| 3580846 | 130237 | None | EECM01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth 3 m to 6 m | Cum | 154.63 | 154.63 | 495.0 | False | None | None | False | None | False | 76541.85 | 0 |
| 3580847 | 130237 | None | EECM02 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m | Cum | 134.8 | 134.8 | 885.0 | False | None | None | False | None | False | 119298.0 | 0 |
| 3580848 | 130237 | None | EECM03 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.-In all kinds of soils upto 300 mm depth | Cum | 125.55 | 125.55 | 263.0 | False | None | None | False | None | False | 33019.65 | 0 |
| 3580849 | 130237 | None | EECM04 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.- In all kinds of soils Depth upto 1.5 m | Cum | 319.83 | 319.83 | 103.0 | False | None | None | False | None | False | 32942.49 | 0 |
| 3580850 | 130237 | None | EECM05 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications -Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. | Cum | 7915.06 | 7915.06 | 9.3 | False | None | None | False | None | False | 73610.058 | 0 |
| 3580851 | 130237 | None | EECM06 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. | Cum | 8607.17 | 8607.17 | 17.5 | False | None | None | False | None | False | 150625.475 | 0 |
| 3580852 | 130237 | None | EECM07 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately)including form work - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 13143.31 | 13143.31 | 3.9 | False | None | None | False | None | False | 51258.909 | 0 |
| 3580853 | 130237 | None | EECM08 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.- M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 8607.17 | 8607.17 | 5.4 | False | None | None | False | None | False | 46478.718 | 0 |
| 3580854 | 130237 | None | EECM09 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately)including form work - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 14895.75 | 14895.75 | 14.2 | False | None | None | False | None | False | 211519.65 | 0 |
| 3580855 | 130237 | None | EECM10 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately)including form work - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 14019.53 | 14019.53 | 13.9 | False | None | None | False | None | False | 194871.467 | 0 |
| 3580856 | 130237 | None | EECM11 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately)including form work - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 12705.2 | 12705.2 | 1.6 | False | None | None | False | None | False | 20328.32 | 0 |
| 3580857 | 130237 | None | EECM12 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately)including form work - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 13143.31 | 13143.31 | 37.0 | False | None | None | False | None | False | 486302.47 | 0 |
| 3580858 | 130237 | None | EECM13 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification-(a) Building | Tonne | 118226.37 | 118226.37 | 7.1 | False | None | None | False | None | False | 839407.227 | 0 |
| 3580859 | 130237 | None | EECM14 | Providing rubble and sand filling in layers of 250 to 300 mm including
cost of all materials,machinery, labour, watering, ramming and all other
ancillary operations complete., with all lead and all lifts. | Cum | 2775.36 | 2775.36 | 31.5 | False | None | None | False | None | False | 87423.84 | 0 |
| 3580860 | 130237 | None | EECM15 | Providing Coursed rubble masonry (first sort) with hard stone in
foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 8746.35 | 8746.35 | 28.9 | False | None | None | False | None | False | 252769.515 | 0 |
| 3580861 | 130237 | None | EECM16 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 8443.7 | 8443.7 | 22.3 | False | None | None | False | None | False | 188294.51 | 0 |
| 3580862 | 130237 | None | EECM17 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 10531.83 | 10531.83 | 59.7 | False | None | None | False | None | False | 628750.251 | 0 |
| 3580863 | 130237 | None | EECM18 | Providing and constructing laterite size stone masonry in CM 1:6 using available Laterite Stone including cost and conveyance of materials (except Laterite), curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Basement in CM 1:6. | Cum | 4793.44 | 4793.44 | 16.4 | False | None | None | False | None | False | 78612.416 | 0 |
