| 1722679784000 | 0 | None | None | Buildings | Construction of Second Floor to the Laboratory Block of University College of Science Tumkur University Tumkur | 9483155.56 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3681921 | 134918 | None | TUT1101 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holeswherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - colummus -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 8189.29 | 8189.29 | 18.38 | False | None | None | False | None | False | 150519.1502 | 0 | | 3681922 | 134918 | None | TUT1102 | Form work for colum at 70% of concret quantity item no 1 of 18.38 cum including leed and lift charges loading and unloading charges, labour charges all incidencial charges, hire charges of all machenerys and equipment required for succcessfull complition of work etc complite. The work shall be exicuted as for standed technical specification and directions of engineer incharge of the work -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 6002.42 | 6002.42 | 18.38 | False | None | None | False | None | False | 110324.4796 | 0 | | 3681923 | 134918 | None | TUT1103 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holeswherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates chajja & cills -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 8189.29 | 8189.29 | 7.75 | False | None | None | False | None | False | 63466.9975 | 0 | | 3681924 | 134918 | None | TUT1104 | Form work for Chejjas and Cill at 45% of concret quantity item no 3 of 8.31 cum including leed and lift charges loading and unloading charges, labour charges all incidencial charges, hire charges of all machenerys and equipment required for succcessfull complition of work etc complite. The work shall be exicuted as for standed technical specification and directions of engineer incharge of the work -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 3995.24 | 3995.24 | 7.75 | False | None | None | False | None | False | 30963.11 | 0 | | 3681925 | 134918 | None | TUT1105 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holeswherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates lintels -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 8189.29 | 8189.29 | 7.19 | False | None | None | False | None | False | 58880.9951 | 0 | | 3681926 | 134918 | None | TUT1106 | Form work for Lintel at 60 % of concret quantity item no 5 of 7.10 cum including leed and lift charges loading and unloading charges, labour charges all incidencial charges, hire charges of all machenerys and equipment required for succcessfull complition of work etc complite. The work shall be exicuted as for standed technical specification and directions of engineer incharge of the work -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 5199.55 | 5199.55 | 7.19 | False | None | None | False | None | False | 37384.7645 | 0 | | 3681927 | 134918 | None | TUT1107 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holeswherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Beams. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 8189.29 | 8189.29 | 26.0 | False | None | None | False | None | False | 212921.54 | 0 | | 3681928 | 134918 | None | TUT1108 | Form work for Roof beam at 60% of concret quantity item no 8 of 20.84cum including leed and lift charges loading and unloading charges, labour charges all incidencial charges, hire charges of all machenerys and equipment required for succcessfull complition of work etc complite. The work shall be exicuted as for standed technical specification and directions of engineer incharge of the work -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 5199.55 | 5199.55 | 26.0 | False | None | None | False | None | False | 135188.3 | 0 | | 3681929 | 134918 | None | TUT1109 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holeswherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 8189.29 | 8189.29 | 69.24 | False | None | None | False | None | False | 567026.4396 | 0 | | 3681930 | 134918 | None | TUT1110 | Form work for Roof Slab at 50% of concret quantity item no 13 of 72.58 cum including leed and lift charges loading and unloading charges, labour charges all incidencial charges, hire charges of all machenerys and equipment required for succcessfull complition of work etc complite. The work shall be exicuted as for standed technical specification and directions of engineer incharge of the work -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 4396.68 | 4396.68 | 69.24 | False | None | None | False | None | False | 304426.1232 | 0 | | 3681931 | 134918 | None | TUT1111 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Tonne | 113053.97 | 113053.97 | 13.0 | False | None | None | False | None | False | 1469701.61 | 0 | | 3681932 | 