createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1721643735219 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1530.00 emd 61000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 02-08-2024 16:00:00 tenderQueryClose 30-07-2024 16:00:00 technicalBidOpen 03-08-2024 16:30:00 publishedDate 25-07-2024 17:36:44 publishedByPost EWHFWD_EE_EEOFF_DWD publishedByUser KPE13493 - SURESH S N bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Sheela B Kandakur splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08362955800 mobileNumber 9449843327 tenderSupplierList None
tenderSchedule	createdTs 1721643735267 version 4 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT495 title Construction of of Health and Wellness Centre at MALALLIin Kundagol Taluk, Dharwad District. description Construction of of Health and Wellness Centre at MALALLI in Kundagol Taluk, Dharwad District. category WORKS categoryText Works ecv 6099884.51 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3524 locationName EWHFWD Executive Engineer Office Dharwad provisionalAmount 6100000.0 groupOverheadTotal None fileNumber hfw/eng/subdvn/dwd-23/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1721643735000 0 None None Buildings CONSTRUCTION OF HEALTH AND WELLNESS CENTER AT MALALLI IN KUNDAGOL TALUK, DHARWAD DISTRICT 6099884.51 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3579232 130156 None Item 1.12 Ground Floor Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depthnot exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumpsand other deleterious matter including dressing of excavated surfaces, disposingoff or levelling the excavated earth or sorting and stacking the selected earth forreuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools,usage of machinery and other appurtenances required to complete the work. ha 112.1 112.1 72.58 False None None False None False 8136.218 0 3579233 130156 None Item 1.14.1 Ground Floor Earth work excavation for Foundation by mechanical means for all works anddepth upto 3 m, as per drawing and technical specifications, including settingout, shoring, strutting, barricading, caution lights, including dressing ofexcavated surfaces, disposing off or levelling the excavated earth or sortingand stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery and other appurtenacesrequired to complete the work In all kinds of soils Depth upto 3 m Cum 120.36 120.36 169.61 False None None False None False 20414.2596 0 3579234 130156 None Item 5.4 Ground Floor Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 16 1 cement 6 coarse sand Cum 7539.02 7539.02 3.8 False None None False None False 28648.276 0 3579235 130156 None Item 2.1.3 Ground Floor PCC Providing and laying in position Cement Concrete for levelling course forall works in foundation. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed, laid inlayers not exceeding 150 mm thickness, well compacted using plate vibrators,including all lead and lifts, cost of all materials of quality, labour, Usage charges ofmachinery, curing, and all the other appurtenances required to complete thework as per technical specifications. Mix 136 M10 Using 40 mm nominal size graded crushed coarse aggregates. Cum 7067.02 7067.02 20.5 False None None False None False 144873.91 0 3579236 130156 None Item 2.2.3 Ground Floor FOOTINGS Providing and laying in position Cement Concrete for all Foundation works. The graniteortraporbasalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticizers laid in finishedlayers, well compacted using needle vibrators, including all lead and lifts, costof all materials, quality confirming to the requirements of relevant IS codes,labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 8% for Centering and Shuttering. Cum 8074.59 8074.59 19.4 False None None False None False 156647.046 0 3579237 130156 None Item 2.5.2 Ground Floor COLUMNS Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 70% for Centering and Shuttering. Cum 13727.06 13727.06 6.5 False None None False None False 89225.89 0 3579238 130156 None Item 2.5.2 Ground Floor PLINTH BEAM Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 50% for Centering and Shuttering. Cum 12112.11 12112.11 6.05 False None None False None False 73278.2655 0 3579239 130156 None Item 2.5.2 Ground Floor Curtain Wall Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 70% for Centering and Shuttering. Cum 13727.06 13727.06 8.5 False None None False None False 116680.01 0 3579240 130156 None Item 2.5.2 Ground Floor LINTEL and ROOF BEAM Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 60% for Centering and Shuttering. Cum 12919.58 12919.58 9.3 False None None False None False 120152.094 0 3579241 130156 None Item 2.5.2 Ground Floor RCC SLAB Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 50% for Centering and Shuttering. Cum 12112.11 12112.11 13.5 False None None False None False 163513.485 0 3579242 130156 None Item 2.5.2 Ground Floor RCC STAIRCASE Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 50% for Centering and Shuttering. Cum 12112.11 12112.11 6.0 False None None False None False 72672.66 0 3579243 130156 None Item 2.5.1 Ground Floor RCC For Chajja Providing and laying in position Cement Concrete for all Super structures ofbuilding , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 45% for Centering and Shuttering. Cum 11343.93 11343.93 0.6 False None None False None False 6806.358 0 3579244 130156 None Item 2.5.1 Ground Floor Septic Tank and Sump Tank Providing and laying in position Cement Concrete for all Super structures ofbuilding , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 20% for Centering and Shuttering. Cum 9388.08 9388.08 12.38 False None None False None False 116224.4304 0 3579245 130156 None Item 1.9 Ground Floor Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 313.88 313.88 110.4 False None None False None False 34652.352 0 3579246 130156 None Item 1.8 Ground Floor Construction of Embankment by excavating the available approved GravelorMurrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usageand all other appurtenaces required to complete the work Cum 559.32 559.32 54.5 False None None False None False 30482.94 0 3579247 130156 None Item 2.1.4 Ground Floor Cill concrete Providing and laying in position Cement Concrete for levelling course forall works in foundation. The graniteortrap orbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid inlayers not exceeding 150 mm thickness, well compacted using platevibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges ofmachinery, curing, and all the other appurtenances required to complete thework as per technical specifications.Mix 136 Using 20 mm nominal size graded crushed coarse aggregates Cum 7336.06 7336.06 3.21 False None None False None False 23548.7526 0 3579248 130156 None Item 2.11a Ground Floor Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, lapingorwelding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings t 105559.26 105559.26 7.954 False None None False None False 839618.35404 0 3579249 130156 None Item 6.32 Ground Floor Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgorm3and minimum compressive strength of 4.00 Normm2 conforming to IS2185 Part to I to 2005 and constructed with CM 14 as per IS 25722005including cost of all materials, labour, scaffolding and curing, usagecharges of machinery etc complete as per specifications. Sqm 1545.8 1545.8 202.0 False None None False None False 312251.6 0 