| 3580864 | 130237 | None | EECM19 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 566.97 | 566.97 | 435.0 | False | None | None | False | None | False | 246631.95 | 0 |
| 3580865 | 130237 | None | EECM20 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer in- Charge. | Kg | 84.58 | 84.58 | 90.0 | False | None | None | False | None | False | 7612.2 | 0 |
| 3580866 | 130237 | None | EECM21 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerin- charge. | Sqm | 426.88 | 426.88 | 254.0 | False | None | None | False | None | False | 108427.52 | 0 |
| 3580867 | 130237 | None | EECM22 | Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 483.71 | 483.71 | 351.0 | False | None | None | False | None | False | 169782.21 | 0 |
| 3580868 | 130237 | None | EECM23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. | Sqm | 132.16 | 132.16 | 593.0 | False | None | None | False | None | False | 78370.88 | 0 |
| 3580869 | 130237 | None | EECM24 | Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide ( mix of same proportion ) , including cost of materials, labour, curing, complete as per specifications | Sqm | 1038.78 | 1038.78 | 249.5 | False | None | None | False | None | False | 259175.61 | 0 |
| 3580870 | 130237 | None | EECM25 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 164145.36 | 164145.36 | 0.34 | False | None | None | False | None | False | 55809.4224 | 0 |
| 3580871 | 130237 | None | EECM26 | Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 7588.63 | 7588.63 | 7.6 | False | None | None | False | None | False | 57673.588 | 0 |
| 3580872 | 130237 | None | EECM27 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | Nos | 1342.75 | 1342.75 | 4.0 | False | None | None | False | None | False | 5371.0 | 0 |
| 3580873 | 130237 | None | EECM28 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 70.04 | 70.04 | 18.5 | False | None | None | False | None | False | 1295.74 | 0 |
| 3580874 | 130237 | None | EECM29 | Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 52.86 | 52.86 | 18.5 | False | None | None | False | None | False | 977.91 | 0 |
| 3580875 | 130237 | None | EECM30 | Providing and fixing chromium plated brass butt hinges with
necessary chromium plated brass screws etc. complete.125x70x4 mm (ordinary type) | Nos | 224.67 | 224.67 | 24.0 | False | None | None | False | None | False | 5392.08 | 0 |
| 3580876 | 130237 | None | EECM31 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete | Nos | 171.81 | 171.81 | 8.0 | False | None | None | False | None | False | 1374.48 | 0 |
| 3580877 | 130237 | None | EECM32 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete | Nos | 313.22 | 313.22 | 8.0 | False | None | None | False | None | False | 2505.76 | 0 |
| 3580878 | 130237 | None | EECM33 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Nos | 1390.32 | 1390.32 | 4.0 | False | None | None | False | None | False | 5561.28 | 0 |
| 3580879 | 130237 | None | EECM34 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. | Nos | 1308.38 | 1308.38 | 4.0 | False | None | None | False | None | False | 5233.52 | 0 |
| 3580880 | 130237 | None | EECM35 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge-SS Aldrop 16mm dia, 300mm | Nos | 495.6 | 495.6 | 4.0 | False | None | None | False | None | False | 1982.4 | 0 |
| 3580881 | 130237 | None | EECM36 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. | Kg | 241.85 | 241.85 | 872.6 | False | None | None | False | None | False | 211038.31 | 0 |
| 3580882 | 130237 | None | EECM37 | Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RA9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P s shall not be made) | Sqm | 8899.65 | 8899.65 | 13.0 | False | None | None | False | None | False | 115695.45 | 0 |
| 3580883 | 130237 | None | EECM38 | Providing and fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)
| Sqm | 6638.4 | 6638.4 | 7.8 | False | None | None | False | None | False | 51779.52 | 0 |
| 3580884 | 130237 | None | EECM39 | Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thicknes Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) | Sqm | 7558.23 | 7558.23 | 8.4 | False | None | None | False | None | False | 63489.132 | 0 |
| 3580885 | 130237 | None | EECM40 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work -In all kinds of soils Depth upto 1.5 m | Cum | 319.83 | 319.83 | 9.2 | False | None | None | False | None | False | 2942.436 | 0 |
