createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1722404788390 version 9 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 3320.00 emd 199000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 12-08-2024 17:30:00 tenderQueryClose 07-08-2024 11:00:00 technicalBidOpen 14-08-2024 11:00:00 publishedDate 01-08-2024 17:28:18 publishedByPost KSPHIDCL_EECNT_CNT_BNG publishedByUser KPE13762 - SHIVAPRAKASH G bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 08-08-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson SHIVAPRAKASH G splitEmdRequiredYn True emdBankGuarantee 99000.00 emdCash 100000.00 bgValidityPeriod 120 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08025584130 mobileNumber 7892672609 tenderSupplierList None
tenderSchedule	createdTs 1722404788416 version 13 createdDate None modifiedDate None tenderNumber KSPHIDCL/2024-25/BD/WORK_INDENT121 title Construction of Grade-3 Police Station at Kodigenahalli in Madhugiri Taluk in Tumkur District description Construction of Grade-3 Police Station at Kodigenahalli in Madhugiri Taluk in Tumkur District category WORKS categoryText Works ecv 13262465.53 deptName Karnataka State Police Housing and Infrastructure Development Corporation Limited status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 7550 locationName KSPHIDCL Contracts Section Bengaluru provisionalAmount 15200000.0 groupOverheadTotal 0.0 fileNumber PHC/CNT/BNG(R)/TND/17/2024-25/WI-121
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1722404788000 0 None None Buildings Construction of grade 3 Police Station at kodigenehalli in Madhugiri Taluk in Tumkur District Civil 9673172.91 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3653865 133300 None VOL-I Item No 1.12Page No-8 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 112.1 112.1 134.55 False None None False None False 15083.055 0 3653866 133300 None VOL-I Item No 1.4.2Page No-5 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5m, but not exceeding 3 m Cum 120.36 120.36 282.61 False None None False None False 34014.9396 0 3653867 133300 None VOL-I Item No 1.5.1Page No-6 Earth work excavation for Foundation by manual means for all Buildings,Bridges, Retaining walls, Abutment Piers and such similar works as per drawing and technical Specifications, including setting out, providing shoring & strutting,barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth Cum 270.22 270.22 70.66 False None None False None False 19093.7452 0 3653868 133300 None Vol-II Item No.4.1 Page No.5 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 139.24 139.24 211.82 False None None False None False 29493.8168 0 3653869 133300 None Vol-I Item No2.1.3 Page No. 15 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregate Cum 7067.2 7067.2 54.77 False None None False None False 387070.544 0 3653870 133300 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in Cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for Grade Beam & Columns footings Cum 8074.69 8074.69 73.94 False None None False None False 597042.5786 0 3653871 133300 None VOL-I Item No 1.9 Page No-7 Filling available excavated earth ( excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications No.KSB 2.9 Cum 313.88 313.88 187.8 False None None False None False 58946.664 0 3653872 133300 None VOL-I Item No 1.9 Page No-A60 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work Cum 474.36 474.36 165.47 False None None False None False 78492.3492 0 3653873 133300 None VOL-II Item No. 6.32 Page No. 17 ground floor Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1545.8 1545.8 270.3 False None None False None False 417829.74 0 3653874 133300 None VOL-II Item No. 6.32 Page No. 17 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. For First Floor Sqm 1561.26 1561.26 226.66 False None None False None False 353875.1916 0 3653875 133300 None VOL-II Item No. 6.34 Page No. 17 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1302.72 1302.72 160.46 False None None False None False 209034.4512 0 3653876 133300 None VOL-II Item No. 6.34 Page No. 17 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1315.75 1315.75 35.9 False None None False None False 47235.425 0 3653877 133300 None Vol-I Item No 2.1.4 Page No. 15 Providing and laying in position Cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:3:6 M10 Design Mix Using 20 mm and down size graded crushed coarse aggregates Ground floor Cum 7279.03 7279.03 0.44 False None None False None False 3202.7732 0 3653878 133300 None Vol-I Item No 2.1.4 Page No. 15 Providing and laying in position Cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:3:6 M10 Design Mix Using 20 mm and down size graded crushed coarse aggregates First floor Cum 7137.69 7137.69 0.29 False None None False None False 2069.9301 0 3653879 133300 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Cum 13727.06 13727.06 15.82 False None None False None False 217162.0892 0 3653880 133300 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) for Lintel and cills Concrete Lintel Cum 12919.58 12919.58 4.67 False None None False None False 60334.4386 0 3653881 133300 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) for Lintel and cills Concrete Stair case Cum 11708.37 11708.37 8.27 False None None False None False 96828.2199 0 3653882 133300 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Cum 13864.33 13864.33 5.0 False None None False None False 69321.65 0 3653883 133300 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. FF LINTELS Cum 13048.78 13048.78 2.42 False None None False None False 31578.0476 0 3653884 133300 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) for Roof beam Cum 12919.58 12919.58 14.45 False None None False None False 186687.931 0 3653885 133300 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) for Roof beam FF Cum 13048.78 13048.78 5.84 False None None False None False 76204.8752 0 3653886 133300 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete M25 for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) for roof slab Cum 12112.11 12112.11 34.79 False None None False None False 421380.3069 0 3653887 133300 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) for roof slab FF Cum 12233.24 12233.24 13.53 False None None False None False 165515.7372 0 3653888 133300 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Chajjas Cum 11708.37 11708.37 1.52 False None None False None False 17796.7224 0 3653889 133300 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Chajjas for FF Cum 11825.45 11825.45 1.26 False None None False None False 14900.067 0 3653890 133300 None page-15 item no.4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering (labour charges only) as per specifications. Rmtr 38.94 38.94 71.4 False None None False None False 2780.316 0 3653891 133300 None page-20 item no.4.54 Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm down size with necessary reinforcements at 20cm c/c as per design including formwork, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges) Sqm 8074.74 8074.74 18.96 False None None False None False 153097.0704 0 3653892 133300 None Vol-II Item No. 15.1 P. No. 149 Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single omponent, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2L/per m2,having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 L/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 964.06 964.06 237.0 False None None False None False 228482.22 0 3653893 133300 None page-20 item no.4.54 Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm down size with necessary reinforcements at 20cm c/c as per design including formwork, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges) Ground floor Sqm 8074.74 8074.74 7.43 False None None False None False 59995.3182 0 3653894 133300 None page-20 item no.4.54 Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm down size with necessary reinforcements at 20cm c/c as per design including formwork, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges) FF Sqm 8074.74 8074.74 12.05 False None None False None False 97300.617 0 3653895 133300 None page-20 item no.4.54 Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm down size with necessary reinforcements at 20cm c/c as per design including formwork, centring, curing, Sqm 8074.74 8074.74 3.46 False None None False None False 27938.6004 0 3653896 133300 None Vol-II Item No 8.10 Page No. 43 Providing 6 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per Sqm 248.98 248.98 205.12 False None None False None False 51070.7776 0 3653897 133300 None Vol-II Item No 8.10 Page No. 43 Providing 6mm cement plaster with cement mortor 1:3 (1 cement:3 fine sand) including rounding of corroners where ever required smooth rendering,providing and removing scafolding including cost of materials, curring complete as per specification and as per directions of engineer in charge Sqm 251.34 251.34 73.67 False None None False None False 