createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1722411475758 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 403000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 31-08-2024 17:30:00 tenderQueryClose 22-08-2024 11:00:00 technicalBidOpen 02-09-2024 11:00:00 publishedDate 01-08-2024 17:25:04 publishedByPost KSPHIDCL_EECNT_CNT_BNG publishedByUser KPE13762 - SHIVAPRAKASH G bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 19-08-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson SHIVAPRAKASH G splitEmdRequiredYn True emdBankGuarantee 303000.00 emdCash 100000.00 bgValidityPeriod 120 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08025584130 mobileNumber 7892672609 tenderSupplierList None
tenderSchedule	createdTs 1722411475784 version 8 createdDate None modifiedDate None tenderNumber KSPHIDCL/2024-25/BD/WORK_INDENT120 title Construction of 3 Bay Fire Station at Vasanth Narasapura Industrial Area in Tumkur District under K-SAFE-2 Scheme description Construction of 3 Bay Fire Station at Vasanth Narasapura Industrial Area in Tumkur District under K-SAFE-2 Scheme category WORKS categoryText Works ecv 26857335.73 deptName Karnataka State Police Housing and Infrastructure Development Corporation Limited status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 7550 locationName KSPHIDCL Contracts Section Bengaluru provisionalAmount 30000000.0 groupOverheadTotal 0.0 fileNumber PHC/CNT/BNG(R)/TND/20/2024-25/WI-120
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1722411476000 0 None None Buildings CONSTRUCTION OF 3 BAY FIRE STATION AT VASANTH NARSAPURA IN TUMKUR DIST 22115087.68 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3655835 133390 None CSR 2022 Vol-1, It. No.1.12 Pg No.8 Earth work in surface excavation by mechanical means for lowering &leveling the ground for all works other than foundation in all kinds ofsoils & upto depth not exceeding 300mm as per drawing and technicalspecifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavatedearth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 117.71 117.71 360.0 False None None False None False 42375.6 0 3655836 133390 None CSR 2022 Vol-1, It. No.1.14.1 Pg No.8 Earth work excavation for Foundation by mechanical means for allworks & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling theexcavated earth or sorting & stacking the selected earth for reuse in aradius of 50 m and lift upto 1.5 m including cost of labour, tools, usageof machinery & other appurtenaces required to complete the work Cum 126.38 126.38 288.0 False None None False None False 36397.44 0 3655837 133390 None CSR 2022 Vol-2, It. No.4.1 Pg No.5 Providing and injecting chemical emulsion for Pre-constructionalAnti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation,top surface of the plinth filling, junction of wall and floor, along theexternal perimeter of building, expansion joints, over the top surface ofconsolidated earth on which apron is to be laid, surrounding of pipesand conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @3.19 l/m2 including cost of chemical, diluting in water to one percentconcentration, labour, usage charges of machinery, complete as perspecifications. Sqm 146.2 146.2 441.0 False None None False None False 64474.2 0 3655838 133390 None CSR 2022 Vol-1, It. No.2.1.2 Pg No.15 Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formworkshall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 7017.7 7017.7 109.17 False None None False None False 766122.309 0 3655839 133390 None CSR 2022 Vol-II, It. No.5.4 Pg No.9 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 8199.7 8199.7 25.68 False None None False None False 210568.296 0 3655840 133390 None CSR 2022 Vol-I, It. No.2.2.2.1 Pg No.15 For Footing M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) Cum 8478.33 8478.33 209.66 False None None False None False 1777566.6678 0 3655841 133390 None CSR 2022 Vol-I, It. No.2.5.2 Pg No.17 For Columns M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) Cum 14413.41 14413.41 23.26 False None None False None False 335255.9166 0 3655842 133390 None CSR 2022 Vol-I, It. No.2.5.2 Pg No.17 b) First floor Cum 14498.2 14498.2 20.088 False None None False None False 291239.8416 0 3655843 133390 None CSR 2022 Vol-I, It. No.2.5.2 Pg No.17 For Roof Slab M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) Cum 12717.72 12717.72 85.39 False None None False None False 1085966.1108 0 3655844 133390 None CSR 2022 Vol-I, It. No.2.5.2 Pg No.17 b) First floor Cum 12802.5 12802.5 111.7 False None None False None False 1430039.25 0 3655845 133390 None CSR 2022 Vol-I, It. No.2.5.2 Pg No.17 For Roof slab and terrace:Providing and Applying PU based Elastomeric Liquid Applied PUWaterproofing Membrane single component, cold applied, waterbased acrylic PU dispersion with highly elastic and UV resistant waterproofing treatment to the Existing Roof surface/Chajjas/Sunken portionof WC:Bathroom applied @ 1.2L/per m2,having tensile strength greaterthan 1.5N/mm2, elongation greater than 300% with solid content notless than 60% in 2 coats including surface preparation, priming thesurface with water based acrylic primer @0.1 L/m2, and spreading 60gsm geotextile between two top coats completely as per specification.The finished cost to include surface preparation, making coving atJunction, Bore Packing, treatment of construction joints completely asper specification & with a 10 years warranty on product & work fromcertified manufacturers as per the direction of the Engineer In charge. Sqm 913.14 913.14 474.81 False None None False None False 433568.0034 0 3655846 133390 None CSR 2022 Vol-I, It. No.1.9 Pg No.7 KSRB 2.3 : Filling available excavated Earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cm in depth , compacting each deposited layers by ramming after watering with lead upto 50 m & lift upto 1.5 m including cost of all labour complete as per specifications. Cum 329.57 329.57 1766.1 False None None False None False 582053.577 0 3655847 133390 None 7 2.12 as per CSR-2018-19 KSRB 2.5 : Earthwork excavation ( in deposited soil ) and filling sides of foundation upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5 m. including cost of all labour complete as per pecifications. Cum 247.94 247.94 756.9 False None None False None False 187665.786 0 3655848 133390 None CSR 2022 Vol-II, It. No.6.32 Pg No.17 Providing and constructing load bearing wall with Solid Concrete blocksof size 400x200x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1623.09 1623.09 497.57 False None None False None False 807600.8913 0 3655849 133390 None CSR 2022 Vol-II, It. No.6.32 Pg No.17 b) First floor Sqm 1639.32 1639.32 466.13 False None None False None False 764136.2316 0 3655850 133390 None CSR 2022 Vol-II, It. No.6.34 Pg No.17 Providing and constructing load bearing wall with Solid Concrete blocksof size 400x100x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1367.86 1367.86 127.22 False None None False None False 174019.1492 0 3655851 133390 None CSR 2022 Vol-II, It. No.6.34 Pg No.17 b) First floor Sqm 1381.53 1381.53 99.0 False None None False None False 136771.47 0 3655852 133390 None CSR 2022 Vol-I, It. No.2.1.4 Pg No.15 Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregatesProviding and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of ball materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Cum 7420.37 7420.37 3.4 False None None False None False 25229.258 0 3655853 133390 None CSR 2022 Vol-I, It. No.2.1.4 Pg No.15 b) First floor Cum 7494.57 7494.57 6.92 False None None False None False 51862.4244 0 3655854 133390 None CSR 2022 Vol-I, It. No.2.5.2 Pg No.17 KSRB 4.2.10 : Providing & laying in position reinforced cement concrete of mix (M25) with OPC cement @ 24kgs, with12 mm and down size graded granite metal, machine mixed, well compacted for plain chejja of 7.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete as per specifications. Specification no. KBS 4.1, 4.6 Cum 12293.79 12293.79 2.87 False None None False None False 35283.1773 0 3655855 133390 None CSR 2022 Vol-II, It. No.8.16.4 Pg No.44 b) First floor Cum 12378.58 12378.58 1.12 False None None False None False 13864.0096 0 3655856 133390 None CSR 2022 Vol-II, It. No.8.16.4 Pg No.44 Providing 12 mm thick plain cement mortar bands in cement mortar1:4 (1 cement : 4 fine sand): Moulded Band including rounding offcorners wherever required smooth rendering, providing and removingscaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m 9.91 9.91 73.21 False None None False None False 725.5111 0 3655857 133390 None CSR 2022 Vol-II, It. No.8.83 Pg KSRB 4-5 : Providing lath plaster with cement mortar 1:3, 5 cms thick with 6 mm dia mild steel bars at 20 cms c/c both horizontally and vertically fixing chicken mesh for drop chejja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM of machineries, curing complete as per specifications for drop chejja. Sqm 1533.88 1533.88 21.0 False None None False None False 32211.48 0 3655858 133390 None CSR 2022 Vol-I, It. No.2.5.2 Pg No.17 Providing RCC loft(atta) 7.5cms thick with cement concrete M25 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including formwork,centring,curing,finishing the exposed faces with cement mortar (1:3) etc., complete (exclusive of cost of steel and fabrication charges). Sqm 12378.58 12378.58 3.34 False None None False None False 41344.4572 0 3655859 133390 None CSR 2022 Vol-I, It. No.2.5.2 Pg No.17 b) First floor Sqm 12378.58 12378.58 5.2 False None None False None False 64368.616 0 3655860 133390 None CSR 2022 Vol-II, It. No.9.29 Pg No.64 Providing and laying flooring and steps fine dressed granite stone slabs40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed withcement mortar 1:3 over existing cement concrete bed , including costof materials, mortar, labour, curing complete as per