| 1723098137000 | 0 | None | None | Buildings | 1Construction work of community hall near Annanagar Mariamma Temple of Ward No. 12 under Bhadravati CMC limit.Rs 5.00 lakhs 2) Construction work of community hall near Syed Sadat Dargah of Ward No. 17 under Bhadravati CMC limit Rs 5.00 lakhs | 846040.81 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3720537 | 137818 | None | Code01 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. (2023-23 Pwd Common Common SR,Vol.I P.No 5 I.No 1.4.1) | Cum | 249.26 | 249.26 | 6.8343 | False | None | None | False | None | False | 1703.517618 | 0 | | 3720538 | 137818 | None | Code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately)including formworkMix 1:4:8( M 7.5) Using 40 mm nominal size graded crushed coarse aggregates 2023-24 PWD Common SR,Vol.I P.No 15 I.no 2.1.2 | Cum | 5833.92 | 5833.92 | 4.1688 | False | None | None | False | None | False | 24320.445696 | 0 | | 3720539 | 137818 | None | Code03 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) including formwork M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Common SR,Vol.I P.No 16 I.no 2.3.1) | Cum | 6708.07 | 6708.07 | 1.7279 | False | None | None | False | None | False | 11590.874153 | 0 | | 3720540 | 137818 | None | Code04 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) including formwork M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for BEams and lintles and Roof of Building (Common SR,Vol.I P.No 16 I.no 2.5.1) | Cum | 11609.13 | 11609.13 | 1.3041 | False | None | None | False | None | False | 15139.466433 | 0 | | 3720541 | 137818 | None | Code05 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) stone hammerd dressed in course not less than 20 cms high, bond stone at two m, apart in each course including cost of materials, labour, curing complete as per specifications. Common SR,Vol.II P.No 9 I.no 5.4 | Cum | 6580.67 | 6580.67 | 1.2717 | False | None | None | False | None | False | 8368.638039 | 0 | | 3720542 | 137818 | None | Code06 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) stone hammerd dressed in course not less than 20 cms high, bond stone at two m, apart in each course including cost of materials, labour, curing complete as per specifications. Common SR,Vol.II P.No 9 I.no 5.4 | Cum | 6580.67 | 6580.67 | 0.6048 | False | None | None | False | None | False | 3979.989216 | 0 | | 3720543 | 137818 | None | Code07 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) including formwork M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Common SR,Vol.I P.No 16 I.no 2.3.1) | Cum | 9769.03 | 9769.03 | 0.2733 | False | None | None | False | None | False | 2669.875899 | 0 | | 3720544 | 137818 | None | Code08 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications (Common SR,Vol.II P.No 17 I.No. 6.32) | Sqm | 1349.3 | 1349.3 | 36.407 | False | None | None | False | None | False | 49123.9651 | 0 | | 3720545 | 137818 | None | Code09 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) including formwork M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for BEams and lintles and Roof of Building (Common SR,Vol.I P.No 17 I.no 2.5.1) | Cum | 10926.24 | 10926.24 | 2.3453 | False | None | None | False | None | False | 25625.310672 | 0 | | 3720546 | 137818 | None | Code10 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) including formwork M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for BEams and lintles and Roof of Building (Common SR,Vol.I P.No 17 I.no 2.5.1) | Cum | 10243.35 | 10243.35 | 6.673 | False | None | None | False | None | False | 68353.87455 | 0 | | 3720547 | 137818 | None | Code11 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.2023-24 Common SR,Vol.I P.No 18 I.no 2.11 a Buildings | Tonne | 92140.71 | 92140.71 | 0.7683 | False | None | None | False | None | False | 70791.707493 | 0 | | 3720548 | 137818 | None | Code12 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(2023-24 PWD Common SR,Vol.II P.No 41 I.no 8.3.2) | Sqm | 342.99 | 342.99 | 175.5172 | False | None | None | False | None | False | 60200.644428 | 0 | | 3720549 | 137818 | None | Code13 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 2023-24 PWD SR,Vol.II P.No 41 I NO 8.4.1 | Sqm | 332.69 | 332.69 | 47.3264 | False | None | None | False | None | False | 15745.020016 | 0 | | 3720550 | 137818 | None | Code14 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm .2023-24 Common SR,Vol.II P.No 61 i no 9.17.2 | Sqm | 1210.25 | 1210.25 | 95.8809 | False | None | None | False | None | False | 116039.859225 | 0 | | 3720551 | 137818 | None | Code15 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as per direction of Engineer in charge..2021-22 Pwd Common SR,Vol.II P.No 62 I NO 9.19 | Sqm | 1269.99 | 1269.99 | 54.366 | False | None | None | False | None | False | 69044.27634 | 0 | | 3720552 | 137818 | None | Code16 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Common SR,Vol.II P.No 77 i.no 11.11.1 | Kg | 152.44 | 152.44 | 144.0 | False | None | None | False | None | False | 21951.36 | 0 | | 3720553 | 137818 | None | Code17 | Providing and fixing plain rolled glass 3mm thick with teakwood beading of 10mm thick.