134918 | None | TUT1112 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour,scaffolding and curing, usage charges of machinery etc complete as per specifications for second floor -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 1655.55 | 1655.55 | 486.48 | False | None | None | False | None | False | 805391.964 | 0 | | 3681933 | 134918 | None | TUT1113 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 1395.2 | 1395.2 | 54.31 | False | None | None | False | None | False | 75773.312 | 0 | | 3681934 | 134918 | None | TUT1114 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. second floor -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 352.59 | 352.59 | 389.74 | False | None | None | False | None | False | 137418.4266 | 0 | | 3681935 | 134918 | None | TUT1115 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. head room & parapet -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 352.59 | 352.59 | 71.68 | False | None | None | False | None | False | 25273.6512 | 0 | | 3681936 | 134918 | None | TUT1116 | Providing 12 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. second floor -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 304.56 | 304.56 | 980.2 | False | None | None | False | None | False | 298529.712 | 0 | | 3681937 | 134918 | None | TUT1117 | Providing 12 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. second floor head room -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 304.56 | 304.56 | 50.82 | False | None | None | False | None | False | 15477.7392 | 0 | | 3681938 | 134918 | None | TUT1118 | Providing 6 mm cement plaster on the rough side of single or half brick wall of mix :1:3(1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. second floor -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 266.65 | 266.65 | 486.23 | False | None | None | False | None | False | 129653.2295 | 0 | | 3681939 | 134918 | None | TUT1119 | Providing 6 mm cement plaster on the rough side of single or half brick wall of mix :1:3(1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. second floor head room -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 266.65 | 266.65 | 28.0 | False | None | None | False | None | False | 7466.2 | 0 | | 3681940 | 134918 | None | TUT1120 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 1484.94 | 1484.94 | 423.95 | False | None | None | False | None | False | 629540.313 | 0 | | 3681941 | 134918 | None | TUT1121 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete second floor -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 1359.83 | 1359.83 | 39.2 | False | None | None | False | None | False | 53305.336 | 0 | | 3681942 | 134918 | None | TUT1122 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete second floor -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 1397.74 | 1397.74 | 100.8 | False | None | None | False | None | False | 140892.192 | 0 | | 3681943 | 134918 | None | TUT1123 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications second floor -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 6733.42 | 6733.42 | 30.8 | False | None | None | False | None | False | 207389.336 | 0 | | 3681944 | 134918 | None | TUT1124 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge second floor -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 126.37 | 126.37 | 1466.43 | False | None | None | False | None | False | 185312.7591 | 0 | | 3681945 | 134918 | None | TUT1125 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge head room -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 126.37 | 126.37 | 185.0 | False | None | None | False | None | False | 23378.45 | 0 | | 3681946 | 134918 | None | TUT1126 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge second floor -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 125.11 | 125.11 | 1466.43 | False | None | None | False | None | False | 183465.0573 | 0 | | 3681947 | 134918 | None | TUT1127 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge head room -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 125.11 | 125.11 | 185.0 | False | None | None | False | None | False | 23145.35 | 0 | | 3681948 | 134918 | None | TUT1128 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 224.95 | 224.95 | 389.74 | False | None | None | False | None | False | 87672.013 | 0 | | 3681949 | 134918 | None | TUT1129 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 224.95 | 224.95 | 71.68 | False | None | None | False | None | False | 16124.416 | 0 | | 3681950 | 134918 | None | TUT1130 | Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 125872.48 | 125872.48 | 0.48 | False | None | None | False | None | False | 60418.7904 | 0 | | 3681951 | 134918 | None | TUT1131 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. do- 