| 3627761 | 131871 | None | code01 | EARTH WORK- 1.1 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. SR 2023-24 | Cum | 93.73 | 93.73 | 420.6404 | False | None | None | False | None | False | 39426.624692 | 0 |
| 3627762 | 131871 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Item 2.1 Mix 1:3;6( M10) Using 40 mm nominal size graded crushed coarse aggregates 2.1.2 SR 2023-24 | Cum | 5833.92 | 5833.92 | 84.228 | False | None | None | False | None | False | 491379.41376 | 0 |
| 3627763 | 131871 | None | code03 | 2.3 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and
fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.
Appendix I Additionalities for Formwork, Centering & Scaffolding.Foundation upto Plinth- a. Isolated | Cum | 7208.35 | 7208.35 | 78.8729 | False | None | None | False | None | False | 568543.468715 | 0 |
| 3627764 | 131871 | None | code04 | Providing and laying 60mm thick factory made cement concrete paver
block of approved shape and colour of M -30 grade made of C&D waste
by block making machine with vibratory compaction laid in required
pattern and including over 50mm thick compacted bed of coarse sand,
filling the joints with fine sand etc. all complete as per the direction of
Engineer-in-charge | Sqm | 824.0 | 824.0 | 117.5 | False | None | None | False | None | False | 96820.0 | 0 |
| 3627765 | 131871 | None | code05 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine
mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,
Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6475.61 | 6475.61 | 22.5145 | False | None | None | False | None | False | 145795.121345 | 0 |
| 3627766 | 131871 | None | code06 | 2.3 Providing and laying in Reinforced cement concrete for all Basement
& surface level works, return walls, retaining walls, sunken floors
etc. The granite/trap/basalt crushed graded coarse aggregates and
fine aggregates as per relevant IS Codes machine mixed with super
plasticisers, laid in layers, well compacted using needle vibrators,
providing weep holes wherever necesary, including all lead & lifts, cost
of all materials of quality, labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per
technical specifications. (The cost of steel reinforcement & formwork
to be paid separately) 2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse
aggregates SR 2023-24.
Appendix I Additionalities for Formwork, Centering & Scaffolding .
Plinth beam of buildings- ( Revised ). | Cum | 10011.6 | 10011.6 | 41.121 | False | None | None | False | None | False | 411687.0036 | 0 |
| 3627767 | 131871 | None | code07 | 2.5 Providing and laying in position Reinforced cement concrete for all
Super structures of building , Road works, Water works, Irrigation works
& super structure works of bridges upto 3.50 m height. The granite/
trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in
layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements
of relevant IS codes , labour, Usage charges of machinery, curing and
all other appurtenances required to complete the work as per technical
specifications. (The cost of steel reinforcement, dowel bars & formwork
to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse
aggregates SR 2023-24.
Appendix I Additionalities for Formwork, Centering & Scaffolding .
Columns - 70% - (Revised).
Earth retaining strutures -10% (Revised) | Cum | 11982.09 | 11982.09 | 28.1159 | False | None | None | False | None | False | 336887.244231 | 0 |
| 3627768 | 131871 | None | code08 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Page no.9, Item no.5.4 PWD SR 2023-24 Volume 2 | Cum | 6580.67 | 6580.67 | 35.649 | False | None | None | False | None | False | 234594.30483 | 0 |
| 3627769 | 131871 | None | code09 | 2.5 Providing and laying in position Reinforced cement concrete for all
Super structures of building , Road works, Water works, Irrigation works
& super structure works of bridges upto 3.50 m height. The granite/
trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in
layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements
of relevant IS codes , labour, Usage charges of machinery, curing and
all other appurtenances required to complete the work as per technical
specifications. (The cost of steel reinforcement, dowel bars & formwork
to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR 2023-24. Appendix I Additionalities for Formwork, Centering & Scaffolding . Architectural projection of major sections-30% | Cum | 9162.77 | 9162.77 | 5.1052 | False | None | None | False | None | False | 46777.773404 | 0 |
| 3627770 | 131871 | None | code10 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation withall lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. | Cum | 488.22 | 488.22 | 99.4347 | False | None | None | False | None | False | 48546.009234 | 0 |
| 3627771 | 131871 | None | code11 | 1.9 Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations and other similar works etc. in layers not exceeding
20cm in depth, consolidating each deposited layer by ramming and
watering, lead up to 50 m and lift upto 1.5 m. SR 2023-24 | Cum | 273.98 | 273.98 | 373.65 | False | None | None | False | None | False | 102372.627 | 0 |
| 3627772 | 131871 | None | code12 | 6.5 Providing Brick work with common burnt clay machine moulded
perforated bricks of class designation 5.0 conforming to IS: 2222 in
superstructure above plinth level in cement mortar 1:6 (1 cement : 6
coarse sand) With Non modular bricks including cost of all materials,
labour, scaffolding and usage charges of machinery & other incidental
charges complete as per the direction of engineer incharge of work. SR 2023-24 | Cum | 11306.31 | 11306.31 | 109.1519 | False | None | None | False | None | False | 1234105.218489 | 0 |
| 3627773 | 131871 | None | code13 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.DSR 2023-24 | Sqm | 1063.99 | 1063.99 | 75.6 | False | None | None | False | None | False | 80437.644 | 0 |
