| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1721714040000 | 0 | None | None | Buildings | HWC Hadli A Civil Works | 5837543.82 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3588166 | 130481 | None | Item 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 120.36 | 120.36 | 679.61 | False | None | None | False | None | False | 81797.8596 | 0 | | 3588167 | 130481 | None | Item 1.8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work | Cum | 559.32 | 559.32 | 644.85 | False | None | None | False | None | False | 360677.502 | 0 | | 3588168 | 130481 | None | Item 5.4 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 7539.02 | 7539.02 | 3.8 | False | None | None | False | None | False | 28648.276 | 0 | | 3588169 | 130481 | None | Item 2.1.4 | PCC : Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in
layers not exceeding 150 mm thickness, well compacted using plate vibrators,
including all lead & lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7336.06 | 7336.06 | 21.7145 | False | None | None | False | None | False | 159298.87487 | 0 | | 3588170 | 130481 | None | Item 2.2.1 | FOOTINGS : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.( Including formwork charges -8%) | Cum | 8012.15 | 8012.15 | 20.0 | False | None | None | False | None | False | 160243.0 | 0 | | 3588171 | 130481 | None | Item 2.5.2 | COLUMNS : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Including formwork charges -70%) | Cum | 13726.94 | 13726.94 | 6.5 | False | None | None | False | None | False | 89225.11 | 0 | | 3588172 | 130481 | None | Item 2.5.2 | TIE BEAM & PLINTH BEAM : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Including formwork charges -60%) | Cum | 12919.58 | 12919.58 | 13.0 | False | None | None | False | None | False | 167954.54 | 0 | | 3588173 | 130481 | None | Item 2.5.2 | LINTEL & ROOF BEAM : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Including formwork charges -60%) | Cum | 12919.58 | 12919.58 | 9.5 | False | None | None | False | None | False | 122736.01 | 0 | | 3588174 | 130481 | None | Item 2.5.2 | RCC SLAB :Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Including formwork charges -50%) | Cum | 12112.11 | 12112.11 | 13.5 | False | None | None | False | None | False | 163513.485 | 0 | | 3588175 | 130481 | None | Item 2.5.2 | RCC STAIRCASE : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Including formwork charges -45%) | Cum | 11708.37 | 11708.37 | 5.5 | False | None | None | False | None | False | 64396.035 | 0 | | 3588176 | 130481 | None | Item 2.5.2 | RCC For Chajja : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Including formwork charges -45%) | Cum | 11708.37 | 11708.37 | 0.6 | False | None | None | False | None | False | 7025.022 | 0 | | 3588177 | 130481 | None | Item 1.8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work | Cum | 559.32 | 559.32 | 55.0 | False | None | None | False | None | False | 30762.6 | 0 | | 3588178 | 130481 | None | Item 2.1.4 | Cill Concrete : Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7336.06 | 7336.06 | 1.5 | False | None | None | False | None | False | 11004.09 | 0 | | 3588179 | 130481 | None | Item 2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and
technical specification:Buildings | Tonne | 105559.26 | 105559.26 | 8.104 | False | None | None | False | None | False | 855452.24304 | 0 | | 3588180 | 130481 | None | Item 6.32 | Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1545.8 | 1545.8 | 202.0 | False | None | None | False | None | False | 312251.6 | 0 | | 3588181 | 130481 | None | Item 6.34 | Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x100x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS
2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005
including cost of all materials, labour, scaffolding and curing, usage
charges of machinery etc complete as per specifications. | Sqm | 1302.72 | 1302.72 | 39.5 | False | None | None | False | None | False | 51457.44 | 0 | | 3588182 | 130481 | None | Item 12.13.1 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 116601.7 | 116601.7 | 0.5 | False | None | None | False | None | False | 58300.85 | 0 | | 3588183 | 130481 | None | Item 12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | Nos | 1198.88 | 1198.88 | 7.0 | False | None | None | False | None | False | 8392.16 | 0 | | 3588184 | 130481 | None | Item 444 | Providing & Fixing of Hold fast MS to wall including cost of materials, labour charges, complete as per specifications.Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications. | Nos | 59.0 | 59.0 | 42.0 | False | None | None | False | None | False | 2478.0 | 0 | | 3588185 | 130481 | None | Item 12.57.6 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side commercial. | Sqm | 3919.96 | 3919.96 | 15.0 | False | None | None | False | None | False | 58799.4 | 0 | | 3588186 | 130481 | None | Item 12.86 | Providing & fixing of 2-track x 2-panel sliding windows made out of multichambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) | Sqm | 6360.2 | 6360.2 | 14.0 | False | None | None | False | None | False | 89042.8 | 0 | | 3588187 | 130481 | None | Item 11.34A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | Kg | 198.24 | 198.24 | 295.0 | False | None | None | False | None | False | 58480.8 | 0 | | 3588188 | 130481 | None | Item 12.54 | SOLID PVC Door Frame Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & joined 2 No.s of 150mm long brackets of 15x15mm M.S. Square tube, the entire door frame to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. | Rmtr | 375.24 | 375.24 | 10.0 | False | None | None | False | None | False | 3752.4 | 0 | | 3588189 | 130481 | None | Item 12.53 | Solid panel prelam pvc door shutter. Providing and fixing 30mm thick factory made rigid foam Prelam panelled Door Shutters made from M.S. Tube of 19x19mm, 19 guage for styles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form styles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the styles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm. Aluminium hinges. with one side prelam | Sqm | 1873.84 | 1873.84 | 3.15 | False | None | None | False | None | False | 5902.596 | 0 | | 3588190 | 130481 | None | Item 8.10 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 248.98 | 248.98 | 86.0 | False | None | None | False | None | False | 21412.28 | 0 | | 3588191 | 130481 | None | Item 8.1.1 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside) | Sqm | 300.9 | 300.9 | 431.0 | False | None | None | False | None | False | 129687.9 | 0 | | 3588192 | 130481 | None | Item 8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. | Sqm | 118.0 | 118.0 | 517.0 | False | None | None | False | None | False | 61006.0 | 0 | | 3588193 | 130481 | None | Item 8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Out side) | Sqm | 437.78 | 437.78 | 270.0 | False | None | None | False | None | False | 118200.6 | 0 | | 3588194 | 130481 | None | Item 8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 348.1 | 348.1 | 33.5 | False | None | None | False | None | False | 11661.35 | 0 | | 3588195 | 130481 | None | Item 15.7 | Integral Crystalline Water Proofing Admixture Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetrationagainst control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel reinforcement against corrosion mixed @ 1% by weight of cementitiouscontent in concrete. ie., integral crystaline waterproofing admix @ 0.5kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) | Sqm | 725.7 | 725.7 | 6.15 | False | None | None | False | None | False | 4463.055 | 0 | | 3588196 | 130481 | None | Item 9.21.2 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm | Sqm | 1460.84 | 1460.84 | 78.0 | False | None | None | False | None | False | 113945.52 | 0 | | 3588197 | 130481 | None | Item 9.23 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. | Sqm | 2909.87 | 2909.87 | 26.0 | False | None | None | False | None | False | 75656.62 | 0 | | 3588198 | 130481 | None | Item 9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 1049.02 | 1049.02 | 6.15 | False | None | None | False | None | False | 6451.473 | 0 | | 3588199 | 130481 | None | Item 9.38 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. | Sqm | 1642.56 | 1642.56 | 37.0 | False | None | None | False | None | False | 60774.72 | 0 | | 3588200 | 130481 | None | Item 9.36 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. | Sqm | 1947.0 | 1947.0 | 6.5 | False | None | None | False | None | False | 12655.5 | 0 | | 3588201 | 130481 | None | Item 11.26.1 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kg | 162.84 | 162.84 | 245.0 | False | None | None | False | None | False | 39895.8 | 0 | | 3588202 | 130481 | None | Item 8.39 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 149.86 | 149.86 | 517.0 | False | None | None | False | None | False | 77477.62 | 0 | | 3588203 | 130481 | None | Item 8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in- charge. | Sqm | 205.32 | 205.32 | 270.0 | False | None | None | False | None | False | 55436.4 | 0 | | 3588204 | 130481 | None | Item 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 135.7 | 135.7 | 14.0 | False | None | None | False | None | False | 1899.8 | 0 | | 3588205 | 130481 | None | Item 8.38 | Painting with oil type wood preservative of approved brand and anufacture :New work (two coats) to give an even shade including preparingthe surface after thorougly cleaning oil, grease, dirt and foreign matter,sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 47.2 | 47.2 | 31.3 | False | None | None | False | None | False | 1477.36 | 0 | | 3588206 | 130481 | None | Item 12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with
necessary screws etc. complete | Nos | 279.66 | 279.66 | 24.0 | False | None | None | False | None | False | 6711.84 | 0 | | 3588207 | 130481 | None | Item 12.58 | Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete | Nos | 141.6 | 141.6 | 12.0 | False | None | None | False | None | False | 1699.2 | 0 | | 3588208 | 130481 | None | Item 12.8 | Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch. | Each | 336.3 | 336.3 | 24.0 | False | None | None | False | None | False | 8071.2 | 0 | | 3588209 | 130481 | None | Item 12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete | Nos | 153.4 | 153.4 | 24.0 | False | None | None | False | None | False | 3681.6 | 0 | | 3588210 | 130481 | None | Item 8.16.2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 150mm wide. | Rmtr | 44.84 | 44.84 | 309.0 | False | None | None | False | None | False | 13855.56 | 0 | | 3588211 | 130481 | None | Item Least quotation rate | Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges). | Sqm | 506.22 | 506.22 | 7.1 | False | None | None | False | None | False | 3594.162 | 0 | | 3588212 | 130481 | None | Item Least quotation rate | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. | Rmtr | 86.14 | 86.14 | 39.4 | False | None | None | False | None | False | 3393.916 | 0 | | 3588213 | 130481 | None | Item 2.5.2 | FF COLUMNS : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Including Formwork-70% and lift charges-1% ) | Cum | 13864.32 | 13864.32 | 3.35 | False | None | None | False | None | False | 46445.472 | 0 | | 3588214 | 130481 | None | Item 2.5.2 | FF RCC BEAMS : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Including Formwork-60% and