.0 False None None False None False 304087.95 0 3611656 131245 None V-5 P.NO 187 IT.NO 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CATCH BASIN) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6757.51 6757.51 15.0 False None None False None False 101362.65 0 3611657 131245 None 13.39 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3197.86 3197.86 25.0 False None None False None False 79946.5 0 3611658 131245 None 16.18 Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting and using of sight rails and boning rods wherever necessary, shoring and strutting wherever required using Ordinary Port Land Cement, using 1:1.5:3 proportion RCC with 20 mm and down graded jelly, well graded sand and steel of approved quality, 200 mm thick top concrete slab, having wall thickness and raft thickness as in approved drawings and with an offset in raft alround the chamber as in approved drawing, benching concrete with 1:6 slope towards the central drain finished smooth, including fixing and grouting of pipes, including conveying to work spot supply and fixing SFRC Machinehole cover and frame (Heavy duty) conforming to IS:12592 with latest amendments, on a bed of CC 1:2:4 Providing and fixing of minimum 3 mm thick encapsulated plastic footsteps (as per IS 10910) on 12 mm dia. Grade Fe-500 steel bar (as per IS 1786) staggered at 300 mm apart as detailed in Technical specifications, including stone grit beding wherever required, watering, curing, engraving Machinehole number with flow direction on the inner cylindrical surface etc., complete including cost of reinforcement steel and fabrication charges and also cost and conveyance of all materials, labour with all lead and lifts. The Pre-cast RCC Machinehole are for various diamters and depths as stated below and as per detailed drawings, specifications and direction of the Engineer. For 1.2m dia Machinehole:" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 97246.63 97246.63 1.0 False None None False None False 97246.63 0 3611659 131245 None V-2 P.NO 120 IT.NO 13.33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 40mm DWS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 591.0 591.0 80.0 False None None False None False 47280.0 0 3611660 131245 None 13.23 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (50 mm nominal bore, 242mm long, weighing not less than 1240 g) T. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1665.22 1665.22 5.0 False None None False None False 8326.1 0 3611661 131245 None 13.40.1 V-5 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. (pump room collection sump pumps) (2 HP, Size 65x50 Head 13M, Discharge 462 LPM) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19340.79 19340.79 2.0 False None None False None False 38681.58 0 3611662 131245 None 13.32 V-5 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work." ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 8053.5 8053.5 2.0 False None None False None False 16107.0 0 1721828234000 0 None None Buildings NARAYANPUR IN SHORAPUR TALUK OF YADGIR DISTRICT (ELECTRICAL WORKS) 4364380.98 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3611663 131246 None PWD ELE SR V-6 IT.NO 2.2.1 WIRES & CABLES Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 333.29 333.29 25.0 False None None False None False 8332.25 0 3611664 131246 None PWD ELE SR V-10 IT.NO 2.2.2 Point wiring using Copper wire without switch. "Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet." Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Pack 469.58 469.58 36.0 False None None False None False 16904.88 0 3611665 131246 None PWD ELE SR V-11 IT.NO 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 687.65 687.65 63.0 False None None False None False 43321.95 0 3611666 131246 None PWD ELE SR V-12 IT.NO 2.2.4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 838.8 838.8 8.0 False None None False None False 6710.4 0 3611667 131246 None PWD ELE SR V-14 IT.NO 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 170.98 170.98 25.0 False None None False None False 4274.5 0 3611668 131246 None PWD ELE SR V-15 IT.NO 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 197.0 197.0 32.0 False None None False None False 6304.0 0 3611669 131246 None PWD ELE SR V-16 IT.NO 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 219.3 219.3 16.0 False None None False None False 3508.8 0 3611670 131246 None PWD ELE SR V-17 IT.NO 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 272.58 272.58 7.0 False None None False None False 1908.06 0 3611671 131246 None PWD ELE SR V-18 IT.NO 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 323.38 323.38 20.0 False None None False None False 6467.6 0 3611672 131246 None PWD ELE SR V-20 IT.NO 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 199.48 199.48 32.0 False None None False None False 6383.36 0 3611673 131246 None PWD ELE SR V-21 IT.NO 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 216.83 216.83 16.0 False None None False None False 3469.28 0 3611674 131246 None PWD ELE SR V-22 IT.NO 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 289.93 289.93 7.0 False None None False None False 2029.51 0 3611675 131246 None PWD ELE SR V-23 IT.NO 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 351.88 351.88 21.0 False None None False None False 7389.48 0 3611676 