| 3574669 | 129934 | None | code01 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work..(Page No.05. Iitem no.1.12 of Vol-1- -KPWD 2023-2024) | Cum | 97.85 | 97.85 | 195.299 | False | None | None | False | None | False | 19110.00715 | 0 |
| 3574670 | 129934 | None | code02 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In all kinds of soils Depth upto 3 m(Page No.08. Iitem no.1.14.1 of Vol-1- -KPWD 2023-2024) | Cum | 105.06 | 105.06 | 334.4332 | False | None | None | False | None | False | 35135.551992 | 0 |
| 3574671 | 129934 | None | code03 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In ordinary/soft rock without blasting upto 1.5 m depth (Page No.08. Iitem no.1.15.1 of Vol-1- -KPWD 2023-2024) | Cum | 373.89 | 373.89 | 31.4325 | False | None | None | False | None | False | 11752.297425 | 0 |
| 3574672 | 129934 | None | code04 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(Page No.07. Iitem no.1.9 of Vol-1- -KPWD 2023-2024) | Cum | 273.98 | 273.98 | 314.325 | False | None | None | False | None | False | 86118.7635 | 0 |
| 3574673 | 129934 | None | code05 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.(Page No.05. Iitem no.4.1 of Vol-2- -KPWD 2023-2024) | Sqm | 121.54 | 121.54 | 682.0 | False | None | None | False | None | False | 82890.28 | 0 |
| 3574674 | 129934 | None | code06 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.1.3 of Vol-1- -KPWD 2023-2024) | Cum | 6168.67 | 6168.67 | 163.996 | False | None | None | False | None | False | 1011637.20532 | 0 |
| 3574675 | 129934 | None | code07 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) The work includes cost of all materials, labour charges etc all leads and lifts, HOM machineries & fuel and all other incidental works curing etc., required to complete the work as per all relevant specifications and as per the directions of Engineer in charge of work (Page No.09. Iitem no.5.4 of Vol-2- -KPWD 2023-2024) | Cum | 6580.67 | 6580.67 | 60.5034 | False | None | None | False | None | False | 398152.909278 | 0 |
| 3574676 | 129934 | None | code08 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1- -KPWD 2023-2024) | Cum | 6526.08 | 6526.08 | 157.5929 | False | None | None | False | None | False | 1028463.872832 | 0 |
| 3574677 | 129934 | None | code09 | Providing and removing centering, shuttering, strutting, propping etc for all length and widths The work includes cost of all materials, labour charges, all leads and lifts all other incidental works required to complete the work as per relevant specifications and directions of Engineer in charge of work. (For Footing at 8 percent) | Cum | 522.08 | 522.08 | 157.5929 | False | None | None | False | None | False | 82276.101232 | 0 |
| 3574678 | 129934 | None | code10 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1- -KPWD 2023-2024) | Cum | 6526.08 | 6526.08 | 6.5625 | False | None | None | False | None | False | 42827.4 | 0 |
| 3574679 | 129934 | None | code11 | Providing and removing centering, shuttering, strutting, propping etc for all length and widths The work includes cost of all materials, labour charges, all leads and lifts all other incidental works required to complete the work as per relevant specifications and directions of Engineer in charge of work. (for Pedastals at 5 percent) | Cum | 326.3 | 326.3 | 6.5625 | False | None | None | False | None | False | 2141.34375 | 0 |
| 3574680 | 129934 | None | code12 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.3.2 of Vol-1- -KPWD 2023-2024) | Cum | 6674.4 | 6674.4 | 32.4096 | False | None | None | False | None | False | 216314.63424 | 0 |
| 3574681 | 129934 | None | code13 | Providing and removing centering, shuttering, strutting, propping etc for all length and widths The work includes cost of all materials, labour charges, all leads and lifts all other incidental works required to complete the work as per relevant specifications and directions of Engineer in charge of work. (for Plinth Beam at at 50 percent) | Cum | 3337.2 | 3337.2 | 32.4096 | False | None | None | False | None | False | 108157.31712 | 0 |
| 3574682 | 129934 | None | code14 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1- -KPWD 2023-2024) | Cum | 6526.08 | 6526.08 | 6.5625 | False | None | None | False | None | False | 42827.4 | 0 |
| 3574683 | 129934 | None | code15 | Providing and removing centering, shuttering, strutting, propping etc for all length and widths The work includes cost of all materials, labour charges, all leads and lifts all other incidental works required to complete the work as per relevant specifications and directions of Engineer in charge of work. (for columns below plinth at 70 percent) | Cum | 4568.25 | 4568.25 | 6.5625 | False | None | None | False | None | False | 29979.140625 | 0 |
| 3574684 | 129934 | None | code16 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1- -KPWD 2023-2024) | Cum | 7048.29 | 7048.29 | 24.57 | False | None | None | False | None | False | 173176.4853 | 0 |
