| 1722406599000 | 0 | None | None | Buildings | Construction of Anganawadi Center-01 Building Near Kithaganuru Village Circle, Kithaganuru Grama Panchayat, Bangalore East Taluk. Under Deposit Grants | 1594898.63 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3654351 | 133326 | None | Code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 129.39 | 129.39 | 56.56 | False | None | None | False | None | False | 7318.2984 | 0 | | 3654352 | 133326 | None | Code02 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 149.68 | 149.68 | 202.61 | False | None | None | False | None | False | 30326.6648 | 0 | | 3654353 | 133326 | None | Code03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 8104.45 | 8104.45 | 10.53 | False | None | None | False | None | False | 85339.8585 | 0 | | 3654354 | 133326 | None | Code04 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 337.42 | 337.42 | 36.67 | False | None | None | False | None | False | 12373.1914 | 0 | | 3654355 | 133326 | None | Code05 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 7184.78 | 7184.78 | 11.83 | False | None | None | False | None | False | 84995.9474 | 0 | | 3654356 | 133326 | None | Code06 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work.FOOTING | Cum | 8680.2 | 8680.2 | 12.15 | False | None | None | False | None | False | 105464.43 | 0 | | 3654357 | 133326 | None | Code07 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates GROUND FLOOR CENTERING 70% with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work.COLUMNS | Cum | 13663.27 | 13663.27 | 1.02 | False | None | None | False | None | False | 13936.5354 | 0 | | 3654358 | 133326 | None | Code08 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers , well compacted using needle vibrators,providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work.PLINTH | Cum | 12329.82 | 12329.82 | 2.66 | False | None | None | False | None | False | 32797.3212 | 0 | | 3654359 | 133326 | None | Code09 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. COLUMNS | Cum | 14756.58 | 14756.58 | 3.16 | False | None | None | False | None | False | 46630.7928 | 0 | | 3654360 | 133326 | None | Code10 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work.LINTEL AND BEAM | Cum | 13888.55 | 13888.55 | 3.56 | False | None | None | False | None | False | 49443.238 | 0 | | 3654361 | 133326 | None | Code11 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work.ROOF | Cum | 13020.52 | 13020.52 | 6.5 | False | None | None | False | None | False | 84633.38 | 0 | | 3654362 | 133326 | None | Code12 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work.CHEJJA | Cum | 12586.51 | 12586.51 | 0.71 | False | None | None | False | None | False | 8936.4221 | 0 | | 3654363 | 133326 | None | Code13 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Tonne | 113476.21 | 113476.21 | 3.0 | False | None | None | False | None | False | 340428.63 | 0 | | 3654364 | 133326 | None | Code14 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 1561.53 | 1561.53 | 102.67 | False | None | None | False | None | False | 160322.2851 | 0 | | 3654365 | 133326 | None | Code15 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including costof materials, labour, curing complete as per specifications and as perdirections of Engineer-in-charge. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 544.19 | 544.19 | 103.58 | False | None | None | False | None | False | 56367.2002 | 0 | | 3654366 | 133326 | None | Code16 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 353.92 | 353.92 | 163.03 | False | None | None | False | None | False | 57699.5776 | 0 | | 3654367 | 133326 | None | Code17 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 267.66 | 267.66 | 37.82 | False | None | None | False | None | False | 10122.9012 | 0 | | 3654368 | 133326 | None | Code18 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. plete..Size of Tile 600x600 mm. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 1490.49 | 1490.49 | 37.57 | False | None | None | False | None | False | 55997.7093 | 0 | | 3654369 | 133326 | None | Code19 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 1127.7 | 1127.7 | 18.08 | False | None | None | False | None | False | 20388.816 | 0 | | 3654370 | 133326 | None | Code20 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge chineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 112.9 | 112.9 | 103.58 | False | None | None | False | None | False | 11694.182 | 0 | | 3654371 | 133326 | None | Code21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 126.85 | 126.85 | 200.85 | False | None | None | False | None | False | 25477.8225 | 0 | | 3654372 | 133326 | None | Code22 | Distempering with oil bound washable distemper of approved brandnand manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 173.79 | 173.79 | 200.85 | False | None | None | False | None | False | 34905.7215 | 0 | | 3654373 | 133326 | None | Code23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GROUND FLOOR with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 145.88 | 145.88 | 30.38 | False | None | None | False | None | False | 4431.8344 | 0 | | 3654374 | 133326 | None | Code24 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 5680.34 | 5680.34 | 13.5 | False | None | None | False | None | False | 76684.59 | 0 | | 3654375 | 133326 | None | Code25 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Kgs | 213.11 | 213.11 | 151.2 | False | None | None | False | None | False | 32222.232 | 0 | | 3654376 | 133326 | None | Code26 | PVC pipes of 6 Kg/cm2 for 110mm(1.894) with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Mtr | 266.39 | 266.39 | 10.8 | False | None | None | False | None | False | 2877.012 | 0 | | 3654377 | 133326 | None | Code27 | Providing and fixing 12 m thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 948.84 | 948.84 | 3.6 | False | None | None | False | None | False | 3415.824 | 0 | | 3654378 | 133326 | None | Code28 | Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | l | 11.42 | 11.42 | 500.0 | False | None | None | False | None | False | 5710.0 | 0 | | 3654379 | 133326 | None | Code29 | Providing and