131246 None PWD ELE SR V-24 IT.NO 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 426.22 426.22 31.0 False None None False None False 13212.82 0 3611677 131246 None PWD ELE SR V-26 IT.NO 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 126.38 126.38 217.0 False None None False None False 27424.46 0 3611678 131246 None PWD ELE SR V-6 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 205.67 205.67 2.0 False None None False None False 411.34 0 3611679 131246 None PWD ELE SR V-6,IT.NO 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 211.87 211.87 81.0 False None None False None False 17161.47 0 3611680 131246 None PWD ELE SR V-6,IT.NO 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 442.32 442.32 24.0 False None None False None False 10615.68 0 3611681 131246 None PWD ELE SR V-6,IT.NO 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 223.02 223.02 10.0 False None None False None False 2230.2 0 3611682 131246 None PWD ELE SR V-6, IT.NO 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 403.91 403.91 15.0 False None None False None False 6058.65 0 3611683 131246 None PWD ELE SR V-6,IT.NO 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 292.4 292.4 25.0 False None None False None False 7310.0 0 3611684 131246 None PWD ELE SR V-6,IT.NO 1.13 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 144.96 144.96 24.0 False None None False None False 3479.04 0 3611685 131246 None PWD ELE SR V-6,IT.NO-1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 81.77 81.77 890.0 False None None False None False 72775.3 0 3611686 131246 None PWD ELE SR V-6,IT.NO 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 96.64 96.64 1030.0 False None None False None False 99539.2 0 3611687 131246 None PWD ELE SR V-6, IT.NO .2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 127.62 127.62 250.0 False None None False None False 31905.0 0 3611688 131246 None PWD ELE SR V-6,IT.NO1.3.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 84.25 84.25 445.0 False None None False None False 37491.25 0 3611689 131246 None PWD ELE SR V-6,IT.NO-1.3.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 97.88 97.88 515.0 False None None False None False 50408.2 0 3611690 131246 None PWD ELE SR V-6,IT.NO-1.3.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 122.66 122.66 150.0 False None None False None False 18399.0 0 3611691 131246 None PWD ELE SR V-6,IT.NO 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 32.21 32.21 470.0 False None None False None False 15138.7 0 3611692 131246 None PWD ELE SR V-6,IT.NO 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 52.04 52.04 1530.0 False None None False None False 79621.2 0 3611693 131246 None PWD ELE SR V-6,IT.NO 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 78.06 78.06 740.0 False None None False None False 57764.4 0 3611694 131246 None PWD ELE SR V-6,IT.NO 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 113.99 113.99 580.0 False None None False None False 66114.2 0 3611695 131246 None PWD ELE SR V-6,IT.NO 5.19.11 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5003.08 5003.08 2.0 False None None False None False 10006.16 0 3611696 131246 None PWD ELE SR V-6,IT.NO 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 6-32Amps SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 514.19 514.19 62.0 False None None False None False 31879.78 0 3611697 131246 None PWD ELE SR V-6 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 40Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3771.52 3771.52 2.0 False None None False None False 7543.04 0 3611698 131246 None PWD ELE SR V-6,IT.NO 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 5299.2 5299.2 2.0 False None None False None False 10598.4 0 3611699 131246 None PWD ELE SR V-6,IT.NO 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 480.73 480.73 10.0 False None None False None False 4807.3 0 3611700 131246 None PWD ELE SR V-6,IT.NO 6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 39.65 39.65 16.0 False None None False None False 634.4 0 3611701 131246 None V-6 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4348.89 4348.89 7.0 False None None False None False 30442.23 0 3611702 131246 None V-6 12.58.2 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 101.6 101.6 100.0 False None None False None False 10160.0 0 3611703 131246 None 12.58.6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600X600X3 GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1084.13 1084.13 6.0 False None None False None False 6504.78 0 3611704 131246 None 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10 12W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1096.52 1096.52 19.0 False None None False None False 20833.88 0 3611705 131246 None 11.5.3 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 1640.44 1640.44 5.0 False None None False None False 8202.2 0 3611706 131246 None 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 854.91 854.91 51.0 False None None False None False 43600.41 0 3611707 131246 None 11.11.3 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 184.61 184.61 15.0 False None None False None False 2769.15 0 3611708 131246 None PWD ELE SR V-6,IT.NO 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1848.59 1848.59 13.0 False None None False None False 24031.67 0 3611709 131246 