createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1722857901293 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 1500000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 05-09-2024 16:00:00 tenderQueryClose 05-09-2024 14:00:00 technicalBidOpen 09-09-2024 16:00:00 publishedDate 05-08-2024 17:43:05 publishedByPost KRIDL_CEBBMP_HOD publishedByUser KPE10633 - K MAHESHA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 26-08-2024 12:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Kiran Kumar HR splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 9380134784 mobileNumber 9972959899 tenderSupplierList None
tenderSchedule	createdTs 1722857901322 version 6 createdDate None modifiedDate None tenderNumber KRIDL/2024-25/BD/WORK_INDENT3 title Construction of Anti-Venom Research & Development Centre (AVRDC) at IBAB Campus, Helix Bio Tech Park, Electronics City Phase-1, Bengaluru- 560 100 description Construction of Anti-Venom Research & Development Centre (AVRDC) at IBAB Campus, Helix Bio Tech Park, Electronics City Phase-1, Bengaluru- 560 100 category WORKS categoryText Works ecv 92750656.20 deptName Karnataka Rural Infrastructure Development Limited status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2527 locationName KRIDL Managing Director Office Bengaluru provisionalAmount 99600000.0 groupOverheadTotal None fileNumber KRIDL/WKS/IBAB/TND/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1722857901000 0 None None Buildings Construction of Anti-Venom Research & Development Centre (AVRDC) at IBAB Campus, Helix Bio Tech Park, Electronics City Phase-1, Bengaluru- 560 100 92750656.2 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3694815 135842 None Code1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the elected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.- In all kinds of soils Depth upto 1.5 m 1.4.1-[Vol-1] Cum 314.12 314.12 13.56 False None None False None False 4259.4672 0 3694816 135842 None Code 2 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. --In all kinds of soils upto 300 mm depth 1.12-[Vol-1] Cum 123.31 123.31 525.0 False None None False None False 64737.75 0 3694817 135842 None Code3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. -In all kinds of soils Depth upto 3 m 1.14.1-[Vol-1] Cum 132.4 132.4 2111.74 False None None False None False 279594.376 0 3694818 135842 None Code4 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work- n all kinds of soils --In ordinary/soft rock without blasting upto 1.5 m depth 1.15.1-[Vol-1] Cum 471.17 471.17 36.46 False None None False None False 17178.8582 0 3694819 135842 None Code5 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.-Depth exceeding 1.5m, but not exceeding 3 m 1.5.2-[Vol-1] Cum 577.61 577.61 18.2 False None None False None False 10512.502 0 3694820 135842 None Code6 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. --In ordinary/soft rock without blasting Depth exceeding 1.5 m, but not exceeding 3 m 1.15.2-[Vol-1] Cum 551.65 551.65 616.8 False None None False None False 340257.72 0 3694821 135842 None Code7 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. - In all kinds of soils - Depth exceeding 1.5m, but not exceeding 3 m 1.4.2-[Vol-1] Cum 336.18 336.18 308.4 False None None False None False 103677.912 0 3694822 135842 None Code8 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20Percentage E.C. / Lindane 20Percentage E.C. at the rate 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 4.1-[Vol-2] Sqm 153.16 153.16 1106.0 False None None False None False 169394.96 0 3694823 135842 None Code9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 1.9-[Vol-1] Cum 345.27 345.27 1898.32 False None None False None False 655432.9464 0 3694824 135842 None Code10 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 1.8-[Vol-1] Cum 615.25 615.25 474.58 False None None False None False 291985.345 0 3694825 135842 None Code11 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum. (Tipper 10 m3)- Taking output 10 t load and lead 10 km = 100 t.km (Unit Cum per T.Km) 1.1b & 1.4(i)a -[Vol-3] Cum 170.04 170.04 1321.76 False None None False None False 224752.0704 0 3694826 135842 None Code12 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.-Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 2.1.3-[Vol-1] Cum 7773.72 7773.72 268.0664 False None None False None False 2083873.135008 0 3694827 135842 None Code13 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. -Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates-- Ground Floor 2.1.4-[Vol-1] Cum 8069.67 8069.67 1.6 False None None False None False 12911.472 0 3694828 135842 None Code14 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. -Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates -- First Floor 2.1.4-[Vol-1] Cum 8150.36 8150.36 1.9 False None None False None False 15485.684 0 3694829 135842 None Code15 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. -Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates- - Second/Terrace Floor 2.1.4-[Vol-1] Cum 8231.06 8231.06 128.391 False None None False None False 1056794.02446 0 3694830 135842 None Code16 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. -M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 2.2.5-[Vol-1] Cum 8435.7 8435.7 1049.6699 False None None False None False 8854700.37543 0 3694831 135842 None Code17 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 2.4.3-[Vol-1] Cum 8224.13 8224.13 28.1264 False None None False None False 231315.170032 0 3694832 135842 None Code18 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 2.4.4-[Vol-1] Cum 8751.12 8751.12 175.8 False None None False None False 1538446.896 0 3694833 135842 None Code19 Ready Mix Concrete (RMC) with Cement & Cementitious Materials. Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at the rate 75Percentage & GGBS at the rate 25Percentage proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.-d. RMC M30 Grade - Ground Floor 2.10d-[Vol-1] Cum 8608.34 8608.34 606.8054 False None None False None False 5223587.197036 0 3694834 135842 None Code20 Ready Mix Concrete (RMC) with Cement & Cementitious Materials. Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at the rate 75Percentage & GGBS at the rate 25Percentage proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.-d. RMC M30 Grade- First Floor 2.10d-[Vol-1] Cum 8694.42 8694.42 605.2981 False None None False None False 5262715.906602 0 3694835 135842 None Code21 Ready Mix Concrete (RMC) with Cement & Cementitious Materials. Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at the rate 75Percentage & GGBS at the rate 25Percentage proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge.-d. RMC M30 Grade - Second / Terrace Floor 2.10d-[Vol-1] Cum 8780.5 8780.5 19.0304 False None None False None False 167096.4272 0 3694836 135842 None Code22 Steel Fabrication -Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.-a. Buildings--GROUND FLOOR 2.11a-[Vol-1] Tonne 116115.19 116115.19 151.0952 False None None False None False 17544447.856088 0 3694837 135842 None Code23 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings -FIRST FLOOR 2.11a-[Vol-1] Tonne 117276.34 117276.34 53.8254 False None None False None False 6312445.911036 0 3694838 135842 None Code24 Steel Fabrication -Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.-a. Buildings -SECOND FLOOR 2.11a-[Vol-1] Tonne 118437.49 118437.49 1.8531 False None None False None False 219476.512719 0 3694839 135842 None Code25 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 5.4-[Vol-2] Cum 8292.92 8292.92 124.6415 False None None False None False 1033641.98818 0 3694840 135842 None Code26 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200 mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications - GROUND FLOOR 6.32-[Vol-2] Sqm 1700.38 1700.38 567.5 False None None False None False 964965.65 0 3694841 135842 None Code27 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200 mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications - FIRST FLOOR 6.32-[Vol-2] Sqm 1717.38 1717.38 347.6 False None None False None False 596961.288 0 3694842 135842 None Code28 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200 mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications - SECOND FLOOR 6.32-[Vol-2] Sqm 1734.39 1734.39 304.1 False None None False None False 527427.999 0 3694843 135842 None Code29 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. -GROUND FLOOR 6.34-[Vol-2] Sqm 1432.99 1432.99 90.6 False None None False None False 129828.894 0 3694844 135842 None Code30 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.--FIRST FLOOR 6.34-[Vol-2] Sqm 1447.32 1447.32 81.7 False None None False None False 118246.044 0 3694845 135842 None Code31 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.