| 3580886 | 130237 | None | EECM41 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed gradedcoarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications includes formwork-Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - | Cum | 8545.04 | 8545.04 | 9.2 | False | None | None | False | None | False | 78614.368 | 0 |
| 3580887 | 130237 | None | EECM42 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 151.98 | 151.98 | 32.0 | False | None | None | False | None | False | 4863.36 | 0 |
| 3580888 | 130237 | None | EECM43 | Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. | Sqm | 5655.13 | 5655.13 | 14.8 | False | None | None | False | None | False | 83695.924 | 0 |
| 3580889 | 130237 | None | EECM44 | Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 m2 | Sqm | 5203.14 | 5203.14 | 8.6 | False | None | None | False | None | False | 44747.004 | 0 |
| 3580890 | 130237 | None | EECM45 | Extra for fixing granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. | m | 414.98 | 414.98 | 11.5 | False | None | None | False | None | False | 4772.27 | 0 |
| 3580891 | 130237 | None | EECM46 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. | Each | 781.07 | 781.07 | 1.0 | False | None | None | False | None | False | 781.07 | 0 |
| 3580892 | 130237 | None | EECM47 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 206.17 | 206.17 | 428.0 | False | None | None | False | None | False | 88240.76 | 0 |
| 3580893 | 130237 | None | EECM48 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 208.81 | 208.81 | 448.0 | False | None | None | False | None | False | 93546.88 | 0 |
| 3580894 | 130237 | None | EECM49 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 351.55 | 351.55 | 38.4 | False | None | None | False | None | False | 13499.52 | 0 |
| 3580895 | 130237 | None | EECM50 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter | m | 384.59 | 384.59 | 60.0 | False | None | None | False | None | False | 23075.4 | 0 |
| 3580896 | 130237 | None | EECM51 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. | Sqm | 337.01 | 337.01 | 34.0 | False | None | None | False | None | False | 11458.34 | 0 |
| 3580897 | 130237 | None | EECM52 | Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 572.25 | 572.25 | 143.0 | False | None | None | False | None | False | 81831.75 | 0 |
| 3580898 | 130237 | None | EECM53 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) of 20mm nominal dia pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solventcement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work | m | 227.32 | 227.32 | 24.0 | False | None | None | False | None | False | 5455.68 | 0 |
| 3580899 | 130237 | None | EECM54 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) of 25mm nominal dia pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solventcement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work | m | 296.04 | 296.04 | 24.0 | False | None | None | False | None | False | 7104.96 | 0 |
| 3580900 | 130237 | None | EECM55 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore | Nos | 725.56 | 725.56 | 1.0 | False | None | None | False | None | False | 725.56 | 0 |
| 3580901 | 130237 | None | EECM56 | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. | Each | 5598.3 | 5598.3 | 1.0 | False | None | None | False | None | False | 5598.3 | 0 |
| 3580902 | 130237 | None | EECM57 | Providing and fixing Sewer (SWR) 110 mm nominal dia pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge | m | 508.82 | 508.82 | 24.0 | False | None | None | False | None | False | 12211.68 | 0 |
| 3580903 | 130237 | None | EECM58 | Providing and fixing white vitreous china laboratory sink including making all connections including cost of fittings :Size 600x450x200 mm | Each | 4391.68 | 4391.68 | 1.0 | False | None | None | False | None | False | 4391.68 | 0 |
| 3580904 | 130237 | None | EECM59 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete | Each | 290.75 | 290.75 | 1.0 | False | None | None | False | None | False | 290.75 | 0 |
| 3580905 | 130237 | None | EECM60 | Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms | Each | 122.91 | 122.91 | 1.0 | False | None | None | False | None | False | 122.91 | 0 |
| 3580906 | 130237 | None | EECM61 | Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms | Nos | 414.98 | 414.98 | 1.0 | False | None | None | False | None | False | 414.98 | 0 |