| 3627774 | 131871 | None | code14 | 2.5 Providing and laying in position Reinforced cement concrete for all
Super structures of building , Road works, Water works, Irrigation works
& super structure works of bridges upto 3.50 m height. The granite/
trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in
layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements
of relevant IS codes , labour, Usage charges of machinery, curing and
all other appurtenances required to complete the work as per technical
specifications. (The cost of steel reinforcement, dowel bars & formwork
to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR 2023-24. Appendix I Additionalities for Formwork, Centering & Scaffolding Beams & Lintels of Building- 60% (Revised) | Cum | 11277.26 | 11277.26 | 41.121 | False | None | None | False | None | False | 463732.20846 | 0 |
| 3627775 | 131871 | None | code15 | 2.5 Providing and laying in position Reinforced cement concrete for all
Super structures of building , Road works, Water works, Irrigation works
& super structure works of bridges upto 3.50 m height. The granite/
trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in
layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements
of relevant IS codes , labour, Usage charges of machinery, curing and
all other appurtenances required to complete the work as per technical
specifications. (The cost of steel reinforcement, dowel bars & formwork
to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR 2023-24. Appendix I Additionalities for Formwork, Centering & Scaffolding. Slabs- 50% (revised) Chejjas, Canopy & Other Architectural projections of minor sections- 45% | Cum | 10572.43 | 10572.43 | 81.7799 | False | None | None | False | None | False | 864612.268157 | 0 |
| 3627776 | 131871 | None | code16 | 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Building | Tonne | 92140.71 | 92140.71 | 32.6196 | False | None | None | False | None | False | 3005593.103916 | 0 |
| 3627777 | 131871 | None | code17 | 11.6.1 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and
jointed together at the end by end locks, mounted on specially
designed pipe shaft with brackets, side guides and arrangements for
inside and outside locking with push and pull operation complete,
including the cost of providing and fixing necessary 27.5 cm long
wire springs manufactured from high tensile steel wire of adequate
strength conforming to IS: 4454 - part 1 and M.S. top cover of required
thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm
thick top cover including cost of materials, labour, usage charges of
machinery complete as per specifications and as per directions of the
Engineer-in-Charge. | Sqm | 2711.99 | 2711.99 | 88.75 | False | None | None | False | None | False | 240689.1125 | 0 |
| 3627778 | 131871 | None | code18 | 11.35.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/
appropriate sections and other sections of approved make conforming
to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. SR 2023-24 | Kg | 588.13 | 588.13 | 5.12 | False | None | None | False | None | False | 3011.2256 | 0 |
| 3627779 | 131871 | None | code19 | 11.37.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. SR 2023-24 | Sqm | 1017.64 | 1017.64 | 5.12 | False | None | None | False | None | False | 5210.3168 | 0 |
| 3627780 | 131871 | None | code20 | 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR 2023-24 | Sqm | 364.62 | 364.62 | 493.384 | False | None | None | False | None | False | 179897.67408 | 0 |
| 3627781 | 131871 | None | code21 | 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3
coarse sand) finished with a floating coat of neat cement on the rough
side of single or half brick wall including rounding off corners wherever
required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge. SR 2023-24 | Sqm | 376.98 | 376.98 | 1125.28 | False | None | None | False | None | False | 424208.0544 | 0 |
| 3627782 | 131871 | None | code22 | 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:
4 fine sand) to brick masonry including rounding off corners wherever
required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge. SR 2023-24 | Sqm | 262.65 | 262.65 | 498.2 | False | None | None | False | None | False | 130852.23 | 0 |
| 3627783 | 131871 | None | code23 | 8.51 Providing and applying white cement based putty of average
thickness 1 mm, of approved brand and manufacturer, over the
plastered wall surface to prepare the surface even and smooth
complete as per specifications and as per directions of Engineer in
charge. | Sqm | 103.0 | 103.0 | 1623.48 | False | None | None | False | None | False | 167218.44 | 0 |
| 3627784 | 131871 | None | code24 | 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by
the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. SR 2023-24. ( @ 66%, 20mm grey granite 20%, 20mm thick black granite 14%) with nosing | Sqm | 2937.56 | 2937.56 | 20.1825 | False | None | None | False | None | False | 59287.3047 | 0 |
| 3627785 | 131871 | None | code25 | 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after
thoroughly brooming the surface to remove all dirt, dust, mortar drops.and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 291.49 | 291.49 | 493.384 | False | None | None | False | None | False | 143816.50216 | 0 |
| 3627786 | 131871 | None | code26 | 8.35.2 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered
surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.8.35.2 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR 2023-24 | Sqm | 203.94 | 203.94 | 1623.48 | False | None | None | False | None | False | 331092.5112 | 0 |
| 3627787 | 131871 | None | code27 | 8.35.2 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered
surfaces :Two coats with paint of approved quality to give an even
shade, after thoroughly brooming the surface to remove all dirt, dust,