specifications Sqm 5335.13 5335.13 59.4 False None None False None False 316906.722 0 3655861 133390 None CSR 2022 Vol-II, It. No.9.29 Pg No.64 Providing and fixing RCC slabs 5 cms thick for wall shelves with 12mm and down size jelly cement concreteM25 including CM 1:3 plaster finishing,curing etc., complete (excluding the cost of steel and fabrication charges) Sqm 12293.79 12293.79 2.16 False None None False None False 26554.5864 0 3655862 133390 None CSR 2022 Vol-I, It. No.2.5.2 Pg No.17 Providing Salwood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled includingmaking plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications Cum 122431.79 122431.79 0.88 False None None False None False 107739.9752 0 3655863 133390 None CSR 2022 Vol-II, It. No.12.13.1 Pg No.100 b) First floor Cum 122431.79 122431.79 0.51 False None None False None False 62440.2129 0 3655864 133390 None CSR 2022 Vol-II, It. No.12.13.1 Pg No.100 Fixing of door frame in an existing opening including embedding frame infloor and walls after cutting masonry for holdfasts for embedding holdfastin cement concrete 1:3:6 of 20mm and down size granite metal paintingtwo coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with leadupto 50 m. including cost of materials, labour charges, complete asper specifications. Nos 1258.82 1258.82 15.0 False None None False None False 18882.3 0 3655865 133390 None CSR 2022 Vol-II, It. No.12.51 Pg No.105 b) First floor Nos 1271.41 1271.41 10.0 False None None False None False 12714.1 0 3655866 133390 None CSR 2022 Vol-II, It. No.12.51 Pg No.105 do 30 mm thick Both side teak Providing and fixing flush door shutter made out of solid core blockboard type, well seasoned , chemicaly treated hard wood battens andinternal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquidphenol formaldehyde resin as per IS specifications 2202 (part-I) 1991.from manufacturer complete as per spcification. Sqm 5752.68 5752.68 13.44 False None None False None False 77316.0192 0 3655867 133390 None CSR 2022 Vol-II, It. No.12.57.1 Pg No.106 b) First floor Sqm 5752.68 5752.68 7.92 False None None False None False 45561.2256 0 3655868 133390 None CSR 2022 Vol-II, It. No.12.57.1 Pg No.106 Flush door shutter (Inside doors) 32mm thick both side teak Sqm 4503.77 4503.77 6.12 False None None False None False 27563.0724 0 3655869 133390 None CSR 2018-19 b) First floor Sqm 4548.81 4548.81 8.28 False None None False None False 37664.1468 0 3655870 133390 None CSR 2018-20 Providing & fixing of 2.5 track x 2-panel sliding windows made outof multi chambered UPVC(Matching to RAL-9016) sections and withminimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo PlasticElastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame.The outer frame having an overall size of 81mm width x 42mmheight withreinforcement of 1mm thickness and Sash with overall size of 31mm x57mm and mesh sash of size with GI reinforcement of 1.5mmthickness.CoextrudedGlazing bead for fixing of glass shall be of size 21.5mm x9.5mm. Windows shall be provided with 5mm plain float glass, standardhardware& single point locking system with touch lock. Wall thickness offrame & sash shall be of 1.8-2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges forminor T&P's shall not be made) Sqm 8116.69 8116.69 21.075 False None None False None False 171059.24175 0 3655871 133390 None CSR 2022 Vol-II, It. No.12.89 Pg No.111 b) First floor Sqm 8116.69 8116.69 28.13 False None None False None False 228322.4897 0 3655872 133390 None CSR 2022 Vol-II, It. No.12.89 Pg No.111 Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(TitaniumDioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead freewith gaskets -grey colour having isolated drainage and reinforced withGalvanized Iron profile through-out the ventilator frame. The frame havingoverall size of 39mm x 39mm with GI reinforcement of 1mm thickness.Louver clip in Aluminium (powder coated in white) will be used on theframe along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7085.84 7085.84 2.16 False None None False None False 15305.4144 0 3655873 133390 None CSR 2022 Vol-II, It. No.12.85 Pg No.110 b) First floor Sqm 7085.84 7085.84 0.72 False None None False None False 5101.8048 0 3655874 133390 None CSR 2022 Vol-II, It. No.12.85 Pg No.110 Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kgs 208.15 208.15 113.4 False None None False None False 23604.21 0 3655875 133390 None CSR 2022 Vol-II, It. No.11.34A Pg No.85 b) First floor Kgs 208.15 208.15 621.0 False None None False None False 129261.15 0 3655876 133390 None CSR 2022 Vol-II, It. No.11.34A Pg No.85 Providing and supplying aluminium extruded tubular and otheraluminium sections as per the architectural drawings and approveddrawings of Chief Architect, GoK.The aluminium quality shall be as pergrade 6063 T5 or T6 as per BS 1474,including super durable powdercoating of 60-80 microns conforming to AAMA 2604 of required colourand shade as approved by the Engineer-in-Charge. ( The item includescost of material such as cleats, sleeves, screws etc. necessary forfabrication of extruded aluminium frame work. Nothing extra shall bepaid on this account).The weight of aluminium extruded section shallbe taken for purpose of payment. Kgs 504.27 504.27 150.5 False None None False None False 75892.635 0 3655877 133390 None CSR 2022 Vol-II, It. No.18.1 Pg No.222 b) Ground floor Sqm 2273.57 2273.57 58.8 False None None False None False 133685.916 0 3655878 133390 None CSR 2022 Vol-II, It. No.18.2 Pg No.222 c) Ground floor Sqm 3346.54 3346.54 58.8 False None None False None False 196776.552 0 3655879 133390 None CSR 2022 Vol-II, It. No.18.3 Pg No.224 KSRB 7.17 : Providing fabricating, assembling and fixing in position, anodised aluminium door, using following aluminium mat finish or glossy finish.Outer frame: plain section: 101.60mm x 44.45mm thickness 3.18mm, section weight 2.404 kg/m, Door Shutter: Vertical section: 44.62 mm x 44.45 mm, thickness 3.18 mm, section weight 1.505 kg/m, Top section: 47.62 mm x 44.45 mm thickness 3.0 mm section weight 1.426 kg/m, Bottom section ; 114.3 mm x 44.45 mm, thickness 3.18 mm, section weight 2.646 kg/m, door central section: 49.91 x 44.45mm thickness 3.00 mm, section weight 1.495 kg/m . Sqm 7596.31 7596.31 5.4 False None None False None False 41020.074 0 3655880 133390 None 39 7.17.1 CSR-2018-19 Providing and fixing of Aluminium composite panel of approved makeand colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level madeout of 50x25x4mm C section or equivalent. The panel should consistof 3mm thick non-halogenated FR grade mineral based polymer ( 2hrs fire resistance as per ASTM E119-12 and clause B, S1, do as perENT 13501-1sandwiched between 0.50 skins thick aluminium sheetmaking a total panel thickness of 4mm. The surfaces will be finishedwith PVDF based coating on topsides and service coating on reversesides would be in polyester paint. The system shall be fixed using GIbrackets, aluminium L cleats and stainless steel bolts and nuts completewith spring washer and cap nuts and all other necessary accessories,sealing shall be done with necessary rods etc., complete Sqm 4942.37 4942.37 28.0 False None None False None False 138386.36 0 3655881 133390 None CSR 2022 Vol-II, It. No.10.15.1 Pg No.71 b) First floor Sqm 4942.37 4942.37 61.0 False None None False None False 301484.57 0 3655882 133390 None CSR 2022 Vol-II, It. No.10.15.1 Pg No.71 For Celing Providing 6 mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including costof materials, labour, curing complete as per specifications and as perdirections of Engineer-in-charge Sqm 264.05 264.05 261.12 False None None False None False 68948.736 0 3655883 133390 None CSR 2022 Vol-II, It. No.8.4.1 Pg No.41 b) First floor Sqm 264.37 264.37 492.37 False None None False None False 130167.8569 0 3655884 133390 None CSR 2022 Vol-II, It. No.8.4.1 Pg No.41 Providing 15 mm cement plaster on the rough side of single or halfbrick wall of mix 1:4 (1 cement: 4 fine sand) including rounding offcorners wherever required smooth rendering, providing and removingscaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 365.51 365.51 765.16 False None None False None False 279673.6316 0 3655885 133390 None CSR 2022 Vol-II, It. No.8.2.1 Pg No.41 b) First floor Sqm 369.16 369.16 844.24 False None None False None False 311659.6384 0 3655886 133390 None CSR 2022 Vol-II, It. No.8.2.1 Pg No.41 Providing 15 mm cement plaster on the rough side of single or halfbrick wall of mix 1:4 (1 cement: 4 fine sand) including rounding offcorners wherever required smooth rendering, providing and removingscaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 365.51 365.51 68.0 False None None False None False 24854.68 0 3655887 133390 None CSR 2022 Vol-II, It. No.8.2.1 Pg No.41 b) First floor Sqm 369.16 369.16 62.0 False None None False None False 22887.92 0 3655888 133390 None CSR 2022 Vol-II, It. No.8.2.1 Pg No.41 External Plastering Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 438.61 438.61 674.7 False None None False None False 295930.167 0 3655889 133390 None CSR 2022 Vol-II, It. No.8.3.1 Pg No.41 b) First floor Sqm 438.61 438.61 847.36 False None None False None False 371660.5696 0 3655890 133390 None CSR 2022 Vol-II, It. No.8.3.1 Pg No.41 for flagging . Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 438.61 438.61 353.4 False None None False None False 155004.774 0 3655891 133390 None CSR 2022 Vol-II, It. No.8.3.1 Pg No.41 Providing and laying flooring for corridors/lobbies using combination of pre polished 19 mm thick water cut/gang saw Grey Granite, Black Granite, and strips of 50mm wide pre flamed grey granite using pre polished grey granite 19mm thick 76%, Pre polished black granite 19mm thick @ 2% and preflamed 19mm thick grey granite @22% over existing cement concrete bed in CM 1:4 average 20mm thick pointed with white cement/colour pigment etc., complete. Sqm 3533.63 3533.63 144.06 False None None False None False 509054.7378 0 3655892 133390 None CSR 2022 Vol-II, It. No.9.24 Pg No.63 b) First floor Sqm 3568.96 3568.96 29.19 False None None False None False 104177.9424 0 3655893 133390 None CSR 2022 Vol-II, It. No.9.24 Pg No.63 Size of Tile 600x600 mm Providing vitrified tiles 60 x 60cms of approved make, shade and size for flooring laid on a bed of 12mm thick cement mortar 1:3 mix, flush pointing with white cemnt using colour pigment, including cost of materials, labour, curing complete as per specification. Sqm 1455.83 1455.83 148.22 False None None False None False 215783.1226 0 3655894 133390 None CSR 2022 Vol-II, It. No.9.17.2 Pg No.61 b) First floor Sqm 1470.38 1470.38 296.0 False None None False None False 435232.48 0 3655895 133390 None CSR 2022 Vol-II, It. No.9.17.2 Pg No.61 Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conformingto IS : 15622, of approved make, in all colours, shades, except White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1101.47 1101.47 28.13 False None None False None False 30984.3511 0 3655896 133390 None CSR 2022 Vol-II, It. No.9.11 Pg No.60 b) First floor Sqm 1112.49 1112.49 18.53 False None None False None False 20614.4397 0 3655897 133390 None CSR 2022 Vol-II, It. No.9.11 Pg No.60 Providing skirting, dadooing, rises of steps with colour glazed tiles6mm thick on 10mm thick cement plaster 1:3 and jointed with whitecement slurry over existing rough plaster surface using glazed tiles ofapproved make and size including cost of materials, labour, completeas per specifications Sqm 1284.84 1284.84 110.08 False None None False None False 141435.1872 0 3655898 133390 None CSR 2022 Vol-II, It. No.9.39 Pg No.65 b) First floor Sqm 1297.69 1297.69 99.56 False None None False None False 129198.0164 0 3655899 133390 None CSR 2022 Vol-II, It. No.9.39 Pg No.65 Providing Thermo-Mechanically Treated bars of grade Fe-500D ormore Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacentmembers whereever necessary complete as per Design including costof material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Tonne 110837.22 110837.22 34.82 False None None False None False 3859352.0004 0 3655900 133390 None CSR 2022 Vol-II, It. No.11.32 Pg No.84 b) First floor Tonne 111945.6 111945.6 17.4 False None None False None False 1947853.44 0 3655901 133390 None CSR 2022 Vol-II, It. No.11.32 Pg No.84 Providing applying two coats of wall putty to inside plastered walls and celiing using white cement putty. Scrapping and leveling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of laour and scaffolding etc., complete as per the specification. GF Sqm 123.9 123.9 1631.16 False None None False None False 202100.724 0 3655902 133390 None 128 15.106 as per CSR-2018-2019 Wall painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade :Two coats on new work afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 157.35 157.35 1630.79 False None None False None False 256604.8065 0 3655903 133390 None CSR 2022 Vol-II, It. No.8.39 Pg No.48 KSRB 15-15.2 : Providing and applying painting in two coats with plastic emulsion paint with primer of approved brand on wall surface to give an even approved shade after throughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. KSRB 15-15.2 : Extra over Item 15-15.1 for painting two coats with plastic emulsion paint of approved brand and shade on ceiling and / or sloping roof as per specifications. For Ceiling Sqm 205.67 205.67 754.0 False None None False None False 155075.18 0 3655904 133390 None 119 15.51.2 & 15.51.3 Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade :Two coats onnew work over an under coat of suitable shade with ordinary paintof approved brand and manufacture after thoroughly brooming thesurface to remove all dirt, dust, mortar drops and foreign matterincluding preparing the surface even and sand paper smooth, cost ofmaterials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 206.91 206.91 129.41 False None None False None False 26776.2231 0 3655905 133390 None CSR 2022 Vol-II, It. No.8.41 Pg No.48 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 m² over and includingpriming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly broomingthe surface to remove all dirt, dust, mortar drops and foreign matterincluding preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directionsof Engineer-in-charge. Sqm 215.59 215.59 757.0 False None None False None False 163201.63 0 3655906 133390 None CSR 2022 Vol-II, It. No.8.30 Pg No.46 b) First floor Sqm 217.74 217.74 849.59 False None None False None False 184989.7266 0 3655907 133390 None 117 15.36 as per CSR-2018-19 KSRB 15.8.3 Providing and fixing plaster mesh 200mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Rmtr 47.08 47.08 836.0 False None None False None False 39358.88 0 3655908 133390 None 15 4.21 as per CSR-2018-19 Providing patti 10 cms wide 10 mm thick alround doors, windows ventilators and for parapet and compound wall etc., with cement mortar (1:3) and finished as per design and specification indlucing scaffolding etc., completed (Old SR) Rmtr 47.08 47.08 204.0 False None None False None False 9604.32 0 3655909 133390 None 181 24.9 as per CSR-2018-19 Painting Kannada and English letters cm 4.96 4.96 12000.0 False None None False None False 59520.0 0 3655910 133390 None Approved Rate Inagural Stone Nos 11800.0 11800.0 2.0 False None None False None False 23600.0 0 3655911 133390 None CSR 2022 Vol-II, It. No.11.28 Pg No.83 Providing and fixing stainless steel 304 grade for staircase railings, balconies, ramps, with hand rail, 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals and 5 Nos of 25mm dia stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., With including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the work., etc., complete as per specifications. (I-7.38) Kgs 700.04 700.04 492.0 False None None False None False 344419.68 0 3655912 133390 None CSR 2022 Vol II IT NO 12.96 PG 112 Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm X 45mm having single rebate of 32mm X 15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be coverd with fibre glass from all sides, M.S.Stay shall be provided at the bottom to steady the frame. Sqm 796.68 796.68 6.12 False None None False None False 4875.6816 0 3655913 133390 None CSR 2022 Vol II IT NO 12.96 PG 112 Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm X 45mm having single rebate of 32mm X 15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be coverd with fibre glass from all sides, M.S.Stay shall be provided at the bottom to steady the frame. Sqm 789.21 789.21 8.28 False None None False None False 6534.6588 0 1722411476000 0 None None Buildings CONSTRUCTION OF 3 BAY FIRE STATION AT VASANTH NARSAPURA IN TUMKUR DIST WATER SUPPLY 663832.02 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3655914 133391 None CSR 2022 Vol-I, It. No.1.6.1 Pg No.6 Earth work excavation for pipelinescables by Manual means upto 600mm trench width, as per drawing and technical specifications, includingsetting out, shoring, strutting, barricading, caution lights, removal ofstumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting& stacking the selected earth for reuse in a radius of 50 m. Fillingavailable excavated earth excluding rock in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. Cum 599.68 599.68 76.0 False None None False None False 45575.68 0 3655915 133391 None CSR 2022 Vol-I, It. No.1.10 Pg No.7 Refilling available earth around trenchespipelines, cables in layersnot exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 198.24 198.24 63.0 False None None False None False 12489.12 0 3655916 133391 None CSR 2022 Vol-II It. No.13.33.3 Providing & fixing CPVC pipe of dia 25 mm m 366.74 366.74 68.0 False None None False None False 24938.32 0 3655917 133391 None CSR 2022 Vol-II It. No.13.33.4 Providing & fixing CPVC pipe of dia 32 mm (external) m 460.91 460.91 70.0 False None None False None False 32263.7 0 3655918 133391 None CSR 2022 Vol-II, It. No.13.33.5 Providing & fixing CPVC pipe of dia 40 mm m 591.0 591.0 65.0 False None None False None False 38415.0 0 3655919 133391 None CSR 2022 Vol-II, It. No.13.33.5 Providing & fixing CPVC pipe of dia 50 mm dia m 893.32 893.32 75.0 False None None False None False 66999.0 0 3655920 133391 None CSR 2022 PG-115, Vol-II It. No.13.3.1 Providing & fixing Brass Bib cocks stop cock of 15mm dia Each 370.46 370.46 15.0 False None None False None False 5556.9 0 3655921 133391 None CSR 2022 PG-115, Vol-II, It. No.13.4.2 Providing & fixing Brass Gate Valve of 32 mm dia Each 740.92 740.92 5.0 False None None False None False 3704.6 0 3655922 133391 None CSR 2022 PG-115, Vol-II, It. No.13.4.3 Providing & fixing Brass Gate Valve of 40 mm dia Each 869.78 869.78 2.0 False None None False None False 1739.56 0 3655923 133391 None CSR 2022 PG-115, Vol-II, It. No.13.4.4 Providing & fixing Brass Gate Valve of 50 mm dia Each 1059.35 1059.35 2.0 False None None False None False 2118.7 0 3655924 133391 None NSR AC Cowl with Cap Nos 37.17 37.17 4.0 False None None False None False 148.68 0 3655925 133391 None CSR 2022 PG-134, Vol-V, It. No.1.5,M010E Providing, laying & jointing PVC pipes75mm dia pipe. m 272.58 272.58 33.0 False None None False None False 8995.14 0 3655926 133391 None CSR 2022 PG-134, Vol-V, It. No.1.7,M010G Providing, laying & jointing PVC pipes110mm dia pipe. m 509.23 509.23 106.0 False None None False None False 53978.38 0 3655927 133391 None CSR 2022 PG-134, Vol-V, It. No.1.9,M010I Providing, laying & jointing PVC pipes (Oriplast) 160mm dia pipe. m 765.7 765.7 50.0 False None None False None False 38285.0 0 3655928 133391 None CSR 2022 Vol-II, It. No.14.1.1 Pg No.123 Providing Orissa pan with flushing cistern Pan 6051.0 6051.0 7.0 False None None False