18516.2178 0 3653898 133300 None Vol-II Item No 8.9 Page No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 454.3 454.3 36.33 False None None False None False 16504.719 0 3653899 133300 None Vol-II Item No 8.9 Page No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge FF Sqm 458.84 458.84 269.79 False None None False None False 123790.4436 0 3653900 133300 None Vol-II Item No 8.9 Page No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 454.3 454.3 220.61 False None None False None False 100223.123 0 3653901 133300 None Vol-II Item No 8.9 Page No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 458.84 458.84 288.53 False None None False None False 132389.1052 0 3653902 133300 None Vol-II Item No 8.5.2 Page No. 42 Providing rough cement plastering 15mm thick in single coat with cement mortar to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.KSRB15-5.1 :do cement mortar 1:4 Sqm 411.82 411.82 85.57 False None None False None False 35239.4374 0 3653903 133300 None Vol-II Item No 8.5.2 Page No. 42 Providing rough cement plastering 15mm thick in single coat with cement mortar to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.KSRB15-5.1 do cement mortar 1:4 Sqm 415.94 415.94 28.67 False None None False None False 11924.9998 0 3653904 133300 None Vol-II Item No 8.9 Page No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 454.3 454.3 64.94 False None None False None False 29502.242 0 3653905 133300 None Vol-II Item No 8.30Page No. 46 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 205.32 205.32 205.12 False None None False None False 42115.2384 0 3653906 133300 None Vol-II Item No 8.30Page No. 46 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 207.37 207.37 73.67 False None None False None False 15276.9479 0 3653907 133300 None Vol-II Item No 8.30 Page No. 46 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 205.61 205.61 220.61 False None None False None False 45359.6221 0 3653908 133300 None Vol-II Item No 8.30 Page No. 46 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 207.37 207.37 288.53 False None None False None False 59832.4661 0 3653909 133300 None Vol-II Item No 8.30Page No. 46 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Ground floor Sqm 205.32 205.32 595.09 False None None False None False 122183.8788 0 3653910 133300 None Vol-II Item No 8.30Page No. 46 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First floor First floor Sqm 207.37 207.37 269.79 False None None False None False 55946.3523 0 3653911 133300 None Vol-II Item No 8.37 Page No. 48 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 220.66 220.66 82.38 False None None False None False 18177.9708 0 3653912 133300 None Vol-II Item No 8.51 Page No. 50 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 118.0 118.0 1143.67 False None None False None False 134953.06 0 3653913 133300 None Vol-II Item No. 12.89 Page No.111 Providing & fixing of 2.5-track x 2-panel sliding windows made out of multi chambered UPVCMatching to RAL-9016) sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI renforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mmThe cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made Sqm 7730.18 7730.18 45.45 False None None False None False 351336.681 0 3653914 133300 None Vol-II Item No. 12.85 Page No. 110 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness.Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. Sqm 6748.42 6748.42 4.5 False None None False None False 30367.89 0 3653915 133300 None VOL-II Item No.11.34 A Page No.86 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 198.24 198.24 1729.92 False None None False None False 342939.3408 0 3653916 133300 None 11.28 volume 2 page 85 Providing and fixing Stainless steel 304 grade for staircase railings, balconies, ramps, with hand rail 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals, and 5 Nos.of 25mm dia. stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., complete including cost of materials, labour, HOM of machineries and electrical charges, etc., Kg 666.7 666.7 258.7 False None None False None False 172475.29 0 3653917 133300 None Vol-II Item No. 12.57.1 Page No. 105 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification. including cost of materials , labour chages for fixing fixtures.Etc with all lead and lift Sqm 5306.46 5306.46 26.44 False None None False None False 140302.8024 0 3653918 133300 None Vol-II Item No. 12.57.1 Page No. 105 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification. including cost of materials , labour chages for fixing fixtures.Etc with all lead and lift Sqm 5306.46 5306.46 9.45 False None None False None False 50146.047 0 3653919 133300 None Vol-II Item No. 12.13.1 Page No. 100 Providing wood frames of doors, windows, clerestory windows, ventilators and other frames wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps but including cost of materials labour HOM complete as per specifications. Specification do Sal wood frame Cum 116601.7 116601.7 0.74 False None None False None False 86285.258 0 3653920 133300 None Vol-II Item No. 12.13.1 Page No. 100 Providing wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps but including cost of materialslabour HOM complete as per specifications. Specification Cum 116601.7 116601.7 0.16 False None None False None False 18656.272 0 3653921 133300 None Vol-II Item No. 12.51 Page No. 104 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1198.88 1198.88 13.0 False None None False None False 15585.44 0 3653922 133300 None Vol-II Item No. 12.51 Page No. 104 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1198.88 1198.88 5.0 False None None False None False 5994.4 0 3653923 133300 None Vol-II Item No 8.55.1 8.37 Page No. 51 & 48 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge. Sqm 220.66 220.66 69.3 False None None False None False 15291.738 0 3653924 133300 None Vol-II Item No 9.22.2 page no 62 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water vabsorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints .Size of Tile 600x600 mm Sqm 1564.68 1564.68 207.37 False None None False None False 324467.6916 0 3653925 133300 None Vol-II Item No 9.22.2 page no 62 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water vabsorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints .Size of Tile 600x600 mm Sqm 1580.33 1580.33 64.13 False None None False None False 101346.5629 0 3653926 133300 None Vol-II Item No 9.11page no 60 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1049.02 1049.02 14.6 False None None False None False 15315.692 0 3653927 133300 None Vol-II Item No 9.11page no 60 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1051.38 1051.38 6.3 False None None False None False 6623.694 0 3653928 133300 None 9.31 VOLUME 2 PAGE 64 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sqm 2826.1 2826.1 54.05 False None None False None False 152750.705 0 3653929 133300 None Volume-II Item no 10.2 page-69 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Rmtr 387.04 387.04 121.18 False None None False None False 46901.5072 0 3653930 133300 None Vol-II Item No 9.39 Page No. 65 Providing skirting, dadooing, rises of steps with colour glazed tiles6mm thick on 10mm thick cement plaster 1:3 and jointed with whitecement slurry over existing rough plaster surface using glazed tiles ofapproved make and size including cost of materials, labour, completeas per specifications. Sqm 1709.82 1709.82 114.24 False None None False None False 195329.8368 0 3653931 133300 None Vol-I Item No 2.11.a Page No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 105559.26 105559.26 14.0 False None None False None False 1477829.64 0 3653932 133300 None Vol-I Item No 2.11.a Page No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. FF Tonne 106614.85 106614.85 2.0 False None None False None False 213229.7 0 3653933 133300 None Vol-II Item No 8.49 Page No. 49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directionsof Engineer-in-charge. cm 4.72 4.72 41000.0 False None None False None False 193520.0 0 3653934 133300 None page 117 Item no.15.34 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120 gm2 width, along route of walls chipped for services junction between RCC and brick walls including cost of materialslabour for fixing complete as per specifications. length of mesh only measured for pay Rmtr 40.12 40.12 600.12 False None None False None False 24076.8144 0 3653935 133300 None Item no 9.96 page no 63 Providing and fixing 65mmx125mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM) U.V- stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement on 6 locations for high screw holding capacity for fixing metalling hold fast and shall be consolidated by filling with medium density foam/Plaster of Paris with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size S shaped M.S. flat hold fast shall be provided with the frame. Rmtr 4770.74 4770.74 41.7 False None None