mortar drops and foreign matter including preparing the surface even
and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge.8.35.2 Painting with silicon & acrylic emulsion based water thinnable sealer of
approved brand and manufacture on wet or patchy portion of plastered
surfaces :Two coats with paint of approved quality to give an even
shade, after thoroughly brooming the surface to remove all dirt, dust,
mortar drops and foreign matter including preparing the surface even
and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge. SR 2023-24 | Sqm | 203.94 | 203.94 | 498.2 | False | None | None | False | None | False | 101602.908 | 0 |
| 3627788 | 131871 | None | code28 | 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.SR 2023-24 | Kg | 173.04 | 173.04 | 11.34 | False | None | None | False | None | False | 1962.2736 | 0 |
| 3627789 | 131871 | None | code29 | 8.40 Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :Two coats on new work after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
and foreign matter including preparing the surface even and sand paper
smooth, cost of materials, labour complete as per specifications and as
per directions of Engineer-in-charge. | Sqm | 118.45 | 118.45 | 88.75 | False | None | None | False | None | False | 10512.4375 | 0 |
| 3627790 | 131871 | None | code30 | 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing,
polishing and making curvature (wherever required) and fitting the
same with necessary stainless steel nuts and bolts complete, i/c fixing
the railing with necessary accessories & stainless steel dash fasteners,
stainless steel bolts etc., of required size, on the top of the floor or
the side of waist slab with suitable arrangement as per approval of
Engineer-in- charge, (for payment purpose only weight of stainless steel
members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges
of machinery complete as per specifications and as per directions of
the Engineer-in-Charge. | Kg | 581.95 | 581.95 | 92.4 | False | None | None | False | None | False | 53772.18 | 0 |
| 3627791 | 131871 | None | code31 | 14.2 Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and fixtures
complete, including cutting and making good the walls and floors
wherever required :14.2.2 W.C. pan with ISI marked black solid plastic seat and lid . SR 2023-24 | No | 4980.05 | 4980.05 | 2.0 | False | None | None | False | None | False | 9960.1 | 0 |
| 3627792 | 131871 | None | code32 | 14.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require: 14.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps . SR 2023-24 | No | 3174.46 | 3174.46 | 3.0 | False | None | None | False | None | False | 9523.38 | 0 |
| 3627793 | 131871 | None | code33 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittingsw standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556,C.I. trap with outlet grating and other coupling in C.P. brass. including painting of fittings and cutting and making good the walls and floors wherever required: | No | 8901.26 | 8901.26 | 3.0 | False | None | None | False | None | False | 26703.78 | 0 |
| 3627794 | 131871 | None | code34 | 9.17 Providing and laying Vitrified tiles in different sizes (thickness to be
specified by manufacturer), with water absorption less than 0.08 % and
conforming to I.S. 15622, of approved make, in all colours & shade,
over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),
jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint
with white cement & matching pigments etc. complete. 9.17.2 Size of Tile 600x600 mm . SR 2023-24 | Sqm | 1210.25 | 1210.25 | 304.3846 | False | None | None | False | None | False | 368381.46215 | 0 |
| 3627795 | 131871 | None | code35 | FIRST FLOOR 2.5 Providing and laying in position Reinforced cement concrete for all
Super structures of building , Road works, Water works, Irrigation works
& super structure works of bridges upto 3.50 m height. The granite/
trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in
layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements
of relevant IS codes , labour, Usage charges of machinery, curing and
all other appurtenances required to complete the work as per technical
specifications. (The cost of steel reinforcement, dowel bars & formwork
to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR 2023-24. Appendix I Additionalities for Formwork, Centering & Scaffolding . Columns - 70% - (Revised). | Cum | 12101.91 | 12101.91 | 20.447 | False | None | None | False | None | False | 247447.75377 | 0 |
| 3627796 | 131871 | None | code36 | 6.5 Providing Brick work with common burnt clay machine moulded
perforated bricks of class designation 5.0 conforming to IS: 2222 in
superstructure above plinth level in cement mortar 1:6 (1 cement : 6
coarse sand) With Non modular bricks including cost of all materials,
labour, scaffolding and usage charges of machinery & other incidental
charges complete as per the direction of engineer incharge of work. SR 2023-24 | Cum | 11419.37 | 11419.37 | 101.1599 | False | None | None | False | None | False | 1155182.327263 | 0 |
| 3627797 | 131871 | None | code37 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.DSR 2023-24 | Sqm | 1074.62 | 1074.62 | 86.74 | False | None | None | False | None | False | 93212.5388 | 0 |
| 3627798 | 131871 | None | code38 | 2.5 Providing and laying in position Reinforced cement concrete for all
Super structures of building , Road works, Water works, Irrigation works
& super structure works of bridges upto 3.50 m height. The granite/
trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in
layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements
of relevant IS codes , labour, Usage charges of machinery, curing and
all other appurtenances required to complete the work as per technical
specifications. (The cost of steel reinforcement, dowel bars & formwork