lift charges-1% ) | Cum | 13048.78 | 13048.78 | 4.55 | False | None | None | False | None | False | 59371.949 | 0 | | 3588215 | 130481 | None | Item 2.5.2 | FF RCC SLAB : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Including Formwork-50% and lift charges-1% ) | Cum | 12233.23 | 12233.23 | 12.0 | False | None | None | False | None | False | 146798.76 | 0 | | 3588216 | 130481 | None | Item 2.5.2 | FFLINTELS : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Including Formwork-60% and lift charges-1% ) | Cum | 13048.78 | 13048.78 | 2.5 | False | None | None | False | None | False | 32621.95 | 0 | | 3588217 | 130481 | None | Item 2.5.2 | FF Chejja : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Including Formwork-45% and lift charges-1% ) | Cum | 11825.45 | 11825.45 | 0.4 | False | None | None | False | None | False | 4730.18 | 0 | | 3588218 | 130481 | None | Item 2.1.4 | FF:Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates( Including lift charges-1% ) | Cum | 7409.42 | 7409.42 | 2.1 | False | None | None | False | None | False | 15559.782 | 0 | | 3588219 | 130481 | None | Item 2.11a | FF:Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and
technical specification:Buildings( Including lift charges-1% ) | Tonne | 106614.85 | 106614.85 | 2.95 | False | None | None | False | None | False | 314513.8075 | 0 | | 3588220 | 130481 | None | Least quotation rate | FF:Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge.( Including lift charges-1% ) | Rmtr | 59.59 | 59.59 | 29.0 | False | None | None | False | None | False | 1728.11 | 0 | | 3588221 | 130481 | None | Item 6.32 | FF:Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185 (Part - I) - 2005 and constr ucted with CM 1:4 as per IS 2572:2005including cost of all materials, labour, scaffolding and curing, usage
charges of machinery etc complete as per specifications.( Including lift charges-1% ) | Sqm | 1561.25 | 1561.25 | 197.0 | False | None | None | False | None | False | 307566.25 | 0 | | 3588222 | 130481 | None | Item 6.34 | FF:Providing and constructing load bearing wall with Solid Concrete blocksof size 400x100x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005including cost of all materials, labour, scaffolding and curing, usagecharges of machinery etc complete as per specifications.( Including lift charges-1% ) | Sqm | 1315.74 | 1315.74 | 43.5 | False | None | None | False | None | False | 57234.69 | 0 | | 3588223 | 130481 | None | Item 12.13.1 | FF:Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.( Including lift charges-1% ) | Cum | 117767.71 | 117767.71 | 0.3 | False | None | None | False | None | False | 35330.313 | 0 | | 3588224 | 130481 | None | Item 12.51 | FF:Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Including lift charges-1% ) | Nos | 1210.86 | 1210.86 | 4.0 | False | None | None | False | None | False | 4843.44 | 0 | | 3588225 | 130481 | None | Item 444 | FF:Providing & Fixing of Hold fast MS to wall including cost of materials, labour charges, complete as per specifications.Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.( Including lift charges-1% ) | Nos | 59.58 | 59.58 | 24.0 | False | None | None | False | None | False | 1429.92 | 0 | | 3588226 | 130481 | None | Item 12.57.6 | FF:Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side commercial.( Including lift charges-1% ) | Sqm | 3959.15 | 3959.15 | 7.98 | False | None | None | False | None | False | 31594.017 | 0 | | 3588227 | 130481 | None | Item 12.86 | FF:Providing & fixing of 2-track x 2-panel sliding windows made out of multichambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)( Including lift charges-1% ) | Sqm | 6423.8 | 6423.8 | 12.42 | False | None | None | False | None | False | 79783.596 | 0 | | 3588228 | 130481 | None | Item 11.34A | FF:Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. ( Including lift charges-1% ) | Kg | 200.22 | 200.22 | 333.0 | False | None | None | False | None | False | 66673.26 | 0 | | 3588229 | 130481 | None | Item 12.54 | FF:SOLID PVC Door Frame Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & joined 2 No.s of 150mm long brackets of 15x15mm M.S. Square tube, the entire door frame to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. ( Including lift charges-1% ) | Rmtr | 378.99 | 378.99 | 10.0 | False | None | None | False | None | False | 3789.9 | 0 | | 3588230 | 130481 | None | Item 12.53 | FF:Solid panel prelam pvc door shutter. Providing and fixing 30mm thick factory made rigid foam Prelam panelled Door Shutters made from M.S. Tube of 19x19mm, 19 guage for styles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form styles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the styles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm. Aluminium hinges. with one side prelam( Including lift charges-1% ) | Sqm | 1892.57 | 1892.57 | 3.2 | False | None | None | False | None | False | 6056.224 | 0 | | 3588231 | 130481 | None | Item 8.10 | FF:Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( Including lift charges-1% ) | Sqm | 251.46 | 251.46 | 77.1 | False | None | None | False | None | False | 19387.566 | 0 | | 3588232 | 130481 | None | Item 8.1.1 | FF:Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside)( Including lift charges-1% ) | Sqm | 303.9 | 303.9 | 234.5 | False | None | None | False | None | False | 71264.55 | 0 | | 3588233 | 130481 | None | Item 8.51 | FF:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.