-GROUND FLOOR 6.33-[Vol-2] Sqm 1597.84 1597.84 83.3 False None None False None False 133100.072 0 3694846 135842 None Code32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. --FIRST FLOOR 6.33-[Vol-2] Sqm 1613.82 1613.82 29.5 False None None False None False 47607.69 0 3694847 135842 None Code33 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 8.1.1-[Vol-2] Sqm 330.99 330.99 19.5 False None None False None False 6454.305 0 3694848 135842 None Code34 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. External plastering --GROUND FLOOR 8.7-[Vol-2] Sqm 475.07 475.07 1155.0 False None None False None False 548705.85 0 3694849 135842 None Code35 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. External plastering --FIRST FLOOR 8.7-[Vol-2] Sqm 479.82 479.82 762.2 False None None False None False 365718.804 0 3694850 135842 None Code36 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. External plastering --SECOND FLOOR 8.7-[Vol-2] Sqm 484.57 484.57 449.9 False None None False None False 218008.043 0 3694851 135842 None Code37 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. - Internal wall --GROUND FLOOR 8.4.2-[Vol-2] Sqm 404.98 404.98 1471.5 False None None False None False 595928.07 0 3694852 135842 None Code38 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. - Internal wall --FIRST FLOOR 8.4.2-[Vol-2] Sqm 409.03 409.03 1892.3 False None None False None False 774007.469 0 3694853 135842 None Code39 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. - Internal wall --SECOND FLOOR 8.4.2-[Vol-2] Sqm 413.08 413.08 74.0 False None None False None False 30567.92 0 3694854 135842 None Code40 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. - Ceiling --GROUND FLOOR 8.4.1-[Vol-2] Sqm 419.25 419.25 1271.02 False None None False None False 532875.135 0 3694855 135842 None Code41 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. - Ceiling --FIRST FLOOR 8.4.1-[Vol-2] Sqm 423.45 423.45 1479.79 False None None False None False 626617.0755 0 3694856 135842 None Code42 Providing 15 mm cement plaster on the rough side of single or half brick wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. - Rough plastering--GROUND FLOOR 8.2.2-[Vol-2] Sqm 362.14 362.14 174.1 False None None False None False 63048.574 0 3694857 135842 None Code43 Providing 15 mm cement plaster on the rough side of single or half brick wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. - Rough plastering --FIRST FLOOR 8.2.2-[Vol-2] Sqm 365.76 365.76 174.1 False None None False None False 63678.816 0 3694858 135842 None Code44 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge - FIRST FLOOR 8.6.2-[Vol-2] Sqm 562.41 562.41 195.4 False None None False None False 109894.914 0 3694859 135842 None Code45 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge - SECOND FLOOR 8.6.2-[Vol-2] Sqm 567.98 567.98 182.2 False None None False None False 103485.956 0 3694860 135842 None Code46 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-charge. 8.12-[Vol-2] Kgs 83.07 83.07 188.8 False None None False None False 15683.616 0 3694861 135842 None Code47 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. --GROUND FLOOR 8.51-[Vol-2] Sqm 129.8 129.8 2674.45 False None None False None False 347143.61 0 3694862 135842 None Code48 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. --FIRST FLOOR 8.51-[Vol-2] Sqm 131.1 131.1 3372.1 False None None False None False 442082.31 0 3694863 135842 None Code49 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. --SECOND FLOOR 8.51-[Vol-2] Sqm 132.4 132.4 74.0 False None None False None False 9797.6 0 3694864 135842 None Code50 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. --GROUND FLOOR 8.55.2-[Vol-2] Sqm 68.79 68.79 2674.5 False None None False None False 183978.855 0 3694865 135842 None Code51 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. --FIRST FLOOR 8.55.2-[Vol-2] Sqm 69.48 69.48 3372.1 False None None False None False 234293.508 0 3694866 135842 None Code52 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. --TERRACE FLOOR 8.55.2-[Vol-2] Sqm 70.17 70.17 74.0 False None None False None False 5192.58 0 3694867 135842 None Code53 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Ceiling & Walls. --GROUND FLOOR 8.39-[Vol-2] Sqm 164.85 164.85 2674.5 False None None False None False 440891.325 0 3694868 135842 None Code54 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Ceiling & Walls. --FIRST FLOOR 8.39-[Vol-2] Sqm 166.49 166.49 3372.1 False None None False None False 561420.929 0 3694869 135842 None Code55 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Ceiling & Walls. --TERRACE FLOOR 8.39-[Vol-2] Sqm 168.14 168.14 74.0 False None None False None False 12442.36 0 3694870 135842 None Code56 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at the rate 0.90 ltr/10 m² over an under coat of primer applied at the rate0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 8.33.2-[Vol-2] Sqm 179.12 179.12 172.7 False None None False None False 30934.024 0 3694871 135842 None Code57 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at the rate 0.90 ltr/10 m² over an under coat of primer applied at the rate 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 8.33.3-[Vol-2] Sqm 180.42 180.42 130.2 False None None False None False 23490.684 0 3694872 135842 None Code58 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied at the rate 1.43 L/10 m² over and including priming coat of exterior primer applied at the rate 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. -GROUND FLOOR 8.31-[Vol-2] Sqm 231.04 231.04 1103.9 False None None False None False 255045.056 0 3694873 135842 None Code59 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied at the rate 1.43 L/10 m² over and including priming coat of exterior primer applied at the rate 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.--FIRST FLOOR 8.31-[Vol-2] Sqm 233.35 233.35 762.2 False None None False None False 177859.37 0 3694874 135842 None Code60 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied at the rate 1.43 L/10 m² over and including priming coat of exterior primer applied at the rate 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. TERRACE FLOOR 8.31-[Vol-2] Sqm 235.66 235.66 449.9 False None None False None False 106023.434 0 3694875 135842 None Code61 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. 9.29-[Vol-2] Sqm 5589.19 5589.19 81.0 False None None False None False 452724.39 0 3694876 135842 None Code62 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. --GROUND FLOOR 9.11-[Vol-2] Sqm 1153.92 1153.92 56.8 False None None False None False 65542.656 0 3694877 135842 None Code63 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. -FIRST FLOOR 9.11-[Vol-2] Sqm 1165.46 1165.46 57.2 False None None False None False 66664.312 0 3694878 135842 None Code64 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. --GROUND FLOOR 9.39-[Vol-2] Sqm 1880.8 1880.8 212.9 False None None False None False 400422.32 0 3694879 135842 None Code65 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. -FIRST FLOOR 9.39-[Vol-2] Sqm 1899.61 1899.61 203.0 False None None False None False 385620.83 0 3694880 135842 None Code66 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. -GROUND FLOOR 9.24-[Vol-2] Sqm 3701.9 3701.9 176.8 False None None False None False 654495.92 0 3694881 135842 None Code67 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. -FIRST FLOOR 9.24-[Vol-2] Sqm 3738.91 3738.91 168.7 False None None False None False 630754.117 0 3694882 135842 None Code68 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.--GROUND FLOOR 9.30-[Vol-2] Sqm 6915.74 6915.74 92.4 False None None False None False 639014.376 0 3694883 135842 None Code69 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. -FIRST FLOOR 9.30-[Vol-2] Sqm 6984.9 6984.9 58.32 False None None False None False 407359.368 0 3694884 135842 None Code70 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels-Area of the slab = 0.50 m2 10.1.1-[Vol-2] Sqm 5199.79 5199.79 1.8 False None None False None False 9359.622 0 3694885 135842 None Code71 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels-Area of slab over 0.50 m2 10.1.2-[Vol-2] Sqm 5110.23 5110.23 66.9 False None None False None False 341874.387 0 3694886 135842 None Code72 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 10.4-[Vol-2] m 767.12 767.12 98.0 False None None False None False 75177.76 0 3694887 135842 None Code73 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. 10.8-[Vol-2] Sqm 3620.12 3620.12 4.8 False None None False None False 17376.576 0 3694888 135842 None Code74 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08Percentage and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm -GROUND FLOOR 9.12.3-[Vol-2] Sqm 1631.59 1631.59 366.3 False None None False None False 597651.417 0 3694889 135842 None Code75 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08Percentage and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm --FIRST FLOOR 9.12.3-[Vol-2] Sqm 1647.9 1647.9 374.5 False None None False None False 617138.55 0 3694890 135842 None Code76 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08Percentage and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 1000x1000 mm --GROUND FLOOR 9.12.4-[Vol-2] Sqm 2380.53 2380.53 160.5 False None None False None False 382075.065 0 3694891 135842 None Code77 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. 9.1-[Vol-2] Sqm 591.25 591.25 170.8 False None None False None False 100985.5 0 3694892 135842 None Code78 Providing and laying 5mm thick Self levelling Epoxy Flooring for Residential, Commercial, Sports & Industrial purpose made of reputed brand applied at 1L/m2 on existing Concrete substrate of 25Mpa or more. The Concrete shall be free from any defects and cracks. The epoxy compound shall have low VOC (Based on USEPA Method 24 Section 11.2.2 & ASTM D2369-98) and is chemically resistant & antimicrobial. The surface of Concrete shall be cleaned thoroughly and free from laitance and applied with primer cured for 6-8 hours. The mix shall be mixed using Hand mixing rotary machine.The underlay shall be laid with 3mm thickness and overlay at 2mm. The entire operation shall be finished in line with epoxy coving and marked with 100mm thickness yellow marking lines complete as per the direction of Engineer in charge. 9.41-[Vol-2] Sqm 1895.68 1895.68 170.8 False None None False None False 323782.144 0 3694893 135842 None Code79 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. -FIRST FLOOR 7.18-[Vol-2] Cum 2644.25 2644.25 17.7 False None None False None False 46803.225 0 3694894 135842 None Code80 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications --SECOND FLOOR 7.18-[Vol-2] Cum 2670.43 2670.43 17.8 False None None False None False 47533.654 0 3694895 135842 None Code81 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56Percentage reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64Percentage improvement against control & protecting steel reinforcement against corrosion mixed at the rate 1Percentage by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix at the rate 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) --FIRST FLOOR 15.7-[Vol-2] Sqm 806.25 806.25 55.7 False None None False None False 44908.125 0 3694896 135842 None Code82 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56Percentage reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64Percentage improvement against control & protecting steel reinforcement against corrosion mixed at the rate 1Percentage by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix at the rate 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) -SECOND FLOOR 15.7-[Vol-2] Sqm 814.24 814.24 49.1 False None None False None False 39979.184 0 3694897 135842 None Code83 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at the rate 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at the rate150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. -SECOND FLOOR 15.1-[Vol-2] Sqm 1081.68 1081.68 1106.0 False None None False None False 1196338.08 0 3694898 135842 None Code84 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 11.52-[Vol-2] Sqm 6129.16 6129.16 17.64 False None None False None False 108118.3824 0 3694899 135842 None Code85 Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. 