None PWD ELE SR V-6,IT.NO 6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3316.8 3316.8 24.0 False None None False None False 79603.2 0 3611710 131246 None PWD ELE SR V-6,IT.NO 13.11 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 390.29 390.29 24.0 False None None False None False 9366.96 0 3611711 131246 None PWD ELE SR V-6,IT.NO 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 151.16 151.16 83.0 False None None False None False 12546.28 0 3611712 131246 None PWD ELE SR V-6,IT.NO 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 875.97 875.97 13.0 False None None False None False 11387.61 0 3611713 131246 None PWD ELE SR V-6,IT.NO 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 200.72 200.72 3.0 False None None False None False 602.16 0 3611714 131246 None PWD ELE SR V-6,IT.NO 5.42.1 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 86000.0 False None None False None False 45580.0 0 3611715 131246 None PWD ELE SR V-6,IT.NO 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 5.0 False None None False None False 21279.85 0 3611716 131246 None PWD ELE SR V-6,IT.NO 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 10.0 False None None False None False 3779.0 0 3611717 131246 None PWD ELE SR V-6,IT.NO 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 10.0 False None None False None False 9366.8 0 3611718 131246 None PWD ELE SR V-6,IT.NO 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) 100Amps 25kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 10515.39 10515.39 1.0 False None None False None False 10515.39 0 3611719 131246 None PWD ELE SR V-6,iT.NO 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps DP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 10.0 False None None False None False 38260.3 0 3611720 131246 None PWD ELE SR V-6,IT.NO 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 11541.29 11541.29 1.0 False None None False None False 11541.29 0 3611721 131246 None PWD ELE SR V-6,IT.NO 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3611722 131246 None PWD ELE SR V-6,IT.NO 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 696.32 696.32 3.0 False None None False None False 2088.96 0 3611723 131246 None PWD ELE SR V-6,IT.NO5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Kvar 594.72 594.72 15.0 False None None False None False 8920.8 0 3611724 131246 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way SP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 2885.63 2885.63 2.0 False None None False None False 5771.26 0 3611725 131246 None 5.19.12 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6120.66 6120.66 1.0 False None None False None False 6120.66 0 3611726 131246 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3826.03 3826.03 1.0 False None None False None False 3826.03 0 3611727 131246 None 5.20.8 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 6377.13 6377.13 3.0 False None None False None False 19131.39 0 3611728 131246 None 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 109549.9 109549.9 0.1 False None None False None False 10954.99 0 3611729 131246 None 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 35 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 190882.82 190882.82 0.05 False None None False None False 9544.141 0 3611730 131246 None 32.13 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 70 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 393892.97 393892.97 0.1 False None None False None False 39389.297 0 3611731 131246 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.05 False None None False None False 1293.8875 0 3611732 131246 None 31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 38581.22 38581.22 0.2 False None None False None False 7716.244 0 3611733 131246 None 6.17.6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 15.41 15.41 20.0 False None None False None False 308.2 0 3611734 131246 None 16.17.10 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 70 sqmm Long Barrel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 148.68 148.68 16.0 False None None False None False 2378.88 0 3611735 131246 None 11.11.5 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 333.29 333.29 9.0 False None None False None False 2999.61 0 3611736 131246 None 11.6.3 Supplying of recess mounting non integral type .LED . W luminaire comprising of pressure decastextruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' 34 36watt ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 5641.17 5641.17 8.0 False None None False None False 45129.36 0 3611737 131246 None 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 4985.74 4985.74 2.0 False None None False None False 9971.48 0 3611738 131246 None 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1810.18 1810.18 3.0 False None None False None False 5430.54 0 3611739 131246 None 5.14.1 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 2738.19 2738.19 2.0 False None None False None False 5476.38 0 3611740 131246 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 169.74 169.74 24.0 False None None False None False 4073.76 0 3611741 131246 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 395.24 395.24 31.0 False None None False None False 12252.44 0 3611742 131246 None 2.2.5 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Point 