fixing brass bib cock of approved quality :20 mm nominal bore with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | No | 386.9 | 386.9 | 2.0 | False | None | None | False | None | False | 773.8 | 0 | | 3654380 | 133326 | None | Code30 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges.with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 2014.38 | 2014.38 | 3.15 | False | None | None | False | None | False | 6345.297 | 0 | | 3654381 | 133326 | None | Code31 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Mtr | 403.38 | 403.38 | 11.4 | False | None | None | False | None | False | 4598.532 | 0 | | 3654382 | 133326 | None | Code32 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 25mm nominal OD pipes.with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Mtr | 403.38 | 403.38 | 30.0 | False | None | None | False | None | False | 12101.4 | 0 | | 3654383 | 133326 | None | Code33 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 32mm nominal OD pipes with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Mtr | 507.4 | 507.4 | 27.0 | False | None | None | False | None | False | 13699.8 | 0 | | 3654384 | 133326 | None | Code34 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required 14.1.1White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 6195.35 | 6195.35 | 2.0 | False | None | None | False | None | False | 12390.7 | 0 | | 3654385 | 133326 | None | Code35 | Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings :Flat back wash basin of size 630x450 mm with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 1250.74 | 1250.74 | 2.0 | False | None | None | False | None | False | 2501.48 | 0 | | 3654386 | 133326 | None | Code36 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approvedtype, with all labour with all lead & lift including ncasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will makehis own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3 with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Mtr | 521.36 | 521.36 | 18.0 | False | None | None | False | None | False | 9384.48 | 0 | | 3654387 | 133326 | None | Code37 | Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 @ 6kg/ m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 1484.15 | 1484.15 | 3.24 | False | None | None | False | None | False | 4808.646 | 0 | | 3654388 | 133326 | None | Code38 | Providing and laying of RCC NP3 Class pipe of 1200 mm dia. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Mtr | 11854.14 | 11854.14 | 3.0 | False | None | None | False | None | False | 35562.42 | 0 | | 3654389 | 133326 | None | Code39 | Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using2x1.5Sqmm (Phase& Neut ral) & 1x1.0 sqmm (Earth wire) FRLS multistrand PVC insulat ed copper wire(confirming toIS-694:and latest amendments) with a 6Amps flush type SP control switch sClass Room be fixed on the existing plastic sheet/ gang box, the other end of the wires sClass Room be termi nated with sufficient loose length in a wood/PVC round block.complete for each outlet. Medium point above 3 Mtrs up to 6 Mtrs from tapping point to out let via switch with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Point | 447.22 | 447.22 | 10.0 | False | None | None | False | None | False | 4472.2 | 0 | | 3654390 | 133326 | None | Code40 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary support ing back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal /PVC box 1 to 2 MODULE with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 161.66 | 161.66 | 4.0 | False | None | None | False | None | False | 646.64 | 0 | | 3654391 | 133326 | None | Code41 | Supplying 6A flush/projected type socket and 6 amps flush/projected type SP switch either surface/flush moun ting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessarycapacity wires as required.6 Amps 2 Way with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 151.04 | 151.04 | 10.0 | False | None | None | False | None | False | 1510.4 | 0 | | 3654392 | 133326 | None | Code42 | Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/ Stone/C.C wall. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 376.42 | 376.42 | 4.0 | False | None | None | False | None | False | 1505.68 | 0 | | 3654393 | 133326 | None | Code43 | Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sq CM | 0.48 | 0.48 | 500.0 | False | None | None | False | None | False | 240.0 | 0 | | 3654394 | 133326 | None | Code44 | Supplying heavy gauge PVC conduit pipe con firming to IS 2509 with suitable size bends,junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone struct ure or rawl plugs in case of brick walls and cement plastering damage d portion using heavy gauge saddles at an interval of 700 mm using NF screws. 19/20mm 2 mm Thick with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Mtr | 81.42 | 81.42 | 90.0 | False | None | None | False | None | False | 7327.8 | 0 | | 3654395 | 133326 | None | Code45 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve,indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 489.7 | 489.7 | 1.0 | False | None | None | False | None | False | 489.7 | 0 | | 3654396 | 133326 | None | Code46 | Wiring for lighting / power circute using one of PVC insula ted 1100v/grade multies and copper conductor single core cable in open or consealed system of wiri ng A Group materials 2.50Sqmm materials. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Mtr | 49.56 | 49.56 | 90.0 | False | None | None | False | None | False | 4460.4 | 0 | | 3654397 | 133326 | None | Code47 | Supplying and fixing PVC/metal conduitDeepjunctionbox. 32 mm deep junction bocx. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 71.98 | 71.98 | 4.0 | False | None | None | False | None | False | 287.92 | 0 | | 3654398 | 133326 | None | Code48 | Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burninghours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 814.2 | 814.2 | 9.0 | False | None | None | False | None | False | 7327.8 | 0 | | 3654399 | 133326 | None | Code49 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 3521.12 | 3521.12 | 1.0 | False | None | None | False | None | False | 3521.12 | 0 |
|