False None False 198939.858 0 3653936 133300 None page-62 item no.9.93 Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized Isopthalic Gelcoat and on layer of 45 gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments. Exclusing cost of fixtures and inclusive of supply of shutters to respective work spot. Sqm 2950.0 2950.0 12.6 False None None False None False 37170.0 0 3653937 133300 None Vol-II Item No 8.9 Page No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 454.3 454.3 580.0 False None None False None False 263494.0 0 1722404788000 0 None None Buildings Construction of grade 3 Police Station at kodigenehalli in Madhugiri Taluk in Tumkur District WATER SUPPLY 571279.49 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3653938 133301 None VOL-I Item No 1.4.2Page No-5 Earth work excavation for foundation of structures by mechanical means as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising / transporting the remaining earth locally upto 1.00km lead. -In all types of soil (P-8, I-2.23.1). Cum 120.36 120.36 61.2 False None None False None False 7366.032 0 3653939 133301 None VOL-I Item No 1.9 Page No-7 Filling available excavated earth ( excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications Cum 313.88 313.88 18.36 False None None False None False 5762.8368 0 3653940 133301 None 13.31.4 Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work).32mm Rmtr 463.74 463.74 125.0 False None None False None False 57967.5 0 3653941 133301 None 13.33.6 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) 50mm pipes confirming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings , this including jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete. (external work) Rmtr 828.36 828.36 60.0 False None None False None False 49701.6 0 3653942 133301 None Vol-VItem No 13.31.3 Page No. Providing and fixing chlorinated poly vinyl chloride ( CPVC ) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all C P V C plain and brass threaded fittings, including fixing the pipe with clamp at 1.00 mtrs spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement , and the cost of cutting chases & making good the same including testing of joints complete (concealed work including cutting chase and good the walls) 25mm Rmtr 623.04 623.04 125.0 False None None False None False 77880.0 0 3653943 133301 None 13.4.1 113 Providing and fixing in position brass gate valve with C.I wheel of approved quality screwed end NB including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification no of 25mmd Nos 623.04 623.04 4.0 False None None False None False 2492.16 0 3653944 133301 None Vol-V Item No 13.6.4.2 Page No. Providing and fixing in position 50 mm nominal bore non-return valve vertical type of approved make including cost of all materials, labour and HOM of equipments with alll leads complete as per specifications. Nos 1438.42 1438.42 2.0 False None None False None False 2876.84 0 3653945 133301 None Vol-V Item No 13.70.3 Providing and fixing to wall, ceiling and floor , medium density polythene pipes 6.00 kgf /sqcm working pressure 50 mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of materials, labour charges, HOM of equipments and testing complete as per specifications. Rmtr 384.68 384.68 52.0 False None None False None False 20003.36 0 3653946 133301 None Vol-V Item No 13.70.5Page No. 49 Providing and fixing to wall, ceiling and floor , medium density polyethylene pipes 6.00 kgf /sqcm working pressure outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of materials, labour charges, HOM of equipments and testing complete as per specifications. Rmtr 531.0 531.0 150.0 False None None False None False 79650.0 0 3653947 133301 None Vol-V Item No 10.1.9 .7Page No. 113 Providing and fixing to wall, ceiling and floor , medium density polyethylene pipes 6.00 kgf /sqcm working pressure outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of materials, labour charges, HOM of equipments and testing complete as per specifications160 mm dia Rmtr 739.86 739.86 50.0 False None None False None False 36993.0 0 3653948 133301 None ol-II Item No. 14.35.1 Page No.127 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo IndianW.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms Nos 7994.5 7994.5 6.0 False None None False None False 47967.0 0 3653949 133301 None pg 90 12.112.2 Providing stone ware gully trap of approved quality and fixing in C C 1:2:4 and plastering with C M 1:3 where ever necessary Size: 15 cm x 10 cm Nos 330.4 330.4 4.0 False None None False None False 1321.6 0 3653950 133301 None pg 269 item no.37.35 Making wall bores in brick masonry walls up to 045 m width for soil water pipe including necessary scaffolding Nos 148.68 148.68 40.0 False None None False None False 5947.2 0 3653951 133301 None pg 269 item no.37.36.2 Making wall bores in stone masonry walls up to 0.45 m width for soil/water pipe including redoing with CM 1:4 and scaffolding. size: 60 cm to 90 cm width Nos 388.22 388.22 10.0 False None None False None False 3882.2 0 3653952 133301 None 13.78, pg. no. 96 Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 1996 with manhole lid and suitable locking arrangements making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials,labour, transport charges, HOM andtesting Nos 8057.04 8057.04 2.0 False None None False None False 16114.08 0 3653953 133301 None 11.50.2, Pg. no. 73 Constructing brick masonry inspection chamber 600 x 600 mm , and 450 mm depth, clear dimension for pipeline with one or two inlets , using table moulded non- modular bricks of class designation 50 in cement mortar 1:5, CI cover with frame light duty 455 610mm total weight of cover with frame to be not less than 39 kgs weight fo cover 23kgs and weight of frame 15kg) RCC top slab with cement concrete M15 with 20mm and downsize granite metal, foundation concrete M5 with 40 mm and downsize granite metal inside plastering 12 mm cement on walls and bed concrete complete as per standard design including cost of materials,labour charges, curing complete as per specifications. Nos 10018.2 10018.2 8.0 False None None False None False 80145.6 0 3653954 133301 None Volum 5 12.111 Pg. no. 90 Providing & Fixing in position C P grating -7.5 cms to 15.00 cms dia grating 100mm dia Nos 177.0 177.0 16.0 False None None False None False 2832.0 0 3653955 133301 None Vol-II Item No. 14.31 Page No.126 Providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Nos 1340.48 1340.48 6.0 False None None False None False 8042.88 0 3653956 133301 None Vol-II Item No. 14.7.1Page No.122 Providing and fixing white vitreous china clay, flat back wash basin with a single 15mm C.P brass pillar tap with C.I M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification Nos 3115.2 3115.2 6.0 False None None False None False 18691.2 0 3653957 133301 None Vol-II Item No. 14.40.2 Page No.128 Providing and fixing CP brass Towel rail 600 mm length, 20 mm dia, with CP brackets, fixed to wooden cleats with CP brass screws including cost of materials, labour complete as per specifications. Nos 448.4 448.4 6.0 False None None False None False 2690.4 0 3653958 133301 None NSR Providing and fixing CP. Health faucet with flexible hose,CP Angle valve, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete Nos 1593.0 1593.0 6.0 False None None False None False 9558.0 0 3653959 133301 None NSR Providing and fixing in position CP bib cock (with face plate) of approved quality 15 mm nominal bore including cost of all materials, labour and HOM of equipments with alll leads complete as per specifications Nos 1475.0 1475.0 6.0 False None None False None False 8850.0 0 3653960 133301 None NSR Providing and fixing in position C P concealed stop cock (with face plate) for shower control arrangements including the cost of all materials, labour and HOM of equipments etc complete as per directions of engineer in charg Nos 1475.0 1475.0 8.0 False None None False None False 11800.0 0 3653961 133301 None NSR Providing and fixing in position CP bib cock (with face plate) of approved quality 15 mm nominal bore including cost of all materials, labour and HOM of equipments with alll leads complete as per specifications Nos 1593.0 1593.0 8.0 False None None False None False 12744.0 0 1722404789000 0 None None Buildings Construction of grade 3 police station at kodegenahalli in Tumkur district SUMP 277620.25 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3653962 133302 None VOL-I Item No 1.4.2Page No-5 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & otherappurtenaces required to complete the work Depth exceeding 1.5m, but not exceeding3 Cum 120.36 120.36 1.82 False None None False None False 219.0552 0 3653963 133302 None VOL-I Item No 1.5.1Page No-6 Earth work excavation for Foundation by manual means for all Buildings,Bridges, Retaining walls, Abutment Piers and such similar works as per drawing and technical Specifications, including setting out, providing