createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1722337956333 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 13125.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 16-08-2024 16:00:00 tenderQueryClose 14-08-2024 16:00:00 technicalBidOpen None publishedDate 31-07-2024 17:53:20 publishedByPost TP_CO_KDB publishedByUser KPE15281 - LEELAVATHI bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson mahaveera ariga je tp kadaba splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9448253354 tenderSupplierList None
tenderSchedule	createdTs 1722337956366 version 6 createdDate None modifiedDate None tenderNumber DMA/2024-25/BD/WORK_INDENT23784 title CONSTRUCTION OF SECURITY ROOM AND WEIGH BRIDGE CONTROL ROOM FOR SWM SITE IN KADABA TP description CONSTRUCTION OF SECURITY ROOM AND WEIGH BRIDGE CONTROL ROOM FOR SWM SITE IN KADABA TP category WORKS categoryText Works ecv 443324.97 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2370 locationName DMA Town Panchayat Kadaba provisionalAmount 525000.0 groupOverheadTotal None fileNumber KDB/02/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1722337956000 0 None None Buildings CONSTRUCTION OF SECURITY ROOM AND WEIGH BRIDGE CONTROL ROOM FOR SWM SITE IN KADABA TP 443324.97 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3648325 133006 None ITEM01 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 271.04 271.04 10.22 False None None False None False 2770.0288 0 3648326 133006 None ITEM02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 6963.04 6963.04 3.35 False None None False None False 23326.184 0 3648327 133006 None ITEM04 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7155.68 7155.68 8.51 False None None False None False 60894.8368 0 3648328 133006 None ITEM04 Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction Cum 133.28 133.28 9.0 False None None False None False 1199.52 0 3648329 133006 None ITEM05 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Required formwork rates have been included as per P 1155 Vol 1 of PWD SR 2021 - 2022) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Plinth Concrete (plus 50% for shuttering P 115 Vol 1) Cum 10622.64 10622.64 1.08 False None None False None False 11472.4512 0 3648330 133006 None ITEM06 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Required formwork rates have been included as per P 1155 Vol 1 of PWD SR 2021 - 2022) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Roof Slab (Plus 50% for shuttering P 115 Vol 1) Cum 10622.64 10622.64 3.86 False None None False None False 41003.3904 0 3648331 133006 None ITEM07 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (Required formwork rates have been included as per P 1155 Vol 1 of PWD SR 2021 - 2022) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Lintel (Plus 20% for shuttering P 115 Vol 1) Cum 11330.82 11330.82 0.54 False None None False None False 6118.6428 0 3648332 133006 None ITEM08 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings Kg / Cum 100191.84 100191.84 0.55 False None None False None False 55105.512 0 3648333 133006 None ITEM09 Providing and constructing laterite stone masonry including cost and coveyance of all materials curing etc. as per specifications IS 3620/1979 having compressive strength not less than 3.5N /m2 for saturated dry samples- For Super structure in CM 1:6. Cum 7565.6 7565.6 11.55 False None None False None False 87382.68 0 3648334 133006 None ITEM10 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 361.76 361.76 114.56 False None None False None False 41443.2256 0 3648335 133006 None ITEM11 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. Sqm 1282.4 1282.4 20.0 False None None False None False 25648.0 0 3648336 133006 None ITEM12 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 194.88 194.88 43.32 False None None False None False 8442.2016 0 3648337 133006 None ITEM13 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 153.44 153.44 63.22 False None None False None False 9700.4768 0 3648338 133006 None ITEM14 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with both side prelam Sqm 2649.92 2649.92 2.52 False None None False None False 6677.7984 0 3648339 133006 None ITEM15 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications Cum 154642.88 154642.88 0.04 False None None False None False 6185.7152 0 3648340 133006 None ITEM16 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame.The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Sqm 7337.12 7337.12 5.0 False None None False None False 36685.6 0 3648341 133006 None ITEM17 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg / Sqm 126.56 126.56 105.0 False None None False None False 13288.8 0 3648342 133006 None ITEM18 Providing and fixing on wallface unplastisised rigid PVC rain water pipes confirming to IS 13592 Type A including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion single soaked pipes 100 mm dia m 325.92 325.92 7.2 False None None False None False 2346.624 0 3648343 133006 None ITEM19 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. No 134.4 134.4 1.0 False None None False None False 134.4 0 3648344 133006 None ITEM20 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. No 985.6 985.6 1.0 False None None False None False 985.6 0 3648345 133006 None ITEM21 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1178.24 1178.24 1.0 False None None False None False 1178.24 0 3648346 133006 None ITEM22 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No 265.44 265.44 1.0 False None None False None False 265.44 0 3648347 133006 None ITEM23 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 145.6 145.6 1.0 False None None False None False 145.6 0 3648348 133006 None ITEM24 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) No 308.0 308.0 3.0 False None None False None False 924.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1722337958000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1722337958000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1722337958000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1722337958000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1722337958000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1722337958000 0 None None ELIGIBILITY Department Registration Details None 1722337958000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1722337958000 0 None None ELIGIBILITY List of existing commitments and ongoing work None 1722337958000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1722337958000 0 None None ELIGIBILITY Banker Details None 1722337986000 0 None None ELIGIBILITY remaining all other terms and conditions are as per attached tender document None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText PWD registration certificate True Technical Bid Annual Turnover Certificate of previous 3 years True Technical Bid similar workdone True Technical Bid esi and epf certificates True Technical Bid work done certificate 5 lakhs True Technical Bid gst certificate,adhar ,pan cards True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None