| 3574685 | 129934 | None | code17 | Providing and removing centering, shuttering, strutting, propping etc for all length and widths The work includes cost of all materials, labour charges, all leads and lifts all other incidental works required to complete the work as per relevant specifications and directions of Engineer in charge of work. for columns above plinth at 70 percent | Cum | 4933.8 | 4933.8 | 24.57 | False | None | None | False | None | False | 121223.466 | 0 |
| 3574686 | 129934 | None | code18 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1- -KPWD 2023-2024) | Cum | 7048.29 | 7048.29 | 46.9544 | False | None | None | False | None | False | 330948.227976 | 0 |
| 3574687 | 129934 | None | code19 | Providing and removing centering, shuttering, strutting, propping etc for all length and widths The work includes cost of all materials, labour charges, all leads and lifts all other incidental works required to complete the work as per relevant specifications and directions of Engineer in charge of work. for ground floor lintel at 60 percent | Cum | 4228.97 | 4228.97 | 46.9544 | False | None | None | False | None | False | 198568.748968 | 0 |
| 3574688 | 129934 | None | code20 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1- -KPWD 2023-2024) | Cum | 7048.29 | 7048.29 | 101.3391 | False | None | None | False | None | False | 714267.365139 | 0 |
| 3574689 | 129934 | None | code21 | Providing and removing centering, shuttering, strutting, propping etc for all length and widths The work includes cost of all materials, labour charges, all leads and lifts all other incidental works required to complete the work as per relevant specifications and directions of Engineer in charge of work. for ground floor slab at 50 percent | Cum | 3524.15 | 3524.15 | 101.3391 | False | None | None | False | None | False | 357134.189265 | 0 |
| 3574690 | 129934 | None | code22 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1- -KPWD 2023-2024) | Cum | 7048.29 | 7048.29 | 6.8557 | False | None | None | False | None | False | 48320.961753 | 0 |
| 3574691 | 129934 | None | code23 | Providing and removing centering, shuttering, strutting, propping etc for all length and widths The work includes cost of all materials, labour charges, all leads and lifts all other incidental works required to complete the work as per relevant specifications and directions of Engineer in charge of work. (for ground floor Chejja at 45 percent) | Cum | 3171.73 | 3171.73 | 6.8557 | False | None | None | False | None | False | 21744.429361 | 0 |
| 3574692 | 129934 | None | code24 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1- -KPWD 2023-2024) | Cum | 7118.77 | 7118.77 | 5.3617 | False | None | None | False | None | False | 38168.709109 | 0 |
| 3574693 | 129934 | None | code25 | Providing and removing centering, shuttering, strutting, propping etc for all length and widths The work includes cost of all materials, labour charges, all leads and lifts all other incidental works required to complete the work as per relevant specifications and directions of Engineer in charge of work. (Formwork-1st Floor -Stairs-For Centering & Shuttering 45 percent) | Cum | 3203.45 | 3203.45 | 5.3617 | False | None | None | False | None | False | 17175.937865 | 0 |
| 3574694 | 129934 | None | code26 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification-Buildings-(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11A) | t | 92140.71 | 92140.71 | 40.4255 | False | None | None | False | None | False | 3724834.272105 | 0 |
| 3574695 | 129934 | None | code27 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(Page No.17. Iitem no.6.32 of Vol-2- -KPWD 2023-2024) | Sqm | 1349.3 | 1349.3 | 546.2894 | False | None | None | False | None | False | 737108.28742 | 0 |
| 3574696 | 129934 | None | code28 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(Page No.17. Iitem no.6.33 of Vol-2- -KPWD 2023-2024) | Sqm | 1267.93 | 1267.93 | 25.2 | False | None | None | False | None | False | 31951.836 | 0 |
| 3574697 | 129934 | None | code29 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off orners wherever required smooth rendering, providing and removing caffolding, including cost of materials, labour, curing complete as per pecifications and as per directions of Engineer-in-charge(In side Plastering)(Page No.41. Iitem no.8.4.1 of Vol-2- -KPWD 2023-2024) | Sqm | 332.69 | 332.69 | 1213.8838 | False | None | None | False | None | False | 403847.001422 | 0 |
| 3574698 | 129934 | None | code30 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Page No.41. Iitem no.8.2.1 of Vol-2- -KPWD 2023-2024) | Sqm | 303.85 | 303.85 | 363.49 | False | None | None | False | None | False | 110446.4365 | 0 |
| 3574699 | 129934 | None | code31 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.(Page No.63. Iitem no.9.24 of Vol-2- -KPWD 2023-2024) | Sqm | 2937.56 | 2937.56 | 592.886 | False | None | None | False | None | False | 1741638.19816 | 0 |
