| 3521021 | 126452 | None | CODE01 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m | Cum | 208.95 | 208.95 | 35.85 | False | None | None | False | None | False | 7490.8575 | 0 |
| 3521022 | 126452 | None | CODE02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5831.7 | 5831.7 | 9.87 | False | None | None | False | None | False | 57558.879 | 0 |
| 3521023 | 126452 | None | CODE03 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6739.36 | 6739.36 | 4.32 | False | None | None | False | None | False | 29114.0352 | 0 |
| 3521024 | 126452 | None | CODE04 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10652.88 | 10652.88 | 0.66 | False | None | None | False | None | False | 7030.9008 | 0 |
| 3521025 | 126452 | None | CODE05 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 214.2 | 214.2 | 13.49 | False | None | None | False | None | False | 2889.558 | 0 |
| 3521026 | 126452 | None | CODE06 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 4987.5 | 4987.5 | 14.38 | False | None | None | False | None | False | 71720.25 | 0 |
| 3521027 | 126452 | None | CODE07 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5619.6 | 5619.6 | 11.02 | False | None | None | False | None | False | 61927.992 | 0 |
| 3521028 | 126452 | None | CODE08 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. | Sqm | 208.95 | 208.95 | 14.63 | False | None | None | False | None | False | 3056.9385 | 0 |
| 3521029 | 126452 | None | CODE09 | Plinth Beam: Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9736.65 | 9736.65 | 2.73 | False | None | None | False | None | False | 26581.0545 | 0 |
| 3521030 | 126452 | None | CODE10 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. | Cum | 422.1 | 422.1 | 44.19 | False | None | None | False | None | False | 18652.599 | 0 |
| 3521031 | 126452 | None | CODE11 | Columns above Plinth: Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11034.87 | 11034.87 | 1.59 | False | None | None | False | None | False | 17545.4433 | 0 |
| 3521032 | 126452 | None | CODE12 | Beam, Lintel and Roof: Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10385.76 | 10385.76 | 1.23 | False | None | None | False | None | False | 12774.4848 | 0 |
| 3521033 | 126452 | None | CODE13 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Kgs | 96.6 | 96.6 | 1034.46 | False | None | None | False | None | False | 99928.836 | 0 |
| 3521034 | 126452 | None | CODE14 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1255.8 | 1255.8 | 99.09 | False | None | None | False | None | False | 124437.222 | 0 |
| 3521035 | 126452 | None | CODE15 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Kgs | 152.25 | 152.25 | 909.93 | False | None | None | False | None | False | 138536.8425 | 0 |
| 3521036 | 126452 | None | CODE16 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 3843.0 | 3843.0 | 1.89 | False | None | None | False | None | False | 7263.27 | 0 |
| 3521037 | 126452 | None | CODE17 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 313.95 | 313.95 | 195.32 | False | None | None | False | None | False | 61320.714 | 0 |
| 3521038 | 126452 | None | CODE18 | Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide ( mix of same proportion ) , including cost of materials, labour, curing, complete as per specifications. | Sqm | 664.65 | 664.65 | 55.65 | False | None | None | False | None | False | 36987.7725 | 0 |
| 3521039 | 126452 | None | CODE19 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 99.75 | 99.75 | 66.75 | False | None | None | False | None | False | 6658.3125 | 0 |
| 3521040 | 126452 | None | CODE20 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 117.6 | 117.6 | 118.58 | False | None | None | False | None | False | 13945.008 | 0 |
| 3521041 | 126452 | None | CODE21 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kgs | 142.8 | 142.8 | 424.59 | False | None | None | False | None | False | 60631.452 | 0 |
| 3521042 | 126452 | None | CODE22 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 583.8 | 583.8 | 65.7 | False | None | None | False | None | False | 38355.66 | 0 |
| 3521043 | 126452 | None | CODE23 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) | Sqm | 897.75 | 897.75 | 28.72 | False | None | None | False | None | False | 25783.38 | 0 |
| 3521044 | 126452 | None | CODE24 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 6891.15 | 6891.15 | 6.3 | False | None | None | False | None | False | 43414.245 | 0 |
| 3521045 | 126452 | None | CODE25 | ELETRICAL: Supplying heavy gauge PVC conduit pipe mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thick | Mtr | 61.0 | 61.0 | 30.0 | False | None | None | False | None | False | 1830.0 | 0 |
| 3521046 | 126452 | None | CODE26 | ELETRICAL: Supplying heavy gauge PVC conduit pipe mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick | Mtr | 70.0 | 70.0 | 20.0 | False | None | None | False | None | False | 1400.0 | 0 |
