| 3631229 | 132049 | None | I No 1.4.2 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 1.4.2 Depth exceeding 1.5m, but not exceeding 3 m | Cum | 271.95 | 271.95 | 70.18 | False | None | None | False | None | False | 19085.451 | 0 |
| 3631230 | 132049 | None | I No 2.1.3 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. 2.1.3 Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 3.91 | False | None | None | False | None | False | 24587.8395 | 0 |
| 3631231 | 132049 | None | I No 2.4.2 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications 2.4.2 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6652.8 | 6652.8 | 1.45 | False | None | None | False | None | False | 9646.56 | 0 |
| 3631232 | 132049 | None | A 7 | As per recommendations of Technical working group, rates for formwork shall be addedon percentage basis to the finished concrete item rate as per table below | Cum | 6652.8 | 6652.8 | 0.41 | False | None | None | False | None | False | 2727.648 | 0 |
| 3631233 | 132049 | None | I No 2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and
technical specification. a. Buildings | t | 93929.85 | 93929.85 | 0.1 | False | None | None | False | None | False | 9392.985 | 0 |
| 3631234 | 132049 | None | I No 2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7185.15 | 7185.15 | 15.47 | False | None | None | False | None | False | 111154.2705 | 0 |
| 3631235 | 132049 | None | A 7 | As per recommendations of Technical working group, rates for formwork shall be addedon percentage basis to the finished concrete item rate as per table below | Cum | 7185.15 | 7185.15 | 7.93 | False | None | None | False | None | False | 56978.2395 | 0 |
| 3631236 | 132049 | None | I No 2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings | t | 93929.85 | 93929.85 | 1.45 | False | None | None | False | None | False | 136198.2825 | 0 |
| 3631237 | 132049 | None | I No 5.11 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :5.1.1 Cement mortar | Cum | 5891.55 | 5891.55 | 2.4 | False | None | None | False | None | False | 14139.72 | 0 |
| 3631238 | 132049 | None | I No 6.33 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per | Sqm | 1292.55 | 1292.55 | 36.14 | False | None | None | False | None | False | 46712.757 | 0 |
| 3631239 | 132049 | None | I No 6.8 | Providing Brick work with common burnt clay Non Modular bricks of classdesignation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials,labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 8367.45 | 8367.45 | 13.44 | False | None | None | False | None | False | 112458.528 | 0 |
| 3631240 | 132049 | None | I No 8.1.2 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 253.05 | 253.05 | 156.38 | False | None | None | False | None | False | 39571.959 | 0 |
| 3631241 | 132049 | None | I No 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 143.85 | 143.85 | 92.09 | False | None | None | False | None | False | 13247.1465 | 0 |
| 3631242 | 132049 | None | I No 9.19 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.9.12.1 Size of Tile 500x500 mm | Sqm | 1231.65 | 1231.65 | 21.38 | False | None | None | False | None | False | 26332.677 | 0 |
| 3631243 | 132049 | None | I No 9.38 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications | Sqm | 1461.6 | 1461.6 | 27.83 | False | None | None | False | None | False | 40676.328 | 0 |
| 3631244 | 132049 | None | I No 11.34A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | Kg | 176.4 | 176.4 | 400.0 | False | None | None | False | None | False | 70560.0 | 0 |
| 3631245 | 132049 | None | I No 12.83.2 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm ( 0.1 mm) wall thickness and 3 nos.
stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section | m | 333.9 | 333.9 | 36.0 | False | None | None | False | None | False | 12020.4 | 0 |
| 3631246 | 132049 | None | I No 12.55.1 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.12.55.1 -do- with both side prelam | Sqm | 2484.3 | 2484.3 | 11.34 | False | None | None | False | None | False | 28171.962 | 0 |
| 3631247 | 132049 | None | I No 14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 14.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | No | 5128.2 | 5128.2 | 2.0 | False | None | None | False | None | False | 10256.4 | 0 |
| 3631248 | 132049 | None | I No 14.5 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | No | 9074.1 | 9074.1 | 2.0 | False | None | None | False | None | False | 18148.2 | 0 |
| 3631249 | 132049 | None | I No 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:14.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | No | 4327.05 | 4327.05 | 2.0 | False | None | None | False | None | False | 8654.1 | 0 |
| 3631250 | 132049 | None | I No 13.51 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay (non modular) bricks of class designation 3.5 | No | 1791.3 | 1791.3 | 2.0 | False | None | None | False | None | False | 3582.6 | 0 |
| 3631251 | 132049 | None | I No 13.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | l | 9.45 | 9.45 | 2000.0 | False | None | None | False | None | False | 18900.0 | 0 |
| 3631252 | 132049 | None | I No 13.32.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 13.32.3 25 mm nominal dia pipes | m | 500.85 | 500.85 | 30.0 | False | None | None | False | None | False | 15025.5 | 0 |
| 3631253 | 132049 | None | I No 13.8.2.2 | Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length, 20mm | No | 115.5 | 115.5 | 4.0 | False | None | None | False | None | False | 462.0 | 0 |
| 3631254 | 132049 | None | I No 13.9.1 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet - 100 mm diameter | No | 269.85 | 269.85 | 4.0 | False | None | None | False | None | False | 1079.4 | 0 |