1225.37 1225.37 4.0 False None None False None False 4901.48 0 3611743 131246 None 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 144.96 144.96 6.0 False None None False None False 869.76 0 3611744 131246 None 12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 78.06 78.06 21.0 False None None False None False 1639.26 0 3611745 131246 None 3.6.11 TV/Telephone socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 193.28 193.28 2.0 False None None False None False 386.56 0 3611746 131246 None 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 304.79 304.79 1.0 False None None False None False 304.79 0 3611747 131246 None 32.02 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 2 core 10 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 98168.45 98168.45 0.1 False None None False None False 9816.845 0 3611748 131246 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 25877.75 25877.75 0.1 False None None False None False 2587.775 0 3611749 131246 None pwd sr Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 15.41 15.41 15.0 False None None False None False 231.15 0 3611750 131246 None 11..11.7 Supplying & fixing of retrofit type LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500-degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 527.81 527.81 3.0 False None None False None False 1583.43 0 3611751 131246 None 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 64.43 64.43 2.0 False None None False None False 128.86 0 3611752 131246 None 11.8.1 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 25watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 3004.58 3004.58 1.0 False None None False None False 3004.58 0 3611753 131246 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers32Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 298.6 298.6 1.0 False None None False None False 298.6 0 3611754 131246 None 5.30 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 1709.82 1709.82 1.0 False None None False None False 1709.82 0 3611755 131246 None 7.1.3 Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting.25Litres ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 12689.84 12689.84 1.0 False None None False None False 12689.84 0 3611756 131246 None PWD SR 2023-24 Volume 6 It No-9.3.3 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. 5 kVA ON LINE UPS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 84726.54 84726.54 1.0 False None None False None False 84726.54 0 3611757 131246 None PWD SR 2023-24 Volume 6 It No-9.5.9 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150AH capacity ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 19693.91 19693.91 4.0 False None None False None False 78775.64 0 3611758 131246 None A.R Item Name : The Tenderer (agency) should arrange to obtain (get), detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration &proof checking by reputedGovernment/Semi Government/IISC /IIT/NIT/or as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, 3D view, MFP design and Drawings, Internal and External Electrical services including electrical infrastructure, etc. Interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project and 6 sets of as built drawings should be submitted to the employer. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Job 300000.0 300000.0 1.0 False None None False None False 300000.0 0 3611759 131246 None LQR IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),30M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 23836.0 23836.0 4.0 False None None False None False 95344.0 0 3611760 131246 None LQR IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8 2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),60M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 25606.0 25606.0 2.0 False None None False None False 51212.0 0 3611761 131246 None LQR Supplying, installation, testing and commissioning of SITC of complete 8 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up to 16 channels),internal storage supports 8HDDs expandable up to 64TB (8TB each),operating temperatures(-10 degree C) and (55 degree C),UL,CE,FCC. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3611762 131246 None LQR Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 17110.0 17110.0 2.0 False None None False None False 34220.0 0 3611763 131246 None LQR Supply and Installation of I/Os ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 147.5 147.5 12.0 False None None False None False 1770.0 0 3611764 131246 None LQR Supply and Installation of 2 Mtrs Patch Chord The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 265.5 265.5 12.0 False None None False None False 3186.0 0 3611765 131246 None LQR Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 336.3 336.3 6.0 False None None False None False 2017.8 0 3611766 131246 None LQR Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3611767 131246 None V-6 8.1 Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 47.08 47.08 600.0 False None None False None False 28248.0 0 3611768 131246 None 1.2.2 Supplying heavy gauge PVC Consealed conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 96.64 96.64 500.0 False None None False None False 48320.0 0 3611769 131246 None 8.12.3 Supplying & Fixing of Patch panel for LAN cabling .16 Port 10/100 patch