createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1723191354588 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 540.00 emd 63750.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 17-08-2024 17:15:00 tenderQueryClose 16-08-2024 17:00:00 technicalBidOpen None publishedDate 09-08-2024 18:41:03 publishedByPost NAC_CO_BRG publishedByUser KPE12841 - MOHAMMED YOUSUF bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Rajwardhan reddy splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9844816262 tenderSupplierList None
tenderSchedule	createdTs 1723191354619 version 6 createdDate None modifiedDate None tenderNumber DMA/2024-25/BD/WORK_INDENT24628 title Construction of dry waste collection center with waste partition in Bheemarayanagudi description Construction of dry waste collection center category WORKS categoryText Works ecv 2122690.30 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2437 locationName DMA Notified Area Committee Bheemarayanagudi provisionalAmount 2550000.0 groupOverheadTotal None fileNumber 15F23241
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1723191355000 0 None None Buildings Construction of dry waste collection center with waste partition in Bheemarayanagudi 2122690.3 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3736492 139188 None code17 Main Panel Incomer : MCCB TPN 63A with CBCT ELR & Ph indicators, meter section with all parameters as required 100A 4 Wire 25kA 415V Aluminium busbars compartment, Outgoings: 63A MCCB feeder- 01No, Outgoings: 16A MPCB feeder - 01Nos, Outgoings: 16A MPCB feeder - 02Nos, Outgoings: 63/40A MCB feeder- 08Nos Each 65000.0 65000.0 1.0 False None None False None False 65000.0 0 3736493 139188 None code18 Sub panel-1, Incomer : MCB TPN 63A with CBCT ELR & Ph indicators, section with all parameters as required, 63A 4 Wire 16kA 415V Aluminium busbars compartment, Outgoings: 40/63A 4P MCB feeder- 10No, Outgoings: 32A Industrial socket-02Nos, Outgoings: 16A Industrial socket-02Nos. No 35000.0 35000.0 1.0 False None None False None False 35000.0 0 3736494 139188 None code19 Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included, 3.5Cx50 Sqmm Al Ar cable Mtr 300.0 300.0 15.0 False None None False None False 4500.0 0 3736495 139188 None code20 4Cx25 Sqmm Al Ar cable Mtr 180.0 180.0 20.0 False None None False None False 3600.0 0 3736496 139188 None code21 4Cx16 Sqmm Al Ar cable Mtr 120.0 120.0 20.0 False None None False None False 2400.0 0 3736497 139188 None code22 4Cx10 Sqmm Cu Ar cable Mtr 332.0 332.0 1.0 False None None False None False 332.0 0 3736498 139188 None code23 4Cx6.0 Sqmm Cu Ar cable Mtr 256.0 256.0 1.0 False None None False None False 256.0 0 3736499 139188 None code24 3Cx6.0 Sqmm Cu Un Ar cable Mtr 316.0 316.0 1.0 False None None False None False 316.0 0 3736500 139188 None code25 3Cx4.0 Sqmm Cu Un Ar cable Mtr 300.0 300.0 1.0 False None None False None False 300.0 0 3736501 139188 None code26 Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class. 3.5Cx50 Sqmm Al Ar cable Set 200.0 200.0 1.0 False None None False None False 200.0 0 3736502 139188 None code27 4Cx25 Sqmm Al Ar cable Set 67.2 67.2 2.0 False None None False None False 134.4 0 3736503 139188 None code28 4Cx16 Sqmm Al Ar cable Set 67.2 67.2 2.0 False None None False None False 134.4 0 3736504 139188 None code29 4Cx10 Sqmm Cu Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3736505 139188 None code30 4Cx6.0 Sqmm Cu Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3736506 139188 None code31 3Cx6.0 Sqmm Cu Un Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3736507 139188 None code32 3Cx4.0 Sqmm Cu Un Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3736508 139188 None code33 Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.70 Sqmm Al Ar cable (tinned copper lug) Set 250.0 250.0 1.0 False None None False None False 250.0 0 3736509 139188 None code34 25 Sqmm Al Ar cable (tinned copper lug) Set 16.0 16.0 2.0 False None None False None False 32.0 0 3736510 139188 None code35 16 Sqmm Al Ar cable (tinned copper lug) Set 9.95 9.95 2.0 False None None False None False 19.9 0 3736511 139188 None code36 10 Sqmm Cu Ar cable (tinned copper lug) Set 6.4 6.4 1.0 False None None False None False 6.4 0 3736512 139188 None code37 6.0 Sqmm Cu Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 3736513 139188 None code38 6.0 Sqmm Cu