3624931 | 131731 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work n all kinds of soils Depth upto 3 m | Cum | 249.26 | 249.26 | 12.94 | False | None | None | False | None | False | 3225.4244 | 0 |
3624932 | 131731 | None | code02 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m | Cum | 273.98 | 273.98 | 6.47 | False | None | None | False | None | False | 1772.6506 | 0 |
3624933 | 131731 | None | code03 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6168.67 | 6168.67 | 1.55 | False | None | None | False | None | False | 9561.4385 | 0 |
3624934 | 131731 | None | code04 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6580.67 | 6580.67 | 6.49 | False | None | None | False | None | False | 42708.5483 | 0 |
3624935 | 131731 | None | code05 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications | Sqm | 1349.3 | 1349.3 | 47.13 | False | None | None | False | None | False | 63592.509 | 0 |
3624936 | 131731 | None | code06 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10194.53 | 10194.53 | 0.98 | False | None | None | False | None | False | 9990.6394 | 0 |
3624937 | 131731 | None | code06.01 | Roof Beam | Cum | 9557.37 | 9557.37 | 3.0 | False | None | None | False | None | False | 28672.11 | 0 |
3624938 | 131731 | None | code06.02 | For Chejja | Cum | 9238.79 | 9238.79 | 0.08 | False | None | None | False | None | False | 739.1032 | 0 |
3624939 | 131731 | None | code07 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.) | Tonne | 92140.71 | 92140.71 | 0.39 | False | None | None | False | None | False | 35934.8769 | 0 |
3624940 | 131731 | None | code08 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 262.65 | 262.65 | 55.68 | False | None | None | False | None | False | 14624.352 | 0 |
3624941 | 131731 | None | code09 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 255.44 | 255.44 | 52.74 | False | None | None | False | None | False | 13471.9056 | 0 |
3624942 | 131731 | None | code10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. | Sqm | 103.0 | 103.0 | 55.68 | False | None | None | False | None | False | 5735.04 | 0 |
3624943 | 131731 | None | code11 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 130.81 | 130.81 | 55.68 | False | None | None | False | None | False | 7283.5008 | 0 |
3624944 | 131731 | None | code12 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 291.49 | 291.49 | 52.74 | False | None | None | False | None | False | 15373.1826 | 0 |
3624945 | 131731 | None | code13 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm. Maximum possible size1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T and P s shall not be made) | Sqm | 5551.7 | 5551.7 | 0.81 | False | None | None | False | None | False | 4496.877 | 0 |
3624946 | 131731 | None | code14 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. | Sqm | 489.25 | 489.25 | 9.45 | False | None | None | False | None | False | 4623.4125 | 0 |
3624947 | 131731 | None | code15 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. | Sqm | 2436.98 | 2436.98 | 9.45 | False | None | None | False | None | False | 23029.461 | 0 |
3624948 | 131731 | None | code16 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete | Sqm | 915.67 | 915.67 | 14.4 | False | None | None | False | None | False | 13185.648 | 0 |
3624949 | 131731 | None | code17 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications | Sqm | 1492.47 | 1492.47 | 36.3 | False | None | None | False | None | False | 54176.661 | 0 |
3624950 | 131731 | None | code18 | White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap | Each | 2637.83 | 2637.83 | 2.0 | False | None | None | False | None | False | 5275.66 | 0 |
3624951 | 131731 | None | code19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 15mm nominal dia pipes. | Mtr | 318.27 | 318.27 | 20.0 | False | None | None | False | None | False | 6365.4 | 0 |
3624952 | 131731 | None | code20 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc HDPE Grade PE100-PN6.0,200mm dia. | Mtr | 885.8 | 885.8 | 12.0 | False | None | None | False | None | False | 10629.6 | 0 |
3624953 | 131731 | None | code21 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore | Each | 314.15 | 314.15 | 6.0 | False | None | None | False | None | False | 1884.9 | 0 |
3624954 | 131731 | None | code22 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore | Each | 314.15 | 314.15 | 4.0 | False | None | None | False | None | False | 1256.6 | 0 |
3624955 | 131731 | None | code23 | providing and fixing square-mouth S. W. gully trap class SP-1 complete with C.1. grating brick masonry chamber 150 x100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover t5 be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: | Each | 2658.43 | 2658.43 | 2.0 | False | None | None | False | None | False | 5316.86 | 0 |
3624956 | 131731 | None | code24 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia | No | 45.32 | 45.32 | 8.0 | False | None | None | False | None | False | 362.56 | 0 |
3624957 | 131731 | None | code25 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete | Each | 1256.6 | 1256.6 | 2.0 | False | None | None | False | None | False | 2513.2 | 0 |
3624958 | 131731 | None | code26 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever
required | Each | 4983.14 | 4983.14 | 4.0 | False | None | None | False | None | False | 19932.56 | 0 |
3624959 | 131731 | None | code27 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : | Each | 4587.62 | 4587.62 | 2.0 | False | None | None | False | None | False | 9175.24 | 0 |
3624960 | 131731 | None | code28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | Ltr | 9.27 | 9.27 | 500.0 | False | None | None | False | None | False | 4635.0 | 0 |