30 mm thick both side commercial -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 3797.66 | 3797.66 | 19.53 | False | None | None | False | None | False | 74168.2998 | 0 | | 3681952 | 134918 | None | TUT1132 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware Multi point locking system with touch lock. Wall thickness of frame sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 8510.28 | 8510.28 | 31.5 | False | None | None | False | None | False | 268073.82 | 0 | | 3681953 | 134918 | None | TUT1133 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 7227.55 | 7227.55 | 6.48 | False | None | None | False | None | False | 46834.524 | 0 | | 3681954 | 134918 | None | TUT1134 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 212.31 | 212.31 | 797.58 | False | None | None | False | None | False | 169334.2098 | 0 | | 3681955 | 134918 | None | TUT1135 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 714.04 | 714.04 | 112.0 | False | None | None | False | None | False | 79972.48 | 0 | | 3681956 | 134918 | None | TUT1136 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement and formwork to be paid separately M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead and lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc, complete as per standard technical detailed specification and design and directions of the Engineer in charge of the work. | Cum | 8007.31 | 8007.31 | 36.29 | False | None | None | False | None | False | 290585.2799 | 0 | | 3681957 | 134918 | None | TUT1137 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support ic fittings & fixtures for tank shall be paid separately -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer in charge of the work. | Ltr | 11.37 | 11.37 | 2000.0 | False | None | None | False | None | False | 22740.0 | 0 | | 3681958 | 134918 | None | TUT1138 | Providing and fixing on wall face unplastilizer rigid pvc rain water pipes to is :13592 type a including jointing with seal ring confirming to is 5382 leaving 10mm gap for thermal expansion single socketed pipes 100mm dia. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Mtr | 367.75 | 367.75 | 90.0 | False | None | None | False | None | False | 33097.5 | 0 | | 3681959 | 134918 | None | TUT1139 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will makehis own arrangements for procuring water for testing) etc.pvc pipes 110mm dia ,6kg/sqcm & class 3 -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Mtr | 519.41 | 519.41 | 75.0 | False | None | None | False | None | False | 38955.75 | 0 | | 3681960 | 134918 | None | TUT1140 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good thewall 25mm nominal dia pipes -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Mtr | 602.82 | 602.82 | 96.0 | False | None | None | False | None | False | 57870.72 | 0 | | 3681961 | 134918 | None | TUT1141 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with
integral type foot rests -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 6172.29 | 6172.29 | 3.0 | False | None | None | False | None | False | 18516.87 | 0 | | 3681962 | 134918 | None | TUT1142 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 7553.61 | 7553.61 | 5.0 | False | None | None | False | None | False | 37768.05 | 0 | | 3681963 | 134918 | None | TUT1143 | Providing and fixing unplasticised PVC connection pipe with brass unions 20 mm nominal bore -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Nos | 139.01 | 139.01 | 15.0 | False | None | None | False | None | False | 2085.15 | 0 | | 3681964 | 134918 | None | TUT1144 | providing and fixing c p brass long bib cock of approved quality confirming standards and weighing not less than 690 g -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Nos | 1069.16 | 1069.16 | 15.0 | False | None | None | False | None | False | 16037.4 | 0 | | 3681965 | 134918 | None | TUT1145 | providing and fixing PTMT pillaer cock approved quality and colour 15mm nominal bore 125 mm long flow standards and weighing not less than 120 g -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Nos | 396.82 | 396.82 | 4.0 | False | None | None | False | None | False | 1587.28 | 0 | | 3681966 | 134918 | None | TUT1146 | providing and fixing PTMT stop cock approved quality and colour 15mm nominal bore flow standards and weighing not less than 85g -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Nos | 209.79 | 209.79 | 16.0 | False | None | None | False | None | False | 3356.64 | 0 | | 3681967 | 134918 | None | TUT1147 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm
C.P. brass pillar taps -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 3894.96 | 3894.96 | 4.0 | False | None | None | False | None | False | 15579.84 | 0 | | 3681968 | 134918 | None | TUT1148 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 1541.81 | 1541.81 | 4.0 | False | None | None | False | None | False | 6167.24 | 0 | | 3681969 | 134918 | None | TUT1149 | Providing and fixing P.V.C. waste pipe for sink or wash basin including p v c waste fittings compete semi rigid pipe 40mm dia -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 111.21 | 111.21 | 7.0 | False | None | None | False | None | False | 778.47 | 0 | | 3681970 | 134918 | None | TUT1150 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet and 75 mm outlet -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 600.3 | 600.3 | 28.0 | False | None | None | False | None | False | 16808.4 | 0 | | 3681971 | 134918 | None | TUT1151 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Nos | 1284.0 | 1284.0 | 16.0 | False | None | None | False | None | False | 20544.0 | 0 | | 3681972 | 134918 | None | TUT1152 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Mtr | 401.88 | 401.88 | 80.0 | False | None | None | False | None | False | 32150.4 | 0 | | 3681973 | 134918 | None | TUT1153 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. do -with both side prelam -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 2990.1 | 2990.1 | 25.2 | False | None | None | False | None | False | 75350.52 | 0 | | 3681974 | 134918 | None | TUT1154 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 211.05 | 211.05 | 227.52 | False | None | None | False | None | False | 48018.096 | 0 | | 3681975 | 134918 | None | TUT1155 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 5659.2 | 5659.2 | 2.4 | False | None | None | False | None | False | 13582.08 | 0 | | 3681976 | 134918 | None | TUT1156 | KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS ---- etc., complete with all lead -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Mtr | 41.7 | 41.7 | 321.2 | False | None | None | False | None | False | 13394.04 | 0 | | 3681977 | 134918 | None | TUT1157 | Providing and fixing suitable plaster mesh 150 mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120 gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. (length of mesh only be measured for payment -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Mtr | 48.02 | 48.02 | 940.8 | False | None | None | False | None | False | 45177.216 | 0 | | 3681978 | 134918 | None | TUT1158 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 264.13 | 264.13 | 921.71 | False | None | None | False | None | False | 243451.2623 | 0 | | 3681979 | 134918 | None | TUT1159 | Supplying and fixing new teak wood beads wherever necessaryincluding cost of materials, labour, complete as per specifications. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Mtr | 65.71 | 65.71 | 24.48 | False | None | None | False | None | False | 1608.5808 | 0 | | 3681980 | 134918 | None | TUT1160 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 66.97 | 66.97 | 3117.88 | False | None | None | False | None | False | 208804.4236 | 0 | | 3681981 | 134918 | None | TUT1161 | 6 mm thick High performance glass -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 1263.78 | 1263.78 | 4.5 | False | None | None | False | None | False | 5687.01 | 0 | | 3681982 | 134918 | None | TUT1162 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Cum | 2549.04 | 2549.04 | 31.36 | False | None | None | False | None | False | 79937.8944 | 0 | | 3681983 | 134918 | None | TUT1163 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc completeFastener with threaded dia 12 mm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 75.82 | 75.82 | 200.0 | False | None | None | False | None | False | 15164.0 | 0 | | 3681984 | 134918 | None | TUT1164 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Nos | 755.74 | 755.74 | 4.0 | False | None | None | False | None | False | 3022.96 | 0 | | 3681985 | 134918 | None | TUT1165 | Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) brick -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 408.19 | 408.19 | 40.0 | False | None | None | False | None | False | 16327.6 | 0 | | 3681986 | 134918 | None | TUT1166 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.150 mm clamp -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Kg | 2354.41 | 2354.41 | 50.0 | False | None | None | False | None | False | 117720.5 | 0 | | 3681987 | 134918 | None | TUT1167 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. 