( Including lift charges-1% ) | Sqm | 119.18 | 119.18 | 311.0 | False | None | None | False | None | False | 37064.98 | 0 | | 3588234 | 130481 | None | Item 8.8 | FF:Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( Including lift charges-1% ) | Sqm | 442.15 | 442.15 | 247.5 | False | None | None | False | None | False | 109432.125 | 0 | | 3588235 | 130481 | None | Item 8.2.1 | FF:Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( Including lift charges-1% ) | Sqm | 351.58 | 351.58 | 25.704 | False | None | None | False | None | False | 9037.01232 | 0 | | 3588236 | 130481 | None | Item 8.16.2 | FF:Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 150mm wide( Including lift charges-1% ) | Rmtr | 45.28 | 45.28 | 120.59 | False | None | None | False | None | False | 5460.3152 | 0 | | 3588237 | 130481 | None | Item 7.18 | FF:Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.( Including lift charges-1% ) | Cum | 2403.86 | 2403.86 | 1.518 | False | None | None | False | None | False | 3649.05948 | 0 | | 3588238 | 130481 | None | Item 15.7 | FF:Integral Crystalline Water Proofing Admixture Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetrationagainst control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel reinforcement against corrosion mixed @ 1% by weight of cementitiouscontent in concrete. ie., integral crystaline waterproofing admix @ 0.5kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)( Including lift charges-1% ) | Sqm | 732.95 | 732.95 | 11.16 | False | None | None | False | None | False | 8179.722 | 0 | | 3588239 | 130481 | None | Item 9.21.2 | FF:Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm( Including lift charges-1% ) | Sqm | 1475.44 | 1475.44 | 57.0 | False | None | None | False | None | False | 84100.08 | 0 | | 3588240 | 130481 | None | Item 9.11 | FF:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.( Including lift charges-1% ) | Sqm | 1059.51 | 1059.51 | 6.2 | False | None | None | False | None | False | 6568.962 | 0 | | 3588241 | 130481 | None | Item 9.38 | FF:Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.( Including lift charges-1% ) | Sqm | 1658.98 | 1658.98 | 25.704 | False | None | None | False | None | False | 42642.42192 | 0 | | 3588242 | 130481 | None | Item 9.36 | FF:Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications.( Including lift charges-1% ) | Sqm | 1966.47 | 1966.47 | 2.7 | False | None | None | False | None | False | 5309.469 | 0 | | 3588243 | 130481 | None | Item 9.23 | FF:Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.( Including lift charges-1% ) | Sqm | 2938.97 | 2938.97 | 3.25 | False | None | None | False | None | False | 9551.6525 | 0 | | 3588244 | 130481 | None | Item 8.39 | FF:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Including lift charges-1% ) | Sqm | 151.35 | 151.35 | 234.0 | False | None | None | False | None | False | 35415.9 | 0 | | 3588245 | 130481 | None | Item 8.30 | FF:Finishing walls with Acrylic Smooth exterior paint of required shade :Newwork (Two coat applied @ 1.67L/10 m² over and including priming coat ofexterior primer applied @ 2.20 kg/10 m²) with paint of approved qualityto give an even shade, after thoroughly brooming the surface to remove alldirt, dust, mortar drops and foreign matter including preparing the surfaceeven and sand paper smooth, cost of materials, labour complete as perspecifications and as per directions of Engineer-in-charge( Including lift charges-1% ) | Sqm | 207.37 | 207.37 | 247.5 | False | None | None | False | None | False | 51324.075 | 0 | | 3588246 | 130481 | None | Item 8.40 | FF:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Including lift charges-1% ) | Sqm | 137.05 | 137.05 | 12.05 | False | None | None | False | None | False | 1651.4525 | 0 | | 3588247 | 130481 | None | Item 8.38 | FF:Painting with oil type wood preservative of approved brand and anufacture :New work (two coats) to give an even shade including preparingthe surface after thorougly cleaning oil, grease, dirt and foreign matter,sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Including lift charges-1% ) | Sqm | 47.67 | 47.67 | 19.2 | False | None | None | False | None | False | 915.264 | 0 | | 3588248 | 130481 | None | Item 12.62 | FF:Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete( Including lift charges-1% ) | Nos | 282.45 | 282.45 | 12.0 | False | None | None | False | None | False | 3389.4 | 0 | | 3588249 | 130481 | None | Item 12.58 | FF:Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete( Including lift charges-1% ) | Nos | 143.01 | 143.01 | 6.0 | False | None | None | False | None | False | 858.06 | 0 | | 3588250 | 130481 | None | Item 12.8 | FF:Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch.( Including lift charges-1% ) | Nos | 339.66 | 339.66 | 12.0 | False | None | None | False | None | False | 4075.92 | 0 | | 3588251 | 130481 | None | Item 12.63 | FF:Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete( Including lift charges-1% ) | Nos | 154.93 | 154.93 | 12.0 | False | None | None | False | None | False | 1859.16 | 0 | | 3588252 | 130481 | None | Item Least quotation rate | FF:Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges).( Including lift charges-1% ) | Sqm | 511.28 | 511.28 | 14.25 | False | None | None | False | None | False | 7285.74 | 0 | | 3588253 | 130481 | None | Item 15.1 | FF:Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification.( Including lift charges-1% ) | Sqm | 973.7 | 973.7 | 132.0 | False | None | None | False | None | False | 128528.4 | 0 | | 3588254 | 130481 | None | Item 1.15.2 | Sump Tank &SEPTIC tank:Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the Depth exceeding 1.5 m, but not exceeding 3 m | Cum | 501.5 | 501.5 | 24.762 | False | None | None | False | None | False | 12418.143 | 0 | | 3588255 | 130481 | None | Item 2.5.1 | Sump Tank&Septic Tank :Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9388.08 | 9388.08 | 12.375 | False | None | None | False | None | False | 116177.49 | 0 | | 3588256 | 130481 | None | Item 8.1.2 | Sump Tank&Septic Tank:Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of materials,