None False 42357.0 0 3655929 133391 None CSR 2022 Vol-II, It. No.14.35.1 Pg No.129 Providing water closet European type with flushing cistern Each 10695.05 10695.05 4.0 False None None False None False 42780.2 0 3655930 133391 None 90 12.112.2 as per CSR-2018-19 Providing stone ware gully trap nahani trap of approved Quality 15cmx10cm Each 428.69 428.69 4.0 False None None False None False 1714.76 0 3655931 133391 None 9012.113.1 as per CSR-2018-19 Providing & fixing CI Nahani trap of approved Qty Each 272.58 272.58 10.0 False None None False None False 2725.8 0 3655932 133391 None CSR 2022 Vol-II, It. No.14.4.1 Pg No.123 Providing urinal basin with flushing system Each 5518.51 5518.51 6.0 False None None False None False 33111.06 0 3655933 133391 None 26937.35 as per CSR-2018-19 Providing Wall bores in BBM Each 130.1 130.1 32.0 False None None False None False 4163.2 0 3655934 133391 None 26937.36.1 as per CSR-2018-19 Providing wall bores in SSM Each 312.23 312.23 15.0 False None None False None False 4683.45 0 3655935 133391 None NSR Making Terrace bore or chajja bore (Old SR 2005-06) Nos 93.67 93.67 8.0 False None None False None False 749.36 0 3655936 133391 None CSR 2022 Vol-II, It. No.13.34 Providing and Placeing and on terrace Polythene Water storage tanks 1500 Ltrs. Nos 11.15 11.15 3000.0 False None None False None False 33450.0 0 3655937 133391 None 76 11.50.3 as per CSR-2018-19 Providing & fixing Inspection Chamber 450x450 mm (interior clear dimensions) Nos 6990.44 6990.44 6.0 False None None False None False 41942.64 0 3655938 133391 None 76 11.50.2 as per CSR-2018-19 Providing & fixing Inspection Chamber 600x600 mm (interior clear dimensions) Nos 7778.44 7778.44 4.0 False None None False None False 31113.76 0 3655939 133391 None 74 11.39 as per CSR-2018-19 Constructing brick masonry circular type manhole 1.22 m internal dia at bottom 1.68 deep & 0.56 dia at top Nos 13091.27 13091.27 2.0 False None None False None False 26182.54 0 3655940 133391 None 9012.111 as per CSR-2018-19 Providing and fixing 7.5 cms to 15 cms dia NP grating Each 154.88 154.88 14.0 False None None False None False 2168.32 0 3655941 133391 None CSR 2022 Vol-II, It. No.14.31 Pg No.128 Providing & fixing 600 x 450 mm bevel led edge mirror Each 1511.58 1511.58 7.0 False None None False None False 10581.06 0 3655942 133391 None 9413.50 as per CSR-2018-19 Providing Nickle Plated (N.P) Metal Showers. Set 875.97 875.97 4.0 False None None False None False 3503.88 0 3655943 133391 None CSR 2022 Vol-II, It. No.14.7APg No.125 Providing China clay Hand wash Basin Unit 5105.92 5105.92 7.0 False None None False None False 35741.44 0 3655944 133391 None CSR 2022 Vol-II, It. No.14.40.2 Pg No.130 Providing and fixing C.P. Brass Towel rail 600 mm length 20 mm dia Each 614.54 614.54 7.0 False None None False None False 4301.78 0 3655945 133391 None VI SI NO 45 White marbles slab 60x150 Sqm 1361.85 1361.85 5.4 False None None False None False 7353.99 0 1722411477000 0 None None Buildings CONSTRUCTION OF 3 BAY FIRE STATION AT VASANTH NARSAPURA IN TUMKUR DIST SUMP 652780.16 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3655946 133392 None CSR 2022 Vol-1, It. No.1.12 Pg No.8 Earth work in surface excavation by mechanical means for lowering &leveling the ground for all works other than foundation in all kinds ofsoils & upto depth not exceeding 300mm as per drawing and technicalspecifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavatedearth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 117.71 117.71 11.0 False None None False None False 1294.81 0 3655947 133392 None CSR 2022 Vol-1, It. No.1.14 Pg No.8 Earth work in surface excavation by mechanical means for lowering &leveling the ground for all works other than foundation in all kinds ofsoils & upto depth not exceeding 300mm as per drawing and technicalspecifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavatedearth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 126.38 126.38 52.6 False None None False None False 6647.588 0 3655948 133392 None CSR 2022 Vol-1, It. No.2.1.2 Pg No.62 Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formworkshall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 7017.7 7017.7 5.46 False None None False None False 38316.642 0 3655949 133392 None CSR 2022 Vol-I, It. No.2.2.2.1 Pg No.15 For Footing M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) Cum 8671.02 8671.02 16.18 False None None False None False 140297.1036 0 3655950 133392 None CSR 2022 Vol-I, It. No.2.2.2.1 Pg No.15 For Footing M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) Cum 8671.02 8671.02 1.817 False None None False None False 15755.24334 0 3655951 133392 None CSR 2022 Vol-I, It. No.2.5.2 Pg No.17 For Columns M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) Cum 13655.14 13655.14 3.98 False None None False None False 54347.4572 0 3655952 133392 None CSR 2022 Vol-I, It. No.2.5.2 Filling available excavated Earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cm Cum 329.57 329.57 72.19 False None None False None False 23791.6583 0 3655953 133392 None CSR 2022 Vol-II, It. No.8.1.1 Pg No.41 Providing 15 mm cement plaster on the rough side of single or halfbrick wall of mix 1:4 (1 cement: 4 fine sand) including rounding offcorners wherever required smooth rendering, providing and removingscaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 365.51 365.51 27.31 False None None False None False 9982.0781 0 3655954 133392 None CSR 2022 Vol-II, It. No.8.3.1 Pg No.41 External Plastering Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 438.61 438.61 175.511 False None None False None False 76980.87971 0 3655955 133392 None CSR 2022 Vol-II, It. No.8.10 Pg No.41 For Celing Providing 6 mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including costof materials, labour, curing complete as per specifications and as perdirections of Engineer-in-charge Sqm 261.43 261.43 22.017 False None None False None False 5755.90431 0 3655956 133392 None CSR 2022 Vol-II, It. No.8.3.1 Pg No.41 External Plastering Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 438.61 438.61 14.1 False None None False None False 6184.401 0 3655957 133392 None CSR 2022 Vol-II, It. No.11.32 Pg No.84 Providing Thermo-Mechanically Treated bars of grade Fe-500D ormore Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacentmembers whereever necessary complete as per Design including costof material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Tonne 110837.22 110837.22 2.02 False None None False None False 223891.1844 0 3655958 133392 None CSR 2022 Vol-V, It. No.13-SOR CODE H140A Pg No.111 Providing & fixing 60x60 cms MS inspection Door Nos 2651.46 2651.46 2.0 False None None False None False 5302.92 0 3655959 133392 None CSR 2022 Vol-V, It. No. Providing Anodized Aluminum ladder using 65 mmx 32mm Rmtr 6318.9 6318.9 7.0 False None None False None False 44232.3 0 1722411477000 0 None None Buildings CONSTRUCTION OF 3 BAY FIRE STATION AT VASANTH NARSAPURA IN TUMKUR DIST BOREWELL 270205.64 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3655960 133393 None CSR 2022 Vol-V, It. No.O040A Pg No.151 Geophysical investigation at site for sinking borewells for supplyingdrinking water to the habitation either through the Hand Pump MWS orP.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geologicalformation. Geophysical investigation of existing ground water in thevicinity, its quality, quantity and acceptability of the users, indicatingthe location of the site, recommended depth of casing pipe required toseal the top unconsolidated formation including an extra depth of 1.0metre in consolidated formation for proper seating of casing pipe, depthof drilling required to cover full depth of aquifer proposed to be tapped,probable yield and other information required including transportationof instruments and accessories to work site, engaging technical personaland labour required etc. NOTE: 1) Additional rate on item 1&2 isallowed for drilling in over burden and fixing Casing pipes beyond 20 M(for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%,b) Above 30 M - 30% (Measurement of overburden is restricted to thedepth of casing pipe fixed excluding initial depth of 20M and projectionabove ground level). 2) A sum of Rs. 100/- is to be deducted for DryBorewell towards yield test. Each 6427.04 6427.04 1.0 False None None False None False 6427.04 0 3655961 133393 None CSR 2022 Vol-V, It. No.O020A Pg No.151 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig ofcapacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing of casing pipes, collars and capwith ncessary cutting, threading and welding including transportation ofrig and supporting vehicles, crew charges, cost of consumables, cost ofyield test at the final depth with a minimum working of compressor forone hour etc. complete. The cost excludes the cost of casing pipes,collars and caps etc.) for: Rmtr 458.43 458.43 50.0 False None None False None False 22921.5 0 3655962 133393 None CSR 2022 Vol-V, It. No.O020B Pg No.151 Above 50 -100mts Rmtr 574.9 574.9 50.0 False None None False None False 28745.0 0 3655963 133393 None CSR 2022 Vol-V, It. No.O020D Pg No.151 Above 100 - 150 mts Rmtr 610.83 610.83 50.0 False None None False None False 30541.5 0 3655964 133393 None CSR 2022 Vol-V, It. No.O020E Pg No.151 Above 150 - 200 mts Rmtr 708.71 708.71 50.0 False None None False None False 35435.5 0 3655965 133393 None CSR 2022 Vol-V, It. No.O020F Pg No.151 Above 250 - 300mts Rmtr 916.86 916.86 50.0 False None None False None False 45843.0 0 3655966 133393 None CSR 2022 Vol-II, It. No.336 Pg No.A22 M.S. pipe 160 mm dia casing pipe Rmtr 1188.2 1188.2 48.0 False None None False None False 57033.6 0 3655967 133393 None CSR 2022 Vol-V, It. No.1818,D&R Pg No.54 Providing and fixing MS casing collars Each 185.85 185.85 8.0 False None None