createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1722663416131 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 5125.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 19-08-2024 17:00:00 tenderQueryClose 16-08-2024 12:00:00 technicalBidOpen None publishedDate 03-08-2024 12:03:59 publishedByPost CMC_MCOM_HAR publishedByUser KPE16169 - SUBRAMANYA SETTY P bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Thippeshappa G T splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08192242565 mobileNumber 9606561752 tenderSupplierList None
tenderSchedule	createdTs 1722663416169 version 4 createdDate None modifiedDate None tenderNumber DMA/2024-25/OW/WORK_INDENT23708 title Construction of Physically Handicapped griendly toilet in Govt Collage Harihara. description Construction of Physically Handicapped griendly toilet in Govt Collage Harihara. category WORKS categoryText Works ecv 205000.00 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2293 locationName DMA City Municipal Council Harihara provisionalAmount 205000.0 groupOverheadTotal 31911.49 fileNumber CMC/HRR/2023-24/SFC5
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1722663416000 0 None None Other Works Construction of Physically Handicapped griendly toilet in Govt Collage Harihara. 173088.51 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3678797 134736 None code01 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter,excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work[Valumme-I PNO-5,INO-1.4.1 Of 2023-24 PWD SR] Cum 369.77 369.77 1.964 False None None False None False 726.22828 0 3678798 134736 None code02 Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications.[Valumme-I PNO-5,INO-1.4.1 Of 2023-24 PWD SR] Cum 369.77 369.77 3.9749 False None None False None False 1469.798773 0 3678799 134736 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork sh+B20all be paid separately) 1:4:8 Using 40 mm and down size graded crushed coarse aggregates (Page No.15, Item.No 2.1.1 Vol-1) Cum 5833.92 5833.92 0.804 False None None False None False 4690.47168 0 3678800 134736 None code04 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand))[Volumme-II,PNO-9, INO-5.4Of PWD SR For 2023-24] Cum 6580.67 6580.67 0.729 False None None False None False 4797.30843 0 3678801 134736 None code05 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand))[Vol-II,PNO-9, INO-5.4Of PWD SR For 2023-24] Cum 6816.54 6816.54 0.486 False None None False None False 3312.83844 0 3678802 134736 None code06 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.[S.R.page 7 Item Nos 1.11 (Volume-1] Cum 445.99 445.99 4.7924 False None None False None False 2137.362476 0 3678803 134736 None code07 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. [Volume -i P No.-15, I No -2.16.PWD SR 2023-24 Common Shedule of Rates] Cum 6430.29 6430.29 1.073 False None None False None False 6899.70117 0 3678804 134736 None code08 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(Page No.17, Item.No -6.32 Vol-2) Sqm 1349.3 1349.3 15.065 False None None False None False 20327.2045 0 3678805 134736 None code09 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or roundbars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding[S.R.page No.86, Item 11.34 A (Volume-2] Sqm 188.49 188.49 8.505 False None None False None False 1603.10745 0 3678806 134736 None code10 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge.[S.R.page No.77, Item 11.5.1 (Volume-2] Sqm 4612.34 4612.34 2.52 False None None False None False 11623.0968 0 3678807 134736 None code11 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.s[Volumme-II,PNO-105, INO-12.51 Of PWD SR For 2023-24] Nos 1046.48 1046.48 1.0 False None None False None False 1046.48 0 3678808 134736 None code12 Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.[Volumme-II,PNO-105, INO-12.52 Of PWD SR For 2023-24] Nos 796.19 796.19 1.0 False None None False None False 796.19 0 3678809 134736 None code13 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as Charge.[SR Page No-77, Item No- 11.2(Volume-2] Sqm 116.39 116.39 7.8403 False None None False None False 912.532517 0 3678810 134736 None code14 Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.0.63 mm thick with zinc coating not less than 275 g/ m²[S.R Page no 21, item no 7.1.1 (V-II)] Sqm 905.37 905.37 4.2749 False None None False None False 3870.366213 0 3678811 134736 None code15 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge.[Volumme-II,PNO-84, INO-11.26.3 Of PWD SR For 2023-24]-25.00Kg/Sqm Sqm 188.49 188.49 168.0 False None None False None False 31666.32 0 3678812 134736 None code16 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.[S.R Page no 42, item no 8.5.2 (V-II] Sqm 359.47 359.47 4.32 False None None False None False 1552.9104 0 3678813 134736 None code17 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.