to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR 2023-24. Appendix I Additionalities for Formwork, Centering & Scaffolding Chejjas, Canopy & Other Architectural projections of minor sections- 45% | Cum | 10322.22 | 10322.22 | 0.135 | False | None | None | False | None | False | 1393.4997 | 0 |
| 3627799 | 131871 | None | code39 | 2.5 Providing and laying in position Reinforced cement concrete for all
Super structures of building , Road works, Water works, Irrigation works
& super structure works of bridges upto 3.50 m height. The granite/
trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in
layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements
of relevant IS codes , labour, Usage charges of machinery, curing and
all other appurtenances required to complete the work as per technical
specifications. (The cost of steel reinforcement, dowel bars & formwork
to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR 2023-24. Appendix I Additionalities for Formwork, Centering & Scaffolding Beams & Lintels of Building- 60% (Revised) | Cum | 11390.03 | 11390.03 | 0.1242 | False | None | None | False | None | False | 1414.641726 | 0 |
| 3627800 | 131871 | None | code40 | 2.5 Providing and laying in position Reinforced cement concrete for all
Super structures of building , Road works, Water works, Irrigation works
& super structure works of bridges upto 3.50 m height. The granite/
trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in
layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements
of relevant IS codes , labour, Usage charges of machinery, curing and
all other appurtenances required to complete the work as per technical
specifications. (The cost of steel reinforcement, dowel bars & formwork
to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR 2023-24. Appendix I Additionalities for Formwork, Centering & Scaffolding Beams & Lintels of Building- 60% (Revised) | Cum | 11390.03 | 11390.03 | 29.268 | False | None | None | False | None | False | 333363.39804 | 0 |
| 3627801 | 131871 | None | code41 | 2.5 Providing and laying in position Reinforced cement concrete for all
Super structures of building , Road works, Water works, Irrigation works
& super structure works of bridges upto 3.50 m height. The granite/
trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticisers laid in
layers, well compacted using needle vibrators. The cost includes all
lead & lifts, cost of all materials, quality confirming to the requirements
of relevant IS codes , labour, Usage charges of machinery, curing and
all other appurtenances required to complete the work as per technical
specifications. (The cost of steel reinforcement, dowel bars & formwork
to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SR 2023-24. Appendix I Additionalities for Formwork, Centering & Scaffolding. Slabs- 50% (revised) Chejjas, Canopy & Other Architectural projections of minor sections- 45% | Cum | 10678.15 | 10678.15 | 52.47 | False | None | None | False | None | False | 560282.5305 | 0 |
| 3627802 | 131871 | None | code42 | 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Building | Tonne | 93062.11 | 93062.11 | 11.5763 | False | None | None | False | None | False | 1077314.903993 | 0 |
| 3627803 | 131871 | None | code43 | 11.6.1 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially
designed pipe shaft with brackets, side guides and arrangements for
inside and outside locking with push and pull operation complete,
including the cost of providing and fixing necessary 27.5 cm long
wire springs manufactured from high tensile steel wire of adequate
strength conforming to IS: 4454 - part 1 and M.S. top cover of required
thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm
thick top cover including cost of materials, labour, usage charges of
machinery complete as per specifications and as per directions of the
Engineer-in-Charge. | Sqm | 2739.1 | 2739.1 | 71.0 | False | None | None | False | None | False | 194476.1 | 0 |
| 3627804 | 131871 | None | code44 | 11.35.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/
appropriate sections and other sections of approved make conforming
to IS: 733 and IS:1285, fixing with dash fasteners of required dia
and size, including necessary filling up the gaps at junctions, i.e.
at top, bottom and sides with required EPDM rubber/ neoprene
gasket etc. Aluminium sections shall be smooth, rust free, straight,
mitred and jointed mechanically wherever required including cleat
angle, Aluminium snap beading for glazing / paneling, C.P. brass
/ stainless steel screws, all complete as per architectural drawings and
the directions of Engineer-in-charge. (Glazing, paneling and dash
fasteners to be paid for separately) :For shutters of doors, windows
& ventilators including providing and fixing hinges/ pivots and making
provision for fixing of fittings wherever required including the cost of
EPDM rubber / neoprene gasket required (Fittings shall be paid for
separately) Powder coated aluminium (minimum thickness of powder
coating 50 micron) including cost of materials, labour, usage charges
of machinery complete as per specifications. SR 2023-24 | Kg | 594.01 | 594.01 | 17.28 | False | None | None | False | None | False | 10264.4928 | 0 |
| 3627805 | 131871 | None | code45 | 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required
smooth rendering, providing and removing scaffolding, including cost
of materials, labour, curing complete as per specifications and as per
directions of Engineer-in-charge. SR 2023-24 | Sqm | 368.26 | 368.26 | 440.245 | False | None | None | False | None | False | 162124.6237 | 0 |
| 3627806 | 131871 | None | code46 | 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3
coarse sand) finished with a floating coat of neat cement on the rough
side of single or half brick wall including rounding off corners wherever
required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge. SR 2023-24 | Sqm | 380.74 | 380.74 | 669.604 | False | None | None | False | None | False | 254945.02696 | 0 |
