createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1722508691498 version 7 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 1610.00 emd 128465.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 12-08-2024 16:00:00 tenderQueryClose 05-08-2024 16:00:00 technicalBidOpen 14-08-2024 11:00:00 publishedDate 01-08-2024 16:23:35 publishedByPost HRICE_AO_SDT_KTL_DK publishedByUser KPE12079 - SANATH KUMAR SHETTY bidValidityPeriod 90 noOfCalls 3 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson Srivyasa splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9008241390 tenderSupplierList None
tenderSchedule	createdTs 1722508691501 version 26 createdDate None modifiedDate None tenderNumber HRICE/2023-24/BD/WORK_INDENT7/CALL-3 title Construction Administrative Office Building at SDP Temple Kateel description Construction Administrative Office Building at SDP Temple Kateel category WORKS categoryText Works ecv 6423275.25 deptName Hindu Religious Institutions And Charitable Endowments Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 3378 locationName Sri Durgaparameshwari Temple Kateel Dakshina Kannada provisionalAmount 9000000.0 groupOverheadTotal None fileNumber ADM/CR/24/2023/226980/F5
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1722508692000 1 None None Buildings Construction Administrative Office Building at SDP Temple Kateel (Ground Floor) 1325802.99 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3667257 133909 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the workIn all kinds of soils Depth upto 3 m Page No.8,Item No.1.14.1 vol 1SR 2021-22 Cum 81.76 81.76 18.23 False None None False None False 1490.4848 0 3667258 133909 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depthPage No.6,Item No.1.15.1 vol 1SR 2021-22 Cum 304.64 304.64 12.15 False None None False None False 3701.376 0 3667259 133909 None code03 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.Page No.5,Item No.4.1 vol 2 SR 2021-22 Sqm 106.4 106.4 117.45 False None None False None False 12496.68 0 3667260 133909 None code04 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Page No.15,Item No.2.1.3 vol 2 SR 2021-22 Cum 6220.48 6220.48 3.04 False None None False None False 18910.2592 0 3667261 133909 None code05 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7232.2 7232.2 6.49 False None None False None False 46936.978 0 3667262 133909 None code06 Providing and laying in position Reinforced cement concretefor allSub structures of building, Irrigation works, Sub structure works ofbridges, Drain works& other parallel works from 0.50m to 3.50 mheight. The granite/trap/basalt crushed graded coarse aggregates andfine aggregatesas per relevant IS Codes machine mixed with superplasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wher ever necesary, including all lead & lifts,costof all materials of quality, confirming to the requirements of relevant IS codes ,labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) Including formworkM25 Design Mix Using 20mm nominal size graded crushed coarse aggregates Cum 10066.56 10066.56 11.07 False None None False None False 111436.8192 0 3667263 133909 None code07 Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)Page No.84,Item No.11.32 vol 2 Kg 92.96 92.96 578.15 False None None False None False 53744.824 0 3667264 133909 None code08 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.Page No.7,Item No.1.9 vol 1 Cum 228.48 228.48 47.45 False None None False None False 10841.376 0 3667265 133909 None code09 Providing and constructing laterite size stone masonry including cost and conveyance of materials curing etc complete as per specification FOR foundation in C M 1:6S.R.2022-23 Item No. 6.35 vol-II Cum 6265.29 6265.29 4.64 False None None False None False 29070.9456 0 3667266 133909 None code10 Providing and fixing Structural Steel work riveted, bolted or weldedin built up sections, trusse sand framed work, including cutting, hoisting, fixingin positionan dapplying apriming coat of approved steel primer all complete including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions ofthe Engineer-in-Charge. Kg 106.4 106.4 6010.77 False None None False None False 639545.928 0 3667267 133909 None code11 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.Page No.70,Item No.6.32 vol 2 Cum 1339.52 1339.52 55.5 False None None False None False 74343.36 0 3667268 133909 None code12 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Page No.41,Item No.8.2.1 vol 2 Sqm 277.76 277.76 54.61 False None None False None False 15168.4736 0 3667269 133909 None code13 Providing 18 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Page No.42,Item No.8.9 vol 2 Sqm 360.64 360.64 59.0 False None None False None False 21277.76 0 3667270 133909 None code14 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 sqm) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 45 Sl. No. 8.28 vol-2 SR 