shoring & strutting,barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth Cum 270.2 270.2 31.76 False None None False None False 8581.552 0 3653964 133302 None Vol-I Item No2.1.3 Page No. 15 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregate Nos 7067.02 7067.02 1.91 False None None False None False 13498.0082 0 3653965 133302 None Vol-I Item No 2.4.3 Page No. 16 Providing and laying in Cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement & formwork to be paid separately M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates Footing Cum 8074.69 8074.69 3.17 False None None False None False 25596.7673 0 3653966 133302 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) for roof slab Cum 12112.11 12112.11 8.21 False None None False None False 99440.4231 0 3653967 133302 None VOL-I Item No 1.9 Page No-7 Filling available excavated earth ( excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications Cum 313.88 313.88 11.45 False None None False None False 3593.926 0 3653968 133302 None 1.85 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) for roof slab Cum 12112.11 12112.11 1.85 False None None False None False 22407.4035 0 3653969 133302 None Vol-II Item No 8.9 Page No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 454.3 454.3 19.6 False None None False None False 8904.28 0 3653970 133302 None Vol-II Item No 8.1.1Page No. 41 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 300.9 300.9 12.68 False None None False None False 3815.412 0 3653971 133302 None Vol-II Item No 8.9 Page No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 454.3 454.3 15.68 False None None False None False 7123.424 0 3653972 133302 None Vol-I Item No 2.11.a Page No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Kg 105.55 105.55 800.0 False None None False None False 84440.0 0 1722404789000 0 None None Buildings Construction of grade 3 police station at kodegenahalli in Tumkur district BORE WELL 400503.75 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3653973 133303 None CSR 2022 Vol-V, It. No.O040A Pg No.151 Geophysical investigation at site for sinking borewells for supplyingdrinking water to the habitation either through the Hand Pump MWS orP.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geologicalformation. Geophysical investigation of existing ground water in thevicinity, its quality, quantity and acceptability of the users, indicatingthe location of the site, recommended depth of casing pipe required toseal the top unconsolidated formation including an extra depth of 1.0metre in consolidated formation for proper seating of casing pipe, depthof drilling required to cover full depth of aquifer proposed to be tapped,probable yield and other information required including transportationof instruments and accessories to work site, engaging technical personaland labour required etc. NOTE: 1) Additional rate on item 1&2 isallowed for drilling in over burden and fixing Casing pipes beyond 20 M(for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%,b) Above 30 M - 30% (Measurement of overburden is restricted to thedepth of casing pipe fixed excluding initial depth of 20M and projectionabove ground level). 2) A sum of Rs. 100/- is to be deducted for DryBorewell towards yield test. Each 6427.04 6427.04 1.0 False None None False None False 6427.04 0 3653974 133303 None CSR 2022 Vol-V, It. No.O020A Pg No.151 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig ofcapacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing of casing pipes, collars and capwith ncessary cutting, threading and welding including transportation ofrig and supporting vehicles, crew charges, cost of consumables, cost ofyield test at the final depth with a minimum working of compressor forone hour etc. complete. The cost excludes the cost of casing pipes,collars and caps etc.) for: Rmtr 563.95 563.95 50.0 False None None False None False 28197.5 0 3653975 133303 None CSR 2022 Vol-V, It. No.O020B Pg No.151 Above 50 - 100 mts Rmtr 449.7 449.7 50.0 False None None False None False 22485.0 0 3653976 133303 None CSR 2022 Vol-V, It. No.O020C Pg No.151 Above 100 - 150 mts Rmtr 599.19 599.19 50.0 False None None False None False 29959.5 0 3653977 133303 None CSR 2022 Vol-V, It. No.O020D Pg No.151 Above 150 - 200 mts Rmtr 695.21 695.21 50.0 False None None False None False 34760.5 0 3653978 133303 None CSR 2022 Vol-V, It. No.O020E Pg No.151 Above 200 - 250 mts Rmtr 815.33 815.33 50.0 False None None False None False 40766.5 0 3653979 133303 None CSR 2022 Vol-V, It. No.O020F Pg No.151 Above 250 - 300 mts Rmtr 899.4 899.4 50.0 False None None False None False 44970.0 0 3653980 133303 None CSR 2022 Vol-V, It. No.O020G Pg No.151 Above 300 - 350 mts Rmtr 1054.97 1054.97 50.0 False None None False None False 52748.5 0 3653981 133303 None CSR 2022 Vol-V, It. No.O020G Pg No.151 Above 350 - 400 mts Rmtr 1138.83 1138.83 50.0 False None None False None False 56941.5 0 3653982 133303 None CSR 2022 Vol-II, It. No.336 Pg No.A22 M.S. pipe 150 mm dia casing pipe Rmtr 1165.57 1165.57 70.0 False None None False None False 81589.9 0 3653983 133303 None CSR 2022 Vol-V, It. No.1818,D&R Pg No.54 Providing and fixing MS casing collars Each 182.31 182.31 8.0 False None None False None False 1458.48 0 3653984 133303 None CSR 2022 Vol-V, SL. No.1105,5888 Pg No.32 MS casing caps Each 199.33 199.33 1.0 False None None False None False 199.33 0 1722404789000 0 None None Buildings Construction of grade 3 police station at kodegenahalli in Tumkur district ESTIMATES FOR FURNITURES 382722.38 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3653985 133304 None NSR 1 L Shape Table: Providing and fixing L Shape Table, table top made up of 25mm thick ply with post laminated MS powder coated alpha leg under structure with supporing metal modesty inclusive of standard pedestal. The drawers shall be mounted on telescopic slides fitted with brushed finish SS handels withall lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc., complete and as per the directions of the Engineer in-charge of the work, Size 1800x900x750mm ht and 900x600x750mm ht. Nos 36174.08 36174.08 1.0 False None None False None False 36174.08 0 3653986 133304 None NSR 2 Executive chair: Providng & installing revolving type Executive chair with height adj, synchro tilt mechanism with 5 position lock system, mesh back for free air supply with good lumber suport, adj arms, nylon base with unbreakable twin wheel castors model: crown. with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. Nos 26187.74 26187.74 1.0 False None None False None False 26187.74 0 3653987 133304 None NSR 3 Visitor chair: Providng & installing Fixed type Visitor chair with mesh back for free air supply, MS powder coated tubluar under structure, model comfort vistor. with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. Nos 4888.74 4888.74 10.0 False None None False None False 48887.4 0 3653988 133304 None NSR 4 Work station : Providng & installing Table top made up of 25mm thick PLPB with approved laminate color with matching edge banding profile, vertical support to be 75mm thick partitions below table top laminate tiles, above table top one marker/one pin up board for each W/S, Inclusive of standard pedestal with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. 1200x600x1200 Nos 21824.1 21824.1 4.0 False None None False None False 87296.4 0 3653989 133304 None NSR 5 Executive chair: Providng & installing Revoiving type Executive chair with height adj, synchro tilt mechanism with single position lock system, mesh back for free air supply, adj arms, nylon base with unbreakale twin wheel castors model: comfor MBK. with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. Nos 5935.4 5935.4 6.0 False None None False None False 35612.4 0 3653990 133304 None NSR 6 Providng & installing Metal Tandem chair three seater. with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. Nos 7858.8 7858.8 2.0 False None None False None False 15717.6 0 3653991 133304 None NSR 7 Providng installing Free standing table made up of 25 mm thick ply post laminated with approved laminate shade with matching edge banding profile, with supporting gable ends with supporting modesty, table size in mm 1200x900x750ht . with all lead, lifts, loadingunloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer incharge of the work. Nos. 19029.86 19029.86 2.0 False None None False None False 38059.72 0 3653992 133304 None NSR 8 Providng & installing Cot: made up of CRCA of 14G. uniformly bent on sides vertically and further inside and with one lengthwise rib of 14G in the middle underneath. The verticals shall be made out of 38mm square MS tubes of 16G thick on all the four comers & 19mm square MS tubes in between. with approved powder coating color with supporting MS Powder coated tubular legs with mattress, size in mm :1800X750X600ht. with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. Nos. 15052.08 15052.08 4.0 False None None False None False 60208.32 0 3653993 133304 None NSR 9 Providng & installing Plastic chairs for auditorium with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. Nos. 1571.76 1571.76 22.0 False None None False None False 34578.72 0 1722404789000 0 None None Buildings Construction of grade 3 police station at kodegenahalli in Tumkur district ELECTRICAL 1957166.75 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3653994 133305 None 1.2.1 Electrical - Concealed Conduit System Supplying heavy gauge PVC conduit pipe …19/20…mm dia .2.