| 3627807 | 131871 | None | code47 | 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:
4 fine sand) to brick masonry including rounding off corners wherever
required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge. SR 2023-24 | Sqm | 265.27 | 265.27 | 349.8 | False | None | None | False | None | False | 92791.446 | 0 |
| 3627808 | 131871 | None | code48 | 8.51 Providing and applying white cement based putty of average
thickness 1 mm, of approved brand and manufacturer, over the
plastered wall surface to prepare the surface even and smooth
complete as per specifications and as per directions of Engineer in
charge. | Sqm | 104.03 | 104.03 | 1019.404 | False | None | None | False | None | False | 106048.59812 | 0 |
| 3627809 | 131871 | None | code49 | 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after
thoroughly brooming the surface to remove all dirt, dust, mortar drops.and foreign matter including preparing the surface even and sand paper
smooth, cost of materials, labour complete as per specifications and as
per directions of Engineer-in-charge. | Sqm | 294.4 | 294.4 | 440.245 | False | None | None | False | None | False | 129608.128 | 0 |
| 3627810 | 131871 | None | code50 | 8.35.2 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered
surfaces :Two coats with paint of approved quality to give an even
shade, after thoroughly brooming the surface to remove all dirt, dust,
mortar drops and foreign matter including preparing the surface even
and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge.8.35.2 Painting with silicon & acrylic emulsion based water thinnable sealer of
approved brand and manufacture on wet or patchy portion of plastered
surfaces :Two coats with paint of approved quality to give an even
shade, after thoroughly brooming the surface to remove all dirt, dust,
mortar drops and foreign matter including preparing the surface even
and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge. SR 2023-24 | Sqm | 205.97 | 205.97 | 669.604 | False | None | None | False | None | False | 137918.33588 | 0 |
| 3627811 | 131871 | None | code51 | 8.35.2 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered
surfaces :Two coats with paint of approved quality to give an even
shade, after thoroughly brooming the surface to remove all dirt, dust,
mortar drops and foreign matter including preparing the surface even
and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge.8.35.2 Painting with silicon & acrylic emulsion based water thinnable sealer of
approved brand and manufacture on wet or patchy portion of plastered
surfaces :Two coats with paint of approved quality to give an even
shade, after thoroughly brooming the surface to remove all dirt, dust,
mortar drops and foreign matter including preparing the surface even
and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge. SR 2023-24 | Sqm | 205.97 | 205.97 | 349.8 | False | None | None | False | None | False | 72048.306 | 0 |
| 3627812 | 131871 | None | code52 | 11.37.1 Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with EPDM rubber / neoprene gasket
etc. complete as per the architectural drawings and the directions of
engineer-in-charge . (Cost of aluminium snap beading shall be paid
in basic item):With float glass panes of 4.0 mm thickness (weight not
less than 10kg/ m²) including cost of materials, labour, usage charges
of machinery complete as per specifications and as per directions of
the Engineer-in-Charge. SR 2023-24 | Sqm | 1017.64 | 1017.64 | 4.32 | False | None | None | False | None | False | 4396.2048 | 0 |
| 3627813 | 131871 | None | code53 | 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.SR 2023-24 | Sqm | 173.04 | 173.04 | 90.72 | False | None | None | False | None | False | 15698.1888 | 0 |
| 3627814 | 131871 | None | code54 | 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on
New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU
waterproofing membrane that is highly elastic with elongation greater
than 400% and tensile strength greater than 2MPa as per ASTM D412.
The waterproofing membrane to be applied in 2coats @ 1.6kg per m2
to achieve final DFT (dry film thickness) of 1mm including prime coat of
epoxy primer @150 g per m2 and protection with 120gsm Geo-textile
over the waterproofing membrane. The finished cost to include surface
preparation, making coving at Junction, Bore Packing, treatment of
construction joints completely as per specification & with a 10 years
warranty on product & work from certified manufacturers as per the
direction of the Engineer In charge. | Sqm | 841.51 | 841.51 | 349.8 | False | None | None | False | None | False | 294360.198 | 0 |
| 3627815 | 131871 | None | code55 | 9.17 Providing and laying Vitrified tiles in different sizes (thickness to be
specified by manufacturer), with water absorption less than 0.08 % and
conforming to I.S. 15622, of approved make, in all colours & shade,
over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),
jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint
with white cement & matching pigments etc. complete.
9.17.2 Size of Tile 600x600 mm . SR 2023-24 | Sqm | 1210.25 | 1210.25 | 343.5 | False | None | None | False | None | False | 415720.875 | 0 |
| 3627816 | 131871 | None | code56 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin-charge .VOLUME -2 PG NO -163 IT.NO 19.9.2 cement mortar | Sqm | 1734.52 | 1734.52 | 32.4 | False | None | None | False | None | False | 56198.448 | 0 |
| 3627817 | 131871 | None | code57 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge In cement mortar VOLUME -2 PG NO -164 IT.NO 19.10.1 | Sqm | 1031.03 | 1031.03 | 22.4 | False | None | None | False | None | False | 23095.072 | 0 |
| 3627818 | 131871 | None | code58 | Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outlet point wiring using class A Materials Short point upto 3 mts from tapping point to out let via switch | Point | 285.0 | 285.0 | 15.0 | False | None | None | False | None | False | 4275.0 | 0 |