3579250 130156 None Item 6.34 Ground Floor Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kgorm3and minimum compressive strength of 4.00 Normm2 conforming to IS2185 Part to I to 2005 and constructed with CM 14 as per IS 25722005including cost of all materials, labour,scaffolding and curing, usagecharges of machinery etc complete as per specifications. Sqm 1302.72 1302.72 39.5 False None None False None False 51457.44 0 3579251 130156 None Item 12.13.1 Ground Floor Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps, but including cost of materials, labour, usage charges complete as per specifications. Cum 116601.7 116601.7 0.5 False None None False None False 58300.85 0 3579252 130156 None Item 12.51 Ground Floor Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 136 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1198.88 1198.88 7.0 False None None False None False 8392.16 0 3579253 130156 None Item 10.6 Ground Floor Providing and fixing expansion hold fasteners on C.C. orR.C.C.orBrick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Wedge expansion type Fastener with threaded dia 6 mm Each 57.82 57.82 7.0 False None None False None False 404.74 0 3579254 130156 None Item 12.75.4 Ground Floor Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 100x70x4 mm ordinary type Each 165.2 165.2 21.0 False None None False None False 3469.2 0 3579255 130156 None Item 12.57.6 Ground Floor Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 parttoI 1991. from manufacturer complete as per spcification.todoto 35 mm thick both side commercial. Sqm 3919.96 3919.96 15.0 False None None False None False 58799.4 0 3579256 130156 None Item 12.86 Ground Floor Providing and fixing of 2totrack x 2topanel sliding windows made out of multichambered UPVC Matching to RALto9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free, gaskets togrey colour having isolated drainage and reinforced with Galvanized Iron profile throughtoout the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass,tandardhardwareand single point locking system with touch lock. Wall thickness of frame and sash shall be of 1.8 to 0.2 mm. Maximum possible size 1519mm x 1519mm. The cost is inclusive of all fixtures and separate charges for minor TandP's shall not be made Sqm 6360.2 6360.2 14.0 False None None False None False 89042.8 0 3579257 130156 None Item 11.34A Ground Floor Providing and fixing M.Sgrills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 198.24 198.24 295.0 False None None False None False 58480.8 0 3579258 130156 None Item 12.54 Ground Floor SOLID PVC Door Frame Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and joined 2 No.s of 150mm long brackets of 15x15mm M.S. Square tube, the entire door frame to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65or80mm size complete as per manufacturers specification and direction of Engineertointocharge. m 375.24 375.24 10.0 False None None False None False 3752.4 0 3579259 130156 None Item 12.53 Ground Floor Solid panel prelam pvc door shutter. Providing and fixing 30mm thick factory made rigid foam Prelam panelled Door Shutters made from M.S. Tube of 19x19mm, 19 guage for styles and 15x15mm for top and bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet and 30x50mm wide to form styles and 5mm thick and 75mm wide Prelaminated PVC Sheets for top rail, lock rail and bottom rail on either side and 5mm thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the styles and rails with PVC Designer beading on either side and joined together with solvent cement adhesive etc., complete as per manufacturers specification and direction of Engineertointocharge fixed to frames with 3 nos of 75 mm. Aluminium hinges. with one side prelam Sqm 1873.84 1873.84 3.15 False None None False None False 5902.596 0 3579260 130156 None Item 8.10 Ground Floor Providing 6 mm cement plaster with cement mortar 13 1 cement 3 fine sand on concrete surface or ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineertointocharge. Sqm 248.98 248.98 86.0 False None None False None False 21412.28 0 3579261 130156 None Item 8.1.1 Ground Floor Providing 12 mm cement plaster with cement mortar 14 1 cement 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineertointocharge. Sqm 300.9 300.9 490.0 False None None False None False 147441.0 0 3579262 130156 None Item 8.1.2 Ground Floor Providing 12 mm cement plaster with cement mortar 16 1 cement 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineertointo charge. Sqm 284.38 284.38 6.0 False None None False None False 1706.28 0 3579263 130156 None Item 8.51 Ground Floor Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 118.0 118.0 517.0 False None None False None False 61006.0 0 3579264 130156 None Item 8.8 Ground Floor Providing 18 mm cement plaster in two coats under layer 12 mm thickcement plaster with cement mortar 15 1 cement 5 coarse sand finishedwith a top layer 6 mm thick cement plaster with cement mortar 16 1cement 6fine sand to brick masonry including rounding off cornerswherever required smoothrendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specificationsand as per directions of Engineertointocharge. Sqm 437.78 437.78 270.0 False None None False None False 118200.6 0 3579265 130156 None Item 8.2.1 Ground Floor Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 14 1 cement 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineertointocharge. Sqm 348.09 348.09 33.5 False None None False None False 11661.015 0 3579266 130156 None Item 15.7 Ground Floor Integral Crystalline Water Proofing Admixture Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, selftoseal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width and resist hydrotostatic pressure upto 16bar for both positive and negative pressure confirming to DIN 1048 part 5 for 56percent reduction in depth of penetrationagainst control, resistance to chloride penetration confirming to ASTM C 1202 with 64percent improvement against control and protecting steel reinforcement against corrosion mixed at 1percent by weight of cementitiouscontent in concrete. ie., integral crystaline waterproofing admix at 0.5kgorbag of cement. For calculation purpose 320 kg of Cement for Mto20 grade of Concrete is considered in the analysis Sqm 725.69 725.69 6.15 False None None False None False 4462.9935 0 3579267 130156 None Item 9.21.2 Ground Floor Providing and laying Vitrified tiles in floor with different sizes thickness to be specified by the manufacturer, with water absorption less than 0.08percent and conforming to IS15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive water based conforming to IS 15477, in average 6 mm thickness, including grouting of joints Payment for grouting of joints to be made separately.Size of Tile 600x600 mm Sqm 1460.84 1460.84 78.0 False None None False None False 113945.52 0 3579268 130156 None Item 9.23 Ground Floor Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm average thick base of cement mortar 14 1 cement 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the EngineertointoCharge Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 2909.88 2909.88 26.0 False None None False None False 75656.88 0 3579269 130156 None Item 9.11 Ground Floor Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer, of 1st quality conforming to IS 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 14 1 Cement 4 Coarse sand, jointing with grey cement slurry at 3.3 kgor m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1049.02 