12.10-[Vol-2] (2022-23) Cum 305872.4 305872.4 0.324 False None None False None False 99102.6576 0 3694900 135842 None Code86 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.. -GROUND FLOOR 12.13.1-[Vol-2] Cum 128261.87 128261.87 1.4 False None None False None False 179566.618 0 3694901 135842 None Code87 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. -FIRST FLOOR 12.13.1-[Vol-2] Cum 129544.49 129544.49 0.9 False None None False None False 116590.041 0 3694902 135842 None Code88 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.--do- -do- 35 mm thick Both Side Teak 12.57.4-[Vol-2] Sqm 5882.54 5882.54 10.1 False None None False None False 59413.654 0 3694903 135842 None Code89 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.--do- -do- 35 mm thick one side teak and one side commercial - GROUND FLOOR 12.57.5-[Vol-2] Sqm 5058.31 5058.31 39.4 False None None False None False 199297.414 0 3694904 135842 None Code90 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.--do- -do- 35 mm thick one side teak and one side commercial - FIRST FLOOR 12.57.5-[Vol-2] Sqm 5108.89 5108.89 31.2 False None None False None False 159397.368 0 3694905 135842 None Code91 Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ sqm) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/cum . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded). - GROUND FLOOR P.No.215, I.No.9.161, Vol-1,DSR 2021 m 2113.44 2113.44 24.4 False None None False None False 51567.936 0 3694906 135842 None Code92 Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ sqm) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/cum . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded). - FIRST FLOOR P.No.215, I.No.9.161, Vol-1, DSR 2021 m 2134.57 2134.57 57.6 False None None False None False 122951.232 0 3694907 135842 None Code93 Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge,with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/sqm) duly filled mineral wool insulation having density min 96 kg/cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately) - GROUND FLOOR P.No.215, I.No.9.162, Vol-1, DSR 2021 Sqm 11488.54 11488.54 11.28 False None None False None False 129590.7312 0 3694908 135842 None Code94 Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge,with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/sqm) duly filled mineral wool insulation having density min 96 kg/cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately)-- FIRST FLOOR P.No.215, I.No.9.162, Vol-1, DSR 2021 Sqm 11603.42 11603.42 24.48 False None None False None False 284051.7216 0 3694909 135842 None Code95 Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. -- GROUND FLOOR P.No.216, I.No.9.164, Vol-1, DSR 2021 Sqm 47195.04 47195.04 0.36 False None None False None False 16990.2144 0 3694910 135842 None Code96 Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. -- FIRST FLOOR P.No.216, I.No.9.164, Vol-1, DSR 2021 Sqm 47666.99 47666.99 0.84 False None None False None False 40040.2716 0 3694911 135842 None Code97 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) - GROUND FLOOR 12.93.2-[Vol-2] m 991.67 991.67 11.4 False None None False None False 11305.038 0 3694912 135842 None Code98 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) - FIRST FLOOR 12.93.2-[Vol-2] m 1001.59 1001.59 11.4 False None None False None False 11418.126 0 3694913 135842 None Code99 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) -30 mm thickness - GROUND FLOOR 12.94.1-[Vol-2] Sqm 4523.53 4523.53 3.6 False None None False None False 16284.708 0 3694914 135842 None Code100 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) -30 mm thickness - FIRST FLOOR 12.94.1-[Vol-2] Sqm 4568.77 4568.77 3.6 False None None False None False 16447.572 0 3694915 135842 None Code101 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P s shall not be made) -GROUND FLOOR 12.90-[Vol-2] Sqm 8740.73 8740.73 40.4 False None None False None False 353125.492 0 3694916 135842 None Code102 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass,standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) -FIRST FLOOR 12.90-[Vol-2] Sqm 8828.14 8828.14 38.0 False None None False None False 335469.32 0 3694917 135842 None Code103 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass,standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-TERRACE FLOOR 12.90-[Vol-2] Sqm 8915.55 8915.55 4.1 False None None False None False 36553.755 0 3694918 135842 None Code104 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)--GROUND FLOOR 12.85-[Vol-2] Sqm 7423.26 7423.26 6.09 False None None False None False 45207.6534 0 3694919 135842 None Code105 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) -FIRST FLOOR 12.85-[Vol-2] Sqm 7497.49 7497.49 6.09 False None None False None False 45659.7141 0 3694920 135842 None Code106 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 11.34B-[Vol-2] Kgs 237.53 237.53 1704.2 False None None False None False 404798.626 0 3694921 135842 None Code107 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c)Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d)Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. GROUND FLOOR 18.2-[Vol-2] Sqm 3485.13 3485.13 258.3 False None None False None False 900209.079 0 3694922 135842 None Code108 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c)Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d)Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. FIRST FLOOR 18.2-[Vol-2] Sqm 3519.98 3519.98 258.3 False None None False None False 909210.834 0 3694923 135842 None Code109 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface No 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face No 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face No 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 Percentage, Light reflection internal 10 to 15Percentage, light reflection external 10 to 20 Percentage, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. - GROUND FLOOR 18.3-[Vol-2] Sqm 3949.81 3949.81 103.005 False None None False None False 406850.17905 0 3694924 135842 None Code110 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface No 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face No 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face No 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 Percentage, Light reflection internal 10 to 15Percentage, light reflection external 10 to 20 Percentage, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.- FIRST FLOOR 18.3-[Vol-2] Sqm 3989.31 3989.31 29.6 False None None False None False 118083.576 0 3694925 135842 None Code111 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 11.28-[Vol-2] Kgs 733.37 733.37 727.74 False None None False None False 533702.6838 0 3694926 135842 None Code112 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. 12.51-[Vol-2] Nos 1318.77 1318.77 33.0 False None None False None False 43519.41 0 3694927 135842 None Code113 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) 12.75.1-[Vol-2] Nos 356.95 356.95 93.0 False None None False None False 33196.35 0 3694928 135842 None Code114 Providing and fixing bright finished brass handles with screws etc. complete: -Brass handles 125 mm with plate 175x32 mm 12.79.1-[Vol-2] Nos 323.2 323.2 62.0 False None None False None False 20038.4 0 3694929 135842 None Code115 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 12.60-[Vol-2] Nos 1365.5 1365.5 29.0 False None None False None False 39599.5 0 3694930 135842 None Code116 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :-250x10mm 12.76.1-[Vol-2] Nos 564.63 564.63 70.0 False None None False None False 39524.1 0 3694931 135842 None Code117 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :-150x10mm 12.76.3-[Vol-2] Nos 336.18 336.18 8.0 False None None False None False 2689.44 0 3694932 135842 None Code118 Chromium plated Brass screws 35 mm long P.No.A-18 I.No.229-[Vol-2] Nos 4.54 4.54 660.0 False None None False None False 2996.4 0 3694933 135842 None Code119 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 12.59-[Vol-2] Nos 1445.97 1445.97 29.0 False None None False None False 41933.13 0 3694934 135842 None Code120 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms 12.64-[Vol-2] Nos 71.39 71.39 29.0 False None None False None False 2070.31 0 3694935 135842 None Code121 Supply & installation of Toilet Maridian Partition of brand Classique-Evergreen-Suede-2025 of standard compan / ualit (Thickness 12mm, Door 600X1830,Divider Height 1830, Overall Height 2025, Depth -NA-, Width na) Market rate Each 42480.0 42480.0 14.0 False None None False None False 594720.0 0 3694936 135842 None Code122 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. - GROUND FLOOR 11.15.1-[Vol-2] Kgs 166.14 166.14 107.99 False None None False None False 17941.4586 0 3694937 135842 None Code123 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. -- FIRST FLOOR 11.15.1-[Vol-2] Kgs 167.81 167.81 53.99 False None None False None False 9060.0619 0 3694938 135842 None Code124 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. -TERRACE FLOOR 11.15.1-[Vol-2] Kgs 169.47 169.47 94.5 False None None False None False 16014.915 0 3694939 135842 None Code125 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/m2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws at the rate 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board 7.32.3-[Vol-2] Sqm 1487.51 1487.51 326.7 False None None False None False 485969.517 0 3694940 135842 None Code126 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 Percentage) total coated thickness with zinc coating 120 g/m2 as per IS: 277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineering- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 7.38-[Vol-2] Sqm 737.26 737.26 36.0 False None None False None False 26541.36 0 3694941 135842 None Code127 Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charges of machinery for cutting, welding, grinding and erection equipments, with all lead, transportation, loading and unloading and all other incidental charges etc. complete as per specification and directions of the Engineer in charge of the work. 7.34-[Vol-2] Sqm 4056.25 4056.25 60.0 False None None False None False 243375.0 0 3694942 135842 None Code128 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. 