| 3574700 | 129934 | None | code32 | In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile Colour glazed tile 30x45 cms 6mm thick with border of size 30 x 10 cms(Page No.60. Iitem no.9.7.2 of Vol-2- -KPWD 2023-2024) | Sqm | 1297.8 | 1297.8 | 1185.77 | False | None | None | False | None | False | 1538892.306 | 0 |
| 3574701 | 129934 | None | code33 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.(Page No.64. Iitem no.9.30 of Vol-2- -KPWD 2023-2024) | Sqm | 5487.84 | 5487.84 | 19.711 | False | None | None | False | None | False | 108170.81424 | 0 |
| 3574702 | 129934 | None | code34 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.(Page No.60. Iitem no.9.9 of Vol-2- -KPWD 2023-2024) | Sqm | 1108.28 | 1108.28 | 34.944 | False | None | None | False | None | False | 38727.73632 | 0 |
| 3574703 | 129934 | None | code35 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.46. Iitem no.8.29 of Vol-2- -KPWD2023-2024) | Sqm | 291.49 | 291.49 | 363.49 | False | None | None | False | None | False | 105953.7001 | 0 |
| 3574704 | 129934 | None | code36 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Page No.50. Iitem no.8.51 of Vol-2- -KPWD 2023-2024) | Sqm | 103.0 | 103.0 | 1213.883 | False | None | None | False | None | False | 125029.949 | 0 |
| 3574705 | 129934 | None | code37 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.48. Iitem no.8.39 of Vol-2- -KPWD 2023-2024) | Sqm | 130.81 | 130.81 | 1213.883 | False | None | None | False | None | False | 158788.03523 | 0 |
| 3574706 | 129934 | None | code38 | Providing Teak wood OR Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications(Page No.99. Iitem no.12.11 of Vol-2- -KPWD 2023-2024) | Cum | 142216.22 | 142216.22 | 0.5205 | False | None | None | False | None | False | 74023.54251 | 0 |
| 3574707 | 129934 | None | code39 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick Both side teak(Page No.105. Iitem no.12.57.1 of Vol-2- -KPWD 2023-2024) | Sqm | 4164.29 | 4164.29 | 18.375 | False | None | None | False | None | False | 76518.82875 | 0 |
| 3574708 | 129934 | None | code40 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :100x70x4 mm (ordinary type)(Page No.107. Iitem no.12.75.4 of Vol-2- -KPWD 2023-2024) | Nos | 144.2 | 144.2 | 27.0 | False | None | None | False | None | False | 3893.4 | 0 |
| 3574709 | 129934 | None | code41 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(Page No.107. Iitem no.12.76.2 of Vol-2- -KPWD2023-2024) | Each | 360.5 | 360.5 | 27.0 | False | None | None | False | None | False | 9733.5 | 0 |
| 3574710 | 129934 | None | code42 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :100x10mm(Page No.107. Iitem no.12.76.4 of Vol-2- -KPWD 2023-2024) | Each | 202.91 | 202.91 | 27.0 | False | None | None | False | None | False | 5478.57 | 0 |
| 3574711 | 129934 | None | code43 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(Page No.105. Iitem no.12.61 of Vol-2- -KPWD 2023-2024) | Nos | 1019.7 | 1019.7 | 9.0 | False | None | None | False | None | False | 9177.3 | 0 |
| 3574712 | 129934 | None | code44 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(Page No.105. Iitem no.12.60 of Vol-2- -KPWD 2023-2024) | Nos | 1083.56 | 1083.56 | 9.0 | False | None | None | False | None | False | 9752.04 | 0 |
| 3574713 | 129934 | None | code45 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete(Page No.105. Iitem no.12.62 of Vol-2- -KPWD2023-2024) | Nos | 244.11 | 244.11 | 9.0 | False | None | None | False | None | False | 2196.99 | 0 |
| 3574714 | 129934 | None | code46 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(Page No.105. Iitem no.12.59 of Vol-2- -KPWD 2023-2024) | Nos | 1147.42 | 1147.42 | 9.0 | False | None | None | False | None | False | 10326.78 | 0 |
| 3574715 | 129934 | None | code47 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(Page No.105. Iitem no.12.58 of Vol-2- -KPWD 2023-2024) | Nos | 123.6 | 123.6 | 9.0 | False | None | None | False | None | False | 1112.4 | 0 |
| 3574716 | 129934 | None | code48 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (Page No.104. Iitem no.12.51 of Vol-2- -KPWD 2023-2024) | Nos | 1046.48 | 1046.48 | 1.0 | False | None | None | False | None | False | 1046.48 | 0 |
| 3574717 | 129934 | None | code49 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.(Page No.86. Iitem no.11.34B of Vol-2- -KPWD 2023-2024) | Kg | 188.49 | 188.49 | 498.96 | False | None | None | False | None | False | 94048.9704 | 0 |
| 3574718 | 129934 | None | code50 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(Page No.110. Iitem no.12.90 of Vol-2- -KPWD 2023-2024) | Sqm | 6936.02 | 6936.02 | 27.0 | False | None | None | False | None | False | 187272.54 | 0 |
| 3574719 | 129934 | None | code51 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(Page No.109. Iitem no.12.85 of Vol-2- -KPWD2023-2024) | Sqm | 5890.57 | 5890.57 | 0.72 | False | None | None | False | None | False | 4241.2104 | 0 |