1049.02 6.15 False None None False None False 6451.473 0 3579270 130156 None Item 9.38 Ground Floor Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 13 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1642.56 1642.56 37.0 False None None False None False 60774.72 0 3579271 130156 None Item 9.36 Ground Floor Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 16, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1947.0 1947.0 6.5 False None None False None False 12655.5 0 3579272 130156 None Item 11.26.1 Ground Floor Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the EngineertointoCharge. Sqm 162.84 162.84 245.0 False None None False None False 39895.8 0 3579273 130156 None Item 8.39 Ground Floor Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineertointocharge. Sqm 149.86 149.86 517.0 False None None False None False 77477.62 0 3579274 130156 None Item 8.30 Ground Floor Finishing walls with Acrylic Smooth exterior paint of required shade New work Two coat applied at 1.67 ltror10 m² over and including priming coat of exterior primer applied at 2.20 kgor10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineertointo charge. Sqm 205.32 205.32 270.0 False None None False None False 55436.4 0 3579275 130156 None Item 8.40 Ground Floor Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineertointocharge. Sqm 135.7 135.7 14.0 False None None False None False 1899.8 0 3579276 130156 None Item 8.38 Ground Floor Painting with oil type wood preservative of approved brand and anufacture New work two coats to give an even shade including preparingthe surface after thorougly cleaning oil, grease, dirt and foreign matter,sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineertointocharge. Sqm 47.19 47.19 31.3 False None None False None False 1477.047 0 3579277 130156 None Item 12.62 Ground Floor Providing and fixing chromium plated brass handles of 100or125 mm with necessary screws etc. complete Nos 279.66 279.66 24.0 False None None False None False 6711.84 0 3579278 130156 None Item 12.58 Ground Floor Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete Nos 141.6 141.6 12.0 False None None False None False 1699.2 0 3579279 130156 None Item 12.8 Ground Floor Providing and fixing door latch with necessary screws etc complete.Bright finished brass latch Each 336.29 336.29 24.0 False None None False None False 8070.96 0 3579280 130156 None Item 12.63 Ground Floor Providing and fixing aluminium tower bolts, ISI marked, anodised anto odic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade, with necessary screws etc. complete Each 153.4 153.4 24.0 False None None False None False 3681.6 0 3579281 130156 None Item 8.16.2 Ground Floor Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gorm2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for payment Plaster mesh 150mm wide. m 44.84 44.84 309.0 False None None False None False 13855.56 0 3579282 130156 None Item Approved Rate HWC Ground Floor Providing RCC loft atta 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete exclusive of cost of steel and fabrication charges. Sqm 506.22 506.22 7.1 False None None False None False 3594.162 0 3579283 130156 None Item Approved Rate HWC Ground Floor Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas and parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. m 86.14 86.14 39.4 False None None False None False 3393.916 0 3579284 130156 None Item 1.15.2 Sump and Septic Tank Earth work excavation for Foundation by mechanical means for all works anddepth upto 3 m, as per drawing and technical specifications, including settingout, shoring, strutting, barricading, caution lights, including dressing ofexcavated surfaces, disposing off or levelling the xcavated earth or sortingand stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work In ordinaryor soft rock without blasting Depth exceeding 1.5 m, but not exceeding 3 m Cum 501.5 501.5 24.76 False None None False None False 12417.14 0 3579285 130156 None Item 15.6 Sump and Septic Tank Food Graded Water Proofing Membrane Providing and laying water proofing treatment to the Water tanks and Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50percentapplied at 1.5 kgorm2 for internal side waterproofing in two layers with waiting period of 4to6 hrs per layer and food grade epoxy coating in twocoats certified by CFTRI Mysuru, including surface preparation completelyas per specification. Sqm 598.26 598.26 59.0 False None None False None False 35297.34 0 3579286 130156 None Item 18.3 Sump and Septic Tank Conveying the new CI or RCC machinehole frame and cover of 2 CMTS from divisional stores to the workspot and fixing the same in cement concrete and removing the old frame and cover and conveying back the old ones to stores. Nos 2315.16 2315.16 3.0 False None None False None False 6945.48 0 3579287 130156 None Item 2.5.2 FF COLUMNS Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 70% for Centering and Shuttering. Cum 13864.33 13864.33 3.4 False None None False None False 47138.722 0 3579288 130156 None Item 2.5.2 FF RCC BEAMS Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 60% for Centering and Shuttering. Cum 13048.78 13048.78 4.55 False None None False None False 59371.949 0 3579289 130156 None Item 2.5.2 FF RCC SLAB Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 50% for Centering and Shuttering. Cum 12233.23 12233.23 12.0 False None None False None False 146798.76 0 3579290 130156 None Item 2.5.2 FF LINTELS Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 60% for Centering and Shuttering. Cum 13048.78 13048.78 2.5 False None None False None False 32621.95 0 3579291 130156 None Item 2.5.1 FF RCC For Chajja Providing and laying in position Cement Concrete for all Super structures ofbuilding , Road works, Water works, Irrigation works and super structure worksof bridges upto 3.50 m height. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed withsuper plasticisers laid in layers, well compacted using needle vibrators. Thecost includes all lead and lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as per technicalspecifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including 45% for Centering and Shuttering. Cum 11457.37 11457.37 0.4 False None None False None False 4582.948 0 3579292 130156 None Item 2.1.4 FFCill concrete Providing and laying in position Cement Concrete for levelling course forall works in foundation. The graniteortraporbasalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed, laid inlayers not exceeding 150 mm thickness, well compacted using plate vibrators,including all lead and lifts, cost of all materials of quality, labour, Usage charges ofmachinery, curing, and all the other appurtenances required to complete thework as per technical specifications. Mix 136 Using 20 mm nominal size graded crushed coarse aggregates Cum 7409.42 7409.42 2.1 False None None False None False 15559.782 0 3579293 130156 None Item 2.11a FF Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, lapingorwelding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings t 106614.85 106614.85 2.95 False None None False None False 314513.8075 0 3579294 130156 None Item Approved Rate HWC FF Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas and parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. m 87.0 87.0 29.0 False None None False None False 2523.0 0 3579295 130156 None Item 6.32 FFProviding and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgorm3and