| 1722420928000 | 0 | None | None | Buildings | Construction of Ladies Hi Tech Toilet near Vidyanagar school old graveyard at Ward No 19 in Sirwar Town | 1688399.44 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3658998 | 133500 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work PWD CSR 2023-24, Vol-I, P. No. 8, I. No. 1.14.1 | Cum | 107.1 | 107.1 | 35.75 | False | None | None | False | None | False | 3828.825 | 0 | | 3658999 | 133500 | None | code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 15, I. No. 2.1.3 | Cum | 6288.45 | 6288.45 | 10.4 | False | None | None | False | None | False | 65399.88 | 0 | | 3659000 | 133500 | None | code03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD CSR 2023-24, Vol-II, P. No. 9, I. No. 5.4 | Cum | 6708.45 | 6708.45 | 11.43 | False | None | None | False | None | False | 76677.5835 | 0 | | 3659001 | 133500 | None | code04 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. PWD CSR 2023-24, Vol-I, P. No. 7, I. No. 1.9 | Cum | 279.3 | 279.3 | 5.38 | False | None | None | False | None | False | 1502.634 | 0 | | 3659002 | 133500 | None | code05 | Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. PWD CSR 2023-24, Vol-I, P. No. 7, I. No. 1.1 | Cum | 454.65 | 454.65 | 5.38 | False | None | None | False | None | False | 2446.017 | 0 | | 3659003 | 133500 | None | code06 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 15, I. No. 2.2.1 | Cum | 6601.35 | 6601.35 | 3.12 | False | None | None | False | None | False | 20596.212 | 0 | | 3659004 | 133500 | None | code07 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 16, I. No. 2.4.2 | Cum | 9958.72 | 9958.72 | 2.113 | False | None | None | False | None | False | 21042.77536 | 0 | | 3659005 | 133500 | None | code08 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 16, I. No. 2.5.1 | Cum | 11138.4 | 11138.4 | 3.564 | False | None | None | False | None | False | 39697.2576 | 0 | | 3659006 | 133500 | None | code09 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. PWD CSR 2023-24, Vol-I, P. No. 16, I. No. 2.5.1 | Cum | 11138.4 | 11138.4 | 6.065 | False | None | None | False | None | False | 67554.396 | 0 | | 3659007 | 133500 | None | code10 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - For Buildings PWD CSR 2023-24, Vol-I, P. No. 18, I. No. 2.11a | MT | 93929.85 | 93929.85 | 1.43 | False | None | None | False | None | False | 134319.6855 | 0 | | 3659008 | 133500 | None | code11 | Providing Brick work with Non Modular fly ash bricks conforming to IS:12894, class designation 5.0 average compressive strength in super structure above plinth level up to floor I level in Cement mortar 1:6 (1cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.PWD CSR 2023-24, Vol-II, P. No. 13, I. No. 6.25 | Cum | 8008.35 | 8008.35 | 17.29 | False | None | None | False | None | False | 138464.3715 | 0 | | 3659009 | 133500 | None | code12 | Half brick masonry with Non Modular fly ash bricks of class designation 5.0, conforming to IS :12894, in super structure above plinth and upto floor I level cement mortar 1 : 3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.. . PWD CSR 2023-24, Vol-II, P. No. 13, I. No. 6.29 | Sqm | 1037.4 | 1037.4 | 19.32 | False | None | None | False | None | False | 20042.568 | 0 | | 3659010 | 133500 | None | code13 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.PWD CSR 2023-24, Vol-II, P. No. 41, I. No. 8.4.2 | Sqm | 327.6 | 327.6 | 125.62 | False | None | None | False | None | False | 41153.112 | 0 | | 3659011 | 133500 | None | code14 | Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge PWD CSR 2023-24, Vol-II, P. No. 42, I. No. 8.7 | Sqm | 384.3 | 384.3 | 70.82 | False | None | None | False | None | False | 27216.126 | 0 | | 3659012 | 133500 | None | code15 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) PWD CSR 2023-24, Vol-II, P. No. 46, I. No. 8.33.1 | Sqm | 165.9 | 165.9 | 196.44 | False | None | None | False | None | False | 32589.396 | 0 | | 3659013 | 133500 | None | code16 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. PWD CSR 