| 3574720 | 129934 | None | code52 | Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.47. Iitem no.8.34.2 of Vol-2- -KPWD 2023-2024) | Sqm | 59.74 | 59.74 | 18.375 | False | None | None | False | None | False | 1097.7225 | 0 |
| 3574721 | 129934 | None | code53 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.46. Iitem no.8.33.2 of Vol-2- -KPWD2023-2024) | Sqm | 142.14 | 142.14 | 18.375 | False | None | None | False | None | False | 2611.8225 | 0 |
| 3574722 | 129934 | None | code54 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.48. Iitem no.8.37 of Vol-2- -KPWD 2023-2024) | Sqm | 134.93 | 134.93 | 27.72 | False | None | None | False | None | False | 3740.2596 | 0 |
| 3574723 | 129934 | None | code55 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as(Page No.85. Iitem no.11.28 of Vol-2- -KPWD 2023-2024) | Kg | 581.95 | 581.95 | 180.0 | False | None | None | False | None | False | 104751.0 | 0 |
| 3574724 | 129934 | None | code56 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in-Charge(Page No.84. Iitem no.11.26.1 of Vol-2- -KPWD 2023-2024) | Kg | 142.14 | 142.14 | 524.475 | False | None | None | False | None | False | 74548.8765 | 0 |
| 3574725 | 129934 | None | code57 | Transportation and Disposal of Excavated Earth, including all types of debris including dressing, leveling and loading & unloading mechanical or manual means, all lifts, all leads as per relevant specifications and directions of engineer in charge of work to a lead of all distancesLoading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum. (Tipper 5.5 m3)(Page No.5. Iitem no.1.1 of Vol-3- -KPWD 2023-2024) | Cum | 139.05 | 139.05 | 561.1657 | False | None | None | False | None | False | 78030.090585 | 0 |
| 3574726 | 129934 | None | code58 | Open Conduit SystemSupplying heavy gauge PVC conduit pipe19/20mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted woodplugs in case of RCC ceiling and RCC wall/ stone structure orrawl plugs in case of brick walls and cement plastering thedamaged portion using heavy gauge saddles at an interval of 700mm using NF screws( -KPWD - Elec Vol-VI, 2023-2024: Page No.02, Item No. 1.1.1) | m | 71.07 | 71.07 | 600.0 | False | None | None | False | None | False | 42642.0 | 0 |
| 3574727 | 129934 | None | code59 | Open Conduit System Supplying heavy gauge PVC conduit pipe25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted woodplugs in case of RCC ceiling and RCC wall/ stone structure orrawl plugs in case of brick walls and cement plastering thedamaged portion using heavy gauge saddles at an interval of 700mm using NF screws( -KPWD - Elec Vol-VI,2023-2024: Page No.02, Item No. 1.1.2) | m | 83.43 | 83.43 | 600.0 | False | None | None | False | None | False | 50058.0 | 0 |
| 3574728 | 129934 | None | code60 | Supplying heavy gauge PVC Conduit Pipe .... dia .......mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary 19/20 mm dia 2 mm thick( -KPWD - Elec Vol-VI, 2023-2024: Page No.02, Item No. 1.3.1) | m | 70.04 | 70.04 | 600.0 | False | None | None | False | None | False | 42024.0 | 0 |
| 3574729 | 129934 | None | code61 | Supplying heavy gauge PVC Conduit Pipe 25 mm dia 2mm mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary.( -KPWD - Elec Vol-VI, 2023-2024: Page No.02, Item No. 1.3.2) | m | 81.37 | 81.37 | 400.0 | False | None | None | False | None | False | 32548.0 | 0 |
| 3574730 | 129934 | None | code62 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe 32 mm dia.2.5 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., andrunning before concreting the slab. The conduit should be tiedto the reinforcement rods by using binding wires and unusedways of junction boxes and pipe ends should be coveredusing PVC end enclosures, run with 18SWG GI fish wire wherever necessary( -KPWD - Elec Vol-VI, 2023-2024: Page No.02, Item No. 1.2.3) | m | 106.09 | 106.09 | 500.0 | False | None | None | False | None | False | 53045.0 | 0 |
| 3574731 | 129934 | None | code63 | Supplying heavy gauge PVC Conduit Pipe 32 dia 2.5 mm thick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduit wherever necessary( -KPWD - Elec Vol-VI,2023-2024: Page No.02, Item No. 1.3.3) | m | 101.97 | 101.97 | 450.0 | False | None | None | False | None | False | 45886.5 | 0 |
| 3574732 | 129934 | None | code64 | Supplying 250 A 4 x 30 x 10 mm Aluminium Strips rated 3 phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolic/FRP/DMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete - 250 A 4 x 30 x 10 mm Aluminium Strips( -KPWD - Elec Vol-VI, 2023-2024: Page No.20, Item No. 5.40.2) | m | 3538.05 | 3538.05 | 60.0 | False | None | None | False | None | False | 212283.0 | 0 |
| 3574733 | 129934 | None | code65 | WIRES & CABLES
Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short point upto 3m from tapping point to out let via switch( -KPWD - Elec Vol-VI, 2023-2024: Page No.05, Item No. 2.1.1) | Point | 293.55 | 293.55 | 400.0 | False | None | None | False | None | False | 117420.0 | 0 |