False None False 1486.8 0 3655968 133393 None CSR 2022 Vol-V, SL. No.1105,5888 Pg No.32 MS casing caps Each 203.2 203.2 1.0 False None None False None False 203.2 0 3655969 133393 None CSR 2022 Vol-V, It. No.O020F Pg No.151 Above200-250 Rmtr 831.37 831.37 50.0 False None None False None False 41568.5 0 1722411477000 0 None None Buildings CONSTRUCTION OF 3 BAY FIRE STATION AT VASANTH NARSAPURA IN TUMKUR DIST Soak and septic 393707.28 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3655970 133394 None CSR 2022 Vol-1, It. No.1.14.1 Pg No.8 Earth work excavation for foundation of structures upto 3 mtrs.by mechanical means as per drawing and technical specification,including setting out, providing shoring, strutting and bracing, removalof stumps and other deleterious matter, dressing of sides and bottom,filling back the excavated earth to the extent required and utilising /transporting the remaining earth upto 1.00km lead. including cost oflabour, materials and HOM etc., complete. Cum 117.71 117.71 70.96 False None None False None False 8352.7016 0 3655971 133394 None CSR 2022 Vol-1, It. No.2.1.2 Pg No.15 Providing & laying cement concrete of mix 1:4:8 with OPC cement @ 180kgs Cum 7017.7 7017.7 2.87 False None None False None False 20140.799 0 3655972 133394 None CSR 2022 Vol-I, It. No.2.5.2 Pg No.17 KSRB 4.2.8: Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @320 Kgs with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcements as per specifications. Specification No. KBS 4.1, 4.6 for walls and Roof slab. Cum 8478.33 8478.33 14.05 False None None False None False 119120.5365 0 3655973 133394 None CSR 2022 Vol-I, It. No.2.4.1 Pg No.17 Providing & laying cement concrete of mix 1:2:4 with cement @ 240kgs for CC 1:2:4 for Septick tank Cum 7193.28 7193.28 1.1 False None None False None False 7912.608 0 3655974 133394 None CSR 2022 Vol-II, It. No.8.3.1 Pg No.41 Providing 20mm thick cement plaster with cement mortar 1:4 for Septick tank in side Plaster with WPC Sqm 438.61 438.61 94.08 False None None False None False 41264.4288 0 3655975 133394 None CSR 2022 Vol-II, It. No.8.4.1 Pg No.41 Providing 12mm thick cement plaster with cement mortar 1:4 for Septick tank in Ceiling Plaster with WPC Sqm 264.04 264.04 12.29 False None None False None False 3245.0516 0 3655976 133394 None CSR 2022 Vol-II, It. No.11.32 Pg No.84 Providing T.M.T steel bars Fe 500 reinforcement for R.C.C work Tonne 110837.22 110837.22 1.12 False None None False None False 124137.6864 0 3655977 133394 None 25 5.1 as per CSR-2018-19 KSRB 5-1.1: Providing and constructing granite trap basalt rubble stone masonery in foundation with mud mortar (uncoursed), bond stones at 2m. Apart in each course including cost of materials, labour, curing complete as per specification. KBS 5.1.12 Cum 8199.7 8199.7 8.48 False None None False None False 69533.456 0 1722411477000 0 None None Buildings CONSTRUCTION OF 3 BAY FIRE STATION AT VASANTH NARSAPURA IN TUMKUR DIST Electrical 2761722.95 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3655978 133395 None 1.2.1 Conceled Conduit System : Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick Mtr 77.88 77.88 350.0 False None None False None False 27258.0 0 3655979 133395 None 1.2.2 Conceled Conduit System : Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick Mtr 92.04 92.04 350.0 False None None False None False 32214.0 0 3655980 133395 None 1.3.1 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19/20mm dia 2mm thick Mtr 80.24 80.24 120.0 False None None False None False 9628.8 0 3655981 133395 None 1.3.2 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25mm dia 2mm thick Mtr 93.22 93.22 150.0 False None None False None False 13983.0 0 3655982 133395 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 Sqmm Mtr 30.68 30.68 650.0 False None None False None False 19942.0 0 3655983 133395 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 Sqmm Mtr 49.56 49.56 1050.0 False None None False None False 52038.0 0 3655984 133395 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 Sqmm Mtr 74.34 74.34 350.0 False None None False None False 26019.0 0 3655985 133395 None 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 Sqmm Mtr 108.56 108.56 100.0 False None None False None False 10856.0 0 3655986 133395 None 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point up to 3Mtr from tapping point to out let via switch Point 317.42 317.42 5.0 False None None False None False 1587.1 0 3655987 133395 None 2.2.2 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Medium point above 3mtr up to 6Mtr from tapping point to out let via switch Point 447.22 447.22 40.0 False None None False None False 17888.8 0 3655988 133395 None 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Above 6Mtr up to 10Mtr from tapping Point to out let via switch Point 654.9 654.9 50.0 False None None False None False 32745.0 0 3655989 133395 None Ele 14-15 4.2 Supplying and fixing PBBC bakelite straight or slant batten holder and wiring, within 60w/230 Volts lamps. Make Group "A" materials and as per the directions of Engineer in charge of the work. Each 103.84 103.84 50.0 False None None False None False 5192.0 0 3655990 133395 None 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3 way No 187.62 187.62 25.0 False None None False None False 4690.5 0 3655991 133395 None 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 way No 208.86 208.86 20.0 False None None False None False 4177.2 0 3655992 133395 None 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 way No 259.6 259.6 20.0 False None None False None False 5192.0 0 3655993 133395 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 way Each 307.98 307.98 6.0 False None None False None False 1847.88 0 3655994 133395 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 way Each 376.98 376.98 12.0 False None None False None False 4523.76 0 3655995 133395 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. iv) 1-3 Module Each 189.98 189.98 25.0 False None None False None False 4749.5 0 3655996 133395 None 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. iv) 4 Module Each 206.5 206.5 20.0 False None None False None False 4130.0 0 3655997 133395 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. iv) 6 Module Each 276.12 276.12 20.0 False None None False None False 5522.4 0 3655998 133395 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. iv) 8 Module Each 335.12 335.12 6.0 False None None False None False 2010.72 0 3655999 133395 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. v) 10 - 12 Module Each 405.92 405.92 12.0 False None None False None False 4871.04 0 3656000 133395 None 3.6.1 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Make - Group "A" materials and as per the directions of Engineer in charge of the work. i) 6 Amps one way Each 120.36 120.36 130.0 False None None False None False 15646.8 0 3656001 133395 None 3.6.7 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Make - Group "A" materials and as per the directions of Engineer in charge of the work. iv) b) 16 Amps one way switch Each 212.4 212.4 8.0 False None None False None False 1699.2 0 3656002 133395 None 3.6.3 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Make - Group "A" materials and as per the directions of Engineer in charge of the work. ii) 6 Amps 3 way socket Each 201.78 201.78 40.0 False None None False None False 8071.2 0 3656003 133395 None 3.6.11 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. as per the directions of Engineer in charge of the work. ii) 16 Amp Universal socket Each 278.48 278.48 4.0 False None None False None False 1113.92 0 3656004 133395 None 3.6.4 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. as per the directions of Engineer in charge of the work. ii) Stepped fan regulator two module Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3656005 133395 None 3.6.13 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per the directions of Engineer in charge of the work. l) RJ45/I.O. outlet Each 397.66 397.66 12.0 False None None False None False 4771.92 0 3656006 133395 None Approved rates Alur fire station Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Make - Group "A" materials and as per the directions of Engineer in charge of the work. l) RJ 11 Each 295.0 295.0 2.0 False None None False None False 590.0 0 3656007 133395 None 11.3.3 Supplying of feet Aluminium Batten with integrated LED tube . with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance 28 W Each 1497.42 1497.42 25.0 False None None False None False 37435.5 0 3656008 133395 None 11.3.2 Supplying of feet Aluminium Batten with integrated LED tube with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance 20w Each 814.2 814.2 15.0 False None None False None False 12213.0 0 3656009 133395 None 11.6.3 Supplying of recess mounting non integral type 2'x2' 36W luminaire comprising of pressure decast extruded aluminium housing, with spring loaded false ceiling clamps, Each 5372.54 5372.54 9.0 False None None False None False 48352.86 0 3656010 133395 None 13.7.1 Fixing all types and all capacities fluorescent/false ceiling/spot light/CFL fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required nos of round blocks and clamps (if required).a) On wall/ceiling/Rafter/Girders Each 143.96 143.96 49.0 False None None False None False 7054.04 0 3656011 133395 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 48" Sweep (1200 mm) Regular model. Each 3521.12 3521.12 13.0 False None None False None False 45774.56 0 3656012 133395 None 6.5.1 Supplying wall mounting fan suitable to operate at single-phase 230 V A.C. supply, 300mm Sweep Each 2940.56 2940.56 2.0 False None None False None False 5881.12 0 3656013 133395 None 13.10 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 201.78 201.78 15.0 False None None False None False 3026.7 0 3656014 