2023-24, Vol-II, P. No. 60, I. No. 9.10 | Sqm | 1161.3 | 1161.3 | 20.63 | False | None | None | False | None | False | 23957.619 | 0 | | 3659014 | 133500 | None | code17 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete.PWD CSR 2023-24, Vol-II, P. No. 71, I. No. 10.14 | Sqm | 1161.3 | 1161.3 | 46.83 | False | None | None | False | None | False | 54383.679 | 0 | | 3659015 | 133500 | None | code18 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. PWD CSR 2023-24, Vol-II, P. No. 86, I. No. 11.34B | Kgs | 192.15 | 192.15 | 37.8 | False | None | None | False | None | False | 7263.27 | 0 | | 3659016 | 133500 | None | code19 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm ( 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section PWD CSR 2023-24, Vol-II, P. No. 108, I. No. 12.83.2 | m | 250.95 | 250.95 | 25.5 | False | None | None | False | None | False | 6399.225 | 0 | | 3659017 | 133500 | None | code20 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.with one side prelam. PWD CSR 2023-24, Vol-II, P. No. 106, I. No. 12.55.2 | Sqm | 2998.8 | 2998.8 | 9.45 | False | None | None | False | None | False | 28338.66 | 0 | | 3659018 | 133500 | None | code21 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) PWD CSR 2023-24, Vol-II, P. No. 108, I. No. 12.84 | Sqm | 5274.15 | 5274.15 | 1.8 | False | None | None | False | None | False | 9493.47 | 0 | | 3659019 | 133500 | None | code22 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) PWD CSR 2023-24, Vol-II, P. No. 109, I. No. 12.85 | Sqm | 6004.95 | 6004.95 | 1.35 | False | None | None | False | None | False | 8106.6825 | 0 | | 3659020 | 133500 | None | code23 | Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length, 20mm NB PWD CSR 2023-24, Vol-II, P. No. 118, I. No. 13.8.2.2 | No | 115.5 | 115.5 | 5.0 | False | None | None | False | None | False | 577.5 | 0 | | 3659021 | 133500 | None | code24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia pipes )PWD CSR 2023-24, Vol-II, P. No. 122, I. No. 13.32.3) | m | 500.85 | 500.85 | 20.0 | False | None | None | False | None | False | 10017.0 | 0 | | 3659022 | 133500 | None | code25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia pipes (PWD CSR 2023-24, Vol-II, P. No. 122, I. No. 13.33.4) | m | 390.6 | 390.6 | 20.0 | False | None | None | False | None | False | 7812.0 | 0 | | 3659023 | 133500 | None | code26 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. PWD CSR 2023-24, Vol-II, P. No. 123, I. No. 13.34 | l | 9.45 | 9.45 | 1000.0 | False | None | None | False | None | False | 9450.0 | 0 | | 3659024 | 133500 | None | code27 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion, (i) single socketed pipes 100 mm diameter PWD CSR 2023-24, Vol-II, P. No. 125, I. No. 13.48 | m | 305.55 | 305.55 | 7.2 | False | None | None | False | None | False | 2199.96 | 0 | | 3659025 | 133500 | None | code28 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete PWD CSR 2023-24, Vol-II, P. No. 127, I. No. 13.59 | Each | 231.0 | 231.0 | 5.0 | False | None | None | False | None | False | 1155.0 | 0 | | 3659026 | 133500 | None | code29 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge Orissa pattern W.C Pan of size 580x440 mm (PWD CSR 2023-24, Vol-II, P. No. 202, I. No. 20.44.2) | Each | 3724.35 | 3724.35 | 3.0 | False | None | None | False | None | False | 11173.05 | 0 | | 3659027 | 133500 | None | code30 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid PWD CSR 2023-24, Vol-II, P. No. 131, I. No. 14.3.1 | Each | 6275.85 | 6275.85 | 2.0 | False | None | None | False | None | False | 12551.7 | 0 | | 3659028 | 133500 | None | code31 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps PWD CSR 2023-24, Vol-II, P. No. 132, I. No. 14.7.1 | Each | 3236.1 | 3236.1 | 1.0 | False | None | None | False | None | False | 3236.1 | 0 | | 3659029 | 133500 | None | code32 | Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Economy Class PWD CSR 2023-24, Vol-II, P. No. 139, I. No. 14.55a | No | 1172.85 | 1172.85 | 5.0 | False | None | None | False | None | False | 5864.25 | 0 | | 3659030 | 