| 1723202767000 | 0 | None | None | Buildings | CONSTRUCTION OF SWM BUILDING | 920424.52 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3738910 | 139348 | None | HIRIYUR001 | Providing and laying flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete, using broken granite metal of 12.5mm nominal size and top layer of 10mm thick plaster with cement mortar 1:3, finished with floating coat of neat cement , including cost of materials, labour, curing, complete as per specifications. Specification No. KBS 14.3 | Sqm | 539.31 | 539.31 | 98.16 | False | None | None | False | None | False | 52938.6696 | 0 | | 3738911 | 139348 | None | HIRIYUR002 | Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. -do- TMT bars Fe 500 | Tonne | 89282.43 | 89282.43 | 1.73 | False | None | None | False | None | False | 154458.6039 | 0 | | 3738912 | 139348 | None | HIRIYUR003 | Providing and constructing load bearing wall with solid concrete blocks having block density not less than 1800 kg/m3 having a minimum average compressive strength of 5.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc., complete as per specifications | Sqm | 908.19 | 908.19 | 145.05 | False | None | None | False | None | False | 131732.9595 | 0 | | 3738913 | 139348 | None | HIRIYUR004 | Providing 18mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. | Sqm | 209.29 | 209.29 | 366.66 | False | None | None | False | None | False | 76738.2714 | 0 | | 3738914 | 139348 | None | HIRIYUR005 | Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. | Sqm | 71.57 | 71.57 | 366.66 | False | None | None | False | None | False | 26241.8562 | 0 | | 3738915 | 139348 | None | HIRIYUR006 | Providing of weld mesh 75 x 25 mm of 6G to 10G. (Market Rate) | Sqm | 249.15 | 249.15 | 95.2 | False | None | None | False | None | False | 23719.08 | 0 | | 3738916 | 139348 | None | HIRIYUR007 | Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside & outside locking with push & pull operations complete including pulling hooks, 4Nos. handles with all fittings and accessories painted with a coat of red lead paint (without top cover) cost of materials, labour, HOM of machinery complete as per specifications. Shutter size 3mx2.8 m | Sqm | 2389.31 | 2389.31 | 7.5 | False | None | None | False | None | False | 17919.825 | 0 | | 3738917 | 139348 | None | HIRIYUR008 | Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting , materials, labour, HOM of machinery complete as per specifications. | Sqm | 424.1 | 424.1 | 3.0 | False | None | None | False | None | False | 1272.3 | 0 | | 3738918 | 139348 | None | HIRIYUR009 | METALLIC DOOR SHUTTERS - Door Shutter - Entrance : Providing and fixing factory made Galvanized steel door shutters 32 mm thick manufactured from pre painted Galvanized plain steel sheet 0.60 mm thick confirming to the IS : 14246. The door shutters consist of two outer skins if steel sheets, lock seam jointed at vertical stile edges, horizontal top and bottom sides to form a double skin fully flush shell. Rigid polyurethane Foam (PUF) of density 40 Kg/Cum shall be filled in the hollow portion of door shutters for structure rigidly & sound insulation. The necessary stiffeners of the Galvanized plain steel sheet of minimum thickness 1.60 mm to be provided for fixing all hardware fixtures. The rate is including transportation, loading unloading HOM etc. but excluding the hardware fixtures. Door Shutters - Internal. -Do- for Size -- 800 x 2035 x 32 mm thick. | Sqm | 2500.0 | 2500.0 | 5.04 | False | None | None | False | None | False | 12600.0 | 0 | | 3738919 | 139348 | None | HIRIYUR010 | Providing and applying enamel metal paint two coats ( excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications. | Sqm | 80.48 | 80.48 | 25.08 | False | None | None | False | None | False | 2018.4384 | 0 | | 3738920 | 139348 | None | HIRIYUR011 | Fabricating, supplying & erecting M.S. angular Truss of span upto 10m. The bottom & top member is provided with 50x50x6mm double equal angles, welded back to back and in between