minimum compressive strength of 4.00 Normm2 conforming to IS2185 Part I 2005 and constr ucted with CM 14 as per IS 25722005including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Cum 1561.26 1561.26 197.0 False None None False None False 307568.22 0 3579296 130156 None Item 6.34 FF Providing and constructing load bearing wall with Solid Concrete blocksof size 400x100x200mm having block density more than 1800kgorm3and minimum compressive strength of 4.00 Normm2 conforming to IS2185 Part I 2005 and constructed with CM 14 as per IS 25722005including cost of all materials, labour, scaffolding and curing, usagecharges of machinery etc complete as per specifications. Sqm 1315.75 1315.75 43.5 False None None False None False 57235.125 0 3579297 130156 None Item 12.13.1 FF Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps, but including cost of materials, labour, usage charges complete as per specifications. Cum 117767.71 117767.71 0.3 False None None False None False 35330.313 0 3579298 130156 None Item 12.51 FF Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 136 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1210.87 1210.87 4.0 False None None False None False 4843.48 0 3579299 130156 None Item 10.6 FFProviding and fixing expansion hold fasteners on C.C. orR.C.C.orBrick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Each 58.39 58.39 4.0 False None None False None False 233.56 0 3579300 130156 None Item 12.75.4 FF Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 100x70x4 mm ordinary type Each 166.85 166.85 18.0 False None None False None False 3003.3 0 3579301 130156 None Item 12.57.6 FF Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 partI 1991. from manufacturer complete as per spcification.do 35 mm thick both side commercial. Sqm 3959.16 3959.16 8.0 False None None False None False 31673.28 0 3579302 130156 None Item 12.86 FF Providing and fixing of 2track x 2panel sliding windows made out of multichambered UPVC Matching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardwareand single point locking system with touch lock. Wall thickness of frame and sash shall be of 1.8+0.2 mm. Maximum possible size 1519mm x 1519mm. The cost is inclusive of all fixtures and separate charges for minor TandP's shall not be made Sqm 6423.8 6423.8 12.42 False None None False None False 79783.596 0 3579303 130156 None Item 11.34A FF Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Kg 200.22 200.22 333.0 False None None False None False 66673.26 0 3579304 130156 None Item 12.54 FF SOLID PVC Door Frame Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and joined 2 No.s of 150mm long brackets of 15x15mm M.S. Square tube, the entire door frame to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65or80mm size complete as per manufacturers specification and direction of Engineerincharge. m 378.99 378.99 10.0 False None None False None False 3789.9 0 3579305 130156 None Item 12.53 FF Solid panel prelam pvc door shutter. Providing and fixing 30mm thick factory made rigid foam Prelam panelled Door Shutters made from M.S. Tube of 19x19mm, 19 guage for styles and 15x15mm for top and bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet and 30x50mm wide to form styles and 5mm thick and 75mm wide Prelaminated PVC Sheets for top rail, lock rail and bottom rail on either side and 5mm thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the styles and rails with PVC Designer beading on either side and joined together with solvent cement adhesive etc., complete as per manufacturers specification and direction of Engineerincharge fixed to frames with 3 nos of 75 mm. Aluminium hinges. with one side prelam Sqm 1892.57 1892.57 3.2 False None None False None False 6056.224 0 3579306 130156 None Item 8.10 FF Providing 6 mm cement plaster with cement mortar 13 1 cement 3fine sand on concrete surface or ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. Sqm 251.47 251.47 78.0 False None None False None False 19614.66 0 3579307 130156 None Item 8.1.1 FF Providing 12 mm cement plaster with cement mortar 14 1 cement 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. Inside Sqm 303.91 303.91 234.5 False None None False None False 71266.895 0 3579308 130156 None Item 8.51 FF Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 119.18 119.18 311.0 False None None False None False 37064.98 0 3579309 130156 None Item 8.80 FF Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 15 1 cement 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mortar 16 1 cement 6 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. Sqm 442.16 442.16 248.0 False None None False None False 109655.68 0 3579310 130156 None Item 8.2.1 FF Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 14 1 cement 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. Sqm 351.58 351.58 25.704 False None None False None False 9037.01232 0 3579311 130156 None Item 8.16.2 FF Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gorm2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for payment Plaster mesh 150mm wide m 45.28 45.28 120.59 False None None False None False 5460.3152 0 3579312 130156 None Item 7.18 FF Providing and laying cinder concrete in cement 115 1 cement 15 cinder of 12.5mm nominal gauge on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Cum 2403.86 2403.86 1.52 False None None False None False 3653.8672 0 3579313 130156 None Item 15.7 FF Integral Crystalline Water Proofing Admixture Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, selfseal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width and resist hydrostatic pressure upto 16bar for both positive and negative pressure confirming to DIN 1048 part 5 for 56percent reduction in depth of penetrationagainst control, resistance to chloride penetration confirming to ASTM C 1202 with 64percent improvement against control and protecting steel reinforcement against corrosion mixed at 1percent by weight of cementitiouscontent in concrete. ie., integral crystaline waterproofing admix at 0.5kgorbag of cement. For calculation purpose 320 kg of Cement for M20 grade of Concrete is considered in the analysis Sqm 732.96 732.96 11.16 False None None False None False 8179.8336 0 3579314 130156 None Item 9.21.2 FF Providing and laying Vitrified tiles in floor with different sizes thickness to be specified by the manufacturer, with water absorption less than 0.08percent and conforming to IS15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive water based conforming to IS 15477, in average 6 mm thickness, including grouting of joints Payment for grouting of joints to be made separately.Size of Tile 600x600 mm Sqm 1475.45 1475.45 57.0 False None None False None False 84100.65 0 3579315 130156 None Item 9.11 FF Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer, of 1st quality conforming to IS 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 14 1 Cement 4 Coarse sand, jointing with grey cement slurry at 3.3 kgor m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1059.51 1059.51 6.2 False None None False None False 6568.962 0 3579316 130156 None Item 9.38 FF Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 13 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1658.98 1658.98 25.704 False None None False None False 42642.42192 0 3579317 130156 None Item 9.36 FF Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 16, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1966.47 1966.47 2.69 False None None False None False 