133500 | None | code33 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mmsizes respectively with automatic flushing cistern with standard flushpipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern (PWD CSR 2023-24, Vol-II, P. No. 131, I. No. 14.4.1) | Each | 4676.7 | 4676.7 | 3.0 | False | None | None | False | None | False | 14030.1 | 0 | | 3659031 | 133500 | None | code34 | Concealed PVC Conduit System Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2mm thick (P.no.2.it.no.1.1.1) (PWD CSR for Electrical Works for the Year 2023-24) | m | 72.45 | 72.45 | 60.0 | False | None | None | False | None | False | 4347.0 | 0 | | 3659032 | 133500 | None | code35 | PVC/metal conduit Deep Junction Box Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box (P.no.2.it.no.1.5) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 51.45 | 51.45 | 30.0 | False | None | None | False | None | False | 1543.5 | 0 | | 3659033 | 133500 | None | code36 | Flush Mounting Wooden Box Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 8" x 6" x 3" (203 x 152 x 76 mm) (P.no.3.it.no.1.6.4) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 90.3 | 90.3 | 15.0 | False | None | None | False | None | False | 1354.5 | 0 | | 3659034 | 133500 | None | code37 | Flush Mounting Wooden Box Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 4" x 4" x 3" ( 101 x 101 x 76 mm) (P.no.3.it.no.1.6.6) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 77.7 | 77.7 | 10.0 | False | None | None | False | None | False | 777.0 | 0 | | 3659035 | 133500 | None | code38 | Wiring for Lightings/Power Circuit Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 Sqmm (P.no.5.it.no.2.3.2) (PWD CSR for Electrical Works for the Year 2023-24) | m | 27.3 | 27.3 | 100.0 | False | None | None | False | None | False | 2730.0 | 0 | | 3659036 | 133500 | None | code39 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 Sqmm (P.no.5.it.no.2.3.3) (PWD CSR for Electrical Works for the Year 2023-24) | m | 44.1 | 44.1 | 80.0 | False | None | None | False | None | False | 3528.0 | 0 | | 3659037 | 133500 | None | code40 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4 Sqmm (P.no.5.it.no.2.3.4) (PWD CSR for Electrical Works for the Year 2023-24) | m | 66.15 | 66.15 | 50.0 | False | None | None | False | None | False | 3307.5 | 0 | | 3659038 | 133500 | None | code41 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way (P.no.9.it.no.3.6.1) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 107.1 | 107.1 | 10.0 | False | None | None | False | None | False | 1071.0 | 0 | | 3659039 | 133500 | None | code42 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps two way. (P.no.9.it.no.3.6.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 174.3 | 174.3 | 10.0 | False | None | None | False | None | False | 1743.0 | 0 | | 3659040 | 133500 | None | code43 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch (P.no.9.it.no.3.6.7) .(PWD CSR for Electrical Works for the Year 2023-24) | Each | 189.0 | 189.0 | 5.0 | False | None | None | False | None | False | 945.0 | 0 | | 3659041 | 133500 | None | code44 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch. (P.no.9.it.no.3.6.9) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 342.3 | 342.3 | 5.0 | False | None | None | False | None | False | 1711.5 | 0 | | 3659042 | 133500 | None | code45 | 4mm Thick Plastic Sheets Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. (P.no.9.it.no.3.8) (PWD CSR for Electrical Works for the Year 2023-24) | Sq CM | 0.43 | 0.43 | 1200.0 | False | None | None | False | None | False | 516.0 | 0 | | 3659043 | 133500 | None | code46 | Porcelain Fuse Channel Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps (P.no.10.it.no.5.7.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 253.05 | 253.05 | 5.0 | False | None | None | False | None | False | 1265.25 | 0 | | 3659044 | 133500 | None | code47 | Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps SP (p.no.17.it.no.5.18) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 435.75 | 435.75 | 3.0 | False | None | None | False | None | False | 1307.25 | 0 | | 3659045 | 133500 | None | code48 | Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps DP .