133395 None 6.1 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 1760.56 1760.56 4.0 False None None False None False 7042.24 0 3656015 133395 None 13.14 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 580.56 580.56 4.0 False None None False None False 2322.24 0 3656016 133395 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia Each 4141.8 4141.8 4.0 False None None False None False 16567.2 0 3656017 133395 None 12.57 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts Each 5022.08 5022.08 6.0 False None None False None False 30132.48 0 3656018 133395 None 12.58.2 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required GI strip 25X3mm Mtr 96.76 96.76 50.0 False None None False None False 4838.0 0 3656019 133395 None 12.58.7 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip Mtr 672.6 672.6 10.0 False None None False None False 6726.0 0 3656020 133395 None 12.58.11 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate No 8756.78 8756.78 6.0 False None None False None False 52540.68 0 3656021 133395 None Ele SR 19-20 6.18.3 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG GI Wire Mtr 22.42 22.42 50.0 False None None False None False 1121.0 0 3656022 133395 None 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. Sqmm 0.51 0.51 110000.0 False None None False None False 56100.0 0 3656023 133395 None 5.41.1 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40x40x6mm Mtr 359.9 359.9 8.0 False None None False None False 2879.2 0 3656024 133395 None 5.40.2 Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary botls,nuts and washers. 250Amps 4x30x10mm Alluminium Strips Mtr 4053.3 4053.3 1.5 False None None False None False 6079.95 0 3656025 133395 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C 50Hz 12/24v D.C. Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3656026 133395 None 5.29 Supplying, fixing and wiring 3 phase Digital Ammeter/ Voltmeter Each 1681.9 1681.9 2.0 False None None False None False 3363.8 0 3656027 133395 None 5.21 Supplying, fixing and wiring Earth Leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/flush mounting on panel board. Each 10920.9 10920.9 1.0 False None None False None False 10920.9 0 3656028 133395 None 5.20.8 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 32-40 Amps 4 pole Each 6073.46 6073.46 2.0 False None None False None False 12146.92 0 3656029 133395 None 5.14.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Circuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 160Amps 25kA Each 15867.46 15867.46 1.0 False None None False None False 15867.46 0 3656030 133395 None 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Circuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 100aMPS 25kA. Each 10014.66 10014.66 4.0 False None None False None False 40058.64 0 3656031 133395 None 5.11.3 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 125 Amps Each 12184.68 12184.68 2.0 False None None False None False 24369.36 0 3656032 133395 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps SP Each 489.7 489.7 10.0 False None None False None False 4897.0 0 3656033 133395 None 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps DP Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3656034 133395 None 5.18.7 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 3) 5-32Amps TPN Each 2026.06 2026.06 3.0 False None None False None False 6078.18 0 3656035 133395 None 5.19.11 Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure 1) Double Door 4 Way TP &N Each 4764.84 4764.84 3.0 False None None False None False 14294.52 0 3656036 133395 None Approved rates Devanahalli fire station Supplying and fixing Industrial bell Each 9440.0 9440.0 1.0 False None None False None False 9440.0 0 3656037 133395 None 11.8.3 Supply of LED Streetlight 70 Watts luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 Each 7070.56 7070.56 6.0 False None None False None False 42423.36 0 3656038 133395 None 13.2.1 Supplying and Fixing.mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires. Using 25mm dia G.I.pipe Each 1419.54 1419.54 6.0 False None None False None False 8517.24 0 3656039 133395 None 4.1.1 Fabricating, supplying and erecting Swaged tubular Pole of height .m having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved quality and colour and M.S. base plate of suitable size welded at the bottom of the Pole(as per IS) and 40 mm dia GI/flexible PVC pipe of 1m length fitted to the heavy gauge polycarbonate control box including 5 Way connector of size 167 x 125 x 82 mm for 7.5M Pole/ 200 x 160 x 98 mm for remaining length of Pole with front opening cover, with locking arrangements and suitable capacity MCB/DP switch, The Pole shall be erected in cement concrete work (1:2:4) including excavation and refilling of planting depth of the Pole to the ground level and the coping CC shall be upto 0.6m above ground level as per IS2713-7 9m (5m Hb,165.1 mm dia 4.85 mm thick x 2m Hm, 139.7 mm dia 4.50 mm thick x 2m Ht,114.3 mm dia 3.65 mm thick) as per IS 410 SP 32 Each 18290.0 18290.0 4.0 False None None False None False 73160.0 0 3656040 133395 None 11.7.2 Supply of LED pole mounting type post top lantern 25 Watts with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr@ Lumen Maintenance Each 9111.96 9111.96 3.0 False None None False None False 27335.88 0 3656041 133395 None 13.6 Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires. No 233.64 233.64 3.0 False None None False None False 700.92 0 3656042 133395 None 32.05 Supplying of 1.1 KV LT UG cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) Mtr 167.37 167.37 100.0 False None None False None False 16737.0 0 3656043 133395 None 32.09 Supplying of 1.1 KV LT UG cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397535 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) Mtr 181.79 181.79 150.0 False None None False None False 27268.5 0 3656044 133395 None 32.03 Supplying of 1.1 KV LT UG cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm, 4 Core, (10 GI Strips - 4 x 0.8 mm) Mtr 139.24 139.24 200.0 False None None False None False 27848.0 0 3656045 133395 None 21.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm Mtr 24.64 24.64 300.0 False None None False None False 7392.0 0 3656046 133395 None 21.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm Mtr 36.73 36.73 150.0 False None None False None False 5509.5 0 3656047 133395 None Ele SR 19-20 6.6.1 Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (ordinary) Mtr 89.68 89.68 250.0 False None None False None False 22420.0 0 3656048 133395 None Ele SR 14-15 7.20.4 Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/Bends/End-caps of same materials in exisiting trench as per IS 14930 part -II suitable for drawing under ground cables.63mm OD / 50mm ID Mtr 307.98 307.98 60.0 False None None False None False 18478.8 0 3656049 133395 None Ele SR 14-15 7.20.1 Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/Bends/End-caps of same materials in exisiting trench as per IS 14930 part -II suitable for drawing under ground cables.40mm OD / 32mm ID Mtr 115.64 115.64 200.0 False None None False None False 23128.0 0 3656050 133395 None Ele SR 19-20 6.9.1 Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.) 40mm Mtr 395.3 395.3 10.0 False None None False None False 3953.0 0 3656051 133395 None 9.3.2 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. 3 kVA ON LINE UPS Mtr 45688.42 45688.42 2.0 False None None False None False 91376.84 0 3656052 133395 None 9.5.5 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 60 /65 AH capacity h No 7567.34 7567.34 16.0 False None None False None False 121077.44 0 3656053 133395 None 6.22 Supplying fixing of Network Switches 16 Port 10/100 Switch No 5672.26 5672.26 2.0 False None None False None False 11344.52 0 3656054 133395 None 8.9.6 Supplying fixing of Network Switches 16 Port 10/100 Switch Nos 2891.0 2891.0 2.0 False None None False None False 5782.0 0 3656055 133395 None 8.11.1 Supplying & fixing of 2 mtrs. Cat 6Patch Cable. 2Mtr Each 303.26 303.26 12.0 False None None False None False 3639.12 0 3656056 133395 None 8.12.2 Supplying & Fixing of Patch panel for Lan Cabling. 24 Port 10/100 Patch Panel Each 4838.0 4838.0 2.0 False None None False None False 9676.0 0 3656057 133395 None 8.1 LAN networking: Supplying and drawing UTP-CAT 6E LAN cable. 3 kVA ON LINE UPS Each 44.84 44.84 400.0 False None None False None False 17936.0 0 3656058 133395 None 8.4.2 Supplying fixing of Network Switches 16 Port 10/100 Switch Each 8232.86 8232.86 2.0 False None None False None False 16465.72 0 3656059 133395 None 8.10.2 Supplying & Fixing of I/O Socket with back box Double I/O Each 649.0 649.0 8.0 False None None False None False 5192.0 0 3656060 133395 None Civil SR 18-19 Pg-XLVII 4 Pump sets : Supply, Installing fixing, testing and commissioning of Vertical/ Horizontal multistage 3 phase 5 HP Mono submersible pumpset, of adequate HP, capable of giving a required discharge at suitable head,to 'work on 3 Ph 50 Hz, 400/440V with necessary gate valve, NRV , unions,flanges in 1:2:4 etc., complete with wiring fromTPN switch to control panel and to the pumps etc. complete. Set 26231.4 26231.4 1.0 False None None False None False 26231.4 0 3656061 133395 None 5.1 Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 230/440 V 1/3 phase motor upto 5 HP Each 2273.86 2273.86 2.0 False None None False None False 4547.72 0 3656062 133395 None Approved rates PG 2025 Fixing charges of pumpset after aligning, leveling & assembling etc, inclusive of transportation charges to work spot. No 1180.0 1180.0 2.0 False None None False None False 2360.0 0 3656063 133395 None Approved rates PG 2025 Supplying of 50 mm kirloskar / other approved make CI screwed foot valve. Make- Using group "A" materials. And as per the directions of engineer incharge of the work. No 531.0 531.0 2.0 False