| 3574734 | 129934 | None | code66 | WIRES & CABLES
Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch.( -KPWD - Elec Vol-VI, 2023-2024: Page No.05, Item No. 2.1.2) | Point | 405.82 | 405.82 | 210.0 | False | None | None | False | None | False | 85222.2 | 0 |
| 3574735 | 129934 | None | code67 | WIRES & CABLES
Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch( -KPWD - Elec Vol-VI, 2023-2024: Page No.05, Item No. 2.1.3) | Point | 587.1 | 587.1 | 175.0 | False | None | None | False | None | False | 102742.5 | 0 |
| 3574736 | 129934 | None | code68 | Supplying 6A flush type socket and 6Amps flush type SP switch either surface / flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. as per IS 1293 and IS 3654 A) 6 Amps 3/5 way( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.1.2) | Each | 151.41 | 151.41 | 125.0 | False | None | None | False | None | False | 18926.25 | 0 |
| 3574737 | 129934 | None | code69 | Supplying and mounting 2 Nos of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required. IS 3854 ( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.2) | Each | 175.1 | 175.1 | 55.0 | False | None | None | False | None | False | 9630.5 | 0 |
| 3574738 | 129934 | None | code70 | Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.- 1 mm2 ( -KPWD - Elec Vol-VI, 2023-2024: Page No.05, Item No. 2.3.1) | m | 19.57 | 19.57 | 1400.0 | False | None | None | False | None | False | 27398.0 | 0 |
| 3574739 | 129934 | None | code71 | Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 2.5 mm2 ( -KPWD - Elec Vol-VI,2023-2024: Page No.05, Item No. 2.3.3) | m | 43.26 | 43.26 | 300.0 | False | None | None | False | None | False | 12978.0 | 0 |
| 3574740 | 129934 | None | code72 | Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 4.00 mm2 ( -KPWD - Elec Vol-VI, 2023-2024: Page No.05, Item No. 2.3.4) | m | 64.89 | 64.89 | 3500.0 | False | None | None | False | None | False | 227115.0 | 0 |
| 3574741 | 129934 | None | code73 | Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 10.00 mm2 ( -KPWD - Elec Vol-VI, 2023-2024: Page No.05, Item No. 2.3.6) | m | 172.01 | 172.01 | 300.0 | False | None | None | False | None | False | 51603.0 | 0 |
| 3574742 | 129934 | None | code74 | Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supply conforming to ISS-374- 1979 and withdouble ball bearing system.- 48" Sweep (1200 mm) Regular model ( -KPWD - Elec Vol-VI, 2023-2024: Page No.30, Item No. 6.3.1) | Each | 3073.52 | 3073.52 | 35.0 | False | None | None | False | None | False | 107573.2 | 0 |
| 3574743 | 129934 | None | code75 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to theexistingboard together with supplying and fixing 5 A. ceiling rose,necessary length of 23 / 0.0076 inch PVC insulated twintwisted copper wire and wiring( -KPWD - Elec Vol-VI, 2023-2024: Page No.57, Item No. 13.10) | Nos | 176.13 | 176.13 | 30.0 | False | None | None | False | None | False | 5283.9 | 0 |
| 3574744 | 129934 | None | code76 | Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board.- 6A Lamp Holder( -KPWD - Elec Vol-VI, 2023-2024: Page No.10, Item No. 3.14.6) | Nos | 73.13 | 73.13 | 75.0 | False | None | None | False | None | False | 5484.75 | 0 |
| 3574745 | 129934 | None | code77 | pplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board.- 6A Bakelite Ceiling Rose( -KPWD - Elec Vol-VI, 2023-2024: Page No.06, Item No. 3.14.5) | Nos | 80.34 | 80.34 | 42.0 | False | None | None | False | None | False | 3374.28 | 0 |
| 3574746 | 129934 | None | code78 | Supplying of recess mounting non integrated type LED
down light15-18W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceilingclA, LED of Power/COB with CCT 6500 degree K, CRI70%. efficacy 100 lumen per W, 120degree beam spread,life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosedwith anti glare opal diffuser which enhances the lightinglevel. LED's are driven by HF electronic driver integrated in aseparate control gear assembly., with PF 0.95, power lossshould 5% of lamp Wage, short circuit & open circuitprotection to be integrated in the circuit, THD less than 20%,Life as per LM 79. The operating input voltage should bebetween 130 to 275 V. BIS Approved and Tested byNABL/CPRI accredited laboratory with 2 years Warrantyagainst any manufacturing defect working under standard electrical condition.- 15-18W( -KPWD - Elec Vol-VI, 2023-2024: Page No.44, Item No.11.4.3) | Each | 1721.13 | 1721.13 | 40.0 | False | None | None | False | None | False | 68845.2 | 0 |
| 3574747 | 129934 | None | code79 | Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.- 15" Sweep (450 mm)( -KPWD - Elec Vol-VI, 2023-2024: Page No.30, Item No. 6.2.2) | Each | 4579.38 | 4579.38 | 7.0 | False | None | None | False | None | False | 32055.66 | 0 |