11.25.2-[Vol-2] Kgs 176.53 176.53 3790.9 False None None False None False 669207.577 0 3694943 135842 None Code129 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 14.44-[Vol-2] Each 14568.75 14568.75 18.0 False None None False None False 262237.5 0 3694944 135842 None Code130 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : -Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 14.5.1-[Vol-2] Each 11217.32 11217.32 10.0 False None None False None False 112173.2 0 3694945 135842 None Code131 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: - White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tap 14.7.1-[Vol-2] Each 4000.44 4000.44 14.0 False None None False None False 56006.16 0 3694946 135842 None Code132 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required -Size 600x450x200 mm 14.11.2-[Vol-2] Each 6596.44 6596.44 6.0 False None None False None False 39578.64 0 3694947 135842 None Code133 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 14.31-[Vol-2] Each 1583.56 1583.56 14.0 False None None False None False 22169.84 0 3694948 135842 None Code134 Providing and fixing toilet paper holder : C.P. brass 14.34.1-[Vol-2] Each 789.18 789.18 18.0 False None None False None False 14205.24 0 3694949 135842 None Code135 Providing and fixing Towel rail 450mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Economy 14.88a-[Vol-2] Nos 1403.14 1403.14 14.0 False None None False None False 19643.96 0 3694950 135842 None Code136 Providing and fixing unplasticised PVC connection pipe with brass unions :-45 cm length - 20 mm nominal bore 13.8.2.2-[Vol-2] Nos 142.78 142.78 14.0 False None None False None False 1998.92 0 3694951 135842 None Code137 Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class -Economy 14.85a-[Vol-2] Nos 2266.31 2266.31 14.0 False None None False None False 31728.34 0 3694952 135842 None Code138 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 13.12-[Vol-2] Each 824.23 824.23 8.0 False None None False None False 6593.84 0 3694953 135842 None Code139 Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a) Economy 14.54a-[Vol-2] Nos 1403.14 1403.14 40.0 False None None False None False 56125.6 0 3694954 135842 None Code140 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. - 15 mm nominal bore with 450 mm length 13.27.2-[Vol-2] Nos 150.57 150.57 36.0 False None None False None False 5420.52 0 3694955 135842 None Code141 Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class -Economy 14.60a-[Vol-2] Nos 5172.53 5172.53 2.0 False None None False None False 10345.06 0 3694956 135842 None Code142 Providing and fixing Stainless Steel Grab Bar 600 mm Long with all concealed fitting arrangements & all necessary accesories complete - Class- Economy 14.96a-[Vol-2] Nos 2533.7 2533.7 2.0 False None None False None False 5067.4 0 3694957 135842 None Code143 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: -PVC pipes 63mm dia., 6 kg/sqcm & class 3 10.1.4-[Vol-5] m 208.98 208.98 19.0 False None None False None False 3970.62 0 3694958 135842 None Code144 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 75mm dia., 6 kg/sqcm & class 3 10.1.5-[Vol-5] m 285.56 285.56 46.0 False None None False None False 13135.76 0 3694959 135842 None Code145 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 90mm dia., 6 kg/sqcm & class 3 10.1.6-[Vol-5] m 381.61 381.61 40.0 False None None False None False 15264.4 0 3694960 135842 None Code146 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3 10.1.7-[Vol-5] m 533.48 533.48 190.0 False None None False None False 101361.2 0 3694961 135842 None Code147 Lowering, laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type, with all labour with encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS and commissioning (Contractor will make his own arrangements for procuring water for testing) etc. complete for: 63mm 10.15.4-[Vol-5] m 73.99 73.99 30.0 False None None False None False 2219.7 0 3694962 135842 None Code148 Lowering, laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type, with all labour with encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS and commissioning (Contractor will make his own arrangements for procuring water for testing) etc. complete for: 75mm 10.15.5-[Vol-5] m 98.65 98.65 40.0 False None None False None False 3946.0 0 3694963 135842 None Code149 Lowering, laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type, with all labour with encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS and commissioning (Contractor will make his own arrangements for procuring water for testing) etc. complete for: 90mm 10.15.6-[Vol-5] m 116.82 116.82 40.0 False None None False None False 4672.8 0 3694964 135842 None Code150 Lowering, laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type, with all labour with encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS and commissioning (Contractor will make his own arrangements for procuring water for testing) etc. complete for: 110mm 10.15.7-[Vol-5] m 145.38 145.38 190.0 False None None False None False 27622.2 0 3694965 135842 None Code151 Providing and fixing PTMT grating of approved quality and colour . Circular type -100 mm nominal dia 13.22.1.1-[Vol-2] Each 53.22 53.22 40.0 False None None False None False 2128.8 0 3694966 135842 None Code152 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.A)15mm dia pipe nominal OD pipes 13.32.1-[Vol-2] m 401.08 401.08 16.0 False None None False None False 6417.28 0 3694967 135842 None Code153 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.A) OD pipes 20 mm nominal dia pipes 13.32.2-[Vol-2] m 491.94 491.94 130.0 False None None False None False 63952.2 0 3694968 135842 None Code154 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25mm nominal bore 13.4.1-[Vol-2] Nos 712.6 712.6 4.0 False None None False None False 2850.4 0 3694969 135842 None Code155 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore 13.4.2-[Vol-2] Nos 776.2 776.2 4.0 False None None False None False 3104.8 0 3694970 135842 None Code156 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore 13.4.4-[Vol-2] Nos 1109.79 1109.79 1.0 False None None False None False 1109.79 0 3694971 135842 None Code157 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(1000 litres) 13.34-[Vol-2] Ltr 11.68 11.68 5000.0 False None None False None False 58400.0 0 3694972 135842 None Code158 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 15 mm nominal dia Pipes 13.33.1-[Vol-2] m 215.47 215.47 10.0 False None None False None False 2154.7 0 3694973 135842 None Code159 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 20 mm nominal dia Pipes 13.33.2-[Vol-2] m 281.67 281.67 50.0 False None None False None False 14083.5 0 3694974 135842 None Code160 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 25 mm nominal dia Pipes 13.33.3-[Vol-2] m 384.21 384.21 100.0 False None None False None False 38421.0 0 3694975 135842 None Code161 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 32 mm nominal dia Pipes 13.33.4-[Vol-2] m 482.86 482.86 200.0 False None None False None False 96572.0 0 3694976 135842 None Code162 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 50 mm nominal dia Pipes 13.33.6-[Vol-2] m 935.86 935.86 100.0 False None None False None False 93586.0 0 3694977 135842 None Code163 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 -HDPE Grade PE80-PN6.0,160mm dia 9.1.7-[Vol-5] m 1244.78 1244.78 100.0 False None None False None False 124478.0 0 3694978 135842 None Code164 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 13.38-[Vol-2] Each 3286.54 3286.54 10.0 False None None False None False 32865.4 0 3694979 135842 None Code165 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. 16.9-[Vol-5] Each 7079.29 7079.29 15.0 False None None False None False 106189.35 0 3694980 135842 None Code166 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. 16.10-[Vol-5] Each 5498.33 5498.33 15.0 False None None False None False 82474.95 0 3694981 135842 None Code167 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 17.1-[Vol-2] Cum 1300.6 1300.6 11.304 False None None False None False 14701.9824 0 3694982 135842 None Code168 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 17.2-[Vol-2] Cum 1539.43 1539.43 11.304 False None None False None False 17401.71672 0 3694983 135842 None Code169 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 17.3-[Vol-2] Cum 1547.22 1547.22 11.304 False None None False None False 17489.77488 0 3694984 135842 None Code170 Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 at the rate 6kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. 17.14-[Vol-2] Sqm 1518.66 1518.66 4.0 False None None False None False 6074.64 0 3694985 135842 None Code171 Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5mm2(Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire ( confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short Point up to 3 mtrs from tapping point to outlet via switch 2.1.1, Part III, Vol -6,SR 2023-24 Point 336.3 336.3 80.0 False None None False None False 26904.0 0 3694986 135842 None Code172 Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5mm2(Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire ( confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet.-Medium point above 3m upto 6m from tapping point to out let via switch 2.1.2, Part III, Vol -6,SR 2023-24 Point 464.92 464.92 120.0 False None None False None False 55790.4 0 3694987 135842 None Code173 Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5mm2(Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire ( confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet.- Long point above 6m upto 10m from tapping point to out let via switch 2.1.3, Part III, Vol -6,SR 2023-24 Point 672.6 672.6 120.0 False None None False None False 80712.0 0 3694988 135842 None Code174 Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5mm2(Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire ( confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to outlet via switches 2.1.4, Part III, Vol -6,SR 2023-24 Point 835.44 835.44 20.0 False None None False None False 16708.8 0 3694989 135842 None Code175 Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5mm2(Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire ( confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet-Three outlet in a row, above 6.0M upto 10.0M from tapping point to outlet via switch box 2.1.5, Part III, Vol -6,SR 2023-24 Point 1221.3 1221.3 20.0 False None None False None False 24426.0 0 3694990 135842 None Code176 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall 3 Way 3.4.2, Part III, Vol -6,SR 2023-24 Each 187.62 187.62 90.0 False None None False None False 16885.8 0 3694991 135842 None Code177 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall 6 Way 3.4.4, Part III, Vol -6, SR 2023-24 Each 259.6 259.6 166.0 False None None False None False 43093.6 0 3694992 135842 None Code178 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall 8 Way 3.4.5, Part III, Vol -6, SR 2023-24 Each 307.98 307.98 40.0 False None None False None False 12319.2 0 3694993 135842 None Code179 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall 10-12 Way 3.4.6, Part III, Vol -6, SR 2023-24 Each 376.42 376.42 40.0 False None None False None False 15056.8 0 3694994 135842 None Code180 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-3 Module 3.5.2, Part III, Vol -6, SR 2023-24 Each 189.98 189.98 90.0 False None None False None False 17098.2 0 3694995 135842 None Code181 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 6 Module 3.5.4, Part III, Vol -6, SR 2023-24 Each 276.12 276.12 166.0 False None None False None False 45835.92 0 3694996 135842 None Code182 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. -8 Module 3.5.5, Part III, Vol -6, SR 2023-24 Each 335.12 335.12 40.0 False None None False None False 13404.8 0 3694997 135842 None Code183 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. -10-12 Module 3.5.6, Part III, Vol -6, SR 2023-24 Each 405.92 405.92 40.0 False None None False None False 16236.8 0 3694998 135842 None Code184 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 - a) 6Amps one Way 3.6.1, Part III, Vol -6, SR 2023-24 Each 120.36 120.36 460.0 False None None False None False 55365.6 0 3694999 135842 None Code185 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 - b) 6Amps Two way 3.6.2, Part III, Vol -6, SR 2023-24 Each 195.88 195.88 8.0 False None None False None False 1567.04 0 3695000 135842 None Code186 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 - c) 6Amps 3way socket 3.6.3, Part III, Vol -6, SR 2023-24 Each 201.78 201.78 180.0 False None None False None False 36320.4 0 3695001 135842 None Code187 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 - d) Steeped fan Regulator 3.6.4, Part III, Vol -6, SR 2023-24 Each 421.26 421.26 100.0 False None None False None False 42126.0 0 3695002 135842 None Code188 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 - e) 16Amps one way switch 3.6.7, Part III, Vol -6, SR 2023-24 Each 212.4 212.4 180.0 False None None False None False 38232.0 0 3695003 135842 None Code189 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 - f) 6Amps Bell push 3.6.8, Part III, Vol -6, SR 2023-24 Each 208.86 208.86 16.0 False None None False None False 3341.76 0 3695004 135842 None Code190 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 - g) 6/16Amps universal socket 3.6.10, Part III, Vol -6, SR 2023-24 Each 278.48 278.48 180.0 False None None False None False 50126.4 0 3695005 135842 None Code191 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 - h) TV/Telephone socket 3.6.11, Part III, Vol -6, SR 2023-24 Each 184.08 184.08 16.0 False None None False None False 2945.28 0 3695006 135842 None Code192 Supplying And Fixing Metal Fan Box with Round Hook. 1.13, Part III, Vol -6, SR 2023-24 Nos 138.06 138.06 90.0 False None None False None False 12425.4 0 3695007 135842 None Code193 Supplying and fixing of metal clad socket industrial plugs and sockets Plug And Socket( 3 Pole + Earth 440V PLUG ) 32Amps 3.13.4, Part III, Vol -6, SR 2023-24 Each 719.63 719.63 12.0 False None None False None False 8635.56 0 3695008 135842 None Code194 Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board. -6A Bell Buzzer 3.14.9, Part III, Vol -6, SR 2023-24 Nos 153.4 153.4 8.0 False None None False None False 1227.2 0 3695009 135842 None Code195 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 19/20 mm dia 2mm thick 1.2.1, Part III, Vol -6, SR 2023-24 m 77.88 77.88 1300.0 False None None False None False 101244.0 0 3695010 135842 None Code196 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary-25 mm dia 2mm thick 1.2.2, Part III, Vol -6, SR 2023-24 m 92.04 92.04 980.0 False None None False None False 90199.2 0 3695011 135842 None Code197 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary -32 mm dia 2.5mm thick 1.2.3, Part III, Vol -6, SR 2023-24 m 121.54 121.54 90.0 False None None False None False 10938.6 0 3695012 135842 None Code198 Supplying heavy gauge pvc conduit pipe ...dia...mm thick with suitable size bends, metal Junction boxes adhesive paste etc..,by groove cutting in the wall and fixing by bracing U & J hooks and Cement plasteriing upto the wall surface and run wirh 18 SWG GI fish wire run throughout the conduit where ever necessary. -19/ 20 mm dia 2mm thick 1.3.1, Part III, Vol -6, SR 2023-24 m 80.24 80.24 700.0 False None None False None False 56168.0 0 3695013 135842 None Code199 Supplying heavy gauge pvc conduit pipe ...dia...mm thick with suitable size bends, metal Junction boxes adhesive paste etc..,by groove cutting in the wall and fixing by bracing U & J hooks and Cement plasteriing upto the wall surface and run wirh 18 SWG GI fish wire run throughout the conduit where ever necessary. 25 mm dia 2mm thick 1.3.2, Part III, Vol -6, SR 2023-24 m 93.22 93.22 300.0 False None None False None False 27966.0 0 3695014 135842 None Code200 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010 -1.5 sqmm 2.3.2, Part III, Vol -6, SR 2023-24 m 30.68 30.68 2200.0 False None None False None False 67496.0 0 3695015 135842 None Code201 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010 -2.5 sqmm 2.3.3, Part III, Vol -6, SR 2023-24 m 49.56 49.56 6000.0 False None None False None False 297360.0 0 3695016 135842 None Code202 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010 -4.0 sqmm 2.3.4, Part III, Vol -6, SR 2023-24 m 74.34 74.34 3000.0 False None None False None False 223020.0 0 3695017 135842 None Code203 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010 -6.0 sqmm 2.3.5, Part III, Vol -6, SR 2023-24 m 108.56 108.56 1500.0 False None None False None False 162840.0 0 3695018 135842 None Code204 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010 -10.0 sqmm 2.3.6, Part III, Vol -6, SR 2023-24 m 197.06 197.06 400.0 False None None False None False 78824.0 0 3695019 135842 None Code205 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. -4 Way VTPN DB 5.17.1, Part III, Vol -6, SR 2023-24 Each 12188.22 12188.22 2.0 False None None False None False 24376.44 0 3695020 135842 None Code206 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100Percentage lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 125 A 25kA 5.15.2, Part III, Vol -6, SR 2023-24 Each 10145.64 10145.64 2.0 False None None False None False 20291.28 0 3695021 135842 None Code207 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.I - II - Double Door-12 Way SP & N 5.19.9, Part III, Vol -6, SR 2023-24 Each 2748.22 2748.22 4.0 False None None False None False 10992.88 0 3695022 135842 None Code208 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. -III - Double Door - 6 Way TP & N 5.19.12, Part III, Vol -6, SR 2023-24 Each 5829.2 5829.2 8.0 False None None False None False 46633.6 0 3695023 135842 None Code209 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. -III - Double Door - 4 Way TP & N 5.19.11, Part III, Vol -6, SR 2023-24 Each 4764.84 4764.84 6.0 False None None False None False 28589.04 0 3695024 135842 None Code210 Supplying, fixing and wiring Residual current Circuit Breaker (RCCB) 240/450V uoto 300mA sensitivity on exisiting wood/panel board.- 32-40A 4 pole 5.20.8, Part III, Vol -6, SR 2023-24 Each 6073.46 6073.46 10.0 False None None False None False 60734.6 0 3695025 135842 None Code211 Supplying, fixing and wiring Residual current Circuit Breaker (RCCB) 240/450V uoto 300mA sensitivity on exisiting wood/panel board. -16-25A 4 pole 5.20.6, Part III, Vol -6, SR 2023-24 Each 5977.88 5977.88 10.0 False None None False None False 59778.8 0 3695026 135842 None Code212 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required. confirming to IEC 60898. :- 6-32 A SP 5.18.1, Part III, Vol -6, SR 2023-24 Each 489.7 489.7 170.0 False None None False None False 83249.0 0 3695027 135842 None Code213 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required. confirming to IEC 60898.:- 6-32 A DP 5.18.4, Part III, Vol -6, SR 2023-24 Each 872.02 872.02 28.0 False None None False None False 24416.56 0 3695028 135842 None Code214 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required. confirming to IEC 60898. :- 6-32 A TPN 5.18.7, Part III, Vol -6, SR 2023-24 Each 2026.06 2026.06 4.0 False None None False None False 8104.24 0 3695029 135842 None Code215 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required. confirming to IEC 60898. :- 40 A TPN 5.18.8, Part III, Vol -6, SR 2023-24 Each 3591.92 3591.92 14.0 False None None False None False 50286.88 0 3695030 135842 None Code216 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70Percentage lumen maintenance with CRI greater than 80. Power Input: 220-240V at the rate 50/60Hz & Power factor greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.