5289.8043 0 3579318 130156 None Item 9.23 FF Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm average thick base of cement mortar 14 1 cement 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the EngineerinCharge Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 2938.97 2938.97 3.25 False None None False None False 9551.6525 0 3579319 130156 None Item 8.39 FFWall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. Sqm 151.36 151.36 234.0 False None None False None False 35418.24 0 3579320 130156 None Item 8.30 FF Finishing walls with Acrylic Smooth exterior paint of required shade Newwork Two coat applied at 1.67Lor10 m² over and including priming coat ofexterior primer applied at 2.20 kgor10 m² with paint of approved qualityto give an even shade, after thoroughly brooming the surface to remove alldirt, dust, mortar drops and foreign matter including preparing the surfaceeven and sand paper smooth, cost of materials, labour complete as perspecifications and as per directions of Engineerincharge Sqm 207.37 207.37 248.0 False None None False None False 51427.76 0 3579321 130156 None Item 8.40 FF Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. Sqm 137.05 137.05 12.5 False None None False None False 1713.125 0 3579322 130156 None Item 8.38 FF Painting with oil type wood preservative of approved brand and anufacture New work two coats to give an even shade including preparingthe surface after thorougly cleaning oil, grease, dirt and foreign matter,sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. Sqm 47.67 47.67 19.2 False None None False None False 915.264 0 3579323 130156 None Item 12.62 FF Providing and fixing chromium plated brass handles of 100or125 mm with necessary screws etc. complete No 282.45 282.45 12.0 False None None False None False 3389.4 0 3579324 130156 None Item 12.58 FF Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete No 143.01 143.01 6.0 False None None False None False 858.06 0 3579325 130156 None Item 12.8 FF Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch. No 339.66 339.66 12.0 False None None False None False 4075.92 0 3579326 130156 None Item 12.63 FF Providing and fixing aluminium tower bolts, ISI marked, anodised an odic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade, with necessary screws etc. complete No 154.93 154.93 12.0 False None None False None False 1859.16 0 3579327 130156 None Item Approved Rate HWC FF Providing RCC loft atta 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete exclusive of cost of steel and fabrication charges. Sqm 511.28 511.28 14.25 False None None False None False 7285.74 0 3579328 130156 None Item 15.1 FF Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terraceorChajjasorSunken portion of WCBathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400percent and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6 kgorm2 to achieve final DFT Dry Film Thickness of 1mm including prime coat of epoxy primer at150 gorm2 and protection with 120gsm Geotextile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 973.7 973.7 132.0 False None None False None False 128528.4 0 3579329 130156 None Item 14.2.1 Providing and fixing white vitreous china pedestal type water closet European type W.C. pan with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device handle lever, conforming to IS 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid Each 5708.84 5708.84 1.0 False None None False None False 5708.84 0 3579330 130156 None Item 14.1.1 Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device handle lever conforming to IS 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5763.12 5763.12 2.0 False None None False None False 11526.24 0 3579331 130156 None Item 14.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Each 3381.88 3381.88 2.0 False None None False None False 6763.76 0 3579332 130156 None Item 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make and as per the direction of Engineer incharge. Each 955.8 955.8 5.0 False None None False None False 4779.0 0 3579333 130156 None Item 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge. Each 6563.16 6563.16 1.0 False None None False None False 6563.16 0 3579334 130156 None Item 14.10.1.2 Providing and fixing Stainless Steel A ISI 304 18or8 kitchen sink as per IS13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm bowl depth 225 mm Each 6363.74 6363.74 1.0 False None None False None False 6363.74 0 3579335 130156 None Item 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P.brass trap with necessary C.P. brass unions complete, including painting offittings and brackets, cutting and making good the wall wherever required Size600x450x200 mm Each 5996.75 5996.75 1.0 False None None False None False 5996.75 0 3579336 130156 None Item 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 55.46 55.46 5.0 False None None False None False 277.3 0 3579337 130156 None Item 13.23.5 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P.or H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 g No 1585.92 1585.92 1.0 False None None False None False 1585.92 0 3579338 130156 None Item 13.59 Providing and fixing PVC S.W.R Nahani Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete Each 259.59 259.59 5.0 False None None False None False 1297.95 0 3579339 130156 None Item 14.36.2 Providing and fixing PTMT Waste Coupling for wash basin and sink,of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms Each 109.74 109.74 5.0 False None None False None False 548.7 0 3579340 130156 None Item 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia Each 108.56 108.56 15.0 False None None False None False 1628.4 0 3579341 130156 None Item 14.40.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. Each 564.04 564.04 2.0 False None None False None False 1128.08 0 3579342 130156 None Item 13.25 Providing and fixing PTMT swivelling shower, 15 mm nominal bore,weighing not less than 40 gms No 172.28 172.28 2.0 False None None False None False 344.56 0 3579343 130156 None Item T090 SR 202122 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make includingtrench excavation and refilling etc. for EXTERNAL WORKS with 50mm nominal bore pipes m 164.02 164.02 15.0 False None None False None False 2460.3 0 3579344 130156 None Item 166 C.P. Brass stop cock concealed 15 mm No 619.5 619.5 4.0 False None None False None False 2478.0 0 3579345 130156 None Item 163 Brass bibcock 15 mm dia No 531.0 531.0 2.0 False None None False None False 1062.0 0 3579346 130156 None Item Approved Rate HWC Air Vent Cowel 110mm No 118.0 118.0 2.0 False None None False None False 236.0 0 3579347 130156 None Item Approved Rate HWC Supplying, installing, testing and commissioning approved make Submersible Pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller with cabling between hePumps, control panel, UGR and OHT etc.,. complete.approx. Length of cable = 80. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter,.3 no. working and 1no. Standby Sump To OHT DOMESTIC 2HP at 35m head SUMP TO OHTDOMESTIC WATER PUMPS For water sump Each 17700.0 17700.0 1.0 False None None False None False 17700.0 0 3579348 130156 None Item 10.1.5 Supplying PVC ringtite pipes conforming to IS 49852000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc 75 mm dia, 6 kgorsqcm and class 3 m 259.59 259.59 25.0 False None None False None False 6489.75 0 3579349 130156 None Item 10.1.6 Supplying PVC ringtite pipes conforming to IS 49852000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc 90 mm dia,6 kgorsqcm and class 3 m 346.92 346.92 50.0 False None None False None False 17346.0 0 3579350 130156 None Item 10.1.7 Supplying PVC ringtite pipes conforming to IS 49852000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc 110mm dia,6 kgorsqcm and class 3 m 484.98 484.98 60.0 False None None False None False 29098.8 0 3579351 130156 None Item 10.1.8 Supplying PVC ringtite pipes conforming to IS 49852000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc 140mm dia,6 kgorsqcm and class 3 m 689.12 689.12 20.0 False None None False None False 13782.4 0 3579352 130156 None Item 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, iorc fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 15 mm dia m 364.62 364.62 18.0 False None None False None False 6563.16 0 3579353 130156 None Item 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, iorc fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 20mm dia m 447.22 447.22 32.0 False None None False None False 14311.04 0 3579354 130156 None Item 13.33.1 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.External work 15 mm dia m 195.88 195.88 30.0 False None None False None False 5876.4 0 3579355 130156 None Item 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.External work 25 mm dia m 256.06 256.06 45.0 False None None False None False 11522.7 0 3579356 130156 None Item 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.External work40 mm dia m 562.86 562.86 15.0 False None None False None False 8442.9 0 3579357 130156 None Item 13.48 Providing and fixing on wallafce unplasticised rigid PVC rain water pipes confirming to IS 13592 Type A, Including jointing with seal ring confirming to IS 5382 Leaving 10mm gap thermal expansion, i Single socketed pipes 100 mm dia m 343.38 343.38 45.0 False None None False None False 15452.1 0 3579358 130156 None Item Approved Rate HWC Drilling holes of 2.50 cms dia rooforchajjaorstone. in slabs upto 10 cms thick No 185.26 185.26 22.0 False None None False None False 4075.72 0 3579359 130156 None Item 13.34 Providing and placing on terrace, at all floor levels polythylene water storage tanks as per IS 12701 marked, with cover and suitable locking arrangements, making necessary holes for inlet,outlet and over flow pipes, but without fitting and basesupport fot tank l 10.62 10.62 1000.0 False None None False None False 10620.0 0 3579360 130156 None Item 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm inner dimensions with modular bricks of CD 75in cement mortar 16, bed concrete 150mm thick with 136, plastering 12 mm thick with cement mortar 14, CC 124 coping 75mm thk for fixing CI cover and frame etc. excluding the cost of CI frame and cover Each 5653.38 5653.38 5.0 False None None False None False 28266.9 0 3579361 130156 None Item 1.5.1 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works,as per drawing and technical specifications, including setting out, shoring,strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting and stacking theselected stuff for reuse in a radius of 50 m and lift upto 1.5 m including costof labour, tools, usage and other appurtenances required to complete the work.In ordinaryorsoft rock without blasting upto 1.5 m depth Drain Pipe To Public Drain Cum 352.82 352.82 5.94 False None None False None False 2095.7508 0 3579362 130156 None Item 1.9 Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 mand lift upto 1.5 m. Cum 313.88 313.88 5.94 False None None False None False 1864.4472 0 3579363 130156 None Item 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit orcasing capping using 2x1.5Sqmm Phase & Neutral & 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS694 and latest amendments without control switch shall be fixed on the existing plastic sheetorgang box, the other end of the wires shall be terminated with sufficient loose length in a woodorPVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch Point 317.42 317.42 18.0 False None None False None False 5713.56 0 3579364 130156 None Item 2.2.2 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit orcasing capping using 2x1.5Sqmm (Phase & Neutral & 1x1.0 sqmm (Earth wire FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments without control switch shall be fixed on the existing plastic sheetorgang box, the other end of the wires shall be terminated with sufficient loose length in a woodorPVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch Point 447.22 447.22 30.0 False None None False None False 13416.6 0 3579365 130156 None Item 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit orcasing capping using 2x1.5Sqmm (Phase & Neutral & 1x1.0 sqmm (Earth wire FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments without control switch shall be fixed on the existing plastic sheetorgang box, the other end of the wires shall be terminated with sufficient loose length in a woodorPVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch Point 654.9 654.9 15.0 False None None False None False 9823.5 0 3579366 130156 None Item 3.4.1 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 12Way Each 162.84 162.84 6.0 False None None False None False 977.04 0 3579367 130156 None Item 3.4.2 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 3 way Each 187.62 187.62 2.0 False None None False None False 375.24 0 3579368 130156 None Item 3.4.3 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 45Way Each 208.86 208.86 2.0 False None None False None False 417.72 0 3579369 130156 None Item 3.4.4 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 6Way Each 259.59 259.59 10.0 False None None False None False 2595.9 0 3579370 130156 None Item 3.4.5 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 8 Way Each 307.97 307.97 6.0 False None None False None False 1847.82 0 3579371 130156 None Item 3.4.6 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 1012Way Each 376.42 376.42 2.0 False None None False None False 752.84 0 3579372 130156 None Item 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box.12 Module Each 161.66 161.66 6.0 False None None False None False 969.96 0 3579373 130156 None Item 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box.3 Module Each 189.98 189.98 2.0 False None None False None False 379.96 0 3579374 130156 None Item 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box.4 Module Each 206.5 206.5 2.0 False None None False None False 413.0 0 3579375 130156 None Item 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box.6 Module Each 276.12 276.12 10.0 False None None False None False 2761.2 0 3579376 130156 None Item 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box.8 Module Each 335.12 335.12 6.0 False None None False None False 2010.72 0 3579377 130156 None Item 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box.1012Module Each 405.92 405.92 2.0 False None None False None False 811.84 0 3579378 130156 None Item 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch Each 120.36 120.36 50.0 False None None False None False 6018.0 0 3579379 130156 None Item 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3579380 130156 None Item 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket Each 201.78 201.78 10.0 False None None False None False 2017.8 0 3579381 130156 None Item 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push Each 208.86 208.86 2.0 False None None False None False 417.72 0 3579382 130156 None Item 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3579383 