labour, curing complete as per specifications and as per directions of
Engineer-in-charge | Sqm | 284.38 | 284.38 | 35.0 | False | None | None | False | None | False | 9953.3 | 0 | | 3588257 | 130481 | None | Item 8.1.1 | Septic Tank:Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:
4 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of materials,
labour, curing complete as per specifications and as per directions of
Engineer-in-charge | Sqm | 300.9 | 300.9 | 30.0 | False | None | None | False | None | False | 9027.0 | 0 | | 3588258 | 130481 | None | Item 15.6 | Sump Tank &SEPTIC Tank:Providing and laying water proofing treatment to the Water tanks & Liq uid Retaining structures with two component acrylic polymer modified
cementitious waterproofing membrane with minimum elongation of 50%
applied @ 1.5 kg/m2 for internal side waterproofing in two layers with
waiting period of 4-6 hrs per layer and food grade epoxy coating in two
coats certified by CFTRI Mysuru, including surface preparation completely
as per specification | Sqm | 598.26 | 598.26 | 59.0 | False | None | None | False | None | False | 35297.34 | 0 | | 3588259 | 130481 | None | Item 18.3 | Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. | Nos | 2315.16 | 2315.16 | 3.0 | False | None | None | False | None | False | 6945.48 | 0 |
| | 1721714040000 | 0 | None | None | Buildings | WATER SUPPLY AND DRAINAGE WORKS | 265216.8 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3588260 | 130482 | None | Item 14.2.1 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | Each | 5708.84 | 5708.84 | 1.0 | False | None | None | False | None | False | 5708.84 | 0 | | 3588261 | 130482 | None | Item 14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 5763.12 | 5763.12 | 2.0 | False | None | None | False | None | False | 11526.24 | 0 | | 3588262 | 130482 | None | Item 14.7.3 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mmC.P. brass pillar taps | Each | 3381.88 | 3381.88 | 2.0 | False | None | None | False | None | False | 6763.76 | 0 | | 3588263 | 130482 | None | Item 14.22A | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer in-charge. | Each | 955.8 | 955.8 | 5.0 | False | None | None | False | None | False | 4779.0 | 0 | | 3588264 | 130482 | None | Item 14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. | Each | 6563.16 | 6563.16 | 1.0 | False | None | None | False | None | False | 6563.16 | 0 | | 3588265 | 130482 | None | Item 14.10.1.2 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 225 mm | Each | 6363.74 | 6363.74 | 1.0 | False | None | None | False | None | False | 6363.74 | 0 | | 3588266 | 130482 | None | Item 14.11.2 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P.brass trap with necessary C.P. brass unions complete, including painting of
fittings and brackets, cutting and making good the wall wherever required : Size600x450x200 mm | Each | 5996.76 | 5996.76 | 1.0 | False | None | None | False | None | False | 5996.76 | 0 | | 3588267 | 130482 | None | Item 14.29 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 55.46 | 55.46 | 5.0 | False | None | None | False | None | False | 277.3 | 0 | | 3588268 | 130482 | None | Item 13.23.5 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 g | No | 1585.92 | 1585.92 | 1.0 | False | None | None | False | None | False | 1585.92 | 0 | | 3588269 | 130482 | None | Item 13.59 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete | Each | 259.6 | 259.6 | 5.0 | False | None | None | False | None | False | 1298.0 | 0 | | 3588270 | 130482 | None | Item 14.36.2 | Providing and fixing PTMT Waste Coupling for wash basin and sink,of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms | Each | 109.74 | 109.74 | 5.0 | False | None | None | False | None | False | 548.7 | 0 | | 3588271 | 130482 | None | 1Item 4.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe-40 mm dia | Each | 108.56 | 108.56 | 15.0 | False | None | None | False | None | False | 1628.4 | 0 | | 3588272 | 130482 | None | Item 14.40.1 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. | Each | 564.04 | 564.04 | 2.0 | False | None | None | False | None | False | 1128.08 | 0 | | 3588273 | 130482 | None | Item 13.25 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore,weighing not less than 40 gms | Nos | 172.28 | 172.28 | 2.0 | False | None | None | False | None | False | 344.56 | 0 | | 3588274 | 130482 | None | Item T090 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make includingtrench excavation and refilling etc. for EXTERNAL WORKS with: 50mm nominal bore pipes | Rmtr | 164.02 | 164.02 | 15.0 | False | None | None | False | None | False | 2460.3 | 0 | | 3588275 | 130482 | None | Item 166 | C.P. Brass stop cock (concealed) 15 mm | Nos | 619.5 | 619.5 | 4.0 | False | None | None | False | None | False | 2478.0 | 0 | | 3588276 | 130482 | None | Item 163 | Brass bib-cock 15 mm dia | Nos | 531.0 | 531.0 | 1.0 | False | None | None | False | None | False | 531.0 | 0 | | 3588277 | 130482 | None | Item MR | Air Vent Cowel 110mm | Nos | 118.0 | 118.0 | 2.0 | False | None | None | False | None | False | 236.0 | 0 | | 3588278 | 130482 | None | Item MR | Supplying, installing, testing and commissioning approved make Submersible Pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller with cabling between hePumps, control panel, UGR & OHT etc.,. complete.approx. Length of cable = 80. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter,.