| 3627819 | 131871 | None | code59 | Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outlet point wiring using class A Materials Medium point above 3 mts upto 6mts from tapping point to outlet via switch | Point | 394.0 | 394.0 | 40.0 | False | None | None | False | None | False | 15760.0 | 0 |
| 3627820 | 131871 | None | code60 | Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outlet point wiring using class Long point above 6 mts upto 10 mts from tapping point to outlet via switch | Point | 570.0 | 570.0 | 15.0 | False | None | None | False | None | False | 8550.0 | 0 |
| 3627821 | 131871 | None | code61 | Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outlet point wiring using class Two outlet in a row above 3mts upto 6 mts from tapping point to outlet via switches | Point | 708.0 | 708.0 | 1.0 | False | None | None | False | None | False | 708.0 | 0 |
| 3627822 | 131871 | None | code62 | Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall1 - 3 way | Each | 138.0 | 138.0 | 40.0 | False | None | None | False | None | False | 5520.0 | 0 |
| 3627823 | 131871 | None | code63 | Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall4 - 5 Way | Each | 177.0 | 177.0 | 10.0 | False | None | None | False | None | False | 1770.0 | 0 |
| 3627824 | 131871 | None | code64 | Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall6 Way | Each | 220.0 | 220.0 | 10.0 | False | None | None | False | None | False | 2200.0 | 0 |
| 3627825 | 131871 | None | code65 | Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall8 Way | Each | 261.0 | 261.0 | 10.0 | False | None | None | False | None | False | 2610.0 | 0 |
| 3627826 | 131871 | None | code66 | Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall10-12Way | Each | 319.0 | 319.0 | 10.0 | False | None | None | False | None | False | 3190.0 | 0 |
| 3627827 | 131871 | None | code67 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box1 to 3 module | Each | 161.0 | 161.0 | 35.0 | False | None | None | False | None | False | 5635.0 | 0 |
| 3627828 | 131871 | None | code68 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box4 module | Each | 175.0 | 175.0 | 10.0 | False | None | None | False | None | False | 1750.0 | 0 |
| 3627829 | 131871 | None | code69 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box6 module | Each | 234.0 | 234.0 | 10.0 | False | None | None | False | None | False | 2340.0 | 0 |
| 3627830 | 131871 | None | code70 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box8 module | Each | 284.0 | 284.0 | 10.0 | False | None | None | False | None | False | 2840.0 | 0 |
| 3627831 | 131871 | None | code71 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box10 -12 Module | Each | 344.0 | 344.0 | 10.0 | False | None | None | False | None | False | 3440.0 | 0 |
| 3627832 | 131871 | None | code72 | Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 amps one way switch | Each | 102.0 | 102.0 | 60.0 | False | None | None | False | None | False | 6120.0 | 0 |
| 3627833 | 131871 | None | code73 | Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 amps two way switch | Each | 166.0 | 166.0 | 1.0 | False | None | None | False | None | False | 166.0 | 0 |
| 3627834 | 131871 | None | code74 | Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6 Amps 3 way sockets | Each | 171.0 | 171.0 | 20.0 | False | None | None | False | None | False | 3420.0 | 0 |
| 3627835 | 131871 | None | code75 | Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch platestepped fan Regulator's | Each | 357.0 | 357.0 | 18.0 | False | None | None | False | None | False | 6426.0 | 0 |
| 3627836 | 131871 | None | code76 | Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate16A one way switch | Each | 180.0 | 180.0 | 18.0 | False | None | None | False | None | False | 3240.0 | 0 |
| 3627837 | 131871 | None | code77 | Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate32 A DP switch | Each | 326.0 | 326.0 | 20.0 | False | None | None | False | None | False | 6520.0 | 0 |
| 3627838 | 131871 | None | code78 | Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate6/16 Amps universal sockets | Each | 236.0 | 236.0 | 20.0 | False | None | None | False | None | False | 4720.0 | 0 |
| 3627839 | 131871 | None | code79 | Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plateSupply and fixing one metal Fan box with round hook | Each | 163.0 | 163.0 | 8.0 | False | None | None | False | None | False | 1304.0 | 0 |
| 3627840 | 131871 | None | code80 | Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories complete. | Each | 971.0 | 971.0 | 4.0 | False | None | None | False | None | False | 3884.0 | 0 |
| 3627841 | 131871 | None | code81 | Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2)20 mm dia | Mtr | 66.0 | 66.0 | 500.0 | False | None | None | False | None | False | 33000.0 | 0 |
| 3627842 | 131871 | None | code82 | Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2)25 mm dia | Mtr | 78.0 | 78.0 | 400.0 | False | None | None | False | None | False | 31200.0 | 0 |
| 3627843 | 131871 | None | code83 | Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2)32mm dia 2.5mm thick | Mtr | 103.0 | 103.0 | 40.0 | False | None | None | False | None | False | 4120.0 | 0 |
| 3627844 | 131871 | None | code84 | Groove Cutting in WallSupplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary20 mm dia | Mtr | 68.0 | 68.0 | 250.0 | False | None | None | False | None | False | 17000.0 | 0 |
| 3627845 | 131871 | None | code85 | Groove Cutting in WallSupplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary25 mm dia | Mtr | 79.0 | 79.0 | 150.0 | False | None | None | False | None | False | 11850.0 | 0 |
| 3627846 | 131871 | None | code86 | Groove Cutting in WallSupplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary32mm dia 2.5mm thick | Mtr | 99.0 | 99.0 | 20.0 | False | None | None | False | None | False | 1980.0 | 0 |