130156 None Item 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each 384.68 384.68 6.0 False None None False None False 2308.08 0 3579384 130156 None Item 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6or16Amps universal socket Each 278.48 278.48 6.0 False None None False None False 1670.88 0 3579385 130156 None Item 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TVorTelephone socket Each 184.08 184.08 2.0 False None None False None False 368.16 0 3579386 130156 None Item 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell Each 290.28 290.28 1.0 False None None False None False 290.28 0 3579387 130156 None Item 1.13 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Supplying and Fixing Metal Fan Box with Round Hook. Each 138.06 138.06 12.0 False None None False None False 1656.72 0 3579388 130156 None Item 1.2.1 Concealed Conduit System Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalorPVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2or2 19or20mm dia 2mm thick m 77.88 77.88 175.0 False None None False None False 13629.0 0 3579389 130156 None Item 1.2.2 Concealed Conduit System Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalorPVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2or2 25mm dia 2mm thick m 92.04 92.04 120.0 False None None False None False 11044.8 0 3579390 130156 None Item 1.3.1 Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalorPVC junction boxes adhesive paste etc, by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19or20mm dia 2mm thick m 80.24 80.24 175.0 False None None False None False 14042.0 0 3579391 130156 None Item 1.3.2 Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalorPVC junction boxes adhesive paste etc, by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick m 93.22 93.22 120.0 False None None False None False 11186.4 0 3579392 130156 None Item 2.3.2 WIRING FOR LightingorPower Circuits Wiring for lightingorpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latestamendments.1.5 sqmm m 30.68 30.68 350.0 False None None False None False 10738.0 0 3579393 130156 None Item 2.3.3 WIRING FOR LightingorPower Circuits Wiring for lightingorpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latestamendments.2.5 sqmm m 49.56 49.56 450.0 False None None False None False 22302.0 0 3579394 130156 None Item 2.3.4 WIRING FOR LightingorPower Circuits Wiring for lightingorpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latestamendments.4 sqmm m 74.34 74.34 190.0 False None None False None False 14124.6 0 3579395 130156 None Item 5.19.9 MCB DB Supplying and fixing regular MCB distribution boards on wallor wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II Double Door 12 Way SP & N Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3579396 130156 None Item 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 632Amps SP Each 489.7 489.7 12.0 False None None False None False 5876.4 0 3579397 130156 None Item 5.20.1 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB240or450V upto 300mA sensitivity on existing woodor panel board. Board 1625 Amps 2 pole Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3579398 130156 None Item 11.3.2 Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70percent lumen maintenance with CRI 80. Power Input 220240V at 50or60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4' 20or22 w Each 814.19 814.19 15.0 False None None False None False 12212.85 0 3579399 130156 None Item 11.11.3 Supplying and fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70percent. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322orIEC 60598, LM 79 LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5percent of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20percent, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABLorCPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K Each 175.82 175.82 4.0 False None None False None False 703.28 0 3579400 130156 None Item 11.11.7 Supplying and fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70percent. efficacy 80 lumen per watt, life25000 burning hours and Compliance to IS 10322orIEC 60598, LM 79 LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5percent of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20percent, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABLorCPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K Each 502.68 502.68 6.0 False None None False None False 3016.08 0 3579401 130156 None Item 12.27 LED Street light.Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply No 61.36 61.36 2.0 False None None False None False 122.72 0 3579402 130156 None Item 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12 size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 1760.56 1760.56 4.0 False None None False None False 7042.24 0 3579403 130156 None Item 6.3.1 Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball bearing system. 48" Sweep (1200mm Regular model Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3579404 130156 None Item 12.46 Supplying & Fixing of 70150 Watts lamp holder 2 Pin Each 74.34 74.34 22.0 False None None False None False 1635.48 0 3579405 130156 None Item 13.7.1 Fixing all types and all capacities of fluorescent or false ceiling or spot light or CFL or LED fittings indoor on the wall or ceiling or rafters or girders using 23or0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall or ceiling or Rafter or Girders Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3579406 130156 None Item 13.11 Fixing a ceiling or wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 or 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 371.7 371.7 12.0 False None None False None False 4460.4 0 3579407 130156 None Item 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 or 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 834.26 834.26 3.0 False None None False None False 2502.78 0 3579408 130156 None Item 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3579409 130156 None Item BSR 32.07 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS1554 (Part 1 or IS7098 Part1, Armouring strip thickness and resistivity as per IS3975 3.5 core 25 sqmm Km 164667.82 164667.82 0.065 False None None False None False 10703.4083 0 3579410 130156 None Item 21.05 Laying of cable in Existing TrenchorGI pipeorStone WareorRCC Hume pipe using WoodenorAluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm Km 24645.48 24645.48 0.065 False None None False None False 1601.9562 0 3579411 130156 None Item 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1KV class metal only 1920 SR 32mm dia No 143.96 143.96 10.0 False None None False None False 1439.6 0 3579412 130156 None Item 6.17.5 Supplying tinned copper lugs and crimping andwiring to terminal point for wire of the following sizes 1920SR10 sqmm No 9.44 9.44 8.0 False None None False None False 75.52 0 3579413 130156 None Item BSR 29.03 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 Mtr wherever necessary as directedIn ordinary soil Cum 306.8 306.8 30.0 False None None False None False 9204.0 0 3579414 130156 None 5.42.1 Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 14SWG Sq CM 0.59 0.59 30000.0 False None None False None False 17700.0 0 3579415 130156 None Item 5.40.3 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolici FRPorDMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 400 A 4 x 50 x 10 mm Aluminium Strips m 5245.09 5245.09 1.5 False None None False None False 7867.635 0 3579416 130156 None Item 5.41.3 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint75x75x6mm m 654.9 654.9 5.0 False None None False None False 3274.5 0 3579417 130156 None Item 13.5 Fixing halogenormetal halide or SVL or IL or LED floodlight fitting over existing pole or wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 191.16 191.16 2.0 False None None False None False 382.32 0 3579418 130156 None Item 7.1.2 Supplying litres capacity verticalorhorizontal type wall mounting Electrical water heater with 22 SWG copperorSS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40or0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. 