125mm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 307.09 | 307.09 | 208.0 | False | None | None | False | None | False | 63874.72 | 0 | | 3681988 | 134918 | None | TUT1168 | Providing and fixing bright finished brass handles with screws etc. completeBrass handles 125 mm with plate 175x32 mm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 314.68 | 314.68 | 60.0 | False | None | None | False | None | False | 18880.8 | 0 | | 3681989 | 134918 | None | TUT1169 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 250x10mm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 549.75 | 549.75 | 28.0 | False | None | None | False | None | False | 15393.0 | 0 | | 3681990 | 134918 | None | TUT1170 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 150x10mm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 365.23 | 365.23 | 16.0 | False | None | None | False | None | False | 5843.68 | 0 | | 3681991 | 134918 | None | TUT1171 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complet -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 298.25 | 298.25 | 14.0 | False | None | None | False | None | False | 4175.5 | 0 | | 3681992 | 134918 | None | TUT1172 | Providing and fixing bright finished brass flush bolts with necessary brass screws etc. complete 250mm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 309.63 | 309.63 | 30.0 | False | None | None | False | None | False | 9288.9 | 0 | | 3681993 | 134918 | None | TUT1173 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 10921.58 | 10921.58 | 6.0 | False | None | None | False | None | False | 65529.48 | 0 | | 3681994 | 134918 | None | TUT1174 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Kg | 185.77 | 185.77 | 300.0 | False | None | None | False | None | False | 55731.0 | 0 | | 3681995 | 134918 | None | TUT1175 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 ) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Sqm | 717.82 | 717.82 | 24.0 | False | None | None | False | None | False | 17227.68 | 0 | | 3681996 | 134918 | None | TUT1176 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... dia ...... thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire wherever necessary. - 19/20mmdia 2mm thick -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Mtr | 77.88 | 77.88 | 155.0 | False | None | None | False | None | False | 12071.4 | 0 | | 3681997 | 134918 | None | TUT1177 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... dia ...... thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire wherever necessary. - 25mm dia 2mm thick -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Mtr | 92.03 | 92.03 | 520.0 | False | None | None | False | None | False | 47855.6 | 0 | | 3681998 | 134918 | None | TUT1178 | Supplying heavy gauge PVC Conduit pipe ….dia ..... mm thick with bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. - 19/20mmdia 2mm thick -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Mtr | 80.24 | 80.24 | 55.0 | False | None | None | False | None | False | 4413.2 | 0 | | 3681999 | 134918 | None | TUT1179 | Supplying heavy gauge PVC Conduit pipe ….dia ..... mm thick with bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary -25mm dia 2mm thick(1.3.2) -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Mtr | 93.22 | 93.22 | 240.0 | False | None | None | False | None | False | 22372.8 | 0 | | 3682000 | 134918 | None | TUT1180 | Supplying and wiring adopting loop system in existing PVC conduit/casing capping using 2x1.5 Sqmm(Phase & Neutral) & 1x 1.0 sqmm(Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wire shall be terminated with sufficient length in a wood/PVC round block, complete for each outlet. - Short point up to 3Mtr from tapping point to out let via switch box -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Point | 317.42 | 317.42 | 24.0 | False | None | None | False | None | False | 7618.08 | 0 | | 3682001 | 134918 | None | TUT1181 | Supplying and wiring adopting loop system in existing PVC conduit/casing capping using 2x1.5 Sqmm(Phase & Neutral) & 1x 1.0 sqmm(Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wire shall be terminated with sufficient length in a wood/PVC round block, complete for each outlet. - Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Point | 447.22 | 447.22 | 36.0 | False | None | None | False | None | False | 16099.92 | 0 | | 3682002 | 134918 | None | TUT1182 | Supplying and wiring adopting loop system in existing PVC conduit/casing capping using 2x1.5 Sqmm(Phase & Neutral) & 1x 1.0 sqmm(Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wire shall be terminated with sufficient length in a wood/PVC round block, complete for each outlet. - Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Point | 654.9 | 654.9 | 56.0 | False | None | None | False | None | False | 36674.4 | 0 | | 3682003 | 134918 | None | TUT1183 | Supplying and flush mounting Powder coated metal box suitable for mounting modular switch plates, the box sould be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. - 1-2 Way -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 162.84 | 162.84 | 6.0 | False | None | None | False | None | False | 977.04 | 0 | | 3682004 | 134918 | None | TUT1184 | Supplying and flush mounting Powder coated metal box suitable for mounting modular switch plates, the box sould be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. - 6 Way -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 259.6 | 259.6 | 3.0 | False | None | None | False | None | False | 778.8 | 0 | | 3682005 | 134918 | None | TUT1185 | Supplying and flush mounting Powder coated metal box suitable for mounting modular switch plates, the box sould be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. - 8 Way -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 307.98 | 307.98 | 106.0 | False | None | None | False | None | False | 32645.88 | 0 | | 3682006 | 134918 | None | TUT1186 | Supplying and flush mounting Powder coated metal box suitable for mounting modular switch plates, the box sould be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. - 10-12 Way -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 376.42 | 376.42 | 4.0 | False | None | None | False | None | False | 1505.68 | 0 | | 3682007 | 134918 | None | TUT1187 | Supplying and flush mounting Powder coated metal box suitable for mounting modular switch plates, the box sould be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. - 18 Way -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 477.9 | 477.9 | 13.0 | False | None | None | False | None | False | 6212.7 | 0 | | 3682008 | 134918 | None | TUT1188 | Supplying and fixing superior quality modular switch mounting polycorbonate plate with neccesary supporting back plate with rqures nos. of machine screwes, bolts etc..complete on the existing metal/PVC box. - 1-2 Module -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 161.66 | 161.66 | 6.0 | False | None | None | False | None | False | 969.96 | 0 | | 3682009 | 134918 | None | TUT1189 | Supplying and fixing superior quality modular switch mounting polycorbonate plate with neccesary supporting back plate with rqures nos. of machine screwes, bolts etc..complete on the existing metal/PVC box. - 6 Module -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 276.12 | 276.12 | 3.0 | False | None | None | False | None | False | 828.36 | 0 | | 3682010 | 134918 | None | TUT1190 | Supplying and fixing superior quality modular switch mounting polycorbonate plate with neccesary supporting back plate with rqures nos. of machine screwes, bolts etc..complete on the existing metal/PVC box. - 8 Module -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 335.12 | 335.12 | 106.0 | False | None | None | False | None | False | 35522.72 | 0 | | 3682011 | 134918 | None | TUT1191 | Supplying and fixing superior quality modular switch mounting polycorbonate plate with neccesary supporting back plate with rqures nos. of machine screwes, bolts etc..complete on the existing metal/PVC box. - 10-12 Module -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 405.92 | 405.92 | 4.0 | False | None | None | False | None | False | 1623.68 | 0 | | 3682012 | 134918 | None | TUT1192 | Supplying and fixing superior quality modular switch mounting polycorbonate plate with neccesary supporting back plate with rqures nos. of machine screwes, bolts etc..complete on the existing metal/PVC box. - 18 Module -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 539.26 | 539.26 | 13.0 | False | None | None | False | None | False | 7010.38 | 0 | | 3682013 | 134918 | None | TUT1193 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - 6A One Way Switch -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 120.36 | 120.36 | 335.0 | False | None | None | False | None | False | 40320.6 | 0 | | 3682014 | 134918 | None | TUT1194 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - 6A Two Way Switch -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 195.88 | 195.88 | 2.0 | False | None | None | False | None | False | 391.76 | 0 | | 3682015 | 134918 | None | TUT1195 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - 6A Three Way Socket -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 191.16 | 191.16 | 325.0 | False | None | None | False | None | False | 62127.0 | 0 | | 3682016 | 134918 | None | TUT1196 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - Stepped Fan Regulator Two Module -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 421.26 | 421.26 | 28.0 | False | None | None | False | None | False | 11795.28 | 0 | | 3682017 | 134918 | None | TUT1197 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - TV/Telephone socket -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 184.07 | 184.07 | 1.0 | False | None | None | False | None | False | 184.07 | 0 | | 3682018 | 134918 | None | TUT1198 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - RJ45/I.O.Outlet cat 6 -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 397.65 | 397.65 | 5.0 | False | None | None | False | None | False | 1988.25 | 0 | | 3682019 | 134918 | None | TUT1199 | Supplying And Fixing Metal Fan Box with Round Hook. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 138.06 | 138.06 | 28.0 | False | None | None | False | None | False | 3865.68 | 0 | | 3682020 | 134918 | None | TUT1200 | Extra for supplying 4mm thick white plastic plate and covering for junction boxes or size 80 mm conduit using necessary machine sgrews. 80/90 mm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | No. | 17.7 | 17.7 | 50.0 | False | None | None | False | None | False | 885.0 | 0 | | 3682021 | 134918 | None | TUT1201 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper wire with low conductor reistance single core cable in open or concealed system of wiring with specified IS-694: confirming to latest amendments. - 1sqmm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | m | 22.42 | 22.42 | 980.0 | False | None | None | False | None | False | 21971.6 | 0 | | 3682022 | 134918 | None | TUT1202 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper wire with low conductor reistance single core cable in open or concealed system of wiring with specified IS-694: confirming to latest amendments. - 1.5sqmm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | m | 30.68 | 30.68 | 570.0 | False | None | None | False | None | False | 17487.6 | 0 | | 3682023 | 134918 | None | TUT1203 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper wire with low conductor reistance single core cable in open or concealed system of wiring with specified IS-694: confirming to latest amendments. - 2.5sqmm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | m | 49.56 | 49.56 | 2350.0 | False | None | None | False | None | False | 116466.0 | 0 | | 3682024 | 134918 | None | TUT1204 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper wire with low conductor reistance single core cable in open or concealed system of wiring with specified IS-694: confirming to latest amendments. - 4sqmm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | m | 74.34 | 74.34 | 850.0 | False | None | None | False | None | False | 63189.0 | 0 | | 3682025 | 134918 | None | TUT1205 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper wire with low conductor reistance single core cable in open or concealed system of wiring with specified IS-694: confirming to latest amendments. - 6sqmm -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | m | 108.56 | 108.56 | 90.0 | False | None | None | False | None | False | 9770.4 | 0 | | 3682026 | 134918 | None | TUT1206 | Supplying of 4 feet PVC Batten with integrated LED tube 20/22 watts with high quakity diffuser with Lite of 25000 burning hours & 70% lumen maintanance with CRI 80 Power input: 220-240V 50/60 Hz & Power factor 0.9 along with CE approved. 2 years warranty against any manufacturing detect working under standered electrical condition - LED light fitting 1 x 2' - 9/10 W -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 650.18 | 650.18 | 8.0 | False | None | None | False | None | False | 5201.44 | 0 | | 3682027 | 134918 | None | TUT1207 | Supplying of 4 feet PVC Batten with integrated LED tube 20/22 watts with high quakity diffuser with Lite of 25000 burning hours & 70 lumen maintanance with CRI 80 Power input: 220 240V 50/60 Hz Power factor 0.9 along with CE approved. 2 years warranty against any manufacturing detect working under standered electrical condition - LED light fitting 1x4'-20/22w -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 814.2 | 814.2 | 70.0 | False | None | None | False | None | False | 56994.0 | 0 | | 3682028 | 134918 | None | TUT1208 | Fixing all type and all capacities of fluorescent/false ceiling /spot light CFL fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076"twin twisted PVC insulated wires,required Nos of round block and clamps. - On wall/ceiling/Rafter/Girders -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 143.96 | 143.96 | 78.0 | False | None | None | False | None | False | 11228.88 | 0 | | 3682029 | 134918 | None | TUT1209 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal dissipation. Lamp compartment comprising of anti glare diffuser with injection moulded polycarbonate material, delivering superior light output. Rated life burning Hrs 50000 hr Lumen maintenance of 70 maximum light intensity should be between 60 degrees to 70 degrees CCT 55 DDK,up 66 optical and electrical compartment and impact resistance of complete luminaire KDB.power Factor 0.9 with mains surge protection -Min 5kv along with over voltage overload short circuit miss wiring protection. Compatible for pole mouting with dia of 40mm to 50mm.universal