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary,as per the directions of Engineer in charge of the work. 1) 19/20mm dia 2mm thick Mtr 77.88 77.88 500.0 False None None False None False 38940.0 0 3653995 133305 None 1.2.2 Concealed Conduit System - Supplying heavy gauge PVC conduit pipe …25…mm dia .2.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary and as per the directions of Engineer in charge of the work. 2) 25mm dia 2mm thick Mtr 92.04 92.04 400.0 False None None False None False 36816.0 0 3653996 133305 None 1.12 Supplying and Fixing Metal Fan Box with Round Hook. and as per the directions of Engineer in charge of the work. Each 188.8 188.8 24.0 False None None False None False 4531.2 0 3653997 133305 None 1.3.1 Groove cutting Supplying heavy gauge PVC Conduit Pipe 19 20….dia .2.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary ,as per the directions of Engineer in charge of the work. 1) 19/20mm dia 2mm thick Mtr 80.24 80.24 300.0 False None None False None False 24072.0 0 3653998 133305 None 1.3.2 Groove cutting Supplying heavy gauge PVC Conduit Pipe 25.dia .2.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary ,as per the directions of Engineer in charge of the work. 25mm dia 2mm thick Mtr 93.22 93.22 200.0 False None None False None False 18644.0 0 3653999 133305 None 2.3.2 Wiring for lighting/power circuit using one of FRLSH PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments ,as per the directions of Engineer in charge of the work. 1.5 Sqmm Mtr 30.68 30.68 600.0 False None None False None False 18408.0 0 3654000 133305 None 2.3.3 Wiring for lighting/power circuit using one of FRLSH PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system ofwiringwithspecifiedIS694confirming to latest amendments ,as per the directions of Engineer in charge of the work2.5 Sq Mtr 49.56 49.56 1100.0 False None None False None False 54516.0 0 3654001 133305 None 2.3.4 Wiring for lighting/power circuit using one of FRLSH PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:confirming to latest amendments ,as per the directions of Engineer in charge of the work.4 Sqmm Mtr 74.34 74.34 400.0 False None None False None False 29736.0 0 3654002 133305 None 2.2.1 Point wiring using copper wire with out switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm Phase & Neutral & 1x1.0 sqmmEarthwireFRLSH multi strand PVC insulated copper wire confirming to IS694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. as per the directions of Engineer in charge of the work. Short point upto 3Mtr. from tapping point to out let via switch. Point 317.42 317.42 12.0 False None None False None False 3809.04 0 3654003 133305 None 2.2.2 Point wiring using copper wire with out switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm Earth wire FRLSH multi strand PVC insulated copper wire confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. as per the directions of Engineer in charge of the work.Medium point above 3Mtr. Upto 6Mtr. from tapping point to out let via switch Point 447.22 447.22 55.0 False None None False None False 24597.1 0 3654004 133305 None 2.2.3 Point wiring using copper wire with out switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSH multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. as per the directions of Engineer in charge of the ong point above 6Mtr. Upto 10Mtr. from tapping point to out let via switch Point 654.9 654.9 32.0 False None None False None False 20956.8 0 3654005 133305 None Ele SR 14-15 Item No-4.2.2 Supplying and fixing PBBC bakelite straight or slant batten holder and wiring, within 60w230 Volts lamps. No 83.78 83.78 50.0 False None None False None False 4189.0 0 3654006 133305 None SR 1415 Item No4.4 Suppying and fixing cast Aluminium round or ablong type LED 10 watts bulk head fitting suitable for operation of 220 to 240 Volts with burning hours 25 to 50,000 ,as per the directions of Engineer in charge of the work. Each 1123.36 1123.36 2.0 False None None False None False 2246.72 0 3654007 133305 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200mm). and as per the directions of Engineer in charge of the work. Rated air delivery 210 +/- 10% CMM(Cubic Meters per Minute). Each 3521.12 3521.12 24.0 False None None False None False 84506.88 0 3654008 133305 None 13.10 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring ,as per the directions of Engineer in charge of the work. Each 201.78 201.78 24.0 False None None False None False 4842.72 0 3654009 133305 None 6.1 Supplying exhaust fan of 1440 RPM of 300 mm(12') size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply, ,as per directions of engineer incharge of the work. Each 1760.56 1760.56 8.0 False None None False None False 14084.48 0 3654010 133305 None 13.14 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. Ceiling rose wisth sufficient length of 23/0.0076 inch PVC insulated twincore wire ,as per directions of engineer incharge of the work. Each 580.56 580.56 8.0 False None None False None False 4644.48 0 3654011 133305 None 11.32 Supplying of .feet -PVC Batten with integrated LED tube withhi quality diffuser with Life of 25000 burning hours &70lummaintenance with CRI80. Power Input: 220-240V 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against anymanufacturingdefect working under standard electrical condition. LED light fitting 1 x 4' 2022 W11 Each 814.2 814.2 15.0 False None None False None False 12213.0 0 3654012 133305 None 11.3.3 supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70lumenmaintenance withCRI80.PowerInput:220240V5060HzPowerfactor0.9alongwithCEapproved.2yearsWarrantyagainstanymanufacturing defect working under standard electrical condition LED liightfittin No 1497.42 1497.42 25.0 False None None False None False 37435.5 0 3654013 133305 None 13.7.1 Fixing all types and all capacities of LED light fittings indoor on the wall / ceilingrafters / girders using 23/0.00 76” twin twisted PVC insulated wires, required Nos of round blocks , holder with adopter and clamps. Onwall/ceiling/Rafter/Girders ,as per the directions of Engineer in charge of the work. No 143.96 143.96 42.0 False None None False None False 6046.32 0 3654014 133305 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire Set 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3654015 133305 None 12.57 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts ,as per directions of engineer incharge of the work. Each 5022.08 5022.08 2.0 False None None False None False 10044.16 0 3654016 133305 None Ele SR 2019-20 6.3.1 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required ,as per directions of engineer incharge of the work.GI strip 25x3mm Mtr 88.5 88.5 20.0 False None None False None False 1770.0 0 3654017 133305 None 12.58.7 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. copper strip 25x3mm Each 672.6 672.6 25.0 False None None False None False 16815.0 0 3654018 133305 None MR Supplying and fixing Lightining arester spike as per the directions of Engineer in charge of the work. Marc 5900.0 5900.0 1.0 False None None False None False 5900.0 0 3654019 133305 None 12.58.11 Supplying and running of Copper strips for grounding connections, using necessary fixing materials as required. Copper strip f) 600 x 600 x 3mm copper plate as per the directions of Engineer in charge of the work. Each 8756.78 8756.78 2.0 False None None False None False 17513.56 0 3654020 133305 None 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,as per the directions of Engineer in charge of the work. i) 1-3Way Each 187.62 187.62 40.0 False None None False None False 7504.8 0 3654021 133305 None 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in ick/Stone/C.C wall ,as per the directions of Engineer in charge of the work. ii) 4-5Way Each 208.86 208.86 10.0 False None None False None False 2088.6 0 3654022 133305 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in /Stone/C.C wall ,as per the directions of Engineer in charge of the work. ii) 6Way Each 259.6 259.6 10.0 False None None False None False 2596.0 0 3654023 133305 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in wall ,as per the directions of Engineer in charge of the work. iii) 8Way Each 307.98 307.98 45.0 False None None False None False 13859.1 0 3654024 133305 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in ick/Stone/C.C wall ,as per the directio ns of Engineer in