| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1721883341000 | 0 | None | None | Buildings | Construction of 5 Rooms Building Rooms | 9917513.92 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3612158 | 131286 | None | 1.4.2 | Earth work excavation by manual means for drains, canals, waste weir, draft,
approach channels, key trenches, foundation of Buildings & bridges and such
simillar works in all kinds of soils, as per drawing and technical specifications,
including setting out, shoring, strutting, barricading, caution lights, removal
of stumps and other deleterious matter, excavated surface leveled and sides
neatly dressed disposing off the excavated stuff or sorting & stacking the
selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of
labour, tools & other appurtenaces required to complete the work | Cum | 271.95 | 271.95 | 354.46 | False | None | None | False | None | False | 96395.397 | 0 | | 3612159 | 131286 | None | 2.1.2 | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in
layers not exceeding 150 mm thickness, well compacted using plate vibrators,
including all lead & lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5947.2 | 5947.2 | 102.48 | False | None | None | False | None | False | 609469.056 | 0 | | 3612160 | 131286 | None | 2.2.1 | Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes,labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7129.46 | 7129.46 | 45.45 | False | None | None | False | None | False | 324033.957 | 0 | | 3612161 | 131286 | None | 2.2.1 | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11222.3 | 11222.3 | 38.71 | False | None | None | False | None | False | 434415.233 | 0 | | 3612162 | 131286 | None | 2.2.1 | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications.
M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10562.16 | 10562.16 | 16.53 | False | None | None | False | None | False | 174592.5048 | 0 | | 3612163 | 131286 | None | 2.5.1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11138.4 | 11138.4 | 39.49 | False | None | None | False | None | False | 439855.416 | 0 | | 3612164 | 131286 | None | 2.5.1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10442.25 | 10442.25 | 79.73 | False | None | None | False | None | False | 832560.5925 | 0 | | 3612165 | 131286 | None | 2.11.a | Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and
technical specification.Buildings | Tonne | 93929.85 | 93929.85 | 19.0 | False | None | None | False | None | False | 1784667.15 | 0 | | 3612166 | 131286 | None | 5.4 | Providing Size Stone masonry with hard stone in foundation & plinth
with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6708.45 | 6708.45 | 105.99 | False | None | None | False | None | False | 711028.6155 | 0 | | 3612167 | 131286 | None | 5.4 | Providing Size Stone masonry with hard stone in foundation & plinth
with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6708.45 | 6708.45 | 127.16 | False | None | None | False | None | False | 853046.502 | 0 | | 3612168 | 131286 | None | 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations and other similar works etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up to 50 m
and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 852.2 | False | None | None | False | None | False | 238019.46 | 0 | | 3612169 | 131286 | None | 2.2.1 | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6601.35 | 6601.35 | 1.68 | False | None | None | False | None | False | 11090.268 | 0 | | 3612170 | 131286 | None | 6.8 | Providing Brick work with common burnt clay Non Modular bricks
of class designation 3.5 in superstructure above plinth level in all
shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)
including cost of all materials, labour, scaffolding and usage charges of
machinery & other incidental charges complete as per the direction of
engineer incharge of work. | Cum | 8367.45 | 8367.45 | 107.64 | False | None | None | False | None | False | 900672.318 | 0 | | 3612171 | 131286 | None | 2.2.1 | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Sqm | 9571.96 | 9571.96 | 1.01 | False | None | None | False | None | False | 9667.6796 | 0 | | 3612172 | 131286 | None | 8.7 | Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3
coarse sand) finished with a floating coat of neat cement on the rough
side of single or half brick wall including rounding off corners wherever
required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge. | Sqm | 384.3 | 384.3 | 782.98 | False | None | None | False | None | False | 300899.214 | 0 | | 3612173 | 131286 | None | 8.6.1 | Providing 12 mm cement plaster with Cement mortar 1:3 (1
cement: 3 coarse sand) finished with a floating coat of neat cement