| 3580907 | 130237 | None | EECM62 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 1612.35 | 1612.35 | 1.0 | False | None | None | False | None | False | 1612.35 | 0 |
| 3580908 | 130237 | None | EECM63 | Providing and fixing hand rail of approved size by welding etc.to steel ladder railing, balcony railing, staircase railing and similar works,including applying priming coat of approved steel primer. G.I. pipesincluding cost of materials, labour, usage charges of machinery completeas per specifications and as per directions of the Engineer-in-Charge. | Kg | 241.85 | 241.85 | 26.0 | False | None | None | False | None | False | 6288.1 | 0 |
| 3580909 | 130237 | None | EECM64 | Providing and fixing granite of size 1200mmx900mmx12mm thick, engraving with text of required size & logo in the granite in CM 1:4 with all lead and lifts, including cost of materials, labour, HOM complete as per specifications. | Job | 15704.0 | 15704.0 | 1.0 | False | None | None | False | None | False | 15704.0 | 0 |
| 3580910 | 130237 | None | EECM65 | Supplying and fixing heavy gauge PVC Conduit Pipe 25 mm Dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Make :FINOLEX /Astral/Supreme | Mtr | 92.04 | 92.04 | 530.0 | False | None | None | False | None | False | 48781.2 | 0 |
| 3580911 | 130237 | None | EECM66 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1 Way Havells/anchor/GM | Each | 162.84 | 162.84 | 4.0 | False | None | None | False | None | False | 651.36 | 0 |
| 3580912 | 130237 | None | EECM67 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4 Way )Make: Havells/anchor/GM | Each | 208.86 | 208.86 | 10.0 | False | None | None | False | None | False | 2088.6 | 0 |
| 3580913 | 130237 | None | EECM68 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way )Make: Havells/anchor/GM | Each | 307.98 | 307.98 | 1.0 | False | None | None | False | None | False | 307.98 | 0 |
| 3580914 | 130237 | None | EECM69 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 18 Way )make: Havells/anchor/GM | Each | 477.9 | 477.9 | 13.0 | False | None | None | False | None | False | 6212.7 | 0 |
| 3580915 | 130237 | None | EECM70 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 Way make: Havells/anchor/GM | Each | 161.66 | 161.66 | 4.0 | False | None | None | False | None | False | 646.64 | 0 |
| 3580916 | 130237 | None | EECM71 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.4 Way make: Havells/anchor/GM | Each | 206.5 | 206.5 | 10.0 | False | None | None | False | None | False | 2065.0 | 0 |
| 3580917 | 130237 | None | EECM72 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 Way make: Havells/anchor/GM | Each | 335.12 | 335.12 | 1.0 | False | None | None | False | None | False | 335.12 | 0 |
| 3580918 | 130237 | None | EECM73 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.18 Way make: Havells/anchor/GM | Each | 539.26 | 539.26 | 13.0 | False | None | None | False | None | False | 7010.38 | 0 |
| 3580919 | 130237 | None | EECM74 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model make: Havells/anchor/GM | Each | 3521.12 | 3521.12 | 12.0 | False | None | None | False | None | False | 42253.44 | 0 |
| 3580920 | 130237 | None | EECM75 | Fixing a ceiling fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring | Each | 201.78 | 201.78 | 12.0 | False | None | None | False | None | False | 2421.36 | 0 |
| 3580921 | 130237 | None | EECM76 | Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two Module Make:Bajaj/crompton/Havells | Each | 421.26 | 421.26 | 12.0 | False | None | None | False | None | False | 5055.12 | 0 |
| 3580922 | 130237 | None | EECM77 | Supplying exhaust fan of 1440 RPM of 300 mm (12") size with
bracket blades complete for light duty suitable to operate on 230V
50Hz, AC Supply Make:Bajaj/crompton/Havells | Each | 1760.56 | 1760.56 | 2.0 | False | None | None | False | None | False | 3521.12 | 0 |
| 3580923 | 130237 | None | EECM78 | Fixing one exhaust fan after making a suitable notch in the wall
and finishing with cement mortar and colouring to match the
existing wall or brackets, with bolts and nuts and a 5 A, ceiling
rose with sufficient length of 23 / 0.0076 inch PVC insulated twin
core wire of approved make with wire mesh and wooden frame | Each | 934.37 | 934.37 | 2.0 | False | None | None | False | None | False | 1868.74 | 0 |