[S.R Page no 42, item no 8.5.1 (V-II] Sqm 376.98 376.98 23.939 False None None False None False 9024.52422 0 3678814 134736 None code18 Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.,item no 8.51 & 8.55.2 (Volume-2-PNO-44,INO-8.21] Sqm 26.78 26.78 10.0349 False None None False None False 268.734622 0 3678815 134736 None code19 Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1 mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000 mm VENTILATOR Sqm 5890.57 5890.57 0.81 False None None False None False 4771.3617 0 3678816 134736 None code20 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 1000x1000 mm[S.R Page no 61, Item no 9.17.4 (V-II)] Sqm 1919.92 1919.92 10.74 False None None False None False 20619.9408 0 3678817 134736 None code21 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.[S.R.page No-65, Item No- 9.39 (V-II] m 1492.47 1492.47 4.32 False None None False None False 6447.4704 0 3678818 134736 None code22 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid[SR page no-131, Item No-14.2.1 (Volume-2)] Nos 4983.14 4983.14 1.0 False None None False None False 4983.14 0 3678819 134736 None code23 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.[SR page no-136, Item No-14.31 (Volume-2)] Nos 1256.6 1256.6 1.0 False None None False None False 1256.6 0 3678820 134736 None code24 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with Total Rate length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.[SR page no-137, Item No-14.40.2 (Volume-2)] Nos 510.88 510.88 1.0 False None None False None False 510.88 0 3678821 134736 None code25 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g[SR page no-121, Item No-13.24 (Volume-2) Nos 170.98 170.98 2.0 False None None False None False 341.96 0 3678822 134736 None code26 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, 15 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Volumme-II,PNO-123, INO-13.34 Of PWD SR For 2023-24] Ltr 9.27 9.27 1000.0 False None None False None False 9270.0 0 3678823 134736 None code27 Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete.(External work and Burried).[Page No-122 & 123,Item No-13.33.3 , 13.33.4 & 13.33.5 (Volume-2)] m 304.88 304.88 7.0 False None None False None False 2134.16 0 3678824 134736 None code28 Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete.(External work and Burried).[Page No-122 & 123,Item No-13.33.3 , 13.33.4 & 13.33.5 (Volume-2)] m 318.27 318.27 7.0 False None None False None False 2227.89 0 3678825 134736 None code29 Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete.(Concealed work including cutting chasing and good the walls etc).[Page No-122,Item No-13.32.1 , 13.32.2 & 13.32.3 (Volume-2)] m 383.16 383.16 15.0 False None None False None False 5747.4 0 3678826 134736 None code30 Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete.(Concealed work including cutting chasing and good the walls etc).[Page No-122,Item No-13.32.1 , 13.32.2 & 13.32.3 (Volume-2)] m 390.37 390.37 15.0 False None None False None False 5855.55 0 3678827 134736 None code31 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :[Page No-117,Item No-13.53 (Volume-2)] Nos 341.96 341.96 2.0 False None None False None False 683.92 0 3678828 134736 None code32 Providing and fixing in position below given nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments specification.[Page No-118,Item No-13.6.3.2 (Volume-2)] Nos 1261.75 1261.75 1.0 False None None False None False 1261.75 0 3678829 134736 None code33 Providing and fixing PTMT grating of approved quality and colour. [Page No-120,Item No-13.22.1.2 (Volume-2)] Nos 45.32 45.32 2.0 False None None False None False 90.64 0 3678830 134736 None code34 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge.[Page No-201,Item No-20.40 (Volume-2)] Nos 80.34 80.34 2.0 False None None False None False 160.68 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1722663417000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1722663417000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1722663417000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1722663417000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1722663417000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1722663417000 0 None None ELIGIBILITY Department Registration Details None 1722663417000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1722663417000 0 None None ELIGIBILITY List of existing commitments and ongoing work None 1722663417000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1722663417000 0 None None ELIGIBILITY Banker Details None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid PWD valid Registration Certificate True Technical Bid GST and PAN card True Technical Bid Similar nature of work Done certificate fifty percent on estimate cost True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None