to brick masonry including rounding off corners wherever required
smooth rendering, providing and removing scaffolding, including cost
of materials, labour, curing complete as per specifications and as per
directions of Engineer-in-charge | Sqm | 339.15 | 339.15 | 525.97 | False | None | None | False | None | False | 178382.7255 | 0 | | 3612174 | 131286 | None | 9.22.2 | Providing and laying Polished Glazed Vitrified tiles in floor with different
sizes (thickness to be specified by the manufacturer), with water
absorption less than 0.08% and conforming to IS:15622, of approved
brand & manufacturer, in all colours and shade, laid with cement based
high polymer modified quick set tile adhesive (water based) conforming
to IS : 15477, in average 6 mm thickness, including grouting of joints
(Payment for grouting of joints to be made separately).Size of Tile 600x600 mm | Sqm | 1392.3 | 1392.3 | 530.47 | False | None | None | False | None | False | 738573.381 | 0 | | 3612175 | 131286 | None | 12.12 | Providing Mathi/Nandi wood frames of doors, windows, clerestory
windows, ventilators and other frames, wrought, framed or assembled
including making plaster groves (excluding cost of cement concrete and
side clamps ), but including cost of materials, labour, usage charges
complete as per specifications. | Cum | 130412.1 | 130412.1 | 2.51 | False | None | None | False | None | False | 327334.371 | 0 | | 3612176 | 131286 | None | 12.15 | Providing and fixing in position fully panelled Honne wood shutters for
doors with stiles and rails of 40mm. thick with bottom and lock rails
180mm wide top rail and stiles 100mm wide as per drawing and panels
of 25mm thick including cost of materials, labour, usage charges
complete as per specifications. ( excluding cost of fixtures ) | Sqm | 7812.0 | 7812.0 | 61.2 | False | None | None | False | None | False | 478094.4 | 0 | | 3612177 | 131286 | None | 8.28 | Finishing walls with water proofing cement paint of required shade :New
work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
and foreign matter including preparing the surface even and sand paper
smooth, cost of materials, labour comp | Sqm | 93.45 | 93.45 | 782.98 | False | None | None | False | None | False | 73169.481 | 0 | | 3612178 | 131286 | None | 8.25 | Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade :New work (two coats) over
and including water thinnable priming coat with cement primer after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
and foreign matter including preparing the surface even and sand paper
smooth, cost of materials, labour complete as per specifications and as
per directions of Engineer-in-charge | Sqm | 143.85 | 143.85 | 782.98 | False | None | None | False | None | False | 112631.673 | 0 | | 3612179 | 131286 | None | 8.25 | Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade :New work (two coats) over
and including water thinnable priming coat with cement primer after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
and foreign matter including preparing the surface even and sand paper
smooth, cost of materials, labour complete as per specifications and as
per directions of Engineer-in-charge | Sqm | 143.85 | 143.85 | 525.97 | False | None | None | False | None | False | 75660.7845 | 0 | | 3612180 | 131286 | None | 8.41 | Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :Two coats on
new work over an under coat of suitable shade with ordinary paint
of approved brand and manufacture after thoroughly brooming the
surface to remove all dirt, dust, mortar drops and foreign matter
including preparing the surface even and sand paper smooth, cost of
materials, labour complete as per specifications and as per directions
of Engineer-in-charge. | Sqm | 175.35 | 175.35 | 122.4 | False | None | None | False | None | False | 21462.84 | 0 | | 3612181 | 131286 | None | 22.15.9 | Providing and Fixing Stainless Steel Fixtures Conforming to 304 Graded Steel as per direction of engineer in charge SS Hinges 100 mm | No | 73.5 | 73.5 | 120.0 | False | None | None | False | None | False | 8820.0 | 0 | | 3612182 | 131286 | None | 22.15.5 | Providing and Fixing Stainless Steel Fixtures Conforming to 304 Graded Steel as per direction of engineer in charge SS Tower Bolts 150x10 mm | Nos | 126.0 | 126.0 | 120.0 | False | None | None | False | None | False | 15120.0 | 0 | | 3612183 | 131286 | None | 22.15.4 | Providing and Fixing Stainless Steel Fixtures Conforming to 304 Graded Steel as per direction of engineer in charge SS Aldrop 16 mm dia 300 mm | Nos | 393.75 | 393.75 | 40.0 | False | None | None | False | None | False | 15750.0 | 0 | | 3612184 | 131286 | None | 11.34 B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming
coat with approved steel primer all complete. Fixed to openings /