Common SR,Vol.II P.No 183 I no 20.106 | Sqm | 1114.46 | 1114.46 | 5.76 | False | None | None | False | None | False | 6419.2896 | 0 | | 3720554 | 137818 | None | Code18 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge..2023-24 Pwd Common SR,Vol.II P.No 77 I NO 11.5.1 | Sqm | 4612.34 | 4612.34 | 2.52 | False | None | None | False | None | False | 11623.0968 | 0 | | 3720555 | 137818 | None | Code19 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Common SR,Vol.II P.No 45 i no 8.25 | Sqm | 141.11 | 141.11 | 280.8364 | False | None | None | False | None | False | 39628.824404 | 0 | | 3720556 | 137818 | None | Code20 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Common SR,Vol.II P.No 45 I.no 8.28 | Sqm | 91.67 | 91.67 | 192.0472 | False | None | None | False | None | False | 17604.966824 | 0 | | 3720557 | 137818 | None | Code21 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Common SR,Vol.II P.No 48 i no 8.41 | Sqm | 172.01 | 172.01 | 28.23 | False | None | None | False | None | False | 4855.8423 | 0 | | 3720558 | 137818 | None | Code22 | Supplying heavy gauge PVC conduit pipe mm
dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick Electrical PWD SR 2023-24 p.no 2 i.no 1.2.2 | m | 78.0 | 78.0 | 25.0 | False | None | None | False | None | False | 1950.0 | 0 | | 3720559 | 137818 | None | Code23 | Supplying and fixing PVC/metal conduit Deep junction box 32mm junction box Electrical PWD SR 2023-24 p.no 3 i no 1.5.3 | Each | 61.0 | 61.0 | 8.0 | False | None | None | False | None | False | 488.0 | 0 | | 3720560 | 137818 | None | Code24 | Supplying heavy gauge PVC Conduit Pipe .... dia mm
thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25 mm dia 2 mm thick Electrical PWD SR 2023-24 p.no 2 i no 1.3.2 | m | 61.0 | 61.0 | 4.0 | False | None | None | False | None | False | 244.0 | 0 | | 3720561 | 137818 | None | Code25 | Supplying heavy gauge PVC Conduit Pipe .... dia mm
thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25 mm dia 2 mm thick Electrical PWD SR 2023-24 p.no 2 i no 1.3.2 | m | 79.0 | 79.0 | 6.0 | False | None | None | False | None | False | 474.0 | 0 | | 3720562 | 137818 | None | Code26 | Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3m from tapping point to out let via switch PWD SR 2023-24 vol no 6 p.no 5 i no 2.1.1 | Point | 285.0 | 285.0 | 2.0 | False | None | None | False | None | False | 570.0 | 0 | | 3720563 | 137818 | None | Code27 | Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch PWD SR 2023-24 vol no 6 p.no 5 i no 2.1.2 | Point | 394.0 | 394.0 | 2.0 | False | None | None | False | None | False | 788.0 | 0 | | 3720564 | 137818 | None | Code28 | Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch PWD SR 2023-24 vol no 6 p.no 5 i no 2.1.3 | Point | 570.0 | 570.0 | 2.0 | False | None | None | False | None | False | 1140.0 | 0 | | 3720565 | 137818 | None | Code29 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 mm2 PWD SR 2023-24 vol no 6 p.no 5 i no 2.3.3 | m | 42.0 | 42.0 | 61.5 | False | None | None | False | None | False | 2583.0 | 0 | | 3720566 | 137818 | None | Code30 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3 Way PWD SR 2023-24 vol no 6 p.no 8 i no 3.4.1 | Each | 128.0 | 128.0 | 2.0 | False | None | None | False | None | False | 256.0 | 0 | | 3720567 | 137818 | None | Code31 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 Way PWD SR 2023-24 vol no 6 p.no 8 i no 3.4.2 | Each | 159.0 | 159.0 | 2.0 | False | None | None | False | None | False | 318.0 | 0 | | 3720568 | 137818 | None | Code32 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1-3 Way PWD SR 2023-24 vol no 6 p.no 8 i no 3.5.1 | Each | 137.0 | 137.0 | 2.0 | False | None | None | False | None | False | 274.0 | 0 | | 3720569 | 137818 | None | Code33 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Module PWD SR 2023-24 vol no 6 p.no 8 i no 3.54 | Each | 234.0 | 234.0 | 2.0 | False | None | None | False | None | False | 468.0 | 0 | | 3720570 | 137818 | None | Code34 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket PWD SR 2023-24 vol no 6 p.no 9 i no 3.6.10 6/16A Universal Socket | Each | 236.0 | 236.0 | 3.0 | False | None | None | False | None | False | 708.0 | 0 | | 3720571 | 137818 | None | Code35 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch PWD SR 2023-24 vol no 6 p.no 9 i no 3.6.1 | Each | 102.0 | 102.0 | 6.0 | False | None | None | False | None | False | 612.0 | 0 | | 3720572 | 137818 | None | Code36 | Supplying & Fixing of 70-150 W lamp holder 2 Pin PWD SR 2023-24 vol no 6 p.no 52 i no 12.46 | Each | 63.0 | 63.0 | 5.0 | False | None | None | False | None | False | 315.0 | 0 | | 3720573 | 137818 | None | Code37 | Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 9W, 6500K PWD SR 2023-24 vol no 6 p.no 47 i no 11.11.4 | Each | 154.0 | 154.0 | 5.0 | False | None | None | False | None | False | 770.0 | 0 | | 3720574 | 137818 | None | Code38 | Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz ACsupply & completely wired on existing box.PWD SR 2023-24 vol no 6 p.no 9 i no 3.7 | Each | 646.0 | 646.0 | 1.0 | False | None | None | False | None | False | 646.0 | 0 | | 3720575 | 137818 | None | Code39 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP PWD SR 2023-24 vol no 6 p.no 17 i no 5.18.1 16-32 A SP | Each | 415.0 | 415.0 | 1.0 | False | None | None | False | None | False | 415.0 | 0 | | 3720576 | 137818 | None | Code40 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.Asbestos cement sheet 2023-24 Common SR,Vol.II P.No 189 . Item No 19.27.2 | Sqm | 52.53 | 52.53 | 21.76 | False | None | None | False | None | False | 1143.0528 | 0 | | 3720577 | 137818 | None | Code41 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specificationsM20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD Common SR,Vol.I P.No 15 I.no 2.2.1 | Cum | 10360.97 | 10360.97 | 1.3668 | False | None | None | False | None | False | 14161.373796 | 0 | | 3720578 | 137818 | None | Code42 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.2023-24 Pwd common SR, P.No 82 i.no 11.16.2 | Kg | 151.41 | 151.41 | 668.5922 | False | None | None | False | None | False | 101231.545002 | 0 | | 3720579 | 137818 | None | Code43 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.PWD common SR 2023-24 Vol:2 P.NO.26 i.no 7.38 | Sqm | 585.04 | 585.04 | 88.0 | False | None | None | False | None | False | 51483.52 | 0 | | 3720580 | 137818 | None | Code44 | Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter (600 mm over all girth)
PWD common SR 2023-24 Vol:2 P.NO.27 i.no 7.39.6 | m | 1106.22 | 1106.22 | 8.0 | False | None | None | False | None | False | 8849.76 | 0 | | 3720581 | 137818 | None | Code45 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,and using MS clamps (i) Single socketed pipes 100 mm diameter
PWD common SR 2023-24 Vol:2 P.NO 125 i.no 13.48 | m | 299.73 | 299.73 | 10.0 | False | None | None | False | None | False | 2997.3 | 0 | | 3720582 | 137818 | None | Code46 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(2023-24 PWD Common SR Vol II P.No 48 I.No 8.41 ) | Sqm | 172.01 | 172.01 | 37.4532 | False | None | None | False | None | False | 6442.324932 | 0 | | 3720583 | 137818 | None | Code47 | Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. PWD common SR 2023-24 Vol 2 P.No 59 Item no 9.1 | Sqm | 473.55 | 473.55 | 4.08 | False | None | None | False | None | False | 1932.084 | 0 |
|