| 3627847 | 131871 | None | code87 | WIRING FOR Lighting/Power Circuitsusing one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.1.5 Sq.mm | Mtr | 26.0 | 26.0 | 500.0 | False | None | None | False | None | False | 13000.0 | 0 |
| 3627848 | 131871 | None | code88 | WIRING FOR Lighting/Power Circuitsusing one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.2.5 sq.mm | Mtr | 42.0 | 42.0 | 400.0 | False | None | None | False | None | False | 16800.0 | 0 |
| 3627849 | 131871 | None | code89 | WIRING FOR Lighting/Power Circuitsusing one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.4 sq.mm | Mtr | 63.0 | 63.0 | 300.0 | False | None | None | False | None | False | 18900.0 | 0 |
| 3627850 | 131871 | None | code90 | WIRING FOR Lighting/Power Circuitsusing one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A.6sq.mm | Mtr | 92.0 | 92.0 | 300.0 | False | None | None | False | None | False | 27600.0 | 0 |
| 3627851 | 131871 | None | code91 | Control System MCB DB Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosureI- Single Door12 Way SP & N | Each | 1863.0 | 1863.0 | 2.0 | False | None | None | False | None | False | 3726.0 | 0 |
| 3627852 | 131871 | None | code92 | Control System MCB DB Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosureI- III - Double Door4 Way TPN DB | Each | 4038.0 | 4038.0 | 4.0 | False | None | None | False | None | False | 16152.0 | 0 |
| 3627853 | 131871 | None | code93 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. (54/6.15)5-32Amps SP | Each | 415.0 | 415.0 | 40.0 | False | None | None | False | None | False | 16600.0 | 0 |
| 3627854 | 131871 | None | code94 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. (54/6.15)60-63Amps TPN | Each | 3088.0 | 3088.0 | 4.0 | False | None | None | False | None | False | 12352.0 | 0 |
| 3627855 | 131871 | None | code95 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. (54/6.15)Supplying of on Load change Over Swich,4pole,AC-23A duty,415V,50Hz,AC-supply.63 Amps | Each | 6881.0 | 6881.0 | 2.0 | False | None | None | False | None | False | 13762.0 | 0 |
| 3627856 | 131871 | None | code96 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. (54/6.15)Supplying of on Load change Over Swich,4pole,AC-23A duty,415V,50Hz,AC-supply.125 Amps | Each | 12324.0 | 12324.0 | 2.0 | False | None | None | False | None | False | 24648.0 | 0 |
| 3627857 | 131871 | None | code97 | Fixing of ..... Amps TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labeling.15-63 Amps TPDT/COS | Each | 278.0 | 278.0 | 2.0 | False | None | None | False | None | False | 556.0 | 0 |
| 3627858 | 131871 | None | code98 | Fixing of ..... Amps TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labeling.100-250 Amps TPDT/COS | Each | 447.0 | 447.0 | 2.0 | False | None | None | False | None | False | 894.0 | 0 |
| 3627859 | 131871 | None | code99 | Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. | Sq CM | 0.43 | 0.43 | 2000.0 | False | None | None | False | None | False | 860.0 | 0 |
| 3627860 | 131871 | None | code100 | Supplying and fixing 63A DP MCB miniature circuit breaker on the existing MCB distribution board ( Main / EMGPNL)using necessary fixing materials and wiring complete as required | Each | 1376.0 | 1376.0 | 2.0 | False | None | None | False | None | False | 2752.0 | 0 |
| 3627861 | 131871 | None | code101 | Supplying and fixing 32A DP MCB miniature circuit breaker on the existing MCB distribution board (EMG PNL) using necessary fixing materials and wiring complete as required | Each | 1103.0 | 1103.0 | 16.0 | False | None | None | False | None | False | 17648.0 | 0 |
| 3627862 | 131871 | None | code102 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board. 16-25 Amps 2 pole | Each | 4277.0 | 4277.0 | 4.0 | False | None | None | False | None | False | 17108.0 | 0 |
| 3627863 | 131871 | None | code103 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board.32-40 Amps 4 pole | Each | 5147.0 | 5147.0 | 4.0 | False | None | None | False | None | False | 20588.0 | 0 |
| 3627864 | 131871 | None | code104 | Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4- 20/22 w | Each | 690.0 | 690.0 | 60.0 | False | None | None | False | None | False | 41400.0 | 0 |
| 3627865 | 131871 | None | code105 | Supplying of recess mounting non integral type LED.W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70.efficac 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti
glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gearassembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20%, Life as
per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.2 x 36 Watts | Each | 4553.0 | 4553.0 | 15.0 | False | None | None | False | None | False | 68295.0 | 0 |
| 3627866 | 131871 | None | code106 | Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of 70, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ..W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have inhouse facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source70Watts | Each | 6768.0 | 6768.0 | 10.0 | False | None | None | False | None | False | 67680.0 | 0 |
| 3627867 | 131871 | None | code107 | Supply and fixing of Bulk Head Fitting with 1 No 15 W CFL Lamp. | Each | 952.0 | 952.0 | 20.0 | False | None | None | False | None | False | 19040.0 | 0 |
| 3627868 | 131871 | None | code108 | Supplying of Exhaust Fan of 1440 RPM of 300mm (12") size with Bracket, blades complete for Light duty suitable to operate on 230V,50Hz, A.C.,supply | Each | 2969.0 | 2969.0 | 4.0 | False | None | None | False | None | False | 11876.0 | 0 |
| 3627869 | 131871 | None | code109 | Supplying capacitor type 48" sweep ceiling fan complete with down rod blades , shackle canopies etc suitable for operation on 230V 50 cycles single phase AC supply conforming to ISS - 374 - 1979 and with double ball bearing system [Khaitan, Crompton greaves, Usha] | Each | 2984.0 | 2984.0 | 20.0 | False | None | None | False | None | False | 59680.0 | 0 |