charge of the work. iii) 10-12 Way Each 376.42 376.42 5.0 False None None False None False 1882.1 0 3654025 133305 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box ,as per the directions of Engineer in charge of the work. i)1 to 3 Module Each 189.98 189.98 40.0 False None None False None False 7599.2 0 3654026 133305 None 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. and as per the directions of Engineer in charge of the work. ii) 4 Module Each 206.5 206.5 10.0 False None None False None False 2065.0 0 3654027 133305 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. and as per the directions of Engineer in charge of the work. iii) 6 Module Each 276.12 276.12 10.0 False None None False None False 2761.2 0 3654028 133305 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. and as per the directions of Engineer in charge of the work. iv) 8 Module Each 335.12 335.12 45.0 False None None False None False 15080.4 0 3654029 133305 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. and as per the directions of Engineer in charge of the work. iv) 10-12 Module Each 405.92 405.92 5.0 False None None False None False 2029.6 0 3654030 133305 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. i) 6 Amps one way switch Each 120.36 120.36 160.0 False None None False None False 19257.6 0 3654031 133305 None 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. iv) b) 16 Amps one way switch Each 212.4 212.4 25.0 False None None False None False 5310.0 0 3654032 133305 None 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. ii) 6 Amps 3 way socket Each 201.78 201.78 115.0 False None None False None False 23204.7 0 3654033 133305 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. iv) d) 6/16 Amps universal socket Each 278.48 278.48 6.0 False None None False None False 1670.88 0 3654034 133305 None 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. l) RJ45/I.O. outlet Each 397.66 397.66 30.0 False None None False None False 11929.8 0 3654035 133305 None 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. v) Stepped Fan Regulator Each 421.26 421.26 24.0 False None None False None False 10110.24 0 3654036 133305 None 3.6.11 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. and as per the directions of Engineer in charge of the work. vi) TV socket Each 184.08 184.08 2.0 False None None False None False 368.16 0 3654037 133305 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. 32Amps DP switch Each 384.68 384.68 6.0 False None None False None False 2308.08 0 3654038 133305 None NSR Supplying and fixing Cordless calling bell suitable to operte on 230V 50Hz AC/ 3V DC Supply, cordless remote bell push with 2x1.5V DC Batteris and completely wired and as per the directions of Engineer in charge of the work. Each 767.0 767.0 2.0 False None None False None False 1534.0 0 3654039 133305 None Bescom SR 23-24 32.07 Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 a) 3.5 core 25 sqmm Mtr 164.66 164.66 120.0 False None None False None False 19759.2 0 3654040 133305 None Bescom SR 23-24 32.05 Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 a) 4 core 16 sqmm Mtr 167.37 167.37 80.0 False None None False None False 13389.6 0 3654041 133305 None Bescom SR 23-24 21.05 Labour charges for Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff a) 2.5 sqmm to 25 sqmm Mtr 24.64 24.64 120.0 False None None False None False 2956.8 0 3654042 133305 None Bescom SR 23-24 21.06 Labour charges for laying of 1.1 KV class UG cable when supplied agency stoneware pipe / on wall / on pole as required. In exixting trench/duct. 35 sqmm to 95 sqmm as per the directions of Engineer in charge of the work. Mtr 36.73 36.73 80.0 False None None False None False 2938.4 0 3654043 133305 None Ele SR 2019-20 6.10.3 Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts anwashers etc. 1) 25 Sqmm Each 413.0 413.0 2.0 False None None False None False 826.0 0 3654044 133305 None Ele SR 2019-20 6.6.1 Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) as per the directions of Engineer in charge of the work. Mtr 89.68 89.68 75.0 False None None False None False 6726.0 0 3654045 133305 None Ele SR 2019-20 6.9.1 Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. and as per the directions of Engineer in charge of the work. 1) 40 mm Mtr 395.3 395.3 10.0 False None None False None False 3953.0 0 3654046 133305 None Ele SR 2019-20 .7.20.3 Supplying and Laying double walled corrugatted HDPE Pipe in cluding alll accessories Mtr 253.7 253.7 60.0 False None None False None False 15222.0 0 3654047 133305 None 5.42.2 Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with suitable approved colour powder coated paint ,as per directions of engineer incharge of the work. 1) 16 SWG Sq CM 0.5 0.5 40000.0 False None None False None False 20000.0 0 3654048 133305 None 5.41.1 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint ,as per directions of engineer incharge of the work. b) 40x40x6mm Mtr 359.9 359.9 8.0 False None None False None False 2879.2 0 3654049 133305 None 5.40.2 Supplying .250. amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary botls,nuts and washers ,as per directions of engineer incharge of the work. a) 250 Amps 4x30x10mm Aluminium Strips Mtr 4053.3 4053.3 0.5 False None None False None False 2026.65 0 3654050 133305 None 5.11.2 Supplying of on load change over over switches 4 poles, AC 23Amps duty 415V, 50HZ, AC Supply ,as per directions of engineer incharge of the work. 100Amps Each 8366.2 8366.2 1.0 False None None False None False 8366.2 0 3654051 133305 None 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism ,as per directions of engineer incharge of the work.a)100 Amps 25kA Each 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3654052 133305 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C 50Hz 12/24v D.C ,as per the directions of Engineer in charge of the work. Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3654053 133305 None 5.29 Supplying, fixing and wiring 3 phase Digital Ammeter/ Voltmeter ,as per directions of engineer incharge of the work. Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3654054 133305 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.,as per the directions of Engineer in charge of the work. 6-32Amps SP No 489.7 489.7 15.0 False None None False None False 7345.5 0 3654055 133305 None 15.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.,as per the directions of Engineer in charge of the work. 6-32Amps DP Each 872.02 872.02 6.0 False None None False None False 5232.12 0 3654056 133305 None 15.18.7 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.,as per the directions of Engineer in charge of the work. 6-32Amps TPN Each 2026.06 2026.06 3.0 False None None False None False 6078.18 0 3654057 133305 None 15.19.9 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure 1) Double Door 12 Way SP &N and as per the directions of Engineer in charge of the work Each 2748.22 2748.22 4.0 False None None False None False 10992.88 0 3654058 133305 None 15.20.1 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.16-25 Amps 2 pole and as per the directions of Engineer in charge of the work Each 5046.86 5046.86 4.0 False None None False None False 20187.44 0 3654059 133305 None 11.6.3 Supply of LED Streetlight 70w luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Each 7070.56 7070.56 4.0 False None None False None False 28282.24 0 3654060 133305 None 13.1.2 Supplying and Fixing of …….mm dia class A GI pipe bracket up to 2 mtrs long bent at suitable angle and fixing to this bracket 1 x40/2x40 watts fluorescent tube street light fitting of all capacities to GI or CL or rail or RCC pole/wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires Using 32mm dia G.I.Pipe, ,as per directions of engineer incharge of the work. Each 1233.1 1233.1 4.0 False None None False None False 4932.4 0 3654061 133305 None 11.6.3 Supplying of recess mounting non integral type 36watt luminaire comprising of pressure Each 5372.54 5372.54 2.0 False None None False None False 10745.08 0 3654062 133305 None 11.11.7 Supplying & fixing of retrofit type - LED bulb 18 W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI70efficacy 80 lumen per watt, life25000 burning hours and Compliance to IS 1032 No 502.68 502.68 20.0 False None None False None False 10053.6 0 3654063 133305 None 8.1 Supply& Laying of UTP cat-6E LAN cable and as per the directions of Engineer in charge of the work. Mtr 44.84 44.84 1400.0 False None None False None False 62776.0 0 3654064 133305 None 8.2.2 Supplying and drawing PVC flexible one pair telepone unarmoured tinned copper cable. 2 pair and as per the directions of Engineer in charge of the work. Mtr 24.78 24.78 120.0 False None None False None False 2973.6 0 3654065 133305 None 8.4.2 Supplying & Fixing of switch mounting rack with power manager & Cable manage 6U with 450mm depth Each 8232.86 8232.86 2.0 False None None False None False 16465.72 0 3654066 133305 None 8.9.6 Supplying fixing of Network Switches. 