Un Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 3736514 139188 None code39 4.0 Sqmm Cu Un Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 3736515 139188 None code40 Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall/RCC slab or exposed on fixing invrted wood plugs in case of RCC ceiling and RCC wall/stone structure or rawl plugs in case of brick wall & cement plastering the damaged portion using heavy gauage saddles at interval of 700mm using NF screws 19/20mm dia PVC 2mm thick conduit Mtr 68.0 68.0 10.0 False None None False None False 680.0 0 3736516 139188 None code41 25mm dia PVC 2mm thick conduit Mtr 80.0 80.0 10.0 False None None False None False 800.0 0 3736517 139188 None code42 Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for point wiring laid in existing conduit. Light point upto 3Mtr from switch board Nos 276.0 276.0 1.0 False None None False None False 276.0 0 3736518 139188 None code43 Light point above 3M upto 6Mtr from switch board Nos 386.0 386.0 1.0 False None None False None False 386.0 0 3736519 139188 None code44 Light point above 6M upto 10Mtr from switch board Nos 567.0 567.0 1.0 False None None False None False 567.0 0 3736520 139188 None code45 Light point above 3Mtr upto 6Mtr from switch board Nos 721.0 721.0 1.0 False None None False None False 721.0 0 3736521 139188 None code46 Light point above 6Mtr upto 10Mtr from switch board Nos 721.0 721.0 1.0 False None None False None False 721.0 0 3736522 139188 None code47 Light point above 6Mtr upto 10Mtr from switch board Nos 1054.0 1054.0 3.0 False None None False None False 3162.0 0 3736523 139188 None code48 Circuit main wiring Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit.1.0 Sqmm Cu FRLS wire Mtr 18.0 18.0 100.0 False None None False None False 1800.0 0 3736524 139188 None code49 1.5 Sqmm Cu FRLS wire Mtr 26.0 26.0 100.0 False None None False None False 2600.0 0 3736525 139188 None code50 2.5 Sqmm Cu FRLS wire Mtr 40.0 40.0 100.0 False None None False None False 4000.0 0 3736526 139188 None code51 4.0 Sqmm Cu FRLS wire Mtr 59.0 59.0 30.0 False None None False None False 1770.0 0 3736527 139188 None code52 6.0 Sqmm Cu FRLS wire Mtr 115.0 115.0 30.0 False None None False None False 3450.0 0 3736528 139188 None code53 Switches & sockets outlets in Existing modular box 6A one way switch Nos 88.0 88.0 4.0 False None None False None False 352.0 0 3736529 139188 None code54 6A 5Pin socket Nos 162.0 162.0 2.0 False None None False None False 324.0 0 3736530 139188 None code55 Stepped fan regulator Nos 313.0 313.0 2.0 False None None False None False 626.0 0 3736531 139188 None code56 6/16A Universal socket Nos 249.0 249.0 2.0 False None None False None False 498.0 0 3736532 139188 None code57 Light fixture Supply & fixing of 50W LED light fixture IP 65, included screws accessoris Etc..Considered outdoor type light fitting for equivalent. Nos 7390.0 7390.0 8.0 False None None False None False 59120.0 0 3736533 139188 None code58 Earthing 25x6mm GI Earth Strip, Mtr 92.0 92.0 60.0 False None None False None False 5520.0 0 3736534 139188 None code59 8.0 SWG GI bare wire Mtr 15.2 15.2 50.0 False None None False None False 760.0 0 3736535 139188 None code60 Pipe earthing Supply & installation of GI PIPE Earthing as per IS:3043 with all installation details Nos 8000.0 8000.0 1.0 False None None False None False 8000.0 0 3736536 139188 None code01 Earth work in surface excavation by manual means for lowering & levellingthe ground by chiselling and wedging in Hard rock for all works other than foundation & depth not exceeding 100 mm as per drawing and technical specifications, including setting out, barricading, caution lights, dressing of excavated surfaces, disposing off the excavated spalls/stuff & stacking the selected spall/ stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.