2021-22) Sqm 73.92 73.92 59.0 False None None False None False 4361.28 0 3667271 133909 None code15 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(Page No. 50, Sl. No. 8.51 Vol-2 SR 2021-22) Sqm 92.96 92.96 54.61 False None None False None False 5076.5456 0 3667272 133909 None code16 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Page No. 46, Sl. No. 8.33 Vol-2 SR 2021-22) Sqm 132.16 132.16 54.61 False None None False None False 7217.2576 0 3667273 133909 None code17 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sgm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 46, Sl. No. 8.30 Vol-2 SR 2021-22) Sqm 152.32 152.32 59.0 False None None False None False 8986.88 0 3667274 133909 None code18 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(Page No. 99 Sl. No. 12.11 vol-2 SR 2021-22) Cum 101240.16 101240.16 0.37 False None None False None False 37458.8592 0 3667275 133909 None code19 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures )(Page No. 100 Sl. No. 12.15 vol-2 SR 2021-22) Sqm 5682.88 5682.88 2.58 False None None False None False 14661.8304 0 3667276 133909 None code20 Providing and fixing in position Mathi/Nandi wood fully panelled shutters for windows with stiles and rails of 35mm. thick,75mm wide in twohalves with panels of 25mm thick including cost of materials, labourcharges, usage charges complete as per specifications.(excludingcostoffixtures)(Page No. 110 Sl. No. 12.24 vol-2 SR 2021-22) Sqm 5180.0 5180.0 10.13 False None None False None False 52473.4 0 3667277 133909 None code21 Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.Page No.85,Item No.11.34 A vol 2 Kg 146.72 146.72 220.19 False None None False None False 32306.2768 0 3667278 133909 None code22 French spirit polishing :Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 49, Sl. No. 8.46 Vol-2 SR 2021-22) Sqm 258.72 258.72 14.75 False None None False None False 3816.12 0 3667279 133909 None code23 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 47, Sl. No. 8.33.3 Vol-2 SR 2021-22) Sqm 118.72 118.72 15.36 False None None False None False 1823.5392 0 3667280 133909 None code24 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Page No.60,Item No.9.12.2 vol 2 SR 2021-22 Sqm 1217.44 1217.44 22.75 False None None False None False 27696.76 0 3667281 133909 None code25 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.Page No.65,Item No.9.39 vol 2 SR 2021-22 Sqm 1161.44 1161.44 3.11 False None None False None False 3612.0784 0 3667282 133909 None code26 Providing and fixing of Laterite cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive over rough plaster surface excluding cost of rough plas- tered surface. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification.S.R.2022-23 Item No. 10.21 p no 72 vol-II Sqm 2213.12 2213.12 34.83 False None None False None False 77082.9696 0 3667283 133909 None code27 Providing and fixing Mangalore tile roofing using first class tiles with necessary special tiles for ridges and hips, wood reepers and pointed with cement mortar 1:4 over the existing rafters including cost of materials, labour, curing complete as per specifications. Nandi wood reepers of size 50x25mmS.R.2022-23 Item No. 7.37.1 p no 26 vol-II Sqm 902.72 902.72 11.37 False None None False None False 10263.9264 0 1722508692000 0 None None Buildings Construction Administrative Office Building at SDP Temple Kateel (First Floor) 2716296.58 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3667284 133910 None code01 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 25 mm nominal size graded crushed coarse aggregatesPage No.17,Item No.2.5.2 Additionalities for formwork P.No.115 Cum 10392.48 10392.48 4.18 False None None False None False 43440.5664 0 3667285 133910 None code02 Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)Page No.84,Item No.11.32 vol 2 Kg 92.96 92.96 751.86 False None None False None False 69892.9056 0 3667286 133910 None code03 Providing and fixing Structural Steel work riveted, bolted or weldedin built up sections, trusse sand framed work, including cutting, hoisting, fixingin positionan dapplying apriming coat of approved steel primer all complete including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions ofthe Engineer-in-Charge. Kg 107.46 107.46 16729.24 False None None False None False 1797724.1304 0 3667287 133910 None code04 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.Page No.70,Item No.6.32 vol 2 Cum 1352.92 1352.92 80.21 False None None False None False 108517.7132 0 3667288 133910 None code05 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Page No.41,Item No.8.2.1 vol 2 Sqm 280.54 280.54 79.91 False None None False None False 22417.9514 0 3667289 133910 None code06 Providing 18 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Page No.42,Item No.8.9 vol 2 Sqm 364.25 364.25 89.42 False None None False None False 32571.235 0 3667290 133910 None code07 