16 port Switch and as per the directions of Engineer in charge of the work. Nos 2891.0 2891.0 1.0 False None None False None False 2891.0 0 3654067 133305 None 8.9.2 Supplying fixing of Network Switches. port24 Port Gigabyte (manageable) and as per the directions of Engineer in charge of the work. Nos 48911.0 48911.0 1.0 False None None False None False 48911.0 0 3654068 133305 None 8.12.2 Supplying & Fixing of Patch panel for LAN cabling 24 port 10/100 patch panel and as per the directions of Engineer in charge of the work. Nos 4838.0 4838.0 2.0 False None None False None False 9676.0 0 3654069 133305 None 8.10.2 Supplying & fixing of I/O socket with back box, Double I/o Each 649.0 649.0 25.0 False None None False None False 16225.0 0 3654070 133305 None 15.3 Supply, installation of 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM, Diameter 140MM, Discharge Time less than 13 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8, C and electrically started Fire, A Rating 2A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded,valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with installation system with Superiorquality EPDM Rubber Hosepipe etc., including cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall, , labour, usage charges of machinerycomplete as per specifications. complete IS 15683, CE Approved. and as per the directions of Engineer in charge of the work. Set 3127.0 3127.0 2.0 False None None False None False 6254.0 0 3654071 133305 None CIVIL SR Supplying of 1 HP Open well Mono sub pump set suitable for operation on 230 volts 2880 RPM single phase AC supply And as per the directions of engineer incharge of the work. Set 10782.84 10782.84 1.0 False None None False None False 10782.84 0 3654072 133305 None NSR Supplying of 50 mm kirloskar / other approved make CI screwed foot valve, as per the directions of engineer incharge of the work. Nos 531.0 531.0 1.0 False None None False None False 531.0 0 3654073 133305 None 5.1 Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 230/440 volts 1/3 phase motor upto 5 HP. Each 2273.86 2273.86 1.0 False None None False None False 2273.86 0 3654074 133305 None Civil SR 21-22 pg No 13.6 P130F Providing, supplying to work site, Submersible Pump Set 5 HP 15 stageof 150mm dia suitable for bore well and confirming to IS80342000;3Phase, SS Bowl& Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions o Set 42421.0 42421.0 1.0 False None None False None False 42421.0 0 3654075 133305 None Civil SR 21-22 P360A VLabour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per nstructions of engineer incharge of work Set 7257.0 7257.0 1.0 False None None False None False 7257.0 0 3654076 133305 None Civil SR 18-19 Sl No. 13.37 KSRB 13-6.3-: Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) NB including cost of all materials, labour and HOM of equipments with all leads complete as per specifications ,as per the directions of Engineer in charge of the work Each 2052.02 2052.02 1.0 False None None False None False 2052.02 0 3654077 133305 None Civil SR 18-19 Sl No. 13.62 KSRB13-7.2: Providing and fixing in position 50 mm nominal bore non-return valve vertical type of approved make including cost of all materials, labour and HOM of equipments with alll leads complete as per specifications ,as per the directions of Engineer in charge of the work. Each 1497.42 1497.42 1.0 False None None False None False 1497.42 0 3654078 133305 None Civil SR 21-22 P280A Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL Direct Online Starter 2) S-D- Star Delta Starter for outdoor Upto 6 HP pumps Set 14750.0 14750.0 1.0 False None None False None False 14750.0 0 3654079 133305 None 2.6.2 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100Volts as per IS-694:1990. 3C X 4.0Sq.mm as per the directions of the engineer in charge of the work. Rmtr 198.24 198.24 200.0 False None None False None False 39648.0 0 3654080 133305 None Civil SR 2018-19 Providing and fixing in trenches galvanised/ mildsteel tubes 50mm dia nominal bore with all fittings including cost of all materials and labour charges and HOM of equipments and testing complete asperspecificationand as per the directions of Engineer in charge of the work. Mtr 604.16 604.16 150.0 False None None False None False 90624.0 0 3654081 133305 None 5.7.3 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 63Amps and as per the directions of Engineer in charge of the work. Nos 473.18 473.18 6.0 False None None False None False 2839.08 0 3654082 133305 None Bescom SR 2023-224 1.01 Supplying 9 Mtr RCC Pole 145Kg WL. including earth work etc,. Complete as per the standard technical specification., 9 Mtr 145Kg WL. (Dwg No GM/QS&S/02 Dtd 24.11.2018) as per IS-785 ,as per the directions of Engineer in charge of the work. Each 8349.68 8349.68 1.0 False None None False None False 8349.68 0 3654083 133305 None Bescom SR 2023-24 2.05 Supplying of L.T.4 Pin cross arms, with pole clamps, bolts, nuts and washers (for RCC poles) Set 341.02 341.02 2.0 False None None False None False 682.04 0 3654084 133305 None Bescom SR 2023-24 7.02 Supplying of Rabbit ACSR Conductor with 1.5% sag.and as per the directions of Engineer in charge of the work Km 54556.12 54556.12 0.3 False None None False None False 16366.836 0 3654085 133305 None Bescom SR 18-19 Fixing of guy set with guy wire, guyrod and break insulators etc complete set and as per the directions of Engineer in charge of the work. Nos 206.5 206.5 2.0 False None None False None False 413.0 0 3654086 133305 None Bescom SR 2023-24 2.02 Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth with consoldation etc, complete ,as per the directions of Engineer in charge of the work Nos 1313.34 1313.34 1.0 False None None False None False 1313.34 0 3654087 133305 None Bescom SR 2023-24 5.02 Fixing of 4 Pin cross arm with insulator and Braces fixing and as per the directions of Engineer in charge of the work. Set 188.8 188.8 2.0 False None None False None False 377.6 0 3654088 133305 None Bescom SR 2023-24 7.02 Stringing of No.1 ACSR Rabbit conductor with 1.5% sag and as per the directions of Engineer in charge of the work. Kms 6174.94 6174.94 0.3 False None None False None False 1852.482 0 3654089 133305 None 9.3.3 Supplying, erecting, testing & commissioning of 5 KVA ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories one hour back up complete and Excluding batteries and wiring complete. 5 KVA Set 80691.94 80691.94 2.0 False None None False None False 161383.88 0 3654090 133305 None 9.4.3 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene contain 75 AH CAPACITY Each 20542.62 20542.62 24.0 False None None False None False 493022.88 0 3654091 133305 None 11.7.1 Supply of LED pole mounting type post top lantern LED Post Top Lantern with 15/20 W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light outputRated lifE Burning Hrs 50000 hr@ Lumen Maintenance of 70%, No 8167.96 8167.96 2.0 False None None False None False 16335.92 0 3654092 133305 None 13.6 Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI / GI or any other pipe using required size of reducer, wiring using suitable wires Each 233.64 233.64 2.0 False None None False None False 467.28 0 3654093 133305 None Approved rates Supply of erection testing and commissioning of water level controller and connected accessoriers etc. Nos 11800.0 11800.0 1.0 False None None False None False 11800.0 0 3654094 133305 None 2.5.4 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS694:2010 6C x 1.5 mm2 Mtr 142.78 142.78 50.0 False None None False None False 7139.