wooden frames with rawl plugs screws etc.l | Kgs | 144.9 | 144.9 | 247.5 | False | None | None | False | None | False | 35862.75 | 0 | | 3612185 | 131286 | None | 11.3 | Providing and fixing in position collapsible steel shutters with
vertical channels 20x10x2 mm and braced with flat iron diagonals
20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm,
with 40 mm dia steel pulleys, complete with bolts, nuts, locking
arrangement, stoppers, handles, including applying a priming coat of
approved steel primer including cost of materials ,labour, usage charges
of machinery complete as per specifications and as per directions of
the Engineer-in-Charge | Sqm | 8689.8 | 8689.8 | 10.5 | False | None | None | False | None | False | 91242.9 | 0 | | 3612186 | 131286 | None | 7.33.1 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing
up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts
& nuts 8mm dia. G.I plain/bitumen washers complete but excluding the
cost of purlins, rafters, trusses etc. The sheets shall be manufactured
out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet
stabiliser in resin system under approximately 2400 psi and hot cured.
They shall be of uniform pigmentation and thickness without air pockets
and shall conform to IS 10192 and IS 12866.The sheets shall be opaque
or translucent, clear or pigmented, textured or smooth as specified.2 mm thick corrugated (2.5"" or 4.2"" or 6"") or step-down (2"" or 3"" or
6"" ) as specified | Sqm | 1110.9 | 1110.9 | 22.5 | False | None | None | False | None | False | 24995.25 | 0 |
| | 1721883341000 | 0 | None | None | Buildings | ELECTRIFICATION | 242018.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3612187 | 131287 | None | 1.2.1 | Supplying heavy gauge PVC conduit pipe . mm dia.mm thick
confirming to IS 2509 with suitable size bends, metal/PVC Junction
boxes, adhesive paste etc., and running before concreting the slab. The
conduit should be tied to the reinforcement rods by using binding
wires and unused ways of junction boxes and pipe ends should be
covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary | Rmtr | 66.0 | 66.0 | 150.0 | False | None | None | False | None | False | 9900.0 | 0 | | 3612188 | 131287 | None | 1.4.4 | Supplying and fixing sheet Metal box made out of 18 SWG sheet
metal with necessary holes for cable/conduit entry as required with one
coat of primer of approved make etc.180 x 90 x 65 mm | Rmtr | 161.0 | 161.0 | 5.0 | False | None | None | False | None | False | 805.0 | 0 | | 3612189 | 131287 | None | 2.5.4 | Supplying and drawing Flexible Multicore Cable manufactured with
electrolytic grade flexible copper with low conductor confirming to
IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for
working voltage upto 1100 Volts as per IS-694:1990 6C x 1.5 mm2 | Rmtr | 121.0 | 121.0 | 450.0 | False | None | None | False | None | False | 54450.0 | 0 | | 3612190 | 131287 | None | 2.1.2 | Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &
1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated
copper wire (confirming to IS-694: and latest amendments) with
a 6Amps flush type SP control switch shall be fixed on the existing
plastic sheet/ gang box, the other end of the wires shall be terminated
with sufficient loose length in a wood/PVC round block. complete for
each outlet Medium point above 3Mtr upto 6Mtr from tapping point to out let via
switch | No | 394.0 | 394.0 | 5.0 | False | None | None | False | None | False | 1970.0 | 0 | | 3612191 | 131287 | None | 3.2 | 6A 3/5 Way Each 147.00
3.2 Supplying and mounting 2 Nos. of 2Way 6 A flush type switches
either surface/flush mounted on existing gang box or in 4mm thick
plastic sheet and mounted on a flush mounted wooden box and wiring
as per IS 3854 | No | 170.0 | 170.0 | 50.0 | False | None | None | False | None | False | 8500.0 | 0 | | 3612192 | 131287 | None | 3.14.16 | Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board Electronic stepped regulator. | No | 281.0 | 281.0 | 1.0 | False | None | None | False | None | False | 281.0 | 0 | | 3612193 | 131287 | None | 3.5.8 | Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box.18 Module | No | 457.0 | 457.0 | 5.0 | False | None | None | False | None | False | 2285.0 | 0 | | 3612194 | 131287 | None | 11.2.2 | Supplying & fixing retrofit type-PL- LED Lamp W LED
linear source with CCT 6500 degree K, CRI 70 efficacy 80
lumen per W, life25000 burning hours and Compliance to IS
10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF
electronic driver integrated in the system, with PF 0.95, power loss
should 5% of lamp Wage., short circuit & open circuit protection to
be integrated in the circuit, THD less than 20%, Life as per LM 79.