None None False None False 1062.0 0 3656064 133395 None 5.6.6 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 20"X20"x2.5" Each 384.83 384.83 2.0 False None None False None False 769.66 0 3656065 133395 None Approved rates Supply of erection testing and commissioning of water level controller and connected accessoriersetc No 4720.0 4720.0 1.0 False None None False None False 4720.0 0 3656066 133395 None Civil SR 21-22 P150G Providing,supplying to work site, 7.50 HP 15 STG Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work Set 51934.16 51934.16 1.0 False None None False None False 51934.16 0 3656067 133395 None Civil SR-2021-22 P250A Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendment 50 mm dia nominal Each 1475.0 1475.0 1.0 False None None False None False 1475.0 0 3656068 133395 None Civil SR-2021-22 P260A Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendment size 50 mm Each 1504.5 1504.5 1.0 False None None False None False 1504.5 0 3656069 133395 None Civil SR-2021-22 P280B Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL Direct Online Starter 2) S-D- Star Delta Starter for outdoor 6 to 15 HP pumps Set 19470.0 19470.0 1.0 False None None False None False 19470.0 0 3656070 133395 None KUWSS&DB. (page 1). Erection of panel and Meter Borad : Erection of combined panel borad and meter borad unit with necessary materials and labour charges Inculuding providing cement concrete foundation bed ect complete. Set 435.42 435.42 1.0 False None None False None False 435.42 0 3656071 133395 None KUWSS&DB. Erection, Electrification and commissioning Work of Pump Sets : eraction of pumpset including aligning and balancing with all necessary erection materials and labour including supply and erection of two pair of supporting clamps, bore-well, cap, cable protector bolts, nuts, valve and gauges ect., Set 1744.04 1744.04 1.0 False None None False None False 1744.04 0 3656072 133395 None 2.6.3 Supplying and Drawing 3 core flat PVC sheathed sumersible grade copper with flxible copper conductor confirming to rable 3 class 5 of IS: 8130-198 and virgin grade PVC insulation and sheethed suitable for working voltage upto 1100Volts. 4Sqmm of 56 strands 0.3mm dia. Make - Group ""A"" materials and as per the directions of Engineer in charge of the work. Rmtr 198.24 198.24 600.0 False None None False None False 118944.0 0 3656073 133395 None Civil SR-2018-19 Pg-92 13.15 KSRB13-3.1: Providing and fixing in trenches galvanised / mild steel tubes (medium grade) nominal bore with all fittings (earth work in trenches to be measured and paid for separately) including cost of all materials, labour charges, HOM and testing complete as per specifications. Specification No.KBS 50 mm dia Mtr 457.84 457.84 300.0 False None None False None False 137352.0 0 3656074 133395 None Bescom sr 21-22 CDS-60 Supplying & erection of Star rated 63 KVA transformer center 11kV/433V, 9 mtr RCC DP Transformer Structure with 9 mtr long RCC pole complete set materials like angle iron, bedding channels, belting cross arms bracess, round clamps etc.,(as per BESCOM SR 2021-22) and wiring with suitable capacity LT Lead wires, earthing 3 nos, forming transformer structure including transformer and labour charges and maintanence of one year or as per current KPTCL norms.Obtaining Govt.electrical inspectorate approval, charging and handing over to BESCOM in full manner. Make - ESCOM approved makes Set 310437.94 310437.94 1.0 False None None False None False 310437.94 0 3656075 133395 None Bescom SR 21-22 4.06 Construction of platform with size stone, cement concert for erection of 500 kVA Transformer/Metering cubicle/Heavy Equipment.Construction of platform (1.5x1.5x1.2) Mtr in size stone, for erection of transformers/Heavy equipment including all materials, labour. Excavation of (1.5x1.5x1) Mtr pit for foundation providing and laying cement concrete 1:4:8 for foundation laid in 10 cm thick layers, well compacted curing etc., complete providing and construction of stone masonary 0.9 Mtr below ground level and 1.2 Mtr above ground level neatly hammer dressed in cement morter 1:6. Providing and Laying cement concrete slab 1.5x1.5x0.10 Mtr withcement concrete of 1:2:4 mix forming & cutting complete, providing pointing to stone masonary in cement morter 1:3 after racking joint & nisely lining curing etc., plastering the concrete surfaces in cement morter 1:4 including smooth randering curing etc., curing at every stages completely Each 35825.98 35825.98 1.0 False None None False None False 35825.98 0 3656076 133395 None Bescom SR 21-22 CDS- 57 Providing Doble pole Structure at Tapping poin using PSCC pole Job 69553.92 69553.92 1.0 False None None False None False 69553.92 0 3656077 133395 None Bescom SR 21-22 67.20 Supplying & Fixing of Caution/Danger Board No 172.28 172.28 3.0 False None None False None False 516.84 0 3656078 133395 None Civil SR-18-19 37.2 Supplying and fixing M.S. Rectangular poles made out of 2 equal angles of 65x65x6 mm welded together and fixed in CC (1:2:4) WITH 2 NOS 16mm dia M.S. hold fast rods each of length 25 cms. Including cost of all materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all lead lifts and as per the directions of the Engineer-in - charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting ( excluding cost of earthwork and concrete) including cost of materials, labour, HOM complete as per specifications Mtr 1013.62 1013.62 30.0 False None None False None False 30408.6 0 3656079 133395 None Bescom SR 21-22 38 Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint Sqm 1164.66 1164.66 40.0 False None None False None False 46586.4 0 3656080 133395 None Civil SR Providing and spreading jelly-40mm size for transformer yard-(15'x20'-150mm) etc complete as per directions of engineer in charge of the work Cum 1180.0 1180.0 3.0 False None None False None False 3540.0 0 3656081 133395 None 5.41.1 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron… and M S flat ……. With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint, 40x40x6mm as per the directions of the engineer in charge of the work. Mtr 359.68 359.68 42.0 False None None False None False 15106.56 0 3656082 133395 None 1.01 RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 No 8349.68 8349.68 2.0 False None None False None False 16699.36 0 3656083 133395 None 7.02 ACSR Conductor as per IS-398 (Part - 2/1996) Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM Km 54556.12 54556.12 0.5 False None None False None False 27278.06 0 3656084 133395 None 2.02 Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth No 1313.34 1313.34 2.0 False None None False None False 2626.68 0 3656085 133395 None 6.02 Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps do - for Rabbit ACSR Km 5145.98 5145.98 0.5 False None None False None False 2572.99 0 3656086 133395 None Bescom SR 21-22 2.02 Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth No 863.0 863.0 5.0 False None None False None False 4315.0 0 3656087 133395 None Bescom SR 21-22 5.17 Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps do - for Rabbit ACSR Km 3299.0 3299.0 0.6 False None None False None False 1979.4 0 3656088 133395 None Bescom SR 21-22 2.05 Supplying & fixing LT 4 Pin Cross Arm - MS (Dwg No. BESCOM/GM/QS&S/32 Dtd 24.11.2018) No 303.0 303.0 2.0 False None None False None False 606.0 0 3656089 133395 None Bescom SR 21-22 2.01 Supplying & fixing 11 kV, Horizontal Cross Arm - Mild Steel (MS) (Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018) No 390.0 390.0 4.0 False None None False None False 1560.0 0 3656090 133395 None Bescom SR 21-22 5.10 Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) Set 201.0 201.0 2.0 False None None False None False 402.0 0 3656091 133395 None 6.02 Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps do - for Rabbit ACSR Km 5145.98 5145.98 0.5 False None None False None False 2572.99 0 3656092 133395 None 2.01 Supplying & fixing 11 kV, Horizontal Cross Arm - Mild Steel (MS) (Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018) No 438.96 438.96 2.0 False None None False None False 877.92 0 3656093 133395 None 5.10 Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) Set 313.88 313.88 2.0 False None None False None False 627.76 0 3656094 133395 None 36.07 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 - 400 Sqmm, (51 GI Wires - 4 mm Dia) Mtr 2945.82 2945.82 30.0 False None None False None False 88374.6 0 3656095 133395 None 45.03 11 kV, Jointing & Cable Termination Kit as per IS-1357 Heat Shrinkable Type Transition Jointing Kit for XLPE Cable 3X400 Sqmm Each 15218.46 15218.46 2.0 False None None False None False 30436.92 0 3656096 133395 None 45.09 Heat Shrinkable Outdoor Type Cable Termination Each 6322.44 6322.44 2.0 False None None False None False 12644.88 0 3656097 133395 None NSR 1 Shiftng Charges11KVLINE LS 236000.0 236000.0 1.0 False None None False None False 236000.0 0 3656098 133395 None Approved rates Supplying and insstaling water purifire filter 25 Ltr Each 29500.0 29500.0 1.0 False None None False None False 29500.0 0 3656099 133395 None CIVIL SR Pump sets Supply, Installing fixing, testing and ommissioning of Vertical/ Horizontal multistage 3 phase 1 HP Monosubmersiblepumpset, of adequate HP, capable of giving a required discharge atsuitablehead,to work on 3 Ph 50 Hz, 400/440V with necessary gate valve Set 10782.84 10782.84 1.0 False None None False None False 10782.84 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1722411480000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1722411480000 1 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1722411480000 1 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of karnataka public procurement portal due to internet connectivity issues and technical glitches at bidder s end. None 