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 sqm) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 45 Sl. No. 8.28 vol-2 SR 2021-22) Sqm 74.66 74.66 89.42 False None None False None False 6676.0972 0 3667291 133910 None code08 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(Page No. 50, Sl. No. 8.51 Vol-2 SR 2021-22) Sqm 93.89 93.89 79.91 False None None False None False 7502.7499 0 3667292 133910 None code09 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Page No. 46, Sl. No. 8.33 Vol-2 SR 2021-22) Sqm 133.48 133.48 79.91 False None None False None False 10666.3868 0 3667293 133910 None code10 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 46, Sl. No. 8.30 Vol-2 SR 2021-22) Sqm 153.84 153.84 89.42 False None None False None False 13756.3728 0 3667294 133910 None code11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(Page No. 99 Sl. No. 12.11 vol-2 SR 2021-22) Cum 102252.56 102252.56 0.68 False None None False None False 69531.7408 0 3667295 133910 None code12 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures )(Page No. 100 Sl. No. 12.15 vol-2 SR 2021-22) Sqm 5739.71 5739.71 5.16 False None None False None False 29616.9036 0 3667296 133910 None code13 Providing and fixing in position Mathi/Nandi wood fully panelled shutters for windows with stiles and rails of 35mm. thick,75mm wide in twohalves with panels of 25mm thick including cost of materials, labourcharges, usage charges complete as per specifications.(excludingcostoffixtures)(Page No. 110 Sl. No. 12.24 vol-2 SR 2021-22) Sqm 5231.8 5231.8 18.23 False None None False None False 95375.714 0 3667297 133910 None code14 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Page No. 83, Sl. No. 11.28 Vol-2 SR 2021-22) Kg 560.0 560.0 134.42 False None None False None False 75275.2 0 3667298 133910 None code15 Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.Page No.85,Item No.11.34 A vol 2 Kg 148.19 148.19 390.29 False None None False None False 57837.0751 0 3667299 133910 None code16 French spirit polishing :Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 49, Sl. No. 8.46 Vol-2 SR 2021-22) Sqm 261.31 261.31 27.55 False None None False None False 7199.0905 0 3667300 133910 None code17 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 47, Sl. No. 8.33.3 Vol-2 SR 2021-22) Sqm 119.91 119.91 27.36 False None None False None False 3280.7376 0 3667301 133910 None code18 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Page No.60,Item No.9.12.2 vol 2 SR 2021-22 Sqm 1229.61 1229.61 63.99 False None None False None False 78682.7439 0 3667302 133910 None code19 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.Page No.65,Item No.9.39 vol 2 SR 2021-22 Sqm 1173.05 1173.05 20.64 False None None False None False 24211.752 0 3667303 133910 None code20 Providing and fixing of Laterite cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive over rough plaster surface excluding cost of rough plas- tered surface. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification.S.R.2022-23 Item No. 10.21 p no 72 vol-II Sqm 2235.25 2235.25 64.13 False None None False None False 143346.5825 0 3667304 133910 None code21 Providing and fixing Mangalore tile roofing using first class tiles with necessary special tiles for ridges and hips, wood reepers and pointed with cement mortar 1:4 over the existing rafters including cost of materials, labour, curing complete as per specifications. Nandi wood reepers of size 50x25mmS.R.2022-23 Item No. 7.37.1 p no 26 vol-II Sqm 911.75 911.75 20.59 False None None False None False 18772.9325 0 1722508692000 1 None None Buildings Construction Administrative Office Building at SDP Temple Kateel (Second Floor) 2381175.68 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3667305 133911 None code01 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 25 mm nominal size graded crushed coarse aggregatesPage No.17,Item No.2.5.2 Additionalities for formwork P.No.115 Cum 10496.4 10496.4 4.18 False None None False None False 43874.952 0 3667306 133911 None code02 Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)Page No.84,Item No.11.32 vol 2 Kg 93.89 93.89 751.86 False None None False None False 70592.1354 0 3667307 133911 None code03 Providing and fixing Structural Steel work riveted, bolted or weldedin built up sections, trusse sand framed work, including cutting, hoisting, fixingin positionan dapplying apriming coat of approved steel primer all complete including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions ofthe Engineer-in-Charge. Kg 108.53 108.53 12738.31 False None None False None False 1382488.7843 0 3667308 133911 None code04 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.Page No.70,Item No.6.32 vol 2 Cum 1366.31 1366.31 80.21 False None None False None False 109591.7251 0 3667309 133911 None code05 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Page No.41,Item No.8.2.1 vol 2 Sqm 283.32 