voltage driver to operate wide voltage range from 100V to 270V 50/50 Hz application . compallance to IS 10322 EC 65598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB Top access street light single screw to ensure ease of maintenance at the sight location with minimized minimal tools. LED light fixture with....... W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75 Luminiare manufactured should have in-house facility accredited by NABL/CRPI & any Governament certified agency & design & Development facility certified by ISO 9008-2008. Housing with supplier word mark/ name shall be engaged / Embossing on the die cast housing / body part. Warranty of 2 years against any manufacturing detect working under standard electrical conditions as mentioned above should be given by LED manufacturer & CRee/Nichial/Lumileds/Osram make LED source. - LED Streetlight 40 W -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 4748.32 | 4748.32 | 5.0 | False | None | None | False | None | False | 23741.6 | 0 | | 3682030 | 134918 | None | TUT1210 | Supplying & fixing of........mm dia class A G1 pipe bracket upto 2 mtrs long bent at suitable angle and fixing to this bracket street light fitting of all capacities to G1 or C1 or rail or RCC pole/Wall using suitable clamps,bolts, and nuts and wiring using suitable capacity wires complete. - Using 25mm dia G1 pipe -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 1154.04 | 1154.04 | 5.0 | False | None | None | False | None | False | 5770.2 | 0 | | 3682031 | 134918 | None | TUT1211 | Supplying Capacitor type ceiling fan complete With down rod blades, shackle,canopies etc..for operation on 230 volts,50 cycles. Single phase AC supply Conforming to ISS-374-1979 and with double ball bearing system - 48"Sweep(1200mm) Regular Model -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 3521.12 | 3521.12 | 28.0 | False | None | None | False | None | False | 98591.36 | 0 | | 3682032 | 134918 | None | TUT1212 | Supplying of 1440 RPM heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz,AC Supply complete. - 12" Sweep(300 mm) -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 3503.42 | 3503.42 | 4.0 | False | None | None | False | None | False | 14013.68 | 0 | | 3682033 | 134918 | None | TUT1213 | Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing a 5 ampers ceiling rose,necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire of approved quality, mounted on a suitable size wooden board and wired. -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 201.78 | 201.78 | 28.0 | False | None | None | False | None | False | 5649.84 | 0 | | 3682034 | 134918 | None | TUT1214 | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 580.56 | 580.56 | 4.0 | False | None | None | False | None | False | 2322.24 | 0 | | 3682035 | 134918 | None | TUT1215 | Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts,bolts and washers etc,, complete. - 100Amps -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 815.38 | 815.38 | 3.0 | False | None | None | False | None | False | 2446.14 | 0 | | 3682036 | 134918 | None | TUT1216 | Supplying and fixing regular MCB distribution boards on wall/woodboard/flush mounting using required clamps. Bolts,nuts etc..with provision for fixing suitable type capacity MCB's single phase /3 phase/single door with power coated painting. Made out of 14 SWG M.S.enclosure - 1-Single Door 16 Way SP & N DB -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 3459.76 | 3459.76 | 1.0 | False | None | None | False | None | False | 3459.76 | 0 | | 3682037 | 134918 | None | TUT1217 | Supplying and fixing miniature circult breakers on existing MCB disribution boards using necessary fixing materials and "C' Type curve, indicator ON/OFF, energy Cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. Confirming to IEC 60898. - 6-32 Amps DP -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 872.02 | 872.02 | 5.0 | False | None | None | False | None | False | 4360.1 | 0 | | 3682038 | 134918 | None | TUT1218 | Supplying and fixing miniature circult breakers on existing MCB disribution boards using necessary fixing materials and "C' Type curve, indicator ON/OFF, energy Cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. Confirming to IEC 60898. - 50-63 Amps TPN -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 3643.84 | 3643.84 | 4.0 | False | None | None | False | None | False | 14575.36 | 0 | | 3682039 | 134918 | None | TUT1219 | Supplying, fixing and wiring Earth Residual Current circuit breaker (RCCB)240/450V up to 300MA sensitivity on exisiting wood/panel board. - 63 Amps 4 pole -complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. | Each | 6543.1 | 6543.1 | 1.0 | False | None | None | False | None | False | 6543.1 | 0 |
|