1722411480000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1722411480000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1722412323000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contract value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1722412331000 0 None None ELIGIBILITY The tender document is part and parcel of the agreement. None 1722412347000 0 None None ELIGIBILITY The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any None 1722412355000 0 None None ELIGIBILITY The bidder shall study the Tender document Carefully and quote the rates. None 1722412362000 0 None None ELIGIBILITY Drawings uploaded are only for Tender Purpose only None 1722412370000 0 None None ELIGIBILITY The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KSPH & IDCL have the right to deduct the work bills and remit the same to respective PF offices. None 1722412382000 0 None None ELIGIBILITY The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time and if any variation occurs it shall be paid / refunded by / to the Corporation against documentary evidence None 1722412388000 0 None None ELIGIBILITY The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act None 1722412398000 0 None None ELIGIBILITY Remittance towards PF shall be commensurate with the labour component of the work involved. None 1722412404000 0 None None ELIGIBILITY The Bidder shall remit PF of labourers to Bidders permanent PF code number only None 1722412413000 0 None None ELIGIBILITY The bidder should maintain register of labourers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved. None 1722412425000 0 None None ELIGIBILITY The contractor shall obtain insurance coverage for all the workers deployed for this work. None 1722412436000 0 None None ELIGIBILITY Corrigendum/modification/corrections, if any, will be published in the karnataka public procurement portal and www.ksphc.org web sites only. None 1722412445000 0 None None ELIGIBILITY Bounded scanned hard copies are to be submitted duly marking the Page Nos. within 3 days after the last date of submission of the bid documents online to EE(Contracts), KSPH & IDCL, Bangalore. None 1722412454000 0 None None ELIGIBILITY The rates quoted by the Contractor shall be deemed to be inclusive of all applicable taxes, GST, levies, duties and cess, Building Workers Welfare Cess etc., as applicable as per the latest Notifications of GoK and GoI prevailing as on the date of NIT. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law. The Contractor should submit the tax invoice along with RA Bills. None 1722412474000 0 None None ELIGIBILITY Further details of the work or any clarifications can be obtained from the office of the Executive Engineer(Contracts), KSPH & IDCL, Richmond Road, Bangalore 560025. Ph: 080-25584102 Extn - 130 / 114 / 117 None 1722412482000 0 None None ELIGIBILITY The bidder should furnish the documents relating to registration of GST None 1722412490000 0 None None ELIGIBILITY The bidder should furnish the valid address, phone number & e mail ID None 1722412499000 0 None None ELIGIBILITY The intended bidder shall visit the site & quote his offer accordingly and for having visited the site, they should upload the photos while submitting the tender. None 1722412582000 0 None None ELIGIBILITY Tenders must be accompanied by Earnest Money Deposit (EMD) of Rs. 4.03 Lakhs (Rupees Four Lakhs Three Thousand only), which may be paid fully through Karnataka Public Procurement Portal or Out of total EMD amount Rs. 1.00 lakh (Rupees One Lakh only) shall be paid online through Karnataka Public Procurement Portal using any of the following Payment Modes: Credit Card, Direct Debit, National Electronic Fund Transfer (NEFT), Over the Counter (OTC) and the balance amount of Rs. 3.03 Lakhs (Rupees Three Lakhs Three Thousand only) in the form of Bank Guarantee (BG) only issued from Nationalized/Scheduled Commercial Banks in the Name of MD, KSPH&IDCL, Bengaluru. The scan copy of the Bank Guarantee (BG) to be uploaded at the time of submission of bid documents and the original Bank Guarantee should be submitted to Office of the Executive Engineer (Contracts), KSPH & IDCL, No.59, Gen. K.S. Thimmayya Road, Bangalore 560025 On or before the Last date of receipt of tender and the non-compliance of the same leads to the rejection of the bid. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None 1.3 of Section-3 Qualification Information: Work performed as Prime Contractor (in the same name) on works of similar nature over during the five years (2019-20 to 2023-24) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer None None None None 1.4 of Section-3 : Quantities of work executed as prime contractor (in the same name) during the last five years (2019-20 to 2023-24) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer None None None None 1.5 of Section-3 Qualification Information : Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender : (A) Existing commitments and ongoing works & (B) Works for which Tenders already submitted Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer None None None None 1.7 of Section-3: Qualification Information: Reports on the financial standing of the tenderer, such as profit and Loss statements and auditors reports for the last five years. (2019-20 to 2023-24) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Profit & Loss Statement from Registered Chartered Accountant None None None None 3.2- To qualify for award of this contract, each Tender in his/her/their name should have in the last five years i.e. 2019-20 to 2023-24): (b) Satisfactorily completed as prime contractor (at least 90% of the contract value), at least one similar nature of work of value not less than Rs.134.30 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Work Done certificate issued not below the rank of an Executive Engineer or equivalent. None None None None ITT - 3.2 d) The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totalling Rs.11.50 Lakhs in any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Workdone certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded. None None None None 3.2 (e) The Tenderer or his identified subcontractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs.2.82 Lakhs in any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Workdone certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded. None None None None Be a Class-II & above Civil registered contractor of State PWDs / Central/MES/ Govt. Undertakings Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Valid Registration Certificate issued by respective Depts None None None None Be Registered with KSPH & IDCL Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Valid Registration Certificate issued by KSPHCL None None None None Income Tax returns & PAN Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Income Tax returns and PAN certificates None None None None Be Registered with GST Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Valid Registration Certificate issued by Competent Authority None None None None Be Registered with EPF Authorities Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- EPF Registration Certificate None None None None ITT 3.2 - To qualify for award of this contract, each Tenderer / company in his / its name should have in the last five years i.e. 2019-20 to 2023-24 (c) Executed in any one year the minimum quantities of work executed (Please refer Tender Document) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Certificate issued from not below the rank of an Executive Engineer or equivalent. None None None None ITT 3.3 (c)- Each Tenderer should further demonstrate Liquid assets and /or availability of credit facilities of no less than Rs.73.50 Lakhs (Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks for meeting the fund requirement etc (Unconditional) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Letter of Credit Certificates from Nationalized / Scheduled banks for meeting the fund requirement None None None None ITT 3.2 - To qualify for award of this contract, each Tenderer in his/her/their name should have in the last five years i.e. 2019-20 to 2023-24: (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.537.15 Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Attach Certificate from Registered Chartered Accountant with UDIN Number None None None None 1.8 of Section-3 Qualification Information: Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are Proposed to be deployed on this contract, if awarded. Others Others createdTs version createdDate modifiedDate documentName None None None None Others -- Organization Chart & Company Profile
tenderCriterionDocumentList	documentName optional documentTypeText KSPH & IDCL Registration Certificate True Technical Bid Class-II & above Civil registered contractor of State PWDs / Central/MES/Govt. Undertakings True Technical Bid Income Tax returns & PAN True Technical Bid EPF Registration Certificate True Technical Bid Work Done Certificate - ITT 3.2 b Similar nature Work done certificate True Technical Bid Liquid assets and availability of credit facilities True Technical Bid Turnover Certificate - ITT 3.2 a True Technical Bid 1.3.of Section-3 Qualification Information True Technical Bid 1.4.of Section-3 Qualification Information True Technical Bid 1.7.of Section-3 Qualification Information True Technical Bid GST Registration Certificate True Technical Bid Executed minimum quantities of work - ITT 3.2 c True Technical Bid Work Done Certificate - ITT 3.2 d Electrical Work done certificate True Technical Bid Work Done Certificate - ITT 3.2 e Water supply /sanitary Work done certificate True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1722504284000 version 0 createdDate None modifiedDate None blockNumber No. 59, Richmond Road (Gen. K.S.Thimmaiah Road) street None city Bengaluru state Karnataka pin 560025
tenderRecallDTO	None