The operating input voltage should be between 130 to275 V. Tested
by NABL/CPRI accredited laboratory with 2 years Warranty against
any manufacturing defect working under standard electrical condition 18-20 W | No | 702.0 | 702.0 | 60.0 | False | None | None | False | None | False | 42120.0 | 0 | | 3612195 | 131287 | None | 5.17.8 | Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit breaking
capacity of 10K and complete wiring as required confirming to IEC
60898 40-63 Amps | Nos | 2393.0 | 2393.0 | 1.0 | False | None | None | False | None | False | 2393.0 | 0 | | 3612196 | 131287 | None | 1.5.1 | Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box | No | 49.0 | 49.0 | 60.0 | False | None | None | False | None | False | 2940.0 | 0 | | 3612197 | 131287 | None | 6.4.2 | Supplying of Ceiling Fan with Capacitor rating As per guideline of
BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984
with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto
35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor
0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery
210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM /
W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet,
Class B motor insulation, Bearing Two ball bearings, Top 6202,
Bottom 6201, as per IS specification, Motor winding. Temp rise Shall
not exceed 75 deg C over and ambient of 40 0C by resistance method
at 245 V, Insulation resistance Shall not be less than Two Mega Ohms
(2M Ohms), Leakage current Should not exceed 210 Micro Amp,
Power input, W& current, Air Delivery & Fan Speed as per
IS:374/2019 with latest amendment, 2year manufacturer Warranty.
(BLDC fans)56" Sweep 5 Star (1400 mm) | No | 3754.0 | 3754.0 | 31.0 | False | None | None | False | None | False | 116374.0 | 0 |
|
|
|---|
| generalCriterionList | | createdTs | version | createdDate | modifiedDate | criterionType | description | tenderEligibilityCriterionDocumentList |
|---|
| 1721883342000 | 0 | None | None | ELIGIBILITY | Tenders from Joint ventures are not acceptable. | None | | 1721883342000 | 0 | None | None | ELIGIBILITY | Bidders shall not be under a declaration of ineligibility for
corrupt and fraudulent practices issued by Government of Karnataka
| None | | 1721883342000 | 0 | None | None | ELIGIBILITY | Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. | None | | 1721883342000 | 0 | None | None | ELIGIBILITY | It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. | None | | 1721883342000 | 0 | None | None | ELIGIBILITY | EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. | None | | 1721883419000 | 0 | None | None | ELIGIBILITY | The agency shall furnish affidavit stating that existing commitments furnished by him are true. If found falls action shall be taken as per rules. | None | | 1721883425000 | 0 | None | None | ELIGIBILITY | The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing KPP portal | None | | 1721883430000 | 0 | None | None | ELIGIBILITY | As per Karnataka State Government order No. L D/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007a sum amounting to 1% of the bill amount will be deducted towards Construction Labor Welfare fund | None | | 1721883435000 | 0 | None | None | ELIGIBILITY | The Employer reserves the right to reject any or all Tenders without assigning any reason. | None | | 1721883440000 | 0 | None | None | ELIGIBILITY | Conditional tenders will not be accepted. | None | | 1721883445000 | 0 | None | None | ELIGIBILITY | Financial Year will be reckoned as the period between first day of April andThirty first day of March of succeeding year. (both days inclusive) | None | | 1721883450000 | 0 | None | None | ELIGIBILITY | The Item Rates quoted shall include cost of Royalty charges on constructive materials & other taxes as per the prevailing Government Orders at the time of execution and including cost and conveyance of all materials, curing, loading and unloading, with all leads & lifts, labour, hire charges of all machineries & equipments and all incidental charges etc.complete necessary