-LED light fighting 1 x4'- 20/22 w 11.3.2, Part III, Vol -6, SR 2023-24 Nos 814.2 814.2 150.0 False None None False None False 122130.0 0 3695031 135842 None Code217 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70Percentage lumen maintenance with CRI greater than 80. Power Input: 220-240V at the rate 50/60Hz & Power factor greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.-LED light fighting 1 x2'- 9/10w 11.3.1, Part III, Vol -6, SR 2023-24 Nos 650.18 650.18 36.0 False None None False None False 23406.48 0 3695032 135842 None Code218 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. - 6A Pendant Holder 3.14.6, Part III, Vol -6, SR 2023-24 Each 83.78 83.78 50.0 False None None False None False 4189.0 0 3695033 135842 None Code219 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70Percentage. efficacy greater than80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should greater than 5Percentage of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20Percentage, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 9 Watts 11.11.4, Part III, Vol -6, SR 2023-24 Each 181.72 181.72 50.0 False None None False None False 9086.0 0 3695034 135842 None Code220 Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI greater than 70Percentage. efficacy greater than100 lumen per watt, 120degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should greater than 5Percentage of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20Percentage, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.:- LED modular down light 2'x2' / 1' x 4' 34 -36watt 11.6.5, Part III, Vol -6, SR 2023-24 Each 6959.64 6959.64 10.0 False None None False None False 69596.4 0 3695035 135842 None Code221 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70Percentage lumen maintenance with CRI greater than 80. Power Input: 220-240V at the rate 50/60Hz & Power factor greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. :- LED square or round down light 5-6W 11.5.1, Part III, Vol -6, SR 2023-24 Each 673.78 673.78 100.0 False None None False None False 67378.0 0 3695036 135842 None Code222 Supplying of 1440rpm heavy duty eahust fan with bracket blades suitable for operate on 230V 50Hz, AC Supply complete.:- 12" sweep (300 mm) 6.2.1, Part III, Vol -6, SR 2023-24 Each 3503.42 3503.42 12.0 False None None False None False 42041.04 0 3695037 135842 None Code223 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system:- 48" Sweep ( 1200mm) Reguler Model 6.3.1, Part III, Vol -6, SR 2023-24 Each 3521.12 3521.12 66.0 False None None False None False 232393.92 0 3695038 135842 None Code224 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system :- 56" Sweep ( 1400mm) Reguler Model 6.3.2, Part III, Vol -6, SR 2023-24 Each 3576.58 3576.58 24.0 False None None False None False 85837.92 0 3695039 135842 None Code225 Supplying wall mounting fan suitable to operate at single phase 230V AC Supply. :- 400mm sweep 6.5.2, Part III, Vol -6, SR 2023-24 Each 3790.16 3790.16 4.0 False None None False None False 15160.64 0 3695040 135842 None Code226 Fixing all types and all capacities fluorescent / false ceiling/spotIight/ LED fittings indoor on the wall/ ceiling/rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos of round blocks and clamps (if required) :- On wall/ceiling/Rafters/Girders 13.7.1, Part III, Vol -6, SR 2023-24 Each 143.96 143.96 186.0 False None None False None False 26776.56 0 3695041 135842 None Code227 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. 13.10, Part III, Vol -6, SR 2023-24 Each 201.78 201.78 94.0 False None None False None False 18967.32 0 3695042 135842 None Code228 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or rackets with bolts and nutsand a 5 amps, ceiling rose with sufficient length of 23/ 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame if required. 13.13, Part III, Vol -6, SR 2023-24 Each 834.26 834.26 12.0 False None None False None False 10011.12 0 3695043 135842 None Code229 Supplying and Fixing........mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires. Using 40mm dia GI pipe 13.2.3, Part III, Vol -6, SR 2023-24 Each 1744.04 1744.04 8.0 False None None False None False 13952.32 0 3695044 135842 None Code230 Supplying and drawing PVC Flexible one pair telephone unarmoured tinned copper cable :- 2 Pair 8.2.2, Part III, Vol -6, SR 2023-24 m 24.78 24.78 520.0 False None None False None False 12885.6 0 3695045 135842 None Code231 Supplying and drawing PVC Insulated Gas injected physical Foam jelly floaded co-Axial TV Cable RG-6 8.3, Part III, Vol -6, SR 2023-24 m 51.92 51.92 330.0 False None None False None False 17133.6 0 3695046 135842 None Code232 Supplying & Drawing UTP- CAT 6E-LAN Cable 8.1, Part III, Vol -6, SR 2023-24 m 44.84 44.84 1200.0 False None None False None False 53808.0 0 3695047 135842 None Code233 Supplying and fixing of MDF krone junction box with KRONE module /telephone cable termination :- 20 Pair 8.13.2, Part III, Vol -6, SR 2023-24 Each 451.94 451.94 1.0 False None None False None False 451.94 0 3695048 135842 None Code234 Supplying fixing of Network Switches :- 24 port 10/100 Switch 8.9.5, Part III, Vol -6, SR 2023-24 Each 5546.0 5546.0 4.0 False None None False None False 22184.0 0 3695049 135842 None Code235 Supplying & Fixing of switch mounting rack with power manager & Cable manager :- 12U with 450mm depth 8.4.4, Part III, Vol -6, SR 2023-24 Each 10425.3 10425.3 1.0 False None None False None False 10425.3 0 3695050 135842 None Code236 Supply and fixing of Patch panel for Lan cabling :- 24 port 10/100 patch panel 8.12.2, Part III, Vol -6, SR 2023-24 Each 4838.0 4838.0 6.0 False None None False None False 29028.0 0 3695051 135842 None Code237 Supplying and Fixng of I/O socket with Back Box :- DOUBLE I/O 8.10.2, Part III, Vol -6, SR 2023-24 Each 649.0 649.0 55.0 False None None False None False 35695.0 0 3695052 135842 None Code238 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 5.34, Part III, Vol -6, SR 2023-24 Each 663.16 663.16 7.0 False None None False None False 4642.12 0 3695053 135842 None Code239 Supplying, fixing of LED type panel board indicating lamp with required colour suitable for 220VA.C 50HZ 12/24V DC. 5.38, Part III, Vol -6, SR 2023-24 Each 607.7 607.7 6.0 False None None False None False 3646.2 0 3695054 135842 None Code240 Supplying, Fixing, and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest mircrocontroller based, digital readout of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/flush mounting panel board 5.21, Part III, Vol -6, SR 2023-24 Each 10920.9 10920.9 2.0 False None None False None False 21841.8 0 3695055 135842 None Code241 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. - 200A 5.14.10, Part III, Vol -6, SR 2023-24 Each 46159.24 46159.24 2.0 False None None False None False 92318.48 0 3695056 135842 None Code242 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) :- 200A 5.12.4, Part III, Vol -6, SR 2023-24 Each 17993.82 17993.82 2.0 False None None False None False 35987.64 0 3695057 135842 None Code243 Supplying fixing and wiring rotary selector switch suitable for voltmeter 5.28, Part III, Vol -6, SR 2023-24 Each 188.8 188.8 2.0 False None None False None False 377.6 0 3695058 135842 None Code244 Supplying fixing and wiring rotary selector switch suitable for Ammeter 5.27, Part III, Vol -6, SR 2023-24 Each 236.0 236.0 2.0 False None None False None False 472.0 0 3695059 135842 None Code245 Suppying , fixing and wiring 3 phase digital ammeter and voltmeter 5.29, Part III, Vol -6, SR 2023-24 Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3695060 135842 None Code246 Supplying.........A rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic / FRP / DMC insulator which are mounted on powder coated 40x6mm M.S. flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.:- 250A 4*30*10mm aluminium strips 5.40.2, Part III, Vol -6, SR 2023-24 m 4053.3 4053.3 3.2 False None None False None False 12970.56 0 3695061 135842 None Code247 Supplying, fixing and wiring of electronic trivector meter (ETV) 5 to 32/63 Amps three Phase 4 wire whole current class-1 Accuracy energy meter 5.35, Part III, Vol -6, SR 2023-24 Each 6731.9 6731.9 1.0 False None None False None False 6731.9 0 3695062 135842 None Code248 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required. confirming to IEC 60898. :- 50-63 A TPN 5.18.9, Part III, Vol -6, SR 2023-24 Each 3643.84 3643.84 6.0 False None None False None False 21863.04 0 3695063 135842 None Code249 Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. flat ... with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. :- 40x40x6mm 5.41.1, Part III, Vol -6, SR 2023-24 m 359.9 359.9 5.2 False None None False None False 1871.48 0 3695064 135842 None Code250 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. :- 16 SWG 5.42.2, Part III, Vol -6, SR 2023-24 Sq CM 0.51 0.51 89000.0 False None None False None False 45390.0 0 3695065 135842 None Code251 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 :- 70 Sqmm, 3.5 Core, (18 GI Strips - 4 x 0.8 mm) 32.13, Part II, Vol -6, SR 2023-24 Km 375136.16 375136.16 0.2 False None None False None False 75027.232 0 3695066 135842 None Code252 Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to complete in the following strata. Ordinary/soft rock (without requiring blasting) Depth upto 1.50 m 1.19.1, Vol - 1, SR 2023-24 Cum 589.29 589.29 192.0 False None None False None False 113143.68 0 3695067 135842 None Code253 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete :- 10 kVA ON LINE UPS 9.3.5, Part III, Vol -6, SR 2023-24 Each 122212.6 122212.6 2.0 False None None False None False 244425.2 0 3695068 135842 None Code254 