panel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 3778.95 3778.95 1.0 False None None False None False 3778.95 0 3611770 131246 None 8.4.1 v-6 Supplying & Fixing of switch mounting rack with power manager & Cable manager 4U with 450mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 6061.19 6061.19 1.0 False None None False None False 6061.19 0 3611771 131246 None 1.01 Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 8767.16 8767.16 8.0 False None None False None False 70137.28 0 3611772 131246 None 2.02 Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 1379.01 1379.01 8.0 False None None False None False 11032.08 0 3611773 131246 None 6.05 Supply of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 107.79 107.79 6.0 False None None False None False 646.74 0 3611774 131246 None 13.12 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 6.0 False None None False None False 356.82 0 3611775 131246 None 2.16 Supply of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 296.12 296.12 11.0 False None None False None False 3257.32 0 3611776 131246 None 2.16 Erection of Spiral Earth Electrode ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 115.23 115.23 11.0 False None None False None False 1267.53 0 3611777 131246 None 68.17 Supply and fixing of Caution/Danger Board ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 185.85 185.85 6.0 False None None False None False 1115.1 0 3611778 131246 None 4.02 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 110.27 110.27 8.0 False None None False None False 882.16 0 3611779 131246 None 5.09 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 52.04 52.04 8.0 False None None False None False 416.32 0 3611780 131246 None 24.05 Supply and fixing of 11 kV, 400 Amps Double Break GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 26341.14 26341.14 1.0 False None None False None False 26341.14 0 3611781 131246 None 24.07 Supply and fixing of H-Frame for mounting GOS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 7521.97 7521.97 1.0 False None None False None False 7521.97 0 3611782 131246 None 25.01 Supply of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 7279.13 7279.13 1.0 False None None False None False 7279.13 0 3611783 131246 None 13.01 Erection of DOLO Cut Out ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set of 3 Nos 293.64 293.64 1.0 False None None False None False 293.64 0 3611784 131246 None 13.07 Supply, erection, testing and commissioning of 63 KVA 5Star rated Aluminium wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, , oil level indicator with + 5% to -10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 210958.34 210958.34 1.0 False None None False None False 210958.34 0 3611785 131246 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 4348.89 4348.89 8.0 False None None False None False 34791.12 0 3611786 131246 None 12.58.3 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work MT 158.59 158.59 100.0 False None None False None False 15859.0 0 3611787 131246 None 12.58.9 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 2035.68 2035.68 100.0 False None None False None False 203568.0 0 3611788 131246 None 12.58.11 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 9194.62 9194.62 10.0 False None None False None False 91946.2 0 3611789 131246 None 45.07 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Outdoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 5039.01 5039.01 4.0 False None None False None False 20156.04 0 3611790 131246 None 45.04 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Indoor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 3887.98 3887.98 2.0 False None None False None False 7775.96 0 3611791 131246 None 36.01 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 1102296.17 1102296.17 0.1 False None None False None False 110229.617 0 3611792 131246 None 38. Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sqm 1222.89 1222.89 150.0 False None None False None False 183433.5 0 3611793 131246 None 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Sq CM 0.53 0.53 176000.0 False None None False None False 93280.0 0 3611794 131246 None 5.40.2 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 4255.97 4255.97 6.0 False None None False None False 25535.82 0 3611795 131246 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 377.9 377.9 12.0 False None None False None False 4534.8 0 3611796 131246 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 936.68 936.68 12.0 False None None False None False 11240.16 0 3611797 131246 None 5.15.15 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 250Amps 35kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 29172.26 29172.26 1.0 False None None False None False 29172.26 0 3611798 131246 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 638.09 638.09 3.0 False None None False None False 1914.27 0 3611799 131246 None 10.1.3 Supplying, installing, testing and commissioning of 25KVA/20kw Diesel Generator set(CPCB-4) with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 Generator set specificationsEngine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have + 1.0 % Voltage regulation (max) in static conditions- IP: 23 protections with insulation class H. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lamps for ‘Load On’ and ‘Set Running’, Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections. Genset Controller: microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight. Operator interface, Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory, Provide Alternator Data. Voltage (1 ph or 3 ph line to line and line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph and total), Frequency, Provide Engine Data, Starting battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Meter calibration, Engine controls, Power Start operates on 12 VDC batteries,- Auto start mode accepts a ground signal from remote devices to automatically start the DG set. The remote start will also wake up the control system from sleep mode. Acoustic enclosure: The acoustic enclosure shall be made of 1.6 mm thick CRCA sheets in suitable approved shade and a structural/ sheet metal base frame painted in black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75dBA at 1 mtr sound levels specified by Ministry of Environment & Forest. The enclosure has the following features: Specially designed to meet stringent MOEF/ CPCB norms of 75dBA @ 1mtr at 75% load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 558914.14 558914.14 1.0 False None None False None False 558914.14 0 3611800 131246 None 10.2.2 Supply, Erection, testing and commissioning of AMF panel suitable for .KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .amps 4 pole contactor for alternator with thermal O/L relay,. Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and flat/Boost facility. 25 KVA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 72742.93 72742.93 1.0 False None None False None False 72742.93 0 3611801 131246 None A.R Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 3540.0 3540.0 5.0 False None None False None False 17700.0 0 3611802 131246 None A.R Supply and laying of 2Cx2.5SQ MM and 6CX2.5 SQ MM Sheilded Sensor and control Cables ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Rmtr 236.0 236.0 50.0 False None None False None False 11800.0 0 3611803 131246 None 58.02 LT Metering Cubicle at Low Tension for 50KW to 150KW having specification and design as per the prototype approval (Excluding Meter cost and modem cost) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 98973.8 98973.8 1.0 False None None False None False 98973.8 0 3611804 131246 None 53.01 CT PT Operated ETV Meter 0.2s Accuracy class with ABT feature and DLMS protocal with ToD with RS232 Port UNIDIRACTIONAL ( Used for HT Installation, LT Metering Cubicle (50-150KW) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 24302.99 24302.99 1.0 False None None False None False 24302.99 0 3611805 131246 None 10.01 Supply and fixing of PG Clamps for Rabbit Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Each 173.46 173.46 15.0 False None None False None False 2601.9 0 3611806 131246 None v-6 2.02 Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 603.39 603.39 6.0 False None None False None False 3620.34 0 3611807 131246 None v-6 2.02 Erection of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL" ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 318.42 318.42 6.0 False None None False None False 1910.52 0 3611808 131246 None v-6 6.06 Supply and fixing of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) " ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 254.0 254.0 18.0 False None None False None False 4572.0 0 3611809 131246 None v-6 6.10 Supply and fixing of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 235.45 235.45 18.0 False None None False None False 4238.1 0 3611810 131246 None 13.12 v-6 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work No 59.47 59.47 18.0 False None None False None False 1070.46 0 3611811 131246 None v-6 6.08 Supply and fixing of 15 Strain Insulator ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Set 73.1 73.1 4.0 False None None False None False 292.4 0 3611812 131246 None 7.02 Supply of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 57283.93 57283.93 1.0 False None None False None False 57283.93 0 3611813 131246 None 6.02 V-6 Erection of Rabbit ACSR Conductor ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work Km 5403.28 5403.28 1.0 False None None False None False 5403.28 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1721828237000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1721828237000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1721828237000 1 None None ELIGIBILITY Bidders shall ensure upload ESI and EFP registration certificate None 1721828237000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1721828237000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1721885193000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end None 1721885205000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1721885212000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs None 1721885219000 0 None None ELIGIBILITY Conditional tenders will not be accepted None 1721885226000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner None 1721885231000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time None 1721885236000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected None 1721885241000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender None 