| 3574748 | 129934 | None | code80 | Fixing one exhaust fan after making a suitable notch in the
wall and finishing with cement mortar and colouring to matchthe existing wall or brackets, with bolts and nuts and a 5 A,ceiling rose with sufficient length of 23 / 0.0076 inch PVCinsulated twin core wire of approved make with wire meshand wooden frame.( -KPWD - Elec Vol-VI, 2022-23: Page No.57, Item No. 13.13) | Each | 728.21 | 728.21 | 17.0 | False | None | None | False | None | False | 12379.57 | 0 |
| 3574749 | 129934 | None | code81 | Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps( -KPWD - Elec Vol-VI,2023-2024: Page No.14, Item No. 5.7.3) | Each | 413.03 | 413.03 | 50.0 | False | None | None | False | None | False | 20651.5 | 0 |
| 3574750 | 129934 | None | code82 | Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 100 Amps( -KPWD - Elec Vol-VI, 2023-2024: Page No.14, Item No. 5.7.4) | Each | 711.73 | 711.73 | 40.0 | False | None | None | False | None | False | 28469.2 | 0 |
| 3574751 | 129934 | None | code83 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps DP( -KPWD - Elec Vol-VI, 2023-2024: Page No.17, Item No. 5.18.4) | Each | 761.17 | 761.17 | 40.0 | False | None | None | False | None | False | 30446.8 | 0 |
| 3574752 | 129934 | None | code84 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps DP( -KPWD - Elec Vol-VI, 2023-2024: Page No.17, Item No. 5.18.6) | Each | 1135.06 | 1135.06 | 40.0 | False | None | None | False | None | False | 45402.4 | 0 |
| 3574753 | 129934 | None | code85 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps TPN( -KPWD - Elec Vol-VI, 2023-2024: Page No.17, Item No. 5.18.7) | Each | 1768.51 | 1768.51 | 15.0 | False | None | None | False | None | False | 26527.65 | 0 |
| 3574754 | 129934 | None | code86 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps TPN( -KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.18.9) | Each | 3180.64 | 3180.64 | 30.0 | False | None | None | False | None | False | 95419.2 | 0 |
| 3574755 | 129934 | None | code87 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated
painting Made out of 14 SWG MS enclosure.I - Single Door -16 Way SP & N ( -KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.19.5) | Each | 3019.96 | 3019.96 | 12.0 | False | None | None | False | None | False | 36239.52 | 0 |
| 3574756 | 129934 | None | code88 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door-12 Way SP & N( -KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.19.9) | Each | 2398.87 | 2398.87 | 7.0 | False | None | None | False | None | False | 16792.09 | 0 |
| 3574757 | 129934 | None | code89 | Supplying, fixing and wiring Residual current circuit breaker (RCCB)
240/450V upto 300mA sensitivity on existing wood/ panel board.-16A-25A 2 pole (KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.20.1) | Each | 4405.31 | 4405.31 | 2.0 | False | None | None | False | None | False | 8810.62 | 0 |
| 3574758 | 129934 | None | code90 | Supplying, fixing and wiring Residual current circuit breaker (RCCB)
240/450V upto 300mA sensitivity on existing wood/ panel board.-32-40A 2 pole(KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.20.4) | Each | 4695.77 | 4695.77 | 2.0 | False | None | None | False | None | False | 9391.54 | 0 |
| 3574759 | 129934 | None | code91 | Supplying, fixing and wiring Residual current circuit breaker (RCCB)
240/450V upto 300mA sensitivity on existing wood/ panel board.-32-40A 4 pole(KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.20.8) | Each | 5301.41 | 5301.41 | 4.0 | False | None | None | False | None | False | 21205.64 | 0 |
| 3574760 | 129934 | None | code92 | Supplying, fixing and wiring Residual current circuit breaker (RCCB)
240/450V upto 300mA sensitivity on existing wood/ panel board.-63 A 4 pole(KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.20.10) | Each | 5711.35 | 5711.35 | 3.0 | False | None | None | False | None | False | 17134.05 | 0 |
| 3574761 | 129934 | None | code93 | 2 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote-Ding Dong Bell(KPWD - Elec Vol-VI, 2023-2024: Page No.48, Item No. 12.2.1) | Each | 253.38 | 253.38 | 5.0 | False | None | None | False | None | False | 1266.9 | 0 |
| 3574762 | 129934 | None | code94 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall1-3 Way( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.4.2) | Each | 163.77 | 163.77 | 20.0 | False | None | None | False | None | False | 3275.4 | 0 |
| 3574763 | 129934 | None | code95 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall4-5 Way( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.4.3) | Each | 182.31 | 182.31 | 20.0 | False | None | None | False | None | False | 3646.2 | 0 |
| 3574764 | 129934 | None | code96 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall6 Way( -KPWD - Elec Vol-VI, 2023-2024: Page No.05, Item No. 3.4.4) | Each | 226.6 | 226.6 | 20.0 | False | None | None | False | None | False | 4532.0 | 0 |