(3 no. working and 1no. Standby ) Sump To OHT (DOMESTIC): 2HP @ 35m head (SUMP TO OHT-DOMESTIC WATER PUMPS) For water sump | Each | 17700.0 | 17700.0 | 1.0 | False | None | None | False | None | False | 17700.0 | 0 | | 3588279 | 130482 | None | Item 10.1.5 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc 75 mm dia, 6 kg/sqcm & class 3 | Rmtr | 259.6 | 259.6 | 25.0 | False | None | None | False | None | False | 6490.0 | 0 | | 3588280 | 130482 | None | Item 10.1.6 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc 90 mm dia,6 kg/sqcm & class 3 | Rmtr | 346.92 | 346.92 | 50.0 | False | None | None | False | None | False | 17346.0 | 0 | | 3588281 | 130482 | None | Item 10.1.7 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc 110mm dia,6 kg/sqcm & class 3 | Rmtr | 484.98 | 484.98 | 60.0 | False | None | None | False | None | False | 29098.8 | 0 | | 3588282 | 130482 | None | Item 10.1.8 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc 140mm dia,6 kg/sqcm & class 3 | Rmtr | 689.12 | 689.12 | 18.0 | False | None | None | False | None | False | 12404.16 | 0 | | 3588283 | 130482 | None | Item 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 15 mm dia | Rmtr | 364.62 | 364.62 | 18.0 | False | None | None | False | None | False | 6563.16 | 0 | | 3588284 | 130482 | None | Item 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 20mm dia | Rmtr | 447.22 | 447.22 | 32.0 | False | None | None | False | None | False | 14311.04 | 0 | | 3588285 | 130482 | None | Item 13.33.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 15 mm dia | Rmtr | 195.88 | 195.88 | 30.0 | False | None | None | False | None | False | 5876.4 | 0 | | 3588286 | 130482 | None | Item 13.33.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm dia | Rmtr | 256.06 | 256.06 | 45.0 | False | None | None | False | None | False | 11522.7 | 0 | | 3588287 | 130482 | None | Item 13.33.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm dia | Rmtr | 562.86 | 562.86 | 15.0 | False | None | None | False | None | False | 8442.9 | 0 | | 3588288 | 130482 | None | Item 13.48 | Providing and fixing on wallafce unplasticised rigid PVC rain water pipes confirming to IS :13592 Type A, Including jointing with seal ring confirming to IS : 5382 Leaving 10mm gap thermal expansion, (i) Single socketed pipes - 100 mm dia | Rmtr | 343.38 | 343.38 | 45.0 | False | None | None | False | None | False | 15452.1 | 0 | | 3588289 | 130482 | None | Item Approved rate | Drilling holes of 2.50 cms dia (roof/chajja/stone). - in slabs upto 10 cms thick | Nos | 185.26 | 185.26 | 25.0 | False | None | None | False | None | False | 4631.5 | 0 | | 3588290 | 130482 | None | Item 13.34 | Providing and placing on terrace, (at all floor levels) polythylene water storage tanks as per IS 12701 marked, with cover and suitable locking arrangements, making necessary holes for inlet,outlet and over flow pipes, but without fitting and basesupport fot tank | l | 10.62 | 10.62 | 2000.0 | False | None | None | False | None | False | 21240.0 | 0 | | 3588291 | 130482 | None | Item 16.8 | Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering
12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover | Each | 5653.38 | 5653.38 | 6.0 | False | None | None | False | None | False | 33920.28 | 0 |
| | 1721714040000 | 0 | None | None | Buildings | Internal and External Electrification woks | 396434.72 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3588292 | 130483 | None | Item 2.2.1 | Supplying Point wiring using Copper wire without switch. and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch | Point | 317.42 | 317.42 | 18.0 | False | None | None | False | None | False | 5713.56 | 0 | | 3588293 | 130483 | None | Item 2.2.2 | Supplying Point wiring using Copper wire without switch. and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch | Point | 447.22 | 447.22 | 30.0 | False | None | None | False | None | False | 13416.6 | 0 | | 3588294 | 130483 | None | Item 2.2.3 | Supplying Point wiring using Copper wire without switch. and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch | Point | 654.9 | 654.9 | 18.0 | False | None | None | False | None | False | 11788.2 | 0 | | 3588295 | 130483 | None | Item 3.4.1 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way | Each | 162.84 | 162.84 | 8.0 | False | None | None | False | None | False | 1302.72 | 0 | | 3588296 | 130483 | None | Item 3.4.2 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3 way | Each | 187.62 | 187.62 | 2.0 | False | None | None | False | None | False | 375.24 | 0 | | 3588297 | 130483 | None | Item 3.4.3 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way | Each | 208.86 | 208.86 | 2.0 | False | None | None | False | None | False | 417.72 | 0 | | 3588298 | 130483 | None | Item 3.4.4 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way | Each | 259.6 | 259.6 | 12.0 | False | None | None | False | None | False | 3115.2 | 0 | | 3588299 | 130483 | None | Item 3.4.5 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way | Each | 307.98 | 307.98 | 8.0 | False | None | None | False | None | False | 2463.84 | 0 | | 3588300 | 130483 | None | Item 3.4.6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way | Each | 376.42 | 376.42 | 2.0 | False | None | None | False | None | False | 752.84 | 0 | | 3588301 | 130483 | None | Item 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1-2 Module | Each | 161.66 | 161.66 | 8.0 | False | None | None | False | None | False | 1293.28 | 0 | | 3588302 | 130483 | None | Item 3.5.2 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module | Each | 189.98 | 189.98 | 2.0 | False | None | None | False | None | False | 379.96 | 0 | | 