15Litres Each 10342.69 10342.69 1.0 False None None False None False 10342.69 0 3579419 130156 None Item 5.42.1 Meetering Panel Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 14SWG Sq CM 0.59 0.59 30000.0 False None None False None False 17700.0 0 3579420 130156 None Item 5.40.1 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPorDMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips m 2908.7 2908.7 2.0 False None None False None False 5817.4 0 3579421 130156 None Item 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel m 892.08 892.08 2.0 False None None False None False 1784.16 0 3579422 130156 None Item 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 632Amps DP Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3579423 130156 None Item 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 5063Amps TPN Each 1300.36 1300.36 1.0 False None None False None False 1300.36 0 3579424 130156 None Item 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing woodenorpanel using necessary nuts, bolts and washers 32Amps Each 284.38 284.38 3.0 False None None False None False 853.14 0 3579425 130156 None Item 5.7.3 Supplying & fixing of Porcelain fuse channel with cut out on existing woodenorpanel using necessary nuts, bolts and washers 63Amps Each 473.18 473.18 1.0 False None None False None False 473.18 0 3579426 130156 None Item 5.12.1 Supplying of on load change over switches 4 poles, AC23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution 63Amps Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3579427 130156 None Item 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter Each 236.0 236.0 1.0 False None None False None False 236.0 0 3579428 130156 None Item 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter Each 188.79 188.79 1.0 False None None False None False 188.79 0 3579429 130156 None Item 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3579430 130156 None Item 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12or24v D.C 48or6.36 Each 607.69 607.69 2.0 False None None False None False 1215.38 0 3579431 130156 None Item 5.34 Supplying, fixing and wiring 50or5 to 400or5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound 48or6.32 Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3579432 130156 None Item 5.30 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class1 Accuracy with Temper Proof Energy Meter Each 1628.39 1628.39 2.0 False None None False None False 3256.78 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1721643738000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1721643738000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1721643738000 1 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste category as prescribed in the tender document. None 1721643738000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1721643738000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1721643797000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end None 1721643806000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1721643815000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs None 1721643823000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1721643833000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1721643907000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1721643918000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1721643933000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1721643945000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1721643959000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid None 1721643968000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1721644013000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM ( Monday to Saturday) Ph No: 91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time. None 1721644030000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1721644062000 0 None None ELIGIBILITY Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work None 1721644072000 0 None None ELIGIBILITY Tenderer should have latest GST Registration and latest clearance certificate in their name None 1721644079000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be inclusive of GST. None 1721644088000 0 None None ELIGIBILITY Special Instructions to tenderers - as per bid document. None 1721644097000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work. None 1721644104000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2019-20, 2020-21 2021-22, 2022-23 & 2023-24. None 1721644115000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive. None 1721644124000 0 None None ELIGIBILITY The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b)(c)(d)and (e). None 1721644132000 0 None None ELIGIBILITY As per GO No:FD-CAM/16/2022 (P-2) dated 22nd August 2022 , Banker Certificate / Line of credit shall be uploaded in the format mentioned in the SECTION -11 as per bid document None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Clause ITT 3.2(a): To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been achieved in at least one financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs. 61.00 Lakhs. Note : a) For Clause 3.2 (a) the certificate duly certified by the charted accountant is to be submitted Past Experience None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been Satisfactorily completed at least any construction work of value not less than Rs. 15.25 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs. 1.50 Lakhs in any one year (2019-20 to 2023-24) .Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d). The letter of willingness of the sub contractor to be engaged for electrical works should be obtained and uploaded in the e-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs. 1.00 Lakhs in any one year (2019-20 to 2023-24). Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e). The letter of willingness of the sub contractor to be engaged for water Supply works should be obtained and uploaded in the e-portal Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24). Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1 PCC/RCC 104.00 Cum 2 TMT Steel 8.70 T, 3 Plastering 1170.00 Sqm, 4 Flooring 198.00 Sqm 5 Painting 1015.00 Sqm. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (c). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None KPWD Class-III & above Registration Certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- PWD Registration certificate None None None None Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs. 18.30 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid KPWD Class III & above Registration Certificate True Technical Bid SC Reserved Category Certificate True Technical Bid GST Registration True Technical Bid Work done certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None