(p.no.17.it.no.5.18.4) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 775.95 | 775.95 | 2.0 | False | None | None | False | None | False | 1551.9 | 0 | | 3659046 | 133500 | None | code49 | MCB Distribution Boards Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.I - Single Door 8 Way SP & N (p.no.18.it.no.5.19.3)(PWD CSR for Electrical Works for the Year 2023-24) | Each | 1566.6 | 1566.6 | 1.0 | False | None | None | False | None | False | 1566.6 | 0 | | 3659047 | 133500 | None | code50 | PVC Batten with LED Tubes Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4'- 20/22 w (p.no.43.it.no.11.3.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 724.5 | 724.5 | 6.0 | False | None | None | False | None | False | 4347.0 | 0 | | 3659048 | 133500 | None | code51 | LED Down Lights Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W (p.no.43.it.no.11.5.3) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 1390.2 | 1390.2 | 10.0 | False | None | None | False | None | False | 13902.0 | 0 | | 3659049 | 133500 | None | code52 | Lamp Holder Supplying & Fixing of 70-150 Watts lamp holder 2 Pin (p.no.52.it.no.12.46) (PWD CSR for Electrical Works for the Year 2023-24) | No | 66.15 | 66.15 | 15.0 | False | None | None | False | None | False | 992.25 | 0 | | 3659050 | 133500 | None | code53 | Fixing all type of Luminaries Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders (p.no.56.it.no.13.7.1) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 128.1 | 128.1 | 6.0 | False | None | None | False | None | False | 768.6 | 0 | | 3659051 | 133500 | None | code54 | Fixing of LED Lights Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps..(p.no.58.it.no.13.19) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 514.5 | 514.5 | 5.0 | False | None | None | False | None | False | 2572.5 | 0 | | 3659052 | 133500 | None | code55 | Supplying exhaust fan of1440RPM of 300mm(12") size with bracket blades complete for light duty suitable to operateon 230V50Hz, AC Supply. (PWD CSR for Electrical Works for the Year 2023-24 P.no.30.it.no.6.1) | Each | 1566.6 | 1566.6 | 2.0 | False | None | None | False | None | False | 3133.2 | 0 | | 3659053 | 133500 | None | code56 | Supplying,fixing and wiring Electronic Trivector Meter(ETV) 5to32/63A three phase4 wire whole current class-1 Accuracy EnergyMeter. (PWD CSR for Electrical Works for the Year 2023-24 P.no.30.it.no.5.35) | Each | 5990.25 | 5990.25 | 1.0 | False | None | None | False | None | False | 5990.25 | 0 | | 3659054 | 133500 | None | code57 | Supplying,fixing,wiring,earthelectrode for grounding conduits,I.C.cut out sand other equipment's on the meter board using40mmdia 2.90mmthick GIpipe2.5m long buried inapit. The pit should be filled with equal proportion of saltand charcoal 150mm all-round the pipeto complete depth. The connection from the pipe to the conduitetc., is to be established through GI wire of size as perlSI specification7.3.3.of IS732 using12mm dia bolts, nuts, washers and checknuts etc., the pipe shall have 16 through holes of 12 mm dia . (PWD CSR for Electrical Works for the Year 2023-24 P.no.54.it.no.12.56) | No | 3685.5 | 3685.5 | 1.0 | False | None | None | False | None | False | 3685.5 | 0 | | 3659055 | 133500 | None | code58 | Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or,Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE:1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. WS-UGD/DSR/2023-24 VOL-5 Pg.No.140, I.No.12.4 | Each | 5552.4 | 5552.4 | 1.0 | False | None | None | False | None | False | 5552.4 | 0 | | 3659056 | 133500 | None | code59 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) WS-UGD/DSR/2021-22 VOL-5 Pg.No.151, I.No.1,SOR Code:O010 | m | 388.5 | 388.5 | 50.0 | False | None | None | False | None | False | 19425.0 | 0 | | 3659057 | 133500 | None | code60 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) WS-UGD/DSR/2021-22 VOL-5 Pg.No.151, I.No.1,SOR Code:O010 | m | 