3588303 | 130483 | None | Item 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4Module | Each | 206.5 | 206.5 | 2.0 | False | None | None | False | None | False | 413.0 | 0 | | 3588304 | 130483 | None | Item 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6Module | Each | 276.12 | 276.12 | 12.0 | False | None | None | False | None | False | 3313.44 | 0 | | 3588305 | 130483 | None | Item 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module | Each | 335.12 | 335.12 | 8.0 | False | None | None | False | None | False | 2680.96 | 0 | | 3588306 | 130483 | None | Item 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12Module | Each | 405.92 | 405.92 | 2.0 | False | None | None | False | None | False | 811.84 | 0 | | 3588307 | 130483 | None | Item 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch | Each | 120.36 | 120.36 | 60.0 | False | None | None | False | None | False | 7221.6 | 0 | | 3588308 | 130483 | None | Item 3.6.2 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch | Each | 195.88 | 195.88 | 7.0 | False | None | None | False | None | False | 1371.16 | 0 | | 3588309 | 130483 | None | Item 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket | Each | 201.78 | 201.78 | 12.0 | False | None | None | False | None | False | 2421.36 | 0 | | 3588310 | 130483 | None | Item 3.6.8 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push | Each | 208.86 | 208.86 | 2.0 | False | None | None | False | None | False | 417.72 | 0 | | 3588311 | 130483 | None | Item 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. | Each | 421.26 | 421.26 | 10.0 | False | None | None | False | None | False | 4212.6 | 0 | | 3588312 | 130483 | None | Item 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch | Each | 384.68 | 384.68 | 8.0 | False | None | None | False | None | False | 3077.44 | 0 | | 3588313 | 130483 | None | Item 3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket | Each | 278.48 | 278.48 | 8.0 | False | None | None | False | None | False | 2227.84 | 0 | | 3588314 | 130483 | None | Item 3.6.11 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket | Each | 184.08 | 184.08 | 2.0 | False | None | None | False | None | False | 368.16 | 0 | | 3588315 | 130483 | None | Item 12.2.1 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell | Each | 290.28 | 290.28 | 2.0 | False | None | None | False | None | False | 580.56 | 0 | | 3588316 | 130483 | None | Item 1.13 | Supplying and Fixing Metal Fan Box with Round Hook. | Each | 138.06 | 138.06 | 12.0 | False | None | None | False | None | False | 1656.72 | 0 | | 3588317 | 130483 | None | Item 1.2.1 | Supplying heavy gauge PVC Concealed Conduit System pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) | Rmtr | 77.88 | 77.88 | 175.0 | False | None | None | False | None | False | 13629.0 | 0 | | 3588318 | 130483 | None | Item 1.2.2 | Supplying heavy gauge PVC Concealed Conduit System pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) | Rmtr | 92.04 | 92.04 | 125.0 | False | None | None | False | None | False | 11505.0 | 0 | | 3588319 | 130483 | None | Item 1.3.1 | Supplying heavy gauge PVC Groove Cutting in Wall pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. | Rmtr | 80.24 | 80.24 | 170.0 | False | None | None | False | None | False | 13640.8 | 0 | | 3588320 | 130483 | None | Item 1.3.2 | Supplying heavy gauge PVCGroove Cutting in Wall pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) | Rmtr | 93.22 | 93.22 | 75.0 | False | None | None | False | None | False | 6991.5 | 0 | | 3588321 | 130483 | None | Item 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latestamendments. 1.5 sqmm | Rmtr | 30.68 | 30.68 | 400.0 | False | None | None | False | None | False | 12272.0 | 0 | | 3588322 | 130483 | None | Item 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latestamendments. 2.5 sqmm | Rmtr | 49.56 | 49.56 | 350.0 | False | None | None | False | None | False | 17346.0 | 0 | | 3588323 | 130483 | None | Item 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latestamendments. 4 sqmm | Rmtr | 74.34 | 74.34 | 250.0 | False | None | None | False | None | False | 18585.0 | 0 | | 3588324 | 130483 | None | Item 5.19.9 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure 12 Way SP & N | Each | 2748.22 | 2748.22 | 2.0 | False | None | None | False | None | False | 5496.44 | 0 | | 3588325 | 130483 | None | Item 5.18.1 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP | Each | 489.7 | 489.7 | 18.0 | False | None | None | False | None | False | 8814.6 | 0 | | 3588326 | 130483 | None | Item 5.20.1 | Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board. Board 16-25 Amps 2 pole | Each | 5046.86 | 5046.86 | 2.0 | False | None | None | False | None | False | 10093.72 | 0 | | 3588327 | 130483 | None | Item 11.3.2 | Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w | Each | 814.2 | 814.2 | 21.0 | False | None | None | False | None | False | 17098.2 | 0 | | 3588328 | 130483 | None | Item 11.11.3 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K | Each | 175.82 | 175.82 | 5.0 | False | None | None | False | None | False | 879.1 | 0 | | 3588329 | 130483 | None | Item 11.11.7 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K | Each | 502.68 | 502.68 | 10.0 | False | None | None | False | None | False | 5026.8 | 0 | | 3588330 | 130483 | None | Item 12.27 | Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply | No | 61.36 | 61.36 | 2.0 | False | None | None | False | None | False | 122.72 | 0 | | 3588331 | 130483 | None | Item 6.1 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. | Each | 1760.56 | 1760.56 | 5.0 | False | None | None | False | None | False | 8802.8 | 0 | | 3588332 | 130483 | None | Item 6.3.1 | Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model | Each | 3521.12 | 3521.12 | 10.0 | False | None | None | False | None | False | 35211.2 | 0 | | 3588333 | 130483 | None | Item 12.46 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin | Each | 74.34 | 74.34 | 22.0 | False | None | None | False | None | False | 1635.48 | 0 | | 3588334 | 130483 | None | Item 13.7.1 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders | Each | 143.96 | 143.96 | 21.0 | False | None | None | False | None | False | 3023.16 | 0 | | 3588335 | 130483 | None | Item 13.11 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. | Each | 371.7 | 371.7 | 12.0 | False | None | None | False | None | False | 4460.4 | 0 | | 3588336 | 130483 | None | Item 13.13 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. | Each | 834.26 | 834.26 | 5.0 | False | None | None | False | None | False | 4171.3 | 0 | | 3588337 | 130483 | None | Item 13.4.1 | Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length | Each | 1723.98 | 1723.98 | 2.0 | False | None | None | False | None | False | 3447.96 | 0 | | 3588338 | 130483 | None | Item HESCOM 32.07 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 25 sqmm | Km | 164667.82 | 164667.82 | 0.075 | False | None | None | False | None | False | 12350.0865 | 0 | | 3588339 | 130483 | None | Item 21.05 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm | Km | 24645.48 | 24645.48 | 0.075 | False | None | None | False | None | False | 1848.411 | 0 | | 3588340 | 130483 | None | Item 6.11.3 | Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 19-20 SR 32mm dia | Each | 143.96 | 143.96 | 10.0 | False | None | None | False | None | False | 1439.6 | 0 | | 3588341 | 130483 | None | Item 6.17.5 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes 19-20 SR 10 sqmm | Each | 9.44 | 9.44 | 10.0 | False | None | None | False | None | False | 94.4 | 0 | | 3588342 | 130483 | None | Item BSR 29.03 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 Mtr wherever necessary as directed-In ordinary soil | Cum | 306.8 | 306.8 | 35.0 | False | None | None | False | None | False | 10738.0 | 0 | | 3588343 | 130483 | None | Item 5.42.1 | Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 14SWG | Sq CM | 0.59 | 0.59 | 55000.0 | False | None | None | False | None | False | 32450.0 | 0 | | 3588344 | 130483 | None | Item 5.40.3 | Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolici FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 400 A 4 x 50 x 10 mm Aluminium Strips | Rmtr | 5245.1 | 5245.1 | 2.0 | False | None | None | False | None | False | 10490.2 | 0 | | 3588345 | 130483 | None | Item 5.41.3 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x75x6mm | Rmtr | 654.9 | 654.9 | 9.0 | False | None | None | False | None | False | 5894.1 | 0 | | 3588346 | 130483 | None | Item 13.5 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. | Each | 191.16 | 191.16 | 2.0 | False | None | None | False | None | False | 382.32 | 0 | | 3588347 | 130483 | None | Item 7.1.2 | Supplying .15 litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. | Each | 10342.7 | 10342.7 | 1.0 | False | None | None | False | None | False | 10342.7 | 0 | | 3588348 | 130483 | None | Item 5.40.1 | Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips | Rmtr | 2908.7 | 2908.7 | 3.0 | False | None | None | False | None | False | 8726.1 | 0 | | 3588349 | 130483 | None | Item 5.41.4 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel | Rmtr | 892.08 | 892.08 | 2.0 | False | None | None | False | None | False | 1784.16 | 0 | | 3588350 | 130483 | None | Item 5.18.4 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP | Each | 872.02 | 872.02 | 3.0 | False | None | None | False | None | False | 2616.06 | 0 | | 3588351 | 130483 | None | Item 5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN | Each | 1300.36 | 1300.36 | 1.0 | False | None | None | False | None | False | 1300.36 | 0 | | 3588352 | 130483 | None | Item 5.7.2 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32Amps | Each | 284.38 | 284.38 | 3.0 | False | None | None | False | None | False | 853.14 | 0 | | 3588353 | 130483 | None | Item 5.7.3 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 63Amps | Each | 473.18 | 473.18 | 1.0 | False | None | None | False | None | False | 473.18 | 0 | | 3588354 | 130483 | None | Item 5.12.1 | Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 63Amps | Each | 8119.58 | 8119.58 | 1.0 | False | None | None | False | None | False | 8119.58 | 0 | | 3588355 | 130483 | None | Item 5.27 | Supplying, fixing and wiring rotary selector switch suitable for Ammeter | Each | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 | | 3588356 | 130483 | None | Item 5.28 | Supplying, fixing and wiring rotary selector switch suitable for Voltmeter | Each | 188.8 | 188.8 | 1.0 | False | None | None | False | None | False | 188.8 | 0 | | 3588357 | 130483 | None | Item 5.29 | Supplying, fixing and wiring 3 Phase Digital Ammeter | Each | 1681.5 | 1681.5 | 2.0 | False | None | None | False | None | False | 3363.0 | 0 | | 3588358 | 130483 | None | Item 5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C (48/6.36) | Each | 607.7 | 607.7 | 3.0 | False | None | None | False | None | False | 1823.1 | 0 | | 3588359 | 130483 | None | Item 5.34 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound (48/6.32) | Each | 663.16 | 663.16 | 3.0 | False | None | None | False | None | False | 1989.48 | 0 | | 3588360 | 130483 | None | Item 5.3 | Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter | Each | 1628.4 | 1628.4 | 3.0 | False | None | None | False | None | False | 4885.2 | 0 |
|
|
|---|