283.32 79.91 False None None False None False 22640.1012 0 3667310 133911 None code06 Providing 18 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Page No.42,Item No.8.9 vol 2 Sqm 367.85 367.85 89.42 False None None False None False 32893.147 0 3667311 133911 None code07 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 sqm) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 45 Sl. No. 8.28 vol-2 SR 2021-22) Sqm 75.4 75.4 53.42 False None None False None False 4027.868 0 3667312 133911 None code08 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(Page No. 50, Sl. No. 8.51 Vol-2 SR 2021-22) Sqm 94.82 94.82 79.91 False None None False None False 7577.0662 0 3667313 133911 None code09 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Page No. 46, Sl. No. 8.33 Vol-2 SR 2021-22) Sqm 134.8 134.8 79.91 False None None False None False 10771.868 0 3667314 133911 None code10 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 46, Sl. No. 8.30 Vol-2 SR 2021-22) Sqm 155.37 155.37 53.42 False None None False None False 8299.8654 0 3667315 133911 None code11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(Page No. 99 Sl. No. 12.11 vol-2 SR 2021-22) Cum 103264.96 103264.96 0.68 False None None False None False 70220.1728 0 3667316 133911 None code12 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures )(Page No. 100 Sl. No. 12.15 vol-2 SR 2021-22) Sqm 5796.54 5796.54 5.16 False None None False None False 29910.1464 0 3667317 133911 None code13 Providing and fixing in position Mathi/Nandi wood fully panelled shutters for windows with stiles and rails of 35mm. thick,75mm wide in twohalves with panels of 25mm thick including cost of materials, labourcharges, usage charges complete as per specifications.(excludingcostoffixtures)(Page No. 110 Sl. No. 12.24 vol-2 SR 2021-22) Sqm 5283.6 5283.6 18.23 False None None False None False 96320.028 0 3667318 133911 None code14 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Page No. 83, Sl. No. 11.28 Vol-2 SR 2021-22) Kg 560.0 560.0 134.42 False None None False None False 75275.2 0 3667319 133911 None code15 Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.Page No.85,Item No.11.34 A vol 2 Kg 149.65 149.65 390.29 False None None False None False 58406.8985 0 3667320 133911 None code16 French spirit polishing :Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 49, Sl. No. 8.46 Vol-2 SR 2021-22) Sqm 263.89 263.89 27.55 False None None False None False 7270.1695 0 3667321 133911 None code17 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No. 47, Sl. No. 8.33.3 Vol-2 SR 2021-22) Sqm 121.09 121.09 27.36 False None None False None False 3313.0224 0 3667322 133911 None code18 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Page No.60,Item No.9.12.2 vol 2 SR 2021-22 Sqm 1241.79 1241.79 64.27 False None None False None False 79809.8433 0 3667323 133911 None code19 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.Page No.65,Item No.9.39 vol 2 SR 2021-22 Sqm 1184.67 1184.67 22.49 False None None False None False 26643.2283 0 3667324 133911 None code20 Providing and fixing of Laterite cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive over rough plaster surface excluding cost of rough plas- tered surface. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification.S.R.2022-23 Item No. 10.21 p no 72 vol-II Sqm 2257.38 2257.38 70.83 False None None False None False 159890.2254 0 3667325 133911 None code21 Providing and fixing Mangalore tile roofing using first class tiles with necessary special tiles for ridges and hips, wood reepers and pointed with cement mortar 1:4 over the existing rafters including cost of materials, labour, curing complete as per specifications. Nandi wood reepers of size 50x25mmS.R.2022-23 Item No. 7.37.1 p no 26 vol-II Sqm 920.77 920.77 88.36 False None None False None False 81359.2372 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1722508692000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1722508692000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1722508692000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1722508692000 0 None None ELIGIBILITY All Terms & Conditions as per attached tender document. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. 32.11 Lakhs (80% of estimated cost of tender) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year the following minimum quantities of work As per attached Tender Document (80% of peak rate of construction) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 64.23 Lakhs) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and /or availability of credit facilities of no less than Rs.19.27 Lakhs (estimated cash flow for 3 months of peak construction period) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText KPWD Registration Certificate True Technical Bid Assessed available tender capacity document True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None