487.2 | 487.2 | 15.0 | False | None | None | False | None | False | 7308.0 | 0 | | 3659058 | 133500 | None | code61 | Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m | Cum | 275.1 | 275.1 | 12.0 | False | None | None | False | None | False | 3301.2 | 0 | | 3659059 | 133500 | None | code62 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications | Cum | 168.0 | 168.0 | 12.0 | False | None | None | False | None | False | 2016.0 | 0 | | 3659060 | 133500 | None | code63 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.160mm(weight of pipe -2.753 kg) WS-UGD/DSR/2023-24 VOL-5 Pg.No.120, I.No.10.14.6, | m | 513.45 | 513.45 | 20.0 | False | None | None | False | None | False | 10269.0 | 0 | | 3659061 | 133500 | None | code64 | Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. 1.00 HP/0.75KW,7 STG WS-UGD/DSR/2023-24 VOL-5 Pg.No.149, I.No.13.6.1, | No | 13983.9 | 13983.9 | 1.0 | False | None | None | False | None | False | 13983.9 | 0 | | 3659062 | 133500 | None | code65 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLDirect Online Starter 2)S-D- Star Delta Starter a) single phase preventor b) Voltameter preventor c) Motor (0 to 60 Amp) d) Viual indicator e) Lamp holder f) Danger board confirming g) Earthing box h) Power capacitor.WS-UGD/DSR/2023-24 VOL-5 Pg.No.154, I.No.13.23.1 | Each | 6825.0 | 6825.0 | 1.0 | False | None | None | False | None | False | 6825.0 | 0 | | 3659063 | 133500 | None | code66 | Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5 m2.WS-UGD/DSR/2023-24 VOL-5 Pg.No.154, I.No.13.22.2 | m | 89.25 | 89.25 | 60.0 | False | None | None | False | None | False | 5355.0 | 0 | | 3659064 | 133500 | None | code67 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 107.1 | 107.1 | 37.19 | False | None | None | False | None | False | 3983.049 | 0 | | 3659065 | 133500 | None | code68 | Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work | Cum | 89.25 | 89.25 | 24.26 | False | None | None | False | None | False | 2165.205 | 0 | | 3659066 | 133500 | None | code69 | Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. | Cum | 110.25 | 110.25 | 16.17 | False | None | None | False | None | False | 1782.7425 | 0 | | 3659067 | 133500 | None | code70 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 | Cum | 517.65 | 517.65 | 24.26 | False | None | None | False | None | False | 12558.189 | 0 | | 3659068 | 133500 | None | code71 | Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) | Sqm | 1219.05 | 1219.05 | 144.38 | False | None | None | False | None | False | 176006.439 | 0 | | 3659069 | 133500 | None | code72 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.) Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6527.85 | 6527.85 | 2.66 | False | None | None | False | None | False | 17364.081 | 0 | | 3659070 | 133500 | None | code73 | Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. | Cum | 107.1 | 107.1 | 51.84 | False | None | None | False | None | False | 5552.064 | 0 | | 3659071 | 133500 | None | code74 | Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work | Cum | 89.25 | 89.25 | 25.92 | False | None | None | False | None | False | 2313.36 | 0 | | 3659072 | 133500 | None | code75 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 40 mm and down size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 8.64 | False | None | None | False | None | False | 54332.208 | 0 | | 3659073 | 133500 | None | code76 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates | Cum | 6601.35 | 6601.35 | 21.62 | False | None | None | False | None | False | 142721.187 | 0 | | 3659074 | 133500 | None | code77 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation/Substructure/ Superstructure complete as per Drawing and Technical Specifications. | MT | 90754.65 | 90754.65 | 1.473 | False | None | None | False | None | False | 133681.59945 | 0 | | 3659075 | 133500 | None | code78 | As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate for drain formworks considered 5%. | Sqm | 328.4 | 328.4 | 270.12 | False | None | None | False | None | False | 88707.408 | 0 |
|