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. -:-75/80 AH capacity 9.5.6, Part III, Vol -6, SR 2023-24 Each 12002.96 12002.96 12.0 False None None False None False 144035.52 0 3695069 135842 None Code255 Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run relay and over load protection, one ceiling mounted indoor unit and one outdoor condenser unit including standard accessories covered with insulation tube including battery operated cordless unit :- 3 TR Cassette 3 Ph 6.9.2, Part III, Vol -6, SR 2023-24 Each 124038.06 124038.06 14.0 False None None False None False 1736532.84 0 3695070 135842 None Code256 Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run relay and over load protection, one ceiling mounted indoor unit and one outdoor condenser unit including standard accessories covered with insulation tube including battery operated cordless unit.:- 4 TR Cassette 3 Ph 6.9.3, Part III, Vol -6, SR 2023-24 Each 141860.78 141860.78 6.0 False None None False None False 851164.68 0 3695071 135842 None Code257 Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit.:- 2 Ton capacity 6.7.3, Part III, Vol -6, SR 2023-24 Each 63776.64 63776.64 5.0 False None None False None False 318883.2 0 3695072 135842 None Code258 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable angle iron support up to 3.0 ton split type A/C 6.12, Part III, Vol -6, SR 2023-24 Each 3746.5 3746.5 5.0 False None None False None False 18732.5 0 3695073 135842 None Code259 Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube :- Split Ac units 6.13.1, Part III, Vol -6, SR 2023-24 m 1827.82 1827.82 30.0 False None None False None False 54834.6 0 3695074 135842 None Code260 Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube:- Cassette AC units 6.13.2, Part III, Vol -6, SR 2023-24 m 1934.02 1934.02 100.0 False None None False None False 193402.0 0 3695075 135842 None Code261 Supplying & fixing relay for over load protection for window and split air conditioners 6.17, Part III, Vol -6, SR 2023-24 Each 776.44 776.44 25.0 False None None False None False 19411.0 0 3695076 135842 None Code262 Supply, Installation, Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/PolyCrystalline silicon solarcells, net metering facility, necessary protections, earthing, mounted on Aluminium/ GI structure of suitable strength with following components complete as required: -a )Solar Photo voltaic Module of capacity 330W por above, manufactured in India, conforming to IS 14286/ IEC61215, IS/ IEC61730 - Part-1, IS/IEC 61730 - Part 2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5Percentage. PV modules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not be less than 90Percentage at the end of 10 years and 80Percentage at the end of 25 years. b)Power Conditioning Unit(PCU) of 350 800 VDC Input voltage range and 400 VAC, three phase, 4wire, 50Hz+/2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97Percentage, to talharmonic distortion less than 3Percentage and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d)Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLP Einsulated copper conductor 1.1kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. 10kW ON-Grid Solar Power System. Page no 1&2 Delhi Schedule of Rates & Delhi Analysis of Rates (E&M) (Item for Solar Photovoltaic Power Plant) Nos 72050.8 72050.8 10.0 False None None False None False 720508.0 0 3695077 135842 None Code263 Supply, erection, testing and commissioning of ..... KVA 5Star rated Aluminium/Copper wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, marshalling box with wiring, oil level indicator with + 5Percentage to -10Percentage Steps of 2.5Percentage, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. :- 500 KVA - Copper Wound I.No. 15.7.13, Ele SR 2018-19 Each 1110380.0 1110380.0 1.0 False None None False None False 1110380.0 0 3695078 135842 None Code264 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 :- 95 Sqmm, (54 GI Wires - 2.5 mm Dia) Sl.No. 254, I.No. 36.01, Part II, Vol-6, SR 2023-24 Km 1049805.88 1049805.88 0.2 False None None False None False 209961.176 0 3695079 135842 None Code265 11 kV Heat Shrinkable Cable termination kit for XLPE Cable:- Indoor I.No. 50.3.1, Part I, Vol-6, SR 2023-24 Nos 4493.44 4493.44 4.0 False None None False None False 17973.76 0 3695080 135842 None Code266 11 kV Heat Shrinkable Cable termination kit for XLPE Cable:-Outdoor I.No. 50.3.2, Part I, Vol-6, SR 2023-24 Nos 4790.8 4790.8 4.0 False None None False None False 19163.2 0 3695081 135842 None Code267 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975:-400 Sqmm, 3.5 Core, (39 GI Strips - 4 x 0.8 mm) Sl.No. 216, I.No. 32.20, Part II, Vol-6,SR 2023-24 Km 1715093.42 1715093.42 0.2 False None None False None False 343018.684 0 3695082 135842 None Code268 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975:- 150 Sqmm, 3.5 Core, (25 GI Strips - 4 x 0.8 mm) Sl.No. 212, I.No. 32.16, Part II, Vol-6,SR 2023-24 Km 654492.9 654492.9 0.8 False None None False None False 523594.32 0 3695083 135842 None Code269 Labour charges for Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden / Aluminum Rollers as directed by the departmental staff -LT Cable:- 120 to 240 Sqmm (from LT Box to MP) Sl.No. 176, I.No. 21.07, Part II, Vol-6,SR 2023-24 Km 38088.04 38088.04 0.8 False None None False None False 30470.432 0 3695084 135842 None Code270 Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing :-100 mm dia. pipes I.No. 16.1.1, Vol-5,SR 2023-24 m 480.26 480.26 50.0 False None None False None False 24013.0 0 3695085 135842 None Code271 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes Heavy Duty Copper Terminal Long Barrel :-150 Sqmm Copper Terminal, Apprx Wt: 98 Gm Sl.No. 463, I.No. 59.07,Part II, Vol-6,SR 2023-24 Nos 215.94 215.94 16.0 False None None False None False 3455.04 0 3695086 135842 None Code272 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes Heavy Duty Copper Terminal Long Barrel :-240 Sqmm Copper Terminal, Apprx Wt: 218 Gm Sl.No. 466, I.No. 59.10, Part II, Vol-6,SR 2023-24 Nos 418.9 418.9 16.0 False None None False None False 6702.4 0 3695087 135842 None Code273 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes Brass Cable Gland :- for 35 Sqmm cable - 32 sqmm Sl.No. 508, I.No. 63.02, Part II, Vol-6,SR 2023-24 Nos 112.1 112.1 8.0 False None None False None False 896.8 0 3695088 135842 None Code274 Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two "O" rings and a coupler of suitable size, including loading and unloading at both destination and cutting of pipes where ever necessary including jointing with all labour, all lead and lift including encasing the pipe around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done the contractor shall have to make his own arrangement for procuring water for testing etc. complete. :- SN8 Double Wall Corrugated HDPE pipe sizes of 100 mm dia I.No. 9.16.1, Vol-5,SR 2023-24 m 367.33 367.33 18.0 False None None False None False 6611.94 0 3695089 135842 None Code275 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 300X50mm Cable tray I.No. 12.59.2, Part III, Vol-6,SR 2023-24 m 692.66 692.66 12.0 False None None False None False 8311.92 0 3695090 135842 None Code276 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm allround with alterate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.GI pipe earthing make-TATA/GENITH,JINDAL. I.No. 12.57, Part III, Vol-6, SR 2023-24 Nos 5022.08 5022.08 20.0 False None None False None False 100441.6 0 3695091 135842 None Code277 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.:- 25x3mm GI Strip I.No. 12.58.2, Part III, Vol-6, SR 2023-24 m 96.76 96.76 100.0 False None None False None False 9676.0 0 3695092 135842 None Code278 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. :- 25x3mm Copper strip I.No. 12.58.7, Part III, Vol-6, SR 2023-24 m 672.6 672.6 25.0 False None None False None False 16815.0 0 3695093 135842 None Code279 Supplying and running GI/Copper conductor for grounding and (along other wires in conduit sysytem of wiring) using necessary suitable size clamps,nails,guttas,spacers etc.: -8 SWG GI Wire I.No. 6.8.3, Ele SR 2019-20 m 22.42 22.42 60.0 False None None False None False 1345.2 0 3695094 135842 None Code280 Supplying and running GI/Copper conductor for grounding and (along other wires in conduit sysytem of wiring) using necessary suitable size clamps,nails,guttas,spacers etc,:- 8 SWG Copper wire. I.No. 6.8.6, Ele SR 2019-20 m 123.9 123.9 60.0 False None None False None False 7434.0 0 3695095 135842 None Code281 Supply and installation of 2kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 3.6 Kg, empty weight 1.6 Kg, Can Height 344MM, Diameter 108MM, Discharge Time less than 8 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 2 meters, applicable on Class A,8, C and electrically started Fire, A Rating 1A, 8 Rating 88, Can construction : Deep drawn & Co. , Mig welded, valve Construciton: Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy PoIyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specifications. complete. IS 15683, CE A 5 with Providing ABC Powder based MAP 50, 2Kg I.No. 15.1, Part III, Vol-6,SR 2023-24 Nos 1593.0 1593.0 10.0 False None None False None False 15930.0 0 3695096 135842 None Code282 Supply and installation of 9 Ltr Fire Extinugisher Aqueous Film Forming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight 15.1Okg. empty weight 6.10kg Can Height 615 MM, Diameter 175 MM, Discharge Time less than 60 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 6 Meters, applicable on Class A,8,CARating 13A, 8 Rating 558, Can Construction; Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy PoIyster Powder coating, Sheet metal thickness: 2.0MM, lSI and EN Approved, Helium Leak Detection Tested, 1 Years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specifications. complete I.No. 15.40, Part III, Vol-6,SR 2023-24 Nos 9558.0 9558.0 5.0 False None None False None False 47790.0 0 3695097 135842 None Code283 Supply and installation of 4.5Kg C02 Gas Type aluminium body Squeeze grip Fire Extinugisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 11.16Kg. empty Weight 6.66Kg. Can Height 