| 3631255 | 132049 | None | I No 13.59 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete | No | 231.0 | 231.0 | 4.0 | False | None | None | False | None | False | 924.0 | 0 |
| 3631256 | 132049 | None | I No 13.62 | Providing and fixing PVC (S.W.R) S Trap 10cms x 10cms with all fitting
arrangements & all necessary accessories complete | No | 375.9 | 375.9 | 4.0 | False | None | None | False | None | False | 1503.6 | 0 |
| 3631257 | 132049 | None | I No 14.32.4 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm | No | 1812.3 | 1812.3 | 1.0 | False | None | None | False | None | False | 1812.3 | 0 |
| 3631258 | 132049 | None | I No 1.1.1 | Concealed PVC Conduit System Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2mm thick | m | 72.45 | 72.45 | 30.0 | False | None | None | False | None | False | 2173.5 | 0 |
| 3631259 | 132049 | None | I No 1.5 | PVC/metal conduit Deep Junction Box Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box | No | 51.45 | 51.45 | 2.0 | False | None | None | False | None | False | 102.9 | 0 |
| 3631260 | 132049 | None | I No 2.3.2 | Wiring for Lightings/Power Circuit Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 Sqmm ( | m | 27.3 | 27.3 | 30.0 | False | None | None | False | None | False | 819.0 | 0 |
| 3631261 | 132049 | None | I No 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 Sqmm | m | 44.1 | 44.1 | 30.0 | False | None | None | False | None | False | 1323.0 | 0 |
| 3631262 | 132049 | None | I No 3.6.1 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way | No | 107.1 | 107.1 | 6.0 | False | None | None | False | None | False | 642.6 | 0 |
| 3631263 | 132049 | None | I No 3.6.2 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps two way. | No | 174.3 | 174.3 | 5.0 | False | None | None | False | None | False | 871.5 | 0 |
| 3631264 | 132049 | None | I No 3.6.7 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch | No | 189.0 | 189.0 | 2.0 | False | None | None | False | None | False | 378.0 | 0 |
| 3631265 | 132049 | None | I No 3.6.9 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch. | No | 342.3 | 342.3 | 2.0 | False | None | None | False | None | False | 684.6 | 0 |
| 3631266 | 132049 | None | I No 3.8 | 4mm Thick Plastic Sheets Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. | cm | 0.43 | 0.43 | 2000.0 | False | None | None | False | None | False | 860.0 | 0 |
| 3631267 | 132049 | None | I No 5.7.2 | Porcelain Fuse Channel Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps | No | 253.05 | 253.05 | 1.0 | False | None | None | False | None | False | 253.05 | 0 |
| 3631268 | 132049 | None | I No 5.18 | Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps SP | No | 435.75 | 435.75 | 1.0 | False | None | None | False | None | False | 435.75 | 0 |
| 3631269 | 132049 | None | I No 5.19.3 | MCB Distribution Boards Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.I - Single Door 8 Way SP & N | No | 1566.6 | 1566.6 | 1.0 | False | None | None | False | None | False | 1566.6 | 0 |
| 3631270 | 132049 | None | I No 11.3.2 | PVC Batten with LED Tubes Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4'- 20/22 w | No | 724.5 | 724.5 | 2.0 | False | None | None | False | None | False | 1449.0 | 0 |
| 3631271 | 132049 | None | I NO 11.5.3 | LED Down Lights Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W | No | 1390.2 | 1390.2 | 2.0 | False | None | None | False | None | False | 2780.4 | 0 |
| 3631272 | 132049 | None | I No 12.46 | Lamp Holder Supplying & Fixing of 70-150 Watts lamp holder 2 Pin | No | 66.15 | 66.15 | 2.0 | False | None | None | False | None | False | 132.3 | 0 |
| 3631273 | 132049 | None | I No 13.7.1 | Fixing all type of Luminaries Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders | No | 128.1 | 128.1 | 2.0 | False | None | None | False | None | False | 256.2 | 0 |
| 3631274 | 132049 | None | I No 13.19 | Fixing of LED Lights Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. | No | 514.5 | 514.5 | 2.0 | False | None | None | False | None | False | 1029.0 | 0 |
| 3631275 | 132049 | None | I No 1.1 | Earth work in surface excavation for stripping, seating of bund, Road way, by
manual means for lowering & leveling the ground for all works other than
foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. | Cum | 95.55 | 95.55 | 78.0 | False | None | None | False | None | False | 7452.9 | 0 |
| 3631276 | 132049 | None | I No 6.8.1 | Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) | Sqm | 1121.4 | 1121.4 | 75.0 | False | None | None | False | None | False | 84105.0 | 0 |
| 3631277 | 132049 | None | I No 2.1.1 | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. 2.1.1 Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5604.9 | 5604.9 | 0.23 | False | None | None | False | None | False | 1289.127 | 0 |
| 3631278 | 132049 | None | I No 8.42.1 | Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. 8.42.1 300 x 250 x 100 mm size | m | 318.15 | 318.15 | 10.0 | False | None | None | False | None | False | 3181.5 | 0 |
| 3631279 | 132049 | None | M 1 | LED Luminary : Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. . Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .*30*W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned Supplying and Fixing 65 mm dia class A GI pipe bracket up to 1 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting And solar PV module mounting structure of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts ,nuts and wiring using suitable..Pole hight 5m above the ground,24 ah LiePo4 battery & 100 wp pv module.Along with simulation results using PV Syst or equivalent software, Including Installation , commissioning and maintenance Including Civil works ( Rate Approved as per SE Municipal City Corporation Ballary, Ref : DUDC Koppal) | No | 42500.0 | 42500.0 | 2.0 | False | None | None | False | None | False | 85000.0 | 0 |