| 3521047 | 126452 | None | CODE27 | Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 200 x 65 mm | Each | 145.0 | 145.0 | 2.0 | False | None | None | False | None | False | 290.0 | 0 |
| 3521048 | 126452 | None | CODE28 | Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box | Each | 49.0 | 49.0 | 4.0 | False | None | None | False | None | False | 196.0 | 0 |
| 3521049 | 126452 | None | CODE29 | Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box | Each | 51.0 | 51.0 | 4.0 | False | None | None | False | None | False | 204.0 | 0 |
| 3521050 | 126452 | None | CODE30 | Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering,
finishing upto wall surface complete. | Mtr | 26.0 | 26.0 | 12.0 | False | None | None | False | None | False | 312.0 | 0 |
| 3521051 | 126452 | None | CODE31 | Supplying And Fixing Metal Fan Box with Round Hook. | Nos | 163.0 | 163.0 | 1.0 | False | None | None | False | None | False | 163.0 | 0 |
| 3521052 | 126452 | None | CODE32 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3m from tapping point to out let via switch | Point | 276.0 | 276.0 | 6.0 | False | None | None | False | None | False | 1656.0 | 0 |
| 3521053 | 126452 | None | CODE33 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch | Point | 386.0 | 386.0 | 3.0 | False | None | None | False | None | False | 1158.0 | 0 |
| 3521054 | 126452 | None | CODE34 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via
switch | Point | 567.0 | 567.0 | 1.0 | False | None | None | False | None | False | 567.0 | 0 |
| 3521055 | 126452 | None | CODE35 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm | Mtr | 26.0 | 26.0 | 55.0 | False | None | None | False | None | False | 1430.0 | 0 |
| 3521056 | 126452 | None | CODE36 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5sqmm | Mtr | 40.0 | 40.0 | 36.0 | False | None | None | False | None | False | 1440.0 | 0 |
| 3521057 | 126452 | None | CODE37 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on
the existing metal/PVC box. 16-18 Module | Each | 270.0 | 270.0 | 2.0 | False | None | None | False | None | False | 540.0 | 0 |
| 3521058 | 126452 | None | CODE38 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch | Each | 88.0 | 88.0 | 12.0 | False | None | None | False | None | False | 1056.0 | 0 |
| 3521059 | 126452 | None | CODE39 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module | Each | 313.0 | 313.0 | 1.0 | False | None | None | False | None | False | 313.0 | 0 |
| 3521060 | 126452 | None | CODE40 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch | Each | 182.0 | 182.0 | 2.0 | False | None | None | False | None | False | 364.0 | 0 |
| 3521061 | 126452 | None | CODE41 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket | Each | 79.0 | 79.0 | 1.0 | False | None | None | False | None | False | 79.0 | 0 |
| 3521062 | 126452 | None | CODE42 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP | Each | 1103.0 | 1103.0 | 2.0 | False | None | None | False | None | False | 2206.0 | 0 |
| 3521063 | 126452 | None | CODE43 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II - Double Door 12 Way SP & N | Each | 2067.0 | 2067.0 | 1.0 | False | None | None | False | None | False | 2067.0 | 0 |
| 3521064 | 126452 | None | CODE44 | Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. | Each | 3942.0 | 3942.0 | 1.0 | False | None | None | False | None | False | 3942.0 | 0 |
| 3521065 | 126452 | None | CODE45 | Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete double door 12way SP & N | Mtr | 3078.0 | 3078.0 | 0.5 | False | None | None | False | None | False | 1539.0 | 0 |
| 3521066 | 126452 | None | CODE46 | Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. | Job | 5325.0 | 5325.0 | 1.0 | False | None | None | False | None | False | 5325.0 | 0 |
| 3521067 | 126452 | None | CODE47 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with
double ball bearing system. 48" Sweep (1200 mm) Regular model | Each | 2085.0 | 2085.0 | 1.0 | False | None | None | False | None | False | 2085.0 | 0 |
| 3521068 | 126452 | None | CODE48 | Extra length of GI pipe of class B 19mm dia for down rod. | Mtr | 173.0 | 173.0 | 1.0 | False | None | None | False | None | False | 173.0 | 0 |
| 3521069 | 126452 | None | CODE49 | Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI less than 80. Power Input: 220-240V@ 50/60Hz & Power factor less than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W | Each | 740.0 | 740.0 | 6.0 | False | None | None | False | None | False | 4440.0 | 0 |
| 3521070 | 126452 | None | CODE50 | Supplying & Fixing of 70-150 W lamp holder 2 Pin | Nos | 118.0 | 118.0 | 6.0 | False | None | None | False | None | False | 708.0 | 0 |
| 3521071 | 126452 | None | CODE51 | Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. | Each | 281.0 | 281.0 | 1.0 | False | None | None | False | None | False | 281.0 | 0 |
| 3521072 | 126452 | None | CODE52 | Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. | Each | 486.0 | 486.0 | 6.0 | False | None | None | False | None | False | 2916.0 | 0 |