| 3574765 | 129934 | None | code97 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall8 Way( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.4.5) | Each | 268.83 | 268.83 | 20.0 | False | None | None | False | None | False | 5376.6 | 0 |
| 3574766 | 129934 | None | code98 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall10-12 Way ( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.4.6) | Each | 328.57 | 328.57 | 20.0 | False | None | None | False | None | False | 6571.4 | 0 |
| 3574767 | 129934 | None | code99 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall 18 Way( -KPWD - Elec Vol-VI,2023-2024: Page No.08, Item No. 3.4.8) | Each | 417.15 | 417.15 | 20.0 | False | None | None | False | None | False | 8343.0 | 0 |
| 3574768 | 129934 | None | code100 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box1 to 3 Module( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.5.2) | Each | 165.83 | 165.83 | 20.0 | False | None | None | False | None | False | 3316.6 | 0 |
| 3574769 | 129934 | None | code101 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box4 Module( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.5.3) | Each | 180.25 | 180.25 | 20.0 | False | None | None | False | None | False | 3605.0 | 0 |
| 3574770 | 129934 | None | code102 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box6 Module( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.5.4) | Each | 241.02 | 241.02 | 20.0 | False | None | None | False | None | False | 4820.4 | 0 |
| 3574771 | 129934 | None | code103 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box8 Module( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.5.5) | Each | 292.52 | 292.52 | 20.0 | False | None | None | False | None | False | 5850.4 | 0 |
| 3574772 | 129934 | None | code104 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box10-12 Module( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.5.6) | Each | 354.32 | 354.32 | 20.0 | False | None | None | False | None | False | 7086.4 | 0 |
| 3574773 | 129934 | None | code105 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 18 Module( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.5.8) | Each | 470.71 | 470.71 | 20.0 | False | None | None | False | None | False | 9414.2 | 0 |
| 3574774 | 129934 | None | code106 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch ( -KPWD - Elec Vol-VI, 2023-2024: Page No.09, Item No. 3.6.1) | Each | 105.06 | 105.06 | 22.0 | False | None | None | False | None | False | 2311.32 | 0 |
| 3574775 | 129934 | None | code107 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch( -KPWD - Elec Vol-VI, 2023-2024: Page No.09, Item No. 3.6.2) | Each | 170.98 | 170.98 | 20.0 | False | None | None | False | None | False | 3419.6 | 0 |
| 3574776 | 129934 | None | code108 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket( -KPWD - Elec Vol-VI, 2023-2024: Page No.09, Item No. 3.6.3) | Each | 176.13 | 176.13 | 9.0 | False | None | None | False | None | False | 1585.17 | 0 |
| 3574777 | 129934 | None | code109 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch( -KPWD - Elec Vol-VI, 2023-2024: Page No.09, Item No. 3.6.7) | Each | 185.4 | 185.4 | 22.0 | False | None | None | False | None | False | 4078.8 | 0 |
| 3574778 | 129934 | None | code110 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket( -KPWD - Elec Vol-VI,2023-2024 Page No.09, Item No. 3.6.10) | Each | 243.08 | 243.08 | 23.0 | False | None | None | False | None | False | 5590.84 | 0 |
| 3574779 | 129934 | None | code111 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch( -KPWD - Elec Vol-VI, 2023-2024: Page No.09, Item No. 3.6.9) | Each | 335.78 | 335.78 | 23.0 | False | None | None | False | None | False | 7722.94 | 0 |
| 3574780 | 129934 | None | code112 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push( -KPWD - Elec Vol-VI, 2023-2024: Page No.09, Item No. 3.6.8) | Each | 182.31 | 182.31 | 5.0 | False | None | None | False | None | False | 911.55 | 0 |
| 3574781 | 129934 | None | code113 | Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2' - 9/10 W( -KPWD - Elec Vol-VI, 2023-2024: Page No.43, Item No. 11.3.1) | Each | 567.53 | 567.53 | 22.0 | False | None | None | False | None | False | 12485.66 | 0 |
| 3574782 | 129934 | None | code114 | Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 20/22 W( -KPWD - Elec Vol-VI, 2023-2024: Page No.43, Item No. 11.3.2) | Each | 710.7 | 710.7 | 22.0 | False | None | None | False | None | False | 15635.4 | 0 |
| 3574783 | 129934 | None | code115 | Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 36/40 W( -KPWD - Elec Vol-VI, 2023-2024: Page No.43, Item No. 11.3.3) | Each | 1307.07 | 1307.07 | 22.0 | False | None | None | False | None | False | 28755.54 | 0 |
| 3574784 | 129934 | None | code116 | Supply of round/square recess/surface mounted rolling
type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 5-6W( -KPWD - Elec Vol-VI, 2023-2024: Page No.44, Item No. 11.5.1) | Each | 588.13 | 588.13 | 20.0 | False | None | None | False | None | False | 11762.6 | 0 |