| 3580924 | 130237 | None | EECM79 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3m from tapping point to out let via switch boxMake: Polycab/Finolex/Vguard, | Point | 317.42 | 317.42 | 20.0 | False | None | None | False | None | False | 6348.4 | 0 |
| 3580925 | 130237 | None | EECM80 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3m upto 6m from tapping point to out let via switch box Make: Polycab/Finolex/Vguard, | Point | 447.22 | 447.22 | 26.0 | False | None | None | False | None | False | 11627.72 | 0 |
| 3580926 | 130237 | None | EECM81 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6m upto 10m from tapping point to out let via switch boxMake: Polycab/Finolex/Vguard, | Point | 654.9 | 654.9 | 6.0 | False | None | None | False | None | False | 3929.4 | 0 |
| 3580927 | 130237 | None | EECM82 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch Make: Havells/anchor/GM | Each | 120.36 | 120.36 | 77.0 | False | None | None | False | None | False | 9267.72 | 0 |
| 3580928 | 130237 | None | EECM83 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.RJ45/I.O Outlet Cat-6 Make ; Havells/anchor/GM | Each | 397.66 | 397.66 | 4.0 | False | None | None | False | None | False | 1590.64 | 0 |
| 3580929 | 130237 | None | EECM84 | Supplying and drawing UTP-CAT 6E LAN cable with crimpingMake:Dlink/Finolex/Tplink | Mtr | 44.84 | 44.84 | 360.0 | False | None | None | False | None | False | 16142.4 | 0 |
| 3580930 | 130237 | None | EECM85 | Supplying and fixing of modular switch & connected accessories
on existing modular switch plate as per IS 3854 and IS 1293.MODULAR INDICATION SWICTH/LAMP )make: Havells/anchor/GM | Each | 120.36 | 120.36 | 15.0 | False | None | None | False | None | False | 1805.4 | 0 |
| 3580931 | 130237 | None | EECM86 | Supplying and fixing of modular switch & connected accessories
on existing modular switch plate as per IS 3854 and IS 1293.6A three Way socket make: Havells/anchor/GM | Each | 201.78 | 201.78 | 29.0 | False | None | None | False | None | False | 5851.62 | 0 |
| 3580932 | 130237 | None | EECM87 | Supplying and fixing of modular switch & connected accessories
on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket make: Havells/anchor/GM | Each | 278.48 | 278.48 | 7.0 | False | None | None | False | None | False | 1949.36 | 0 |
| 3580933 | 130237 | None | EECM88 | Supplying and fixing of modular switch & connected accessories
on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch make: Havells/anchor/GM | Each | 384.68 | 384.68 | 7.0 | False | None | None | False | None | False | 2692.76 | 0 |
| 3580934 | 130237 | None | EECM89 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. as per IS 3854 and IS 1293. 16A Three Pin Top make: Havells/anchor/GM | Each | 129.8 | 129.8 | 1.0 | False | None | None | False | None | False | 129.8 | 0 |
| 3580935 | 130237 | None | EECM90 | Wiring for lighting/ power circuit earthing using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core wire in concealed system of wiring using 4 sq mm as per IS - 694 : 1990 and confirming to latest amendmentsMake: Polycab/Finolex/Vguard, | Mtr | 74.34 | 74.34 | 360.0 | False | None | None | False | None | False | 26762.4 | 0 |
| 3580936 | 130237 | None | EECM91 | Wiring for lighting/ power circuit earthing using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core wire in concealed system of wiring using 2.5 sq mm as per IS - 694 : 1990 and confirming to latest amendmentsMake: Polycab/Finolex/Vguard, | Mtr | 49.56 | 49.56 | 200.0 | False | None | None | False | None | False | 9912.0 | 0 |
| 3580937 | 130237 | None | EECM92 | Supplying And fixing 6A Lamp Holder(Slant type) on existing switch Board.Make: GM/ANCHOR/HAVELLS | Each | 83.78 | 83.78 | 28.0 | False | None | None | False | None | False | 2345.84 | 0 |
| 3580938 | 130237 | None | EECM93 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Bakelite Ceiling RoseMake:GM/ANCHOR/HAVELLS | Each | 92.04 | 92.04 | 14.0 | False | None | None | False | None | False | 1288.56 | 0 |
| 3580939 | 130237 | None | EECM94 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 30mA sensitivity on existing wood/ panel board 40A 2 pole Make:Legrend/L&T/Schneider/ABB | Each | 5379.62 | 5379.62 | 1.0 | False | None | None | False | None | False | 5379.62 | 0 |
| 3580940 | 130237 | None | EECM95 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. Make:Legrend/L&T/Schneider,12 Way SP & N Make:Legrend/L&T/Schneider/ABB, | Each | 2198.34 | 2198.34 | 1.0 | False | None | None | False | None | False | 2198.34 | 0 |