| 3627870 | 131871 | None | code110 | Supplying 300mm wall mounting fan suitable to operate at single phase 230v ac supply | Each | 2492.0 | 2492.0 | 6.0 | False | None | None | False | None | False | 14952.0 | 0 |
| 3627871 | 131871 | None | code111 | Supplying and fixing 32 mm dia class A GI pipe bracket up to 2 mts long bent at suitable angle and fixing to this bracket 70 W MH street light fitting on wall using suitable clamps, bolts and nuts and wiring using suitable capacities of wires completeCABLES | Each | 1045.0 | 1045.0 | 2.0 | False | None | None | False | None | False | 2090.0 | 0 |
| 3627872 | 131871 | None | code112 | Supplying and fixing of 45 mm dia heavy duty cable glands suitable or UG cable of 1.1 KV class metal only | Each | 194.0 | 194.0 | 4.0 | False | None | None | False | None | False | 776.0 | 0 |
| 3627873 | 131871 | None | code113 | Digging of Trench of 0.6M deep x 0.5M wide, refilling the Trench to reqd ground level & consolidating etc in hard soil (Ordinary) | Mtr | 102.0 | 102.0 | 18.0 | False | None | None | False | None | False | 1836.0 | 0 |
| 3627874 | 131871 | None | code114 | Supplying and fixing of 65 mm DIA Class A GI Pipe of wall thickness not less than 3.25mm suitable or UG cable of 1.1 KV class | Mtr | 566.0 | 566.0 | 4.0 | False | None | None | False | None | False | 2264.0 | 0 |
| 3627875 | 131871 | None | code115 | Supplying and fixing of 50Sqmm L.T.cast iron pot heads suitable for 1.1kv class UG cable filled with necessary bitumen/insulting compound complete with terminals ,clamps,bolts,nuts and washers etc. | Each | 618.0 | 618.0 | 2.0 | False | None | None | False | None | False | 1236.0 | 0 |
| 3627876 | 131871 | None | code116 | Supplying , fixing , wiring earth electrode using 40 mm dia 2.9 mm thick GI pipe 2.5 mt long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150 mm alround the pipe to complete depth .The connection from the pipe is to be established through GI wire of size as ISI specifications 7.3.3. of IS732 using 12mm dia bolts nuts washers and check nuts etc;the pipe shall have 16 through holes of 12mm dia | Each | 2999.7 | 2999.7 | 8.0 | False | None | None | False | None | False | 23997.6 | 0 |
| 3627877 | 131871 | None | code117 | Supplying and running of Gi wire of size 8 SWG for grounding connections using necessary fixing materials as required. | Rmtr | 19.0 | 19.0 | 30.0 | False | None | None | False | None | False | 570.0 | 0 |
| 3627878 | 131871 | None | code118 | Supplying and running of GI Strip of size 25 x 3mm for grounding connections using necessary fixing materials as required | Rmtr | 75.0 | 75.0 | 50.0 | False | None | None | False | None | False | 3750.0 | 0 |
| 3627879 | 131871 | None | code119 | Supplying and drawing PVC flexible Two pair telephone unarmoured tinned copper cable of approved make | Rmtr | 13.0 | 13.0 | 100.0 | False | None | None | False | None | False | 1300.0 | 0 |
| 3627880 | 131871 | None | code120 | Supplying and fixing sheet metal box of size 180x90x65 mm made out of 18 SWG sheet metal with necessary holes for cable / conduit entry as required with one coat of primer of approved make | Each | 161.0 | 161.0 | 5.0 | False | None | None | False | None | False | 805.0 | 0 |
| 3627881 | 131871 | None | code121 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall)20 mm Dia (I.No.13.32.1 ,13.32.2 PWD SR 2023-24V2) | Rmtr | 249.26 | 249.26 | 250.0 | False | None | None | False | None | False | 62315.0 | 0 |
| 3627882 | 131871 | None | code122 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall)25 mm Dia (I.No.13.32.1 ,13.32.2 PWD SR 2023-24V2) | Rmtr | 327.54 | 327.54 | 250.0 | False | None | None | False | None | False | 81885.0 | 0 |
| 3627883 | 131871 | None | code123 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall)40 mm Dia (I.No.13.32.1 ,13.32.2 PWD SR 2023-24V2) | Rmtr | 552.08 | 552.08 | 50.0 | False | None | None | False | None | False | 27604.0 | 0 |
| 3627884 | 131871 | None | code124 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore ( I.No.13.2.1 PWD SR 2023-24V2) | No | 294.58 | 294.58 | 8.0 | False | None | None | False | None | False | 2356.64 | 0 |
| 3627885 | 131871 | None | code125 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ( I.No.14.40.2 PWD SR 2023-24V2) | No | 510.88 | 510.88 | 8.0 | False | None | None | False | None | False | 4087.04 | 0 |
| 3627886 | 131871 | None | code126 | Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). For 10cms x 7.5cms ( I.No 12.113.1 PWD SR 2018-19)) | No | 226.6 | 226.6 | 8.0 | False | None | None | False | None | False | 1812.8 | 0 |
| 3627887 | 131871 | None | code127 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with
all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the
required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 110mm dia., 6 kg/sqcm & class 3 ( I.No.1.7 BWSSB SR 2023-24)Sanitary line Rain down pipe | Rmtr | 423.33 | 423.33 | 230.0 | False | None | None | False | None | False | 97365.9 | 0 |
| 3627888 | 131871 | None | code128 | Making Wall bores in Brick masonry upto 45 cm thick width for soil / water pipes including redoing with C.M ( 1:4 ) with all lead and lift as directed by Engineer-in-charge. ( I.No.37.35 PWD SR 2018-19) | No | 129.78 | 129.78 | 15.0 | False | None | None | False | None | False | 1946.7 | 0 |
| 3627889 | 131871 | None | code129 | Providing and fixing PTMT grating of approved quality and colour.100 mm nominal dia ( I.No.13.22.1.1 PWD SR 2023-24V2) | No | 42.23 | 42.23 | 8.0 | False | None | None | False | None | False | 337.84 | 0 |
| 3627890 | 131871 | None | code130 | KSRB 13-11.1 : Providing and placing on terrace, polyethylenewater storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. ( I.No.13.34 PWD SR 2023-24V2) | Ltr | 9.27 | 9.27 | 5000.0 | False | None | None | False | None | False | 46350.0 | 0 |