| 3574785 | 129934 | None | code117 | Supply of round/square recess/surface mounted rolling
type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W( -KPWD - Elec Vol-VI,2023-2024: Page No.44, Item No. 11.5.2) | Each | 911.55 | 911.55 | 20.0 | False | None | None | False | None | False | 18231.0 | 0 |
| 3574786 | 129934 | None | code118 | Supply of round/square recess/surface mounted rolling
type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 15-18W( -KPWD - Elec Vol-VI, 2023-2024: Page No.44, Item No. 11.5.3) | Each | 1363.72 | 1363.72 | 25.0 | False | None | None | False | None | False | 34093.0 | 0 |
| 3574787 | 129934 | None | code119 | Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board.-6A SP Switch-(KPWD - Elect,2023-2024: Page No.10, Item No. 3.14.1) | Nos | 56.65 | 56.65 | 25.0 | False | None | None | False | None | False | 1416.25 | 0 |
| 3574788 | 129934 | None | code120 | Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board. 6A Bell Buzzer( -KPWD - Elec Vol-VI, 2023-2024: Page No.05, Item No. 3.14.9) | Each | 133.9 | 133.9 | 4.0 | False | None | None | False | None | False | 535.6 | 0 |
| 3574789 | 129934 | None | code121 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes , having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of JOints complete. (Internal Work Exprored on Wall) 25mm Nominal OD Pipe (KPWD -SR, 2023-2024 VOL-01 Page No.122, Item No. 13.31.3) | m | 327.54 | 327.54 | 80.0 | False | None | None | False | None | False | 26203.2 | 0 |
| 3574790 | 129934 | None | code122 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of JOints complete.(Internal Work Exprored on Wall) 40mm Nominal OD Pipe (KPWD -SR, 2023-2024 VOL-01 Page No.122, Item No. 13.31.5) | m | 552.08 | 552.08 | 75.0 | False | None | None | False | None | False | 41406.0 | 0 |
| 3574791 | 129934 | None | code123 | Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE Grade PE80-PN6.0,110mm dia(PWD SR 2023-2024, Vol-V, Pg No-95, It No-9.1.4) | m | 483.07 | 483.07 | 80.0 | False | None | None | False | None | False | 38645.6 | 0 |
| 3574792 | 129934 | None | code124 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P.brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of three urinal basins with 10litre white P.V.C. automatic flush ing cistern(PWD SR 2023-2024, V-II, Pg No-131, It No-14.4.3) | Each | 9738.65 | 9738.65 | 4.0 | False | None | None | False | None | False | 38954.6 | 0 |
| 3574793 | 129934 | None | code125 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fix tures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (PWD SR 2023-2024, V-II, Pg No-131, It No-14.2.1) | Each | 4983.14 | 4983.14 | 4.0 | False | None | None | False | None | False | 19932.56 | 0 |
| 3574794 | 129934 | None | code126 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (PWD SR 2023-2024, V-II, Pg No-132, It No-14.7.1) | Each | 3174.46 | 3174.46 | 3.0 | False | None | None | False | None | False | 9523.38 | 0 |
| 3574795 | 129934 | None | code127 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm(PWD SR 2023-2024, V-II, Pg No-136, It No-14.32.2) | Each | 1048.54 | 1048.54 | 3.0 | False | None | None | False | None | False | 3145.62 | 0 |
| 3574796 | 129934 | None | code128 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (PWD SR 2023-2024, V-II, Pg No-131, It No-14.1.1) | Each | 5030.52 | 5030.52 | 2.0 | False | None | None | False | None | False | 10061.04 | 0 |
| 3574797 | 129934 | None | code129 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. (PWD SR 2023-2024, V-II, Pg No-137, It No-14.40.1) | Each | 492.34 | 492.34 | 3.0 | False | None | None | False | None | False | 1477.02 | 0 |
| 3574798 | 129934 | None | code130 | Providing and fixing unplasticised PVC connection pipe with brass unions :15 mm nominal bore (PWD SR 2023-2024, V-II, Pg No-118, It No-13.8.1.1) | Nos | 85.49 | 85.49 | 8.0 | False | None | None | False | None | False | 683.92 | 0 |
| 3574799 | 129934 | None | code131 | S.C.I. gully or nahani grating 100 mm dia(PWD SR 2023-2024, V-II, Pg No-A34, It No-735) | Nos | 32.0 | 32.0 | 4.0 | False | None | None | False | None | False | 128.0 | 0 |
| 3574800 | 129934 | None | code132 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore: (PWD SR2023-2024, V-II, Pg No-117, It No-13.2.1) | Nos | 294.58 | 294.58 | 20.0 | False | None | None | False | None | False | 5891.6 | 0 |
| 3574801 | 129934 | None | code133 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore (PWD SR 2023-2024, V-II, Pg No-117, It No-13.5.2) | Nos | 323.42 | 323.42 | 20.0 | False | None | None | False | None | False | 6468.4 | 0 |
| 3574802 | 129934 | None | code134 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (PWD SR 2023-2024, V-II, Pg No-121, It No-13.24) | Nos | 170.98 | 170.98 | 20.0 | False | None | None | False | None | False | 3419.6 | 0 |