top & bottom line, in areas of mid section is provided with 50x50x6mm equal single angle for vertical and inclined members and at supporting ends 40x40x5mm single angle is provided. All the members are welded together with 6mm gusset plate as per Drawing No.CBS/ SD/K-Mantap/9/MND/97. The entire truss is anchored in RCC column by using 4 Nos. of M.S. anchor bolts at each support, with 10mm thick base plate and shoe plate.The work includes cutting, straightening, placing in position of M.S angle and wleding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, & hire charges of machineries for cutting, welding, grinding& erection equipments, etc., complete as per specification | Kg | 99.13 | 99.13 | 1954.0 | False | None | None | False | None | False | 193700.02 | 0 | | 3738921 | 139348 | None | HIRIYUR012 | Providing and installing of pre painted Galvalume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses. | Sqm | 770.0 | 770.0 | 247.65 | False | None | None | False | None | False | 190690.5 | 0 | | 3738922 | 139348 | None | HIRIYUR013 | Providing and installing of approved make pre painted Galvalume iron Accessories, like, plain, ridges, plain gutter, plain flashing, corner Trim, etc. The total coated thickness (TCT) of the sheet shall be 0.47 mm +/- 0.02 tolerance mm Zinc-Alu Alloy coating AZ 150 gsm as per ASTM 1397/755 -550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling / self tapping screws of 25 mm length. (width upto 500-600 mm only), to be fixed over the existing purlins, rafters, channels and trusses. | Sqm | 740.0 | 740.0 | 12.18 | False | None | None | False | None | False | 9013.2 | 0 | | 3738923 | 139348 | None | HIRIYUR014 | Providing and laying reinforced cement concretecap of 1000 mm dia 100 mm thick as per detailed standard specifications including transportation, lifting lowering loading and unloading, supplying to site of work including transportation and constructing as per design and drawing complete as per the instructions of Engineer in charge at site. | Nos | 1041.2 | 1041.2 | 1.0 | False | None | None | False | None | False | 1041.2 | 0 | | 3738924 | 139348 | None | HIRIYUR015 | Supplying & errection of RCC rings for well steining of 0.3 m Depth using M-20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compacted including centering, from work and plastering for both faces with C.M 1:3 proportion as per design using 6.50mm M.S. coil at the rate of 10 Kgs/ring including cost of steel and fabrication, bailing out of water, errection etc., complete. For 1.20m dia (clear) rings of steining thickness 0.075mm upto 18 M depth | Nos | 793.7 | 793.7 | 5.0 | False | None | None | False | None | False | 3968.5 | 0 | | 3738925 | 139348 | None | HIRIYUR016 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour and lift charges, handling charges including encasing the pipe alround to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. for PVC PIPES OF 6 Kg./Cm2 63 mm . | Mtr | 142.16 | 142.16 | 20.0 | False | None | None | False | None | False | 2843.2 | 0 | | 3738926 | 139348 | None | HIRIYUR017 | Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. | Nos | 1169.41 | 1169.41 | 1.0 | False | None | None | False | None | False | 1169.41 | 0 | | 3738927 | 139348 | None | HIRIYUR018 | Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. | Nos | 3368.96 | 3368.96 | 1.0 | False | None | None | False | None | False | 3368.96 | 0 | | 3738928 | 139348 | None | HIRIYUR019 | Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) as per IS 12701 1996. Specification No.KBS 13.22 | Nos | 6541.6 | 6541.6 | 1.0 | False | None | None | False | None | False | 6541.6 | 0 | | 3738929 | 139348 | None | HIRIYUR020 | Providing Ceramic tiles of approved make,shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment , including cost of materials, labour, curing, complete as per specifications. -do- for Ceramic Tiles of size 15x15cms 6mm thick | Sqm | 977.77 | 977.77 | 8.64 | False | None | None | False | None | False | 8447.9328 | 0 |
|