(Item No. 1.3 Page No. 5 Vol.1 PWD SR) Cum 185.85 185.85 400.0 False None None False None False 74340.0 0 3736537 139188 None code02 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work In Hard Rock ( requiring blasting) Depth upto 1.50m (Item No. 1.16.1 Page No. 8 Vol.1 PWD SR) Cum 581.7 581.7 71.91 False None None False None False 41830.047 0 3736538 139188 None code03 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (Item No. 2.1.2 Page No. 15 Vol.1 PWD SR) Cum 5947.2 5947.2 11.64 False None None False None False 69225.408 0 3736539 139188 None code04 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Item No. 2.3.2 Page No. 16 Vol.1 PWD SR & Appendix I page No.115) Cum 7348.32 7348.32 11.66 False None None False None False 85681.4112 0 3736540 139188 None code05 Column base plus 8 percent (centering Charges) Cum 11566.8 11566.8 2.92 False None None False None False 33775.056 0 3736541 139188 None code06 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Item No. 2.2.3 Page No. 15 Vol.1 PWD SR & Appendix I page No.115) Cum 9979.2 9979.2 5.4 False None None False None False 53887.68 0 3736542 139188 None code07 plus 50 percent (centering Charges) Cum 6918.91 6918.91 15.0 False None None False None False 103783.65 0 3736543 139188 None code08 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Item No. 2.11 Page No. 18 Vol.1 PWD SR) Kg 93.93 93.93 2144.6 False None None False None False 201442.278 0 3736544 139188 None code09 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR) Cum 6708.45 6708.45 22.48 False None None False None False 150805.956 0 3736545 139188 None code10 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage & all other appurtenaces required to complete the work. (Item No. 1.8 Page No. 7 Vol.1 PWD SR) Cum 497.7 497.7 76.25 False None None False None False 37949.625 0 3736546 139188 None code11 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..(Item No. 8.2.1, Page No. 41, Vol.2) Sqm 309.75 309.75 36.0 False None None False None False 11151.0 0 3736547 139188 None code12 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. (Item No. 11.2, Page No. 77, Vol.2) Kg 118.65 118.65 6500.0 False None None False None False 771225.0 0 3736548 139188 None code13 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Item No. 7.38, Page No. 26, Vol.2) Sqm 585.04 585.04 342.0 False None None False None False 200083.68 0 3736549 139188 None code14 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge.(Item No. 8.54.1, Page No. 50, Vol.2) Each 76.65 76.65 36.0 False None None False None False 2759.4 0 3736550 139188 None code15 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Item No. 11.6.1, Page No. 76, Vol.2) Sqm 2764.65 2764.65 18.0 False None None False None False 49763.7 0 3736551 139188 None code16 Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Item No. 11.8.4, Page No. 77, Vol.2) Each 25920.3 25920.3 1.0 False None None False None False 25920.3 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1723191355000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1723191355000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1723191355000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1723191355000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1723191355000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1723191355000 0 None None ELIGIBILITY Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None 1723191355000 0 None None ELIGIBILITY Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None 1723191355000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1723191355000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1723191355000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1723191355000 0 None None ELIGIBILITY List of existing commitments and ongoing works None 1723191355000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1723191355000 0 None None ELIGIBILITY Banker Details for reference None 1723191355000 0 None None ELIGIBILITY Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None 1723191355000 0 None None ELIGIBILITY Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None 1723191355000 0 None None ELIGIBILITY Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None 1723191355000 0 None None ELIGIBILITY Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached) None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText KPWD Registered Class-IV & Above Civil Contractor Licence True Technical Bid Annual Turnover Certificate last five years i.e., 2019-20 to 2023-24 achieved in at least two financial years a minimum annual turnover of RS 25.50 lakhs. True Technical Bid Line of credit of Rs. 7.65 Lakhs in prescribed format True Technical Bid Satisfactory completed, at least one similar or building nature work of value not less than Rs 12.75 Lakhs. True Technical Bid GST Registration Copy True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None