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1722404791000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1722404791000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1722404791000 2 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of karnataka public procurement portal due to internet connectivity issues and technical glitches at bidder s end. None 1722404791000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1722404791000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1722405451000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contract value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1722405461000 0 None None ELIGIBILITY The tender document is part and parcel of the agreement. None 1722405473000 0 None None ELIGIBILITY The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any None 1722405483000 0 None None ELIGIBILITY The bidder shall study the Tender document Carefully and quote the rates. None 1722405496000 0 None None ELIGIBILITY Drawings uploaded are only for Tender Purpose only None 1722405505000 0 None None ELIGIBILITY The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KSPH & IDCL have the right to deduct the work bills and remit the same to respective PF offices. None 1722405519000 0 None None ELIGIBILITY The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time and if any variation occurs it shall be paid / refunded by / to the Corporation against documentary evidence None 1722405544000 0 None None ELIGIBILITY The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act None 1722405566000 0 None None ELIGIBILITY Remittance towards PF shall be commensurate with the labour component of the work involved. None 1722405587000 0 None None ELIGIBILITY The Bidder shall remit PF of labourers to Bidders permanent PF code number only None 1722405610000 0 None None ELIGIBILITY The bidder should maintain register of labourers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved. None 1722405621000 0 None None ELIGIBILITY The contractor shall obtain insurance coverage for all the workers deployed for this work. None 1722405634000 0 None None ELIGIBILITY Corrigendum/modification/corrections, if any, will be published in the karnataka public procurement portal and www.ksphc.org web sites only. None 1722405663000 0 None None ELIGIBILITY Bounded scanned hard copies are to be submitted duly marking the Page Nos. within 3 days after the last date of submission of the bid documents online to EE(Contracts), KSPH & IDCL, Bangalore. None 1722405774000 1 None None ELIGIBILITY The rates quoted by the Contractor shall be deemed to be inclusive of all applicable taxes, GST, levies, duties and cess, Building Workers Welfare Cess etc., as applicable as per the latest Notifications of GoK and GoI prevailing as on the date of NIT. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law. The Contractor should submit the tax invoice along with RA Bills. None 1722405787000 0 None None ELIGIBILITY Further details of the work or any clarifications can be obtained from the office of the Executive Engineer(Contracts), KSPH & IDCL, Richmond Road, Bangalore 560025. Ph: 080-25584102 Extn - 130 / 114 / 117 None 1722405805000 0 None None ELIGIBILITY The bidder should furnish the documents relating to registration of GST None 1722405841000 0 None None ELIGIBILITY The bidder should furnish the valid address, phone number & e mail ID None 1722405851000 0 None None ELIGIBILITY The intended bidder shall visit the site & quote his offer accordingly and for having visited the site, they should upload the photos while submitting the tender. None 1722406581000 0 None None ELIGIBILITY Tenders must be accompanied by Earnest Money Deposit (EMD) of Rs. 1.99 Lakhs (Rupees One Lakh Ninety Nine Thousand only), which may be paid fully through Karnataka Public Procurement Portal or Out of total EMD amount Rs. 1.00 lakh (Rupees One Lakh only) shall be paid online through Karnataka Public Procurement Portal using any of the following Payment Modes: Credit Card, Direct Debit, National Electronic Fund Transfer (NEFT), Over the Counter (OTC) and the balance amount of Rs. 99,000/- (Rupees Ninety Nine Thousand only) in the form of Bank Guarantee (BG) only issued from Nationalized/Scheduled Commercial Banks in the Name of MD, KSPH&IDCL, Bengaluru. The scan copy of the Bank Guarantee (BG) to be uploaded at the time of submission of bid documents and the original Bank Guarantee should be submitted to Office of the Executive Engineer (Contracts), KSPH & IDCL, No.59, Gen. K.S. Thimmayya Road, Bangalore 560025 On or before the Last date of receipt of tender and the non-compliance of the same leads to the rejection of the bid. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None 1.3 of Section-3 Qualification Information: Work performed as Prime Contractor (in the same name) on works of similar nature over during the five years (2019-20 to 2023-24) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer None None None None 1.4 of Section-3 : Quantities of work executed as prime contractor (in the same name) during the last five years (2019-20 to 2023-24) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer None None None None 1.5 of Section-3 Qualification Information : Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender : (A) Existing commitments and ongoing works & (B) Works for which Tenders already submitted Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer None None None None 1.7 of Section-3: Qualification Information: Reports on the financial standing of the tenderer, such as profit and Loss statements and auditors reports for the last five years. (2019-20 to 2023-24) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Profit & Loss Statement from Registered Chartered Accountant None None None None 3.2- To qualify for award of this contract, each Tender in his/her/their name should have in the last five years i.e. 2019-20 to 2023-24): (b) Satisfactorily completed as prime contractor (at least 90% of the contract value), at least one similar nature of work of value not less than Rs.66.31 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Work Done certificate issued not below the rank of an Executive Engineer or equivalent. None None None None ITT - 3.2 d) The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totalling Rs.8.50 Lakhs in any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Workdone certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded. None None None None 3.2 (e) The Tenderer or his identified subcontractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs.2.42 Lakhs in any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Workdone certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded. None None None None Be a Class-III & above Civil registered contractor of State PWDs / Central/MES/ Govt. Undertakings Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Valid Registration Certificate issued by respective Depts None None None None Be Registered with KSPH & IDCL Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Valid Registration Certificate issued by KSPHCL None None None None Income Tax returns & PAN Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Income Tax returns and PAN certificates None None None None Be Registered with GST Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Valid Registration Certificate issued by Competent Authority None None None None Be Registered with EPF Authorities Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- EPF Registration Certificate None None None None ITT 3.2 - To qualify for award of this contract, each Tenderer / company in his / its name should have in the last five years i.e. 2019-20 to 2023-24 (c) Executed in any one year the minimum quantities of work executed (Please refer Tender Document) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Certificate issued from not below the rank of an Executive Engineer or equivalent. None None None None ITT 3.3 (c)- Each Tenderer should further demonstrate Liquid assets and /or availability of credit facilities of no less than Rs.36.20 Lakhs (Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks for meeting the fund requirement etc (Unconditional) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Letter of Credit Certificates from Nationalized / Scheduled banks for meeting the fund requirement None None None None ITT 3.2 - To qualify for award of this contract, each Tenderer in his/her/their name should have in the last five years i.e. 2019-20 to 2023-24: (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.265.30 Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Attach Certificate from Registered Chartered Accountant with UDIN Number None None None None 1.8 of Section-3 Qualification Information: Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are Proposed to be deployed on this contract, if awarded. Others Others createdTs version createdDate modifiedDate documentName None None None None Others -- Organization Chart & Company Profile
tenderCriterionDocumentList	documentName optional documentTypeText KSPH & IDCL Registration Certificate True Technical Bid Class-III & above Civil registered contractor of State PWDs / Central/MES/Govt. Undertakings True Technical Bid Income Tax returns & PAN True Technical Bid EPF Registration Certificate True Technical Bid Work Done Certificate - ITT 3.2 b Similar nature Work done certificate True Technical Bid Liquid assets and availability of credit facilities True Technical Bid Turnover Certificate - ITT 3.2 a True Technical Bid 1.3.of Section-3 Qualification Information True Technical Bid 1.4.of Section-3 Qualification Information True Technical Bid 1.7.of Section-3 Qualification Information True Technical Bid GST Registration Certificate True Technical Bid Executed minimum quantities of work - ITT 3.2 c True Technical Bid Work Done Certificate - ITT 3.2 d Electrical Work done certificate True Technical Bid Work Done Certificate - ITT 3.2 e Water supply /sanitary Work done certificate True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1722503267000 version 0 createdDate None modifiedDate None blockNumber No. 59, Richmond Road (Gen. K.S.Thimmaiah Road) street None city Bengaluru state Karnataka pin 560025
tenderRecallDTO	None