for completion of work. All the Items shall be executed as directed by the Engineer-in-charge of the work | None | | 1721883465000 | 0 | None | None | ELIGIBILITY | Tenderer shall note that the Tenders of those found Eligible as mentionedin Clause 3 -Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation | None | | 1721883471000 | 0 | None | None | ELIGIBILITY | The bidder is required to ensure browser compatibility of the computerwell in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end. | None | | 1721883475000 | 0 | None | None | ELIGIBILITY | The tenderer shall furnish required information in all prescribed formats.Scan & upload all the original documents/Formats required for this bid to2 of 17 the KPPP portal. The Original documents/ Formats shall be produced atthe time of opening of technical bid for physical verification | None | | 1721883481000 | 0 | None | None | ELIGIBILITY | The tenderer shall note that the scanned Documents shall also be uploaded in the tasks created under Document/ Evidence required from the bidder | None | | 1721883485000 | 0 | None | None | ELIGIBILITY | All materials required for this work shall be procured by the bidder him self and should got tested by the quality control authorities at his own cost before use on the work. | None | | 1721883490000 | 0 | None | None | ELIGIBILITY | The intending contractors are requested to note that they should abide bythe detailed instructions and conditions contained in the standard bid document KW4 KPWD and further orders theron | None | | 1721883496000 | 0 | None | None | ELIGIBILITY | The KPWD Code, KTTP Act/ Rules, Delegation of powers and other Government orders issued by Government from time to time will apply. | None | | 1721883500000 | 0 | None | None | ELIGIBILITY | If the office happens to be closed on the dates notified, next working day will holds good | None | | 1721883505000 | 0 | None | None | ELIGIBILITY | The field laboratory shall preferably locate, adjacent to the site with therequired amenity as per the clause. Failing which 1% of the amount of work done will be penalized | None | | 1721883509000 | 0 | None | None | ELIGIBILITY | If undue delay caused by the contractor, the progressive damages caused to road will be assessed and make good at the cost and risk of the contractor. In addition, suitable action will be initiated against the contractor for the damage occurred during the undue delay period in accordance with the Karnataka Highway act 1964. | None | | 1721883520000 | 0 | None | None | ELIGIBILITY | All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity till completion. Contractor should indemnify the client to that extent | None | | 1721883604000 | 0 | None | None | ELIGIBILITY | Contractor should follow strictly the prevailing rules of labour act and applicable any law as concerned. | None | | 1721883609000 | 0 | None | None | ELIGIBILITY | 18%GST shall be paid to the tendered amount separately. | None | | 1721883614000 | 0 | None | None | ELIGIBILITY | The increase in GST shall not be paid in the extended period of Contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. | None | | 1721883620000 | 0 | None | None | ELIGIBILITY | Any dispute or difference or claim arising out of, or in connection with, or relating to the present contract or the breach, termination or invalidity thereof shall be referred and settled under the Arbitration Centre -Karnataka (Domestic & International) Rules 2012, by one or more arbitrators appointed in accordance with its rules | None | | 1721883626000 | 0 | None | None | ELIGIBILITY | The tenderers shall note that as per the Government Order No.FD/850/EXP-12/15 dated 29-12-2015 and GO No.FD/130/EXP-12/15 dated 8-9-2015 & GO no 850-12/15 Dated 15-12-2016 the exemption from payment of EMD for Micro and small enterprises registered with NSIC under single point vendor registration scheme is applicable only for purchases, but not for works | None | | 1721883630000 | 0 | None | None | ELIGIBILITY | Contractor should follow strictly the