1721885247000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1721885256000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid None 1721885261000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution None 1721885267000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM ( Monday to Saturday) Ph No: 91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time None 1721885272000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation None 1721885280000 0 None None ELIGIBILITY Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work None 1721885286000 0 None None ELIGIBILITY Tenderer should have latest GST Registration and latest clearance certificate in their name None 1721885292000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be inclusive of GST None 1721885296000 0 None None ELIGIBILITY Special Instructions to tenderers - as per bid document None 1721885301000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work None 1721885320000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2019-20, 2020-21 2021-22, 2022-23 & 2023-24. None 1721885328000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been Satisfactorily completed at least one Similar work of value not less than Rs.1217.00 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24).Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1)Earthwork Excavation 16610.00 Cum,2)RCC and PCC 4813.00Cum,3)Steel Reinforcement for RCC work 284.00 tonne, 4)Cement Concrete Block Masonry/Solid Block Masonry /Load Bearing Wall/BBM 8562.00Sqm, 5)Flooring/Dadooing(Vitrified/Granite/Ceramic/Cement concrete/cladding/dadooing) 6286.00Sqm, 6)Plastering 26405.00 Sqm, 7)Painting 23590.00 Sqm, 8) MS Girls 8965.00 kgs, 9)WPC 5140.00 Sqm. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2(c) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24).The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs.153.00 Lakhs in any one financial year.Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d).The letter of willingness of the sub contractor to be engaged for electrical, should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(e)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24.The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs.95.00 Lakhs in any one financial year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e).The letter of willingness of the sub contractor to be engaged for water supply & Sanitary, should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No of Persons. (1) Project Manager B.E. Civil with minimum experience of 15 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (One) (2)Site Engineer B.E. Civil with minimum experience of 7 years in the Construction of buildings Or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years. 3 (three), (3)Electrical Engineer B.E. Electrical with minimum experience of 5 years in the Construction of buildings Or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (One). Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Educational and Experience certificates should be uploaded None None None None KPWD Class-I Registration Certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- REGISTRATION CERTIFICATE ISSUED BY COMPETENT AUTHORITY None None None None Clause ITT 3.3 (a)Equipment capacity Each tenderer should further demonstrate(a) available by owning at least 50% of the required/specified key and critical equipment for this work and (b) the remaining 50% can be deployed on ease/hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished. Sl.No. Description of Equipment Quantity 1) Min 10 cft capacity Concrete Mixer -3Nos, 2) Centering sheets-3500 Sqmtr, 3) Tipper-2 Nos, 4) Water Tanker-4Nos, 5) Bar Bending and cutting machine-2Nos, 6) Excavator-2 Nos. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Invoices and receipt to be uploaded None None None None Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5- B Where A maximum value of civil engineering works executed in any one year during the last five years 2019-20 to 2023-24 updated to 2024-25 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2024-25 price level of existing commitments and ongoing works to be completed during the next 15 months. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- list of existing commitments and on-going works None None None None Clause ITT 3.2(a):To qualify for award of this contract, each Tenderer in his / its name should have in the last five years i.e.(2019-20 to 2023-24).The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs. 3894.50 Lakhs. Note: For Clause 3.2 (a) the Turn over certificate and balance sheet duly certified by the charted accountant is to be submitted. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs.585.00 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate and balance sheet issued by charted accountant True Technical Bid KPWD Registration Certificate Class-I True Technical Bid ESI and PF certificate and latest paid receipt True Technical Bid GST certificate and latest paid receipt True Technical Bid Workdone certificate issued by the officer not below the rank of EE True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1721889334000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer, Engineering Wing, HFWD, Arogya Soudha, 3rd Floor, 1st Cross Magadi Road street None city Bengalruu state Karnataka pin 560023
tenderRecallDTO	None