860MM Diameter 140MM, Discharge Time less than10 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuction : Cold Impact Extrusion, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Aluminium metal ISO & PESO Approved, 3 Year Warranty. including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specifications. complete. I.No. 15.39, Part III, Vol-6,SR 2023-24 Nos 8850.0 8850.0 5.0 False None None False None False 44250.0 0 3695098 135842 None Code284 Providing 6 Kg -Supply, installation in position, testing and commissioning of CQRS 6 Kg - Direct Low Pressue System - Gross Weight 9.42 Kg, Empty Weight 3.42 Kg, Can Height 460 MM, Diameter 160M M, Can construction : Deep Drawn, Valve Construction : ForgingI Machining, External Construction : Epoxy Powder Coating, Sheet Metal Thickness: 2.00MM, 1 Year warranty, Valve, Nickel Plated, With lntergrated Ball Valve, Integrated position control for ball valve: open- close, Extinguishing Clean Agent HCFC 123, Zero ODP, Stored Pressue, Fitted with Pressue Gauge, Control Panel having Monitoring LED's for AC Power, System On, Discharged, Valve Closed, Valve Open, Pressure Healthy, Strobe Red, Strobe Amber, OLEO Graphic Display 95x16, Battery Backp, 3 Outputs using Potential Free relay contact, Audio Output using Piezo buzzer, 5 Meter Sensor Tue UV Resistance with Pressrization of Tube Using Nitrogen Gas, End of Line Plug 1 Pc, End of Line Adapter 1 Pc, T Connection/Elbow/Straight Connection 1 Pc, Presste IS 15683 and CE Approved uidelines of fire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient. I.No. 15.52, Part III, Vol-6,SR 2023-24 Nos 12390.0 12390.0 5.0 False None None False None False 61950.0 0 3695099 135842 None Code285 Supplying of two bucket stand alongwith buckets. Complete I.No. 15.112, Part III, Vol-6,SR 2023-24 Nos 1298.0 1298.0 6.0 False None None False None False 7788.0 0 3695100 135842 None Code286 Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional/ international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc.,The total product and services shall adhere to IS 14665/2016 ( with latest amendments) part/section 1 to 5 with regards to general guidelines of fire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code (NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. D With Out Machine Room-SS Finish -15 Passengers -2 stops I.No. 14.4.5, Part III, Vol-6, SR 2023-24 Job 2118219.95 2118219.95 1.0 False None None False None False 2118219.95 0 3695101 135842 None Code287 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. I.No. 18.3, Vol-5, SR 2023-24 Each 2546.68 2546.68 2.0 False None None False None False 5093.36 0 3695102 135842 None Code288 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter. 2) S-D- Star Delta Starter etc. complete. -Upto 3 HP pumps I.No. 13.23.1, Vol-5, SR 2023-24 Each 8437.0 8437.0 1.0 False None None False None False 8437.0 0 3695103 135842 None Code289 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete.:- 3.00 HP/2.2KW -9 STG I.No. 13.9.1, Vol-5, SR 2023-24 Each 26106.67 26106.67 2.0 False None None False None False 52213.34 0 3695104 135842 None Code290 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. -1x3x6 Sqm. I.No. 13.22.4, Vol-5,SR 2023-24 m 175.23 175.23 30.0 False None None False None False 5256.9 0 3695105 135842 None Code291 Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 :- For Grading -V Material (6 m wide paver road) SI.No. 4.1(v), Ref. to MoRT&H : IRC - 401, Vol-3,SR 2023-24 Cum 3228.13 3228.13 150.0 False None None False None False 484219.5 0 3695106 135842 None Code292 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways of light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the san bedding layer through vinratorey compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per dircetion of Engineer-in-Charge.:- 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. P.No.261, I.No.16.91.2,Vol-2,Delhi SR 2023 Sqm 1287.97 1287.97 797.4 False None None False None False 1027027.278 0 3695107 135842 None Code293 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. -Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates I.No. 2.1.2, Vol-1,SR 2023-24 Cum 7351.87 7351.87 11.25 False None None False None False 82708.5375 0 3695108 135842 None Code294 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) -600x300x100mm SI.No. 8.42.6, Vol-3,SR 2023-24 m 345.27 345.27 250.0 False None None False None False 86317.5 0 3695109 135842 None Code295 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. I.No. 8.41, Vol-2,SR 2023-24 Sqm 216.77 216.77 75.0 False None None False None False 16257.75 0 3695110 135842 None Code296 Raising of Sunken / Transplant / Seed Beds of 12 M x 1.20 M size Covering the seed bed with grass/straw including the cost of collection & transport of grass / straw to the nursery site. I.NO.1.6(e) Vol-8 SR (2022-23) Sqm 73.39 73.39 3.138 False None None False None False 230.29782 0 3695111 135842 None Code297 Procurement of Ingredients: Procurement of farmyard manure/compost, sand andred-earth (ingredients) required for raising seedlings inclusive of transportation,breaking of clods, sieving and heaping each ingredient separately at nursery site: Fine coarse Red-earth/soil I.NO.1.2(a) vol-8 SR (2022-23) Cum 98.65 98.65 452.0 False None None False None False 44589.8 0 3695112 135842 None Code298 Procurement of Ingredients: Procurement of farmyard manure/compost, sand andred-earth (ingredients) required for raising seedlings inclusive of transportation,breaking of clods, sieving and heaping each ingredient separately at nursery site: Farm yard manure/compost I.NO.1.2(c) vol-8 SR (2022-23) Cum 2057.68 2057.68 45.2 False None None False None False 93007.136 0 3695113 135842 None Code299 Excavation of pits of size 1 m x 1 m x 1 m with vertically cut edges to make an uniform cube and heaping the excavated soil outside the pits (1/3rd top soil to bedeposited on the upper side & 2/3rd on the lower side): n hard soil I.NO.2.11(b) vol-8 SR (2022-23) Pits 329.77 329.77 2.0 False None None False None False 659.54 0 3695114 135842 None Code300 KSRRB M300-9. Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year . I.NO. 19.88 KPWD (2018-19) Each 1362.9 1362.9 3.0 False None None False None False 4088.7 0 3695115 135842 None Code301 Fabrication of tree guards of 4 poles of 2.5 m. length and 12 batons of 40 cms length, treating with creosote oil completely from bottom to top, fixing side batonsand chicken wire mesh of 28 gauge to a height of 2m. from the top of the poles(including the cost of chicken wire mesh and creosote oil) Transportation of thetree guards and fixing the tree guards firmly over the seedlings planted in towns/cities - complete. (Including the cost of purchase and delivery of poles andbatons) I.NO.7.6(b) vol-8 SR (2022-23) Each 1630.68 1630.68 3.0 False None None False None False 4892.04 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1722857905000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1722857905000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1722857905000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1722857905000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1722857905000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1722857920000 0 None None ELIGIBILITY All Other Conditions as per tender documents None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Satisfactory Completion as a prime Contractor for at least one similar work to an extent of 50% of the cost of the work of value not less than Rs. 470.00 Lakhs. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year the following minimum quantities of work Earthwork Excavation Cum3000 PCC / RMCCum2240 Reinforcement Steel MT210 Structural Steel MT 0 Centering & Shuttering work Sqm 4000 Electrification work Rs85.00 Lakhs Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None As Per Tender Document Clause No.3 All relevant documents has to be uploaded Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- As Per Tender Document Clause No.3 None None None None Achieved a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 2000.00 Lakhs in at least two financial years. (usually not less than two times the estimated annual payments under this contract) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None All Tenderers shall provide the requested information accurately and sufficient details in Section 3 Qualification information Others All Tenderers shall provide the requested information accurately and sufficient details in Section 3 Qualification information. createdTs version createdDate modifiedDate documentName None None None None Others -- All Tenderers shall provide the requested information accurately and sufficient details in Section 3 Qualification information None None None None Liquid assets and or availability of credit facilities of not less than Rs.300.00 Lakhs Others Liquid assets and or availability of credit facilities of not less than Rs.300.00 Lakhs createdTs version createdDate modifiedDate documentName None None None None Others -- Liquid assets Certificate None None None None Equipment Criteria As per Tender Document Others Equipment Criteria As per Tender Document createdTs version createdDate modifiedDate documentName None None None None Others -- Equipment Criteria As per Tender Document
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turn Over Certifcate True Technical Bid GST Registration Certificate True Technical Bid Work Done Certificates True Technical Bid PAN CARD True Technical Bid Last 5 Years Income Tax Returns Copies True Technical Bid Firm Representative Authorization for Participation in the tender and sign the tender documents True Technical Bid All Other Conditions Stipulated in Bid Document True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Bengaluru Urban None None None IBAB Campus Helix Bio Tech Park Electronics City Phase 1 Bengaluru- 560 100 None None None None None None
tenderAddress	createdTs 1722859662000 version 0 createdDate None modifiedDate None blockNumber Grameenaabhiruddi Bhavana, Ananda Rao Circle street None city Bengaluru state Karnataka pin 560009
tenderRecallDTO	None