prevailing rules of labour act and applicable any other law as concerned to work. In case of any mishap, accidents are cause of death it is the duty of the contractor to settle the 3 of 17 dispute at is own cost. In no way department is held responsible | None | | 1721883635000 | 0 | None | None | ELIGIBILITY | construction materials (Minerals Metal, Sand and Murum, etc.,) shall be bought from the authorized quarries along with the mineral dispatch permit or else 5 times the royalty will be deducted as penalty as per the Directions on the Director, Mines and Geology Department Bangalore Proceedings Dated 25-03-2013 | None | | 1721883640000 | 0 | None | None | ELIGIBILITY | The defect liability period is one (1) years from the date of actual completion of work | None | | 1721883646000 | 0 | None | None | ELIGIBILITY | Financial turn over and Financial commitments of previous years shall be given weight age of 10% per year to bring them to the price level of 2024-25 in the technical qualification criteria | None | | 1721883652000 | 0 | None | None | ELIGIBILITY | As per Govt circular no GO-FD/AE 263/EXP12-2022 dt-11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the required machineries for various activities involved in construction as per MORTH specification | None | | 1721883657000 | 0 | None | None | ELIGIBILITY | The tender period for completion of work is Nine (09) Calendar months.(Including monsoon period) | None | | 1721883662000 | 0 | None | None | ELIGIBILITY | The tenderer has to quote the rates are exclusive of GST and As per Government CIRCULAR NO:FD/447/EXPENDITURE | None | | 1721883667000 | 0 | None | None | ELIGIBILITY | Estimate rates are excluding GST and the prevailing GST 18 percent ofAPT is added in the form of Lumpsum in santioned estimate as per the guidelines in common SR 2021-22 GO PWD51 RDF 2019 Bengaluru dt 18-03-2022. Therefore, APT or ECV is excluding GST. In kppp portal there is no option to add GST separately over and above APT during DTSprocess. Hence even through the tender has been invited by opting for the INCLUSIVE option, the item wise rates do not include GST. Hence GST will be paid separately for the quoted amount as per the Govt. circular no FD/447/expenditur /12/2022/dt -30-07-2022. Therefore GST declaration certificate must be uploaded mandatorily by the prospective bidders. | None | | 1721883672000 | 0 | None | None | ELIGIBILITY | All necessary arrangements shall be made and precaution taken to prevent completely or partially, damage to the structure or labours / employees during construction period. (As per recent Labour Act) Contractor shall be fully responsible for any damage to the structure during the construction and maintainance period.Any damage caused due to any reasons shall be rectified / replaced at his own cost as per the direction of Engineer in charge. Nothing shall be payable by the Department on account of inclusive of all such arrangements/ precautions work needed. | None | | 1721883712000 | 0 | None | None | ELIGIBILITY | The Earnest Money Deposit Rs:1,53,000.00 through KPPP portal OR it shallbe in two parts. Part (1) Rs. 1,00,000.00 through KPPP portal under anyone of the option(CC/DD/NEFT/OTC) and Part (2) Balance EMD of Rs.53,000.00 shall be in favour of the Executive Engineer, PWD Division Koppal, in the form of Bank Guarantee in the prescribed format obtained from any Nationalized/Scheduled Bank. The scanned copy of the original Part(2) EMD should be uploaded along with the Technical bid. The part (2)of the EMD shall be delivered to the Executive Engineer before the prescribed Date and time of opening of the Technical Bids | None | | 1721883720000 | 0 | None | None | ELIGIBILITY | The contractor shall bound to comply the prevailing rules and regulations with regard to the EPF rules | None | | 1721883726000 | 0 | None | None | ELIGIBILITY | Above Tender amount will not be given | None | | 1721883731000 | 0 | None | None | ELIGIBILITY | Star rate applicable as per Go No PWD 159 CRM 2009 Dated 30-09-2010 | None |
|
|---|