| 3580941 | 130237 | None | EECM96 | Supplying of 4 feet PVC Batten with integrated LED tube 22 W along with suitable Tube light adopter with high quality diffuser with Life of 25000 burning hours 70percent lumen maintenance with CRIgreaterthan 80. Power Input: 220-240V@ 50/60Hz Power factor greaterthan 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1x4 22W Make:PHILIPS/BAJAJ/ WIPRO/ CROMPTON | Each | 814.2 | 814.2 | 28.0 | False | None | None | False | None | False | 22797.6 | 0 |
| 3580942 | 130237 | None | EECM97 | Supply and fixing of LED Streetlight luminaire with pressure die cast
aluminium housing body for optimal thermal dissipation. Lamp Compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greaterthan0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 70W System Power consumption. LED Efficiency greater than1301m/w, nominal CRI greater than75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defectworking under standard electrical conditions as mentioned. Fixing to be done using suiatle GI pipe on roof /wall as per site requirements Make:PHILIPS/BAJAJ/WIPRO/CROMPTON | Each | 7070.56 | 7070.56 | 6.0 | False | None | None | False | None | False | 42423.36 | 0 |
| 3580943 | 130237 | None | EECM98 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA On wall/ ceiling / Rafter / Girders | Each | 143.96 | 143.96 | 28.0 | False | None | None | False | None | False | 4030.88 | 0 |
| 3580944 | 130237 | None | EECM99 | Supplying & fixing of 10 A DP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.Make:Legrend/L&T/Schneider, | Each | 872.02 | 872.02 | 2.0 | False | None | None | False | None | False | 1744.04 | 0 |
| 3580945 | 130237 | None | EECM100 | Supplying & fixing of 20 A DP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make:Legrend/L&T/Schneider, | Each | 872.02 | 872.02 | 2.0 | False | None | None | False | None | False | 1744.04 | 0 |
| 3580946 | 130237 | None | EECM101 | GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg | Nos | 876.74 | 876.74 | 2.0 | False | None | None | False | None | False | 1753.48 | 0 |
| 3580947 | 130237 | None | EECM102 | Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each | Bag | 797.68 | 797.68 | 6.0 | False | None | None | False | None | False | 4786.08 | 0 |
| 3580948 | 130237 | None | EECM103 | Good Quality Salt for grounding purposes packed in 50 Kg gunny bag | Bag | 365.8 | 365.8 | 2.0 | False | None | None | False | None | False | 731.6 | 0 |
| 3580949 | 130237 | None | EECM104 | Laying of cable in Existing/ Digging new Trench/PVC Conduit/GI pipe/Stone Ware/HDPE PIPE /RCC Hume pipe using Wooden/Aluminum Rollers termination complete as directed by the departmental staff 4 core LT Cable 2.5 to 25 Sqmm | Km | 27602.94 | 27602.94 | 0.12 | False | None | None | False | None | False | 3312.3528 | 0 |
| 3580950 | 130237 | None | EECM105 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. ORDINARY SOIL | Cum | 319.83 | 319.83 | 36.0 | False | None | None | False | None | False | 11513.88 | 0 |
| 3580951 | 130237 | None | EECM106 | Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operatingMCB along with complete tamper proof SEALING facility. Make: LEGRAND/Any reputed | Nos | 7272.34 | 7272.34 | 1.0 | False | None | None | False | None | False | 7272.34 | 0 |
| 3580952 | 130237 | None | EECM107 | Supply and laying HDMI cable through PVC conduit 15M make:Any reputed | Each | 2242.0 | 2242.0 | 4.0 | False | None | None | False | None | False | 8968.0 | 0 |
| 3580953 | 130237 | None | EECM108 | Supply of 1.1 kV,AL XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-
1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm, 4 Core, (10 GI Strips - 4 x 0.8 mm) Make: FINOLEX/POLY CAB/V GUARD | Km | 139244.72 | 139244.72 | 0.11 | False | None | None | False | None | False | 15316.9192 | 0 |
| 3580954 | 130237 | None | EECM109 | Supplying & Fixing of switch mounting rack with Lan switch 8 port , power manager & Cable manager Size: 9U with 450mm depth Make:D link/Rittal GmbH, | Nos | 10001.68 | 10001.68 | 1.0 | False | None | None | False | None | False | 10001.68 | 0 |
| 3580955 | 130237 | None | EECM110 | Supply and laying of HDPE Pipe 50/42 mm | Km | 100316.52 | 100316.52 | 0.11 | False | None | None | False | None | False | 11034.8172 | 0 |